THE WORLD LEADER. atlracing.com. DS628 11x13. Copyright 2014 Aero Tec Laboratories Inc.

Transcription

1 THE WORLD LEADER Copyright 2014 Aero Tec Laboratories Inc. DS628 11x13

2 TABLE OF CONTENTS EXPLORE ATL S FULL LINE OF PERFORMANCE SAFETY PRODUCTS 3 ABOUT ATL FUEL CELLS Learn More About The World Leader in Safety Fuel System Technology 6 4 ATL FUEL CELL SERIES Decide Which ATL Fuel Bladder Best Suits Your Application FLUOROCELL NASCAR & SFI APPROVED The World s FIRST ALL-FUEL Kevlar Reinforced Bladder Extreme-Duty Kevlar Reinforced Bladder for the Top 3 NASCAR Series 9 SUPER CELL 300& FIA FT3.5 CERTIFIED Heavy-Duty Bladders for NASCAR East/West, Canadian Tire, Whelen Mod & ARCA Racing Series BANTAM 11 SUPER CELL 100 FIA FT3 CERTIFIED The Most Popular Soft Rubber Fuel Bladder. Perfect for Most All Forms of Motorsports! DIRT LATE MODEL 14 FIA FT3 CERTIFIED Lightweight Soft Rubber & Molded Hard Rubber Bladders For ALL Dirt Late Model Chassis! CUSTOM & VINTAGE SUPER CELL 400 Ballistic-Nylon Alcohol Resistant Bladders and Molded Tail Tanks for Sprints, Midgets, Super Mods & Hydroplanes ATL s Thinnest and Most Lightweight Fuel Bladder. Max Fuel, Minimum Weight! FIA FT3 CERTIFIED Molded Hard Rubber Bladder Resistant to All Fuels - The Most Versatile Bladder for Any Form of Motorsports! 15 8 FIA FT3 CERTIFIED SPORTS CELL WHAT S NEW? Discover the Latest Fuel Cell Innovations and Racing Accessories from ATL SUPER CELL 500 FIA FT3.5 CERTIFIED 5 SAVER CELL FIA FT3 CERTIFIED The Do-It-Yourself Fuel Cell Molded Hard Rubber Bladder. You Build the Container! 16 FORMULA/SPORTS RACER 17 WORLD RALLY & OFFROAD FIA FT3+ CERTIFIED FIA FT3+ CERTIFIED FIA FT3+ CERTIFIED ATL Can Build You the Ultimate Custom Fuel System. Simply Send ATL a Model or Sketch to Get Started! Wedge and Pod Shaped Bladders for SCCA Spec Racers, Formula Mazda, Van Dieman etc. WRX and EVO Fuel Bladders for World Rally and Large Capacity Fuel Cells for Offroad Endurance Racing 18 SPECIALTY CELLS REPLACEMENT BLADDERS 22 Replacement Bladders for Standard ATL Fuel Cells Including Fluoro, Super, Sports and Saver Cells ALWAYS IN STOCK! TABLE OF CONTENTS 25 FOAM KITS & CANS 23 IMPORTANT INFO. FILL PLATES Complete Standard and Quick-Fill Plate Assemblies, Drilled Plates and Blank Aluminum Plates. PARTS & ACCESSORIES Level Sending Kits, Fuel Gauges & Warning Lights, Fuel Hose & Fuel System Accessories Quick-Fill Valves, Remote Fill Caps and Vent Check Valves. FUEL DELIVERY ATL s In-Tank Black-Box Kits, High/Low Pressure Fuel Pumps and Related Hardware Replacement Foam Kits Plus Steel and Aluminum Containers for All Standard ATL Fuel Cells 24 NECKS, CAPS & VALVES 26 REFUELING EQUIPMENT Dry Breaks, Dump Cans and Vent Valves BROWSE ONLINE The Complete ATL Catalog is Also Available ATL Safety and Performance Reminders 2 20 Drop-In Surge Tanks, Fuel Pick-Ups and ATL Swirl Pots. Chassis-Specific Fuel Cells for Porsche, Ferrari, Ford Mustang, BMW and many more 27 FUEL SCAVENGING

3 ABOUT ATL FUEL CELLS LEARN MORE ABOUT THE WORLD LEADER WHAT INDUSTRY PROFESSIONALS ARE SAYING ABOUT... Driver safety is one of our priorities and we won t cut any corners at Venturini Motorsports. That s why we use ATL fuel cells in our cars. They are also easy to maintain and hold the truest amount of fuel allowed. - Bill Venturini Sr. CEO, Venturini Motorsports When we looked for our fuel cell supplier, it was an easy answer. ATL has been the exclusive supplier for SpeedSource on all our programs since 2005, their ability to build anything we can design has allowed the engineers design freedom without sacrificing safety or reliability. Aero Tec Laboratories Inc and its ATL Fuel Cell Division, have been leading the way with the creation and innovation of crash-resistant, flexible composite safety fuel bladders since their inception in From its beginning in a small NJ garage, to its now commanding multiple facilities that span 2 continents worldwide, ATL has grown into a household name within the motorsports and defense industries. In fact, ATL is the sole supplier to every Formula One race team, the premier racing series on the planet. ATL continues to refine their products which not only keep racers safe, but also provide an integral competitive advantage in weight, refueling speed and surge control. Aside from its exceptional quality and expert craftsmanship, ATL s dedication to research and development has set them light-years ahead of the competition. Never satisfied with simply being the best, ATL strives to further develop fuel bladder materials that are thinner, lighter and stronger. In addition, ATL is constantly evolving to meet the challenges of today s ever changing eco fuel formulations. ATL invites you to browse through their latest racing catalog which showcases their standard lines of crashworthy FIA approved fuel cells, fuel system accessories and refueling equipment. If you have a unique application or require an intricate, chassis-specific fuel bladder, ATL encourages you to inquire about their custom capabilities. Aero Tec Laboratories custom builds thousands of bladders every year that are constructed to match exact customer specifications. ATL is ready to put to use its 45 years of experience and has a team of engineers and technicians eagerly waiting to tackle even the most challenging of fuel system designs! - Sylvain Tremblay Owner, SpeedSource Hoerr Racing Products (HRP) is a proud partner of ATL. ATL s superior product range, product customization ability and quick turnarounds set the bar in the racing industry. Their staff is customer centric, technically sound and most importantly understands racing. - Jason Mitchell President, Hoerr Racing Products ATL has set the fuel cell standards in the racing industry. The quality of the product and their customer service keep us coming back. - Robbie Clements Piper Motorsport DOPAZO RACING a la hora de ofrecer un Tanque de conbustible confiable y con las prestaciones que nuestros clientes exigen sin dudas elegimos ATL. ya sea para autos de turismo, formula o rally hace 20 anos cubrimos con las necesidades de nuestros clientes. gracias por el exelente trato de ATL para con nuestra humilde empresa familiar Dopazo Racing. - Pablo Dopazo Owner, Dopazo Racing I/O Port Racing Supplies has been an ATL dealer for almost 10 years. We have found that they not only have a great product, but they often have the fuel cell we need in stock, on the shelf. This means our customers receive their order earlier. On custom orders ATL s sales people have advanced product knowledge and can steer a customer to a better design with the correct components. They do a great job complementing our customer service. - Ken Myers President, I/O Port Racing Supplies ATL has always been there for our fuel cell needs. When I need a fuel cell, there is no question who I call. ATL quality and service is top notch. From custom fuel cells to standard production, ATL Fuel Cells personify quality. The personal touch that the ATL employees give us is what keeps us coming back. - Andrew Funk G.M., KTR European Motorsports ABOUT ATL FUEL CELLS 3

4 THE HEART OF A FUEL CELL LEARN MORE ABOUT ATL S FUEL BLADDER MATERIALS SUPER CELL 600 FT 3.5 SUPER CELL 500 SUPER CELL 400 FT 5 PLEASE READ Important Details Regarding New FIA Hologram and Labeling Procedures, Please See Page 27 For Info! SUPER CELL 300 FT 3.5 FIA FT3 EQUIVALENT BLADDER MATERIAL: BLADDER MATERIAL: Kevlar Reinforced Fluoropolymer Kevlar Reinforced Rubber Extreme-Duty Ballistic Aramid Ultra Lightweight & Thin BLADDER FUEL RESISTANCE: ALL FUELS - Gas, Ethanol Blends (E10, E50, E85, E100), Methanol, Diesel... See pg. 6 SAFETY RATING: FIA FT3.5 FLEXIBILITY/COLLAPSIBILITY: Very Good; Installation & Impact DURABILITY: Excellent BLADDER FUEL RESISTANCE: High Aromatic Hydrocarbons (Max 15% Blended Ethanol) SAFETY RATING: FIA FT5, SFI 32.1 FLEXIBILITY/COLLAPSIBILITY: Good; Installation & Impact DURABILITY: Outstanding POPULAR USES: Exotic Road Cars, Road Racing & Circle Track - Ultra-Low Diffusion POPULAR USES: NASCAR Sprint Cup, Nationwide & Camping World F1 Grand Prix, IMSA PRICE INDEX: $$$ PRICE INDEX: $$$$ SUPER CELL 200 FT 3.5 BANTAM FT 3 BLADDER MATERIAL: Lightweight, Heavy-Duty Ballistic Reinforced Rubber BLADDER MATERIAL: Ultra-Thin Lightweight Kevlar BLADDER FUEL RESISTANCE: Methanol & Ethanol BLADDER FUEL RESISTANCE: Aromatic Hydrocarbons (Max 15% Blended Ethanol) SAFETY RATING: FIA FT3 Equivalent SAFETY RATING: NASCAR 2000 & FIA FT3.5 FLEXIBILITY/COLLAPSIBILITY: Excellent; Installation & Impact FLEXIBILITY/COLLAPSIBILITY: Excellent; Installation & Impact DURABILITY: Excellent DURABILITY: Very Good POPULAR USES: Dirt & Asphalt Sprint Cars, Midgets, Super Modifieds, Dirt Modifieds & Hydroplanes POPULAR USES: NASCAR East/West & Canadian Tire Series, ARCA PRICE INDEX: $$ SUPER CELL 100 FT 3 PRICE INDEX: $$ SPORTS/SAVER CELL FT 3 FUEL BLADDER INFORMATION BLADDER MATERIAL: Heavy-Duty Ballistic Fiber BLADDER MATERIAL: Super-Light, Ultra-Thin BLADDER MATERIAL: 3 Layer Ballistic Fiber Soft Rubber BLADDER MATERIAL: Molded Seamless Hard Rubber BLADDER FUEL RESISTANCE: Leaded & Unleaded Gas, E10 & High Aromatics (Max 15% Blended Ethanol) BLADDER FUEL RESISTANCE: Leaded & Unleaded Gas, E10 & High Aromatics (Max 15% Blended Ethanol) BLADDER FUEL RESISTANCE: Leaded & Unleaded Gas, E10 & High Aromatics (Max 15% Blended Ethanol) BLADDER FUEL RESISTANCE: Hydrocarbons, Methanol & Ethanol SAFETY RATING: NASCAR 2000 & FIA FT3.5 SAFETY RATING: FIA FT3 SAFETY RATING: FIA FT3 FLEXIBILITY/COLLAPSIBILITY: Very Good; Installation & Impact FLEXIBILITY/COLLAPSIBILITY: Great; Installation & Impact DURABILITY: Very Good DURABILITY: Very Good FLEXIBILITY/COLLAPSIBILITY: Excellent; Installation & Impact DURABILITY: Excellent POPULAR USES: NASCAR East/West & Canadian Tire Series, Whelen Mods, ARCA POPULAR USES: All Forms of Motorsports PRICE INDEX: $$ 4 PRICE INDEX: $$ POPULAR USES: All Forms of Motorsports PRICE INDEX: $ SAFETY RATING: FIA FT3 FLEXIBILITY/COLLAPSIBILITY: Very Good; Impact DURABILITY: Outstanding POPULAR USES: All Forms of Motorsports PRICE INDEX:

