Superior Supplying Quality Products To The ACR Industry Since 1938

Transcription

1 Catalog No. R-200 Superior Supplying Quality Products To The CR Industry Since 98 ir Conditioning and Refrigeration Valves, Wrot and Flare Fittings, and ccessories

2

3 Catalog No. R-200 ir Conditioning and Refrigeration Valves, Wrot and Flare Fittings, and ccessories Table of Contents Contents Page Integra-Seal all Valves W Series(Welded) Line Valves - Tuffy Series Diaphragm Packless Valves LPD Globe Valves Globe and ngle Valves H-V Check Valves Horizontal or Vertical Installation In-Line Check Valves... 6 Liquid Indicators and Sight Glasses Dual Pressure Relief Valve ssembly 8-9 Pressure Relief Valves Series Relief Valve Capacity Equations Packed ngle Valves Straight Tube Heat Exchangers Superheater II Features and Specifications Copper Filter-Driers ll Molecular Sieve Filter-Driers for Moisture and cid Removal Filter and Drier Cartridges For 4 Inch OD Steel Shells Suction Line Filters Type CF Uni-Form Shell and Replaceable Cartridges Suction Line Cores for CF Shells 2,, 4, and Temporary cid Removal Suction Line Cores for Temporary Installation in Place of F or DF Cartridges... - Liquid Line Cores for CF Shells CD, CD4, and CD Char-Core Liquid Line Cores Service Tools Water ubbler Flare Fittings Wrot Copper Fittings Joining Processes (Soldering and razing) Engineering Data Wrot Copper Fittings Spare Parts List Codes, Regulations, and Specifications COPYRIGHT, HRSCO CORPORTION, 999

4 all Valves W Series (Welded) WS Series (Welded with ccess Fitting) Robotically Welded ody Joint! Full Size Ports for Unrestricted Flow! The new line of ball valves employ the latest robotic welding technology. Every continuous welded body joint is 00% factory tested to ensure positively leak-free performance. Dual Teflon* ball seals surround a polished brass or chrome plated steel ball at each end. secondary seal becomes effective if foreign material scores the primary seal... even in extremely unfavorable conditions such as compressor burnout a Superior exclusive! ball valves are constructed using all forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions another Superior exclusive! Full open to full close with turn. ll sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal a third Superior exclusive! There are no synthetic O rings. all internal relief port design ensures shut-off in either direction of flow... even during evacuation of the system. Full flow ports in all sizes " through ". ll ball valves are nondirectional flow and may be installed in any position. *Registered Trademark of Dupont W Series WS Series (with ccess Fitting) Seal Cap Size (Inches) Catalog IC With ccess IC Connection all Port Weight (Pounds) Number Number Fitting Number (ODS) Diameter W WS 86W-6ST 86 86WS-6ST W-8ST WS-8ST W-0ST WS-0ST W-2ST N/ 8W-4ST 884 8WS-4ST W-ST 86 9WS-ST W-ST WS-ST W-ST 89 9WS-ST W-2ST WS-2ST W-2ST** N/ 94W-ST** N/ 9W-2ST 602 9WS-2ST W-ST 94 96WS-ST W-ST** N/ 96W-4ST** N/ **Reduced Ports METRIC SIZES VILLE 86WV-0MM MM N/ 86WV-2MM 89 2MM N/ 86WV-MM 894 Consult Factory For MM N/ 86WV-6MM 806 vailability of ccess 6MM N/ 8WV-8MM 898 Fittings in Metric Sizes 8MM 0..0 N/ 8WV-22MM 809 or For Other Sizes Not 22MM 0..0 N/ 9WV-28MM 9082 Shown 28MM N/ 92WV-MM 908 MM.0.8 N/ 9WV-42MM 98 42MM.0.8 N/ OPEN CLOSE Seal Cap Exclusive Seal Cap design permits operation of valve without removal. Markings on cap top designates at-a-glance open or closed ball position. 2

5 W Series (Welded) WS Series (Welded with ccess Fitting) Full refrigeration service temperature range of -40 F to +2 F (-40 C to +49 C). Forged brass body and seal cap Design Working Pressure: 00 psig (6 kg/cm 2 ). U.L. and C-U.L. Listed File No. 462 (N) except for metric sizes. WS Series includes access fitting, strategically located on tube extension. No synthetic O ring seals. Double seal protection provides a Superior stem design. Polished brass or chrome plated steel ball. Seal cap design permits valve operation without removal of seal cap ll ball valves are suitable for use with R, R2, R22, R2, R2, R4, R402, R402, R404, R00, R02, and R0 and for industrial oxygen usages. (not U.L. Listed for oxygen). For gases or liquids not listed please consult factory. Spare Parts List, pgs Dimensions (Inches) Catalog With ccess Maximum C Number Fitting C D E F Width V 86W-6ST 86WS-6ST W-8ST 86WS-8ST W-0ST 86WS-0ST W-2ST N/ W-4ST 8WS-4ST W-ST 9WS-ST W-ST 92WS-ST W-ST 9WS-ST W-2ST 94WS-2ST W-2ST** N/ W-ST** N/ W-2ST 9WS-2ST W-ST 96WS-ST W-ST** N/ W-4ST** N/ **Reduced Ports METRIC SIZES VILLE 86WV-0MM N/ WV-2MM N/ WV-MM Consult Factory For N/ WV-6MM vailability of N/ WV-8MM ccess Fittings in N/ WV-22MM Metric Sizes N/ WV-28MM N/ or For Other Sizes 92WV-MM N/ WV-42MM Not Shown N/.9.00 Integra-Seal W Series Integra-Seal WS Series

6 Line Valves - Tuffy Series Diaphragm Packless Valves ll diaphragm packless valves contain metal diaphragms and backseat metal to metal when the valve is fully open. Controlled stem travel assures life-time diaphragm performance; balanced bearing surfaces and polished stem heads eliminate wear and assure smooth, easy operation. Flow is unrestricted. ll OD solder connections for valves " and smaller are machined to an outside diameter equivalent to the next largest standard size of tubing. ecause of their unique construction, Superior diaphragm packless valves can be soldered into the line without disassembly. Comfortgrip nylon handwheels are furnished on all types of valves. Types 24, 2, and 26 Underwriters Laboratories and Canadian Standards ssociation listed. Vacuum pplications ll Superior packless valves are excellent for vacuum service. " and smaller are regularly used for vacuums to micron and the larger sizes are adequate for 0 microns. Tuffy Line Valves Catalog IC Size (Inches) Weight Number Number Inlet Outlet (Pounds) Tuffy Standard SE X SE Tuffy Standard ODS X ODS 24-4S S S S 640 Tuffy w/tube Exts. ODS X ODS 24-4ST ST ST ST Tuffy ngle Valves Catalog IC Size (Inches) Weight Number Number Inlet Outlet (Pounds) Tuffy ngle NPT X SE Tuffy ngle-solder ODS X ODS -8S

