Stock Price List S $50 Minimum Order
|
|
|
- Cornelius Horn
- 5 years ago
- Views:
Transcription
1 Standard Saws (Rip, Cut-Off, Trim, Etc.) / Saw Bodies for Carbide Tipping Number (Inches) Teeth.000" Gauge (Inches) Hook (Inches) Special / x.063 NO SLOTS / x.063 NO SLOTS / x.063 NO SLOTS / x.063 NO SLOTS / / x.055 NO SLOTS / / x.051 NO SLOTS / x / x / x / /8 SKIL x.063 SKIL / /8 SKIL x.063 SKIL / x / /8 SKIL x.063 SKIL / /8 SKIL x.063 SKIL / /8 SKIL x.063 SKIL / x / x / x / x / x / x / x / x / x / x / x / x / x / x CU / x / x / x / x / x / x CU Page 1 Standard Saw Bodies
2 Standard Saws (Rip, Cut-Off, Trim, Etc.) / Saw Bodies for Carbide Tipping Number (Inches) Teeth.000" Gauge (Inches) Hook (Inches) Special / x / x / x / x / x / x CU / x / x CU / x / x CU / x CU / x / x / x CU / x CU / x CU / x x.087 NO SLOTS x CU x CU x CU / x.079 Mereen-Johnson Rip x CU x CU x CU x CU x CU x CU x CU x CU / x.079 Mereen-Johnson Rip x CU / x.079 Mereen-Johnson Rip x CU x CU x CU Page 2 Standard Saw Bodies
3 Standard Saws (Rip, Cut-Off, Trim, Etc.) / Saw Bodies for Carbide Tipping Number (Inches) Teeth.000" Gauge (Inches) Hook (Inches) Special x CU x CU x CU x CU x CU / x CU x CU x CU x CU x CU x CU x CU x CU / x CU x.063 4CU x CU x CU x CU x CU x CU x CU x CU x CU x CU x CU x CU x CU x CU x CU x CU x CU x CU/PH - Diehl x CU x CU x CU Page 3 Standard Saw Bodies
4 Standard Saws (Rip, Cut-Off, Trim, Etc.) / Saw Bodies for Carbide Tipping Number (Inches) Teeth.000" Gauge (Inches) Hook (Inches) Special x CU x CU x CU x CU x CU x CU x CU x CU x CU x CU x CU x CU x CU x CU x CU x CU/PH - Diehl x CU x CU x CU x CU x CU x CU x CU x CU x CU x CU x CU x CU x CU x CU x CU x CU x CU x CU Page 4 Standard Saw Bodies
5 Standard Saws (Rip, Cut-Off, Trim, Etc.) / Saw Bodies for Carbide Tipping Number (Inches) Teeth.000" Gauge (Inches) Hook (Inches) Special x CU x CU / x CU x CU / x CU x CU / x CU x CU / x CU x CU / x CU x CU / x CU x CU x CU / x CU x CU / x CU x CU / x CU x CU x CU / x CU x CU / x CU x CU / x CU x CU Page 5 Standard Saw Bodies
6 Edger Saws with Two Large Outside Slots / Saw Bodies for Carbide Tipping Pendu Number (Inches) Teeth.000" Gauge (Inches) Hook (Inches) Keyway / Pinholes / x.063 3/8 Sq / x.063 3/8 Sq / x.063 3/8 Sq / x.063 3/8 Sq / x.063 3/8 Sq / x.063 3/8 Sq / x.063 3/8 Sq / x.063 3/8 Sq Hazelthorn x.063 1/4 Rd x.063 1/4 Rd x.063 1/4 Rd x.063 1/4 Rd Brewer, Woodcraft, Quality / x.063 ** / x.063 ** / x.063 ** / x.063 ** / x.063 ** / x.063 ** *Above Brewer Bodies have one 1/2" KW (Rd.) and two 3/8" KW (Rd.) to fit both old and new machine Cornell / x.063 PH 3/8 on 4-3/8" / x.063 PH 3/8 on 4-3/8" x.063 PH 7/16 on 5" x.063 PH 7/16 on 5" x.063 PH 7/16 on 5" Page 6 Edger Saw Bodies
7 Saws for Non-Ferrous Metals / Saw Bodies for Carbide Tipping Number (Inches) Teeth.000" Gauge (Inches) Hook (Inches) Special / x.063 NO SLOTS / x.063 NO SLOTS / x CU /8 6 Neg..236 x CU / x CU /8 6 Neg..236 x CU /8 2 Neg..236 x CU /8 2 Neg..220 x CU / x.063 NO SLOTS / x CU Neg..236 x CU Neg..236 x CU x.063 4CU Neg..236 x CU x CU Page 7 Saw Bodies for Non-Ferrous Metals
