ENGINEERING INSTRUCTIONS
|
|
|
- Noah Melvyn Spencer
- 5 years ago
- Views:
Transcription
1 TITLE: SELECTION CHART FOR 3900 & 4900 PILOTS DATE: 12/14/00 PAGE 1 OF SCOPE: 1.1 THIS DOCUMENT CONTAINS SELECTION INFORMATION FOR 3900 PILOTS (VPN 1, 2, 3, 4, AND 5; VMF 1 AND 2 NON-LIQUID SERVICE; VMF2 LIQUID SERVICE; VMF 3, 4, 5 GAS & LIQUID; VMN 1 AND 2; HMN 1, 2, AND 3; 39MV07/37-2 & 39PV07/37-2 & 4900 PILOTS 49MV07/37-1 & 49PV07/ DOCUMENT CONTROL: 2.1 REVISION OF THIS DOCUMENT SHALL BE CONTROLLED PER EG303 AND DRESSER QAOP REFERENCES: 3.1 DRESSER MA DRESSER QTI DRESSER EG DRESSER EG ASME SECTION I 3.6 ASME SECTION III 3.7 ASME SECTION IV 3.8 ASME SECTION VIII
2 TITLE: SELECTION CHART FOR 3900 & 4900 PILOTS DATE: 12/14/00 PAGE 2 OF 10 VPN PS15340SY PS15351SY PS15352SY PS15342SY PS15341SY PS15349SY PS15343SY VMF3 (GAS & LIQUID) PS21171CR PS21172CR PS21174CR VPN PS15344SY PS15345SY PS15346SY PS15347SY PS15348SY VMF3S (STEAM PILOT VALVES) PS21171CR PS21172CR PS21174CR PS21174CR & PS21175CR VPN PS15352IX PS15341IX PS15343IX VMF4 (GAS & LIQUID) PS21174CR VPN A130IX A131IX A132IX A133IX A134IX VMF5 (GAS & LIQUID) PS21174CR & PS21175CR VPN IX 0119IX 0122IX VMN PS21176CR PS21171CR VMN PS21172CR PS21174CR *ZINC PLATED DISC ASSEMBLIES WITH STAINLESS STEEL GUIDE.
3 TITLE: SELECTION CHART FOR 3900 & 4900 PILOTS DATE: 12/14/00 PAGE 3 OF 10 VMF1 (NON-LIQUID SERVICE) PS21171CR PS21172CR PS21174CR HMN1 HMN2 HMN A* B* A* VMF2 (NON-LIQUID SERVICE) PS21174CR VMF2 (LIQUID SERVICE) PS21171CR PS21172CR A76CR A77CR A79CR A84CR *ZINC PLATED DISC ASSEMBLIES WITH STAINLESS STEEL GUIDE.
4 TITLE: SELECTION CHART FOR 3900 & 4900 PILOTS DATE: 12/14/00 PAGE 4 OF 10 FOR REFERENCE (SEE (-2) DESIGN FOR ORDERS) 39PV01-LS 39PV01-GS 39MV01-LS 39MV01-GS 15 TO 25 PV10CR 39PV01-LS 39PV01-GS 39MV01-LS 39MV01-GS 26 TO 50 PV20CR 39PV01-LS 39PV01-GS 39MV01-LS 39MV01-GS 51 TO 100 PV30CR 39PV07-1-LS 39PV07-1-GS 39MV07-1-LS 39MV07-1-GS 101 TO 300 PV40CR 39PV07-1-LS 39PV07-1-GS 39MV07-1-LS 39MV07-1-GS 301 TO 750 PV60CR 39PV37-1-LS 39PV37-1-GS 39MV37-1-LS 39MV37-1-GS 751 TO 1250 PV50CR 39PV37-1-LS 39PV37-1-GS 39MV37-1-LS 39MV37-1-GS 1251 TO 2000 PV90CR 39PV37-1-LS 39PV37-1-GS 39MV37-1-LS 39MV37-1-GS 2001 TO 2750 PV80CR 39PV37-1-LS 39PV37-1-GS 39MV37-1-LS 39MV37-1-GS 2751 TO 3750 PV70CR & PV80CR
5 TITLE: SELECTION CHART FOR 3900 & 4900 PILOTS DATE: 12/14/00 PAGE 5 OF TO 25 PV10CR 26 TO 50 PV20CR 51 TO 75 PV30CR 76 TO 125 PV40CR 126 TO 250 PV50CR 251 TO 475 PV90CR 476 TO 750 PV80CR
6 TITLE: SELECTION CHART FOR 3900 & 4900 PILOTS DATE: 12/14/00 PAGE 6 OF 10 39PV37-2-LS 39PV37-2-GS 39MV37-2-LS 39MV37-2-GS 751 TO 1250 PV50CR 39PV37-2-LS 39PV37-2-GS 39MV37-2-LS 39MV37-2-GS 1251 TO 2000 PV90CR 39PV37-2-LS 39PV37-2-GS 39MV37-2-LS 39MV37-2-GS 2001 TO 2750 PV80CR 39PV37-2-LS 39PV37-2-GS 39MV37-2-LS 39MV37-2-GS 2751 TO 3750 PV70CR & PV80CR
