INTRODUCING A NEW LINE OF FRP PRODUCTS

Transcription

1 BEING SMART IS GOOD. BEING FIRST IS GOOD. BEING BOTH IS BETTER. INTRODUCING A NEW LINE OF FRP PRODUCTS CABLE LADDERS AND TRAYS Type FOE and FTE

2 OGLAEND SYSTEM The perfect partner for your next project! Simply the best: This motto has followed us over the years as we have developed into the unprecedented market leader in multidiscipline support systems the world over. This experience in smart cable supporting since 1977 has driven us to new levels and many new and exciting projects. We have seen a major increase in our Research & Development due to many different projects and special requirements from our clients. We listen to what our clients say and with this in mind and the demand for new products that last longer and can reduce installation time and costly maintenance. Therefore we have developed a NEW range of FRP (fiber reinforced plastic) cable ladders and trays. You can feel confident that when your next in the market for a non metallic cable support system, the Oglaend System FRP ladder & tray will be your best choice for value, ease of installation and compatibility as our system will accept the Trefoil Smart Cleats, the ETIN tubing clamps, as well as other fixing accessories. As a total supplier of all types of cable supporting systems and in all types of materials, with world wide references, our recommendations are trustworthy and focused. From our head quarters in Norway, possessing the most advanced production facilities possible and in close cooperation with our customers. We have developed into the unprecedented market leader from supplying the Northern oil and gas industries for the past 28 years. This environment represents one of the harshest test conditions possible and our cable management systems have stood the test of time, and documented installations can be found in our literature. We have designed our latest FRP system based on the same concept that brought us the name of unprecedented market leader. Therefore we are confident you will find our FRP Cable Ladders and Trays Simply the best" 2

3 FRP contents: Overview the perfect partner Page 2 Development of a new product line 4 The Pultrusion Process 5 Test and standards 5 FRP Product Advantages 6 Specification data for FOE & FTE ladder and tray 7-8 Oglaend System Advantages 8-10 Preslotted trays and ladder rungs 8 The Noni principle 8 Patented locking rung 9 Self-Lock vibration proof fasteners 9 Trifoil SmartCleat 10 ETIN Tubing Clamps 10 Market Applications 11 Cable Ladder FOE with Elbows, Risers, Covers, Dividers, Splice Connectors, Drilling Jig and Accessories Accessories Cable Tray FTE with Elbows, Risers, Covers, Dividers, Splice Connectors, Drilling Jig and Accessories Load & Deflection data 24 Chemical Exposure Chart 25 Installation Guide 26 NEMA FG1(current issue) 27 Patents and design applications. Many of Oglaend System s products are patented or protected by design applications. A complete list is available on request. Subject to minor changes without notice. FRP Profiles 28 Accessories Screws, nuts and bolts 29 3

4 OGLAEND SYSTEM DEVELOPING A NEW PRODUCT LINE Simply the best: When we started to design our new cable management system, we started from scratch. Our new FRP system s qualities are based on our thorough examination of market trends from various industries and regions, customer requirements and needs, competitors design and cost factors evaluated against more than 25 years of experience as a supplier of multidiscipline support systems world wide. Once we have digested our market data, we then started to design our system around the client s needs and our SMART technology. The founder behind the Oglaend System s success, Gunnstein Austigard once again was in the driving seat leading the development of the new product line, a new generation cable management systems in FRP. Together with Fraser Campbell, the FRP project manager and the engineering/ design team managed to modernize a well known technology into simply the best! Always at the cutting edge of design, seen here mid 2005 with the engineering team explaining what is expected and required from the new product. It s a magical moment when calculated material qualities and designed expectations are confirmed in the process. The products were thoroughly tested to make sure the load and deflection tables on page 20 are correct. The first tray rolls of the production line and is given the seal of approval by Gunnstein Austigard (left) and Fraser Campbell. Never far away from the action Gunnstein Austigard make sure test results for load capacity are within the expectations of the Nema 20 C. 4

5 Roving The pultrution process overview Resin bath Continuous mats and surface veil Pre-molding and finish-molding Pulling Cutting Heated die Process controle Pultrusion is a continuous process of roving, or mat/ roving bundles, which are drawn through a resin impregnated bath to coat each fiber with a specially formulated resin mixture. The impregnated fibers are then drawn through a heated die which forms the desired cross section. Curing of the thermosetting resin is initiated by heat in the die and catalyst in the resin. The rate of reaction is controlled by heating of the die. The resulting high unidirectional strength profile is cut to length and is ready to be used in another Oglaend FRP cable management system. Test and Standards Tests shown below are our current standards. Our test database is always being improved so please contact Oglaend System for our latest test data. Fire Rating: BS 467 part 7 class I BS 476 part 7 class II ASTM E 84 class I Flame Propagation: BS 476 part 6 Self Extinguishing: UL94-VO ASTM-D 635 Halogen free to: IEC UV Stability: All products are UV resistant with surface veil. Termal Conductivity FRP is widely used in temperatures from -150 Cto +130 C. NEMA FG1 FOE 75 = Nema 12A FOE 100 = Nema 16B FOE 150 = Nema 20C Effects of temperature FRP Temperature in Strength Strength º F ºC Polyester Vinyl Ester resin by % resin by % Note: Percentages listed are approximate. For extreme temperature conditions contact technical department. 5

6 FRP Product Advantages HIGH STRENGTH Higher strength than structural steel on a weight to weight ratio. IMPACT RESISTANT Returns to original position without any permanent deflection or distortion. LIGHT WEIGHT FRP pultrusion is lightweight, on average 15 to 20% that of steel products CORROSION RESISTANT Pultruded products are not susceptible to rusting, pealing or flaking and are impervious to a broad range of corrosive elements. NON-CONDUCTIVE Glass reinforced pultrusions have low thermal conductivity and are non-conductive. ELECTRO-MAGNETIC TRANSPARENCY Pultruded products are transparent to radio waves, microwaves and other electromagnetic frequencies. DIMENSIONAL STABILITY The coefficient of thermal expansion of pultruded products are marginally less than steel and aluminum. LOW TEMPERATURE FRP has excellent mechanical properties at low temperatures. FIRE RETARDANCY All products used in the construction of ladders and trays are manufactured in accordance with ASTM-E84 class 1 & BS476 part 7 class l and ll. Self extinguishing to UL94 V-0 under test procedure ASTM-D 635. ULTRAVIOLET STABILITY All pultruded products contain a Ultraviolet inhibitor, this is further complimented with an external surface veil. WEIGTH AND SHIPPING Our versatile system is light weight and can be flat pack to reduce expensive shipping costs. HALOGEN FREE Our products are Rated Zero Halogen to IEC FRP is extremely flexible: Easy to cut. No hot work permit required. Simple hand tools can be used for cutting and drilling. Modifications are made simple on site. FRP offers a Long Life cycle. 6