5 NEW PRODUCTS THE LATEST INNOVATIONS FROM ATL DIRT LATE MODEL UMP/IMCA MODIFIEDS, TOO! SP128-LM UNIVERSAL 28 GALLON FUEL CELL FOR ALL DIRT CHASSIS AVAILABLE IN BOTH SOFT-RUBBER SUPER CELL & HARD-RUBBER SPORTS CELL CONFIGURATIONS! AS PROVEN BY TIM MCCREADIE Winner of the $50,000 USA Nationals COMING SOON GALLON WEDGE! Call For Details SEE PAGE 13 FOR ATL S COMPLETE LINE OF DIRT LATE MODEL CELLS SPRINT CAR & MIDGET ALUMINUM FILL PLATE Lightweight Black Anodized 4 x 6 Plate With (2) #6 & (1) #8 Fittings and Threaded Cap with Vent Valve HIGH-PRESSURE 2 PUMP SURGE TANK CFD Competition Fuel Delivery System for Electronic Fuel Injection Engines (EFI) Featuring Dual 100psi High Pressure Fuel Pumps! Use for Twice the Flow or (1) Active & (1) Spare psi (each) TF752 Designed by Factory Kahne, Raced by Kasey Kahne Racing s #4, #9 and #49 Sprint Car Teams! CFD-650 Designed for Road Race, Rally and Off-Road Applications Where Both Left and Right Turns are Performed. SEE PAGE 8 FOR SPRINT CELLS SEE PAGE 20 FOR CFD SYSTEMS ROTO-MOLDED POLYMER EXTERNAL SWIRL POT ST540 FIA FT3 CERTIFIED 1.5 Liter Capacity Up To (4) Inlets (1) Outlet (1) Return Mounting Clamps Included Optional Aluminum Mounting Base Plate Designed to Work with External Fuel Pumps, This Swirl Pot Helps Eliminate Fuel Starvation and is Perfect for Road Racing, Off-Road, Rock Crawling, Rally and Drift. TYPICAL CIRCUIT DIAGRAM FOR NEW ATL SWIRL POT NEW PRODUCTS SEE PAGE 19 FOR FUEL SCAVENGING 5

6 FLUOROCELL 600 SERIES LOW-DIFFUSION, ALL-FUEL COMPOSITE BLADDER ALL-FUEL TECHNOLOGY! THE WORLD S FIRST ALL-FUEL COMPATIBLE LIGHTWEIGHT RUBBERIZED BLADDER! FIA FT3.5 CERTIFIED Near Zero Permeation Perfect for Road Vehicles, Too! ATL FluoroCell 600 Series Bladders Can Safely Accept: Leaded & Unleaded Race Fuel Ethanol Blends: E10, E15, E50, E85, E100 Methanol (Methyl Alcohol) Diesel, Bio-Diesel and Bio-Butanol Jet A, Jet B, JP8, JP10, HRJ, 100LL HAN, Hydrazine, Nitrogen-Tetroxide YEAR LIMITED WARRANTY FB622E Bladder FIA FT3.5 Light-Weight.063 Aluminum Container Complete SU622E Shown SPECIAL NOTE REGARDING FOAM *Certain Fuels Require More Frequent Replacement of Safety Foam. Please Call an ATL Sales Engineer to Determine Compatibility. ALL-FUEL Light-Weight Bladder Kevlar Reinforced Rubber Light/Thin/Pliable/Durable Composite Nut-Ring Flange (1) #6 or #8 Pick-Up Assembly (See Chart Below) *Contains SF103 Safety Foam Baffling for Slosh & Explosion Suppression TF600 Light-Weight Aluminum Fill Plate (1) E-Z Grip Billet Aluminum Cap & Neck w/ Flap Valve (1) #6 Vent-Check Roll-Over Valve (1) #6 Dipstick (1) #6 or #8 Outlet Fitting (See Chart Below) FLUOROCELL 600 SERIES COMPLETE ATL FLUOROCELLS Complete Capacity Container Dimensions Cell Part # Gal. Liters L W H Nom. Wt. Lbs. Outlet Size SU #6 Top Load SU #6 Top Load SU #6 Top Load SU #8 Top Load SU615B #8 Top Load SU617* #8 Vertical Edge SU622A #8 Top Load SU622B #8 Top Load SU622C #8 Vertical Edge SU622E #8 Vertical Edge SU622F* #8 Vertical Edge SU622H* #8 Vertical Edge SU624A #8 Top Load SU624B #8 Shoe Box SU624M** #8 Shoe Box SU626A #8 Top Load SU626B #8 Top Load SU626C #8 Top Load SU #8 Top Load SU632A #8 Top Load SU632B #8 Top Load SU632C #8 Top Load SU #8 Top Load * Indicates Fill Plate Offset ** Fill Plate Offset, Designed for use in Troyer Dirt Modified NOTE: SEE PAGE 21 FOR REPLACEMENT 600 SERIES BLADDERS Container Style (See Pg. 22) Custom Sizes AVAILABLE! FLUOROCELL 600 SERIES OPTIONS TF703 Off-Set Remote-Fill Paddle Valve Add -OS to Cell Part # TF193A-184A Quick-Fill Flapper Valve Add -FV to Cell Part # Fuel Level Kit Add -LS to Cell Part # See Pg. 25 TF525 Quick-Fill Paddle Valve Add -PV to Cell Part # Built-In Surge Tank Add -BI2 (2 Door) to P/N (Circle Track Applications) Add -BI3 (3 Door) to P/N (Road Race Applications) See Pg. 19 SF110 Alcohol Foam Add -MF to Cell Part # See Pg. 22 6

7 SUPER CELL 500 SERIES NASCAR SPRINT CUP, NATIONWIDE & TRUCK SERIES FOR USE IN NASCAR SFI 32.1 NASCAR SPRINT CUP ELECTRONIC FUEL INJECTION (EFI) FUEL BLADDERS CUSTOM TAILORED TO YOUR EFI NEEDS WITH BUILT-IN COLLECTORS & PUMP HOLDERS/STUDS Lightweight, High Venting Billet Aluminum Nut Ring Large Pore Foam Baffling Designed for Quick Refueling SFI 32.1 Pump Holders or Studs Located Inside Built-In 2 Door Surge Tank in Right Rear Corner of Bladder - YOU Decide Location. Optional Fuel Ramp Also Avail. YEAR LIMITED WARRANTY LIGHT, THIN AND PLIABLE MAXIMIZE YOUR FUEL LOAD Extreme-Duty Ballistic Kevlar Bladder With Over 2,000 lb./in. of Tensile Strength! Features Internal Seams & Square Corners for MAXIMUM Fuel Capacity. Compatible with Hydrocarbon Race Fuels with MAXIMUM 15% Blended Ethanol Content. 18 Gauge, Master-Crafted Steel Containers Also Available See Page 22 FOR CARBURETED APPLICATIONS - NASCAR NATIONWIDE & CAMPING WORLD SERIES TF707 #10 Outlet w/ O-Ring Seal Billet Aluminum Fill Plate With 2.5, EZ-Adjust 360 Swivel Fill Neck. Complete Capacity Container Dimensions Cell Part # Gal. Liters L W H FORMULA 1 BLADDERS 1.5 Bullet Vent Valve Built-In, Rear Surge Tank SFI 32.2 Container Style (See Pg. 22) Spring-Loaded Aluminum Paddle Valve SU None NASCAR Flange Load SU Door Right NASCAR Flange Load SU Door Center NASCAR Flange Load SU518-1L Door Left NASCAR Flange Load NOTE: SEE PAGE 21 FOR REPLACEMENT 500 SERIES BLADDERS FIA FT5 CERTIFIED Complete SU518 Shown COMPLETE ATL SUPER CELL 500 s Nom. Wt. Lbs. For Nearly 30 Years, ATL has Manufactured the Fuel Bladders for EVERY F1 Race Team! #10 Pick-Up Bolted to Bladder in Right Rear Corner. Available With or Without Surge Tank. FUEL BLADDER COMPATIBILITY SAFE FOR USE WITH: Hydrocarbon Race Fuels with MAXIMUM 15% Blended Ethanol Content. IMSA UNITED SPORTSCAR SERIES FIA FT5 ATL has Built Most of the Custom Bladders for the United SportsCar Racing Series (Formerly Grand-Am & ALMS) with State-Of-The-Art Fuel Scavenging Devices, Custom Fittings and More! 7 SUPER CELL 500 SERIES

8 SUPER CELL 400 SERIES DURABLE SPRINT CAR AND MIDGET ALCOHOL BLADDERS & TAIL TANKS SC433-KK COMPLETE ASSEMBLY Complete Cell Part # Capacity Gal. Product Description YEAR LIMITED WARRANTY Molded, Seamless Outer Tail Tank Natural, Unpainted (Shown Painted) (1) #12 AN (3/4 ) Front Outlet Easy Access Front Cover Panel (4) Threaded Mounting Inserts Meets FIA FT3 Standards FIA FT3 RATED FOR ALCOHOL USE TF497 Aluminum Fill Plate 4 x 6 (1) 2-1/2 Alum. Flush Fill Cap (1) #6 AN (3/8 ) Vent Check Valve (1) #8 AN (1/2 ) Return FB433-KK Bladder COMPLETE FUEL CELL ASSEMBLIES Cell Style Weight lbs. SC Gal. Midget Cell Assembly Replaces Fuel Safe & Saldana 15.9 SC Gal. Sprint Cell Assembly Kinser Outlaw Designed for ATL 21.9 SC428-FS Gal. Sprint Cell Assembly Replaces Fuel Safe P/N SB SC433-FS Gal. Sprint Cell Assembly Replaces Fuel Safe P/N SB SC433-KK Gal. Sprint Cell Assembly Factory Kahne Designed for ATL 26.9 The Absolute LIGHTEST Sprint Fuel Cells ON THE MARKET, PERIOD. ATL SPRINT CELLS ARE DESIGNED WITH A FORWARD LOW, CENTER OF GRAVITY Light-Weight Bladder Tough/Thin/Pliable Internal Seams for Maximum Fuel Capacity Resistant to Methanol & Ethanol Internal Pick-Up Hose Assembly (#12 AN) The Only REPAIRABLE Bladder Anywhere! Easy Installation FUEL BLADDER COMPATIBILITY SAFE FOR USE WITH: 85% to 100% Pure Methanol or Ethanol Fuels TAIL TANK MOUNTING NOTE: SC428 (shown) SC428-FS (shown) SUPER CELL 400 SERIES LIGHTWEIGHT BLADDERS Bladder Part # FB Gal. Midget Bladder Only Replaces Fuel Safe & Saldana 7.0 FB Gal. Sprint Bladder Only Fits Saldana Dirt Midget 7.5 FB Gal. Sprint Bladder Only Kinser Outlaw Designed for ATL 8.0 FB428-FS Gal. Sprint Bladder Only Replaces Fuel Safe P/N SB FB Gal. Midget Bladder Only Fits Saldana Asphalt Midget 9.0 FB Gal. Sprint Bladder Only Saldana Style 10.5 FB433-FS Gal. Sprint Bladder Only Replaces Fuel Safe P/N SB FB433-KK Gal. Sprint Bladder Only Factory Kahne Designed for ATL 10.5 FB Gal. Sprint Bladder Only Fits Saldana Asphalt Midget 11.5 MOLDED TAIL TANKS Tail Tank Part # Capacity Gal. Capacity Gal. Product Description Product Description Cell Style Cell Style Weight lbs. Weight lbs. TT Gal. Tail Tank Only Kinser Outlaw Designed for ATL 13 TT428-FS Gal. Tail Tank Only Replaces Fuel Safe P/N ST TT433-FS Gal. Tail Tank Only Replaces Fuel Safe P/N ST TT433-KK Gal. Tail Tank Only Factory Kahne Designed for ATL 16 Built-In 2 Door Surge Tank Add -BI2 to Cell or Bladder Part # Built-In Baffle Add -B to Cell or Bladder Part # Tail Tank Painting Instructions are Available at: atlinc.com > Literature > Bulletins & Data-Sheets > DS-545 OPTIONS, ACCESSORIES & REPLACEMENT PARTS TF Micron, Vertical Fuel Filter for Surge Tank Use TF Micron, 90 Horizontal Fuel Filter ATL & KAHNE STYLE Upper Inserts: Outside (L&R) Lower Inserts: Inside (L&R) (Facing Torsion Rack) LIGHTWEIGHT FILL PLATE NEW! TF752 4 x 6 Aluminum Fill Plate Assembly by Factory Kahne with (2) #6 & (1) #8 Fittings and Threaded Cap with Vent Valve. Add -FK to Cell Part # TF497 4 x 6 Aluminum Fill Plate Assembly FUEL SAFE STYLE Upper Inserts: Outside (L&R) Lower Inserts: Outside (L&R) For All P/N s with -FS TF478 #12 (3/4 ) Pick-Up Hose Assembly 8

