1N 0.102kgf lbs. 1mm inch

Size: px
Start display at page:

Download "1N 0.102kgf lbs. 1mm inch"

Transcription

1

2 1 2

3 3

4 10.102kgf0.228lbs inch

5 kgf0.228lbs inch 8

6 kgf0.228lbs inch 10

7 Identification number The specification of Linear Roller Way Super X is indicated by the identification number, consisting of a model code, a size, a part code, a material symbol, a preload symbol, a classification symbol, an interchangeable code, and any supplemental codes. qseries Flange type mounted from both the upper/lower sideslrx 1 Block type mounted from the upper side LRXD For available models and sizes, see Table 1. For the model code of a single track rail of interchangeable specification, indicate LRX. Compact block type mounted from the upper sidelrxs ote 1 The size models can be mounted from the upper side only. For mounting from the lower side, LRXH can be used. specification Slide unit Track rail Assembled set on-interchangeable specification Assembled set qseries wlength of slide unit Model code LRX C 3 C1 T2 P S2 / Z LRX 3 R0 P S2 / F LRX C 3 C1 R0 T2 P S2 / FZ LRX C 3 C1 R0 T2 P / FZ wlength of slide unit esize of rolling guide rumber of slide units Short Standard High rigidity long C o symbol G 10,, 1,, 2,, 3,,,, 8, 100 Table 1 Models and sizes of Linear Roller Way Super X Material High carbon steel made Stainless steel made Shape Flange type Block type Compact block Block type For available models and sizes, see Table 1. For available models and sizes, see Table 1. Model Size LRXC LRX LRXG LRXDC LRXD LRXDG LRXSC LRXS LRXSG LRXDCSL Remark indicates that interchangeable specification product is available. LRXD SL LRXDGSL Assembled set Slide unit C C1 For an assembled set, indicate the number of slide units assembled on one track rail. For a slide unit only, indicate by C1. esize of rolling guide Size tlength of track rail Assembled set Track rail R R Indicate the length of track rail in. For standard and maximum lengths, see Table 17.1 on page 27 and Table 17.2 on page 28. rumber of slide units ymaterial High carbon steel made o symbol Stainless steel made SL For available models and sizes, see Table 1. tlength of track rail Part code upreload Standard Light preload Medium preload Heavy preload o symbol T1 T2 T3 Specify this item for an assembled set or a slide unit. ote that, for the slide unit of interchangeable specification, the preload amount that can be specified differs depending on the size. For details of preload amount, see Table 3 on page 13. ymaterial upreload Material symbol Preload symbol iaccuracy class High Precision Super precision Ultra precision H P SP UP The super precision classspand the ultra precision classupapply to the non-interchangeable specification products. In case of interchangeable specification products, assemble track rails and slide units of the same accuracy class. For details of accuracy, see Table 2 on page 13. iaccuracy class Classification symbol o code specification S2 Specify this item for interchangeable specification products. Assemble track rails and slide units with the interchangeable code. o!0optional specifications code Supplemental code!0optional specifications A, D,, F, G, HP,, J, L, LF, M,, PS, Q, T, V, W, Y, Z For applicable special specifications, see Table on page kgf0.228lbs inch

8 Accuracy Preload Optional Specifications Accuracy of Linear Roller Way Super X is shown in Table 2. Table 2 Accuracy C H A D Classification Symbol Item Dim. H tolerance Dim. tolerance Dim. variation of H 2 Dim. variation of 2 Dim. variation of H for multiple assembled sets 3 Parallelism in operation of C to A Parallelism in operation of D to B B High Precision Super 1 precision Ultra 1 precision H P SP UP See Fig. 1. See Fig ote 1 Applicable to the non-interchangeable specification products. 2 Variation between slide units mounted on the same track rail 3 Applicable to the interchangeable specification products. Parallelis Length of track raill HighH PrecisionP Super precisionsp Ultra precisionup Fig. 1 Parallelism in operation unit The average amount of preload for Linear Roller Way Super X is shown in Table 3. For slide units of interchangeable specification, the type of preload that can be specified differs depending on the size. The applicable preload types for each size are shown in Table. When both rigidity and vibration characteristics are important, the standard preload amount is 1/2 of the applied load. Table 3 Preload amount Preload type Item Symbol Preload amount Standard o symbol 0 1 Light preload Medium preload 2 Heavy preload 2 T1 0.02C0 T2 0.0C0 T3 0.08C0 ote 1 Zero or minimal amount of preload 2 ot applicable to size 10LRXD10SL. RemarkC0 means the basic static load rating. Table Preload type Preload type LRXD 10SL LRX LRX 1 LRX LRX 2 LRX LRX 3 LRX LRX LRX LRX 8 LRXG 100 Standard o symbol Light preload T1 Application Smooth and precise motion Minimum vibration Load is evenly balanced. Smooth and precise motion Medium vibration Medium overhung load Vibration and/or shocks Large overhung load Heavy cutting Medium preload T2 Heavy preload T3 Remark 1The mark indicates that interchangeable specification products are available. 2The above table shows representative model numbers and is also applicable to all models in the same size. Linear Roller Way Super X optional specifications for are shown in Table. When a optional specification is required, add the applicable supplemental code to the end of the identification number. Table Optional specifications Optional specification Supplemental specification on-interchangeable code Slide unit Track rail Assembled set specification Butt-jointing track rails A Opposite reference surfaces arrangement D Specified rail mounting hole positions Caps for rail mounting holes F 2 Changed pitch of slide unit middle mounting holes G Half pitch of track rail mounting holes HP 2 Inspection sheet Female threads for bellows J Black chrome surface treatment L 2 Fluorine black chrome surface treatment LF 2 Without track rail mounting bolts M o end seal Rail cover plate for track rail PS 8 Capillary plates Q Butt-jointing interchangeable track rail T Double end seals V 2 Matched sets to be used as an assembled group W Specified grease Y Scrapers Z 2 ote 1 Applicable to LRX, LRXG, LRXH and LRXHG. 2 ot applicable to size 10 models.lrxd10sl 3 ot applicable to size models. ot applicable to size 8 models. Table Combination of supplemental codes When a combination of multiple optional specifications is requiredsee Table, arrange their supplemental codes in alphabetical order. ot applicable to size 100 models. ot applicable to stainless steel models. 7 ot applicable to size,, 8 and 100 models. 8 Applicable to size 3, and models. D F G HP Remark 1The mark indicates that the combination can be made. 2The mark indicates that interchangeable specification products are available. J 3The mark indicates that this combination cannot be made. L If the marks are required, please consult. If a combination of special specifications is required, indicate the LF supplemental codes in alphabetical order. M PS Q T V W Y Z A D F G HP J L LF M PS Q T V W Y kgf0.228lbs inch 13 1

9 Butt-jointing track rails A -A1 -A1 -A2 -A2 With caps for rail mounting holes F Cap Synthetic resin made With female threads for bellowsfor single slide unit or track rail J JR JL Female threads for bellows -B1 -B1 -B2 -B2 When the required length of non-interchangeable specification track rail exceeds the maximum length indicated in Table 1, two or more track rails can be used by butt-jointing in the direction of linear motion. For the length and the number of butt-jointing track rails, consult for further information. Specially prepared caps for track rail mounting holes are appended. These caps cover the track rail mounting holes to improve the sealing performance in the linear motion direction. Aluminum caps are also available. Consult for further information. Changed pitch of slide unit middle mounting holes G Slide unit Track rail Female threads for mounting bellows are provided on the interchangeable slide unit or the interchangeable track rail. For details of related dimensions, see Table 9.1 and 9.2. qj Female threads are provided at both ends of the slide unit or the track rail. wjr Female threads are provided at the right end of the slide unit in sight of mark. ejl Female threads are provided at the left end of the slide unit in sight of mark. Opposite reference surfaces arrangement Reference mounting surface of slide unit D L 2 L 2 L With female threads for bellowsfor assembled set J JJ JR JS JJS Female threads for bellows Reference mounting surface of track rail The reference mounting surface of track rail is made opposite to the standard side. The accuracy of dimension including parallelism in operation is the same as that of standard specification. Specified rail mounting hole positions The pitch length between the two middle mounting holes of slide unit is changed. For this dimension, see Table 7. Half pitch of track rail mounting holes F HP Female threads for bellows For an assembled set of interchangeable or noninterchangeable specification, female threads for mounting bellows are provided on the slide unit and the track rail. For details of related dimensions, see Table 9.1 and 9.2. qj Female threads are provided at both ends of the track rail, and at the slide unit ends which are the closest to the track rail ends.in case only one slide unit is assembled, female threads are provided at both ends. wjj Female threads are provided at both ends of the track rail, and at all ends of all slide units.applicable, when the number of slide units is two or more. In case only one slide unit is assembled, indicate /J. ejr Female threads are provided at both ends of the track rail. rjs Female threads are provided at the slide unit ends which are the closest to the track rail ends.in case only one slide unit is assembled, female threads are provided at both ends. tjjs Female threads are provided at all ends of all slide units. Applicable, when the number of slide units is two or more. In case only one slide unit is assembled, indicate /JS. mark The position of the first mounting hole from the left end of the track raildimension can be specified, When ordering, add the dimensionin after /. Dimension can be specified in a limited range. Consult for further information. /2 F/2 The pitch of the track rail mounting holes is changed to 1/2 of the dimension F of standard type. Track rail mounting bolts are appended in the same number as that of mounting holes. Inspection sheet The inspection sheet recording dimensions H and, dimensional variations of H and, and parallelism in operation of the slide unit is attached to each set. Black chrome surface treatment LC LR LCR A black permeable chrome film is formed to improve corrosion resistance. The surface is then coated with acrylic resin. qlc Treatment is applied to the casing. wlr Treatment is applied to the track rail. elcr Treatment is applied to the casing and the track rail. Fluorine black chrome surface treatment LFC LFR LFCR After forming a black permeable chrome film, the surface is coated with fluorine resin for further improvement in corrosion resistance. This treatment is also effective in preventing the adhesion of foreign substances on the surface. qlfc Treatment is applied to the casing. wlfr Treatment is applied to the track rail. elfcr Treatment is applied to the casing and the track rail kgf0.228lbs inch 1