7 SPECIFICATION DATA FOR OGLAEND SYSTEM FOE AND FTE LADDER & TRAY 1. INTERNATIONAL STANDARDS Cable ladder and tray system should comply with the materials and fabrication requirements detailed below 2. FRP LADDER AND TRAY SYSTEM SHALL CONFORM TO: 1. BS 476 part 7 class I 2. BS 476 part 7 class II 3. ASTM E84 class I 4. BS 476 part 6 5. ASTM D Nema standard- FG-1 (latest edition) 7. IEC LADDER SIZES a. Ladder Heights: 75, 100, 150mm. b. Ladder widths: 150 through to 900mm. c. Ladder lengths: 3m & 6m. d. Rung Spacing is 300mm (other sizes available) e. Radius of Fittings: 300mm is standard. 600 & 900 on request. Fittings shall be mitered type. d. No moulded or pressed fitting are acceptable as they would not comply with specification. e. All ladder rungs are perforated as standard. 4. RESIN SYSTEM 1. ISO Polyester class ll halogen free code (PHF) 2. ISO Polyester class l code (PCI) 3. Vinyl ester code (VE) Our standard resin system is our (PHF) 5. CABLE TRAY SIZES a. Widths: 50, 100, 200 & 300mm. For sizes greater than 300mm contact Oglaend System for combination options and loading data. b. Depths: 50 and 80mm respectively c. Tray covers are self locking and clip on type. d. All trays will be perforated at 300mm centers. e. Radius of Fittings: 250mm is standard. 6. LOADING REQUIREMENTS a. There are three working load classifications for FRP cable ladder based on (20 ) support spans with a minimum safety factor of 1.5. Class Working Load A 50 Lbs./Lineal Ft or 74 kgs/mt B 75 Lbs./Lineal Ft or 111 kgs/mt C 100 Lbs./Lineal Ft or 148 kgs/mt b. Span support criteria shall be as specified (reference the following table) Support Span (Ft.) Working Load in Lbs./Lineal Ft. Class A Class B Class C * Independent test reports are required to substantiates NEMA FG 1 load criteria. 9. MATERIAL CONTENT a.glassfibre to resin ratio shall be maintained between % by weight in all pultruded components. b. Flat sheet shall be 40-50% 10. ULTRAVIOLET (UV) Pultruded products shall have an integral chemical additive to help to mitigate discoloration and a surface veil will help to prevent glass fiber exposure, thus maximizing total UV protection. 11. FLAME SPREAD All composite materials shall be fire retardant and have a flame spread rating in accordance with ASTM E-84 class I or BS476 part 7 class l and II. 12. PHYSICAL PROPERTIES Straight Ladder section shall be pultruded glass reinforced with a premium resin system: a. Our ladder and tray members have been designed specifically to optimize the load capacity in the form of a beam section. This UNIQUE style has two important advantages, the first being the way our splice plate fits flush and tightly between the flanges (see detail a ) thus preventing the plate from slipping at time of installation. The other is our patented rung to lad der attachment where the rung fits neatly between two flanges and locked using our newly designed and patented insert (see detail «b»). «b» is described in detail on page 9. b.rung to side rail member connections shall be connected by a fire retardant (UL94 VO halogen free) composite locking clip. The rung to side rail mechanical connection shall resist both vertical shear and rung pullout. c. The height of the rung is 24mm to maximize cable installations. d. All Rungs have perforations along the length to aid easy installation of cables. e. All sections are able to use Oglaend ETIN tubing clamp and TREFOIL SmartCleats and other fixing accessories. f. Straight sections of ladder and tray are predrilled to accept connector plates. g. All cut ends and drilled holes are sealed prior to goods leaving factory. 13. CONNECTOR PLATES AND FASTENERS a. Splice plates are in Stainless Steel AISI 316L and designed with sufficient strength to suit all applications. b.anti VIBRATION SOLUTION. All splice plates are attached to the FRP ladder and tray using the Oglaend s self-locking bolt and safety nut. c. Fasteners for ladders are 10mm diameter for splice plates and 8mm for the rung fixing detail. d.fasteners for trays are 6mm diameter. b a 7

8 The ADVANTAGES of Oglaend System FRP products Reduce installation costs and time by: Using longer spanning products. Snap on Lids. Flexible fitting. Quick locking antivibration nuts..apply Oglaend System s Smart technology. Our anti-vibration locking system and our NEW patented SmartLok composite insert which is heat resistant, fire retardant and halogen free, means no mess, no fuss, no glue, just a quick clean and simple installation. We are confident, once you use this system, you will see the advantages for yourself. Our PATENTED profile with its built in trim edge helps reduce the risk of cables being snagged or cut and prevents ladder rung from moving vertically whilst assembly takes place. This style of design adds more overall rigidity. Preslotted trays and ladder rungs All fixing holes on both ladders and trays can be used for ETIN tubing clamps. See page 10. Trim Edge. Used to prevent cable snagging. Trim Edge. Restricts movement of ladder rung vertically and adds rigidity. The preslotted design saves drilling time. Unique off centre beam design, for better loading capacity. ETIN snap into the FRP preslots Cover Snap Lock for all FTE trays 7 x 20 mm Cover Hook for premounting on the cover. Then fix to the profiled FOE ladder side pieces. All Steel(SS) accessories are supplied in AISI 316. The unique profiled FOE ladder side pieces and FTE tray are fixed to brackets with a simple fixing clamp designed for outside use. The patented Noni principle 9/10-holes for hinges, connectors and risers. The combination of the 9 and 10 holes circles gives adjustment in steps of 4 and is locked like a «welded one». 4 steps Ø 7 Ø 11 Flexi around every obstacle 8

9 Anti Vibration Solution Use Oglaend s self locking flange nut when joining splice plates to our FRP ladder or tray system. This prevents joints from loosening through vibration and gives peace of mind long after installation is complete. FRP self-lock system includes Vibration-proof bolt sets HALOGEN FREE FIRE RETARDENT Self-Locking Screws with safe flange nuts all in SS Our patented SmartLok rung insert With its fire retardant, low smoke halogen free properties, this clip with its glass reinforced sides fits neatly into the rung by simply squeezing the end of the clip together and pushed into the rung. Loosening diagram. Junker vibration test. 45,4 Pretention kn 40,8 36,3 31,7 27,2 22,7 18,1 13,6 9,0 4,5 The clip is locked into place by the glass reinforced taps on each side and the screw is then inserted through the channel into the clip thus preventing any type of pull out. Finally the trim edge on the ladder profile will fix the rung in position. TRADITIONAL The nut is moveable during vibrations because of side wards thread gap. OUR STANDARD: The nut is locked during vibrations because all thread contact stops side wards movement Time (seconds) Self Lock Nut All metal Lock nut Standard Nut Self-Lock, a unique pretension thread locking system. ASK FOR SEPARATE BROCHURE. 9

10 Oglaend System Smart products fit the FRP design. Both SmartCleat and ETIN are patented. Ask for special brochures. Smart Cleat the best cleat for trefoil installation: 1. Saves space, both in height and width. 2. Plastic liners not required for trefoil installations due to the design of the clamp providing a smooth surface. 3. Suitable for fixing to any preslotted rung design. 5. Low weight. Compact and light design. 7. Low product price and low installation cost. 8. The SmartCleat cover cables from Ø 25 mm - Ø 99 mm in trefoil formation and for single cables from Ø 39 mm - Ø 99 mm. 9. The SmartCleat is tested up to 160 ka-peak at SINTEF Trondheim, Norway. ETIN Tubing Clamps give 60-70% overall cost savings! ETIN snap into the FRP preslots.....it pays to use the ETIN from the very first clip! Compare the ETIN clamp with all competing clamps on the market. ETIN is developed for better project economics. The largest jobs give you the greatest savings. Front-mounting is only one of the advantages. ETIN Clamps are safe during fire! Type OE-CBM For 6-12mm or 1/4-1/2 pipes Type OE-CB-25 For mm or 5/8-1 pipes 10