9 SUPER CELL 300 SERIES NASCAR HOME TRACK & ARCA APPROVED BLADDERS Complete SU322D-1 Shown Powder Coated 20 Gauge Steel Container (Can) TF500 Heavy-Duty Ball Valve (1) 2-1/2 O.D. Ball Check Fill (1) 1-1/2 O.D. Ball Vent (1) #8 or #10 Outlet (See Chart Below) FB322D-1 Bladder FIA FT3.5 CERTIFIED NASCAR 2000 APPROVED FOR K&N Pro Series, Canadian Tire Series, & Whelen Modified Series ALSO APPROVED FOR USE IN THE ARCA SERIES! FUEL BLADDER COMPATIBILITY SAFE FOR USE WITH: Hydrocarbon Race Fuels with MAXIMUM 15% Ethanol Content. Light Kevlar Bladder for Maximum Volume Precision Fit for Increased Capacity 3 Ply Construction, Coated In & Out For Hydrocarbon Fuels and E15 Cross-Drilled Composite Nut-Ring SF103 Safety Foam Baffling YEAR LIMITED WARRANTY COMPLETE ATL SUPER CELL 300 s Complete Capacity Container Dimensions Cell Part # Gal. Liters L W H Outlet Size Built-In Surge Tank SU322B* #8 NONE Top Load SU322D #10 NONE Flange Load SU322D #10 2-DOOR Flange Load SU322D #10 3-DOOR Flange Load * B Cells use TF-193A-184A Quick-Fill Flapper Valve NOTE: 300 Series Bladders Available in ALL Standard ATL Sizes from 5 to 44 gallons (See pg. 21) Complete SU222B Shown SUPER CELL 200 SERIES FB222B Bladder Nom. Wt. Lbs. FIA FT3.5 Container Style (See Pg. 22) FIA FT3.5 CERTIFIED FIA FT3.5 FWD SUPER CELL 300 SERIES OPTIONS 2-Door Surge Tank Oval Track Install SU322D-1 SF112 Large Pore Foam Add -LPF to Cell Part # FWD 3-Door Surge Tank Road Race Install SU322D-2 End Load Container For D Cells Only Not Legal for K&N & ARCA Add -EL to Cell Part # NASCAR 2000 APPROVED FOR K&N Pro Series, Canadian Tire Series, & Whelen Modified Series ALSO APPROVED FOR USE IN THE ARCA SERIES! FUEL BLADDER COMPATIBILITY SAFE FOR USE WITH: Hydrocarbon Race Fuels with MAXIMUM 15% Ethanol Content. Powder Coated 20 Gauge Steel Container (Can) YEAR LIMITED WARRANTY Durable 3-Ply Heavy Duty Bladder For Hydrocarbon Fuels and E15 Cross-Drilled Composite Nut-Ring SF103 Safety Foam Baffling COMPLETE ATL SUPER CELL 200 s Complete Capacity Container Dimensions Cell Part # Gal. Liters L W H Outlet Size SU222B #8 Top Load SU222C #8 Vertical Edge SU222D* #10 Flange Load SU222D-EL* #10 End Load SU222E #8 Vertical Edge * SU222D and SU222D-EL Cells have a TF500 Ball Valve and #10 Outlet NOTE: 200 Series Bladders Available in ALL Standard ATL Sizes from 5 to 44 gallons (See pg. 21) TF193A-184A Quick-Fill Flapper Valve (1) 2-1/4 O.D. 45 Flapper Fill Valve (1) 1-1/2 O.D. Vent Valve (1) #8 ScavenJet Fuel Pick-Up (1) #8 Outlet (1) #6 Return (1) #6 Dipstick Nom. Wt. Lbs. Container Style (See Pg. 22) FWD SUPER CELL 200 SERIES OPTIONS 2-Door Surge Tank Add -1 (2 Door) to P/N (Circle Track Applications) SF112 Large Pore Foam Add -LPF to Cell Part # See Pg. 22 FWD 3-Door Surge Tank Add -2 (3 Door) to P/N (Road Race Applications) Additional NASCAR Quick-Fill Valves 9 SUPER CELL 300 SERIES

10 BANTAM SERIES THE THINNEST & MOST LIGHTWEIGHT FABRIC BLADDER BB124B Bladder FIA FT3 CERTIFIED BANTAM SERIES Complete SUBA124B Shown Light-Weight Aluminum Container (Can) FUEL BLADDER COMPATIBILITY SAFE FOR USE WITH: Hydrocarbon Race Fuels with MAXIMUM 15% Ethanol Content. Complete Capacity Container Dimensions Cell Part # Gal. Liters L W H Outlet Size Container Style (See Pg. 22) SUBA #6 Top Load SUBA #6 Top Load SUBA #6 Top Load SUBA #8 Top Load SUBA115B #8 Top Load SUBA117* #8 Vertical Edge SUBA122A #8 Top Load SUBA122B #8 T-Load/S-Box SUBA122C #8 Vertical Edge SUBA122E #8 Vertical Edge SUBA122F* #8 Vertical Edge SUBA122H* #8 Vertical Edge SUBA124A #8 Top Load SUBA124B #8 Shoe Box SUBA124M** #8 Shoe Box SUBA126A #8 Top Load SUBA126B #8 Top Load SUBA126C #8 Top Load SUBA #8 Top Load SUBA132A #8 Top Load SUBA132B #8 Top Load SUBA132C #8 Top Load SUBA #8 Top Load * Indicates Fill Plate Offset ** Fill Plate Offset, Designed for use in Troyer Dirt Modified NOTE: SEE PAGE 21 FOR REPLACEMENT BANTAM SERIES BLADDERS BANTAM SERIES OPTIONS TF703 Off-Set Remote-Fill Paddle Valve Add -OS to Cell Part # TF525 Quick-Fill Paddle Valve Add -PV to Cell Part # YEAR LIMITED WARRANTY COMPLETE ATL BANTAM FUEL CELLS Light-Weight TF600 Aluminum Fill Plate (1) E-Z Grip Billet Aluminum Cap & Neck w/ Flap Valve (1) #6 Vent-Check Roll-Over Valve (1) #6 Dipstick (1) #6 or #8 Outlet Fitting (See Chart) #10 Outlet Available Upon Request Nom. Wt. lbs. FIA FT3 TF702 Quick-Fill, Off-Set Paddle Valve Add -PV2 to Cell Part # POPULAR WITH DIRT MODIFIEDS & ASPHALT LATE MODELS! Ultra Light-Weight Bladder Strong/Thin/Pliable Ballistic Kevlar Only.030 thick (0.7mm), Allows for Greater Fuel Capacity FIA FT3 Certified For Hydrocarbon Fuels and E15 Composite Nut-Ring Flange (1) #6 or #8 ScavenJet Pickup (See Chart Below) Contains SF103 Safety Foam Baffling for Slosh & Explosion Suppression IDEAL FOR LONG DISTANCE RACES! MAXIMUM FUEL, MINIMAL WEIGHT Custom Shop Custom Sizes and Shapes Also Available, Please Send a Dimensioned Drawing to an ATL Sales Engineer to Receive a Free Quote! Built-In Surge Tank Add -BI2 (2 Door) to P/N (Circle Track) Add -BI3 (3 Door) to P/N (Road Race) See Pg. 19 Fuel Level Kit Add -LS to Cell Part # See Pg

11 SUPER CELL 100 SERIES MOST POPULAR RUBBERIZED FABRIC BLADDER FIA FT3 CERTIFIED Powder Coated 20 Gauge Steel Container (Can) (Alum. Optional) Complete SU122E Shown YEAR LIMITED WARRANTY FIA FT3 FB122E Bladder Light-Weight TF600 Alum. Fill Plate (1) E-Z Grip Billet Aluminum Cap & Neck w/ Flap Valve (1) #6 Vent-Check Roll-Over Valve (1) #6 Dipstick (1) #6 or #8 Outlet Fitting (See Chart) Super Tough, 3-Layer Soft Bladder Reinforced with Ballistic Nylon For Hydrocarbon Fuels and E15 Rubber Coated In & Out FIA FT3 Certified (1) #6 or #8 ScavenJet Pickup (See Chart) Cross-Drilled, Composite Nut-Ring Contains SF103 Safety Foam Baffling for Slosh & Explosion Suppression Internal 5-Year Test Strip FUEL BLADDER COMPATIBILITY SAFE FOR USE WITH: Hydrocarbon Race Fuels with MAXIMUM 15% Ethanol Content. COMPLETE ATL SUPER CELL 100 s Complete Capacity Container Dimensions Cell Part # Gal. Liters L W H SU #6 Top Load SU #6 Top Load SU #6 Top Load SU #8 Top Load SU115B #8 Top Load SU117* #8 Vertical Edge SU118D** #8 Flange Load SU118M-AC #8 Bottom Load SU118W-AC & #8 Vertical Edge SU122A #8 Top Load SU122B #8 Top Load SU122C #8 Vertical Edge SU122E #8 Vertical Edge SU122F* #8 Vertical Edge SU122H* #8 Vertical Edge SU122W & 6 34 #8 Vertical Edge SU124A #8 Top Load SU124B-AC #8 Shoe Box SU124M-AC*** #8 Shoe Box SU126A #8 Top Load SU126B #8 Top Load SU126C #8 Top Load SU #8 Top Load SU132A #8 Top Load SU132B #8 Top Load SU132C #8 Top Load SU132D #8 Top Load SU #8 Top Load * Indicates Fill Plate Offset **18 Gauge Steel Container *** Fill Offset, Designed for use in Troyer Mod NOTE: SEE PAGE 21 FOR REPLACEMENT 100 SERIES BLADDERS OTHER EXAMPLES OF ATL SUPER CELL 100 s Nom. Wt. Lbs. Outlet Size Container Style (See Pg. 22) SU118D SU118M-AC SU118W-AC SUPER CELL 100 SERIES OPTIONS TF703 Off-Set Remote-Fill Paddle Valve Add -OS to Cell Part # TF193A-184A Quick-Fill Flapper Valve Add -FV to Cell Part # Fuel Level Kit Add -LS to Cell Part # See Pg. 25 FORWARD SU122F-FV (Fill Offset) TF525 Quick-Fill Paddle Valve Add -PV to Cell Part # Built-In Surge Tank Add -BI2 (2 Door) to P/N (Circle Track Applications) Add -BI3 (3 Door) to P/N (Road Race Applications) See Pg. 19 Aluminum Can Add -AC to Cell Part # See Pg SUPER CELL 100 SERIES

12 SPORTS CELL ECONOMY SERIES OVAL, ROAD RACE, OFF-ROAD, DRIFT, DRAG, VINTAGE FIA FT3 CERTIFIED Complete SP115 Shown MB115 Bladder Molded Seamless Bladder - FIA FT3 Excellent Resistance to Race Gas, E85, Ethanol & Methanol Composite Nut-Ring Contains SF103 Safety Foam Baffling for Slosh & Explosion Suppression (For 100% Alcohol, use SF110 Foam) FIA LABELING Powder Coated 20 Gauge Steel Container (Can) FUEL BLADDER COMPATIBILITY SAFE FOR USE WITH: Race Gas, E85, Ethanol & Methanol Blends up to 100% (For 100% Alcohol, use SF110 Foam) SF110 Alcohol Foam Add -MF to Cell Part # (2) Duck Foot Pick-Ups with Fuel Traps & Filters YEAR LIMITED WARRANTY NEW FIA LABELING & HOLOGRAM AVAILABLE. PLEASE SEE PAGE 27 TF195 Steel Fill Plate (1) ATL Flap-Type Roll-Over Valve (1) Twist Cap & Neck (2) #6 or #8 Outlets (See Chart Below) (1) #6 Vent-Check Roll-Over Valve SPORTS CELL SERIES COMPLETE ATL SPORTS CELLS Complete Capacity Container Dimensions Cell Part # Gal. Liters L W H Outlet Size SP105* #6 Top Load SP #6 Top Load SP #6 Top Load SP #6 Top Load SP #8 Top Load SP122A #8 Top Load SP122B #8 Top Load SP122C #8 Vertical Edge SP126A #8 Top Load SP126B #8 Top Load SP126C #8 Top Load SP132A #8 Top Load SP132B #8 Top Load SP132C #8 Top Load SP132D #8 Top Load SP #8 Mid-Lip * SP105 uses a 4 x6 fill plate, will not accept any options except for SF110 NOTE: SEE PAGE 21 FOR REPLACEMENT SPORTS CELL SERIES BLADDERS psi (each) CFD-650-HP 3-Door Molded Surge Tank with Dual CFD-104 HP Pumps (Fits 12 gal.+ Cells) Add -ST5 to Cell Part # See Pg. 20 ADVANCED FUEL SCAVENGING UPGRADES NEW! psi CFD-700-HP Black Box Surge Tank Kit w/ KS163 HP Bosch Pump Add -ST4 to Cell Part # See Pg. 20 Nom. Wt. Lbs psi CFD-600-HP Black Box Surge Tank Kit w/ CFD-104 HP Pump Add -ST2 to Cell Part # See Pg. 20 Container Style (See Pg. 22) NO PUMP ST528 3-Door Molded Surge Tank (No Pump) Add -ST1 to Cell Part # See Pg. 19 SPORTS CELL OPTIONS TF600 Aluminum Fill Plate Add -AF to Cell Part# TF525 Quick-Fill Paddle Valve Add -PV to Cell Part # Fuel Level Kit Add -LS to Cell Part # See Pg. 25 Save Weight! Quick REFUELING FUEL LEVEL MAX-SPORT CELL Aluminum Can Add -AC to Cell Part # See Pg. 22 TF703 Off-Set Remote-Fill Paddle Valve Add -OS to Cell Part # TF207 Dip Stick Kit Add -DS to Cell Part # See Pg. 25 Add -MAX to Cell Part # For: Competition Fuel Delivery CFD600-HP Black Box Kit w/ 3-Door Surge Tank & 100 psi EFI Racing Fuel Pump (see pg. 20) Lightweight Aluminum Container Return Fitting and Cross-Drilled Nut-Ring TF600 Lightweight Aluminum Fill Plate & Valve w/ Wire Harness & Bulkhead 12

