Item: 1 - Airworthy Airframe

Size: px

Start display at page:

Download "Item: 1 - Airworthy Airframe"

Amy McDowell
5 years ago
Views:

1 Magnum Aviation Murphy Ave. San Martin, CA Phone: Fax: Date: 4/2/2009, 11:56 AM Customer Invoice Work Order: CUSTOMER INFORMATION Van Wyk, Mark 9730 Rancho Hills Drive Gilroy, CA W Reg. No: N Cessna 150H Current A/C TT: , Tach: A/C Serial: Item: 1 - Airworthy Airframe 100 hour/annual Aircraft Inspection , Inspected IAW FAR 43 Appendix D checklist. Lubricated controls, serviced wheel bearings with grease. Eric K Niedrauer: 5.31 Kristopher S Bostic: 6.65 Labor: $1, Parts: $ Shipping: $ Item : $1, Item: 2 - Airworthy Airframe 100 Hour/Annual Engine Inspection. Inspected IAW FAR 43 Appendix D checklist. Compressions: #1 72 #2 75 #3 69 #4 72/80. Drained oil and refilled with 6 qts Shell 80w oil. Replaced CH oil filter, inspection of old filter found no abnormal particles. Replaced induction air filter. Cleaned, gapped and rotated spark plugs. Price 1 BA-4108 Filter element (P/O: Par-1915) EA CH Oil Filter (P/O: Par-2053) EA M674 Gasket (P/O: Par-2075) Labor: $ Parts: $4 Shipping: $ Item : $4 Item: 3 - Airworthy Airframe 100 hour/annual Propeller inspection. Inspected IAW FAR 43 Appendix D checklist. Labor: $ Parts: $ Shipping: $ Item : $ Item: 4 - Airworthy Airframe FAR (d) ELT Test and Inspection. C/W FAR (d) ELT Test and Inspection. Battery Exp. 09/2009. Labor: $ Parts: $ Shipping: $ Item : $ Item: 5 - Airworthy Airframe AD Search done Eric K Niedrauer: 1 6 of

2 Labor: $ Parts: $ Shipping: $ Item : $ Item: 6 - Airworthy Airframe #1 cylinder lower baffle anchor wire broken Installed new baffle anchor wire on #1 cyl. 1 EA Baffle wire (P/O: Par-2110) (Ship: 0.59) Price Labor: $ Parts: $21.60 Shipping: $0.59 Item : $22.19 Item: 7 - Recommended Airframe cabin flooring desintigrating causing dust/dirt buildup on cabin floor skin removed carpet from cabin interior. Eric K Niedrauer: 0.13 Labor: $11.57 Parts: $ Shipping: $ Item : $11.57 Item: 9 - Airworthy Airframe AD R3 flap jack screw C/W AD R3 flap jack screw by visual inspection and lubricating with moly grease. Next compliance due 4/2010. Eric K Niedrauer: 0.13 Labor: $11.57 Parts: $ Shipping: $ Item : $11.57 Item: 10 - Airworthy Airframe AD nut plates C/W AD tail nut plates by visual inspection. Next inspection due at tach Labor: $ Parts: $ Shipping: $ Item : $ Item: 12 - Airworthy Airframe AD R3 seat rails C/W AD R3 seat rails by visual inspection. Next inspection due 4/2010. Labor: $ Parts: $ Shipping: $ Item : $ Item: 13 - Customer Requested spinner does not track straight open issue Notes: Not sure what we can do for this of

3 Labor: $ Parts: $ Shipping: $ Item : $ Item: 14 - Airworthy Airframe Nose strut oozing Resealed nose strut with cessna seal kit SK172-1F. Serviced with MIL-5606 and nitrogen. Kristopher S Bostic: 1.03 Price 0.2 GL 756A1GL HYDRAULIC FLUID (MIL-H-5606A) (P/O: Par-2007) 1 EA Nitrogen Nitrogen units per strut EA SK172-1F NOSE STRUT SEAL KIT (P/O: Par-1996) Labor: $91.67 Parts: $40.80 Shipping: $ Item : $ Item: 15 - Airworthy Airframe STOL wing root fence loose, right side Installed oversized cherry-max rivets in STOL wing root fence on right wing. Kristopher S Bostic: 0.82 Price 2 CR Cherry Max Labor: $72.98 Parts: $1.92 Shipping: $ Item : $74.90 Item: 16 - Airworthy Airframe Pilot's cabin door screws loose Tightened pilots cabin door upper hinge screws. Labor: $ Parts: $ Shipping: $ Item : $ Item: 17 - Recommended Airframe Right steering rod end loose Replaced right steering rod-end. Kristopher S Bostic: 0.20 Price 1 EA S rod end (P/O: Par-2113) (Ship: 1.71) Labor: $17.80 Parts: $25.00 Shipping: $1.71 Item : $44.51 Item: 19 - Airworthy Airframe Left lower inboard flap roller stuck Removed left lower inboard flap roller, cleaned, lubricated and reinstalled on aircraft. Eric K Niedrauer: of

