3 MOTORSPORT CATALOG

Transcription

1 MOTORSPORT CATALOG 3

2 2 ENGINEERED TO WIN

3 3 DOMINATE THE TRACK. For over 60 years, Eibach has dedicated itself to building the finest suspension components in the world. These results are showcased every day in the demanding world of racing, from the legendary Formula 1 circuits and grueling Off-Road races around the world, to the high banked ovals of NASCAR and dirt tracks of America. From Europe s Monza, Silverstone, Nürburgring and LeMans, to Australia s V8 Supercar tracks and the circuits of Asia s CTCC. As the stakes in racing grow ever higher, competition gets even tougher. Precision, reliability and repeatability assume greater importance, as preparation for winning race efforts become more crucial than ever. Eibach suspension components, which ultimately determine handling, balance and overall performance, must be nothing less than perfect. They must be Engineered To Win. CONTENT Eibach Race Spring Systems Eibach Accessories Coilover Off-Road PRO-UTV Platinum Front Open Helix Conventional Front Platinum Modified Stock Car Max Load Platinum Rear Loaded Conventional Rear 6Th Coil Spring Pull Bar Spring Metric Coilover

4 4 EIBACH SPRINGS Quality Unsurpassed Performance Perfected Ultra-Lightweight for Reduced Unsprung Mass Maximum in Combination with Smallest s Exceptional Resistance and Durability Precision Tolerances The Tightest in the Industry Precision Planparallel and Square End Configurations Under Unloaded and Loaded Conditions to +/- 1 Degree Lowest Side Loads with Load Center Ideally Located Relative to Spring Axis Highest Linearity and Guaranteed Consistency Within 2% Of Advertised Each Spring Individually Tested and d Eibach Springs Lifetime Warranty Eibach produces the finest racecar springs in the world. Period. When other springs sag, or need frequent replacement, top race teams, from F1 to WRC, from Le Mans to NASCAR, inevitably turn to Eibach. And, also inevitably, wonder why they didn t choose Eibach in the first place. To produce springs with unparalleled precision and repeatability, Eibach uses the world s finest Hi- Ten spring steel, produced to exceedingly precise tolerances according to Eibach specs. We use world-renowned German CNC coilers, as well as many machines engineered and built specifically by Eibach. In short, we use state-of-theart technology, in every step of the manufacturing process. But it s not just about machines and technology: it s about people. Most notably, the Eibach Springmeisters, working at production plants in Germany and the USA: Talented, expert craftsmen, each committed to creating the finest race springs in the world.

5 5 EIBACH RACE SPRING SYSTEMS Eibach Double-Spring System Suspension tuning is a precise balance. On one hand, the spring system should be soft enough to absorb track irregularities assuring maximum adhesion, while on the other hand the spring system must be firm enough to reduce the body roll, squat, and dive of the vehicle during cornering, acceleration and braking. For optimum balance, Eibach has developed the ERS double-spring system. By combining Eibach Main, Tender and/ or Helper springs, the suspension engineer or weekend racer can create the perfect combination of spring rates for the ultimate suspension set-up. With our extensive range of motorsport spring sizes and rates our ERS double-spring system is unsurpassed in performance and flexibility. For Off-Road racing where extreme wheel travel is a must combining two different rate main springs gives you the softer rate required for small bumps and a stiffer final rate to prevent bottoming on the bigger bumps and jumps. Eibach Main And Tender System The Eibach Main and Tender spring concept provides a softer initial rate when both springs are compressed together, then delivers the desired firmer final rate once the tender spring closes completely. The Main spring has a linear-rate characteristic and determines the final rate of the system. The Tender springs are available in linear or progressive-rate (shown) and determine the initial rate of the spring-system. Eibach Main And Helper System A Helper spring is used to prevent the Main spring from becoming loose in the spring seat when the suspension is unloaded or at full droop. The Helper spring, unlike the Tender spring, has very little spring rate, and therefore has no effect on the suspension characteristics of the vehicle. Up to 2" (50mm) of spring-to-perch gap can be covered with the use of a Helper spring.

6 6 EIBACH ACCESSORIES SPRING BAGS Keep the Dirt Out Made from Lightweight Material Eliminates Mud Packing Coils Keeps Spring Adjuster and Damper Shaft Clean-Extends Damper Life Reinforced Wear Bars for Long Life Washable Material Easily Opened for Shock & Spring Adjustment Part Number Spring Spring Quantity SPRING BAGS (Nylon) inch mm inch mm Protective Spring Bags-Pair (Fits 1.88" I.D. Springs) ESB " - 12" Protective Spring Bags-Pair (Fits 2.25" I.D. Springs) ESB " - 12" Protective Spring Bags-Pair (Fits 2.50" I.D. Springs) ESB " - 10" ESB " - 12" ESB " - 14" ESB " - 16" Protective Spring Bags-Pair (Fits 2.50"-3.00" I.D. XT Barrel Springs) ESB " - 12" ESB " - 14" ESB " - 16" Protective Spring Bags-Pair (Fits 3.00" I.D. Springs) ESB " - 12" ESB " - 14" ESB " - 16" Protective Spring Bags-Pair (Fits 5.00" O.D. Springs) ESB " - 14" ESB " - 16" Protective Spring Bag (Fits Pull Bar Springs) ESB " 222 Protective Spring Bag (Fits 6th Coil Springs) ESB " 102 SPRING BAGS (Neoprene) Protective Neoprene Spring Bags-Pair (Fits 2.50" I.D. Springs) ESBN " - 20" ESBN " - 22" ESBN " - 24" ESBN " - 28" ESBN " - 32" Protective Neoprene Spring Bags-Pair (Fits 3.00" I.D. Springs) ESBN " - 22" ESBN " - 24"