13 DIRT LATE MODEL SPORTS CELLS TOURING OR WEEKLY, SUPER OR CRATE FIA FT3 CERTIFIED NEW! Complete Cell Part # Complete SP126C-LM Shown Powder Coated 20 Gauge Steel Container (Can) TF626 Rigid-Flex Alky-Tube Pick-Up Capacity Gal. Liters Container Dimensions L W H SP122B-LM #10 Top Load SP126C-LM #10 Top Load SP128-LM #10 Top Load SP132B-LM #10 Top Load SP132D-LM #10 Top Load DIRT LATE MODEL SPORTS CELL OPTIONS TF600 Aluminum Fill Plate Add -AF to Cell Part# Save Weight! TF195 Steel Fill Plate Twist Cap Fill Neck with Flap Valve #10 Pick-Up to Right Rear Corner #10 Fitting for Dipstick or Return #6 Ball-Type Vent Check Valve COMPLETE ATL DLM SPORTS CELLS Aluminum Can Add -AC to Cell Part # See Pg. 22 Nom. Wt. Lbs. TF627 #10 Dip Stick & Guide Add -DS to Cell Part # Outlet Size MB126C Bladder Container Style (See Pg. 22) Colored Cans Add -B for Black Add -W for White Molded Seamless Bladder - FIA FT3 Excellent Resistance to Race Gas, E85, Ethanol & Methanol Composite Nut-Ring Contains SF103 Safety Foam Baffling for Slosh & Explosion Suppression (For 100% Alcohol, use SF110 Foam) YEAR LIMITED WARRANTY FUEL BLADDER COMPATIBILITY SAFE FOR USE WITH: Race Gas, E85 Ethanol & Methanol Blends up to 100% (For 100% Alcohol, use SF110 Foam) SF110 Add -MF to Cell Part # NEW! Only FWD 39LBS. SP128-LM 28 GALLON FUEL FORWARD DESIGN Innovative Design at an Economical Price! This Fuel Cell Features a Hard Rubber Molded Bladder with Safety Foam Baffling, Aluminum Fill Plate and Aluminum Container. Fits ANY DLM Chassis! Also Available with Ultra-Light Super Cell Bladder! NEW! DLM SUPER CELLS BLADDER 45% LIGHTER THAN SPORTS CELL! Complete Cell Part # Capacity Gal. Liters SP126C-LM-AC Shown For the Serious Racer Looking for the Ultimate Weight Advantage! The ATL DLM Super Cell Features a Lightweight Nylon Reinforced Soft Rubber Bladder, Aluminum Fill Plate and an Aluminum Container! Also Available in ATL s BANTAM Material, Our Thinnest! See Pg.10 COMPLETE ATL DLM SUPER CELLS Container Dimensions L W H Nom. Wt. Lbs. Outlet Size Container Style (See Pg. 22) SU122B-LM-AC #10 Top Load SU126C-LM-AC #10 Top Load SU128-LM-AC #10 Top Load SU132B-LM-AC #10 Top Load YEAR LIMITED WARRANTY CHASSIS-SPECIFIC CUSTOMS Ask About our Custom, Chassis-Specific Fuel Cells Available in Both Gas and Alcohol Compatible Lightweight Bladder Materials! DIRT LATE MODEL SERIES 13

14 SAVER CELL ECONOMY SERIES THE DO-IT-YOUR-SELF FUEL CELL - CONSTRUCT YOUR OWN METAL CAN! SA115 Shown (1) #6 or #8 Duck Foot Pick-Up & Strainer (See Chart Below) YOU Build Steel or Aluminum Container. Drawings are Provided. FIA FT3 CERTIFIED Molded Seamless Bladder - FIA FT3 Excellent Resistance to Race Gas, E85, Ethanol & Methanol Composite Nut-Ring Contains SF103 Safety Foam Baffling for Slosh & Explosion Suppression (For 100% Alcohol, use SF110 Foam) FIA LABELING NEW FIA LABELING & HOLOGRAM AVAILABLE. PLEASE SEE PAGE 27 SAVER CELL SERIES Complete Cell Part # SA105* #6 SA #6 SA #6 SA #6 SA #8 SA122A #8 SA122B #8 SA122C #8 SA126A #8 SA126B #8 SA126C #8 SA132A #8 SA132B #8 SA132C #8 SA132D #8 SA #8 * SA105 uses a 4 x6 fill plate, will not accept any options except for SF Well Cell 22 Dia # Well Cell 22 Dia #6 RACELL SERIES Complete Cell Part # TF195 Steel Fill Plate (1) ATL Flap-Type Roll-Over Valve (1) Twist Cap & Neck (1) #6 or #8 Outlets (See Chart Below) (1) #6 Return (1) #6 Vent-Check Roll-Over Valve COMPLETE ATL SAVER CELLS 20 Capacity Gal. Liters Capacity Gal. Liters Bladder Dimensions L W H ATL WELL CELL Bladder Dimensions L W H Pick-Up Size Unique Shape Fits in Spare Tire Well of Most Vehicles. Available in Two Sizes. (See Chart Below) IDEAL FOR DRAG RACING & HILL CLIMBS Nom. Wt. Lbs. 3 Aircraft-Style Flush Cap & Nut-Ring Optional Aluminum Mounting Brackets Nom. Wt. Lbs. Mounting Brackets RA KS111 RA KS112 YEAR LIMITED WARRANTY TF703 Off-Set Remote-Fill Paddle Valve Add -OS to Cell Part # ST528 3-Door Molded Surge Tank Add -ST1 to Cell Part # See Pg. 19 NEW! psi (each) RA105 5 Gallon Shown FUEL COMPATIBILITY SAFE FOR USE WITH: Race Gas, E85, Ethanol & Methanol Blends up to 100% (For 100% Alcohol, use SF110 Foam) SF110 Alcohol Foam Add -MF to Cell Part # SAVER CELL OPTIONS NO PUMP TF207 Dip Stick Kit Add -DS to Cell Part # See Pg psi CFD-600-HP Black Box Surge Tank Kit w/ CFD104 HP Pump Add -ST2 to Cell Part # See Pg. 20 FIA FT3 CERTIFIED Fuel Level Kit Add -LS to Cell Part # See Pg. 25 CFD-700-HP Black Box Surge Tank Kit w/ HP Bosch KS163 Pump Add -ST4 to Cell Part # See Pg. 20 CFD-650-HP 3-Door Molded Surge Tank with Dual CFD-104 HP Pumps Add -ST5 to Cell Part # - See Pg psi Seamless Hard Rubber Bladder (2) #8 (1/2 ) Lower Outlets (1) #8 (1/2 ) Return (1) #6 (3/8 ) Vent with Check Valve SF103 Safety Foam Baffling (Specify SF110 for Alcohol Use) FUEL COMPATIBILITY SAFE FOR USE WITH: Race Gas, Ethanol & Methanol Blends up to 100% (For 100% Alcohol, use SF110 Foam) 14

15 CUSTOM & VINTAGE CUSTOM & VINTAGE FUEL CELLS ATL CAN BRING YOUR IDEAS TO LIFE! CUTTING EDGE TECHNOLOGY & CHAMPIONSHIP WINNING PERFORMANCE... For Any Race/Rally Car, Old or New! From Spec Series to LM Prototypes, ATL builds precision-fit, CAD-engineered bladders of rubberized fabric to your specific needs. ATL also provides a wide variety of Custom Fittings and Nut-Rings, together with the engineering staff to develop an entire fuel system. ATL CAN CUSTOM BUILD A FUEL BLADDER THAT... IS BASED ON YOUR SPECIFIED DIMENSIONS: FITS AN EXISTING TANK, (STEEL, ALUM. OR CARBON FIBER): DIRECTLY REPLACES A COMPETITOR S BLADDER: ATL builds custom fuel cells for Bentley, MG, VW, Peugeot, Ferrari, Ford, Porsche, Lamborghini, McLaren, Radical, Dallara, Audi, Riley & Scott, Pratt & Miller, Mercedes, Aston Martin Racing, GM, Dodge, Kia, AAR, Rocket Chassis, Subaru Rally, Mitsubishi, Multimatic, Oreca, Cougar, Honda, TRD, Renault F1, Lister, Lotus, Corvette, Morgan, BMW Motorsport... and the list goes on! FIA FT3 CERTIFIED FIA FT3.5 CERTIFIED FIA FT5 CERTIFIED CUSTOM CONTAINERS STEEL & ALUMINUM Looking for the complete package? ATL has the capabilities to precision build not only the fuel bladder but also the outer container (can) for your custom project! 15

16 RALLY FUEL BLADDERS WORLD RALLY CHAMPIONSHIP, RALLY AMERICA, RALLY CROSS PLEASE READ Important Details Regarding New FIA Hologram and Labeling Procedures, Please See Page 27 For Info! SUBARU IMPREZA BLADDERS FIA FT3 & FT3.5 CERTIFIED FIA FT3 Version Shown with Optional Carbon Cover P/N: SUB82 Subaru Impreza (GRP N) Liters Dimensions: 1000 X 595 X 300mm Fuel Bladder (Resistant to Fuels with MAX 15% Ethanol Content) Includes: (2) ATL Fuel Level Gauge Systems, (1) -6 Rollover Vent Valve, (1) -6 Fuel Return, (1) -6 Fuel Outlet, (2) -12 weld-on s to connect to FIA/ Staubli refueling system couplings, Internal Foam Baffle FIA FT3 Version Shown with Optional Aluminum Container P/N: SUB80-12 Subaru Impreza (GRP N) Liters Dimensions: 1090 X 625 X 230mm Fuel Bladder (Resistant to Fuels with MAX 15% Ethanol Content) Includes: (1) ATL Fuel Level Gauge System, (1) -6 Rollover Vent Valve, (1) -6 Fuel Return, (1) -8 Fuel Outlet, (2) -12 weld-on s (FIA WRC Spec) - To connect to Staubli refueling system coupling, Internal Foam Baffle MITSUBISHI LANCER EVO BLADDERS FIA FT3 Version Shown P/N: SUB75 Subaru Impreza (GRP A) 75 Liters Dimensions: 1220 X 340 X 260mm Fuel Bladder (Resistant to Fuels with MAX 15% Ethanol Content) Includes: (1) Oval M6 Nutring (Which can accept a standard Prodrive Collector tank), (1) VDO Sender Nutring, (1) -12 Vent Adapter mounted on plate, Internal Foam Baffle FIA FT3 Version Shown Optional Carbon Cover Available P/N: SUB70 Subaru Impreza (GRP N) 70 Liters Dimensions: 960 X 380 X 270mm Fuel Bladder (Resistant to Fuels with MAX 15% Ethanol Content) Includes: (1) 6x10 Top plate, (1) ATL Fuel Level Gauge System, (1) -6 Rollover Vent Valve, (1) -6 Fuel Return, (1) -8 Fuel Pickup mounted in lower sump, (1) Ø2¼ x 45 Filler Neck for external refueling, Internal Foam Baffle P/N: DC-ZA-007 Mitsubishi Lancer Evo Liters Dimensions: 1010 X 480 X 280mm Fuel Bladder (Resistant to Fuels with MAX 15% Ethanol Content) Includes: (1) Internal Collector, (1) 7 bar Walbro Fuel Pump with Sock Filter, (2) -6 Rollover Vent Valves, (2) ATL Fuel Level Senders, (1) -6 Fuel Return, -12 Staubli refueling fittings, Internal Foam Baffle FIA FT3.5 Versions Shown with Optional Carbon Covers P/N: EVO8/72 Mitsubishi Lancer Evo 8-72 Liters Dimensions: 1050 X 580 X 275mm Fuel Bladder (Resistant to Fuels with MAX 15% Ethanol Content) Includes: (2) Internal Collectors Fitted, (2) 5 bar Bosch Fuel Pumps mounted on top plate, (2) -6 Rollover Vent Valve, (2) ATL Fuel Level Senders, (1) -6 Fuel Return Custom Filler Neck with -12 Staubli refueling fittings, Internal Foam Baffle RALLY RAID BLADDERS The Ultimate Off-Road Endurance Racing Fuel Cell - Dakkar Proven! FIA FT3 Versions Shown with Optional Carbon and Aluminum Covers P/N: EVO7/70 P/N: EVO7/80 Mitsubishi Lancer Evo 7-70 Liters Dimensions: 870 X 520 X 295mm Fuel Bladder (Resistant to Fuels with MAX 15% Ethanol Content) Includes: (2) AC LP Lift Pumps, (1) Integral Swirl Pot on a 6x10 top plate, (1) -6 Rollover Vent Valve, (1) ATL Fuel Level Gauge System, (1) 5 bar Bosch pump with Stainless Steel pre filter, (1) -6 Fuel Return, Internal Foam Baffle Mitsubishi Lancer Evo 7-80 Liters Dimensions: 850 X 440 X 215mm Fuel Bladder (Resistant to Fuels with MAX 15% Ethanol Content) Includes: (1) ATL Flush Filler Cap, (1) -6 Fuel Return, (1) -6 Rollover Vent Valve, (1) ATL Fuel Level Gauge System, (1) 6x10 top plate, (1) -8 Fuel Outlet taken from lower sump (option of a 2nd outlet on opposite side of sump), Internal Foam Baffle FIA FT3 CERTIFIED RALLY FUEL CELLS STANDARD RALLY RAID BLADDERS Complete Capacity Bladder Dimensions Cell Part# Gal. Liters L W H RR RR RR Add -AC for Standard Aluminum Container FIA LABELING NEW FIA LABELING & HOLOGRAM AVAILABLE. PLEASE SEE PAGE 27 FUEL COMPATIBILITY SAFE FOR USE WITH: Hydrocarbon Race Fuels with MAXIMUM 15% Ethanol Content. VIEW OF COLLECTOR SYSTEM Nom. Wt. Lbs. Bottom View of FIA Non-Return Fill Valve CUSTOM RALLY RAID In Aluminum Container TF519 Aluminum Fill Plate (1) 2-1/4 x 45 Filler Neck with FIA Non-Return Fill Valve (1) Level Sender & Gauge (1) #6 Fuel Outlet (1) #6 Fuel Return (1) #6 Rollover Vent Valve Lightweight, Soft Rubber Bladder Centrally Mounted Internal 4 Door Collector with Guide Vanes Composite 6 x 10 Nut-Ring Contains SF103 Safety Foam Baffling for Anti-Slosh and Explosion Suppression HIGH PRESSURE FUEL PUMPS ATL Can Install In-Tank HP Fuel Pumps, Too! 16