8 Combination (Planer Style) Saws/ Saw Bodies for Carbide Tipping Number (Inches) Teeth.000" Gauge (Inches) Hook (Inches) Special / /8 SKIL x.063 SKIL / x / x x x x Thin-Rimmed Saws / Saw Bodies for Carbide Tipping Number (Inches) Teeth.000" Gauge (Inches) Hook (Inches) Special / x.063 RIM / x.063 RIM Metric Saws / Saw Bodies for Carbide Tipping Number (Millimeters) Teeth.000" Gauge (Millimeters) Hook (Inches) Special x.055 NO SLOTS/GIBEN x.055 2/PH, VAR.MFG x.055 4/CU, VAR.MFG x.055 4/CU, VAR.MFG x.055 6/CU+CS, GIBEN Page 8 Combination (Planer Style) Thin-Rimmed Saw Bodies
9 Panel Saws / Saw Bodies for Carbide Tipping Number (Millimeters) Teeth.000" (Millimeters) (Millimeters) Hook (Inches) Special x.055 NO SLOTS/GIBEN x.063 No Slots, PH3/7/66, Var.Mfg x.063 No Slots, Holzma x.063 3/CU, Var.Mfg x.063 3/CU,PH.2/9/100, Var.Mfg x.055 3/CU, Holzma x.063 3/CU,PH.2/14/65, Var.Mfg x.055 2/PH, Var.Mfg x.055 4/CU,PH 2/7/42&2/10/60Var.Mfg x.055 4/CU, Var.Mfg x.063 4/CU,PH.2/10/60, Var.Mfg x.063 4/CU,PH.2/10/80, Holzma x.063 4/CU,PH.2/14/ x.055 6/CU+CS, GIBEN x.063 4/CU, Var.Mfg x.063 4/CU,PH.4/15/105, Var.Mfg x.063 4/CU, Holzma x.063 4/CU,PH.2/14/125, Holzma x.063 6/CU,PH.2/11/115, Holzma x.055 6/CU,PH.2/11/115 & 2/19/120,Var.Mfg Page 9 Panel Saw Bodies
10 Round Saw Blanks: Ground, Tensioned, Straightened, Not Toothed Catalog Diameter Number of Thickness Bore Number (Inches) Teeth.000" Gauge (Inches) / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Page 10 Round Saw Blanks
11 Stock Price List Round Saw Blanks: Ground, Tensioned, Straightened, Not Toothed Catalog Diameter Number of Thickness Bore Number (Inches) Teeth.000" Gauge (Inches) / / / / / / / / Page 11 Round Saw Blanks
12 Groover Bodies: Toothed & Round Blanks - for Carbide Tipping Number (Inches) Teeth (Inches) (Inches) Hook (Inches) Special /8 5/ /16 5/ /4 5/ /8 5/ /16 5/ /4 5/ /16 5/8 20 HRC /8 5/ x /8 5/ /16 5/ /4 5/ /16 5/8 20 HRC /8 5/8 20 HRC /16 5/8 20 HRC /2 5/8 20 HRC /8 5/ x /16 5/ x /8 5/ x /16 5/ x /16 5/ x /16 5/ x HRC /16 5/ x HRC /8 5/ /16 5/ /4 5/ /16 5/8 20 HRC /8 5/8 20 HRC /16 5/8 20 HRC /2 5/8 20 HRC /4 5/ x /8 5/ x HRC /16 5/ x HRC /2 5/ x HRC Page 12 Groover Saw Bodies
13 Groover Bodies: Toothed & Round Blanks - for Carbide Tipping Number (Inches) Teeth (Inches) (Inches) Hook (Inches) Special /8 5/ x /16 5/ x /4 5/ x /16 5/ x /4 5/ x / / / / HRC / HRC / HRC / HRC / x / x / x / x HRC / x HRC / x HRC / x / x / x / x HRC / x HRC / x HRC / x HRC / / / / HRC / HRC / HRC / HRC Page 13 Groover Saw Bodies
14 Groover Bodies: Toothed & Round Blanks - for Carbide Tipping Number (Inches) Teeth (Inches) (Inches) Hook (Inches) Special / x / x / x HRC / x HRC / x HRC / / / HRC / HRC Page 14 Groover Saw Bodies
15 Split-Scoring Saw Sets: Ready for Carbide Tipping Catalog Diameter Number of Thickness Bore Number (Millimeters) Teeth.000" (mm) (Millimeters) Hook Special S RIM.040/2PH S RIM.040/2PH S RIM.040/2PH S RIM.040/2PH S RIM.040/2PH S RIM.040/2PH S RIM.040/2PH S RIM.040/2PH S RIM.040/2PH S RIM.040/2PH S RIM.040/2PH Page 15 Split Scoring Saw Sets