7 7 EIBACH ACCESSORIES COIL SLEEVE Critical Spring Tuning Eliminate Frame Drag while using Softer Spring s Allows Critical Adjustability without Change Spring Stays Linear Durable Will Withstand 2500LBS of Load Includes Adhesive Strip to Stay in Place Part Number Quantity Spring Range Spring Wire Range Coil Sleeve inch mm inch mm inch mm Coil Sleeve (Fits 2.50" I.D. Springs) CS CS Coil Sleeve (Fits 5.00" O.D. Springs) CS5001 (NASCAR Approved) CS5001L CS5002 (NASCAR Approved) CS5002L SPRING LOCATORS Precision Fitment Lightweight and Durable Aluminum Design CNC Precision Machined for Accuracy Maintains Critical Spring Fitment Eliminates Spring Movement Part Number Quantity (Perch O.D.) Outside (Spring I.D.) inch mm inch mm Spring Locator (I.D = Perch / O.D. = Spring I.D.) ESL ESL ESL ESL ESL ESL ESL ESL

8 8 COUPLING SPACERS Coupling Spacers Connect Main and Tender (or Helper) Springs Coupling Spacers for our Most Popular ERS Doublespring Applications Lightweight and Durable Anodized Aluminum Design CNC Precision Machined for Accuracy Part Number Spring Range Quantity Coupling Spacer (ID locating main to helper/tender) inch mm SPACER SPACER SPACER SPACER New! SPACER SPRING PERCH ADAPTER 60mm to 2.50 inch Extend Your Range of Available Spring s Adapts 60mm to 2.50 inch ID SAE Springs Lightweight and Durable Anodized Aluminum Design CNC Precision Machined for Accuracy Part Number Spring Range Quantity Adapter inch mm ADAPTER (Perch Adapter 60mm to 2.50") 1 60 / / 64 TORSION RELEASE BEARING TRB Smoother Deflection Reduce Torsional Binding by Removing Friction During Deflection Smoother and More Consistent Spring Action Throughout the Entire Range of Deflection Allows For Easier And More Precise Ride Adjustment by Eliminating Spring Seat Friction Part Number Spring Range Quantity Torsion Release Bearing inch mm TRB TRB TRB TRB TRB

9 9 EIBACH ACCESSORIES BUMP SPRING Spring and Cap System Bump Tuning for Dirt or Pavement Applications Engineered for maximum travel and consistency in the most extreme conditions, the Eibach BUMP-SPRING System offers limitless tuning options for soft spring Dirt and Pavement Racers. Through on-track development, we ve engineered a spring and cap system light weight and compact enough to fit Pavement Series setups, with maximum amounts of linear travel needed for Dirt Series Racers. The Consistent performance of the Eibach BUMP-SPRING System translates to increased aero efficiency, maximum grip and superior control at the limit. Ultra-Lightweight for Reduced Unsprung Mass Maximum in All s Repeatable Performance and Sag Resistant Precision Fit Cap System for 1/2 inch or 5/8 inch Shaft Sizes Made By Eibach in the USA Part Number inch mm inch mm lbs/inch kg/mm N/mm inch mm inch mm lbs N lbs kgs Bump Spring New! , New! , New! , New! , New! , New! , ,010 4, New! , ,137 5, New! , ,218 5, New! , ,242 5, New! , ,248 5, Bump Spring Cap New! BSC New! BSC BUMP STOPS Secondary Spring Tuning Made From a Race-Proven Micro-Cellular Polyurethane Elastomer Tremendous Deflection Potential with Near-Zero Lateral Expansion Progressive Compression Characteristics Extensive Range of s and Dimensions for Maximum Tuning Flexibility Part Number Outside Quantity Bump Stop inch mm inch mm inch mm lbs/inch N/mm EBS , EBS , EBS , EBS , EBS , EBS , EBS EBS EBS EBS EBS EBS EBS EBS ,

10 10 COILOVER 1.63" I.D. (Quarter Midget) 3.50 (length in inches) , , , , , , , , , , , , , (length in inches) , , , , , , , , , , , , , , , , , Part Number inch mm inch mm lbs/inch kg/mm N/mm inch mm inch mm lbs N lbs kgs COILOVER 1.88" I.D. Part Number inch mm inch mm lbs/inch kg/mm N/mm inch mm inch mm lbs N lbs kgs 8.00 (length in inches) , , , , , , , ,063 4, ,181 5, ,281 5,

11 11 COILOVER 1.88" I.D ,346 5, ,421 6, ,484 6, (length in inches) , , , , , , , , , , , ,053 4, ,043 4, ,203 5, ,223 5, ,363 6, ,478 6, ,683 7, ,787 7, ,865 8, ,171 9, ,277 10, Helper (prevents main spring from becoming loose at full droop) HELPER Spacer (ID locating main to helper/tender coupling spacer) SPACER Torsion Release Bearing TRB Spring Spring Protective Spring Bags-Pair (Fits 1.88" I.D. Springs) Qty inch mm inch mm ESB " - 12" Part Number inch mm inch mm lbs/inch kg/mm N/mm inch mm inch mm lbs N lbs kgs COILOVER 2.00" I.D. Part Number inch mm inch mm lbs/inch kg/mm N/mm inch mm inch mm lbs N lbs kgs 4.00 (length in inches) , ,248 5, ,282 5, ,436 6, ,501 6, ,586 7, ,774 7, ,807 8, ,790 7,

12 12 COILOVER 2.00" I.D , ,969 8, , ,984 8, , ,165 9, , ,104 9, , ,283 10, , ,524 11, , ,784 12, , ,125 13, , ,165 14, , ,473 15, , ,521 15, , ,797 16, , ,067 18, , ,974 17, , ,511 20, , ,699 20, (length in inches) , ,082 4, ,147 5, ,240 5, ,378 6, ,472 6, ,583 7, ,740 7, ,836 8, ,932 8, ,909 8, ,956 8, ,255 10, , ,464 10, , ,481 11, , ,485 11, , ,672 11, , ,853 12, , ,063 13, , ,994 13, , ,122 13, , ,536 15, , ,667 16, , ,541 15, , ,843 17, , ,334 19, Helper (prevents main spring from becoming loose at full droop) HELPER Torsion Release Bearing TRB Part Number inch mm inch mm lbs/inch kg/mm N/mm inch mm inch mm lbs N lbs kgs