17 FORMULA & SPORTS RACER CHASSIS-SPECIFIC FUEL BLADDERS ATL builds hundreds of Formula and Sports Racer bladders each year for hydrocarbon and E15 fuels. Many of those are custom sizes and shapes and include options like built-in collectors and fuel pumps. Any of ATL s bladders can be constructed from their state-of-the-art FluoroCell ALL FUEL material! If you have a unique bladder requirement, simply call ATL and speak to one of our Sales Engineers. WEDGE SHAPED BLADDERS FC150 Shown POD SHAPED BLADDERS A B D FC142 Shown OPTIONAL ALUMINUM CANS Add -AC To Part # B C A C REFERS TO BLADDERS: FC140 FC150 FC152 FC157 REFERS TO BLADDERS: FC142 FC160 FIA FT3 CERTIFIED Fuel Bladder Compatibility: Safe For Use with Hydrocarbon Race Fuels with MAXIMUM 15% Ethanol Content. SPEC RACER FUEL BLADDER STANDARD FORMULA & SPORTS RACER SPECS Complete Cell Part # Capacity Gal. Liters FC140 FC150 FC152 FC157 FC142 FC Bladder Dimensions A B C D Filler Neck Vent Valve Pick Up Nom. Wt. Lbs. 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 #6 AN #6 AN #6 AN #6 AN #6 AN #6 AN #6 AN #6 AN #6 AN #6 AN #6 AN #6 AN FB Gallon Bladder Compatible with Gas up to E15. ALL FUEL Version Available Upon Request! OFFICIAL SUPPLIER OF ENT. VAN DIEMAN REPLACEMENT FUEL BLADDERS With Foam, Nut-Ring & Gasket Fill Plate NOT Included Fuel Bladder Compatibility: Safe For Use with Hydrocarbon Race Fuels with MAXIMUM 15% Ethanol Content. 8.5 Includes Integral Filler Tube & (1) #6 Outlet, Located at the Bottom Center in Rear of Bladder FRONT FB Gallon Replacement Bladder PROFILE FB Gallon Replacement Bladder 1.25 BACK FB Gallon Replacement Bladder Includes Foam, TF350 #6 Vent Valve, (1) #6 Outlet, (2) Nut-Ring Flanges & Gaskets Also Includes 4x6 Nut-Ring & Gasket LENGTH: WIDTH: 14.6 HEIGHT: 12.7 (18.95 w/filler) FB Pro-Formula Mazda BACK BACK FB Mazda Sports Racer FB Mazda Formula Racer All Replacement Formula Mazda Fuel Bladders Include: Bladder (Compatible with Gas up to E15), Safety Foam Baffling, Nut-Ring(s) & Gasket(s) 17 FORMULA & SPORTS RACER FORMULA MAZDA REPLACEMENT FUEL BLADDERS

18 SPECIALTY CELLS ADDITIONAL CHASSIS-SPECIFIC FUEL CELLS PORSCHE FUEL CELLS PORSCHE 911 PORSCHE 911 Compatible with Porsche 911 Model Years 1989 and Earlier 22 W 5.25 PORSCHE 996 PORSCHE H 17 H 9.38 H 9 H Wide Overall SP126P 26 Gallons (100 Liters) SU117P 17 Gallons (65 Liters) POR/ Gallons (100 Liters) POR/ Gallons (100 Liters) FIA FT3 Approved, Molded Hard Rubber Bladder with Aluminum Container. Includes Flap Fill Valve, Twist-Off Cap, #6 Vent Valve, #6 Pick-Up with Strainer, #6 Return, and Safety Foam Baffling. SAFE FOR USE WITH: Race Gas, Ethanol & Methanol Blends up to 100% (For 100% Alcohol, use SF110 Foam) FIA FT3 Approved, Nylon Reinforced Soft Rubber Bladder with Aluminum Container. Includes Flap Fill Valve, Billet Aluminum Twist-Off Cap, #6 Vent Valve, #6 ScavenJet Pick-Up, #6 Return, Safety Foam Baffling & Mounting Kit. For Use with Hydrocarbon Race Fuels with MAX 15% Ethanol Content. POR/996CC Carbon Cover POR/997CC Carbon Cover Both the Porsche 996 and 997 Fuel Cells Feature: FIA FT3 Approved Nylon Reinforced Bladder with SF103 Safety Foam Baffling. Bladder Constructed with Integral Reserve and Main Fuel Collector Chambers with (4) Internal Lift Pumps. (1) 2 Dual Filler Dry Break also Included. SAFE FOR USE WITH: Hydrocarbon Race Fuels with MAXIMUM 15% Ethanol Content. FIA LABELING FERRARI FUEL CELLS FERRARI 360 & 430 Includes: FIA FT3 Approved Ballistic Nylon Replacement Bladders (Left and Right Side - Compatible with Hydrocarbon Race Fuels with MAXIMUM 15% Ethanol Content.), Includes: SF103 Safety Foam Baffling, Nut-Rings & Gaskets. NEW FIA LABELING & HOLOGRAM AVAILABLE. PLEASE SEE PAGE 27 FERRARI F-40 (EURO SPEC) Includes: FIA FT3 Approved Nylon Reinforced Replacement Bladders (Compatible with Hydrocarbon Race Fuels with MAXIMUM 15% Ethanol Content.) Includes: SF103 Safety Foam Baffling and Hardware (Listed Below). FB FIA FT3 Approved OEM Fit to Accept Factory Pumps FB FIA FT3 Approved OEM Fit to Accept Factory Collector Left Side Bladder: is supplied fully foam baffled and fitted with a 87mm aluminum filler neck, #6 rollover vent valve, level gauge, nut-ring, oval side nut-ring and plate, internal collector (with bottom nut-ring and plate), 35mm aluminum neck, #10 fuel outlet and #6 fuel return. Gaskets Included. Right Side Bladder: is supplied fully foam baffled and fitted with a 87mm aluminum filler neck, #6 rollover vent valve, oval side nut-ring and plate and 35mm aluminum neck. Gaskets Included. CATERHAM RACING FORD MUSTANG FR500C (Gen. 1) CHEVY CAMARO & FORD MUSTANG SPECIALTY CELLS Dimensions: 34 x 18 x 10 Dimensions: 23.5 Diameter - 10 Height FB FIA FT3 Approved 14 Gallons (55 Liters) FB FIA FT3 Approved 22 Gallons (85 Liters) FIA FT3 Approved Call For Available Styles Includes FIA FT3 Approved Nylon Reinforced Bladder (Compatible with Hydrocarbon Race Fuels with MAX. 15% Ethanol Content), Safety Foam Baffling, Nut-Rings with Gaskets, Level Sending Probe with Gauge, Fill Plate & Aluminum Container with Latch-Closure Lid. Includes FIA FT3 Approved Nylon Reinforced Bladder (Compatible with Hydrocarbon Race Fuels with MAXIMUM 15% Ethanol Content), Safety Foam Baffling, Nut-Ring with Gasket and 3-Door Internal Collector with Pump Holder. ATL Offers Bladders to Fit Most Later Model RACE VERSIONS of the New Chevrolet Camaro and Ford Mustang. Call for Details. 18 BMW SUPER WELL CELL FB FIA FT3 Approved 17 Gallons (65 Liters) Includes FIA FT3 Approved Nylon Reinforced Bladder (Compatible with Hydrocarbon Race Fuels with MAX. 15% Ethanol Content), Safety Foam Baffling, Nut-Ring, Fill Plate and Internal Collector. Fits in the Spare Tire Well of Most Later Model BMW s. (Other Vehicles, Too!)

19 FUEL SCAVENGING DEVICES SURGE TANKS, FUEL PICK-UPS & HARDWARE DROP-IN SURGE TANKS What is a Surge Tank? Surge Tanks, also called collectors, are small semi-flexible tanks installed inside the main fuel cell bladder. ATL s Surge Tanks maintain a reservoir of fuel around the fuel pickup to prevent engine starvation during acceleration, cornering, braking or at low fuel levels. (For gasoline or diesel unless otherwise stated) Typical 2-Door Surge Tank Installation Typical 3-Door Surge Tank Installation Surge Tank Features: Uses Exclusive ATL Trap Doors Scavenges Down to the Last Drop For Primary Collection or Reserve Works w/ Internal or External Fuel Pump Eliminates Fuel Starvation & Air Entrapment Easily Installed and Held in Place by Safety Foam Light & Thin for Minimal Fuel Displacement Flexible on Impact; Won t Cut Bladder Custom Sizes Available FLEXIBLE FABRIC SURGE TANKS SUITABLE FOR GAS OR DIESEL ONLY MOLDED SURGE TANKS FOR ALL FUELS ST520 3-Door Surge Tank For Road Course, Rally & Off-Road Applications Use Capacity:.8 Gallons Dimensions: 8 x 5 x 5 ScavenJet #10 AN Standard (Optional #6, #8) ST524 2-Door Surge Tank For Circle Track Use Capacity:.8 Gal. Dimensions: 8 x 5 x 5 ScavenJet #10 AN Standard (Optional #6, #8) SCAVENGING DEVICES TF479 ScavenJet Fuel Pick-Up Factory Sealed to Floor of Bladder or Surge Tank. Specify AN #6, #8, #10 TF626 #10 Rigid-Flex Alky-Tube Pick-Up (Fits SP126C-LM & SP132B-LM) Custom Length by Special Order For Methanol/Ethanol/Gas ScavenJet Ready Fuel Pick-Up Hose Includes (1) STRAIGHT and (1) 90 End Overall Length is 22 TF239-S #6 AN (3/8 ) P/U TF240-S #8 AN (1/2 ) P/U TF442-S #10 AN (5/8 ) P/U ST533 2-Pump Surge Tank Dimensions: 10 x 5 x 5 Accepts (2) CFD psi EFI Pumps (Not Included). 3 Doors. Other Sizes and Config. Avail. ITC300 3-Door Surge Tank w/ Vanes Capacity:.6 Gal Dimensions: 5 x 7 x 5 ScavenJet #8 AN Standard (Optional #6) Ideal for Road, Rally and Off-Road Racing. Duck Foot Fuel Trap Pick-Ups with Filter Overall Length is 22 TF239 #6 AN (3/8 ) P/U TF240 #8 AN (1/2 ) P/U TF442 #10 AN (5/8 ) P/U ST508 Molded NO DOOR Surge Tank Capacity:.6 Gal Dimensions: 5 x 5 x 6 With Foam. Requires (1) Fill Pump & (1) Scavenge Pump, Internal or External TF520 Fuel Vac Multi-Point Fuel Pick-Up 5/16 (8mm) ST528 3-Door Molded Surge Tank Capacity:.6 Gal Dimensions: 5 x 5 x 6 For Off-Road, Road Race & Rally - #8 AN ScavenJet & Hose Standard (Optional #6) Ideal for Rock Crawlers & Road Racing! Helps Eliminate Fuel Starvation SOLD SEPARATELY Sock Fuel Filters For Gas and/or Alcohol TF268 Fits #6 Fuel Pick-Up TF269 Fits #8 Fuel Pick-Up TF270 Fits #10 Fuel Pick-Up NEW! FIA FT3 CERTIFIED Shown with (4) #6 Inlets TF384 TF247 Push-Lock Hose End Fittings AN-6,-8,-10 (Steel) -10 TF246 TF153-8 TF203-6 TF161 ATL SWIRL POTS - ELIMINATE FUEL STARVATION & HESITATION! Optional Aluminum Mounting Base Plate Add -BP to Cell Part # Fuel Hose Sold Per Foot SUITABLE FOR ALL FUELS TF159 #6 AN Fuel Hose, 3/8 ID TF197 #8 AN Fuel Hose, 1/2 ID TF212 #10 AN Fuel Hose, 5/8 ID ST540 Molded Hard Rubber External Fuel Swirl Pot With Aluminum Mounting Clamps 1.5 Liter (.4 Gallon) Capacity (4) Inlet Ports (2 #6 Fittings, 2 Plugs), (1) #8 Return, & (1) #8 Outlet Alternate Fitting Configurations Available Upon Request 2 3/4 KS145 Trap Door & Mounting Hardware Kit Composite Door with Stainless Steel Back Plate & Screws. Gas & Alcohol Compatible. ITC305 Aluminum External Fuel Swirl Pot 1.5 Liter (1) #8 Outlet, (2) #6 Inlets, (1) #6 Return, (1) #6 Bleed 2 5/8 19 FUEL SCAVENGING