7 TITLE: SELECTION CHART FOR 3900 & 4900 PILOTS DATE: 12/14/00 PAGE 7 OF TO 25 PV10CR 26 TO 50 PV20CR 51 TO 75 PV30CR 76 TO 125 PV40CR 126 TO 250 PV50CR 251 TO 475 PV90CR 476 TO 750 PV80CR
8 TITLE: SELECTION CHART FOR 3900 & 4900 PILOTS DATE: 12/14/00 PAGE 8 OF 10 49PV37-1 LS 49PV37-1-GS 49MV37-1-LS 49MV37-1-GS 751 TO 1250 PV50CR 49PV37-1-LS 49PV37-1-GS 49MV37-1-LS 49MV37-1-GS 1251 TO 2000 PV90CR 49PV37-1-LS 49PV37-1-GS 49MV37-1-LS 49MV37-1-GS 2001 TO 2750 PV80CR 49PV37-1-LS 49PV37-1-GS 49MV37-1-LS 49MV37-1-GS 2751 TO 3750 PV70CR & PV80CR 49PV55-1-LS 49PV55-1-GS 49MV55-1-LS 49MV55-1-GS 3750 TO 4500 PV90CR 49PV55-1-LS 49PV55-1-GS 49MV55-1-LS 49MV55-1-GS 4501 TO 5500 PV80CR
9 TITLE: SELECTION CHART FOR 3900 & 4900 PILOTS DATE: 12/14/00 PAGE 9 OF 10 ORDERING INFORMATION A. SELECTING A : INFORMATION NEEDED SET 3. MATERIAL (SEE NOTE BELOW) B. USING THE CHART 1. GO TO CHART THAT LISTS. 2. FIND THE WHICH FITS YOUR SET POINT. 3. SELECT AND SPECIFY THE REQUIRED IN THE COLUMN. NOTE: THE PILOTS ARE FURNISHED WITH THE FOLLOWING STANDARD MATERIALS: VPN 1 & STAINLESS STEEL VPN 3, 4 & 5 - INCONEL X750 ALL VMF - CHROME STEEL VMN 1 & 2 - CHROME STEEL HMN 1,2 & 3 - STEEL DISC S ZINC PLATED WITH STAINLESS STEEL GUIDE 39PV & 39MV - CHROME STEEL 49PV & 49MV - CHROME STEEL
10 TITLE: SELECTION CHART FOR 3900 & 4900 PILOTS DATE: 12/14/00 PAGE 10 OF 10 R E V I S I O N S H E E T REVISIONS MADE TO THIS INSTRUCTION ARE LISTED IN DETAIL AND CHRONOLOGICAL ORDER RELEASE NO. & DATE REV. NO. DESCRIPTION GC369 02/05/98 1 REVISED & TRANSFERRED TO NEW STD. FORMAT ON PC. PAGE 3: ADDED NEW PAGE 3 FOR MORE SELECTIONS. PAGE 4: RENUMBERED PAGE 3 TO 4. ADDED MATERIALS 39PV & 39MV TO PAGE 4. GC727 01/06/99 2 PAGE 1: REVISED PARAGRAPH 1.1. ADDED MPV07-2. PAGE 3:, 39PV07LS-2 WAS 39PV01LS. 39PV07GS-2 WAS 39PV01GS, 39MV07LS-2 WAS 39MV01LS, 39MV07GS-2 WAS 39MV01GS. GC879 04/06/99 3 PAGE 3: REINSERTED 39PV07/07/37-1 & 39MV01/07/37-1 CHARTS. WAS DELETED FROM PREVIOUS CHART. PAGE 4: ADDED 39MV07/37-2 & 39PV07/37-2 TO COLUMN. FK679 12/08/99 FK139E 03/16/00 4 PAGE 4: ADDED BLOCK -ADJUSTED S FOR 39PV07-2 & 39MV TO 750 PSIG. 5 PAGE 1: ON TITLE, ADDED ON PARA. 1.1, ADDED 4900 PILOTS & 49MV07/37-1 & 49PV07/37-1. ADDED NEW PAGE 6 & 7, FOR 4900 FOR. PAGE 8: ON NOTE, ADDED 49PV & 49MV. FL819A 08/09/00 FM373 12/14/00 6 PAGE 7: ADDED 49PV55-1-LS &GS. ADDED 49MV55-1-LS & GS. 7 PAGE 7: ON 49PV55-1-LS & GS & 49MV55-1-LS & GS, ON COLUMN, 3750 WAS 375. ON, PC90CR WAS PC9CR. DELETED PV70CR FROM COLUMN.
Consolidated* Series
Technical Specifications Rev. C - 10/2018 Consolidated* 2900-40 Series Pilot-Operated Safety Relief Valve BHGE Data Classification : Public Table of Contents Conversion Table...2 Scope of Design...3 Main
Pressure Relief Valves MPV Series. Consolidated Pilot Operated Safety Relief Valve
Pressure Relief Valves 2900 MPV Series Consolidated Pilot Operated Safety Relief Valve Table of Contents Conversion Table... 2900.2 Features & Benefits... 2900.3 Scope of Design... 2900.4 Main Valve Materials...