11 Market application Chemical processing Food and Beverage Mining Tunnels Oil & Gas Petrochemical Transportation Water & Wastewater Metros 11

12 CABLE LADDER FOE Ordering tips: State Type name and art. no. Ordering options - see guide below: For loading date see page 24. PART NUMBER SELECTION FOR FOE LADDER Part numbers marked in RED are our STANDARD and can be found opposite relevant products. Items in BLUE are OPTIONAL and you must amend part number accordingly. Series and height Type Code Angle Width Radius Length/mt Material Quality FOE-75 CL= Cable Ladder R3 3 PHF = ISO Polyester Class ll H/free FOE-100 FE = Flat Elbow R6 6 PCI = ISO Polyester Class l FOE-150 TE = Tee-Piece R9 VE = Vinyl ester CP = Cross Piece FR = Flexi Riser* 750 RP = Reducer (R/L) 900 STANDARD: FOE-150 FE R3 = Flat Elbow in 90, width 900 and radius 300mm in PHF. OPTIONAL: FOE-150 FE R6-VE = Flat Elbow in 30 and radius 600mm in Vinyl ester. *) The Flexi Riser cover both in- and outside. Any questions? Please don t hesitate to contact us! Smart options come from close cooperation. Because of it s unique design! It s flexible, strong, preslotted and patented! The patented ladder side pieces unique strength and load capacity are secured through out the installation by the splice connectors fit flush and tightly between the flanges. Remember: Screws are included! Listed number screws before brackets are supplied stdr. with the parts.* 4(8) M10x20 *) NB! In special conditions secure the set up with the listed number put in brackets. For order no. see page 29. Flexi Riser built with 2 parts. See page 15 for details and building measurements. Splice connectors fixed with vibration proof Self-Locking Screws with flange nuts. All in SS AISI

13 CABLE LADDER FOE Cable Ladder FOE-75 Type B A PHF Art. no.: Kg/m 3000 mm Loading depth H: 46 B A FOE-75 CL mm ,8 FOE-75 CL ` ,2 FOE-75 CL ` ,6 FOE-75 CL ` ,9 FOE-75 CL ` ,3 FOE-75 CL ` ,7 Cable Ladder FOE-100 Type B A PHF Art. no.: Kg/m 3000 mm 300 Loading depth H: 71 B FOE-100 CL mm ,4 FOE-100 CL ` ,8 FOE-100 CL ` ,1 FOE-100 CL ` ,5 FOE-100 CL ` ,8 FOE-100 CL ` ,2 100 A Cable Ladder FOE mm Loading depth H: 120 B A Type B A PHF Art. no.: Kg/m FOE-150 CL mm ,3 FOE-150 CL ` ,6 FOE-150 CL ` ,0 FOE-150 CL ` ,4 FOE-150 CL ` ,7 FOE-150 CL ` ,1 Flat Elbows 90 R300 R 448,5 Width FOE-75 FE R ,6 FOE-75 FE R ,8 FOE-75 FE R ,6 FOE-75 FE R ,5 FOE-75 FE R ,3 FOE-75 FE R ,2 FOE-100 FE R ,4 FOE-100 FE R ,7 FOE-100 FE R ,6 FOE-100 FE R ,5 FOE-100 FE R ,5 FOE-100 FE R ,4 FOE-150 FE R ,5 FOE-150 FE R ,2 FOE-150 FE R ,5 FOE-150 FE R ,7 FOE-150 FE R ,0 FOE-150 FE R ,3 13

14 193,5 467 CABLE LADDER FOE Flat Elbows 45 R300 FOE-75 FE R ,2 FOE-75 FE R ,9 FOE-75 FE R ,4 FOE-75 FE R ,8 FOE-75 FE R ,3 FOE-75 FE R ,8 FOE-100 FE R ,7 FOE-100 FE R ,4 FOE-100 FE R ,9 FOE-100 FE R ,4 FOE-100 FE R ,0 FOE-100 FE R ,5 FOE-150 FE R ,7 FOE-150 FE R ,6 FOE-150 FE R ,3 FOE-150 FE R ,0 FOE-150 FE R ,7 FOE-150 FE R ,4 Width Width Tee-Piece FOE-75 TE-150/150-R ,3 FOE-75 TE-300/300-R ,2 FOE-75 TE-450/450-R ,5 FOE-75 TE-600/600-R ,5 FOE-75 TE-750/750-R ,1 FOE-75 TE-900/900-R ,2 FOE-100 TE-150/150-R ,5 FOE-100 TE-300/300-R ,5 FOE-100 TE-450/450-R ,8 FOE-100 TE-600/600-R ,9 FOE-100 TE-750/750-R ,6 FOE-100 TE-900/900-R ,8 FOE-150 TE-150/150-R ,1 FOE-150 TE-300/300-R ,3 FOE-150 TE-450/450-R ,0 FOE-150 TE-600/600-R ,4 FOE-150 TE-750/750-R ,4 FOE-150 TE-900/900-R ,9 437 Width M10x20 The Flexi Riser part is complete with 4 vertical hinge splices which are adjustable in steps of 4. 4 steps Flexi Riser FOE R300 FOE-75 FR ,8 FOE-75 FR ,9 FOE-75 FR ,0 FOE-75 FR ,1 FOE-75 FR ,3 FOE-75 FR ,4 FOE-100 FR ,2 FOE-100 FR ,3 FOE-100 FR ,4 FOE-100 FR ,5 FOE-100 FR ,6 FOE-100 FR ,7 FOE-150 FR ,5 FOE-150 FR ,6 FOE-150 FR ,7 FOE-150 FR ,8 FOE-150 FR ,0 FOE-150 FR ,1 The patented combination of the 9 and 10 holes circles gives adjustment in steps of 4. 4 steps For other radius than standard 300, study next page, add more riser-parts, or ask us for complete assembled parts. 14

15 Flexi around every obstacle CABLE LADDER FOE Flexi Riser FOE in combination with 4 Splice Hinges gives in- or outside risers with free angle. Installation measurements: FOE 100 Inside ONE RISER DOES IT ALL: Whether inside or outside we have simplified a costly purchasing process and reduced engineering time with just one SMART fitting to suit all applications. Study the FOE Flexi Riser illustrations below to see how to best solve your every day installations problems quick and easy and reduce your overall installation costs. FOE 100 Outside R R Installation measurements between ladder ends: FOE 75 Outside FOE 75 Inside R 354mm = 220x220 R 371mm = 219x219 R 551mm = 417x417 R 568mm = 416x416 R 746mm = 612x612 R 763mm = 610x610 FOE 150 Outside FOE 150 Inside R 317mm = 206x206 R 407mm = 206x206 R 515mm = 404x404 R 604mm = 446x446 R 709mm = 598x598 R 799mm = 640x640 Installation measurements: FOE 75 and M10x20 Splice connector separat order Reducer part is complete with brackets and screws Reducer Part Splice Connector separate order FOE-75 RP ,8 FOE-75 RP ,0 FOE-75 RP ,1 FOE-75 RP ,3 FOE-75 RP ,5 FOE-100 RP ,0 FOE-100 RP ,2 FOE-100 RP ,4 FOE-100 RP ,6 FOE-100 RP ,8 FOE-150 RP ,5 FOE-150 RP ,9 FOE-150 RP ,3 FOE-150 RP ,8 FOE-150 RP ,2 15