13 13 COILOVER 2.25" I.D (length in inches) ,081 4, ,168 5, ,260 5, ,529 6, ,745 7, ,772 7, ,799 8, ,010 8, , ,029 9, , ,109 9, , ,158 9, , ,208 9, , ,385 10, , ,372 10, , ,559 11, , ,535 11, , ,662 11, , ,115 13, , ,387 15, , ,482 15, , ,812 16, , ,810 16, , ,109 18, , ,092 18, , ,370 19, , ,647 20, , ,826 21, , ,990 22, (length in inches) ,068 4, ,213 5, ,212 5, ,284 5, ,456 6, ,481 6, ,585 7, ,699 7, ,697 7, ,806 8, ,796 7, ,894 8, ,989 8, ,044 9, ,269 10, ,230 9, ,316 10, ,421 10, ,371 10, , ,567 11, , ,616 11, , ,631 11, , ,746 12, , ,835 12, Part Number inch mm inch mm lbs/inch kg/mm N/mm inch mm inch mm lbs N lbs kgs

14 14 COILOVER 2.25" I.D , ,837 12, , ,050 13, , ,073 13, , ,052 13, , ,238 14, , ,204 14, , ,394 15, , ,491 15, , ,344 14, , ,539 15, , ,674 16, , ,595 15, , ,799 16, , ,008 17, , ,361 19, , ,797 21, , ,430 24, , ,124 27, , ,021 26, , ,434 28, , ,222 32, (length in inches) , , , , , , , ,135 5, ,114 4, ,273 5, ,290 5, ,424 6, ,601 7, New! ,633 7, ,770 7, ,784 7, ,799 8, ,944 8, ,952 8, ,076 9, ,075 9, ,193 9, ,267 10, ,532 11, ,640 11, ,720 12, ,767 12, , ,038 13, , ,099 13, , ,373 15, , ,648 16, , ,805 16, Part Number inch mm inch mm lbs/inch kg/mm N/mm inch mm inch mm lbs N lbs kgs

15 15 COILOVER 2.25" I.D , ,859 17, , ,990 17, , ,257 18, , ,585 20, , ,882 21, , ,092 22, (length in inches) , , ,126 5, ,199 5, ,299 5, ,315 5, ,513 6, ,581 7, ,642 7, ,680 7, ,845 8, ,885 8, ,927 8, ,083 9, ,106 9, ,257 10, ,400 10, ,536 11, ,687 11, ,809 12, ,926 13, ,213 14, , ,359 14, , ,710 16, (length in inches) , ,010 4, ,102 4, ,227 5, ,307 5, ,490 6, ,584 7, ,671 7, ,762 7, ,814 8, ,875 8, ,055 9, ,101 9, ,279 10, ,318 10, ,347 10, ,543 11, ,721 12, ,859 12, ,044 13, ,165 14, ,299 14, Part Number inch mm inch mm lbs/inch kg/mm N/mm inch mm inch mm lbs N lbs kgs

16 16 COILOVER 2.25" I.D ,424 15, , ,866 17, (length in inches) ,032 4, ,118 4, ,375 6, ,608 7, ,801 8, ,094 9, ,239 9, ,492 11, ,721 12, ,764 12, ,159 14, ,519 15, ,782 16, Tender/Linear , New! , , , New! , , Helper HELPER Spacer (ID locating main to helper/tender coupling spacer) SPACER Isolator (Delrin Seat Plate) ISOLATOR Torsion Release Bearing TRB Spring Spring Protective Spring Bags-Pair (Fits 2.25" I.D. Springs) Qty inch mm inch mm ESB " - 12" Part Number inch mm inch mm lbs/inch kg/mm N/mm inch mm inch mm lbs N lbs kgs

17 17 XT BARREL 2.50" I.D. Extreme 4.00 (length in inches) XT Barrel (Extreme ) New! , New! ,001 4, New! ,173 5, New! ,435 6, New! ,622 7, New! ,860 8, (length in inches) XT Barrel (Extreme ) New! , New! ,001 4, New! ,221 5, New! ,436 6, New! ,441 6, New! ,716 7, New! ,882 8, New! ,042 9, New! ,184 9, New! ,334 10, New! ,445 10, New! ,562 11, New! ,672 11, New! ,751 12, New! ,005 13, (length in inches) XT Barrel (Extreme ) New! ,983 8, New! ,200 9, New! ,333 10, New! ,512 11, New! ,719 12, New! ,890 12, (length in inches) XT Barrel (Extreme ) New! ,217 5, New! ,347 5, New! ,470 6, New! ,604 7, New! ,805 8, New! ,056 9, New! ,276 10, New! ,524 11, New! ,683 11, New! ,891 12, New! ,027 13, New! ,326 14, (length in inches) XT Barrel (Extreme ) / / ,568 6, / / ,742 7, / / ,894 8, / / ,050 9, / / ,184 9, / / ,311 10, / / ,432 10, / / ,546 11, / / ,660 11, / / ,728 12, Part Number inch mm inch mm lbs/inch kg/mm N/mm inch mm inch mm lbs N lbs kgs