ENGINEERING PROCEDURE
ENGINEERING PROCEDURE TITLE: SPRING SELECTION PROCEDURE Styles JLT-JOS-E, JLT-JOS (For Liquid Only) NOTE: This spring selection procedure and the data contained herein is proprietary to Crosby Valve Inc.
2900 Pilot Operated Relief Valve
0 MPV 0 Pilot Operated Relief Valve Consolidated offers a unique pilot valve design that combines p performance, capabilities and features within an economical, modular assembly. Consolidated has accomplished
Table of Contents. 1900/P3 Series Exposed spring design - The spring in this design is exposed for atmospheric cooling. D through T orifice sizes.
Scope of Design Table of Contents Scope of Design...............................................................1900P.1 Materials 1900/P1 (Conventional)......................................................1900P.3
Pressure Relief Valves. 1541/1543 Series. Consolidated Safety Valve
Pressure Relief Valves 1541/1543 Series Consolidated Safety Valve Table of Contents Conversion Table 1541/1543.2 Features & Benefits 1541/1543.3 Applications 1541/1543.3 Scope of Design 1541/1543.4 Materials
2900 MPV Series. Consolidated * Valves. Pilot-Operated Safety Relief Valve
Technical Specifications Rev.A - 07/2018 Consolidated * Valves 2900 MPV Series Pilot-Operated Safety Relief Valve A unique design that combines top performance, capabilities and features within an economical,
2900 MPV Series. Consolidated * Valves. Pilot-Operated Safety Relief Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 2900 MPV Series Pilot-Operated Safety Relief Valve A unique design that combines top performance, capabilities and features within an
Table of Contents. Introduction. Description. Greater Total System Efficiency. Improved Design. Easy Installation and Maintenance
Features & Benefits Table of Contents Features & Benefits................................................................ 13900.1 Scope of Design...................................................................
Consolidated* 3900 MPV Series Pilot-Operated Safety Relief Valve
GE Oil & Gas Technical Specifications 08/2016 Consolidated* 3900 MPV Series Pilot-Operated Safety Relief Valve A unique design that combines enhanced performance, capabilities and features within an economical,
13900 Series. Consolidated * Valves. Pilot-Operated Safety Relief Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 13900 Series Pilot-Operated Safety Relief Valve Designed specifically for high capacity steam applications, this series of valves contributes
PRODUCT SPECIFICATION
PROUCT SPECIFICATION TABLE OF CONTENTS 1.0 SCOPE 2.0 PROUCT ESCRIPTION 3.0 APPLICABLE OCUMENTS AN SPECIFICATIONS 4.0 RATINGS 5.0 PERFORMANCE 5.1 ELECTRICAL PERFORMANCE 5.2 MECHANICAL PERFORMANCE 5.3 ENVIRONMENTAL
3900 MPV Flanged Valves comply with:
Agency Review 00 MPV Features / Scope of Design Table of Contents Features / Scope of Design........................................................00.1 Main Valve s............................................................00.7
E/ECE/324/Rev.2/Add.105/Rev.2/Amend.5 E/ECE/TRANS/505/Rev.2/Add.105/Rev.2/Amend.5
E/ECE/324/Rev.2/Add.105/Rev.2/Amend.5 E/ECE/TRANS/505/Rev.2/Add.105/Rev.2/Amend.5 27 April 2018 Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles,
Series Low Pressure Steam Boiler Safety Valves
14-200 Series Low Pressure Steam Boiler Safety Valves ASME Section IV Set pressures from 5 to 15. Sizes 2", 2-1/2" and 3". Section IV Heating Boilers Applications: The 14 Series is an ASME Section IV high
TECHNICAL MANUAL OPERATOR, ORGANIZATIONAL, DIRECT AND GENERAL SUPPORT MAINTENANCE MANUAL
TM 5-4310-348-14 TECHNICAL MANUAL OPERATOR, ORGANIZATIONAL, DIRECT AND GENERAL SUPPORT MAINTENANCE MANUAL COMPRESSOR, AIR, RECIPROCATING, ELECTRIC MOTOR DRIVEN, RECEIVER MOUNTED, 2HP, 5CFM, 175 PSI, (INGERSOLL-RAND
YStrainers. Applications. Pressures to 3705 PSIG Temperatures to 800ºF FEATURES MATERIALS END CONNECTIONS RATINGS SIZES
Applications Process Industry Metals and Mining Power Industry Water and Waste Chemical Industry Pulp and Paper Oil and Gas YStrainers Pressures to 3705 PSIG Temperatures to 800ºF FEATURES Low pressure
3900 Pilot Operated Relief Valve
00 Pilot Operated Relief Valve Consolidated offers a unique pilot valve design that combines top performance, capabilities and features within an economical, modular assembly. Consolidated has accomplished
1541/1543 Series. Consolidated * Valves. Safety Valve
GE Oil & Gas Technical Specifications 11/2014 Consolidated * Valves 1541/1543 Series Safety Valve Designed for steam and other compressible fluids, these valves are most commonly used in pharmaceutical,
Pressure Relief Valves Series. Consolidated Safety Valve
Pressure Relief Valves 1511 Series Consolidated Safety Valve Consolidated Type 1511 safety valves are designed for low pressure, steam heating boilers and steam generators as well as air service applications.
ENTERY INDUSTRIAL CO., LTD. E&T ELECTRONICS (DONG GUAN) CO., LTD. E&T ELECTRONICS (SU ZHOU) CO., LTD.