10 Without track rail mounting bolts M Bolts for track rail mounting are not appended. Butt-jointing interchangeable track rail for interchangeable specification T Matched sets to be used as an assembled group W With scrapersfor assembled set Z ZZ Scraper H H o end seal nd pressure plate nd seals at the both ends of slide unit are replaced by end pressure platesnot in contact with the track railto reduce frictional resistance. The under seals are not assembled. This specification is not effective for dust protection. Rail cover plate Rail cover plate PS Track rail Snap fastener Slide unit The rail cover plate is delivered as assembled on the track rail. After mounting the track rail, the top surface of track rail is covered with a U-shaped thin stainless steel plate for further improvement in sealing performance. Standard end seals of the slide unit must be replaced with the special end seals. When mounting the cover plate, refer to the attached instruction manual for rail cover plate. A special interchangeable track rail of which both ends are finished for butt-jointing is provided. Use the track rails having the same interchangeable code for butt-jointing. For the non-interchangeable specification, indicate butt-jointing track rail /A. With double end sealsfor single slide unit V VR VL Double end seals are provided on the interchangeable slide unit for more effective dust protection. For the total length of the side unit with double end seals, see Table 8. qv Double end seals are provided at the both ends of the slide unit. wvr Double end seals are provided at the right end of the slide unit in sight of mark. evl Double end seals are provided at the left end of the slide unit in sight of mark. With double end sealsfor assembled set V nd seal VV Set Set For two or more sets of Linear Roller Way Super X used on the same plane, the dimensional variation of H of Linear Roller Way Super X is kept within the specified range. The dimensional variation of dimension H in matched sets is the same as that of a single set. When ordering, indicate the number of sets, which is always represented by the number of track rails, after /W. Specified grease YCG YCL YAF YBR YG The type of pre-packed grease in the slide unit can be changed by a supplemental code. qycg Low Dust Generation Grease for Clean nvironment CG2 is pre-packed. wycl Low Dust Generation Grease for Clean nvironment CGL is pre-packed. eyaf Anti-Frettig Corrosion Grease is pre-packed. rybr MOLYCOT BR2 Plus GreaseDow Corningis prepacked. tyg o grease is pre-packed. With scrapers for single slide unit Z ZR ZL Metal scrapers are provided on the slide units of assembled set of interchangeable specification or noninterchangeable specification. The scrapernon-contact typeis used to effectively remove large particles of dust or foreign matters adhering to the track rail. For the total length of the slide unit with scrapers, see Table 8. qz Scrapers are provided at the slide unit ends which are the closest to the ends of the track rail.in case only one slide unit is assembled, scrapers are provided at both ends. wzz Scrapers are provided at all ends of all slide units. Applicable, when the number of slide units is two or more. In case only one slide unit is assembled, indicate /Z. Table 7 Pitch of slide unit middle mounting holes Supplemental code /G L 2 L L2 L unit Capillary plates Q Capillary plate Capillary plates are assembled between casing and the end seals of the slide unit. They are impregnated with lubricant so that re-lubrication interval can be made longer. For the total length of the slide unit with capillary plates, see Table 8. Double end seals are provided on the slide unit of assembled set of interchangeable specification or noninterchangeable specification for more effective dust protection. For the total length of the slide unit with double end seals, see Table 8. qv Double end seals are provided at the slide unit ends which are the closest to the ends of the track rail.in case only one slide unit is assembled, double end seals are provided at both ends. wvv Double end seals are provided at all ends of all slide units.applicable, when the number of slide units is two or more. In case only one slide unit is assembled, indicate /V. Metal scrapers are provided on the slide unit of interchangeable specification. The scrapernon-contact typeis used to effectively remove large particles of dust or foreign matters adhering to the track rail. For the total length of the slide unit with scrapers, see Table 8. qz Scrapers are provided at both ends of the slide unit. wzr A scraper is provided at the right end of the slide unit in sight of mark. ezl A scraper is provided at the left end of the slide unit in sight of mark. LRX 1, LRXG 1 LRX, LRXG 1 LRX 2, LRXG 2 LRX, LRXG LRX 3, LRXG 3 LRX, LRXG LRX, LRXG LRX, LRXG LRXG ote 1 Also applicable to LRXH and LRXHG kgf0.228lbs inch 18

11 Table 8 Slide unit with capillary platessupplemental code /Q, with double end sealssupplemental code /V, and with scraperssupplemental code /Z Table 9.1 Female threads for bellowssupplemental code /J Size10,, 1,, 2, Size3,,,, 8, 100 Size 1,, 2, / Q Capillary plate L L1 Capillary plate / Q Capillary plate L1 Capillary plate b1 b2 2M 1depth H3 b1 b2 2M 1depth H3 Grease nipple 1 A-M3 L1 a1 a1 / V nd seal L L1 nd seal / V nd seal L1 nd seal D B 2M 2depth a3 a D B 2M 2depth a3 a a / Z Scraper With capillary plates Q L L1 With double end seals 1 V Scraper With scrapers 1 Z L1 L L1 L L1 L / Z Scraper With capillary plates Q L1 With double end seals 1 V Scraper LRXD 10SL 3. LRXC LRXC LRX LRX LRXG LRXG LRXC LRXC LRX LRX LRXG LRXG LRXC LRXC LRX LRX LRXG LRXG LRXC LRXC LRX LRX LRXG LRXG LRX LRXC LRXG LRX LRXG LRXG ote 1 The values for a slide unit with double end seals or scrapers at both ends are shown. RemarkThe above table shows representative model numbers and is also applicable to all models in the same size. unit With scrapers 1 Z L1 L1 L1 LRXC 1 LRX 1 LRXG 1 LRXDC 1 LRXD 1 LRXDG 1 LRXSC 1 LRXS 1 LRXSG 1 LRXC 2 LRX 2 LRXG 2 LRXDC LRXD LRXDG LRXSC LRXS LRXSG LRXC 2 LRX 2 LRXG 2 LRXDC 2 LRXD 2 LRXDG 2 LRXSC 2 LRXS 2 LRXSG 2 LRXC LRX LRXG LRXDC LRXD LRXDG LRXSC LRXS LRXSG Slide unit Track rail a1 b1 b2 M1depth L1 3 H3 a3 a M2depth M3 M3 M3 M3 ote 1 The specification and mounting position of grease nipple are different from those of the standard specification product. The grease nipple of the size models is A-M. For grease nipple specifications, see Table. 2 Also applicable to LRXHC, LRXH and LRXHG. 3 The values for a slide unit with female threads for bellows at both ends are shown. RemarkFor the size 1 and models of flange type and compact block type, the dimension a is higher than the dimension H of the assembly. For details, consult for further information unit M3 M8 M8 M kgf0.228lbs inch

12 Load Rating and Life Table 9.2 Female threads for bellowssupplemental code /J Basic dynamic load rating Conforming to ISO/FDIS C Size 3,,,, 8 b3 b b1 b2 a2 a1 a D B 2M 2depth M 1depth a3 a1 a2 D b3 b1 B b b2 2M 2depth M 1depth a a3 L1 The basic dynamic load rating is defined as the constant load both in direction and magnitude under which a group of identical Linear Roller Ways Super X are individually operated and 90 of those in the group can travel 0 x 10 3 meters free from material damage due to rolling contact fatigue. The dynamic load ratings of Linear Roller Way Super X are designed for equal load capacity in downward, upward and lateral directions. Basic static load rating C0 Conforming to ISO/FDIS Upward load Downward load Slide unit Track rail a1 a2 b1 b2 b3 b M1depth L1 1 a3 a M2depth LRXC 3 LRX 3 1 LRXG 3 LRXDC LRXD LRXDG 3 LRXC LRX LRXG LRXDC 0 7 LRXD LRXDG LRXC LRX LRXG LRXDC 0 88 LRXD LRXDG LRXC LRX LRXG LRXDC LRXD LRXDG LRX 8 LRXG ote 1 The values for the slide units with female threads for bellows at the both ends. M3 M 8 M 8 M10 M unit M 8 M10 M10 M M The basic static load rating is defined as the static load that gives a prescribed constant contact stress at the center of the contact area between the rolling element and raceway receiving the maximum load. It is the allowable limit load that permits normal rolling motion. Generally, the basic static load rating is used in combination with the static safety factor. The static load ratings of Linear Roller Way Super X are designed for equal load capacity in download, upward and lateral directions. Static moment rating T0TXTY The static moment rating is defined as the static moment load that gives a prescribed constant contact stress at the center of the contact area between the rolling element and raceway receiving the maximum load when a moment See Fig. 3.is loaded. It is the allowable limit moment that permits normal rolling motion. Generally, the static moment rating is used in combination with the static safety factor. T0 TX Fig. 2 Load direction TY Lateral load Fig. 3 Direction of static load rating kgf0.228lbs inch 21 22