16 Parquet Saws: Hard Chromium Plated, Ready to Use Catalog Diameter Number Thickness Bore Number (Millimeters) of teeth.000" (Millmeters) (Millimeters) Hook Special PARQUET SAW PARQUET SAW Saw Bushings: OD Knurled for Perfect Press Fit Catalog Outside Inside Thickness Number Diameter Diameter Gage Millimeters Special /8 3/ BUSHING /8 3/ BUSHING /8 3/ BUSHING /8 1/ BUSHING /8 1/ BUSHING /8 1/ BUSHING / BUSHING / BUSHING / BUSHING / BUSHING / BUSHING / BUSHING / BUSHING / BUSHING Page 16 Parquet Saws
17 Dado Sets: Ready for Carbide Tipping, Pocket Size.065 X.235" Each Set Consists oone Outer Saw - Thin Rimmed, Right Hand One Outer Saw - Thin Rimmed, Left Hand One Dado Filler - 1/16" Thick with 2 Teeth Two Dado Fillers - 1/8" Thick with 2 Teeth Each One Dado Filler - 1/4" Thick with 2 Teeth One sturdy wooden box for set Catalog Diameter Thickness Bore Seat Pocket Number (Inches).000" Gauge (Inches) Hook (Inches) Special DD1 6 S= / x.063 SAW RIM = DD1 8 S= / x.055 SAW RIM = DD2 8 S= x.063 SAW RIM = DD1 8 S= / x.063 SAW RIM = DD1 10 S= / x.055 SAW RIM = DD2 10 S= x.055 SAW RIM = DD1 10 S= / x.063 SAW RIM = DD1 12 S= x.063 SAW RIM = DD1 14 S= x.063 SAW RIM = "S=" Indicates teeth and thickness of outer saws. Single dado fillers: See next page Page 17 Dado Sets
18 Dado Fillers, Ready for Carbide Tipping Catalog Diameter Number Thickness Bore Seat Pocket Number (Inches) Of Teeth (Inches) (Inches) Hook (Inches) /16 5/ x /8 5/ x /4 5/ x /16 5/ x /8 5/ x /4 5/ x / x / x / x /16 5/ x /8 5/ x /4 5/ x / x / x / x / x / x / x / x / x / x Use these fillers ONLY with ORIGINAL Grasche DADO Sets Do NOT use OTHER fillers with ORIGINAL Grasche DADO Sets Page 18 Dado Fillers
19 Anvils for Saw Straightening with Crowned Precision Surface Catalog Diameter Height Weight Number (Inches) (Inches) (Pounds) Price Each ANVIL ANVIL ANVIL ANVIL Hammers for Saw Straightening with Crowned Precision Surface Catalog Weight Number Head Type (Pounds) Price Each HCRPE CROSS PEEN HDOHE DOGHEAD HCOMB COMBINATION HTWFA TWIST FACE HTWFA TWIST FACE Precision Straight Edges for Flatness Testing Catalog Length Number Item (Inches) Price Each STR - EDGE - SET - 1 SET OF FOUR LENGTHS: 7, 9, 11, STR - EDGE INDIVIDUAL: STR - EDGE INDIVIDUAL: STR - EDGE INDIVIDUAL: STR - EDGE INDIVIDUAL: STR - EDGE INDIVIDUAL: Saw Dial Indicators - Graduation.001" Catalog Number Model / Description Price Each DIAL - MODEL - A MODEL A. - LARGE ROUND ANVIL DIAL - MODEL - B MODEL B. - POINTED ANVIL DIAL - MODEL - C MODEL C. - CYLINDRICAL ANVIL Hammer Faces Face 1 Face 2 (None) Cross Peen Dog Head Combination Twist Face Handle Direction Anvil Shapes of Saw Dial Indicators Model "A" Model "B" Model "C" Page 19 Tools Accessories
d -2,5 26,5 mm D -3,4 33 mm L mm; МК D mm L mm D mm L mm
KAMAZ Publicly Traded Company Repair and Tooling Plant Tool making 2018 Twist drills Auger drills Drills with a thickened core Centre drills Twist step drills Solid carbide drills Inserted-blade drills
max. 1, Ø Plate Kerf Bore Z Hook Ground
11 Multi-rip Saw Blade With Raker 0 0 Ø Plate Kerf Bore Z Z Hook Ground Excellent blade with special rakers for ripping cuts in solid wood, dry or wet. The carbide rakers protect the saw body to guarantee
Forged Chains & Sprockets