16 CABLE LADDER FOE FLAT ELBOWS 15 R600 (OPTION) IN COMBINATIONS = and 90 X X X FOE Flat Elbow Zig Zags Study the installation principles left and at bottom to see how to use the flexible 15 Flat Elbow with radius 600 mm. For more information about tailor-making flat elbows please contact us. Building Zig Zags using FOE Flat Elbows Elbow Combination give X mm (same for all widths) 2 x 15 : 52mm 2 x 30 : 203mm 2 x 45 : 443mm 15 Flat Elbow with radius 600 mm are supplied as options to build in combinations for 30 /45 /60 /75 and 90 Flat Elbows. On request they are supplied fixed complete. Right a 15 Flat Elbow is equipped with 4 End Splices. End Splices are supplied complete with screws and you need 4 pcs for each combination. In between the 15 sections you need Splice Connectors, 2 pcs each step in 15. See below. The Covers are combined at the same principle as the 15 section. 4 M10x20 Splice Connectors End Splice Parts The third hole is only to easy see the difference when busy on site. Use of clamps: 2 clamps pr. section End Splice Parts 1 cover to each 15 Splice connectors in between Flat Elbows 15 R600 FOE-75 FE R ,6 FOE-75 FE R ,7 FOE-75 FE R ,9 FOE-75 FE R ,0 FOE-75 FE R ,2 FOE-75 FE R ,3 FOE-100 FE R ,7 FOE-100 FE R ,8 FOE-100 FE R ,0 FOE-100 FE R ,2 FOE-100 FE R ,3 FOE-100 FE R ,5 FOE-150 FE R ,2 FOE-150 FE R ,4 FOE-150 FE R ,6 FOE-150 FE R ,9 FOE-150 FE R ,1 FOE-150 FE R ,3 Resin options: Add -PCI or -VE to type name. Cover Flat Elbow 15 R600 Type Art. no. PHF: Kg FOE CO-FE ,2 FOE CO-FE ,4 FOE CO-FE ,6 FOE CO-FE ,8 FOE CO-FE ,1 FOE CO-FE ,4 Resin options: Add -PCI or -VE to type name. Flat Elbow 15 R600 in combinations for and 90 Each combination need 4 End Splice Parts to fix the elbow to ladders. For 30 combine 2x15 parts and put 2 Splice connectors in between. For 45 combine 3x15 parts and put 6 Splice connectors in between. For 60 combine 4x15 parts and put 8 Splice connectors in between. For 90 combine 6x15 parts and put 10 Splice connectors in between. Splice Connectors for 15 FE R600 SS Art. no.: Kg FOE-75 FE-SC-7,5-R ,1 FOE-100 FE-SC-7,5-R ,2 FOE-150 FE-SC-7,5-R ,3 End Splice Part for 15 FE R600 SS Art. no.: kg FOE-75 FE-SC-15-R ,1 FOE-100 FE-SC-15-R ,2 FOE-150 FE--SC-15-R ,3 16

17 CABLE LADDER FOE Cover Cable Ladder 3m length for straight ladders /m FOE CO-CL ,0 FOE CO-CL ,8 FOE CO-CL ,7 FOE CO-CL ,5 FOE CO-CL ,4 FOE CO-CL ,2 Resin options: Add -PCI or -VE to type name. 1 M6x20 M6x16 Fix the Cover Clamps on one side. The others slides to hook then fix. 7 x 20mm Cover Clamp For fixing of ladder cover Type SS Art. no.: Kg FOE CC ,1 Recommended use: 8 clamps pr. ladder length. At extreme wind exposure double the clamps or ask for special solution. Use of clamps: 4 clamps pr. section Cover Flat Elbow 90 / 45 A 45 the same as 90, just drop the mid section B. B A A A FOE CO-FE ,9 FOE CO-FE ,9 FOE CO-FE ,2 FOE CO-FE ,6 FOE CO-FE ,3 FOE CO-FE ,1 Cover Flat Elbow 45 Same as 90, just drop the midt section B. Resin options: Add -PCI or -VE to type name. Use of clamps: 6 clamps Use of clamps: 6 clamps Same in- and outside Supplied flat Cover Tee-Piece FOE CO-TE ,8 FOE CO-TE ,7 FOE CO-TE ,8 FOE CO-TE ,1 FOE CO-TE ,7 FOE CO-TE ,6 Resin options: Add -PCI or -VE to type name. Cover Flexi-Riser FOE CO-FR ,3 FOE CO-FR ,6 FOE CO-FR ,9 FOE CO-FR ,2 FOE CO-FR ,5 FOE CO-FR ,8 Resin options: Add -PCI or -VE to type name. 4 M6x16 H Divider 3m length for straight ladders Type H mm PHF Art. no.: Kg/m FOE-75 DI ,4 FOE-100 DI ,5 FOE-150 DI ,8 30 Resin options: Add -PCI or -VE to type name. 17

18 CABLE LADDER FOE 4 M6x16 Exit Plate Combine up to actual width FOE EX , M4,8x13 Resin options: Add -PCI or -VE to type name. Combine up to actual width Resin options: Add -PCI or -VE to type name. End Plate FOE-75 EP ,1 FOE-75 EP ,2 FOE-75 EP ,3 FOE-75 EP ,4 FOE-75 EP ,5 FOE-75 EP ,5 FOE-100 EP ,1 FOE-100 EP ,2 FOE-100 EP ,3 FOE-100 EP ,4 FOE-100 EP ,5 FOE-100 EP ,7 FOE-150 EP ,2 FOE-150 EP ,3 FOE-150 EP ,5 FOE-150 EP ,6 FOE-150 EP ,8 FOE-150 EP ,9 4(8) 4 M10x20 4(8) 4 M10x20 4(8) 4 M10x20 Splice Connectors Type SS Art. no.: Kg FOE-75 SC ,3 FOE-100 SC ,4 FOE-150 SC , (8) 4 M10x Splice Angle Horizontal Type SS Art. no.: Kg FOE-75 SA-HO ,3 FOE-100 SA-HO ,4 FOE-150 SA-HO ,6 4(8) 4 M10x20 SD = Standard Duty (left) HD = Heavy Duty (below) Hinge Vertical Type SS Art. no.: Kg FOE-75 HV-SD ,5 FOE-100 HV-SD ,6 FOE-150 HV-SD ,1 4 steps Equipped with the patented Noni principle with the combination of the 9/10 holes gives adjustment in steps of 4. 4 steps Type SS Art. no.: Kg FOE-75 HV-HD ,6 FOE-100 HV-HD ,7 FOE-150 HV-HD ,3 18

19 CABLE LADDER FOE Smart Jig Drilling jig for 10 mm holes Type SS Art. no.: Kg FOE-DJ75/100/ ,4 With this jig you can predrill holes in exact position when cutting length on site. After modificatien use Oglaend System Sealing Kit and continue the installation without loosing quality. FOE ladders FOE 75 FOE 100 FOE 150 Ø 7 Fixing Clamps Fits both ladders and trays Type SS Art. no.: Kg FOE/FTE FC-A ,1 Ø M10x20 11 x 20 Fixing Clamps Fits both ladders and trays Type SS Art. no.: Kg OE-FC-B ,1 Ø 11 Must be used for vertical installations. «Build your own FOE ladder» Resin options: Add -PCI or -VE to type name. Predrilled side channels in 75,100 or 150 heights, supplied in 3 or 6mt lengths for easy installation at site. Rungs supplied preslotted, complete with the patented SmartLok insert and SS pan head bolts for easy assembly , ,5 x Rung spacing standard is 300 mm. Rung widths from 150mm to 9000mm Ask for alternative rung spacing s or resin systems. Order 10 rungs pr. ladder at stdr. space 300 mm (20 pr. 6m). FOE Side Channel /m FOE-75 SP ,1 FOE-100 SP ,4 FOE-150 SP ,3 FOE Rung for additional support/use. FOE RU ,2 FOE RU ,3 FOE RU ,4 FOE RU ,5 FOE RU ,6 FOE RU ,7 Sealing Kit is Vinyl ester suitable for all Oglaend Systems FRP products. For use after field modifications. Sealing Kit 1l. Type FRP SK-1 Art. no.: Two component system. 19