7 Line Valves - Tuffy Series Diaphragm Packless Valves Working Pressure: " thru ": 00 psig Working Pressure: - ": psig ody Construction: Forged rass Seat Material: Nylon Diaphgram Construction: Stainless Steel Maximum Temperature: 2 F Minimum Temperature: -40 F U.L. and C-UL Listed File No. S462(N) Valves may be installed without disassembly. Wrap body with damp cloth or other suitable heat sinking material during soldering. ll Tuffy Valves are suitable for use with R, R2, R22, R2, R2, R4, R402, R402, R404, R00, R02, R0, and industrial oxygen usage. For gases and liquids not listed, please consult factory. Spare Parts List, pgs Tuffy Line Valves Mounting Flange Dimensions (Inches) Catalog Number C D E F G C V G (Hole Size) F F 24 With Tube Extensions D C E S S S S ST ST ST ST N/ N/ N/ Tuffy ngle Valves Dimensions (Inches) Catalog Number C D E F G C V D N/ S E C

8 Line Valves - Tuffy Series Diaphragm Packless Valves Tuffy X2 Line Valve with Sealzall Moisture Seal Sealzall positive moisture seal prevents condensation from seeping down between the valve stem and bonnet and eliminates valve freeze-up. Made of resilient Teflon, the Sealzall moisture barrier is firmly sealed into the valve bonnet. It will not turn with the opening and closing of the valve, and will remain in position to provide a permanent moisture barrier. Tuffy X2 Line Valve with Sealzall Moisture Seal X2 X2 Catalog IC Size (Inches) Weight Number Number Inlet Outlet (Pounds) 24X X2-4S X2-6S 692 SE X SE ODS X ODS X2 24X2S Tuffy X2 Line Valve with Sealzall Moisture Seal Mounting Flange Dimensions (Inches) Catalog Number C D E F G C V G (Hole Size) F F D E 24X X2-4S X2-6S N/ 0.99 N/ C Enlarged View of Moisture arrier 24X2 6

9 Line Valves - Tuffy Series Diaphragm Packless Valves Tuffy Purge and Drain Valves Catalog IC Size (Inches) Weight Number Number Inlet Outlet (Pounds) Tuffy Purge and Drain ODS X SE Tuffy Charging Valves Catalog IC Size (Inches) Weight Number Number Inlet Outlet (Pounds) Tuffy Charging Valves ODS X ODS 26X-0S

10 Line Valves - Tuffy Series Diaphragm Packless Valves Diaphragm Packless Globe Valves low pressure drop is available in the 2 series forged brass diaphragm packless globe valves. The nylon seated stem assembly is inclined to provide maximum flow and minimum pressure drop. With this compact design, many headroom problems are eliminated. Tuffy Purge and Drain Valves G (Hole Size) Mounting Flange F F D E Dimensions (Inches) Catalog Number C D E F G C V N/ C Tuffy Line Valves Mounting Flange Dimensions (Inches) Catalog C Number C D E F G V ODS X ODS G (Hole Size) F F D E 26X-0S C 8

11 Line Valves - Tuffy Series Diaphragm Packless Valves Diaphragm Packless Globe Valves Catalog IC Size (Inches) Weight Number Number Inlet Outlet (Pounds) FPT X FPT 2-N ODS X ODS 2-4S 642. Diaphgram Packless Globe Valves Mounting Flange Dimensions (Inches) Catalog Number C D E F G C V G (Hole Size) F F D E 2-N 6 2-4S C 9

12 LPD* Globe Valves Globe and ngle Valves The LPD Globe Valves present to the industry a concept in forged brass valves in sizes " through - " which streamlines flow and minimizes pressure drop in an extremely compact design. Inclining the seat to a 0 angle minimizes turbulence and streamlines flow to help obtain the maximum capacity of modern, high performance refrigeration and air-conditioning systems. The C series with special non-metallic bonnet gaskets and Teflon seat inserts permit the use of these valves in service temperatures as high as 400 F. olted bonnets, which are loosely assembled after factory testing, permit easy disassembly for soldering. Metal-to-metal alignment assures a perfect seal when bonnet is bolted. metal-to-metal back seat, when valve is fully open, permits repacking under pressure. full floating swivel type seat holder and a durable Teflon seat insert assure long life and positive shut-off. The LPD ngle Valves are forged brass construction, and parts are interchangeable with comparable sizes of LPD globe line valves. *LPD - Lowest pressure drop consistent with compact size. LPD Globe Valves 290C Series Catalog IC Size (Inches) Weight Number Number Inlet Outlet (Pounds) 290C-4S C-S C-S C-S C-2S C-2S C-S C-S LPD Globe ngle Valves 90C Series Catalog IC Size (Inches) Weight Number Number Inlet Outlet (Pounds) 90C-4S C-S C-S C-S

13 LPD* Globe Valves Globe and ngle Valves Working Pressure: 00 psig ody Construction: Forged rass or rass and Copper Seat Material: Teflon Maximum Temperature: 400 F Minimum Temperature: -40 F Recommended olt Torque for Re-assembly: See Column E Globe Valves re Suitable For Use With R-2, R-22, R-00, R-02, R-4, R- 2, R-2, R404, R402, and R402. For Gases nd Liquids Not Listed, Please Consult Factory. Metal-to-Metal ack Seat When Fully Open Can Repack Under Pressure Spare Parts List, pgs *LPD - Lowest pressure drop consistent with compact size. LPD Globe Valves 290C Series D Dimensions (Inches) Catalog E Number C D (ft. lbs.) CV 290C-4S C-S C-S C-S C-2S C-2S C-S C-S C LPD Globe ngle Valves 90C Series Dimensions (Inches) Catalog E Number C D (ft. lbs.) C V 90C-4S C-S C-S C-S D C