13 Lubrication and Dust Protection Grease ipple Precautions for Use Life The rating life of Linear Roller Way Super X is obtained from the following formula. C L P where, LRating life10 3 m CBasic dynamic load rating PDynamic equivalent loador Applied load If the stroke length and the number or strokes per minute are known, the life in hours can be obtained from the following formula. 10 L Lh 2 2Sn10 where, LhRating life in hoursh S Stroke length n1umber of strokes per minutecpm Static safety factor The static safety factor of Linear Roller Way Super X is given in the following formula. where, C0 fs P0 Load factor 3 fs Static safety factor C0Basic static load rating P0Static equivalent loador Applied load Table 10 Static safety factor Operation with vibration and/or shocks High operating performance ormal operation Operating conditions Due to vibration and/or shocks during machine operation, the actual load on each rolling guide becomes greater in many cases than the theoretically calculated load. The applied load is generally calculated by multiplying the theoretically calculated load by the load factor indicated in Table 11. Table 11 Load factor Operating conditions fs fw A high quality lithium-soap base grease containing extremepressure additivesalvaia P Grease 2SHLLis pre-packed in Linear Roller Way Super X. However, the quality of any grease will gradually deteriorate as operating time passes. Therefore, periodic re-lubrication is necessary. The re-lubrication interval varies depending on the operating conditions of the rolling guides. A six month interval is generally recoended. If the machine operation consists of reciprocating motions with many cycles and long strokes, re-lubrication every three months is recoended. Re-lubrication is performed from a grease nipple provided on the slide unit. Re-lubrication interval can be extended by using the special specification Capillary Platesupplemental code /Q, by which re-lubrication and other maintenance works can be reduced. Linear Roller Way Super X is dust-protected with special rubber seals on slide unit. But, if large amounts of fine contaminants are present, or if large particles of foreign matters such as dust or chips may fall on the track rail, it is recoended to provide protective covers such as bellows or telescopic shields for the entire linear motion mechanism. Bellows to match the dimensions of Linear Roller Way Super X are optionally available from. They are easy to mount and highly effective for dust protection. If required, consult. Oil hole Size 10 of Linear Roller Way Super XLRXD10SLis provided with oil holes as shown in Fig.. For grease replacement, use a syringe type dispenser. The specially prepared miniature greaser is also available. Please consult if required Casing From size to 100 of Linear Roller Way Super X, grease nipples shown in Table are assembled to each slide unit. Table Grease nipple Type LRX AM3 LRX 1 AM LRX LRX 2 LRX LRX 3 LRX LRX LRX LRX 8 BM BM Grease nipple unit Shape and dimension Width across flats M3 Width across flats M 2.1 R3 Width across flats M R3 Approx. 7. quivalent to A-MF Width across flats8 M0.7 JIS AMF Approx. 7. JIS APT qmounting surface, reference mounting surface, and general mounting structure To mount Linear Roller Way Super X, correctly fit the reference mounting surfaces B and D of Linear Roller Way Super X to the reference mounting surfaces of the table and the bed, and then fix them tightly.see Fig.. The reference mounting surfaces B and D and mounting surfaces A and C of Linear Roller Way Super X are accurately finished by grinding. Stable and high accuracy linear motion can be obtained by finishing the mating mounting surfaces of machines or equipment with high accuracy and correctly mounting the guide on these surfaces. The slide unit reference mounting surface is always the side surface opposite to the mark. The track rail reference mounting surface is identified by locating the mark on the top surface of the track rail. The track rail reference mounting surface is the side surface above the markin the direction of the arrow.see Fig.. C A D B Fig. Reference mounting surfaces and general mounting structure Track rail Slide unit Reference mounting surface D B Smooth operation free from vibration and/or shocks ormal operation nd seal nd plate LRXG 100 JIS APT1 RemarkThe above table shows representative model numbers and is also applicable to all models in the same size. Operation with vibration and/or shocks 1.3 Fig. Size of oil hole in LRXD10SL mark mark Fig. Reference mounting surfaces kgf0.228lbs inch 2

14 Mounting wmounting of the slide unit xcept the size 10 and models, the slide unit is provided with one or two mounting thread holes in the middle of widthsee Fig. 7.so that an applied load can be received with good load balance. When designing machines or equipment, ensure that these middle mounting holes of the slide unit can be securely tightened to obtain maximum performance of the guide. It is recoended to secure the screwing depths shown in Table 13 for the slide units of compact block type. Middle mounting hole of the slide unit Fig. 7 Middle mounting hole of the slide unit Table 13 Screwing depth of slide unit mounting holes for compact block type LRXS 1 LRXS LRXS 2 LRXS Recoended minimum depth RemarkThe above table shows representative model numbers and is also applicable to all models in the same size. ecorner radius and shoulder height of reference mounting surfaces It is recoended to make a relieved fillet at the corner of the mating reference mounting surfaces as shown in Fig. 8. However, in some series, corner radius R shown in Table 1 can also be used. Table 1 shows recoended shoulder heights and corner radius of the mating reference mounting surfaces Table 1 Shoulder heights and corner radius of the mating reference mounting surfaces h1 R LRXD LRX LRX 1 LRX LRX 2 LRX LRX 3 LRX LRX LRX LRX 8 LRXG 100 R Slide unit 10SL Slide unit Shoulder height h2 R Track rail Shoulder height R Track rail Corner radius h1 h2 Rmax unit RemarkThe above table shows representative model numbers and is also applicable to all models in the same size. rmultiple slide units mounted in close distance When using multiple slide units in close distance to each other, actual load may be greater than the calculated load depending on the accuracy of the mounting surfaces and the reference mounting surfaces of the machine. It is suggested in such cases to assume a greater load than the calculated load. qwhen mounting multiple sets at the same time In case of interchangeable specification Linear Roller Way Super X, assemble a slide unit and a track rail with the same interchangeable code S2. In case of non-interchangeable specification Linear Roller Way Super X, use an assembly of slide unit and track rail as delivered without changing the combination. Special specification products of matched sets supplemental code /W are delivered as a group in which dimensional variations are specially controlled. Mount them without mixing with the sets of another group. wassembling slide unit and track rail When assembling a slide unit onto a track rail, correctly fit the grooves of the slide unit to the grooves of the track rail and move the slide unit gently in parallel direction. Rough handling will result in seal damage or dropping of cylindrical rollers. The interchangeable specification slide unit is provided with a duy rail. The size 10,, 1,, 2 and models of non-interchangeable specification are appended with a duy rail. This duy rail should be used for assembly. eaccuracy of mating mounting surfaces A load greater than the calculated load may act on Linear Roller Way Super X, depending on the accuracy of the mating mounting surfaces and assembling accuracy. This will eventually give an adverse effect on the service life of Linear Roller Way Super X. Therefore, the accuracy must be carefully examined. The accuracy of the mating mounting surfaces for track rail, slide unit and the assembling accuracy must be determined considering the operating conditions, required running accuracy and rigidity, etc. Also, the mounting structure must be examined to ensure accuracy and performance for reliable use of a linear motion rolling guide. When multiple sets are mounted, the parallelism between the two mounting surfaces of machines must be prepared, in general, as shown in Table 1. Table 1 Parallelism between two mounting surfaces Accuracy class High H Precision P Super precision SP unitm Ultra precision UP Parallelism 10 Fig. 9 Cleaning of mounting surfaces ttightening torque of mounting bolts The standard torque values for Linear Roller Way Super X mounting bolts are shown in Table 1. When machines or equipment are subjected to severe vibration, shock, large fluctuating load or moment load, the bolts should be tightened with a torque 1.2 to 1. times higher than the standard torque values shown. When the mating member material is cast iron or aluminum, tightening torque should be lowered in accordance with the strength characteristics of the material. Table 1 Tightening torque of mounting bolts Bolt size M 2.0. M 3 M M M M 8 M10 M M1 M Tightening torque -m Carbon steel bolt Stainless steel bolt Strength division.9 Property division A Fig. 8 Relieved fillet at the corner of the mating reference mounting surfaces toperating temperature The maximum operating temperature is 1C and a continuous operation is possible at temperatures up to 100 C. If the operation temperature may exceed 100C, consult. For the with capillary plates supplemental code /Q of special specification, operate Linear Roller Way Super X below 80C. rcleaning of mounting surfaces Before assembling Linear Roller Way Super X, remove burrs and blemishes from the reference mounting surfaces and mounting surfaces of the machine using an oil-stone, etc., and wipe off rust prevention oil and dirt with clean cloth. M M2 M RemarkTightening torque for slide unit center mounting holes on flange typelrxc, LRX, LRXGsize 1,, 2,, and 3, are, recoended to be tightened with a torque 70 to 80% values of Table kgf0.228lbs inch 2