20 CABLE TRAY FTE Ordering tips: State Type name and art.no. Ordering options - see guide below: For loading date see page 24. PART NUMBER SELECTION FOR FTE TRAY Part numbers marked in RED are our STANDARD and can be found opposite relevant products. Items in BLUE are OPTIONAL and you must amend part number accordingly. Series and height Type Code Angle Width Radius Material Quality FTE-50 CT= Cable Tray R25 PHF = ISO Polyester Class ll H/free FTE-80 FE = Flat Elbow PCI = ISO Polyester Class l TE = Tee-Piece VE = Vinyl ester CP = Cross Piece CR = Combi Riser RP = Reducer Part STANDARD: FTE-50 FE R25 = Flat Elbow in 90 and radius 250mm in PHF. OPTIONAL: FTE-50 FE R25-VE = Flat Elbow in 30 in Vinyl ester. *) The Combi Riser cover both in- and outside. Any questions? Please don t hesitate to contact us! Smart options come from close cooperation. CABLE TRAY FTE Cable tray FTE-50 Type B A PHF Art. no.: Kg/m FTE-50 CT ,3 FTE-50 CT ,7 FTE-50 CT ,3 FTE-50 CT , mm Loading depth H: 47 A B mm Loading depth H: 77 A B Cable tray FTE-80 Type B A PHF Art. no.: Kg/m FTE-80 CT ,9 FTE-80 CT ,2 FTE-80 CT ,0 FTE-80 CT ,

21 237,5 237,5 CABLE TRAY FTE Width Flat Elbows 90 FTE-50 FE ,8 FTE-50 FE ,1 FTE-50 FE ,6 FTE-50 FE ,2 FTE-80 FE ,3 FTE-80 FE ,5 FTE-80 FE ,1 FTE-80 FE ,7 69,6 167,9 Flat Elbows 45 FTE-50 FE ,4 FTE-50 FE ,6 FTE-50 FE ,8 FTE-50 FE ,1 FTE-80 FE ,6 FTE-80 FE ,8 FTE-80 FE ,1 FTE-80 FE , TEE-PIECE FTE-50 TE-50/ ,6 FTE-50 TE-100/ ,7 FTE-50 TE-200/ ,1 FTE-50 TE-300/ ,6 FTE-80 TE-50/ ,9 FTE-80 TE-100/ ,0 FTE-80 TE-200/ ,4 FTE-80 TE-300/ ,9 Resin options: Add -PCI or -VE to type name. 4 M6x16 Splice Angle Horizontal Type SS Art. no.: Kg FTE-50 SA-HO ,1 FTE-80 SA-HO ,2 All Steel(SS) accessories are supplied in AISI 316L. For use with unequal widths. Cut tray to fit. Remember: Screws are included! Listed number screws before brackets are supplied stdr. with the parts.* 4(8) M10x20 Ask for Oglaend System s Support Catalogue *) NB! In special conditions secure the set up with the listed number put in brackets. For order no. see page

22 Supplied as inside, here with turned splices for outside use. 8 M6x16 Turn splices for outside use CABLE TRAY FTE Combi-Riser FTE-50 CR ,9 FTE-50 CR ,0 FTE-50 CR ,2 FTE-50 CR ,4 FTE-80 CR ,5 FTE-80 CR ,6 FTE-80 CR ,8 FTE-80 CR ,0 4 M6x For both in- and outside use Splice Angle 45 FTE-50 SA-VE ,1 FTE-80 SA-VE ,2 The splice angled 45 is suitable for building risers on site. Use our preslotted Drilling Jig to exact drilling of holes after cutting tray lengths. Seal with Oglaend Resin. Splice connector separat order Reducer Part Splice connector separat order FTE-50 RP ,2 FTE-50 RP ,2 FTE-50 RP ,3 FTE-80 RP ,3 FTE-80 RP ,3 FTE-80 RP ,5 4 M6x16 Reducer part Resin options: Add -PCI or -VE to type name. Cover FTE 3m length /m FTE CO-CT ,8 FTE CO-CT ,0 FTE CO-CT ,6 FTE CO-CT ,1 Cover Flat Elbow 90 / 45 A B C FTE-50 CO-FE ,4 FTE-50 CO-FE ,5 FTE-50 CO-FE ,0 FTE-50 CO-FE ,5 A C Cover Flat Elbow 45 Same as 90, just drop the midt section B. Cover Combi-Riser Cut from FTE lengths and adapt in- or outside on site. Large numbers are tailormade on request. Resin options: Add -PCI or -VE to type name. 22

23 4 M6x16 CABLE TRAY FTE Divider Type H mm PHF Art. no.: Kg/m FTE-50 DI ,4 FTE-80 DI ,5 H H: 45 and 70 mm 30 Resin options: Add -PCI or -VE to type name. 2 M4,8x13 End Plate FTE-50 EP ,02 FTE-50 EP ,04 FTE-50 EP ,06 FTE-50 EP ,1 FTE-80 EP ,03 FTE-80 EP ,06 FTE-80 EP ,1 FTE-80 EP ,2 4 M6x16 Resin options: Add -PCI or -VE to type name. Splice Connectors Type SS Art. no.: Kg FTE-50 SC ,1 FTE-80 SC ,2 4(8) M6x16 4 steps Equipped with the patented Noni principle with the combination of the 9/10 holes gives adjustment in steps of 4. Hinge Vertical Type SS Art. no.: Kg FTE-50 HV ,2 FTE-80 HV ,3 FTE trays Smart Jig Drilling jig for 7mm drill Type SS Art. no.: FTE-DJ 50/ ,2 With this jig you can predrill holes in exact position when cutting length on site. After modification use Oglaend System Sealing Kit and continue the installation without loosing quality. 23

24 CABLE TRAY FTE Ø 7 Fixing Clamps Fits both ladders and trays Type SS Art. no.: kg FOE/FTE FC-A ,04 Ø 11 1 M10x20 11 x 20 Fixing Clamps Fits both ladders and trays Type SS Art. no.: kg OE-FC-B ,07 Ø 11 Must be used for vertical installations. Sealing Kit is Vinyl ester suitable for all Oglaend Systems FRP products. For use after field modifications. Sealing Kit 1l. Type FRP SK-1 Art. no.: Two component system. LOAD & DEFLECTION TABLE FOR OGLAEND SYSTEM FOE CABLE LADDER & FTE TRAYS For all products: Actual deflection is less than restricted deflection D. Uniformly distributed load in kg/m and deflection D in mm Span L (m) 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 D = L/200(mm) 5 7, , , , ,5 30 Load (kg/m) kg/m kg/m kg/m kg/m kg/m kg/m kg/m kg/m kg/m kg/m kg/m Cable Tray FR-PHF FTE-50-P Span not recommended FTE-50-P FTE-50-P FTE-50-P FTE-80-P FTE-80-P FTE-80-P FTE-80-P Cable Tray FR-VE FTE-50-P FTE-50-P FTE-50-P FTE-50-P FTE-80-P FTE-80-P FTE-80-P FTE-80-P Cable Ladder FR-PHF FOE FOE FOE Cable Ladder FR-VE FOE FOE FOE The above load deflection data is theoretical with a minimum safety factor of 1.5 included. Contact Oglaend System s technical department for further information. 24