14 H-V Check Valves Horizontal or Vertical Installation H-V Globe Check Valves Globe check valves feature the time proven piston construction simplified for easy reassembly after soldering. The improved C series with special non-metallic bonnet gaskets and Teflon seat inserts permit the use of these valves in service temperatures as high as 400 F. ll H-V globe check valves are of all forged brass construction in the low pressure drop Y type design. Complete back pressure shutoff is achieved at low pressure. The angle style is forged brass or brass and copper construction, and parts are interchangeable with comparable size of line type. Note: olted bonnets are loosely assembled after testing to allow easy disassembly for soldering. Line Check Valves Catalog IC Size (Inches) Weight Number Number ODS X ODS (Pounds) Line Valve Type 80C-4S C-S C-S C-S C-2S C-2S C-S C-S.00 ngle Check Valves Catalog IC Size (Inches) Tube Weight Number Number ODS X ODS Extensions (Pounds) ngle Valve Type 8C-4S 6 No* C-S 66 No* C-S 68 No*. 88C-S 69 No*. *Note: Can be supplied with tube extensions on special order for soldering into the line without disassembly. 2

15 H-V Check Valves Horizontal or Vertical Installation Working Pressure: Up to 00 psig Construction: ll Forged rass Seat Material: Teflon Special Non-Metallic onnet Gasket Service Temperature Up to 400 F Low Pressure Drop Y Design Complete ack-pressure Shut-Off at Low Pressure Differential Time Proven Piston Construction Install in ny Position ut Upside Down Can e Supplied With Tube Extensions, Thus Eliminating Disassembly U.L. and C-UL Recognized 80C Through 809C, File No. S2989(N). Recommended olt Torque for Re-assembly, see Column E ll Superior Check Valves are Suitable for Use With R, R2, R22, R2, R2, R4, R402, R402, R404, R00, R02, and R0 For Gases and Liquids Not Listed, Please Consult Factory. Spare Parts List, pgs, 64-6 /2 lb. Differential Spring For Special Higher Differential Springs For ll Check Valves, Please Consult Factory Suitable for Many pplications Such as Hot Gas Defrost Line Check Valves D Dimensions (Inches) Catalog E Number Size C D (ft. lb.) C V 80C-4S C-S C-S C-S C-2S C-2S C-S C-S C ngle Check Valves D Dimensions (Inches) Catalog E C Number Size C D (ft. lb.) V 8C-4S C-S C-S C-S C

16 H-V Check Valves Horizontal or Vertical Installation Type 802 Check Valves Series (Patent,48,9) This Y type of valve for years has been the most popular design in the refrigeration industry. The internal parts can easily be removed and reassembled after soldering. This basic Y type design reduces pressure drop to a very low level. The Teflon seat insert rapidly conforms to the cone type of seating surface in the body. This insures positive shut-off characteristics. This valve minimizes leakage even at the lowest back pressure. specially designed secondary seat backs up the primary seat, after approximately 0,000 cycles of operation the secondary seat becomes effective. This is done to insure even better shut-off characteristics as the valve wears into service. Upon reassembly of the valve, positive shut-off between the body cap and the body is assured by means of a special gasket seal. ll Superior check valves have Teflon seats. These valves may be installed in any position, except upside down. U. L. and C-UL recognized " through 2 ". Type 802 Check Valve Series Catalog IC Size Weight Number Number (Inches) (Pounds) Flare X Flare ODS X ODS 802-4S S S S S Type 802 Check Valve Series ODS X ODS Tube Extensions* Catalog IC Size Weight Number Number (Inches) (Pounds) 802-4ST ST ST ST ST 4.00 *Tube extensions permit valve to be silver soldered directly to line without disassembly. 4

17 H-V Check Valves Horizontal or Vertical Installation Working Pressure: Up to 00 psig Construction: ll Forged rass Seat Material: Teflon Specially Designed Secondary Seat acks Up Primary Seat Copper Gasket etween ody Cap and ody ssures Positive Shut-off Minimum Temperature: -40 F Maximum Temperature: 400 F Low Pressure Drop Y Design Tube Extensions Permit Valve to be Soldered Without Disassembly ll U.L. and C-UL Recognized, File No. S2989(N). Patent No.,48,9 Recommended onnet Torque: 802/80 ft. lbs ft. lbs. ll Superior Check Valves are Suitable for Use With R, R2, R22, R2, R2, R4, R402, R402, R404, R00, R02, and R0 For Gases and Liquids Not Listed, Please Consult Factory. Spare Parts List, pgs For Special Higher Differential Springs For ll Check Valves, Please Consult Factory Suitable for Many pplications Such as Hot Gas Defrost Type 802 Check Valve Series Dimensions (Inches) Catalog C Number Size C D V Flare X Flare D N/ C ODS X ODS 802-4S S S S S N/ Type 802 Check Valve Series Dimensions (Inches) Catalog C Number Size C D V C D 802-4ST 802-6ST 802-8ST ST ST N/

18 900M Series In-Line Check Valve Copper connection sizes /4 through /8. Hermeticaly sealed spun copper body. 0 mesh screen to protect seat surface from debris. Lapped stainless steel disc and lapped brass seat assembly. Magnetic ctuation. rrow indicates direction of flow. Minimal Pressure Drop. U.L. and C-U.L. Recognized, File No. S2989(N) Specifications Dimensions Maximum Nominal pproximate Length Cup/Depth Diameter Maximum Working urst Leak Rate Catalog IC Size Weight C Strainer Working Pressure Pressure ccm/sec Number Number (in.) (lbs) (in.) (in.) (in.) Mesh Pressure (kpa) (PSIG) 60 psi 900M-4S X 0-900M-6S X 0-900M-8S X 0-900M-0S X 0-900M-2S X M-4S X 0-2 Contact Factory for Information on Larger Sizes. 6

19 Liquid Indicators and Sight Glasses ull s Eye Sight Glass sight glass for oil, liquid or gas. Catalog IC NPT Size Weight Number Number (Inches) (Pounds) 64* E S-G 24 64x** Catalog IC Overall Weight Number Number Connections Length (Pounds) 0-0S 6899 ODS x ODS 4 **With Flow Indicator **With Red Flow Indicator