18 18 XT BARREL 2.50" I.D. Extreme / / ,879 12, / / ,992 13, / / ,260 14, / / ,334 14, / / ,395 15, / / ,396 15, (length in inches) XT Barrel (Extreme ) / / , / / ,146 5, / / ,344 5, / / ,524 6, / / ,549 6, / / ,744 7, / / ,888 8, / / ,085 9, / / ,282 10, / / ,463 10, / / ,519 11, / / ,794 12, / / ,934 13, / / ,077 13, / / ,213 14, (length in inches) XT Barrel (Extreme ) / / ,065 4, / / ,313 5, / / ,541 6, / / ,749 7, / / ,807 8, / / ,004 8, / / ,953 8, / / ,405 10, New! / / ,512 11, New! / / ,713 12, (length in inches) XT Barrel (Extreme ) / / ,225 5, / / ,513 6, / / ,619 7, / / ,022 8, / / ,142 9, / / ,425 10, / / ,682 11, Torsion Release Bearing TRB Spring Spring Protective Spring Bags-Pair (Fits 2.50 I.D. XT Barrel Springs) Qty inch mm inch mm ESB " - 12" ESB ESB Part Number inch mm inch mm lbs/inch kg/mm N/mm inch mm inch mm lbs N lbs kgs

19 19 COILOVER 2.50" I.D (length in inches) ,439 6, ,624 7, ,809 8, ,960 8, ,990 8, ,149 9, ,397 10, ,510 11, ,634 11, ,732 12, ,820 12, ,924 13, New! ,896 12, , ,076 13, , ,295 14, , ,318 14, , ,562 15, , ,634 16, , ,110 18, (length in inches) ,226 5, ,356 6, ,449 6, ,525 6, ,609 7, ,675 7, ,884 8, ,096 9, ,161 9, ,348 10, ,504 11, ,660 11, ,813 12, ,918 12, ,142 13, , ,481 15, , ,626 16, (length in inches) , , ,065 4, ,191 5, ,291 5, ,406 6, ,513 6, ,609 7, ,709 7, ,787 7, ,968 8, ,053 9, ,122 9, ,184 9, ,358 10, Part Number inch mm inch mm lbs/inch kg/mm N/mm inch mm inch mm lbs N lbs kgs

20 20 COILOVER 2.50" I.D ,402 10, ,437 10, ,646 11, ,838 12, ,043 13, ,209 14, ,368 14, ,348 14, ,520 15, ,665 16, ,776 16, , ,877 17, , ,033 17, , ,317 19, , ,437 19, (length in inches) (Silver) S , S ,065 4, S ,291 5, S ,513 6, S ,709 7, S ,968 8, S ,358 10, S ,437 10, S ,646 11, (length in inches) , , ,035 4, ,169 5, ,323 5, ,487 6, ,569 6, ,715 7, ,844 8, ,971 8, ,092 9, ,208 9, ,302 10, ,399 10, ,630 11, ,711 12, ,786 12, ,840 12, ,061 13, ,121 13, ,158 14, ,401 15, ,644 16, ,860 17, ,074 18, (length in inches) (Silver) S , S , Part Number inch mm inch mm lbs/inch kg/mm N/mm inch mm inch mm lbs N lbs kgs

21 21 COILOVER 2.50" I.D S ,169 5, S ,323 5, S ,487 6, S ,569 6, S ,715 7, S ,844 8, S ,971 8, S ,092 9, S ,208 9, S ,302 10, S ,399 10, S ,630 11, S ,786 12, S ,061 13, S ,158 14, S ,401 15, S ,644 16, S ,860 17, S ,074 18, (length in inches) , , , , ,001 4, ,007 4, , ,118 4, ,171 5, ,330 5, ,372 6, ,488 6, ,585 7, ,696 7, ,893 8, ,067 9, ,112 9, ,270 10, ,408 10, ,542 11, ,670 11, ,794 12, ,052 13, ,162 14, ,334 14, ,706 16, ,985 17, ,864 21, (length in inches) (Silver) S , S ,007 4, S ,171 5, S ,372 6, S ,585 7, Part Number inch mm inch mm lbs/inch kg/mm N/mm inch mm inch mm lbs N lbs kgs

22 22 COILOVER 2.50" I.D S ,696 7, S ,893 8, S ,067 9, S ,112 9, S ,270 10, S ,408 10, S ,542 11, S ,670 11, S ,794 12, S ,052 13, S ,162 14, S ,252 14, S ,334 14, S ,390 15, S ,706 16, S ,025 17, S ,307 19, S ,586 20, S ,864 21, S ,041 22, (length in inches) , , , , , ,134 5, ,190 5, ,326 5, ,391 6, ,518 6, ,568 6, ,709 7, ,817 8, ,953 8, ,170 9, ,258 10, ,458 10, ,633 11, ,812 12, ,123 13, ,385 15, ,830 17, (length in inches) (Silver) S , S ,125 5, S ,391 6, S ,568 6, S ,705 7, S ,817 8, S ,953 8, S ,170 9, S ,258 10, S ,458 10, Part Number inch mm inch mm lbs/inch kg/mm N/mm inch mm inch mm lbs N lbs kgs

23 23 COILOVER 2.50" I.D S ,812 12, S ,123 13, S ,385 15, S ,830 17, S ,026 17, S ,413 19, S ,538 20, (length in inches) (Silver) S ,110 4, S ,537 6, S ,023 8, S ,433 10, S ,757 12, S ,173 14, S ,533 15, S ,861 17, S ,117 18, S ,353 19, S ,763 21, S ,200 23, S ,289 23, S ,669 25, Tender/Linear , , , , , , , , , , , Tender/Progressive / / / ,513 6, / / / , / / / , / / / , / / / , / / / ,297 5, Helper HELPER HELPER250T Spacer (ID locating main to helper/tender coupling spacer) SPACER Adapter ADAPTER / /2.50 Isolator (Delrin Seat Plate) ISOLATOR Torsion Release Bearing TRB Part Number inch mm inch mm lbs/inch kg/mm N/mm inch mm inch mm lbs N lbs kgs