15 Track Rail Length Standard and maximum lengths of track rails of Linear Roller Way Super X are shown in Table 17.1 and Track rails in any length are also available. Simply indicate the necessary track rail length in in the identification number. For non-interchangeable track rails longer than the maximum length shown in Table 17.1 and 17.2, buttjointing track rails are available upon request. In this case, indicate /A in the identification number. dimensions at the both ends are the same unless otherwise specified. To change these dimensions, specify the specified rail mounting hole positionssupplemental code / of optional specification. Table 17.2 Standard and maximum lengths of stainless steel track rails number of mounting holes F L Table 17.1 Standard and maximum lengths of high carbon steel track rails Item Standard length Standard length Ln Pitch of mounting holes Standard range of Maximum length 2 Item Ln Pitch of mounting holes Standard range of F incl. 1 under Maximum length 2 F incl. 1 under LRX number of mounting holes F 0 1 L LRX 1 LRX LRX 2 LRX LRX LRX LRX LRX LRX 8 LRXG unit ote 1 ot applicable to the track rail with female threads for bellowssupplemental code /J 2 Track rails with the maximum lengths shown in parentheses can also be manufactured. Consult for further information. 3 LRX8 track rail maximum length of half pitchsupplemental code/hpis RemarkThe above table shows representative model numbers and is also applicable to all high carbon steel track rails in the same size. Item Standard length Pitch of mounting holes Standard range of Ln F incl. 1 under Maximum length 2 LRXD 10SL LRX SL LRX 1SL LRX SL LRX 2SL LRX SL ote 1 ot applicable to the track rail with female threads for bellowssupplemental code /J 2 Track rails with the maximum lengths shown in parentheses can also be manufactured. Consult for further information. RemarkThe above table shows representative model numbers and is also applicable to all stainless steel track rails in the same size. unit kgf0.228lbs inch 28

16 Linear Roller Way Super X Flange type mounted from the upper/lower side LRXCLRXLRXG W d1 W2 W3 H3 W d1 W3 H W2 W3 H3 3M1 2M1LRXC d L L1 L3 L L1 L3 L2 M1 M1 LRX LRXG H1 H1 H H H h H2 H2 10 LRXC LRX LRXG LRXC 1 LRX 1 LRXG 1 LRXC 1 LRX 1 LRXG 1 LRXC 2 LRX 2 LRXG 2 LRXC LRX LRXG W LRXC LRX LRXG MassRef. Slide unit kg Track rail kgm Dimensions of assembly W LRXHC LRXH LRXHG Models mounted from the lower side only 1 ote 1 LRXC, LRX, and LRXG can be mounted from the upper side only. For mounting from the lower side, LRXHC, LRXH, and LRXHG which have the same dimensions as those of the above models can be used. 2 Track rail lengths L are shown in Table The directions of basic dynamic load ratingc, basic static load ratingc0, and static moment ratingt0, TX, TYare shown in the sketches below. The upper values in the TX and TY columns apply to one slide unit, and the lower values apply to two slide units in close contact. Remark 1The mark indicates that interchangeable specification products are available. 2The appended track rail mounting bolts are hexagon socket head bolts of JIS B 117 or equivalent. 3For grease nipple specifications, see Table. A grease nipple mounting thread is provided on the left and right end plates respectively Dimensions of slide unit H H1 W2 W3 W L1 L2 L3 L d1 M1 H2 H3 H M M M M 8 M10 C, C0 T0 TX TY d3 Dimensions of track rail F W H d3 d h F Mounting bolt for track rail Bolt sizelength M3 M1 M M2 M828 LRXC LRXHC xample of identification number of assembled set L 2 Basic dynamic load rating 3 C Basic static load rating 3 C Static moment rating 3 T0 -m TX TY -m -m LRX C2 R80 T1 P S2 / F Size of rolling guide Preload amount Model code umber of slide units o symbol Standard LRXC Two slide units T1 Light preload LRX T2 Medium preload LRXG Length of track rail80 T3 Heavy preload Accuracy class H High P Precision SP Super precision UP Ultra precision code S2 specification o symbol on interchangeable specification LRXC LRX LRXG LRXC 1 LRX 1 LRXG 1 LRXC 1 LRX 1 LRXG 1 LRXC 2 LRX 2 LRXG 2 LRXC LRX LRXG Special specification Caps for rail mounting holes kgf0.228lbs inch

17 Linear Roller Way Super X Flange type mounted from the upper/lower side LRXCLRXLRXG d1 W H W3 W2 W3 L L1 L3 L2 L2/2 L2/2 9M1 d L L1 L3 3M1 L1 L3 L2 M1 L H1 H H h H2 H3 W LRXG 8, LRXG 100 d3 3 F LRXC L 1 LRXC 3 LRX 3 LRXG 3 LRXC LRX LRXG LRXC LRX LRXG LRXC LRX LRXG LRX 8 LRXG 8 LRXG 100 MassRef. Slide unit kg Track rail kgm Dimensions of assembly ote 1 Track rail lengths L are shown in Table The directions of basic dynamic load ratingc, basic static load ratingc0, and static moment ratingt0, TX, TYare shown in the sketches below. The upper values in the TX and TY columns apply to one slide unit, and the lower values apply to two slide units in close contact. 3 The track rail longer and equalthan 1000 of LRX8, LRXG8 and LRXG100 have several threaded holes for the purpuse of specified hanging bolt. Consult for details. Remark 1The mark indicates that interchangeable specification products are available. 2The appended track rail mounting bolts are hexagon socket head bolts of JIS B 117 or equivalent. 3For grease nipple specifications, see Table. Three grease nipple mounting threads are provided on the left and right end plates respectively Dimensions of slide unit H H1 W2 W3 W L1 L2 L3 L d1 M1 H2 H3 H H M10 M M1 M1 M M C, C0 T0 TX TY Dimensions of track rail xample of identification number of assembled set LRX C2 R00 T2 P S2 / F Model code LRXC LRX LRXG Size of rolling guide W H d3 d h F M M M M M M80 umber of slide units Two slide units Mounting bolt for track rail Bolt sizelength Length of track rail00 Basic dynamic load rating 2 C C0 T0 -m Preload amount o symbol Standard T1 Light preload T2 Medium preload T3 Heavy preload Basic static load rating 2 Accuracy class H High P Precision SP Super precision UP Ultra precision Static moment rating 2 TX TY -m -m code S2 specification o symbol on interchangeable specification LRXC 3 LRX 3 LRXG 3 LRXC LRX LRXG LRXC LRX LRXG LRXC LRX LRXG LRX 8 LRXG 8 LRXG 100 Special specification Caps for rail mounting holes kgf0.228lbs inch 32

18 Linear Roller Way Super X Block type mounted from the upper side LRXDCLRXDLRXDG W W2 W3 Oil hole W W2 W3 W W2 W3 W3 3M1depth 2M1depthLRXDC d L L1 L3 L L1 L3 L2 M1depth M1depth LRXD 10SL LRXD LRXDG H H H1 H H1 H H1 h H3 H3 H3 W LRXD 10SL W LRXDC LRXD LRXDG LRXD 10SL M LRXDC LRXDC SL LRXD LRXD SL LRXDG LRXDG SL LRXDC 1 LRXDC 1SL LRXD 1 LRXD 1SL LRXDG 1 LRXDG 1SL LRXDC LRXDC SL LRXD LRXD SL LRXDG LRXDG SL LRXDC 2 LRXDC 2SL LRXD 2 LRXD 2SL LRXDG 2 LRXDG 2SL LRXDC LRXDC SL LRXD LRXD SL LRXDG LRXDG SL MassRef. Slide unit kg Track rail kgm Dimensions of assembly Dimensions of slide unit H H1 W2 W3 W L1 L2 L3 L M1depth H ote 1 Track rail lengths L are shown in Table 17.1 and The directions of basic dynamic load ratingc, basic static load ratingc0, and static moment ratingt0, TX, TYare shown in the sketches below. The upper values in the TX and TY columns apply to one slide unit, and the lower values apply to two slide units in close contact. Remark 1The mark indicates that interchangeable specification products are available. 2The appended track rail mounting bolts are hexagon socket head bolts of JIS B 117 or equivalent. For stainless steel series Linear Roller Way Super X, stainless steel bolts are appended. 3For grease nipple specifications, see Table. A grease nipple mounting thread is provided on the left and right end plates respectively C, C0 T0 TX TY W M. M 8 M 8 M M W kgf0.228lbs inch 33 3 Model code LRXDC LRXD LRXDG M M M M2 d3 Dimensions of track rail M M828 F LRXDC xample of identification number of assembled set LRXD C2 R80 SL T1 P S2 / F Size of rolling guide H d3 d h F umber of slide units Two slide units Mounting bolt for track rail Bolt sizelength Length of track rail80 Material High carbon steel madeo symbol Stainless steel madesl L 1 Basic Basic dynamic load static load rating 2 rating 2 C C Preload amount o symbol Standard T1 Light preload T2 Medium preload T3 Heavy preload Static moment rating 2 T0 -m TX Accuracy class H High P Precision SP Super precision UP Ultra precision TY -m -m code S2 specification o symbol on interchangeable specification Special specification Caps for rail mounting holes LRXD 10SL LRXDC LRXDC SL LRXD LRXD SL LRXDG LRXDG SL LRXDC 1 LRXDC 1SL LRXD 1 LRXD 1SL LRXDG 1 LRXDG 1SL LRXDC LRXDC SL LRXD LRXD SL LRXDG LRXDG SL LRXDC 2 LRXDC 2SL LRXD 2 LRXD 2SL LRXDG 2 LRXDG 2SL LRXDC LRXDC SL LRXD LRXD SL LRXDG LRXDG SL