20 Series W Dual Pressure Relief Valve ssembly The Series W Dual Pressure Relief Valve ssembly is a next generation product incorporating Superior s proven welded ball valve technology to further safeguard your system in the event of a pressure relief valve discharge. This product provides you with the ability to maintain protection of your system with a back up pressure relief valve while enabling you to replace the other relief valve - all without dropping system pressure! The new line of ball valves employs the latest robotic welding technology, and the valves have full size ports for unrestricted flow. Every continuous welded body joint is 00% factory tested to ensure positive leak-free performance. Dual Teflon ball seals surround a polished brass ball at each end. secondary seal becomes effective if foreign material scores the primary seal... even unfavorable conditions such as compressor burnout a Superior exclusive. The Series W Dual Pressure Relief Valve ssembly is constructed using an all forged brass body. High flow internals maximize flow capacity, another Superior exclusive. The stem and cap of the Series W is located on the side of the valve to provide easy access with a wrench. Our time-tested seal cap design permits valve operation without seal cap removal, and stamped flow direction indicators on the seal cap indicate pressurized port at a glance. Mechanical internal machined stops ensure positive open or closed seal position with only a turn. The Series W incorporates a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal a third Superior exclusive. There are no synthetic O rings. US Patent No.,6,9 Series W Size (Inches) Inlet Outlet Catalog IC Connection Connection all Port Weight Number Number (MPT) (FPT) Diameter (Pounds) W-D (4.0 mm). W-E (9.0 mm).2 W-F (2.40 mm) 6.9 Seal Cap Seal Cap Exclusive Seal Cap design permits operation of valve without removal. Markings on cap top designates at-a-glance pressurized port. 8

21 Series W Dual Pressure Relief Valve ssembly High flow internals for maximum flow capacity. Superior exclusive! welded ball valve design allows removal or replacement of either relief valve while system is still pressurized, without loss of charge! Proven seal cap and stem design. No synthetic O-ring seal. Cap design permits valve operation without seal cap removal. The male inlet connection allows for easy installation onto receiver. No need for male adapters! Flow direction indicator on seal cap. Mechanical internal machined stops ensure positive open or closed seal position. Full open or close with only a turn. Dual Teflon ball seals at each end secondary seal becomes effective if foreign material scores the primary seal. nother Superior exclusive! Every valve is 00% factory sealed and leak tested. Full refrigeration service temperature range of -40 F to +2 F (-40 C to +6 C). Design working pressure of 00 psig (4.4 bar). ll forged brass body and polished brass ball. U. L. and C-UL Listed. File No. 462 (N) ll ball valves are suitable for use with R, R2, R22, R2, R2, R42, R402, R402, R404, R00, R02, and R0. For gases or liquids not listed, please consult factory. US Patent No.,6,9 Catalog Dimensions (Inches) CV Port Number C D E Outlet Outlet W-D 4.69 (9.2mm).0 (8.09mm).26 (.9mm) W-E. (4.8mm).90 (99.06mm).49 (.8mm) W-F 6.26 (9.0mm).09 (29.29mm).9 (49.02mm) Series W Use W-D with Superior Relief Valves Catalog No. 020 " MPTx " SE Catalog No. 220 " MPTx " SE ngle Use W-E with Superior Relief Valves Catalog No. 00 " NPTx " FPT Catalog No. 04 " NPTx " FPT Use W-F with Superior Relief Valves Catalog No. 060 " NPTx" FPT Catalog No. 060x " NPTx " FPT Seal Cap Seal Cap Exclusive Seal Cap design permits operation of valve without removal. Markings on cap top designates at-a-glance pressurized port. 9

22 Pressure Relief Valves Series Contact factory for information on internal compressor relief valve, series 00. Superior offers the most complete range of refrigeration relief valves in the industry. ll valves have been designed, constructed and rated in accordance with NSI/SHRE Standard Safety Code for Mechanical Refrigeration and the Canadian Standards ssociation. Each valve is stamped U.V./N.. to indicate National oard certifications as to capacities. Certified National oard ratings are printed on the next page. Minimum setting for all relief valves listed is 0 psi. These series pressure relief valves are all Teflon seated, permitting their use in applications of either high or low tmospheric Type 000 temperatures where many times the conventional rubber seated valves are completely unsatisfactory. Catalog numbers indicate style and size of relief valve only - customer must specify pressure setting when ordering. Standard settings are 2, 00, 0, 400, 42, and 40 psig; settings from 0 up to 40 psig with certified discharge capacities are available at a slight additional cost. Note: Prior to installation or during pressure vessel testing, Superior pressure relief valves should not be discharged. ny dirt in the system may embed in the seat and ngle Type 22 prevent the pressure relief valve from resealing properly. Important: pressure relief valve is installed in a refrigeration system primarily to protect the receiver. Since it is not intended to be an overload or high pressure cutout, we recommend that the pressure relief valve be set at the working pressure marked on the receiver, regardless of the type of refrigerant used. The method for determining set pressure is outlined in NSI/SHRE Standard Safety Code for Mechanical Refrigeration, or write for Technical ulletin -28:90. Catalog Port Size (Inches) Weight (lb.) Number Diameter Inlet Outlet NPT *tmospheric No External Connection X *.2 *.2 *.2 SEL SEL Catalog Port Size (Inches) Weight (lb.) Number Diameter Inlet Outlet NPT X SE Straight-thru Type 02 Female Connection Type 00/060 Catalog Port Size (Inches) Weight (lb.) Number Diameter Inlet Outlet NPT X SE Catalog Port Size (Inches) Weight (lb.) Number Diameter Inlet Outlet NPT X FPT Note: For I..C.. Numbers, Consult Factory 20

23 Pressure Relief Valves Series Contact factory for pressure settings above 00 psi. Minimum Setting: 0 psig ody Construction: rass Seat Material: 00% Teflon Spring Material: Stainless Steel Minimum Temperature: -40 F Maximum Temperature: 2 F Initial Leak: Set Pressure ±% Full Discharge: Initial Leak +0% Reseat: y 80% of Set Pressure SME Certificate No.: 6,69 Canadian Registration No.: 0G04. C.S.. File No.: LR268 N.. Certificate Nos. 000 Series M Series M Series M Series M402 Discharge capacities shown in pounds air per minute. To convert pounds air per minute to standard cubic feet per minute multiply by.. tmospheric Type 000 Pressure Discharge Capacity Setting 000, 00, Catalog Number Dimensions (Inches) ngle Type 22 Discharge Capacity Pressure 22, 24, 26, Setting Dimensions (Inches) Catalog Number Straight-thru Type 02 Discharge Capacity Pressure 02, 04, 06, Setting Female Connection Type 00/060 Discharge Capacity Pressure 00, 060, Setting Catalog Number Dimensions (Inches) * * * * Catalog Number Dimensions (Inches) *Consult Factory for pressure settings above 00 psi. 2