25 CHEMICAL EXPOSURE GUIDE The information compiled in this exposure chart is related to data collected from actual projects installed in the field. Temperatures used are neither minimum nor maximum but represents a cross section of test conditions. Some products may be suitable for higher temperatures but individual testing should be carried out prior to installation. Please make contact with Oglaend System for any special applications you may have. RESIN SELECTION Isophthalic ISOFR Uses modified premium grade Isophthalic polyester resins. Fire retardant and complies with ASTM E 84 and ASTM D635 Vinyl ester VEFR Uses vinyl ester fire retardant resin and complies with ASTM E 84 and ASTM D635 CHEMICAL EXPOSURE GUIDE CHEMICAL ISOPHATHALIC VINYL ESTER CHEMICAL ISOPHATHALIC VINYL ESTER ENVIRONMENT Wt % Temp F Wt % Temp F ENVIRONMENT Wt % Temp F Wt % Temp F Acetic Acid Lactic Acid SAT 170 SAT 200 Acetic Acid Lead Acetate SAT 170 SAT 200 Aluminium Chlorine SAT 170 SAT 200 Lead Chloride SAT 140 SAT 200 Aluminium Hydroxide SAT 160 SAT 170 Lead Nitrate SAT SAT 200 Aluminium Nitrate SAT 150 SAT 170 Linseed Oil Aluminium Sulfate SAT 180 SAT 200 Lithium Chloride SAT 150 SAT 190 Ammonium Chloride SAT 170 SAT 190 Magnesium Carbonate SAT 140 SAT 170 Ammonium Hydroxide Magnesium Chloride SAT 170 SAT 200 Ammonium Hydroxide Magnesium Hydroxide SAT 150 SAT 190 Ammonium Carbonate SAT 150 Magnesium Nitrate SAT 140 SAT 180 Ammonium Bicarbonate SAT 130 Magnesium Sulfate SAT 170 SAT 190 Ammonium Nitrate SAT 160 SAT 190 Mercuric Chloride SAT 150 SAT 190 Ammonium Persulfate SAT SAT 150 Mercurous Chloride SAT 140 SAT 180 Ammonium Sulfate SAT 170 SAT 200 Mineral Oils Amyl Alcohol ALL ALL 90 Naptha Amyl Alcohol Vapor Nickel Chloride SAT 170 SAT 200 Benzene Sulfonic Acid SAT 200 Nickel Nitrate SAT 170 SAT 200 Benzoic Acid SAT 150 SAT 200 Nickel Sulfate SAT 170 SAT 200 Benzoly Alcohol Nitric Acid Borax SAT 170 SAT 200 Nitric Acid Calcium Carbonate SAT 170 SAT 200 Oleic Acid Calcium Chloride SAT 170 SAT 200 Oxalic Acid ALL 75 ALL 200 Calcium Hydroxide Paper Mill Liquors Calcium Nitrate SAT 180 SAT 200 Perchlorethylene Calcium Sulfate SAT 180 SAT 200 Perchloric Acid Carbon Disulfide Perchloric Acid Carbonic Acid SAT 130 SAT 180 Phosphoric Acid Carbon Dioxide Gas Phosphonic Acid Carbon Monoxide Gas Potassium Aluminium Sulfate SAT 170 SAT 200 Carton Tetrachloride Potassium Bicarbonate Chlorine, Dry Gas Potassium Carbonate Chlorine, Wet Gas Potassium Chloride SAT 170 SAT 200 Chlorine Water SAT SAT 90 Potassium Dichromate SAT 170 SAT 200 Chromic Acid Potassium Hydroxide Citric Acid SAT 170 SAT 200 Potassium Nitrate SAT 170 SAT 200 Copper Chloride SAT 170 SAT 200 Potassium Permangante SAT 75 SAT 200 Copper Cyanide SAT 170 SAT 200 Potassium Sulfate SAT 170 SAT 200 Copper Nitrate SAT 170 SAT 200 Propylene Glycol ALL 170 ALL 200 Crude Oil, Sour Phthalic Acid SAT 200 Cyclohexane, Vapor ALL 100 ALL 130 Sodium Acetate SAT 160 SAT 200 Diesel Fuel Sodium Benzoate SAT 170 SAT 200 Diethyl Ether Sodium Bicarbonate SAT 160 SAT 175 Dimethyl Phthalate Sodium Bisulfate ALL 170 ALL 200 Ethanol Sodium Bromide ALL 170 ALL 200 Ethyl Acetate Sodium Carbonate Ethylene Chloride Sodium Chloride SAT 170 SAT 200 Ethylene Glycol Sodium Cyanide SAT 170 SAT 200 Fatty Acids SAT 180 SAT 200 Sodium Hydroxide Ferric Chloride SAT 170 SAT 200 Sodium Hydroxide Ferric Nitrate SAT 170 SAT 200 Sodium Hypochlorite Ferric Sulfate SAT 170 SAT 200 Sodium Monophosphate SAT 170 SAT 200 Ferrous Chloride SAT 170 SAT 200 Sodium Nitrate SAT 170 SAT 200 Fluoboric Acid SAT 165 Sodium Sulfate SAT 170 SAT 200 Fluosilicic Acid SAT 75 Sodium Thiosulfate ALL 100 ALL 120 Formaldehyde Stannic Chloride SAT 160 SAT 190 Formic Acid Sulfated Detergent 0/ / Gasoline Sulfur Dioxide Glucose Sulfur Trioxide Glycerine Sulfuric Acid N/R Heptane Sulfuric Acid Hexane Sulfuric Acid Hydrobromic Acid Sulfurous Acid 80 Hydrobromic Acid Tartaric Acid Hydrobromic Acid Tetrachloroethylene Hydrobromic Acid Toluene Hydrobromic Acid Trisodium Phosphate SAT 175 Hydrogen Bromide, Dry Urea SAT 130 SAT 140 Hydrogen Bromide, Wet Vinegar Hydrogen Chloride Water, Distilled Hydrogen Peroxide Water, Tap Hydrogen Sulfide, Dry 140 ALL 180 Water, Sea Hydrogen Sulfide, Wet V 140 V 180 Zinc Chloride SAT 170 SAT 200 Hypochlorous Acid Zinc Nitrate SAT 170 SAT 200 Isopropyl Alcohol Zinc Sulfate SAT 170 SAT 200 Kerosene LEGEND: SAT - SATURATED, - NOT AVALIABLE, - NOT RECOMMENDED, V - VAPOURS 25