TO SPECIFICATION FOR APPROVAL DESCRIPTION: Pitch 1.00mm Non-ZIF FPC Connector, R/A, SMT Type Dual CUSTOMER PROD.NO/DWG.NO: E&T PROD.NO: 7182K-XXXN-00X APPROVAL SHEET NO: E&T DWG. NO./DOCUMENT: 7182K-XXXN-00X
SPECIFICATION SHEET P600L CURRENT LIMITING FUSE
11525 Sorrento Valley Rd. San Diego, California 92121 (858) 481-0210 SPECIFICATION SHEET P600L CURRENT LIMITING FUSE REVISION: A B C D E F G H J K DATE: 11/87 5/90 5/92 7/94 6/95 12/95 6/96 1/97 11/99
Consolidated. Consolidated Pilot Operated Safety Relief Valve Type 2900 Series INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Consolidated INSTALLATION, OPERATION AND MAINTENANCE MANUAL Consolidated Pilot Operated Safety Relief Valve Type 2900 Series MPV Modular Pilot Valve Types 39MV07-2 39MV37-2 39PV07-2 39PV37-2 Series 2900
TM T.O. 38G
T.O. 38G1-48-12-2-1 TECHNICAL MANUAL VOLUME 2 OF 2 PART 1 OF 2 MAINTENANCE DIRECT SUPPORT AND GENERAL SUPPORT LEVEL ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED,
DEPARTMENT OF THE ARMY TECHNICAL MANUAL OPERATOR AND ORGANIZATIONAL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) FOR
TM 9-4910-389-12 DEPARTMENT OF THE ARMY TECHNICAL MANUAL OPERATOR AND ORGANIZATIONAL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) FOR CLEANER AND TESTER, SPARK PLUG: BENCH MOUNTED
TECHNICAL MANUAL UNIT, INTERMEDIATE DIRECT SUPPORT AND INTERMEDIATE GENERAL SUPPORT MAINTENANCE MANUAL
TM 5-3820-256-24-1 TECHNICAL MANUAL UNIT, INTERMEDIATE DIRECT SUPPORT AND INTERMEDIATE GENERAL SUPPORT MAINTENANCE MANUAL DRILLING SYSTEM, WELL, ROTARY, TRUCK MOUNTED, AIR TRANSPORTABLE, 600 FEET CAPACITY
Crosby Series 800 and 900 OMNI-TRIM Pressure Relief Valves. Flow Control
Crosby s Series 800 adjustable blowdown and Series 900 fixed blowdown OMNI-TRIM full nozzle pressure relief valves have a simplified, single trim design with superior application versatility. Features
P68 Variants. Equipped With Lycoming Engine Model IO-360-A1B or IO-360-A1B6 NOR MAINTENANCE MANUAL SUPPLEMENT
Equipped With Lycoming Engine Model IO-360-A1B or IO-360-A1B6 NOR10.771-27 SUPPLEMENT ENGINE AIR INTAKE FILTER P/N BA-162-E (For aircraft embodying change No. MOD.P68/50 or Service Bulletin No. 124) LIST
SAFETY relief VALVE SERIES # 006 DESIGN FEATURES HARSHAD ENGINEERING WORKS HARSHAD ENGINEERING WORKS TECHNICAL DATA : ISO 9001 CERTIFIED COMPANY
PROVIDES HIGH QUALITY OVERPRESSURE PROTECTION FOR AIR, GAS, LIQUID & STEAM IN SINGLE STANDARDIZED DESIGN SAFETY relief VALVE DESIGN FEATURES SAFETY VALVE MANUFACTURED IN ACCORDANCE WITH REQUIREMENT OF
PRESSURES TO 740 PSIG (51 BARG) TEMPERATURES TO 800 F (427 C) MODELS. 300Y Series Ordering Code. Add l Inlet Size Model Body Dash Perf Mesh Require-
APPLICATIONS Steam, liquid, gas and oil service Power industry Pulp and paper Chemical industry Process Equipment Metal & Mining Water & Waste OPTIONS Other perforated screens and mesh liners Other drain
PRESSURES TO 285 PSIG (19.7 BARG) TEMPERATURES TO 750 F (390 C) MODELS. 150Y Series Ordering Code
APPLICATIONS Steam, liquid, gas and oil service Power Industry Pulp & Paper Process Equipment Chemical Industry Metal & Mining Water & Waste OPTIONS Other perforated screens and mesh liners Other drain
REVISIONS App PC. App Sud. App Thom TC 2014/03/25
/9 Rev Description Document format and number changed. Previous number 543-0.0.30 Rev n by TC 204/03/25 Sud TC 204/03/25 REVISIONS PC Thom VB LH Clyd r Act Issue Date YYYY/MM/DD Pending Pending Pending
DRILLING SYSTEM, WELL, ROTARY, TRUCK MOUNTED, AIR TRANSPORTABLE, 600 FEET CAPACITY MODEL LP-12 NSN
TM 5-3820-256-24-6 TECHNICAL MANUAL UNIT, INTERMEDIATE DIRECT SUPPORT AND INTERMEDIATE GENERAL SUPPORT MAINTENANCE MANUAL DRILLING SYSTEM, WELL, ROTARY, TRUCK MOUNTED, AIR TRANSPORTABLE, 600 FEET CAPACITY
5801 Series. Flanged Ball Valves, API 607 Firesafe. ASME Class 150, Flanged Ends. Reduced Port. 2-pc, Split Body. Carbon or Stainless Steel
langed Ball Valves, API 67 iresafe ASME Class 1 81 Series eatures Investment cast 2-piece bolted body construction Blow-out proof stem Reinforced seats Adjustable, live-loaded graphite packing API 98 inspection