24 Relief Valve Capacity Equations To select a pressure relief valve it is necessary first to determine the discharge capacity required to protect the refrigerant-containing vessel under consideration. The NSI/SHRE Standard states that the required discharge capacity of a pressure relief valve used on such a vessel is directly proportional to the size of the vessel. Once the size of the vessel to be protected is known, the required discharge capacity of the pressure relief valve may then be determined by using the following formula: C=fDL Where C = minimum required discharge capacity of the pressure relief device in pounds of air per minute (kg/sec). f = factor dependent upon type of refrigerant. (See Table below) D = outside diameter of vessel in feet (m). L = length of vessel in ft (m). Table Refrigerant Value of f When used on the lowside of a limited-charge cascade system (Value in parentheses is metric): R-2, R-0, R-44, R-0,.0(0.082) R-08, R-08 R-, R-, R-0 2.0(0.6) R-4 2.(0.20) Other applications: R-8 0.2(0.06) R- 0.(0.04) R-, R-2, R-, R-2, R-42b.0(0.082) R-2a, R-290, R-600, R-600a, R-64 R-2, R-22, R-4, R-24, R-4a,R-40,.6(0.) R-40, R-40C, R-40, R-406, R-40C R-40D, R-40E, R-409, R-409, R-4, R-4, R-4C, R-42, R-44, R-44, R-00, R-20 R-4a, R-402, R-40, 2.0(0.6) R-40, R-408, R-4 R-, R-402, R-40, R-404, R-40, 2.(0.20) R-40, R-40, R-02, R-0, R-09 Flow capacities of Superior pressure relief valves are expressed in either pounds of air per minute or standard cubic feet per minute. To convert pounds of air per minute to standard cubic feet per minute, multiply by.. To determine the pressure relief valve capacities at any pressure setting between 0 and 40 psig, use the following formula: Where C=S(.P+4.) C = Pressure relief valve capacity in pounds of air per minute. P = Pressure setting of relief valve in psig. S = Pressure relief valve flow factor. Value of S flow factor for each pressure relief valve series are given in Table 2. Table 2 below gives the certified flow ratings in lbs air/min for all of the pressure relief valve series at the standard pressure settings. Table 2 CERTIFIED FLOW RTINGS - for standard settings Flow capacity as determined by the National oard of oiler and Pressure Vessel Inspectors in accordance with.s.m.e. Code, Section VIII, Division, and as required by NSI/SHRE Standard : Safety Code For Mechanical Refrigeration. Series Flow Factor S Catalog No Pressure Setting psig These values are taken directly from NSI/SHRE Standard -994, Section 9.. and NSI/SHRE c-2000, addendum to

25 Packed ngle Valves Packed line valves are designed for a multitude of uses in refrigeration systems. When installed properly, these handy, forged brass, packed angle valves provide easy accessibility, and serviceability for the refrigeration system. ll packed angle valves are provided with a brass seal cap. The 60 series special receiver valve can be furnished with or without copper tube extensions. The tube extensions allow the valve to be silver-soldered into the line without fear of harming the packing. Valves supplied with tube extensions are recommended for liquid line use only. The 6 series charging and purging valves are designed to be installed on the branch or run of a solder-type tee. The valve can be readily positioned for easy access. These valves are shipped loosely assembled for easy removal of parts prior to soldering. Reassemble after installation with a standard " square wrench. Specialty packed angle valves are designed specifically for the Refrigeration Rack industry. The 600X-J is designed for use with the transducer, and offers connections to monitor and verify transducer readings and pressures. The 600-6U6 Oil Leveler valve offers a " SE flare swivel for mounting on the oil leveler and a " SE side outlet for oil line connection. The 600-4U4 SORIT or EPR Pilot Isolation valve uses the same type of connections, in " SE, as the 600-6U6. The valve is designed for an inlet connection to the EPR or SORIT valve, and the outlet to connect to the pilot line of the suction header. ll Superior packed angle valves incorporate a special packing that has been developed for use with all refrigerants. Packed ngle Valves Series Socket Catalog IC Size (Inches) for OD Weight Number Number ottom Inlet Side Outlet Tubing (Pounds) C C 00 NPT X SE Packed ngle Receiver Valves - 60 Series Socket Catalog IC Size (Inches) for OD Weight Number Number ottom Inlet Side Outlet Tubing (Pounds) 60-6D C D 606-0D* 9 60-K S S 4 NPT X SE NPT X FPT NPT X ODS *Special Request - Consult Factory for Minimum Lot Side and vailability

26 Packed ngle Valves Working Pressure: 00 psig Maximum Temperature: 00 F Minimum Temperature: -40 F ody Construction: Forged rass Seal Cap Construction: rass with Copper Gasket or Nylon Gasket U.L. and C-UL Listed File No. S462(N) Schrader Core on 600X-J must be removed prior to soldering. ll Packed ngle Valves are suitable for use with R, R2, R22, R2, R2, R4, R402, R402, R404, R00, R02, and R0. For gases and liquids not listed, please consult factory. Spare Parts List, pgs Packed ngle Valves Series Dimensions (Inches) Catalog Number C D C C 2 D C Packed ngle Receiver Valves - 60 Series Dimensions (Inches) Catalog Number C D D 60-6D C D S K S D Special Request - Consult Factory for Minimum Lot Side and vailability. ackseating Design C 24

27 Packed ngle Valves Packed ngle Charging and Purging Valves - 6 Series Catalog IC Size (Inches) Weight Number Number ottom Inlet Side Outlet (Pounds) 6-4S S S S S S S6 62 ODS X SE Transducer Valve Catalog IC Size (Inches) Weight Number Number Inlet Outlet* Outlet (Pounds) NPT/ODS X FPT X SE 600X-J * " FPT Female Side Connection for Transducer Fitting Used to Monitor Pressure " SE Flare Side Connection with Schrader Core for Manual Pressure Check with Gauge to Verify Transducer Readings Oil Leveler/SORIT or EPR Pilot Isolation Valve Catalog IC Size (Inches) Weight Number Number ottom Inlet Side Outlet (Pounds) 600-4U U6 92 fse X mse

28 Packed ngle Valves Packed ngle Charging and Purging Valves - 6 Series Catalog Dimensions (Inches) Number C D 6-4S S S S S S S6 2 C Transducer Valve Dimensions (Inches) Catalog Number C D E 600X-J 2 9 D E C Oil Leveler/SORIT or EPR Pilot Isolation Valve Dimensions (Inches) Catalog Number C D E 600-4U U D E 26 C

