All directions given in this book are as seen from the operator s position at the rear of the machine.

Size: px

Start display at page:

Download "All directions given in this book are as seen from the operator s position at the rear of the machine."

Aron Snow
6 years ago
Views:

1 Service Manual S12, S16 S12cc Upright Vacuum READ THIS BOOK This book has important information for the use and safe operation of this machine. Failure to read this book prior to operating or attempting any service or maintenance procedure to your ALTO machine could result in injury to you or to other personnel; damage to the machine or to other property could occur as well. You must have training in the operation of this machine before using it. If your operator(s) cannot read this manual, have it explained fully before attempting to operate this machine. All directions given in this book are as seen from the operator s position at the rear of the machine. For new books write to: ALTO U.S. Inc., 2100 Highway 265, Springdale, Arkansas Form No A 7/01 Clarke Technology Printed in the U.S.A.

2 Collector Cup Assembly Drawing 7/ Page -14-

3 Collector Cup Assembly Parts List 7/01 Ref. Part No. Description Qty A Screw (M4 *10) A Screw (M4 *15) E-clip (E6) A Screw (M4 * 8) A Handle Grip A Handle Assembly, Upper A Bag Hook A Bag Retainer A Cord Retainer, Upper 1 75 Screw (M4 *25) A Washer, Upper Cord Retainer A Spring, Upper Cord Retainer A Nut, Handle A Screw, Handle A Handle Assembly, Lower A Cord Retainer, Lower 1 82 Screw (M4 * 45) A Handle Socket Seat Axle A Handle Socket Tube A Handle Socket Cam A Power Cord A Bushing, Handle Socket A Seat, Handle Socket A Nut, Handle Tube A Clamp, Handle Socket Cam A Spring, Bag A Clip, Bag (Chrome) A Bag Coupling A Bag Coupling Gasket A Dust Bag A Bag Frame (incl. w/bag asm.) A Bag Clamp Plate (incl. w/bag asm.) lower A Bag Clamp Plate (incl. w/bag asm.) upper A Seal, Upper Hose A Cup Frame A Gasket, Cup Frame A Dust Cup A Side Clip, Cup Screw (M4 *9) A Exhaust Hose A Clamp Cable Tie A Hose, Inlet Curved A Collector Cup Assembly 1 NOTE: indicates a change has been made since the last publication of this manual. Page -15-

4 Base Assembly Drawing 1/01 Page -16-

5 Base Assembly Parts List 1/01 Ref. Part No. Description Qty A Hood and Graphics A Screw (M4 *10) A Cable Clip A Screw (M4* 18.5) 6 5 Washer (4.2 *12*1) A Motor Assembly A Motor Exhaust (LH) A Exhaust Foam A Power Switch A Switch Clip 1 11 Screw (M3 *12) A Strain Relief Bushing A Bushing Bracket A Foot Pedal A Spring, Pedal Return A Knob, Bag A Screw (M4 *20) A Bag Support A 12" Base Assembly A 16" Base Assembly 1 20 Nut (M4) A Rear Axle 1 22 Washer (8.5*16*1) 3 23 Nut, Cap (F-Type) A Rear Wheel A Clamp, Wheel Axle A Screw (M4 *15) A Cam (RH) A Cam (LH) 1 29 Washer (4.1*8*1) A Spring, Front Axle 1 31 E-Clip (E6) 5 32 Rod, Front Axle Support A Front Axle A Front Axle Seat A Screw (M4*8) A Front Wheel A Plate, Front Axle Support 1 Ref. Part No. Description Qty A Clamp, Front Axle 1 39 Screw (M3*10) Drive Belt A 12" Bristle Strip Set (4 strips) A 16" Bristle Strip Set (4 strips) " Brush Roll 1 16" Brush Roll A Shaft - 12" A Shaft - 16" A Bearing Support A Cover, Cap A End Cap A Washer, Felt A Bearing A 12" Bottom Plate Assembly A 16" Bottom Plate Assembly A 12" Furniture Guard A 16" Furniture Guard A Height Adjustment Cam A Screw (M3*6) A Clip, Height Adjustment Cam A Seat, Height Adjustment Cam A Gear, Height Adjustment A Spring, Height Adjustment A Axle, Height Adjustment A Crank Gear, Height Adjustment A Crank Axle, Height Adjustment A Spring, Pedal Support A Crank, Height Adjustment A Motor Exhaust (RH) A Height Indicator Switch Wire -16# Switch Wire -18# Washer (4.2*14*1) Nut, Cap (M4) 3 NI* 51365A Carbon Brush 2 NI * 51366A Impeller 1 NI * 51367A Motor Pulley 1 *NI = Not illustrated Page -17-

6 \ Handle and Filter Bag Assembly Drawing 7/01 Page -18-

7 Handle and Filter Bag Assembly Parts List 7/01 Ref. Part No. Description Qty A Screw (M4*15) E-Clip (E6) A Screw (M4*8) A Handle Grip A Handle Assembly - Upper Chrome A Bag Hook A Bag Retainer A Cord Retainer- Upper 1 75 Screw (M4*25) A Washer, Upper Cord Retainer A Spring, Upper Cord Retainer A Nut, Handle A Screw, Handle A Handle Assembly - Lower Chrome A Cord Retainer - Lower 1 82 Screw (M4*45) A Axle, Handle Socket Seat - Plated A Tube, Handle Socket - Plated A Cam, Handle Socket A Power Cord, Symphony A Bushing, Handle Socket A Seat, Handle Socket A Nut, Handle Tube (M4) A Clamp, Handle Socket Cam A Cloth Filter Bag Assembly A Spring, Bag A Clip, Bag (Chrome) A Dust Bag (long) A Bag Coupling A Gasket, Bag Coupling A Bag, Paper Filter Assembly Bag, Paper Filter 3 pk A Bag, Cloth, Zipper A Cable, Tie, Reuseable A Exhaust Hose Cable Tie A Hose, Inlet 1 NOTE: indicates a change has been made since the last publication of this manual. Page -19-

Si Ud. o sus operadores no pueden leer el Inglés, se hagan explicar este manual completamente antes de tratar el manejo o servicio de esta máquina.

Si Ud. o sus operadores no pueden leer el Inglés, se hagan explicar este manual completamente antes de tratar el manejo o servicio de esta máquina. Service Manual Model Carpetmaster READ THIS BOOK This book has important information for the use and safe operation of this machine. Failure to read this book prior to operating or attempting any service