19 Linear Roller Way Super X Block type mounted from the upper side LRXDCLRXDLRXDG W W3 W1 W2 W3 d L L1 L3 3M1depth L1 L3 L2 M1depth L H1 H h H H3 W d3 F LRXDC L 1 LRXDC 3 LRXD 3 LRXDG 3 LRXDC LRXD LRXDG LRXDC LRXD LRXDG LRXDC LRXD LRXDG MassRef. Slide unit kg Track rail kgm Dimensions of assembly ote 1 Track rail lengths L are shown in Table The directions of basic dynamic load ratingc, basic static load ratingc0, and static moment ratingt0, TX, TYare shown in the sketches below. The upper values in the TX and TY columns apply to one slide unit, and the lower values apply to two slide units in close contact. Remark 1The mark indicates that interchangeable specification products are available. 2The appended track rail mounting bolts are hexagon socket head bolts of JIS B 117 or equivalent. 3For grease nipple specifications, see Table. Three grease nipple mounting threads are provided on the left and right end plates respectively Dimensions of slide unit H H1 W1 W2 W3 W L1 L2 L3 L M1depth C, C0 T0 TX TY 2. M 81 M10 M2 M H Dimensions of track rail M M M M10 Model code LRXDC LRXD LRXDG W H d3 d h F Size of rolling guide umber of slide units Two slide units Mounting bolt for track rail Bolt sizelength Length of track rail00 Basic Basic dynamic load static load rating 2 rating 2 C C0 T0 -m Static moment rating 2 TX TY -m -m LRXDC 3 LRXD 3 LRXDG 3 LRXDC LRXD LRXDG LRXDC LRXD LRXDG LRXDC LRXD LRXDG xample of identification number of assembled set LRXD C2 R00 T2 P S2 / F Preload amount o symbol Standard T1 Light preload T2 Medium preload T3 Heavy preload Accuracy class H High P Precision SP Super precision UP Ultra precision code S2 specification o symbol on interchangeable specification Special specification Caps for rail mounting holes kgf0.228lbs inch 3

20 Linear Roller Way Super X Compact block type mounted from the upper side LRXSCLRXSLRXSG 3M1depth L L1 L L1 M1depth W2 L3 L3 W W3 W3 H3 d L2 H H1 H h W d3 F LRXSC L 1 LRXSC 1 LRXS 1 LRXSG 1 LRXSC LRXS LRXSG LRXSC 2 LRXS 2 LRXSG 2 LRXSC LRXS LRXSG MassRef. Slide unit kg Track rail kgm Dimension of assembly Dimension of slide unit H H1 W2 W3 W L1 L2 L3 L M1depth 2 H M. M. M9 M811 ote 1 Track rail lengths L are shown in Table Recoended screwing depths are shown in Table The directions of basic dynamic load ratingc, basic static load ratingc0, and static moment ratingt0, TX, TYare shown in the sketches below. Remark 1The mark indicates that interchangeable specification products are available. 2Appended track rail mounting bolts are hexagon socket head bolts of JIS B 117 or equivalent. 3For grease nipple specifications, see Table. Three grease nipple mounting threads are provided on the left and right end plates respectively. 3.. W Dimensions of track rail H d3 d h F Mounting bolt for track rail Bolt sizelength M M M M828 Basic Basic dynamic load static load rating 3 rating 3 C C0 T0 -m Static moment rating 3 TX -m TY -m LRXSC 1 LRXS 1 LRXSG 1 LRXSC LRXS LRXSG LRXSC 2 LRXS 2 LRXSG 2 LRXSC LRXS LRXSG xample of identification number of assembled set LRXS C2 R80 T1 P S2 / F kgf C, C0 T0 TX TY Model code LRXSC LRXS LRXSG Side of rolling guide umber of slide units Two slide units Length of track rail80 Preload amount o symbol Standard T1 Light preload T2 Medium preload T3 Heavy preload Accuracy class H High P Precision SP Super precision UP Ultra precision code S2 specification o symbol on interchangeable specification Special specification Caps for rail mounting holes kgf0.228lbs inch 38

21 39 0

22 1 2

Advanced original design Four-row Roller Type

Advanced original design Four-row Roller Type Advanced original design our-row Roller Type Linear Roller Way Compact block type LRXS is newly introduced. Dimensional interchangeable with a ball type 1 2 Linear Roller Way Super X is a linear motion

More information

Linear Way F LWF Ⅱ 133 Ⅱ 134

Linear Way F LWF Ⅱ 133 Ⅱ 134 Linear Way F 33 34 Linear Way F umber and Specification xample of an identification The specification of series is indicated by the identification. Indicate the identification, consisting of a model, dimensions,

More information

C-Lube Linear Way MV

C-Lube Linear Way MV -Lube Linear Way 49 50 -Lube Maintenance Free Series -Lube Linear Way Long term maintenance free compliant! The aquamarine end plate is the symbol of maintenance free. Designation of Identification Number

More information

C-Lube Linear Way MUL Linear Way U MUL LWU

C-Lube Linear Way MUL Linear Way U MUL LWU C-Lube Linear Way Linear Way U 1 16 C-Lube Maintenance Free Series C-Lube Linear Way long term maintenance free supported! The aquamarine end plate is the symbol of maintenance free. Identification umber

More information

Linear Way F. Linear Way F series. Linear Way F LWFF LWFH. Interchangeable. Wide structure. Flange type and block type.

Linear Way F. Linear Way F series. Linear Way F LWFF LWFH. Interchangeable. Wide structure. Flange type and block type. ide Rail Type Linear ay Linear ay LHLLS U.S. PATTD Linear ay is a linear motion rolling guide, featuring a wide track rail along which a highly rigid slide unit performs endless linear motion. A large

More information

C-Lube Linear Way MLV MLV

C-Lube Linear Way MLV MLV -Lube Linear Way 9 0 -Lube Maintenance Free Series -Lube Linear Way Long term maintenance free compliant! The aquamarine end plate is the symbol of maintenance free. Identification Number and Specification

More information

C-Lube Linear Way MUL Linear Way U

C-Lube Linear Way MUL Linear Way U C-Lube Linear Way Linear Way U 133 134 Aquamarine endplate for identification of C-Lube Linear Way Identifi cation number and specifi cation The specification of C-Lube Linear Way is indicated by the identification

More information

Crossed Roller Ways. Description of each series and Table of dimensions. Anti-Creep Cage Crossed Roller Way

Crossed Roller Ways. Description of each series and Table of dimensions. Anti-Creep Cage Crossed Roller Way Crossed Roller Ways Description of each series and Table of dimensions Crossed Roller Way Page - to -7 Anti-Creep Cage Crossed Roller Way Page - to - Crossed Roller Way Unit Page - to - In the table of

More information

C-Lube Linear Way ML Linear Way L

C-Lube Linear Way ML Linear Way L -Lube Linear ay Linear ay L 3 Aquamarine endplate for identification of -Lube Linear ay Identifi cation number and specifi cation The specifications of series and LLseries are indicated by the identification

More information

C-Lube Linear Way MH Linear Way H MH LWH

C-Lube Linear Way MH Linear Way H MH LWH -Lube Linear ay M Linear ay ML -Lube Maintenance ree Series -Lube Linear ay M M long term maintenance free supported! Te aquamarine end plate is te symbol of maintenance free. Identification umber and

More information

NSR-TBC. LM Guide Self-aligning Type Model NSR-TBC. Point of Selection. Point of Design. Options. Model No. Precautions on Use

NSR-TBC. LM Guide Self-aligning Type Model NSR-TBC. Point of Selection. Point of Design. Options. Model No. Precautions on Use LM Guide Self-aligning Type Model LM casing Spline nut End seal LM rail Grease nipple Side plate Clearance adjustment bolt 90 Side seal (Optional) Ball Retainer Cross section 30 Point of Selection A Point

More information

SRG. Caged Roller LM Guide Ultra-high Rigidity Type Model SRG. Point of Selection. Point of Design. Options. Model No. Precautions on Use

SRG. Caged Roller LM Guide Ultra-high Rigidity Type Model SRG. Point of Selection. Point of Design. Options. Model No. Precautions on Use Caged Roller LM Guide Ultra-high Rigidity Type Model LM block LM rail End seal Endplate 45 45 Caged roller Roller 45 Cross section 45 * or the caged roller, see. Point of Selection A Point of Design Options

More information

SHS. Caged Ball LM Guide Global Standard Size Model SHS. Point of Selection. Point of Design. Options. Model No. Precautions on Use

SHS. Caged Ball LM Guide Global Standard Size Model SHS. Point of Selection. Point of Design. Options. Model No. Precautions on Use Caged Ball LM Guide Global Standard Size Model LM block LM rail Endplate End seal 45 Ball Ball cage Cross section 45 * For the Ball Cage, see. Point of Selection Point of Design Options Model No. Precautions

More information

511E. LM Guide General Catalog

511E. LM Guide General Catalog General Catalog A Classification Table of the s Ball Guide Caged Ball Type Full-ball Type Standard Type Standard Type Model SHS Global Standard Size Model SSR Radial Model HSR 4-way Equal Load Model SR

More information

HSR. LM Guide Global Standard Size Model HSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use

HSR. LM Guide Global Standard Size Model HSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use LM Guide Global Standard Size Model Retainer plate Endplate End seal Grease nipple Ball Retainer plate Inner seal (Optional) Side seal LM rail Cross section 45 45 Point of Selection A Point of Design Options

More information

SSR. Caged Ball LM Guide Radial Type Model SSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use

SSR. Caged Ball LM Guide Radial Type Model SSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use Caged Ball LM Guide Radial Type Model Endplate LM block End seal LM 90 30 Ball Ball cage Cross section * For the Ball Cage, see A. Point of Selection A Point of Design Options Precautions on Use Accessories

More information

SVR/SVS. Caged Ball LM Guide Ultra-heavy Load Type for Machine Tools Model SVR/SVS. Point of Selection. Point of Design. Options. Model No.