24 24 COILOVER 2.50" I.D. Spring Range Spring Wire Range Coil Sleeve Coil Sleeve (Fits 2.50 I.D. Springs) Qty inch mm inch mm inch mm CS CS Spring Spring Protective Spring Bags-Pair (Fits 2.50 I.D. Springs) Qty inch mm inch mm ESB ESB ESB ESB Protective Neoprene Spring Bags-Pair (Fits 2.50 I.D. Springs) ESBN ESBN ESBN ESBN ESBN COILOVER 3.00" I.D (Off-Road) Part Number inch mm inch mm lbs/inch kg/mm N/mm inch mm inch mm lbs N lbs kgs 4.00 (length in inches) (Silver) S , S , S , S , S ,111 4, S ,272 5, S ,272 5, S ,859 8, (length in inches) (Silver) S , S , S , S ,039 4, S ,219 5, S ,389 6, S ,514 6, S ,712 7, S ,820 8, S ,002 8, S ,155 9, (length in inches) (Silver) S , S ,107 3, S ,128 5, S ,345 5, S ,604 7, S ,814 8, S ,870 8, S ,179 9,

25 25 COILOVER 3.00" I.D. (Off-Road) S ,441 10, S ,788 12, (length in inches) (Silver) S , S ,063 4, S ,382 6, S ,662 7, S ,008 8, New! S ,164 9, New! S ,414 10, (length in inches) (Silver) S , S ,079 4, S ,319 5, S ,448 6, S ,664 7, S ,815 8, S ,014 8, S ,122 9, S ,305 10, S ,486 11, S ,657 11, S ,815 12, S ,970 13, S ,254 14, S ,503 15, S ,069 18, (length in inches) (Silver) New! S ,035 4, S ,254 5, S ,464 6, S ,673 7, S ,855 8, S ,103 9, S ,251 10, S ,484 11, S ,581 11, S ,843 12, S ,990 13, S ,362 14, S ,682 16, S ,979 17, S ,200 18, S ,638 20, S ,813 21, S ,198 23, (length in inches) (Silver) S , S ,155 5, S ,439 6, S ,638 7, S ,869 8, S ,090 9, S ,368 10, Part Number inch mm inch mm lbs/inch kg/mm N/mm inch mm inch mm lbs N lbs kgs

26 26 COILOVER 3.00 I.D. (Off-Road) S ,546 11, S ,931 13, S ,342 14, S ,754 16, S ,130 18, S ,241 18, S ,629 20, S ,978 22, S ,575 24, S ,274 27, (length in inches) (Silver) S ,330 10, S ,242 14, S ,100 18, S ,415 19, S ,780 21, S ,231 23, S ,496 24, S ,873 26, S ,227 27, S ,600 29, Tender/Linear Helper HELPER New!HELPER300T Spacer (ID locating main to helper/tender coupling spacer) SPACER Isolator (Delrin Seat Plate) New!ISOLATOR Torsion Release Bearing TRB Spring Range Spring Wire Range Coil Sleeve Coil Sleeve (Fits 3.00 I.D. Springs) Qty inch mm inch mm inch mm CS CS Spring Spring Protective Spring Bags-Pair (Fits 3.00 I.D. Springs) Qty inch mm inch mm ESB " - 12" ESB " - 14" ESB " - 16" Protective Neoprene Spring Bags-Pair (Fits 3.00 I.D. Springs) ESBN " - 22" ESBN " - 24" Part Number inch mm inch mm lbs/inch kg/mm N/mm inch mm inch mm lbs N lbs kgs

27 27 COILOVER 3.75" I.D. (Off-Road) 8.00 (length in inches) (Silver) New! S ,175 5, New! S ,364 6, New! S ,676 7, (length in inches) (Silver) New! S ,762 7, S ,762 7, S ,043 9, S ,356 10, S ,645 11, S ,923 13, S ,169 14, (length in inches) (Silver) S ,725 7, S ,111 9, S ,447 10, S ,741 12, S ,087 13, S ,716 16, S ,186 18, S ,927 21, (length in inches) (Silver) New! S ,370 10, S ,787 12, S ,135 13, S ,541 15, S ,925 17, (length in inches) (Silver) New! S ,644 11, New! S ,060 13, New! S ,505 15, New! S ,893 17, (length in inches) (Silver) S ,499 28, S ,741 29, S ,239 32, (length in inches) (Silver) S ,792 16, S ,716 20, S ,471 24, S ,307 28, S ,654 29, S ,831 30, S ,973 31, S ,197 32, (length in inches) (Silver) S ,107 18, S ,135 22, S ,637 25, S ,964 26, S ,373 28, S ,601 29, S ,638 33, S ,136 36, Part Number inch mm inch mm lbs/inch kg/mm N/mm inch mm inch mm lbs N lbs kgs

28 28 COILOVER 3.75" I.D. (Off-Road) (length in inches) (Silver) S ,388 19, S ,977 22, S ,411 24, S ,591 24, S ,419 28, S ,652 29, S ,137 31, S ,380 32, S ,995 35, S ,131 40, (length in inches) (Silver) S ,267 10, S ,504 11, Helper HELPER , Spacer (ID locating main to helper/tender coupling spacer) New!SPACER Part Number inch mm inch mm lbs/inch kg/mm N/mm inch mm inch mm lbs N lbs kgs PRO-UTV Performance Spring Systems All PRO-UTV Systems Include Springs, Sliders, Stop Rings* and Setup Instructions for Easy Bolt-on Installation Engineered and Tested FOR Drivers BY Drivers for Maximum Performance on Any Terrain Race Proven Durability, Quality and Repeatability You Can Rely On Made By Eibach in the USA Lifetime Warranty PRO-UTV Stage 1 Our Stage 1 System, for 2 or 4 seat vehicles, replaces the factory springs with our race proven Eibach dual-springs to deliver a durable, repeatable performance and a sag free ride. PRO-UTV Stage 2 Perfect for the weekend warrior! Designed for 2 or 4 seat vehicles, this system delivers the confidence and control you need to keep the hammer down and lead the pack. An adjustable lockout collar is included to allow fine tuning of the transition point of the dual spring setup for a smooth ride over rough terrain and the higher additional rate to prevent bottoming in the g-outs. You will immediately notice better turn-in response and stay hooked-up to power out of the turns. PRO-UTV Stage 3 Engineered for the 4-seat vehicles with higher loads and additional passengers. This system offers a slightly more aggressive spring rate to maintain the balance you need at the limit. An adjustable lockout collar is included to allow fine tuning of the transition point of the dual spring setup for a plush ride over rough terrain and the higher additional rate to prevent bottoming. Perfect for vehicles loaded with spares, tools or passengers. Don t have the factory coilovers? Not a problem. Our line of ERO parts and accessories offer thousands of rates, lengths and combinations to fine tune your new setup. *Stop Rings not included in Stage 1