26 INSTALLATION GUIDE Six of the best points for a safe installation: 1. Carefully read the MSD Sheet on the resin system you are using, Contact Oglaend System for your copy. People with respiratory problems should not be exposed to dust created by FRP products. 2. Observe common safety precautions when using cutting tools. Always wear gloves, safety glasses or goggles and a respirator (mask) to reduce inhalation of dust. We recommend the use of approved masks only. 3. Dust from cutting FRP products can cause skin irritation. Wear clothing to reduce dust from contacting with skin. If dust causes difficulty in breathing or excessive skin irritation, stop immediately and consult a doctor. 4. Take care when using the resin sealing pack. Carefully read and follow the instructions enclosed in the resin pack prior to use. Always wear safety glasses and protective clothing when working with FRP products or resins. Do not allow resin or catalyst to come in contact with skin. 5. When possible, try to cut or modify «on-site» this will increase accuracy and reduce waste and always allow (5mm) for the blade thickness when cutting. 6. To maintain the long service life Oglaend System s products are known for always seal the cut ends with an approved sealing resin pack from Oglaend System. WARNING! Not to be used as a walkway, ladder or support for personnel. To be used only as a mechanical support for cables and tubing. Cable ladders are designed as a support for power or control cables, or both and is not intended or designed to be a walkway for personnel. NEMA FG-1 Installation of Oglaend System fiberglass ladder & trays should be made in accordance with the standards set by NEMA Publication FG-1, Cable Ladder Installation Guide, and National Electrical Code, Article 318. Always observe common safety practices when assembling ladder and fittings. Installations usually require some field cutting. Dust created during fabrication presents no serious health hazard, but skin irritation may be experienced by some workers. Operators of saws and drills should wear masks, long sleeve shirts or coveralls. Fabrication with fiberglass is relatively easy and comparable to working with wood. Ordinary hand tools may be used in most cases. Avoid excessive pressure when sawing or drilling. Too much force can rapidly dull tools and also produce excessive heat which softens the bonding resin in the fiberglass resulting in a ragged edge rather than a clean-cut edge. Field cutting is simple and can be accomplished with a Jig saw or a circular power saw with abrasive cut-off wheel (masonry type) carbide gritted or diamond tip blade or hack saw. Drill fiberglass as you would drill hard wood. Standard twist drills are more than adequate. Any surface that has been drilled, cut, sanded or otherwise exposed to the elements must be sealed with a suitable resin. This is recommended to prevent corrosive chemicals from reaching exposed glass fibers. Carbide tipped saw blades and drill bits are recommended when cutting large quantities. Support the fiberglass material firmly during cutting operations to keep material from shifting which may cause chipping at the cut edge. Each ladder section length should be equal to or greater than the support span.-when possible, the splice should be located at quarter span. Fittings should be supported as per NEMA FG-1. 26

27 SUPPORT LOCATIONS - Cable Tray & Fittings (REFERENCE: NEMA FG - 1 (current issue) Straight Sections Supports must be located so that connectors (splice joints) between horizontal runs fall between the support point and the quarter point of the span. STRAIGHT REDUCER FIG. SPLICE AT L/4 LENGTH OF SPAN = L IN MULTIPLE SPAN CONDITION SPLICE AT L/4 SUPPORT SUPPORT Standard engineering practice requires that the splice joints be located where they will resist little or no bending moment. This allows the cable tray system to act as a continuous member with spans working in conjunction with one another to resist loading. When a cable tray system is installed with the splice joints located directly over the support, the previous continuous span condition is changed to one of a number of simple spans. These spans act independently of each other and excessive stress will occur at substantially less loading. Vertical straight lengths should be supported at intervals dictated by the building structure not exceeding 24 Ft. on centers. A support should be located 2 Ft. on each side of an expansion connection. Horizontal Fitting Supports Supports should be placed within 2 Ft. (.61m) of each fitting extremity, and as follows: 90 degree supports at the 45 degree point of the arc, 45 degree supports at the 22.5 degree point of the arc (except for the 12 radii), 30 degree supports at the 15 degree point of the arc (except for the 12 radii). HORIZONTAL ELBOWS FIG. OFFSET REDUCER FIG. Reducer Fitting Supports Straight reducer and right/left hand reducer fittings should be supported within 2 Ft. (.61m) of each fitting extremity. HORIZONTAL CROSS FIG. Horizontal Cross Supports Supports should be placed within 2 Ft. (.61m) of the four openings connected to other cable tray items for the 12 (305mm) radius. On all other radii, at least one support should also be placed under each side rail of the cross. VERTCAL ELBOWS FIG. Vertical Fitting Supports Vertical fittings at the top runs should be supported at each end. Fittings at the bottom of runs should be supported at the top of the fitting, and within 2 Ft. (.61m) of the lower extremity of the fitting. Vertical fittings at the top runs should be supported at each end. Fittings at the bottom of runs should be supported at the top of the fitting, and within 2 Ft. (.61m) of the lower extremity of the fitting. Vertical Tee Supports VERTICAL TEE FIG. Vertical tee fittings should be supported within 2 Ft. (.61m) of each fitting extremity. Horizontal Tee Supports Supports should be placed within 2 Ft. (.61m) of each of the three openings connected to other cable tray items for 12 (305mm) radius. On all other radii, at least one support should also be placed under each side rail of the tee. HORIZONTAL TEE FIG. 27

28 PROFILES AVAILABLE: SIZE (In mm.) SHAPE Stocked Product Kg/m Resin Resin PART Items Type PRFR VEFR NO. SUPPORT CHANNEL Type: S-UNO CH-41-1-U x 42.0 x 3.0 Gap 22. P 0, EQUAL LEG ANGLES 50.8 x 50.8 x 6.35 P 1, x 50.8 x 3.20 P 0, CHANNELS 52.0 x 25.0 x 3.0 P 0, FLAT SHEET x 4.5 P 2, x 5.5 P x 3000 x 3mm CL SQUARE TUBE 76.2 x 76.2 x 6.35 P 3, x 50.8 x 6.35 P 2, x 50.8 x 3.20 P 1, ROUND TUBE 32.0 x2.5 P 0, x 3.0 P 0, x 4 P 1, ROUND ROD 7.9 OD P 0, OD P 0, Avaliable in( PRFR) Polyester and (VEFR) Vinyl Ester. Avaliable in 3 and 6mt lengths except where noted. Avalible resin system Stocked Item P = Pultruded CL= Continous Laminating Insert PA or VE after part number TYPICAL COUPON PROPERTIES Typical coupon properties of Qglaend System Reinforced Plastics structural fiberglass profiles (Standard,Poyester & Vinylester fire retardant shapes). Properties derived per the ASTM test method. Surface veil and ultraviolet inhibitors are standard in all profile. Mechanical Properties ASTM Units PE VE Tensile Stress, LW D-638 psi 30,000 35,000 Tensile Stress, CW D-638 psi 7,000 10,000 Tensile Modulus, LW D psi Tensile Modulus, CW D psi Compressive Stress, LW D-695 psi 30,000 35,000 Compressive Stress, CW D-695 psi 15,000 20,000 Compressive Modulus, LW D psi Compressive Modulus, CW D psi Flexural Stress, LW D-790 psi 30,000 35,000 Flexural Stress, CW D-790 psi 10,000 14,000 Flexural Modulus, LW D psi Flexural Modulus, CW D psi Modulus of Elasticity, E Full 10 6 psi Section Shear Modulus 10 6 psi Short Beam Shear D-2344 psi 4,500 4,800 Punch Shear D-732 psi 10,000 10,000 Notched Izod Impact, LW D-256 ft-lbs/in Notched Izod Impact, CW D-256 Physical Properties ASTM Units PE VE Barcol Hardness D Hour Water Absorption D-570 % max Density D-792 lbs./in Coefficient of Thermal Expansion, LW D in/ C Electrical Properties ASTM Units PE VE Arc Resistance, LW D-495 seconds Dielectric Strength, LW D-149 kv./in Dielectric Strength, PF D-149 volts/mil Dielectric Constant, PF D hz 8 8 Fire Retardant Polyester and Fire Retardant Vinylester Structural Profiles: Flammability Properties ASTM Units PE VE Tunnel Test E-84 Flame 25 max. 25 max. Spread Flammability D-635 Non- Nonburning burning 28