Best Under Pressure 3500 EBV. Safety Valve Oct 2008-CO
est Under Pressure 300 EV Safety Valve www.dresser.com 300 Oct 2008-CO 742 resser 300.qxd 9/29/0 8:10 AM Page 1 300 Scope of esign The CONSOIATE Series 300 Electromatic all Valve is designed to provide
Kunkle Models 189/363/389 safety valves Safety and relief products
Heavy duty ASME Section VIII, air/gas cryogenic, UV, National Board certified safety valves Model 189 Features Heavy duty construction provides long service life. Unique three-piece disc assembly with
Series Low Pressure Steam Heating Boiler Safety Valves
12-200 Series Low Pressure Steam Heating Boiler Safety Valves Section IV Heating Boilers Medium capacity safety valves protect ASME Section IV low pressure steam heating boilers. Cast bronze, full nozzle
Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure
Series Thermal Relief Safety Valves Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure Applications The Sempell series provides a complete and comprehensive range
2/2. Air or Water Pilot Operated Angle Body Multi-Purpose Valves. Bronze or 316L Stainless Steel Bodies 3/8" to 2 1/2" NPT.
4 Air or Water Pilot Operated Angle ody Multi-Purpose Valves ronze or 36L Stainless Steel odies 3/8" to 2 /2" NPT 2/2 SRIS 82 The 82 Series consists of 2-way direct acting valves available in normally
RESOLUTION MEPC.278(70) (Adopted on 28 October 2016) AMENDMENTS TO THE ANNEX OF THE PROTOCOL OF 1997 TO AMEND THE INTERNATIONAL CONVENTION FOR THE
RESOLUTION MEPC.278(70) (Adopted on 28 October 2016) AMENDMENTS TO THE ANNEX OF THE PROTOCOL OF 1997 TO AMEND THE INTERNATIONAL CONVENTION FOR THE PREVENTION OF POLLUTION FROM SHIPS, 1973, AS MODIFIED
INFINITE ENERGY 2-199
3" AIR 3" FLUE RSUB-191 1 1/2" NPT 1" NPT 1 1/2" NPT FRONT VIEW Fuel Type Natural/Propane Gas Boiler FLA.92* Input BTU/hr. 200,000 / 59 kw Min. Gas Pressure Required 3" W.C.** Output BTU/hr. 183,600 /
CEMA PT16 N09Rev2. Reference document: ENTR_F1_ _rev 16 v Article / clause Original text Proposal from CEMA Rationale and
CEMA PT16 N09Rev2 Reference document: ENTR_F1_030-99_rev 16 v030908 Article / clause Original text Proposal from CEMA Rationale and Art., clause 7 The fitment of anti-lock braking systems (ABS) is not
Suction Diffusers. Applications PROTECTION PUMP. Pressures to 790 PSIG Temperatures to 800ºF FEATURES MATERIALS END CONNECTIONS SIZE RANGES RATINGS
Applications Process Industry Metals and Mining Power Industry Water and Waste Chemical Industry Pulp and Paper Oil and Gas Suction Diffusers Pressures to 790 PSIG Temperatures to 800ºF FEATURES Filtration
Section Va: Valve Actuators
Valve and Actuator Manual 977 Actuator Basics and Sizing Information Section Engineering Data Book Va Issue Date 0592 Section Va: Valve Actuators Pneumatic Actuators Page 3 Electric Actuators 5 Maximum
Inspection Services Design Appraisal Document
Issue Number: 1 Page 1 of 5 Client : Groth Corporation Subject : Pressure / Vacuum Relief Valves Model Series 1200, 1300, 1400, 1600, 1700 & 1800 Pressure Equipment Type : Safety Accessory PED Category
ENGINE, AIRCRAFT, GAS TURBINE MODEL T63-A-720 P/N NSN
TM 55-2840-241-23 TECHNICAL MANUAL AVIATION UNIT AND AVIATION INTERMEDIATE MAINTENANCE MANUAL ENGINE, AIRCRAFT, GAS TURBINE MODEL T63-A-720 P/N6887191 NSN 2840-01-013-1339 HEADQUARTERS, DEPARTMENT OF THE
TM &P TECHNICAL MANUAL
TECHNICAL MANUAL TM 9-2330-376-14&P OPERATOR S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS) FOR CHASSIS, TRAILER: 5-TON, 4-WHEEL,
Wegmans Fairfax Joseph B. Lookup Electrical System Existing Conditions Report & Building Load Summary Report. Appendix Tech Assignment # 2
Wegmans Fairfax Joseph B. Lookup Electrical System Existing Conditions Report & Building Load Summary Report Appendix Tech Assignment # 2 I Wegmans Fairfax Joseph B. Lookup Electrical System Existing Conditions
AGREEMENT. (Revision 2, including the amendments entered into force on 16 October 1995) Addendum 102: Regulation No. 103
21 March 1997 AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR
TECHNICAL MANUAL M149A2. This manual supersedes TM &P, dated February 1981, and all changes.