29 Straight Tube Heat Exchangers Superheater II Features and Specifications Superheater II straight tube heat exchangers include a range of internal straight fluted suction tubes from one to eight. Superheater II heat exchangers are designed to permit a system engineer to select a specific heat exchanger model to provide a controlled amount of subcooling, and/or superheat, for any given refrigerant. Refer to Superior s Superheater II Selection Guide for selecting the proper model series graph for the appropriate refrigerant. The Selection/Performance curves plot subcooling versus evaporator capacity in TUs per hour. Call or write the factory for our selection guide. F - OD E D C - ID Features: ll Copper Construction High Temperature razed Joints Exclusive Heat Transfer Surface Engineered for Subcooling Control Selected Performance for Specific Refrigerants U.L. Listed ODS Over- Connections all Shell Shell Suction Suction Liquid Suction Nominal Length Length Diameter pproximate Suction Gross Section Surface Liquid Catalog IC Horse- C D E F G Weight Tube O.D. Number rea rea Volume Number Number (in.) (in.) power (in.) (in.) (in.) (in.) (in.) (lbs.) (in.) of Tubes (in. 2 ) (ft 2 ) (in. ) HXSV HXSV HXSV HXSV HXSV HXSV HXSV HXSV HXSV HXSV HXSV

30 Copper Filter-Driers ll Molecular Sieve Filter-Driers for Moisture and cid Removal Catalog IC Dimensions (Inches) Number Number Connection (Inches) SVM 02 OD ( 6 ID) X Cap. Tube FLOW Includes access valve for charging and/or evacuating system. Catalog IC Dimensions (Inches) Number Number Connection (Inches) SVMC 0 OD ( 6 ID) X Cap. Tube SVM2C 0 OD ( 6 ID) X Cap. Tube MO FI SU FLOW Refrigerant 2 Refrigerant 22 Catalog IC Water Capacity in Drops Water Capacity in Drops Recommended Nominal Tons Number Number F 2 F F 2 F R-2 R-22 SVM SVMC SVM2C

31 Filter and Drier Cartridges For 4 Inch OD Steel Shells Filter Cartridge Type FC-48 Interchangeable with ll Major Manufacturers Cores Super Pleated Filter Media Provides More Filter rea of Tubular Filter Cores and 0% More Than Other Manufacturers Pleated Cartridges. Filters Solid Contaminants Down to 0 microns. High Capacity Type HC-48 and Char-Core Type CD-48 Interchangeable with ll Major Manufacturers Cores Solid Cake Design Molded from lend of ctivated lumina and Molecular Sieve Provides Micronic Filtration with Minimum Pressure Drop. Cores for Recycle/Recovery Equipment Type RC-48 for 4 " OD Steel Shell and Type RC for Superior CF rass Shell Molecular Sieve Content Provides Highest Moisture Capacities vailable. Ultra High Filtering Capacity for Removal of Solid Contaminants. Ratings for FC-48, HC-48, and CD-48 Surface Cartridge Capacity Ratings (Drops of Water) Catalog IC rea Length Weight Volume R2 ( ppm) R22 (60 ppm) R4a (60 ppm) Number Number (sq. in.) (Inches) (Pounds) (cu. in.) F 2 F F 2 F F 2 F FC N/ HC CD Ratings for RC-48 and RC Surface Cartridge Capacity Ratings (Drops of Water) Catalog IC rea Length Weight Volume R2 ( ppm) R22 (60 ppm) R4a (60 ppm) Number Number (sq. in.) (Inches) (Pounds) (cu. in.) F 2 F F 2 F F 2 F RC RC* *Charcoal ctivated 29

32 Suction Line Filters Type CF Uni-Form Shell and Replaceable Cartridges ll-brass One-piece Shell May be Silver razed for Permanent Installation and Protection of System Minimal Space Required for Installation No Paint to Peel No Rust or Corrosion Single Cartridge Design ccess Valve ( -inch SE) Readily Permits Pressure Drop Readings Corrosion Resistant Stainless Steel olts Permit Easy ccess for Changing of Cartridges No Welds or Solder Joints, No Chance of Leaks! You ll Never Have to Cut it out gain... Permanent Lifetime Value at Today s Cost! U.L. and C-UL Listed. File No. S 28 (N) Shells Only - Cartridges Not Included F D C -Laying Length Conn. Nominal Catalog IC ODS Includes Shell Dia. F C D Weight Number Number (in.) Cartridge E (in.) (in.) (in.) (in.) (in.) (in.) (lb.) 2CF-0S 66 NO 2 2CF-2S 668 NO 2 2CF-4S 669 NO CF-8S 60 NO CF-8S* 646 NO CF-0S* 640 NO CF-4S 64 NO CF-8S 642 NO CF-22S 64 NO CF-26S 644 NO CF-4S 64 2 NO CF-4S* 68 NO CF-8S* 682 NO CF-22S 68 NO CF-26S 684 NO CF-4S 68 2 NO CF-42S NO CF-4S NO CF-42S NO CF-0S 6896 NO *Liquid Line Service Only Replaceable Cartridges - Type F Filter For Cartridge Weight per Catalog IC Shell Cartridge Length Filter rea Standard Package Number Number Number OD (in.) (in. 2 ) Package (lb) Replacement Flange Gaskets Catalog IC For Shell Number Number Number G2 00 2CF G 004 CF G4 00 4CF G 006 CF 0 F2 0 2CF F 02 CF F4 0 4CF F 04 CF Replaceable Cartridges - Type DF for Clean-up and Permanent Use For Cartridge Weight per Catalog IC Shell Cartridge Length Filter rea Standard Package Number Number Number OD (in.) (in. 2 ) Package (lb) DF2 0 2CF DF 09 CF DF CF 89 2 DF 06 CF

33 Suction Line Filters Type CF Uni-Form Shell and Replaceable Cartridges Rated in ccordance with RI Standard 0-86 Filter or Filter Plus Drier Should be Changed when Pressure Drop cross Cartridge Increases Significantly Follow Compressor Manufacturer s Recommendations, or Request Superior s Clean-Up ulletin Type F Filter Cartridge Type DF Filter-Drier Cartridge Selection and Ratings of Suction Line Shells and Cartridges for R2, R22, R02 Maximum Tonnage Ratings Permanent Temporary Evaporation Temperatures Filter Clean-Up -40 F -20 F 0 F 20 F 40 F Cartridge Cartridge Pressure Drop (psi) and and Conn. Surface Surface Catalog ODS rea rea Refrigerant Number Number (Inches) R22 R02 R2 R22 R02 R2 R22 R02 R2 R22 R02 R2 R22 R02 2CF-0S CF-2S 0.0 F2 DF CF-4S sq. in. 66 sq. in CF-8S CF-4S CF-8S F DF CF-22S sq. in. sq. in. CF-26S CF-4S CF-22S CF-26S.62 F4 DF CF-4S sq. in. 89 sq. in CF-42S CF-4S F DF CF-42S sq. in. 20 sq. in. CF-0S