29 29 PRO-UTV Performance Spring Systems Polaris Razor XP 1000 EPS, 1000cc (2014-UP)* New! E (Stage 1 - OE Replacement) S , S ,382 6, S , S ,330 10, New! E (Stage 2-2 Passengers w/o Load) S , S ,662 7, S ,063 4, S ,242 14, New! Polaris Razor XP EPS, 1000cc (2014-UP)* E (Stage 1 - OE Replacement) S ,219 5, S ,164 9, S , S ,242 14, New! E (Stage 2-4 Passengers w/o Load) S ,389 6, S ,164 9, S ,107 3, S ,242 14, New! E (Stage 3-4 Passengers w/load) S ,389 6, S ,414 10, S ,345 5, S ,242 14, *For Walker Evans equipped vehicles only. Part Number inch mm inch mm lbs/inch kg/mm N/mm inch mm inch mm lbs N lbs kgs PRO-UTV Suspension Stabilizer Bar Take your UTV to the next level with our PRO-UTV Performance Stabilizer Bar! Reduced Body Roll Through Increased Design Stiffness Over Stock Sway Bar Engineered to Perfectly Complement Each PRO-UTV Spring System Three Way Adjustability to Fine Tune to Driver Preference Easy Direct Replacement Installation Made by Eibach in the USA Size PRO-UTV Suspension Stabilizer Bar inch mm lbs/inch N/mm lbs/inch N/mm lbs/inch N/mm Polaris Razor XP 1000 EPS, 1000cc (2014-UP) New!E (Rear Bar & End Link Kit) Tubular New!E (Rear Bar only) Tubular Polaris Razor XP EPS, 1000cc (2014-UP) New!E (Rear Bar & End Link Kit) Tubular New!E (Rear Bar only) Tubular PRO-UTV Suspension Accessories New!LOCKOUT300 (Lockout Ring New!SLIDER300 New!UEL1 (End Link Kit)

30 30 PLATINUM FRONT Coil lbs 1200lbs & 1" 1200lbs 1500lbs & 1" 1500lbs to Part Number inch mm inch mm lbs/inch inch lbs/inch inch inch inch lbs kgs 8.75 (length in inches) EF EF EF EF EF OPEN HELIX Front Springs These Open Helix Springs were produced to achieve the largest end gap possible on the open end of the spring (Bottom). Graph,, and data are available upon request. Outside Wire Part Number inch mm inch mm inch lbs kgs 7.25 (length in inches) H H (length in inches) H H H H H H H CONVENTIONAL Front Springs Outside 8.75 (length in inches) " O.D ,815 8, ,933 8, ,054 9, ,175 9, ,452 10, ,462 10, ,640 11, ,641 11, ,703 12, ,031 13, ,961 13, ,145 13, ,184 14, ,401 15, ,429 15, ,574 15, ,669 16, ,941 17, Part Number inch mm inch mm lbs/inch N/mm inch mm inch mm lbs N lbs kgs

31 31 CONVENTIONAL Front Springs Outside ,961 17, ,184 18, ,315 19, ,359 19, ,769 21, ,523 20, ,601 20, ,726 21, ,849 21, , ,923 21, , ,046 22, , ,260 23, , ,338 23, , ,855 21, , ,893 26, , ,812 25, , ,065 26, , ,104 27, , ,153 27, , ,338 28, , ,807 30, , ,808 30, , ,741 29, , ,853 30, , ,541 33, , ,466 33, , ,461 37, , ,518 33, , ,995 35, , ,048 35, , ,381 41, , ,496 37, , ,845 39, , ,185 40, , ,636 42, , ,801 43, , ,132 45, , ,259 45, , ,670 47, , ,080 49, , ,270 50, Part Number inch mm inch mm lbs/inch N/mm inch mm inch mm lbs N lbs kgs

32 32 PLATINUM MODIFIED Front Springs Outside Platinum Front Short Track New!PF ,180 14, New!PF ,280 14, New!PF ,438 15, New!PF ,679 16, New!PF ,539 15, Part Number inch mm inch mm lbs/inch N/mm inch mm inch mm lbs N lbs kgs CONVENTIONAL Front Springs Outside 9.50 (length in inches) " O.D ,391 6, ,730 7, ,990 8, ,302 10, ,363 10, ,565 11, ,678 11, ,682 11, ,912 12, ,861 12, ,220 14, ,373 15, ,392 15, ,541 15, ,651 16, ,797 16, ,846 17, ,895 17, ,128 18, ,241 18, ,355 19, ,377 19, ,760 21, ,704 20, , ,852 21, , ,205 23, , ,382 23, , ,340 23, , ,750 25, , ,413 24, , ,259 27, , ,218 27, , ,289 27, Part Number inch mm inch mm lbs/inch N/mm inch mm inch mm lbs N lbs kgs

33 33 CONVENTIONAL Front Springs Outside 9.50 (length in inches) " O.D ,068 9, ,156 9, ,247 9, ,449 10, ,452 10, ,707 12, ,880 12, ,058 13, ,117 13, ,262 14, ,281 14, ,397 15, ,473 15, ,542 15, ,726 16, ,786 16, ,932 17, ,068 18, ,292 19, ,511 20, ,765 21, ,616 20, ,734 21, , ,974 22, , ,896 21, , ,889 26, , ,671 25, , ,494 24, , ,920 26, , ,634 25, , ,069 26, , ,463 28, , ,102 27, , ,560 29, (length in inches) " O.D ,273 10, ,446 10, ,617 11, ,764 12, ,928 13, Part Number inch mm inch mm lbs/inch N/mm inch mm inch mm lbs N lbs kgs