TECHNICAL MANUAL TM 9-2330-267-14&P OPERATOR S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS) FOR TRAILER, TANK, WATER: 400 GALLON,
TECHNICAL MANUAL UNIT, INTERMEDIATE DIRECT SUPPORT AND INTERMEDIATE GENERAL SUPPORT MAINTENANCE MANUAL
TM 5-3820-256-24-4 TECHNICAL MANUAL UNIT, INTERMEDIATE DIRECT SUPPORT AND INTERMEDIATE GENERAL SUPPORT MAINTENANCE MANUAL DRILLING SYSTEM, WELL, ROTARY, TRUCK MOUNTED, AIR TRANSPORTABLE, 600 FEET CAPACITY
Type. Facts. Flanged Safety Relief Valves spring loaded PMetric + US Units. The-Safety-Valve.com
Type 26 Flanged Safety Relief Valves spring loaded Metric + US Units Facts The-Safety-Valve.com Type 26 Orifice Selection charts 1 x 1 3L x 1 3 x 1 6 x 1 9 x 1 1 x 1 2 x 3 WCB 262.64X 262.646X 262.647X
ANNEX 3. RESOLUTION MEPC.278(70) (Adopted on 28 October 2016)
Annex 3, page 1 ANNEX 3 RESOLUTION MEPC.278(70) (Adopted on 28 October 2016) AMENDMENTS TO THE ANNEX OF THE PROTOCOL OF 1997 TO AMEND THE INTERNATIONAL CONVENTION FOR THE PREVENTION OF POLLUTION FROM SHIPS,
TM DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR. HEADQUARTERS, DEPARTMENT OF THE ARMY August 1978 Change 2
DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR HULL, SUSPENSION, AND MISCELLANEOUS HULL COMPONENTS OF THE ARMORED RECONNAISSANCE/AIRBORNE ASSAULT VEHICLE: FULL-TRACKED, 152-MM GUN/LAUNCHER M551A1
Schedule GS-1 SMALL GENERAL SERVICE
I. APPLICABILITY AND AVAILABILITY II. A. Except as modified herein, this schedule is applicable only to a non-residential Customer (1) who elects (a) to receive Electricity Supply Service and Electric
Compac-Noz Valves High Performance Non-Slam Check Valves
Compac-Noz Valves High Performance Non-Slam Check Valves Compac-Noz Non-Slam Check Valves Scope of Line and Features Sizes 12" - 60" ASME B16.34 & API 6D, pressure classes 150-4500 API 6A pressure classes
Kunkle Safety and Relief Products Models 6252 and 6254
ASME Section I Steam and ASME Section VIII, Air, Steam and Gas UV National Board Certified. Model 6254 ASME Section IV HV, National Board Certified. PED Certified for Non-Hazardous Gas. Features Heavy
TYPE D50 PRESSURE REDUCING VALVE REDUCING VALVE D50 PRESSURE. PRESSURES to 300 PSIG at 420 F
D PRESSURE REDUCING VALVE TYPE D PRESSURES to 3 PSIG at 42 F Direct Acting Steam, Water or Gas Spherical Seating Surface on Floating Stainless Steel Disc for Tight Shutoff Four Spring Ranges Integral Stainless
TECHNICAL DATASHEET FLOWSEAL MS - Triple Offset Valves ASME/Imperial
brands you trust. TECHNICAL DATASHEET FLOWSEAL MS - Triple Offset Valves ASME/Imperial Index & Model Numbers for Gears with Hand Wheel Model Numbers for Gears with Hand Wheels...2 Figure Number System...3
... Introduction Scope Test Equipment Procedure
BC3000-0001 Field Calibration Procedures... Introduction......................................................................1-30-01 Scope..........................................................................1-30-01
* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 00, 00 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 00 adjustable blowdown, Series 00 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have a
VALVES Pressure Operated Stainless Steel Body Threaded Ports, 3/8 to 2 1/2
VALVES Pressure Operated Stainless Steel Body Threaded Ports, / to / NC NO / Series E90 FEATURES High flow due to angled seat design Antiwaterhammer design (fluid entry under the disc) Vacuum operation
Electronic Ball Valve Guide Specifications
Electronic Ball Valve Guide Specifications Control Valve Assemblies Ball Valve Bodies All ball valves used for modulating or floating (tri-state) control must be furnished with a stainless steel ball &
Features Globe Valve 2-Way & 3-Way Assembly Features:
Rev: 10/22/13 Features Globe Valve 2-Way & 3-Way Assembly Features: DG Series Automated Applications for Building Automation, Temperature Controls, HVAC Two-Way and Three-Way Assemblies Chilled Water Hot
Compressor Medo. Some STATIM L / 5000 / 5000S units have been manufactured with an additional bacteria-retentive air filter.