34 Suction Line Filters Type CF Uni-Form Shell and Replaceable Cartridges New Refrigerants R4 and R404 Selection and Ratings of Suction Line Shells and Cartridges Maximum Tonnage Ratings Permanent Temporary Evaporation Temperatures Filter Clean-up -40 F -20 F 0 F 20 F 40 F Cartridge Cartridge Pressure Drop (psi) Conn. and and Catalog ODS Surface Surface Refrigerant Number Number (Inches) rea rea R404 R4 R404 R4 R404 R4 R404 R4 R404 2CF-0S CF-2S 0.0 F2 DF CF-4S sq. in. 66 sq. in CF-8S CF-4S CF-8S F DF CF-22S sq. in. sq. in. CF-26S CF-4S CF-22S CF-26S.62 F4 DF CF-4S sq. in. 89 sq. in CF-42S CF-4S 2.2 F DF CF-42S sq. in. 20 sq. in CF-0S Selection and Ratings of Permanent Suction Line Filter-Driers-Shell and Cartridge Type for R2, R22, R02 Maximum Tonnage Ratings Evaporation Temperatures -40 F -20 F 0 F 20 F 40 F Pressure Drop (psi) Permanent Filter Conn. Plus Drier Catalog ODS Cartridge and Refrigerant Number Number (Inches) Surface rea R22 R02 R2 R22 R02 R2 R22 R02 R2 R22 R02 R2 R22 R02 2CF-0S CF-2S 0.0 DF CF-4S sq. in CF-8S CF-4S CF-8S DF CF-22S sq. in. CF-26S CF-4S CF-22S CF-26S.62 DF CF-4S sq. in CF-42S CF-4S DF CF-42S sq. in. CF-0S

35 Suction Line Filters Type CF Uni-Form Shell and Replaceable Cartridges New Refrigerants R4 and R404 Selection and Ratings of Suction Line Shells and Cartridges Maximum Tonnage Ratings Evaporation Temperatures -40 F -20 F 0 F 20 F 40 F Permanent Filter Pressure Drop (psi) Conn. Plus Drier Catalog ODS Cartridge and Refrigerant Number Number (Inches) Surface rea R404 R4 R404 R4 R404 R4 R404 R4 R404 2CF-0S CF-2S 0.0 DF CF-4S sq. in CF-8S CF-4S CF-8S DF CF-22S sq. in. CF-26S CF-4S CF-22S CF-26S.62 DF CF-4S sq. in CF-42S CF-4S DF CF-42S sq. in. CF-0S

36 Suction Line Filters Type CF Uni-Form Shell and Replaceable Cartridges New Refrigerant R0 Selection and Ratings of Suction Line Shells and Cartridges Maximum Tonnage Ratings Permanent Temporary Evaporation Temperatures Filter Clean-Up -40 F -20 F 0 F 20 F 40 F Cartridge Cartridge Pressure Drop (psi) Conn. and and Catalog ODS Surface Surface Refrigerant Number Number (Inches) rea rea R0 R0 R0 R0 R0 2CF-0S CF-2S 0.0 F2 DF CF-4S sq. in. 66 sq. in CF-8S CF-4S CF-8S.2 F DF CF-22S. sq. in. sq. in CF-26S CF-4S CF-22S CF-26S.62 F4 DF CF-4S sq. in. 89 sq. in CF-42S CF-4S F DF CF-42S sq. in. 20 sq. in. CF-0S New Refrigerant R0 Selection and Ratings of Suction Line Filter-Driers-Shell and Cartridge Type Maximum Tonnage Ratings Evaporation Temperatures -40 F -20 F 0 F 20 F 40 F Pressure Drop (psi) Conn. Permanent Filter plus Drier Catalog ODS Cartridge and Surface rea Refrigerant Number Number (Inches) Surface rea R0 R0 R0 R0 R0 2CF-0S CF-2S 0.0 DF CF-4S sq. in CF-8S CF-4S CF-8S.2 DF CF-22S. sq. in CF-26S CF-4S CF-22S CF-26S.62 DF CF-4S sq. in CF-42S CF-4S DF CF-42S sq. in. CF-0S

37 Suction Line Cores for CF Shells 2,, 4, and Temporary cid Removal Suction Line Cores For Temporary Installation in Place of F or DF Cartridges The cid Fighter is a temporary suction line core specifically designed to give you maximum acid removal performance in situations where extremely high acid conditions exist. When used in conjunction with a Superior DF filter drier cartridge, it gives you a knockout combination. Note: The DF cartridge is still satisfactory for routine acid removal and system clean-up. Features and enefits of cid Fighter Core Fewer system pump downs required to remove persistent acid condition. Fewer cores needed for system clean-up. The ability to remove other foreign materials: sludges, solids, oil residues, moisture, and other contaminants normally found in air-conditioning and refrigeration systems. More acid removal capability than other comparable suction line cores. This results from using a very special blend of fieldproven desiccants. Ratings for Temporary cid Removal Suction Line Cores - R2, R22, and R02* ( Temporary refers to use during clean-up procedure while P is being monitored.) Hot packaging insures fully activated cores for field installation. Each core is individually packaged, as it comes from a vacuum oven, in a special heat-sealed foil bag to maintain the lowest residual moisture obtainable. Systems pressure drop is minimized because of large, open mesh, single core bonded construction, and large surface area. Maximum core permeability is due to uniformity of desiccant size and shape. dded compressor protection, because of a built-in double-mesh stainless steel screen on the outlet side of the core. Integral felt gaskets at each end of the core cushions core against shock and eliminates need for extra gaskets in the package. High mechanical crush strength of the core precludes powdering. Temporary Maximum Tonnage Ratings High Capacity Evaporation Temperatures cid Removal -40 F -20 F 0 F 20 F 40 F Core, Surface Pressure Drop (psi) Connection rea and Catalog ODS Dessicant Refrigerant Number Number (Inches) Volume R22 R02 R2 R22 R02 R2 R22 R02 R2 R22 R02 R2 R22 R02 2 IC 008 2CF-0S CF-2S 0.0 sq. in CF-4S 0.8 cu. in CF-8S IC 009 CF-8S CF-0S CF-4S sq. in CF-8S.2 cu. in CF-22S CF-26S CF-4S IC 00 4CF-4S CF-8S CF-22S. 9 sq. in CF-26S.62 6 cu. in CF-4S CF-42S IC 0 CF-4S sq. in CF-42S cu. in CF-0S *When actual pressure drop exceeds above recommended P, replace core with DF core within minutes.