20 CFD COMPETITON FUEL DELIVERY IN-TANK BLACK BOX KITS, FUEL PUMPS & HARDWARE ELECTRONIC FUEL INJECTION (EFI) APPLICATIONS NEW! (Top View) (Top View) (Top View) CARBURETOR APPLICATIONS (Top View) 102 LPH (27 100psi each DUAL HP Pump 200 LPH (53 100psi Bosch HP Pump 102 LPH (27 100psi High Pressure Pump 75 LPH (20 4psi Low Pressure Lift Pump CFD-650-HP Dimensions: 4.75 x 8.75 x 6 BLACK BOX KIT *FACTORY INSTALLED* CFD-650-HP Black Box Kit Includes: Surge Tank: ATL 3-Door Molded (.8 Gallon) Pumps: (2) CFD psi, 12V Pump Hardware Included: (2) CFD-403-5/16 x 16 Flex Tube (2) CFD Stubby Filter (2) TF602 - #6 Outlet Bulkhead Fitting (2) CFD Wire Bulkhead Fitting (2) CFD Wire Harness 40 CFD-700-HP Black Box Kit Includes: Surge Tank: ATL 3-Door Molded (.6 Gallon) Pump: KS psi, 12V 044 Bosch Pump Hardware Included: CFD Rubber Fuel Hose with (2) 90 Hose Ends CFD Stubby Filter & Adapter TF204 - #6 Outlet Bulkhead Fitting CFD Wire Bulkhead Fitting CFD-501-S - 2-Wire Kit with Ends FUEL PUMPS & HARDWARE Dimensions: 5 x 5 x 6 CFD-700-HP BLACK BOX KIT CFD-600-HP Black Box Kit Includes: Surge Tank: ATL 3-Door Molded (.6 Gallon) Pump: CFD psi, 12V Pump Hardware Included: CFD-403-5/16 x 16 Flex Tube CFD Off-Set Filter TF602 - #6 Outlet Bulkhead Fitting CFD Wire Bulkhead Fitting CFD Wire Harness 40 Corrugated Fuel Tube 5/16 I.D. Includes (2) Clamps Dimensions: 5 x 5 x 6 CFD-600-HP BLACK BOX KIT Dimensions: 5 x 5 x 6 CFD-600-LP BLACK BOX KIT CFD-600-LP Black Box Kit Includes: Surge Tank: ATL 3-Door Molded (.6 Gallon) Pump: CFD psi, 12V Lift Pump Hardware Included: CFD-403-5/16 x 16 Flex Tube CFD Stubby Filter TF602 - #6 Outlet Bulkhead Fitting CFD Wire Bulkhead Fitting CFD-501-S - 2-Wire Kit with Ends SPECIAL NOTE REGARDING CFD-600-LP BLACK BOX TO INCREASE FUEL PRESSURE, Connect CFD-600-LP Kit In Series With Your 12V External Fuel Pump, 8 to 12 psi psi psi 75 4psi Fuel Outlet Bulkhead Fitting KS psi (Bosch 044) High-Pressure, In-Tank, EFI-Ready Fuel Pump CFD psi High-Pressure, In-Tank, EFI-Ready Fuel Pump CFD psi Low-Pressure In-Tank, Lift Pump CFD Length CFD Length CFD Length For CFD-106 & CFD-104 TF602 #6 AN with 5/16 Nipple For use with CFD-600-HP, CFD-650-HP & CFD-600-LP FUEL DELIVERY CFD-206 Filter & Adapter Bosch 044 Pump For KS163 CFD Wire Standard Wire-Thru Bulkhead 12 or 14 Gauge Compatible TF727 Pig-Tail Filter 12 Long, For KS163 CFD Wire Metallic Wire-Thru Bulkhead 12 or 14 Gauge Compatible AN Fittings for Bosch 044 Pump (KS163) TF739 #6 AN for Outlet TF740 #8 AN for Outlet TF741 #6 AN for Inlet TF742 #8 AN for Inlet CFD-204 Stubby Filter For CFD-106 Quick Release Electrical Fitting CFD Wire CFD Wire KS154-L Filter For CFD-106 CFD-205 Stubby Filter For CFD-104 CFD-501 Electrical Wire Harness For CFD-104 Pump 40 in Length CFD-202 Filter For CFD

21 REPLACEMENT BLADDERS FOR ALL STANDARD SIZE ATL FUEL CELLS BLADDERS INCLUDE: All Replacement Bladders Include Safety Foam Baffling, Nut-Ring & Gasket. Super CELL 600 Super CELL 500 Super CELL Super CELL BANTAM Super CELL 100 SPORTS & SAVER CELL FT 3.5 FT 5 FT 3.5 FT 3.5 FT 3 FT 3 FT 3 Notes: SPECIAL NOTE REGARDING REPLACEMENT BLADDERS All Part Numbers in RED are SPECIAL ORDER Items. Please Call for Pricing. Fuel Bladder Compatibility: Cell Size ALL FUELS See Page 6 Super 600 Hydrocarbon Fuels with MAX 15% Ethanol Content Super 500 Hydrocarbon Fuels with MAX 15% Ethanol Content Super 300 Hydrocarbon Fuels with MAX 15% Ethanol Content Super 200 Hydrocarbon Fuels with MAX 15% Ethanol Content BANTAM Hydrocarbon Fuels with MAX 15% Ethanol Content Super 100 ALL FUELS See Page 12 Sports & Saver Cell 5 FB605 FB505 FB305 FB205 BB105 FB105 MB105 8 FB608 FB508 FB308 FB208 BB108 FB108 MB FB610 FB510 FB310 FB210 BB110 FB110 MB FB612 FB512 FB312 FB212 BB112 FB112 MB FB615 FB515 FB315 N/A BB115 FB115 MB115 15B FB615B FB515B FB315B FB215B BB115B FB115B N/A 17 FB617 FB517 FB317 FB217 BB117 FB117 N/A NASCAR (No Surge) 18 N/A FB518 N/A N/A N/A N/A N/A NASCAR (2 Door Surge) 18-1 N/A FB518-1 N/A N/A N/A N/A N/A NASCAR (3 Door Surge) 18-2 N/A FB518-2 N/A N/A N/A N/A N/A NASCAR (2 Door Left) 18-1L N/A FB518-1L N/A N/A N/A N/A N/A 18D FB618D FB518D FB318D FB218D BB118D FB118D N/A MRS Modified 18M FB618M FB518M FB318M FB218M BB118M FB118M N/A Wedge Style 18W FB618W FB518W FB318W FB218W BB118W FB118W N/A 22A FB622A FB522A FB322A FB222A BB122A FB122A MB122A 22B FB622B FB522B FB322B FB222B BB122B FB122B MB122B 22C FB622C FB522C FB322C FB222C BB122C FB122C MB122C 22D FB622D FB522D FB322D FB222D BB122D FB122D N/A 2 Door Surge (Oval Track) 22D-1 FB622D-1 FB522D-1 FB322D-1 FB222D-1 BB122D-1 FB122D-1 N/A 3 Door Surge (Road Race) 22D-2 FB622D-2 FB522D-2 FB322D-2 FB222D-2 BB122D-2 FB122D-2 N/A 22E FB622E FB522E FB322E FB222E BB122E FB122E N/A 22F FB622F FB522F FB322F FB222F BB122F FB122F N/A 22H FB622H FB522H FB322H FB222H BB122H FB122H N/A Wedge Style 22W FB622W FB522W FB322W FB222W BB122W FB122W N/A 24A FB624A FB524A FB324A FB224A BB124A FB124A N/A N.E. DIRT Modified 24B FB624B FB524B FB324B FB224B BB124B FB124B N/A Troyer DIRT Modified 24M FB624M FB524M FB324M FB224M BB124M FB124M N/A 26A FB626A FB526A FB326A FB226A BB126A FB126A MB126A 26B FB626B FB526B FB326B FB226B BB126B FB126B MB126B 26C FB626C FB526C FB326C FB226C BB126C FB126C MB126C Dirt Late Model 28-LM FB628LM FB528LM FB328LM FB228LM BB128LM FB128LM MB128LM 29 FB629 FB529 FB329 FB229 BB129 FB129 N/A 32A FB632A FB532A FB332A FB232A BB132A FB132A MB132A 32B FB632B FB532B FB332B FB232B BB132B FB132B MB132B 32C FB632C FB532C FB332C FB232C BB132C FB132C MB132C 32D FB632D FB532D FB332D FB232D BB132D FB132D MB132D 44 FB644 FB544 FB344 FB244 BB144 FB144 MB144 REPLACEMENT BLADDERS 21

22 REPLACEMENT FOAM & CANS FOR ALL SERIES OF ATL FUEL CELLS Notes: Cell Size SF103 Yellow Foam (Gas up to E85) SF110 Grey Foam (100% Alky) SF112 NASCAR Large Pore Foam Powder Coated Steel Container Aluminum Container Racell 3R BF603R BF903R Racell 5R BF605R BF905R BF605 BF905 - MC605 AC605 8 BF608 BF908 - MC608 AC608 Well Cell 8W BF608W BF908W BF610 BF910 - MC610 AC610 SAFETY FOAM FAQs: All Foam (SF103, SF110, SF112) Can Also be Purchased in Random Blocks, Sold by the Cubic Foot. EXPLOSION SUPPRESSION GASOLINE FOAM SF103 Gas ONLY up to E-85* 12 BF612 BF912 - MC612 AC612 Well Cell 12W BF612W BF912W BF615 BF915 - MC615 AC615 15B BF615B BF915B - MC615B AC615B 17 BF617 BF917 - MC617 - NASCAR (No Surge) BF818 MC618 - NASCAR (2 Door Surge) BF818 MC618 - NASCAR (3 Door Surge) BF818 MC618 - NASCAR (2 Door Left) 180-1L - - BF818 MC618-18D BF618D - - MC618 - MRS Modified 18M BF618M AC618M Wedge Style 18W BF618W AC618W 22A BF622A BF922A - MC622A AC622A -SB Shoe-Box Alum. Can 22B* BF622B BF922B - MC622B AC622B AC622B-SB 22C BF622C BF922C - MC622C AC622C -EL (End-Load Can) 22D BF622D BF922D - 2 Door Surge (Oval Track) -EL (End-Load Can) 3 Door Surge (Road Race) -EL (End-Load Can) 22D-1 BF622D - BF822D 22D-2 BF622D - BF822D MC622D MC622D-EL MC622D MC622D-EL MC622D MC622D-EL AC622D 22E BF622E BF922E - MC622E AC622E 22F BF622F BF922F - MC622F - 22H BF622H BF922H - MC622H - Wedge Style 22W BF622W AC622W Shoe-Box Alum. Can 24A BF624A BF924A - - AC624A Shoe-Box Alum. Can 24B BF624B BF924B BF824B - AC624B 26A BF626A BF926A - MC626A AC626A 26B BF626B BF926B - MC626B AC626B - - GAS & ALCOHOL CONDUCTIVE FOAM SF110 Gas and M-100 & E-100* NASCAR -TYPE LARGE PORE FOAM FOR QUICK-REFUELING SF112 Gas ONLY up to E-15* *Although ATL Foam is Engineered to Last, High Alcohol Content in Today s Fuels (E15+) can Impact the Foam s Life Span. Inspect Quarterly & Drain Cell After Use. CONTAINER STYLES: Top Load Standard on Most Cells, Top Lid Unbolts Flange Load Bladder Install Through 6x10 Top Opening NASCAR Flange Load 18 Gauge with Handles REPLACEMENT FOAM & CANS 26C* BF626C BF926C - MC626C AC626C 28-LM BF628LM BF928LM - MC628LM AC628LM 29 BF629 BF929 - MC629 AC629 32A BF632A BF932A - MC632A MC632A 32B* BF632B BF932B - MC632B AC632B 32C* BF632C BF932C - MC632C AC632C 32D BF632D BF932D - MC632D AC632D 44 BF644 BF944 - MC644 AC644 * SPECIAL NOTE REGARDING CONTAINERS All Steel Containers are Powder Coated Red with the Exception of Replacement Steel Cans for Dirt Late Model Cells that are ALSO Available Powder Coated in White or Black. Please Specify by Adding Suffix -B (Black) or -W (White) to Part Number When Ordering. Ex. MC626C-LM-B 22 Vertical Edge Top Lid has 90 Edges on Left and Right Sides End Load Access Door Located On Right Hand Side Shoe-Box Lid Simply Lifts Off.