Compressor Medo Some STATIM L / 5000 / 5000S units have been manufactured with an additional bacteria-retentive air filter. Units without the bacteria-retentive air filter draw air through the cylindrical
Amendment No July 2015 AIS-050: 2004
Amendment No. 2 14 July 2015 To AIS-050: 2004 Requirements for Vehicles with regard to Selection and Approval for use of Tyres for Two and Three-Wheelers 1. Title of the standard. Substitute following
SECTION S DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES
SECTION S DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES DESCRIPTION STANDARD COMPLIANCE/CERTIFICATIONS S-2 ADVANTAGES S-3 PAGE SOFT SEAT EXPLODED VIEW S-4 FIRE SAFE SEAT EXPLODED VIEW S-5 METAL SEAT
13000 series Professional quick-break momentary pushbutton switches
Distinctive features and specifications PC and panel mount models ushing Ø 6,35 (1/4) and 11,9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : -
GETWELL TECH.(H.K.) LTD.
GETWELL TECH.(H.K.) LTD. 2.5 Pitch 4 Pin Battery Connector Product Specification PART No: DC-0010S00-067-102 Rev.: A Page:1/ 5 Approved/Date Checked/Date Written/Date 1.0 Scope : This specification covers
SPECIFICATION SHEET P700L CURRENT LIMITING FUSE SURFACE MOUNT MODEL
11525 Sorrento Valley Rd. San Diego, California 92121 (858) 481-0210 SPECIFICATION SHEET P700L CURRENT LIMITING FUSE SURFACE MOUNT MODEL REVISION: A B C D E F G H J DATE: 10/95 2/96 2/00 10/95 2/96 10/98
SECTION S - DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES TABLE OF CONTENTS. Standard Compliance/Certifications S-2 Advantages S-3
SECTION S - DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES TABLE OF CONTENTS DESCRIPTION Standard Compliance/Certifications S-2 Advantages S-3 PAGE Soft Seat Exploded View S-4 Fire Safe Seat Exploded
Economic and Social Council
United Nations Economic and Social Council Distr.: General 20 February 2014 Original: English Economic Commission for Europe Inland Transport Committee World Forum for Harmonization of Vehicle Regulations
Cold Resistance (Ohm) Note 1
P700L Series Part Numbering System P700L - 72-1.0 Fuse Type Voltage Amp Part Number/Rating Cold Resistance (Ohm) Note 1 Overload Interrupt Time (Second) Nominal Rating - Note 2/3 Maximum I 2 T (Ampere
Bray/McCannalok High Performance Butterfly Valves Technical Manual
Bray/McCannalok High Performance Butterfly s TM123-6/1/215 TABLE OF CONTENTS Seating & Unseating Torques 1 ASME 15 - Torques (Lb-in) 2 ASME 15 - Torques (Lb-in) 3 ASME 3 - Torques (Lb-in) 4 ASME 6 - Torques
INTERVALVE (ENGINEERING DATA SHEET)
GENERAL FEATURES PRODUCT SPECIFICATION MATL. OF CONSTRUCTION OPERATION Title VALVE TYPE VALVE MODEL DESCRIPTION DESIGN, MFG. STD. INTERVALVE (ENGINEERING DATA SHEET) Product Specification for IVEX - F
Property of American Airlines
Rev No. Issue Date Date Inserted Initial 1 01/31/07 1/31/07 NMC- 2 07/31/07 07/31/07 NMC- 3 08/31/08 08/31/08 NMC- 4 08/15/11 08/15/11 NMC- 5 02/04/13 02/04/13 NMC- 6 12/15/13 12/15/13 NMC- 7 03/31/14
SV80H Safety and Relief Valves
Page 1 of 18 BR Rev.02 U SH Safety and Relief alves Description The SH is a full nozzle safety and relief valve with orifices D to T, comply with the API STD 526, beyond others with super capacity. Suitable
Michigan State University Construction Standards. GENERAL-DUTY VALVES FOR PLUMBING PIPING Page
Page 220523-1 SECTION 220523 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
Model DF100 Control Valve
FEATURES NACE Service Ready Standard construction for the DF100 control valve features NACE trim. The valve bonnet and body also conform to NACE MR0175 (National Association of Corrosion Engineers) recommendations.