SVR/SVS. Caged Ball LM Guide Ultra-heavy Load Type for Machine Tools Model SVR/SVS. Point of Selection. Point of Design. Options. Model No. Caged Ball Guide Ultra-heavy Load Type for Machine Tools Model Protector 90 rail Ball cage Radial type model SVR Cross section 40 50 Ball * For the Ball Cage, see A. 4-Way Type Model SVS Cross section

More information

Linear Guideways HG Series

Linear Guideways HG Series 18 G99TE1-67 Linear Guideways 2-1 - Heavy Load Ball Type Linear Guideway HG series linear guideways are designed with load capacity and rigidity higher than other similar products with circular-arc groove

More information

Caged Roller LM Guide

Caged Roller LM Guide Caged Roller LM Guide SRG/SRN Ultra-high Rigidity Long-term Maintenance-free Operation Smooth Motion Wide Array of Options For details, visit THK at www.thk.com Product information is updated regularly

More information

Linear Bushing General Catalog

Linear Bushing General Catalog General Catalog A Technical Descriptions of the Products B Product Specifications (Separate) Features and Types... Features of the... Structure and features... Dedicated Shafts for Model LM... Standard

More information

The Block Structure. Linear block SBG, SBS, SPG and SPS types are available. All blocks are dimensionally interchangeable.

The Block Structure. Linear block SBG, SBS, SPG and SPS types are available. All blocks are dimensionally interchangeable. Circular arc groove Two pint contact structure of circular arc groove. It keeps the function of self-aligning and smooth rolling performance. 45 angle of contact Four rows of circular arc groove contact

More information

LM Guide Radial Type Model SR

LM Guide Radial Type Model SR LM Guide Radial Type Model Endplate LM block Grease nipple End seal LM rail 90 Ball Retainer plate Side seal (Optional) Cross section 30 Point of Selection A Point of Design Options Model No. Precautions

More information

NSK Linear Guides. Roller Guide RA Series. Extended series

NSK Linear Guides. Roller Guide RA Series. Extended series NSK Linear Guides A roller guide series employing advanced analysis technology offers super-high load capacity and rigidity. The RA series includes a complete lineup to handle a wide range of applications.

More information

2-9 RG Series High Rigidity Roller Type Linear Guideway

2-9 RG Series High Rigidity Roller Type Linear Guideway G99TE17-136 2-9 High Rigidity Roller Type Linear Guideway 2-9-1 Advantages and features The new RG series from Hiwin features a roller as the rolling element instead of steel balls. The roller series offers

More information

G10TE HG Linear Guideway

G10TE HG Linear Guideway G10TE01-0310 I HG Linear Guideway Preface... 1 1... 1 1-1... 1 1-2... 2 1-3... 3 1-3-1 1-3-2 1-4... 4 1-4-1 1-4-2 1-4-3 1-4-4 1-4-5 1-5... 6 1-5-1 1-5-2 1-5-3 1-5-4 1-6... 9 1-7... 9 1-7-1 1-7-2 1-8...

More information

2-1 HG Series - Heavy Load Ball Type Linear Guideway

2-1 HG Series - Heavy Load Ball Type Linear Guideway 2 G99TE15-114 Linear Guideways 2-1 - Heavy Load Ball Type Linear Guideway HG series linear guideways are designed with load capacity and rigidity higher than other similar products with circular-arc groove

More information

C-Lube Linear Roller Way Super MX Linear Roller Way Super X

C-Lube Linear Roller Way Super MX Linear Roller Way Super X -ube inear Roller ay uper inear Roller ay uper X 14 Aquamarine endplate for identification of -ube inear ay Identifi cation number and specifi cation Te specification of -ube inear Roller ay uper is identified

More information

2. HG Series Linear Guideway Four-row Super Heavy Load

2. HG Series Linear Guideway Four-row Super Heavy Load 16 2. HG Series Linear Guideway Four-row Super Heavy Load 2-1 Features of the HG Series Linear Guideway 2-2 Construction of HG Series Block Cap End cap End seal (Double seals and scraper) Rail Grease nipple

More information

Linear Bushing. General Catalog A-523

Linear Bushing. General Catalog A-523 Linear Bushing General Catalog A Technical Descriptions of the Products B Product Specifications (Separate) Features and Types... Features of the Linear Bushing... Structure and features... Dedicated Shafts

More information

Ball Rail Systems RE / The Drive & Control Company

Ball Rail Systems RE / The Drive & Control Company Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems

More information

C-Lube Linear Roller Way Super MX Linear Roller Way Super X

C-Lube Linear Roller Way Super MX Linear Roller Way Super X -Lube Linear Roller ay uper Linear Roller ay uper X 14 148 Aquamarine endplate for identification of -Lube Linear ay Identifi cation number and specifi cation Te specification of and series are identified

More information

HSR-M1. LM Guide High Temperature Type Model HSR-M1. Point of Selection. Point of Design. Options. Model No. Precautions on Use

HSR-M1. LM Guide High Temperature Type Model HSR-M1. Point of Selection. Point of Design. Options. Model No. Precautions on Use LM Guide High Temperature Type Model Endplate SUS304 End seal (High temperature rubber material) LM THK-EX50 Ball SUS440C Side seal (High temperature rubber material) LM rail THK-EX50 Cross section 45

More information

RSR. LM Guide Miniature Types Model RSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use

RSR. LM Guide Miniature Types Model RSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use LM Guide Miniature Types Model Endplate LM block End seal LM rail Ball Grease nipple Cross section Point of Selection A Point of Design Options Model No. Precautions on Use Accessories for Lubrication

More information

Linear Guideways QH Series

Linear Guideways QH Series G99TE17-136 2-6 Quiet Linear Guideway, with SynchMotion TM Technology The development of HIWIN-QH linear guideway is based on a four-row circular-arc contact. The HIWIN-QH series linear guideway with SynchMotion

More information

Cross Roller Guide/Ball Guide General Catalog

Cross Roller Guide/Ball Guide General Catalog General Catalog A Product Descriptions Features and Types... A7-2 Features of the.. A7-2 Structure and Features... A7-2 Types of the.. A7-3 Types and Features... A7-3 Point of Selection... A7-4 Rated Load

More information

Miniature Ball Rail Systems

Miniature Ball Rail Systems R310EN 2210 (2004.06) The Drive & Control Company 2 Bosch Rexroth AG Linear Motion and Assembly Technologies Miniature-BRS R310EN 2210 (2004.06) Linear Motion Systems Ball Rail System Standard Ball Rail

More information

114 NOSE SEIKO CO.,LTD NOSE SEIKO CO.,LTD

114 NOSE SEIKO CO.,LTD NOSE SEIKO CO.,LTD 114 NOSE SEIKO CO.,LTD NOSE SEIKO CO.,LTD 115 and Part Code Applicable axis diameter Feature Part Code 5 ~ 3 General purpose cam follower with screwdriver groove on the stud head. Available with stainless

More information

Profi le rail guides LLR

Profi le rail guides LLR Profi le rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout

More information

2-3 Miniature MGN/MGW Series Features of MGN Series

2-3 Miniature MGN/MGW Series Features of MGN Series 54 G99TE08-0405 2-3 Miniature MGN/MGW Series 2-3-1 Features of MGN Series 2-3-2 Construction of MGN Series Cap Block End cap End seal Grease nipple Ball Bottom seal Retainer Rolling Circulation System:

More information

LM Guide HCR/HMG. R Guide / Straight-Curved Guide Achieving a Simplified Mechanism. For details, visit THK at CATALOG No.

LM Guide HCR/HMG. R Guide / Straight-Curved Guide Achieving a Simplified Mechanism. For details, visit THK at  CATALOG No. LM Guide HCR/HMG R Guide / Straight-Curved Guide Achieving a Simplified Mechanism For details, visit THK at www.thk.com Product information is updated regularly on the THK website., CATALOG No.306-8E HCR

More information

Linear Guideways MG Series

Linear Guideways MG Series 52 2-3 - Miniature Linear Guideway 2-3-1 Features of MGN Series 1. Tiny and light weight, suitable for miniature equipment. 2. All materials in special grade of stainless steel for anti-corrosion size

More information

Roller Follower General Catalog

Roller Follower General Catalog General Catalog A Product Descriptions Features and Types... A20-2 Features of the... A20-2 Structure and Features... A20-2 Types of the... A20-3 Types and Features... A20-4 Point of Selection... A20-6

More information

12.3 Full Roller Type, MSR Series

12.3 Full Roller Type, MSR Series 12.3 Full Roller Type, MSR Series A. Construction Carriage End Seal Grease Nipple End Cap Inner Seal Roller Bottom Seal 45 Rail 45 B. Characteristics The full roller type linear guideway, MSR series, equip

More information

...components in motion. Miniature Linear Guideways

...components in motion. Miniature Linear Guideways ...components in motion Miniature Linear Introduction Miniature linear guideway systems are widely used throughout industry for precise, compact applications. Precise and Stainless The gothic arch shape