38 Suction Line Cores for CF Shells 2,, 4, and Temporary cid Removal Suction Line Cores For Temporary Installation in Place of F or DF Cartridges New Refrigerants R4 and R404 Ratings for Temporary cid Removal Suction Line Cores.* Temporary Maximum Tonnage Ratings High Capacity Evaporation Temperatures cid Removal -40 F -20 F 0 F 20 F 40 F Core, Surface Pressure Drop (psi) Connection rea and Catalog ODS Dessicant Refrigerant Number Number (Inches) Volume R404 R4 R404 R4 R404 R4 R404 R4 R CF-0S CF-2S 0.0 sq. in CF-4S 0.8 cu. in CF-8S CF-8S CF-0S CF-4S sq. in CF-8S.2 cu. in CF-22S CF-26S CF-4S CF-4S CF-8S CF-22S. 9 sq. in CF-26S.62 6 cu. in CF-4S CF-42S CF-4S sq. in CF-42S cu. in CF-0S *When actual pressure drop exceeds above recommended P, replace core with DF core within minutes. 6

39 Ratings For New Refrigerant R0 Temporary cid Removal Suction Line Cores* Temporary Maximum Tonnage Ratings High Capacity Evaporation Temperatures cid Removal -40 F -20 F 0 F 20 F 40 F Core, Surface Pressure Drop (psi) Connection rea and Catalog ODS Dessicant Refrigerant Number Number (Inches) Volume R0 R0 R0 R0 R0 2 2CF-0S CF-2S 0.0 sq. in CF-4S 0.8 cu. in CF-8S CF-8S CF-0S CF-4S sq. in CF-8S.2 cu. in CF-22S CF-26S CF-4S CF-4S CF-8S CF-22S. 9 sq. in CF-26S.62 6 cu. in CF-4S CF-42S CF-4S sq. in CF-42S cu. in *When actual pressure drop exceeds above recommended P, replace core with DF core within minutes.

40 Liquid Line Cores for CF Shells CD, CD4, and CD Char-Core Liquid Line Cores Features and enefits of Char-Core Liquid Line Cores Wax build-up is prevented due to a high percentage of activated charcoal desiccant providing optimum wax adsorption. This special formulated blend gives Char-Core liquid line cores the ability to remove not only wax, but virtually all other contaminants found in air conditioning and refrigeration systems. Maximum core permeability due to uniformity of desiccant size and shape. System pressure drop is minimized (along with the possibility of flash gas), because of the large, open mesh, single core bonded construction, and large surface area. Hot packaging prepares cores for field installation. Each core is individually packaged, as it comes from a vacuum oven, in a special heat-sealed foil bag to maintain total dryness. High mechanical crush strength of the new Char-Core exceeds industry minimum standards and precludes powdering. dded compressor protection with a built-in double mesh stainless screen on the outlet side of the core. Integral felt gaskets at each end of the Char-Core cushions against shock and eliminates need for extra gaskets in the package. Ratings for CD Liquid Line Char-Core R2 R22 R02 Tonnage Recommendations Tons Tons Tons Comm. and ir Catalog ODS Flow Water Capacity Flow Water Capacity Flow Water Capacity Low Temperature Conditioning Number (Inches) # P F 2 F # P F 2 F # P F 2 F R2 R22 R02 R2 R22 R02 CF-8S CF-0S CF-4S CF-8S CF-22S CD IC 04 High Capacity, Replaceable for the Removal of Wax, Moisture and cids from Refrigeration and ir Conditioning Systems 6 sq. ins. of Filter Surface cu. ins. of Desiccant Water Capacities in Drops ased on Equilibrium Point Dryness of: ppm for R2, 60 ppm for R22, and 0 ppm for R02 8

41 Liquid Line Cores for CF Shells CD, CD4, and CD Char-Core Liquid Line Cores Ratings for CD4 Liquid Line Char-Core R2 R22 R02 Tonnage Recommendations Tons Tons Tons Comm. and ir Catalog ODS Flow Water Capacity Flow Water Capacity Flow Water Capacity Low Temperature Conditioning Number (Inches) # P F 2 F # P F 2 F # P F 2 F R2 R22 R02 R2 R22 R02 4CF-4S CF-8S CF-22S CF-26S CF-4S CD4 IC 044 High Capacity, Replaceable for the Removal of Wax, Moisture and cids from Refrigeration and ir Conditioning Systems 9 sq. ins. of Filter Surface 6 cu. ins. of Desiccant Water Capacities in Drops ased on Equilibrium Point Dryness of: ppm for R2, 60 ppm for R22, and 0 ppm for R02 Ratings for CD Liquid Line Char-Core R2 R22 R02 Tonnage Recommendations Tons Tons Tons Comm. and ir Catalog ODS Flow Water Capacity Flow Water Capacity Flow Water Capacity Low Temperature Conditioning Number (Inches) # P F 2 F # P F 2 F # P F 2 F R2 R22 R02 R2 R22 R02 CF-8S* CF-22S* CF-26S* CF-4S CF-42S *Not vailable Yet CD IC 04 High Capacity, Replaceable for the Removal of Wax, Moisture and cids from Refrigeration and ir Conditioning Systems 2 sq. ins. of Filter Surface 9 cu. ins. of Desiccant Water Capacities in Drops ased on Equilibrium Point Dryness of: ppm for R2, 60 ppm for R22, and 0 ppm for R02 9

42 Service Tools Sand Cloth brasive Cleaning Pads Catalog IC Number Number Description SCOM Open Mesh Cloth, 80 Grit, Fully Waterproof, Wide X Yards SCWR Sand Cloth, 20 Grit, Water Resistant, Wide X 0 Yards SCWR Sand Cloth, 20 Grit, Water Resistant, Wide X 2 Yards CP Cleaning Pad, 4 X 6, 0 per container Water ubbler Steady Stream Non-Spurt Water ubbler This streamlined bubbler unit, fabricated from a stainless steel forging and heavily chromium plated, will enhance the appearance of any water cooler top or dispensing basin. It will deliver an almost unvarying outlet stream thru upstream pressure changes of to 0 pounds WITHOUT DJUSTMENT. Its unique construction embodies a manual push-button on-and-off valve, a regulator and physical form and dimensions to meet all sanitary codes in ONE UNIT. Weight lb. Catalog IC Number Number Description -800S 809 Water ubbler -0S 806 Replacement Sealed Cartridge -42 Mounting Escutcheon -0 2 Gasket SN Wrench 40