23 FILL PLATES REGULAR FILL AND QUICK REFUELING HARDWARE LEGEND Ω Ø Ÿ ß Gasket(s) Included Bolts & Washers Included Bolts, Nuts & Washers Included Bolts & Nuts Included Anodized Aluminum Alodined Aluminum REGULAR-FILL PLATE ASSEMBLIES ALUMINUM 6 x10 STEEL 6 x10 ALUMINUM 4 x6 NEW! Ω TF With (2) #6 Outlets TF With (2) #8 Outlets Flap Valve Ω TF With (2) #6 Outlets TF With (2) #8 Outlets Both Aluminum (TF600) & Steel (TF195) Plates Include: 2-1/4 O.D., 1-1/4 Tall Neck (2) #6, #8 or #10 Outlets (1) #6 Vent Valve Twist-Off Cap Flap Valve for Roll-Over Protection TF473 4 x 6 Alum. Plate with Twist-Off Cap 2-1/4 O.D. Neck Flap-Valve, #6 Outlet, #6 Vent Valve Ω TF497 Ω Ω 4 x 6 Alum. Plate with Flush Fill Cap 2 1/2 Sprint Style, #8 Return, #6 Vent Valve TF752 4 x 6 Aluminum Sprint Style Plate by Factory Kahne with (2) #6, (1) #8 Fittings, & Threaded Aluminum Cap with Vent Valve REMOTE & QUICK-FILL STYLE FILL PLATE ASSEMBLIES Paddle Valve Paddle Valve Paddle Valve Spring Loaded Paddle-Valve Ω ß TF703 Remote-Fill Paddle-Valve Assembly: Will Accept ATL Level Sender Probe 2-1/4 O.D. Fill (45 ), (1) #8 Out., (1) #6 Ret., (1) #6 Vent Check Valve Flapper Valve Ω ß TF525 Quick-Fill Paddle-Valve Assembly: Aluminum, Spring-Loaded Bullet Vent 2-1/4 O.D. Fill (45 ), 1-1/2 O.D. Bullet Vent, (2) #8 Outlets, (1) #6 Return, (1) #6 Dipstick NASCAR Approved BALL VALVE Ω TF702 Quick-Fill, Off-Set, Paddle-Valve Assembly: Aluminum, Spring-Loaded Bullet Vent 3 O.D. Paddle Ck Fill (22 ), 1-1/2 O.D. Vent Valve (90 ), (1) #8 Outlet Ω TAG OPTIONAL SFI 32.2 TF707 NASCAR Quick-Fill Spring-Loaded Paddle-Valve Assembly: Aluminum, Spring-Loaded Bullet Vent 2-1/2 O.D. Paddle Ck Fill (22 ), 1-1/2 O.D. Bullet Vent, (1) #10 Outlet 6 x10 ALUMINUM QUICK-FILL PLATES Ω ß NASCAR Approved TF A and TF193A-184A Quick-Fill Flapper Valve Assembly: 2-1/4 O.D. Fill (45 ), (2) #8 Out., (1) #6 Ret., (1) #6 Dipstick TF A - 1 O.D. Vent TF193A-184A - 1-1/2 O.D. Vent Ω ß TF500 Quick-Fill Ball Check Fill & Vent Assembly: 2-1/2 O.D. Ball Ck Fill, 1-1/2 O.D. Ball Vent, (1) #10 Outlet, 7 Deep Cage DRILLED & BLANK ALUMINUM PLATES Ω ß TF193 and TF193A 6 x10 Alum. Quick-Fill Plate 4-3/4 B.C., (2) #8 Out, (1) #6 Ret, (1) #6 Dipstick TF193-1 O.D. Vent TF193A - 1-1/2 O.D. Vent Ω TF624 6 x10 Alum. Quick-Fill Plate 4-3/4 B.C., 2-1/2 B.C., (1) #10 Outlet Ω ß TF464 6 x10 Alum. Quick-Fill Plate 4-3/4 B.C.,1-1/2 O.D. Bullet Vent, (1) #10 Outlet - Can be Drilled For Level Sender Unit TF357 Ω ß 6 x10 Aluminum Quick-Fill Plate Dual 2-1/4 Fill/Vent, #6 TF475 Discr. Breather, (1) #6 Return, (2) #8 Outlets FILL PLATES Ω ß Ω ß Ω ß 4.75 B.C. - Bolt Center TF259 Aluminum 6 x10 Plate 24 Bolt, Center Fill, Interior 4-3/4 B.C., 12 Bolt TF259-OS Aluminum 6 x10 Plate 24 Bolt, Off-Set Fill, Interior 4-3/4 B.C., 12 Bolt TF259-OS-LS Aluminum 6 x10 Plate 24 Bolt, Off-Set, Interior 4-3/4 B.C., 12 Bolt Accepts 2.13 B.C. Level Sender Ω ß TF110A 6 x10 Alum. Plate 24 Bolt, Blank Ω ß Ω ß Ω ß TF109 4 x 6 Alum. Plate 12 Bolt, Blank TF B.C. Plate 12 Bolt, Blank TF108 3 B.C. Plate 6 Bolt, Blank 23

24 NECKS, CAPS & VALVES FILL NECKS, REMOTE FILL CAPS & VENT VALVES HARDWARE LEGEND Ω Ø Ÿ ß Gasket(s) Included Bolts & Washers Included Bolts, Nuts & Washers Included Bolts & Nuts Included Anodized Aluminum Alodined Aluminum REGULAR FILL & QUICK-FILL NECKS CUSTOMIZE YOUR ATL 6 x10 FILL PLATE TF Ultra-Quick Fill Neck w/ Paddle Valve 4-3/4 B.C., 12 Hole (x2), 2-1/2 O.D. Fill, 22 TF Ultra-Quick Fill Neck w/ Paddle Valve 4-3/4 B.C., 12 Hole, 3 O.D. Fill, 45 ß TF Ultra-Quick Fill Neck w/ Paddle Valve 4-3/4 B.C., 12 Hole 2-1/4 O.D. Fill, 45 ß TF Ultra-Quick Fill Neck w/ Paddle Valve 4-3/4 B.C., 12 Hole 1-1/2 O.D. Fill, 45 ß TF Regular-Fill Neck w/cap & Paddle Valve 4-3/4 B.C., 12 Hole 2-1/4 O.D. Fill, Straight 1-1/2 Tall Ω ß Ω ß Ω ß Ω ß Ω ß Ω ß TF Quick Fill Neck w/ Paddle Valve 4-3/4 B.C., 12 Hole 2-1/4 O.D. Fill, Straight TF348 GT Vent Valve Flap Type Valve 4-3/4 B.C., 12 Hole 2-1/4 O.D. Fill, Straight TF183A Quick Fill Neck w/ Flapper-Valve 4-3/4 B.C., 12 Hole 2-1/4 O.D. Fill, Straight TF183S Regular-Fill Neck w/ Cap & Flapper-Valve 4-3/4 B.C., 12 Hole 2-1/4 O.D. Fill, 4 Tall Neck, Straight TF184A Quick Fill Neck w/ Flapper-Valve 4-3/4 B.C., 12 Hole 2-1/4 O.D. Fill, 45 TF184S Regular-Fill Neck w/ Cap & Flapper-Valve 4-3/4 B.C., 12 Hole 2-1/4 O.D. Fill, 45 FILL CAPS TF428 NECKS, CAPS & VALVES TF429 Remote Fill Cap Billet Aluminum Cap Assy w/ Stepped Neck Accepts 2 & 2-1/4 I.D. Hose, 2 Opening, 3 B.C. RF108 Recessed Classic Cap, Steel Fender Fill 2-1/4 Fill, 5 B.C. with 1/8 Drain Ÿ TF659 Flush Mount Cap Aluminum 2-1/2 Opening, 4-3/4 B.C. RF109 With NEW Easy Grip, Billet Cap (TF751) VENT CHECK VALVES TF683 TF257 TF210 TF350 TF350-8 TF475 TF683* 1-1/2 Spring Loaded Vent Valve 92, 2.5 B.C. Ω TF257 1 Vent Valve Assy, Ball Type, 3 B.C. Ω ß TF210 #6 (3/8 ) Roll-Over Vent Valve - Fits in Vent Hose TF350 #6 (3/8 ) Ball Type, Vent Check Valve TF350-8 #8 (1/2 ) Ball Type, Vent Check Valve TF475 #6 (3/8 ) Discriminator Valve (Float Type) * Mounts to TF624 Plate, NASCAR Ø Ω Ÿ NEW! TF742 TF427 Flush Mount Locking Cap Aluminum 3 Opening, 4 B.C. (2) Keys Included TF365 Flush Mount Cap Aircraft-Type (Poly) 3 Opening, 4-3/4 B.C. TF751 Easy Grip, Lightweight Billet Aluminum Cap Available for TF600, TF195 & TF473 Fill Plates TF570 TF339 Aluminum Mini Fill Neck w/ Screw Cap 2.18 B.C. Standard Caps Fits 2-1/4 Necks TF243 - Red TF244 - Chrome Paddle Valve Replacement Parts 12 Bolt Hole, 4.75 B.C. Patented Ÿ TF428 Aluminum Remote Funnel 2-1/4 O.D., 4 B.C. For Use with TF427 Cap NEW! REPLACEMENT PARTS TF564 ATL Flap-Valve Replacement Part Fits TF600, TF195, TF473 TF242V Viton Flapper Replacement Part Fits TF183, A, S TF184, A, S 24