More information

Precision Linear Pack

Precision Linear Pack Precision Linear Pack General Catalog A Technical Descriptions of the Products B Product Specifications (Separate) Features... Features of the Precision Linear Pack... Structure and features... Rated Load

More information

12.5 Ball Chain Type, SME Series

12.5 Ball Chain Type, SME Series 12.5 Ball Chain Type, SME Series A. Construction Carriage End Cap End Seal Grease Nipple Inner Seal Ball Bottom Seal Ball Chain 45 Rail 45 B. Characteristics The ball chain type linear guideway, SME series,

More information

Ballscrews / Linear Guideway General Catalog

Ballscrews / Linear Guideway General Catalog Ballscrews / inear Guideway General Catalog inear Guideway 2 Introduction of ach Series 2. eavy oad Type, MSA Series A. Construction Upper Retainer Carriage nd Seal nd Cap Rail Grease Nipple Ball 45 ower

More information

Wide Caged-roller LM Guide

Wide Caged-roller LM Guide NEW Wide Caged-roller LM Guide Optimal for large machines that require high rigidity and mounting accuracy Ultra-high rigidity, heavy load A wide, large roller guide model is added to the lineup CATALOG

More information

Inner block. Grease nipple. Fig.1 Structure of LM Guide Actuator Model KR

Inner block. Grease nipple. Fig.1 Structure of LM Guide Actuator Model KR LM Guide ctuator Model LM Guide + all Screw = Integral-structure ctuator Stopper Housing all screw Inner block Grease nipple Outer rail earing (supported side) Housing Stopper Double-row ball circuit earing

More information

LM Roller General Catalog

LM Roller General Catalog General Catalog A Product Descriptions Features and Types... A10-2 Features of the... A10-2 Structure and Features... A10-2 Types of the... A10-4 Types and Features... A10-4 Point of Selection... A10-6

More information

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 01_1 Miniature st Headline_36 Ball Rail pt/14.4 Systems mm second line 2 Linear Motion and Assembly Technologies Miniature Ball Rail Systems Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts

More information

Runner block FNS R Flanged, normal, standard height

Runner block FNS R Flanged, normal, standard height 38 Bosch Rexroth Corporation Roller Rail Systems R310A 30 (007.06) Standard Runner Blocks, Steel version Runner block FS R1851... 10 Flanged, normal, standard height Further runner block versions with

More information

506E. LM Guide Actuator General Catalog

506E. LM Guide Actuator General Catalog LM Guide Actuator General Catalog A LM Guide Actuator General Catalog A Product Descriptions 506E Caged Ball LM Guide Actuator Model SKR.. A2-4 Structure and Features... A2-4 Caged Ball Technology... A2-6

More information

SRW NEW. Wide Type Roller Guide with Caged Technology

SRW NEW. Wide Type Roller Guide with Caged Technology NEW Roller Wide Type Roller Guide with Caged Technology Ultra-High Rigidity, Heavy Load Low Friction Long Service Life, Long-Term Maintenance-Free Operation SRW This catalog uses recycled paper. CATALOG

More information

Introduction of Each Series

Introduction of Each Series 12 Introduction of Each Series 12.1 eavy Load Type, MSA Series A. Construction LINEAR GUIDEWAY Upper Retainer Carriage End Cap End Seal Grease Nipple Ball Lower Retainer Rail 45 eavy Load Type, MSA Series

More information

R310EN 2302 ( ) The Drive & Control Company

R310EN 2302 ( ) The Drive & Control Company R31EN 232 (26.4) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion Systems Basic Mechanical

More information

SRS. Caged Ball LM Guide Miniature Type Model SRS. Point of Selection. Point of Design. Options. Model No. Precautions on Use

SRS. Caged Ball LM Guide Miniature Type Model SRS. Point of Selection. Point of Design. Options. Model No. Precautions on Use Caged Ball M Guide Miniature Type Model M rail Endplate End seal M block Compact type Model -M Ball Side seal Ball cage Wide type Model -WM * or the ball cage, see A. Point of Selection A Point of Design

More information

HSR(Ct Grade) Cost effective Type (Ct Grade) of LM Guide Debuts STOCK DISPONIBLE ENTREGA INMEDIATA

HSR(Ct Grade) Cost effective Type (Ct Grade) of LM Guide Debuts STOCK DISPONIBLE ENTREGA INMEDIATA Cost effective Type (Ct Grade) of L Guide Debuts A cost effective series of the well-established model HSR has been newly added. Optimal for the general linear guide market such as for conveyance systems!

More information

Instruction Manual for the LM Guide

Instruction Manual for the LM Guide Instruction Manual for the LM Guide 1 Table of Contents 1.Introduction 1 2.Precautions on Using the LM Guide 2 1.Introduction Thank you for purchasing the THK products. This document will explain any precautions

More information

12.4 Miniature Type, MSC MSD Stainless Steel Series

12.4 Miniature Type, MSC MSD Stainless Steel Series 12.4 Miniature Type, MSC MSD Stainless Steel Series A. Construction Carriage End Cap MSC Standard Type End Seal Rail MSD Wide Type Ball Retainer Bottom Seal 45 45 B. Characteristics MSC st ows with Gothic-arch

More information

LINEAR RAIL BALL CHAIN TYPE

LINEAR RAIL BALL CHAIN TYPE LINEAR RAIL BALL CAIN TYPE Svanemærket tryksag 54-73 INDEX Index Product overview... 4-5 Dimension table RC/ERC... 6-7 Dimension table RC... 8-9 Dimension table ARC... 0-3 Dimension table & Grease... 4

More information

SRG. CATALOG No.270-4E

SRG. CATALOG No.270-4E Roller SRG CATALOG No.27-4E LM Guide with Caged Roller TechnologySRG LM rail LM block End seal End plate Pipe Retaining plate Caged Roller Roller cage Roller Caged roller retaining plates 45 45 Enlarged

More information

Features of the Slide Pack

Features of the Slide Pack BER AB тел. (495) 727-22-72 thk-mail@ya.ru Features and Types Features of the Mounting plate Ball Ball case Slide rail Seal uide plate Stopper Slider Structure and Features Fig.1 Structure of Model FBW-RUU

More information

Ball. Ball cage. Fig.1 Structure of Caged Ball LM Guide Actuator Model SKR

Ball. Ball cage. Fig.1 Structure of Caged Ball LM Guide Actuator Model SKR Caged all LM Guide Actuator Model Inner block all screw shaft Grease nipple Outer rail all cage all Structure and Features Fig.1 Structure of Caged all LM Guide Actuator Model Caged all LM Guide Actuator

More information

LINEAR GUIDES with Ball Retainer

LINEAR GUIDES with Ball Retainer LINEAR GUIDES with Ball Retainer LGSR, LGSR-S Series LGHR, LGHR-F Series Low noise operation without collision of balls Suitable for high precision since vibration is canceled Linear Guide

More information

SNR/SNS. Advantages of Caged Ball Technology. Revised basic dynamic load ratings

SNR/SNS. Advantages of Caged Ball Technology. Revised basic dynamic load ratings Advantages of aged Ball Technology High speed performance Low noise design, Long service life Long-term maintenance-free operation Reduction in rolling resistance variation SNR/SNS Revised basic dynamic

More information

...components in motion. Easy Rail

...components in motion. Easy Rail ...components in motion Easy Rail Easy Rail Introduction The Easy Rail family have a compact cross-section and low-friction movement. Robust and Long Service Life Easy Rail s range of cross-sectional rail

More information

The Characteristics of PMI Linear Guideways

The Characteristics of PMI Linear Guideways Linear Guideway 1 The Characteristics of PMI Linear Guideways (1) High positioning accuracy, high repeatability The PMI linear guideway is a design of rolling motion with a low friction coeffcient, and

More information

F-1 SLIDE GUIDE STROKE BALL SPLINE ROTARY BALL SPLINE BALL SPLINE TOPBALL PRODUCTS SLIDE BUSH SLIDE UNIT SLIDE ROTARY BUSH STROKE BUSH SLIDE SHAFT

F-1 SLIDE GUIDE STROKE BALL SPLINE ROTARY BALL SPLINE BALL SPLINE TOPBALL PRODUCTS SLIDE BUSH SLIDE UNIT SLIDE ROTARY BUSH STROKE BUSH SLIDE SHAFT SLIDE GUIDE BALL SPLIE ROTARY BALL SPLIE STROKE BALL SPLIE TOPBALL PRODUTS SLIDE BUSH SLIDE UIT SLIDE WAY/GOIO WAY MIIATURE SLIDE F- ATUATOR SLIDE SREW The B stroke bush is a linear and rotational motion

More information

Linear Guideway. Technical Information.