4 Labor: $42.72 Parts: $ Shipping: $ Item : $42.72 Item: 20 - Airworthy Airframe Gaskolator standpipe badly pitted Installed new standpipe in gascolator. Installed screen and bowl with new o-rings and safetied. Price Stand Pipe (P/O: Par-2110) (Ship: ) 1 EA M83248/1-111 O ring EA M83248/1-138 O ring Labor: $ Parts: $ Shipping: $3.80 Item : $ Item: 21 - Airworthy Airframe both main wheel outboard felt ripped apart Replaced both outboard felt seals on main wheels with serviceable parts. Labor: $ Parts: $ Shipping: $ Item : $ Item: 22 - Airworthy Airframe both fuel cap seals cracking from age Replaced left and right fuel cap seals. Price 2 EA B FUEL CAP GASKET (P/O: Par-1872) Labor: $ Parts: $15.62 Shipping: $ Item : $15.62 Item: 23 - Airworthy Airframe stuck trim pulleys, 6 places under floor Installed new trim pulleys under cabin floor, 6 places. Eric K Niedrauer: 1.03 Kristopher S Bostic: 0.33 Price 6 EA S378-1L pulley (P/O: Par-2110) (Ship: 2.76) Labor: $ Parts: $ Shipping: $2.76 Item : $ Item: 24 - Recommended Airframe corrosion top of floor, clean and prime Cleaned corrosion off top of floorboards and painted with zinc chromate primer. Eric K Niedrauer: 0.85 Notes: You could probably do this one yourself... Labor: $75.65 Parts: $ Shipping: $ Item : $ of

5 Item: 25 - Airworthy Airframe brake linings worn out Replaced all 4 brake linings and conditioned them IAW Cleveland service manual. Eric K Niedrauer: 0.51 Price Lining, brake (P/O: Par-1895) Rivet Brake (200) (P/O: Par-1895) Labor: $45.39 Parts: $57.44 Shipping: $ Item : $ Item: 26 - Airworthy Airframe one nose bearing pitted from water Replaced one nose wheel bearing and race. Eric K Niedrauer: 0.40 Price 1 EA CONE (ROLLER BEARING) (P/O: Par-1378) Cup (RACE) (P/O: Par-1378) Labor: $35.60 Parts: $42.09 Shipping: $ Item : $77.69 Item: 27 - Airworthy Airframe left wheel pant bracket cracked Replaced left wheel pant bracket with customer supplied serviceable part. Installed one new nut plate. Kristopher S Bostic: 1.50 Labor: $ Parts: $ Shipping: $ Item : $ Please see the next page for the totals for this invoice 5 6 of

6 Additional Charges Pilot Services Tire Disposal EPA Charge Oil Analysis Shop Supplies Fuel Misc $6.00 Labor Summary Shop Labor: $1, Outside Repair: $ hours were needed to complete this Work Order Taxed Items: Shop Parts, OSR Parts, Shop Supplies Technician Summary: Eric K Niedrauer: 8.84 Kristopher S Bostic: Total Labor: $1, Total Parts: $ Total Shipping: $8.86 Additional Charges: $6.00 Tax: $47.72 Amount Due: $2, Deposit: $ Balance Due: $2, Important Information Invoice Due Upon Receipt. All unpaid invoices will be subject to a service charge of 1.5% per month. We are not responsible for damage to old plastic parts which have to be displaced in order to perform maintenance. Cores are subject to approval by receiving vendor. Charges for rejected cores will be billed to you upon notification from vendor. We accept owner supplied parts as long as they are accompanied by valid paperwork. We can not and will not sign off on any repair made using parts without proper paperwork or repairs done by other maintenance facilities. Van Wyk, Mark or Authorized Representative Date 6 6 of

Seabee Annual Inspection Procedures

Seabee Annual Inspection Procedures Procedures Due to the wide variety of Seabee s flying out there, these procedures should be modified to fit YOUR Seabee. Make sure that all AD s are complied with as well as any required Service Bulletins