25 PARTS & ACCESSORIES LEVEL SENDERS, GAUGES, HOSES & FUEL SYSTEM ACCESSORIES ATL FUEL LEVEL KITS CAPACITANCE-TYPE LEVEL SENDING KITS Fuel Level Kit Part # (Includes Gauge) You Cut to Length. Self-Calibrating. FOR GAS, DIESEL AND E10 ONLY 12 Volt Standard Fuel Level Probe Only # LENGTH Probe Length OHMs Empty OHMs Full Popular Uses KS220K-12 KS Std. ATL KS220K-24 KS Std. ATL KS220K-36 KS Custom KS220K-48 KS Custom N.A. KS / G.M. N.A. KS / VDO N.A. KS / G.M. N.A. KS / VDO ATL Fuel Level Probes can be installed in most Fuel Cells. When purchasing an ATL Fuel Probe separately, please contact an ATL Sales Engineer for the proper length & OHM range. Fuel Level KITS Include: Probe Gauge Hardware FLOAT-STYLE LEVEL SENDING KITS Fuel Level Kit Part # (Includes Gauge) Fixed Length (DO NOT CUT). Factory Calibrated. FOR GAS, DIESEL AND ALKY 12 Volt Standard Fuel Level Probe Only # Probe Length OHMs Empty LENGTH OHMs Full Popular Uses KS215K-8 KS Std. ATL KS215K-9 KS Std. ATL KS215K-10 KS Std. ATL KS215K-12 KS Std. ATL KS215K-13 KS Std. ATL KS215K-14 KS Std. ATL BOTH CAPACITANCE & FLOAT-STYLE UNITS: Voltage Input: 12V Standard. Additional Voltage Options Available. Custom Units Also Available with 0-5 Volt Output Range LIGHTED ATL FUEL GAUGE KS208 Lighted Fuel Gauge Ohm 2.25 Outside Diameter - Mounts in a Diam. Hole. Works with Capacitance Type or Float Style Probe 12 Volt HIGH/LOW INDICATORS KS109H High-Level Indicator Kit 12 Volt, LED KS109L Low-Level Indicator Kit 12 Volt, LED ASSORTED FLEX ELBOWS RF128 RF138 RF133 RF132 RE128 RF128 Elbow /4 i.d. RF138 Elbow Reducer /4 i.d. to 1-1/2 i.d. RF133 Black Elbow /8 i.d. RF132 Black Elbow /4 i.d. RE128 Vent Elbow 90 1 i.d. TF629 ATL DRYCELL DESICCANT DRIER Attaches to fuel cell vent hose and excludes moisture. A must for preventing phase separation in ethanol-oxygenated gasolines. Includes (2) additional 90 hose barbs (3/8 ) and (1) jar of replacement beads. DIMENSIONS: 5-1/2 Body, 7 Overall HEAVY DUTY GASKETS INDIVIDUAL GASKETS & KITS TF236 TF217-W TF147 TF217 ALL FUEL COMPATIBLE VD50 50mm.02 Gal. Ball VD70 70mm.05 Gal. Ball VD mm.14 Gal. Ball VD mm 0.5 Gal. Ball TF148 TF653 TF467 TF510 VOLUME DISPLACEMENT PRODUCTS GASOLINE OR E10 ONLY VD Gal. Bladder 7 x4 x4 VD Gal. Bladder 8 x8 x4 VD Gal. Bladder 10 x8 x6 VD Gal. Bladder 10 x10 x6 TF217-W 6 x 10 (Wide) 24 Bolt TF217-T 6 x 10 Thin 24 Bolt (Not Shown) TF217 6 x 10 Oval 24 Bolt TF236 4 x 6 Oval 12 Bolt TF /4 B.C. 12 Bolt TF148 3 B.C. 6 Bolt TF653 Vent Valve 2-1/2 B.C. 8 Bolt TF467 Level Probe 5 Bolt TF B.C. 6 Bolt VDM01 Mesh Sack for mm Volume Displacement Balls (Sold by Linear Foot) VDM02 Mesh Sack for 50-70mm Volume Displacement Balls (Sold by Linear Foot) INSTALL IN FUEL CELL TO REDUCE CAPACITY (NOMINAL SIZES) KS161 Seal Kit Gaskets, Seals, Flapper, Bolts & Washers. For TF193, A; 184, A, S; 183, A, S Fill Plates KS162 Seal Kit Gaskets, Seals & Flap Valve. For TF195 & TF600 Fill Plates DIP STICKS TF265 #6 Dipsick Kit Includes: - TF204 AN #6 Bulkhead - TF Dip Stick (You Cut to Length) TF627 AN #10 Alky-Tube Dip Stick Assembly FUEL FILL & VENT HOSE SOLD PER FOOT - SIZES BY I.D. RF103 RF118 RE213 RE155 RE214 RF131 RF102 RE162 RE140 RE /4 Reinforced Black Hose 2-1/4 O.D. Aluminum Tube 2 Corrugated Refueling Hose 2 Corrugated Vent Hose 1-1/2 Refueling Hose 2-1/2 Clear Hose 2-1/4 Clear Hose 1-1/2 Clear Vent Hose 1-1/4 Clear Vent Hose 1 Clear Vent Hose AN BULKHEAD FITTINGS TF204 AN #6 (3/8 ) Straight TF232 AN #8 (1/2 ) Straight TF170 AN #10 (5/8 ) Straight Includes Nuts and Washers Other Sizes Available, Please Inquire PARTS & ACCESSORIES 25

26 REFUELING EQUIPMENT DRY BREAKS, VENT VALVES & DUMP CANS RE156 DRY BREAK HANDLES FOR USE WITH RE105 & RE165 DUAL RED HEAD DRY BREAKS (FILL & VENT) RE159 FULLY COMPLIES WITH IMSA, FIA & THE UNITED SPORTSCAR RACING SERIES (FORMERLY ALMS & GRAND AM) REFUELING REGULATIONS! RE158 Dual Female Receptacle (4-1/2 Centers) with Mount Plate RE159 Dual Male Probe (4-1/2 Centers) with Handle RE156 Dual Female Receptacle (100mm Centers) with Mount Plate RE157 Dual Male Probe (100mm Centers) with Handle MALE REFUELING PROBES RE /4 Single RE /4 Duel RE /2 Single RE /2 Duel FEMALE REFUELING RECEPTACLES RE /4 Male Probe, Connects to Dump Can, Vent Bottle or Overhead Rig RE /2 Male Probe, Connects to Vent Bottle, Dump Can or Overhead Rig RE /4 Female Recept., Fender or Deck Mount With Plastic Bulb RE /4 Female Recept., Fender or Deck Mount With Aluminum Bulb RE /2 Female Recept., Fender or Deck Mount With Aluminum Bulb RE /4 Female Recept., Tank Mount, 9 Hole, 4 B.C. RE /4 Female Recept., Tank Mount, 12 Hole, 4-3/4 B.C. RE /2 Female Recept., Tank Mount, 5 Hole, 3-1/8 B.C. NEW! DUMP CANS & VENT/FILL BOTTLES ATL DISCRIMINATOR VENT VALVE RE185 ATL s unique see-thru vent valve automatically closes to prevent fuel loss during racing & refueling. Easily Tell if Cell is Completely Full with Fuel! Fits any vent hose up to 1-1/2 i.d. - For Use with Gasoline Up to E15 REFUELING EQUIPMENT Threaded End SAFELY & QUICKLY TRANSFER RESIDUAL POST-RACE FUEL FROM OVERHEAD RIGS, DUMP CANS & VENT BOTTLES - NO FUNNELS, NO SPILLS! EASILY THREADS INTO THE 2 BUNG ON ANY CONVENTIONAL 55, 30 OR 15 GAL. STEEL DRUM! RE182-DM 2-1/4 Drum-Break Female Receptacle, Compatible with RE105, RE157, RE159 RE164-DM 1-1/2 Drum-Break Female Receptacle, Compatible with RE165 RE103-2 ATL Super Trick Dump Can 11 Gal. Nom. Capacity RE169 ATL Vent/Fill Bottle 5 Gal./20 Ltr. Nom. with Safety Foam Baffling (Includes 45 Elbow) Add -S for Straight Elbow RE170 Replacement Cap with Lanyard and Retention Spring for RE169 DRYBREAK REBUILD KITS KS118 Kit for RE104 RE113 RE153 RE156* RE158* RE182 KS164 Kit for RE164 & RE166 RE176 Billet Aluminum Vent Line Valve with Heavy-Duty Spring Accepts 1 1/2 i.d. Hose FEMALE * (2) Kits Required BILLET VENT LINE VALVE MALE KS119 Kit for RE105,RE157* & RE159* KS165 Kit for RE165 26

27 IMPORTANT INFORMATION SAFETY & PERFORMANCE REMINDERS 1. To the best of ATL s knowledge, this catalog information is accurate and complete. However, you should always confirm all data and specifications directly with an ATL Sales Engineer before ordering, installing or using any product. Thank you. LEARN MORE ABOUT THE FIA S LABELING & HOLOGRAM POLICY 2. All hard rubber bladders experience minor swelling when subjected to gasoline and alcohol (usually 1% to 2% linear). Allow 2 weeks of fluid contact for bladder dimensions and capacity to stabilize in SP, SA, RA & Well Cell models. Except for ATL s FlouroCell, all soft rubber bladders are designed for one fuel only, either hydrocarbon gasoline or alcohol but NOT both. Never switch fuels or blend fuel additives unless expressly recommended by ATL. 3. Due to the elastomeric nature of fuel bladders, a certain amount of vapor permeation or diffusion will occur. Always allow generous ventilation around the cell and vehicle so as to preclude the accumulation of fuel vapors. 4. Fuel cells rely on deformability to ward off impact and vibration. Decreasing temperatures may limit pliability and thereby could reduce the cell s effectiveness. ATL s racing fuel cells perform best under normal competition environments of 30ºF to 140ºF (0ºC to 60ºC). 5. Major sanctioning bodies such as NASCAR, SCCA, FIA etc. have recognized that fuel cells are affected by ozone, ultraviolet, aging, and the chemical action of gasoline and racing fuels. Hence, a Five Year Legal Life Span has been set on all bladder tanks. The rubber bladder portion of your fuel cell system must be replaced within 5 years of its manufacture date. 6. Water vapor and direct sunlight (UV) exposure can adversely affect fuel bladders. Always install the bladder within a metal or composite enclosure and keep the system externally and internally free of water and water vapor. When storing a fuel cell, drain the bladder completely, dry it out, close off all ports, and keep it in a dark, warm dry area. 7. Standard fuel cell foam baffling (SF103) is resistant to hydrocarbon gasoline, Avgas, most racing gas and E15 intermittently. Alcohol and Nitro fuels are NOT compatible with this foam material. ATL offers a special foam baffling (SF110) which demonstrates better intermittent resistance to 100% ethanol or methanol in most cases. Alcohol-bearing fuels must be completely drained after each use to lessen foam softening. SF-112 Large Pore foam reduces clingage and enhances venting, but may decrease ignition suppression level compared to SF-103 and SF-110 foam baffling. Call ATL for details. On January 1st, 2013, the Fédération Internationale de l Automobile (FIA) implemented a mandatory labeling requirement for many safety products, including safety fuel cells. The process involves a new serial # label plus adhering a hologram to the fuel bladder which, if tampered with or removed in an attempt to transfer to another bladder, will change appearance. The FIA s goal is to uphold product safety standards by reducing the possibility of counterfeiting. All drivers and race teams competing in FIA sanctioned events worldwide are required to carry this new FIA hologram on their fuel cells. Please consult with a representative from your series sanctioning body if you are unsure whether this mandate applies to you. ATL complies with these new FIA regulations and offers fuel bladders with both the new FIA hologram as well as bladders with the traditional FIA markings. When ordering a new fuel cell from ATL, you MUST specify at time of purchase if your bladder requires the new FIA hologram. Under no circumstances will ATL supply holograms for post-sale application - all holograms MUST be factory adhered. Unfortunately, this new FIA label and extensive anti-fraud record keeping system comes at a price. ATL must purchase these holograms directly from the FIA and has to pass these additional fees on to its customers. For those who would like to purchase an ATL fuel cell with the new FIA hologram, the additional charges are stated in ATL s latest printed price sheet. If you have any questions about this new FIA labeling mandate, please contact an ATL Sales Engineer toll-free by dialing or You can also reach ATL via at atl@atlinc.com. We thank you for your cooperation and understanding. Hologram Label Hologram Label 8. Fuel cell capacities are expressed herein as nominal values. If precise fuel system volume is critical, ATL will gladly assist in the computations. 9. ATL produces fuel cells and bladder tanks for Aircraft, Race Cars, Street Cars, Boats, Military Vehicles, Off-Road Equipment and Space Craft. Each application requires a particular design not generally appropriate to other uses. Never use an ATL product for anything but its originally intended purpose unless otherwise approved by ATL in writing. When in doubt, call (USA) or (0) (UK). 10. Please be SURE to STUDY ATL s Product Safety Bulletin #DS-381 before installing or using any ATL product. REMEMBER, IMPROPER SELECTION, INSTALLATION OR USE CAN CAUSE PERSONAL INJURY, PROPERTY DAMAGE OR DEATH. Don t take unnecessary risks; call ATL FIRST and Race Safe! 11. ATL s instruction sheets, Product Safety Bulletins and other Tech- Support information are available 24/7 at click Literature > Bulletins. SUPER CELL 600 Series SUPER CELL 500 Series SUPER CELL 300 Series SUPER CELL 200 Series SUPER CELL 100 Series BANTAM Series ATL CUSTOM Fuel Bladders Aero Tec Laboratories Inc. SOFT RUBBER (FABRIC) BLADDERS, INCLUDING: HARD RUBBER (MOLDED) BLADDERS, INCLUDING: SPORTS CELL Series SAVER CELL Series RACELL Series ATL SAFETY BULLETINS & PRODUCT LITERATURE For a complete library of ATL safety bulletins, data-sheets and product literature, simply visit atlinc.com/terms.html 27 IMPORTANT INFORMATION

28 AERO TEC LABORATORIES INC FLEXIBLE LIQUID CONTAINMENT FOR BOTH ON & OFF THE TRACK... MARINE INDUSTRIAL AEROSPACE/UAV BULK STORAGE SUBSEA DEFENSE Explore ATL s Complete Product Line by Visiting atlinc.com AERO TEC LABORATORIES INC WORLD HEADQUARTERS 45 Spear Road Industrial Park Ramsey, New Jersey USA Toll Free: Tel: (00) Order Fax: Fax: atl@atlinc.com AERO TEC LABORATORIES LTD SERVING EUROPE & ASIA ATL Technology Centre Denbigh Road, Bletchley Milton Keynes MK1 1DF England Tel: Fax: atl@atlltd.com