29 LOCKING SCREWS With pan head and flange nuts Self-Lock only in SS LOCKING SCREWS HEXAGONAL SCREWS Other lengths in DIN 931 partly thread. PAN HEAD SCREWS FLANGE NUTS *) Self-Lock only in SS M6, M8, M10 NUTS WASHERS STAR WASHERS EXPANSION BOLTS Qualities: V.G. = 5,8 S.S. = A4-70 P.G. = 5,8 EXPANSION BOLT for steel REMEMBER: Screws are included! Normally supplied from stock. HDG SS SCREWS TYPE STD. packs Art. no. Art. no. M 6 x 12 Type: MK B M 6 x 20 Type: MK B M 6 x 30 Type: MK M10 x 20 Type: MK M10 x 25 Type: MK M10 x 50 Type: MK M 6 x 12 DIN M 6 x 25 DIN M 6 x 50 DIN M10 x 20 DIN M10 x 25 DIN M 6 x 10 DIN M 6 x 12 DIN M 6 x 16 DIN M 6 x 20 DIN M 6 x 30 DIN M 8 x 20 DIN M 8 x 25 DIN M 8 x 30 DIN M10 x 16 DIN M10 x 20 DIN M10 x 25 DIN M10 x 35 DIN M10 x 50 DIN M10 x 55 DIN M12 x 25 DIN M12 x 45 DIN Tapered M10 x M 6 x 16 DIN M 6 x 20 DIN M 6 x 30 DIN M 6 x 40 DIN mm Flange nuts DIN * 8 mm Flange nuts DIN * 10 mm Flange nuts DIN * 12 mm Flange nuts DIN M 6 x 10 Nuts DIN M 6 x 13 Nuts DIN M 8 x 13 Nuts DIN M10 x 17 Nuts DIN M12 x 19 Nuts DIN Washers M 6 x 14 DIN Washers M 6 x 18 DIN Washers M 6 x 25 DIN Washers M 8 x 17 DIN Washers M10,5 x 21 DIN Washers M12 x 21 DIN Washers with 4-kt. hole, 11x1x 32mm Square Washers with 4-kt. hole, 7x2x 35mm 500 M 6 DIN M 8 DIN M10 DIN M12 DIN M 6 x 50 Type: MK 19-7D 100 M 8 x 50 Type: MK 19-7B M 8 x 65 Type: MK 19-7C M10 x 60 Type: MK 19-7B M10 x 80 Type: MK 19-7B M8-Split SELF-TAPPING SCREWS SELF-TAPPING SCREWS in packs of 100 PG 4,2 x 14mm Type: 34-PH. Inntil 3 mm stålplate / Up to 3 mm steelplate ,2 x 25mm Type: 36-PH. Inntil 3 mm stålplate / Up to 3 mm steelplate SELF-TAPPING STAINLESS STEEL SCREWS BITS: For up to 2,5mm thickness 4,8 x 13 mm MARUTEX Art. no For up to 2,5mm thickness 4,8 x 25 mm MARUTEX SPECIAL SCREWS FOR FRP PRODUCTS: Self-Tapping SS Screws FOR END PLATE 4,8 x 13 mm MARUTEX SM PS-M10x20 FOR FOE SPLICE Pan head with star and flange nuts SM LS-M6x16 FOR FTE SPLICE AND FOE COVER Locking with pan head and flange nuts SM PS-M6x20 Pan head with star SM PS-M8x SM PS-M8x

30 PRODUCT INFORMATION Oglaend System offer a broad range of cable support systems for all applications, i.e., cabie Iadders, cable trays, junction box racks, tubing clamps, trefoil cleats, heating cables, control systems, heating elements etc. Any questions? Don't hesitate to contact us! 30

31 LOCATIONS - ADDRESSES HOLDING COMPANY Øglænd lndustrier AS P.O. Box 133 N-4358 Kleppe Tel.: Fax: oglind@oglsys.no SUBSIDIARY Norway Øglænd System AS Head office/factory P.O. Box 133 N-4358 Kleppe Tel.: Fax: Fax sales office: oglaend@oglsys.no Dubai (Middle East) Oglaend Industries FZCO Tel.: Fax: Mobile: oglaendsys_me@xsmail.com The Netherlands Oglaend System BV Tel.: Fax: Emall: info@oglaend-system.nl Singapore (South East Asien) Oglaend System Singapore Pte. Ltd. Tel.: Fax: oglaend.system@pacific.net.sg Sweden Ögländ System AB Tel.: + 46 (0) Fax: + 46 (0) oglaend-system@oglsys.se UK Oglaend System UK Ltd. Tel.: Fax: oglaend.system@oglsys.co.uk Korea Oglaend System Korea Co Ltd Tel.: Fax: Emall: oglaend@oglaend-system.co.kr SALES OFFICES Norway Øglænd System AS, Oslo division: Tel.: Fax: Øglænd System AS, Ålesund divisjon: Tel.: Fax: Øglænd System AS, Trondheim division: Tel.: Fax: AGENTS - DlSTRlBUTORS Abu Dabi Proserv Albadie LLC Tel.: Fax: proserv@emirates.net.ae Australia J. T. Day Pty. Ltd. Tel.: Fax: enquiries@jtday.com.au Brazil M.O.TECH do Brazil Tel.: Fax: motech@motech.com.br Brunei Shinba Integrated Engineering services Tel.: Fax: info@ies.com.bn Canada Apel/CSA Enterprises Tel.: Fax: urquhart@csarep.com Denmark Solar AS Tel.: Fax: Dubai Sentor Tel.: Fax: sentor@emirates.net.ae Finland Elmarino - Shipping OY Tel.: Fax: Iceland Smith & Norland Tel.: Fax: sminor@sminor.is lndonesia PT. Multi Tarex MuIia Tel.: Fax: agus@multitarex.co.id Italy Chemit Srl. Tel.: Fax: sales.electrical@chemit.it Web: Malaysia Esteem Link (Letrik Utama) SND BHD Tel.: , Fax: ellusb@tm.net.my Scotland Hydrasun Ltd. Tel.: Fax: Thailand Spirit Intertrade Co LTD Tel: Fax: dilok@spirit.in.th USA (Texas and Louisiana) Source lec Tel.: Fax: bob.johnson@sourceiec.com Qatar Petrofac Qatar Tel.: Fax: pfacq@qatar.net.qa Vietnam MT Corporatin Tel: Fax: mail@mt-co.com * X X X * HEAD OFFICE AND FACTORY SUBSIDIARIES AGENTS DISTRIBUTORS SALES OFFICES X FABRICATION FACILITY 31

32 SIMPLY THE BEST! This has been our motto since the company was founded in By living up to the motto we have become the market leader in our field worldwide. Oglaend System has always been a front runner in our field. Our goal is to develope systems that are better, simpler and more economic overall. ADS 1. Konsern/Holding company Øglænd Industrier AS, P.O. box 133, N-4358 Kleppe, Tel.: , Fax: (47) Datterselskap/Subsidiary Øglænd System AS Hovedkontor fabrikk/head Office factory: P.O. box 133, N-4358 Kleppe, Tel.: , Fax: (47) Fax sales office: oglaend@oglsys.no 04.06