TM &P TECHNICAL MANUAL
TECHNICAL MANUAL TM 9-1095-204-13&P OPERATOR S, ORGANIZATIONAL, AND DIRECT SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) ANTITANK MINE DISPENSING SYSTEM M57 (NSN 1095-00-169-0300)
Draft Indian Standard SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION
Comments Only BUREAU OF INDIAN STANDARDS Draft Indian Standard Doc:PCD 3(2537)C September 2012 SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION Not to be reproduced without the permission
TECHNICAL MANUAL OPERATOR S ORGANIZATIONAL SIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL METER TEST SETS TS-682/GSM-1 AND TS-682A/GSM-1
TECHNICAL MANUAL OPERATOR S ORGANIZATIONAL SIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL METER TEST SETS TS-682/GSM-1 AND TS-682A/GSM-1 (NSN 6625-00-669-0747) This copy is a reprint which includes
Type. Facts. Flanged Safety Relief Valves spring loaded TMetric + US Units. The-Safety-Valve.com
ype 26 Flanged Safety Relief Valves spring loaded Metric + US Units Facts he-safety-valve.com ype 26 Orifice Selection charts 1 x 1 3L x 1 3 x 1 6 x 1 9 x 1 x 1 2 x 3 WCB 262.67X See 3 x 1 262.676X WC6
Interior Trunk Release
TECHNICAL STANDARDS DOCUMENT No. 401, Revision 2R Interior Trunk Release The text of this document is based on Federal Motor Vehicle Safety Standard No. 401, Interior Trunk Release, as published in the
5801 Series. Flanged Ball Valves, API 607 Firesafe. ASME Class 150, Flanged Ends. Full Port. 2-pc, Split Body. Carbon or Stainless Steel
langed Ball Valves, API 67 iresafe ASME Class 1 81 Series eatures Investment cast 2-piece bolted body construction Blow-out proof stem Adjustable, live-loaded graphite packing API 98 inspection and testing
BULLDOZER, EARTH MOVING: TANK MOUNTING, M9 ( )
TECHNICAL MANUAL OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) FOR BULLDOZER, EARTH MOVING: TANK MOUNTING, M9 (2590-00-708-3563)
Fabricated Duplex Strainers
Applications Chemical Industry Metals & Mining Process Industry Water & Waste Water Power Industry Pulp & Paper Oil & Gas Fabricated Duplex Strainers Pressures to 1480 PSIG Temperatures to 800ºF FEATURES
T101J1ZQE2 T201J1ABE2 T101J1AVBE2 T101J1V3BE2. models available, see page B-52.
T101J1ZQE2 T201J1AE2 T101J1AVE2 T101J1V3E2 models available, see page -52. Easy uild-a-switch elow is a complete listing of available options for T SERIES TINY ROCKER SWITCHES. uild-a-switch allows you
Product Catalog. Rev. 612 r1
Product Catalog Rev. 612 r1 PIPE FITTINGS CONDUIT FITTINGS PRODUCT CATALOG Pipe Nipples Welded and Seamless Carbon Steel 2 Pipe Nipples Welded and Seamless Stainless Steel 3 Pipe Nipples End Finishes 4
304C. Valve Group. Series Farris Engineering Pressure Relief Valves
304C Valve Group Series 600 Farris Engineering Pressure Relief Valves Type Numbering System Our type numbering system simplifies the selection and specifying of Farris pressure relief valves because the
56-SDMS-07 REV. 01 SPECIFICATIONS FOR
56-SDMS-07 REV. 01 SPECIFICATIONS FOR UNIT SUBSTATIONS UP TO 36 kv ALUMINUM TRANSFORMER ALUMINUM BUS BARS LVDP This specification is property of SEC and subject to change or modification without any notice
Project Title. Project Detail
Project Title : Noise Level measurement during Inspection of Transport Air Compressor at Atlas Copco works with suitable correction factors to meet 85 db (A) at 1 meter distance in free field condition
AIR/VACUUM VALVE AND OPTIONAL ANTI-SLAM DEVICE SPECIFICATION
AIR/VACUUM AND OPTIONAL ANTI-SLAM DEVICE SPECIFICATION Scope. This specification is intended to cover the design, manufacture, and testing of / in. (3 mm) through 0 in. (00 mm) Air/Vacuum Valves suitable
TECHNICAL MANUAL OPERATOR S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL FOR
TECHNICAL MANUAL OPERATOR S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL FOR SEMITRAILER, TANK: 5000 GALLON, (POTABLE WATER DISPENSING) XM1098 (NSN 2330-01-330-2779) Approved for public
FAIRCHILD T5200 SERIES ELECTRO-PNEUMATIC TRANSDUCER Installation, Operation and Maintenance Instructions
FAIRCHILD T500 SERIES ELECTRO-PNEUMATIC TRADUCER Installation, Operation and Maintenance Instructions Identification Number Underwriting Group Factory Mutual Canadian Standard T (F) (C) 500- Approval Class
Reproduction. Not for. Electric Pressure Washer. Illustrated Parts List. Model Mfg. No. Description ,800 PSI Briggs & Stratton
Illustrated Parts List Electric Pressure Washer Model Mfg. No. Description 020358-0 1,800 PSI Briggs & Stratton This pressure washer is rated in accordance to the Pressure Washer Manufacture Association
IFC Series DR Retainerless Dual Disc Check Valves
IF Series DR Retainerless Dual Disc heck Valves 6 1 2 3 4 9 7 8 5 10 Design Features Retainerless design meets industry fugitive emissions control requirements. This design eliminates the potential leak
Ball Valves in cast 316 SS multi-port, bolted construction
65 Ball Valves in cast 36 SS, bolted construction Type 65 can be combined with 800 PSI WOG Thread, socket and butt weld ends Full port to Sch 40 pipe 3/4/5 ports in L, X, T or I pattern Range of seal options
Vulcan Parallel Spring O -Ring Mounted Seals. Section
Vulcan Parallel Spring O -Ring Mounted Seals Section Introduction The Vulcan Type 9X mechanical seals are robust, general purpose, parallel spring, pusher type seals, designed to suit standard metric and
Evans SS-G & GXL -Series Integrated Stainless Gas Sticks
SS-G & GXL -Series Integrated Stainless Gas Sticks Features G & GXL Series 316SS CF8M Body Construction Cleaned and packaged in cleanroom 2-PC Design G-series allows for isolation and removal of regulator