34 34 STOCK CAR Front Springs Outside Part Number inch mm inch mm lbs/inch N/mm inch mm inch mm lbs N lbs kgs (length in inches) " O.D. New! ,954 22, New! ,154 22, New! , ,549 24, New! , ,037 26, New! , ,324 28, New! , ,258 6,562 29, Coil Sleeve (Fits 5.00" O.D. Springs) Spring Range Spring Wire Range Coil Sleeve inch mm inch mm inch mm CS5001 (NASCAR Approved) CS5001L CS5002 (NASCAR Approved) CS5002L MAX LOAD REAR 5.00" I.D These springs are designed to handle a certain Maximum Load. If this Maximum Load is exceeded, the spring will lose free length. Outside Design MAX Load Part Number inch mm inch mm lbs/inch N/mm lbs N lbs kgs Max Load Rear 5.00 O.D. ML K ,000 8, ML K ,200 9, ML K ,500 11, ML K ,700 12, ML K ,200 14, ML K ,700 12, ML K ,300 14, ML K ,100 13, ML K ,000 17, ML K ,500 20, ML K ,500 20, ML K ,400 19, ML K ,300 19, ML K ,400 19, ML K ,500 20, ML K , ,900 21, ML K , ,600 24,

35 35 PLATINUM Rear Springs Outside Rear Platinum Springs " O.D. ER ,015 4, ER ,142 5, ER ,308 5, ER ,616 7, ER ,868 8, ER ,132 9, ER ,379 10, New!ER ,636 11, ER ,761 7, ER ,023 8, ER ,291 10, ER ,457 10, ER ,678 11, ER ,154 5, ER ,404 6, ER ,667 7, ER ,747 12, ER ,156 14, ER ,578 15, ER ,704 16, ER ,322 14, ER ,790 12, ER ,006 13, ER ,867 17, ER ,145 18, ER ,622 7, ER ,845 8, ER ,090 9, ER ,245 9, ER ,475 11, ER ,681 11, ER ,234 14, ER ,724 12, ER ,911 12, ER ,090 13, ER ,152 14, ER ,477 15, ER ,645 16, ER ,776 16, ER ,030 17, ER ,116 18, ER ,373 19, ER ,740 21, ER ,797 21, ER ,949 22, ER ,160 22, ER ,368 23, ER ,746 25, ER ,823 25, ER ,071 27, ER , ,580 29, ER ,732 16, ER ,990 17, Part Number inch mm inch mm lbs/inch N/mm inch mm inch mm lbs N lbs kgs

36 36 PLATINUM Rear Springs Outside ER ,335 19, ER , ER ,119 4, ER ,309 5, Part Number inch mm inch mm lbs/inch N/mm inch mm inch mm lbs N lbs kgs LOADED HEIGHT Rear Springs Outside Loaded Rear (NASCAR 10.00") LH ,462 6, LH ,687 7, LH ,817 8, LH ,987 8, LH ,155 9, LH ,323 10, LH ,306 10, LH ,440 10, LH ,765 12, LH ,900 12, LH ,021 13, LH ,149 14, LH ,327 14, LH ,369 14, LH ,465 15, LH ,558 15, LH ,693 16, LH ,722 16, LH ,109 18, LH ,173 18, LH ,230 18, LH ,328 19, LH ,367 19, LH ,808 21, LH ,259 18, LH ,970 22, LH ,909 21, LH ,216 23, LH ,448 24, LH ,528 24, LH , ,527 24, LH , ,878 26, LH , ,464 28, LH , ,659 29, LH , ,181 31, Part Number inch mm inch mm lbs/inch N/mm inch mm inch mm lbs N lbs kgs

37 37 CONVENTIONAL Rear Springs Outside (length in inches) " O.D ,073 4, ,268 5, ,447 6, ,621 7, ,763 7, ,957 8, ,150 9, ,159 9, ,493 11, ,574 11, ,622 11, ,867 12, ,018 13, ,249 14, ,486 15, ,690 16, ,871 17, ,104 18, ,420 19, ,736 21, ,988 22, ,267 23, ,435 24, (length in inches) " O.D ,262 5, ,492 6, ,663 7, ,758 7, ,907 8, ,092 9, ,248 10, ,371 10, ,671 11, ,869 12, ,066 13, ,258 14, ,434 15, ,757 16, ,036 17, ,248 18, ,458 19, ,186 23, (length in inches) " O.D ,363 6, ,670 7, ,642 7, ,908 8, ,128 9, ,333 10, ,593 11, ,846 12, ,994 13, Part Number inch mm inch mm lbs/inch N/mm inch mm inch mm lbs N lbs kgs

38 38 CONVENTIONAL Rear Springs Part Number inch mm (length in inches) " O.D (length in inches) " O.D Outside inch mm Protective Spring Bags-Pair (Fits 5.00 O.D. Springs) ESB ESB lbs/inch N/mm inch mm inch mm ,265 5,627 1,525 6,784 1,810 8,051 2,070 9,208 2,241 9,968 2,533 11,267 2,723 12, Quantity 2 2 Spring inch mm lbs N lbs kgs ,568 6, ,911 8, ,216 9, ,553 11, Spring inch mm 12-14" " - 16"

39 39 SPRING LOCATOR 4.00" O.D. Part Number (Perch O.D.) Outside (Perch O.D.) Spring Locator (I.D = Perch / O.D. = Spring I.D.) inch mm inch mm ESL ESL ESL ESL ESL ESL ESL ESL TH COIL SPRING 5.00" O.D. Outside 6th Coil Spring ,017 4, ,162 5, ,252 5, Spring Spring Quantity Protective Spring Bag (Fits 6th Coil Springs) inch mm inch mm ESB Part Number inch mm inch mm lbs/inch N/mm inch mm inch mm lbs N lbs kgs PULL BAR SPRING 5.00" O.D. Outside Pull Bar Spring / / ,711 12, / / ,895 17, / / ,196 14, / / ,547 24, ,618 11, ,390 15, Part Number inch mm inch mm lbs/inch N/mm inch mm inch mm lbs N lbs kgs Spring Spring Quantity Protective Spring Bag (Fits Pull Bar Springs) inch mm inch mm ESB