Linear Guideway. Technical Information. Linear Guideway Technical Information www.hiwin.com.tw Linear Guideways Technical Information Index Preface...1 1. General Information...1 1-1 Advantages and features of Linear Guideway...1 1-2 The principles

More information

HSR-M1VV. LM Guide Medium-to-low Vacuum Type Model HSR-M1VV. Point of Selection. Point of Design. Options. Model No. Precautions on Use

HSR-M1VV. LM Guide Medium-to-low Vacuum Type Model HSR-M1VV. Point of Selection. Point of Design. Options. Model No. Precautions on Use LM Guide Medium-to-low Vacuum Type Model LM block: THK-EX50 (martensitic stainless steel) End plate: SUS304 Labyrinth end seal dedicated for Medium-to-Low Vacuum: SUS304 Upper plate: SUS316L LM rail: THK-EX50

More information

Precise Stable Durability High Rigidity. Meet the Multi-Demand of Accuracy and Efficiency

Precise Stable Durability High Rigidity. Meet the Multi-Demand of Accuracy and Efficiency Precise Stable Durability High Rigidity Meet the Multi-Demand of Accuracy and Efficiency Linear Guideway B1-1 The Characteristics of PMI Linear Guideways High positioning accuracy, high repeatability

More information

RSR-M1. LM Guide High Temperature Type Model RSR-M1. Point of Selection. Point of Design. Options. Model No. Precautions on Use

RSR-M1. LM Guide High Temperature Type Model RSR-M1. Point of Selection. Point of Design. Options. Model No. Precautions on Use LM Guide High Temperature Type Model Endplate SUS34 LM block THK EX5 End seal (High temperature rubber) LM rail THK EX5 Ball SUS44C Grease nipple SUS34 Point of Selection A Point of Design Options Model

More information

A LH Series. LH Series A162. (2) Ball slide shape

A LH Series. LH Series A162. (2) Ball slide shape Series -5-1.3 Series (2) all slide sape all slide Model Sape/installation metod ig-load type ype Super-ig-load type 1 1 (1) eatures 1. ig self-aligning capability (rolling direction) Same as te D combination

More information

(1) High positioning accuracy, high repeatability. (2) Low frictional resistance, high precision maintained for long period

(1) High positioning accuracy, high repeatability. (2) Low frictional resistance, high precision maintained for long period Linear Guideway 1 The Characteristics of PMI Linear Guideways (1) igh positioning accuracy, high repeatability The PMI linear guideway is a design of rolling motion with a low friction coeffcient, and

More information

series Linear guideways CG-serie 3.3 CG series

series Linear guideways CG-serie 3.3 CG series series CG-serie 3.3 CG series 3.3.1 Properties of the linear guideways, series CG The HIWIN linear guideways of the CG series with O-arrangement of the ball tracks guarantee high torque loading capacity,

More information

Precision Miniature Ball Screw

Precision Miniature Ball Screw Brief introduction of Precision Miniature Ball Screw Precision Miniature ball screw assemblies are conventionally understood to be systems with a nominal diameter of 16mm or less. Their miniaturized nut

More information

Guide plate. Fig. 1 Construction of Slide Pack Type FBW-RUU

Guide plate. Fig. 1 Construction of Slide Pack Type FBW-RUU A Slide Pack Slide Pack Type FBW Japanese patent No. 1696446 Overseas patent resistered in the U.S. Mounting plate Ball Slide rail Seal Guide plate Stopper Fig. 1 Construction of Slide Pack Type FBW-RUU

More information

Easy Slide Rails ov -easy_slide_divider - U pdated

Easy Slide Rails ov -easy_slide_divider - U pdated Easy Slide Rails ov-easy_slide_divider - Updated - 18-09-2017 163 Easy Slide Rails Easy Slide Rails Introduction The Easy Slide family of linear rails have a compact cross-section and low-friction movement.

More information

Miniature Linear Guideway MSC Stainless Steel Series

Miniature Linear Guideway MSC Stainless Steel Series Supreme Performance of High Precision 1 Construction Carriage End Cap End Seal Rail Ball Retainer Bottom Seal 4 4 2 Characteristics MSC stainless steel series are applied two rows with Gothicarch groove

More information

LM Guide Actuator KR. For details, visit THK at CATALOG No E. Product information is updated regularly on the THK website.

LM Guide Actuator KR. For details, visit THK at  CATALOG No E. Product information is updated regularly on the THK website. LM Guide Actuator KR For details, visit THK at www.thk.com Product information is updated regularly on the THK website. CATALOG No.209-10E Integrated LM Guide and all Screw High-rigidity / High-precision

More information

MULTI SLIDERS CONTENTS

MULTI SLIDERS CONTENTS CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG CONTENTS Features 923 Handling Instructions and Precautions 925 Specifications 929 Order Codes 930 Inner Construction 931 Dimensions 932

More information

Guide units. For toolmaking, fixture manufacturing and machine engineering

Guide units. For toolmaking, fixture manufacturing and machine engineering Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar

More information

Linear Guideway General Catalog

Linear Guideway General Catalog General Catalog General Catalog Index TY AG Contents Technical roducts TY AG 1 2 3 4 5 6 7 8 6 7 1 11 11 11 12 12 13 14 15 18 19 1. The Characteristics of MI s 2. The Classifi cation Chart of MI s 3. The

More information

Caged Ball LM Guide SPR / SPS

Caged Ball LM Guide SPR / SPS Caged Ball LM Guide SPR / SPS Adopts 8 Rows of Raceways Achieves Super-Low Waving and Ultra-High Rigidity For details, visit THK at www.thk.com Product information is updated regularly on the THK website.

More information

JPF, BTK-V, MTF, WHF, BLK/WTF, CNF

JPF, BTK-V, MTF, WHF, BLK/WTF, CNF Rolled Models JPF, BTK-V, MTF, WF, BLK/WTF, CNF and BNT Point of Selection Options Model No. Precautions on Use Accessories for Lubrication Mounting Procedure and Maintenance A A B Lead Angle Accuracy

More information

Linear Guideway. Forniture per l Industria Gelmini S.r.l.

Linear Guideway. Forniture per l Industria Gelmini S.r.l. Linear Guideway Forniture per l Industria Gelmini S.r.l. Sede Via Cerati, 3/A 43126 Parma Tel. 0521.993844 Fax 0521.291688 Filiale Via Tiziano, 11 46040 Z.I. Guidizzolo (MN) Tel. 0376.847123 Fax 0376.840319

More information

Profile rail guides LLT

Profile rail guides LLT Profile rail guides LLT Contents The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout

More information

ACTUATORS GENERAL CATALOG

ACTUATORS GENERAL CATALOG CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG ROTARY ACTUATORS VANE TYPE SERIES CONTENTS RAN (Standard Type) Basic Model and Configuration 259 Specifications 26 Order Codes 264 Dimensions

More information

LINEAR MOTION SYSTEM COMPONENTS

LINEAR MOTION SYSTEM COMPONENTS R RECISION NDUSTRIAL OMPONENTS R LINEAR MOTION SYSTEM COMPONENTS LINEAR MOTION SYSTEM COMPONENTS PIC Design has added a most comprehensive selection of precision components for linear motion applications.

More information

Track Rollers/ Cam Followers

Track Rollers/ Cam Followers Track Rollers/ Cam Followers Page Nomenclature...................................... 460 Introduction....................................... 462 Identification....................................... 462

More information

Precision Modules PSK

Precision Modules PSK Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum

More information

FUNCTION OF A BEARING

FUNCTION OF A BEARING Bearing FUNCTION OF A BEARING The main function of a rotating shaft is to transmit power from one end of the line to the other. It needs a good support to ensure stability and frictionless rotation. The

More information

Ball Screw Support Bearings

Ball Screw Support Bearings Ball Screw Support Bearings. Ball Screw Support Bearings CONTENTS. Ball Screw Support Bearings q Angular contact thrust ball bearings A-BST series w Duplex angular contact ball bearings HT series e Needle

More information

TS / CT TS / CT Ⅱ 195 Ⅱ 196

TS / CT TS / CT Ⅱ 195 Ⅱ 196 19 196 Precision Positioning Table Ball screw TS Slide table Ball screw Linear Points Crossed Roller Way 1 High precision and compact positioning table slide tables and beds. High precision and compact

More information

Any reproduction, even partial, is allowed only by written permission by Rollco.

Any reproduction, even partial, is allowed only by written permission by Rollco. LINEAR UNIT E-SMART Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to

More information

SHS. Caged Ball LM Guide. Ball Cage Effect Global Standard Size. BERG AB Тел. (495) , ф.

SHS. Caged Ball LM Guide. Ball Cage Effect Global Standard Size.   BERG AB Тел. (495) , ф. www.thk.ru BERG AB thk@thk.ru Тел. (49)-727-22-72, ф. (49)-22-71 Caged Ball LM Guide Ball Cage Effect Global Standard Size SHS CATALOG No.2-1E www.thk.ru BERG AB thk@thk.ru Тел. (49)-727-22-72, ф. (49)-22-71

More information

Features of the LM Guide

Features of the LM Guide Features of the Functions Required for Linear Guide Surface Large permissible load Highly rigid in all directions High positioning repeatability Running accuracy can be obtained easily High accuracy can

More information

Caged Ball LM Guide. Ball Cage Effect Wide, Low Center of Gravity Type SHW. CATALOG No.248-5E

Caged Ball LM Guide. Ball Cage Effect Wide, Low Center of Gravity Type SHW. CATALOG No.248-5E Caged Ball LM Guide Ball Cage Effect Wide, Low Center of Gravity Type SHW CATALOG No.248-E Ball Cage Effect The early forms of ball bearings were full-ball types without ball cages. Friction between balls

More information

Unfinished Shaft Ends Precision Ball Screw

Unfinished Shaft Ends Precision Ball Screw Standard Stock Models BIF, MDK, MBF and BNF Point of Selection Options Model No. Precautions on Use ccessories for ubrication Mounting Procedure and Maintenance B ead ngle ccuracy ccuracy of the Mounting

More information