40 40 COILOVER 60mm I.D. 80 (length in mm) ,086 1, ,915 1, ,608 1, ,592 1, ,064 1, ,410 1, ,757 2, ,458 2, ,128 2, ,939 2, ,375 2, (length in mm) ,638 1, ,299 1, ,922 1, ,200 1, ,772 1, ,275 1, ,148 1, ,430 2, ,069 2, ,240 2, ,550 2, ,525 2, ,494 3, ,273 3, ,015 3, ,720 3, ,388 3, ,019 3, ,613 3, ,120 4, ,609 4, ,100 4, ,320 5, ,388 5, ,805 5, ,755 6, ,719 6, , (length in mm) , , ,959 1, ,541 1, ,363 1, ,787 1, ,485 1, ,174 1, ,790 1, ,958 2, ,944 2, ,700 2, Part Number mm inch mm inch N/mm lbs/inch mm inch mm inch N lbs kgs lbs

41 41 COILOVER 60mm I.D ,035 2, ,574 3, ,706 3, ,006 3, ,940 3, ,045 4, ,912 4, ,737 4, ,520 4, (length in mm) ,840 1, ,636 1, (length in mm) Part Number mm inch mm inch N/mm lbs/inch mm inch mm inch N lbs kgs lbs

42 42 COILOVER 60mm I.D , ,255 4, , ,100 4, , ,423 4, , ,022 4, , ,640 5, (length in mm) , ,454 1, ,750 1, ,550 1, ,995 2, ,882 2, ,656 2, ,915 2, ,393 2, ,470 3, (length in mm) , ,308 1, ,986 1, ,860 1, ,376 1, ,173 1, ,668 2, ,402 2, ,160 2, ,148 2, ,936 3, ,397 3, ,888 3, (length in mm) , ,361 1, ,280 1, ,092 1, ,786 1, ,798 1, ,279 2, ,052 2, ,941 2, ,188 2, ,215 3, ,140 3, (length in mm) ,146 1, ,081 1, ,148 1, , , , , , Part Number mm inch mm inch N/mm lbs/inch mm inch mm inch N lbs kgs lbs

43 43 COILOVER 60mm I.D. Tender/Linear , , , , , , , , , , , , , , , , , , Tender/Progressive / / / , / / / , Helper Hardware (Spring Coupler) Adapter ADAPTER (Perch Adapter 60mm to 2.50") Part Number mm inch mm inch N/mm lbs/inch mm inch mm inch N lbs kgs lbs COILOVER 65mm I.D. 180 (length in mm) T ,979 1, T ,455 1, T ,666 1, T ,323 2, T ,388 2, T ,756 2, T ,701 2, (length in mm) T ,323 1, T ,308 1, T ,402 1, T ,403 1, T ,245 2, T ,933 2, Part Number mm inch mm inch N/mm lbs/inch mm inch mm inch N lbs kgs lbs

44 44 COILOVER 65mm I.D T ,115 2, T ,253 2, T ,578 2, T ,489 3, T ,257 3, (length in mm) T ,167 1, (length in mm) T ,627 1, T ,044 2, T ,415 2, T ,060 2, Part Number mm inch mm inch N/mm lbs/inch mm inch mm inch N lbs kgs lbs COILOVER 70mm I.D. 200 (length in mm) ,139 1, ,521 1, ,119 1, ,702 1, ,271 2, ,780 2, ,316 2, ,784 2, ,172 2, ,525 2, ,164 2, ,348 3, (length in mm) ,813 1, ,570 1, ,918 2, ,555 2, ,176 2, ,781 2, ,319 2, ,832 2, ,320 2, ,793 3, ,586 3, ,971 3, (length in mm) ,990 1, ,884 1, ,418 1, ,226 2, ,996 2, ,756 2, Part Number mm inch mm inch N/mm lbs/inch mm inch mm inch N lbs kgs lbs

45 45 COILOVER 70mm I.D ,985 2, ,633 2, ,209 2, ,816 2, ,343 3, ,990 3, ,857 3, ,345 3, (length in mm) ,529 1, ,611 1, ,617 1, ,546 1, ,378 1, ,085 2, ,140 2, ,656 2, ,612 2, (length in mm) ,167 1, ,431 1, ,316 1, ,346 1, ,272 2, ,513 2, ,253 2, ,386 2, ,900 2, Tender/Linear , , , , , , , , , , , , , Helper Hardware (Spring Coupler) Part Number mm inch mm inch N/mm lbs/inch mm inch mm inch N lbs kgs lbs

46 46 F3 Standard F3 Standard F3 C ,672 1, F3 C ,806 1, F3 C ,117 1, F3 C ,295 1, F3 C ,096 1, F3 C ,274 1, F3 C ,986 1, F3 C ,099 1, F3 C ,188 1, F3 C , ,588 1, F3 C , ,499 1, F3 C , ,989 2, F3 C , ,012 2, F3 C , ,036 2, F3 C , ,591 2, F3 C , ,281 2, F3 C , ,305 2, Part Number mm inch mm inch N/mm lbs/inch mm inch mm inch N lbs kgs lbs F3 Short Part Number mm inch mm inch N/mm lbs/inch mm inch mm inch N lbs kgs lbs F3 Short ,500 1, ,500 1, ,500 1, ,500 1, ,500 1, ,500 1, ,500 1, ,500 1, ,500 1, , ,500 1, , ,500 1, , ,500 1, , ,500 1, , ,500 1, , ,500 1,

47 47