Forged Chains & Sprockets Forged Link Standard Series MN Grade Standard in stock MINIMUM ULTIMATE STRENGTH LB CHAIN No. PITCH T C S F R OD MN CN C CD S 420 JKF102Z 4 (102) 0.94 1.42 0.31 0.39 0.25 0.56
SAWBLADES SPINDLE TOOLING
EICATE WEBSITE Trend have created a website for our range of industrial tooling especially for the manufacturing industry. This website offers full product details on our Sawblades, Spindle Tooling, rilling
ISO/IEC ACCREDITED CALIBRATION LABORATORY
My history with Indicator Calibrators Cornerstone Metrology Service Inc. was established in 1983 and our first indicator calibrator was made by Federal. It has a 0-1 standard mic head with a approx. 4
Agricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
Forged Chains & Sprockets
Forged Chains & Sprockets Telephone: 309-698-9250 5 a CROMANT chain company FORGED CHAINS & SPROCKETS Cobalt Chains forged alloy fork link chain provides an excellent solution for the rigors of heavy duty
THE PRODUCTION COMPARATOR STAND
845-454-3111 800-549-4243 THE PRODUCTION COMPARATOR STAND The Dorsey E1 comparator stand is specially designed for use in production and shop areas. The comparator stand has a large base and 3" throat
POWER TRANSMISSION PARTS. Spare parts in-stock when you need them. Metric Timing Pulleys & Belt Drives.
POWER TRNSMISSION PRTS Spare parts in-stock when you need them Metric Timing Pulleys & elt Drives Metric T & T Pulley & elt Drives The metric T & T series was created to meet industries need for polyurethane
LIGHTWEIGHT ADJUSTABLE SHALLOW DIAMETER GAGES
SERIES 77 For use at machine or inspection area for checking inside and outside diameters, shallow bores, counter bores, pitch diameters of gears, and many other dimensions. LIGHTWEIGHT ADJUSTABLE SHALLOW
ORDERING PROCEDURE. Contact your regional Rottler sales rep for assistance in ordering optional equipment, replacement parts, or tooling.
8029 S 200th St, Kent, WA 98032 USA Ph: 253-872-7050 Fax: 253-395-0230 03.01.2019 ORDERING PROCEDURE Contact your regional Rottler sales rep for assistance in ordering optional equipment, replacement
Mustang Differential Gears - Installation Instructions
Mustang Differential Gears - Installation Instructions The below installation instructions work for the following products: Ford Racing Gears - 3.73 Gears for 8.8" Ford Rear End Ford Racing Gears - FRPP
Broach Sets. No. 00 Precision Set. Collared bushings only. No. 10 Standard Set. Collared bushings only. No. 10A Standard Set. Collared bushings only
es Sets All Minute Man Sets are furnished in handsome varnished wood boxes, and come complete with precision broaches, slotted bushings, and necessary shims Collared bushings are recommended for the broach
FOR MORE INFORMATION CALL CLARK ROLLER CHAIN SPROCKETS INDEX...E-1 - E-2 MADE-TO-ORDER CAPABILITIES...
Index SECTION E ROLLER CHAIN PRODUCT PAGE INDEX...E- - E-2 MADE-TO-ORDER CAPABILITIES...E- SECTION I STANDARD...E-4 - E-2 Shear Pin Sprockets, Bolt-On...E-4 - E-6 Type D Sprockets, Detachable s Split and
SAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
HAYES ORIGINAL FLYWHEEL COUPLINGS
HAYES ORIGINAL FLYWHEEL COUPLINGS Original Flywheel Couplings There are thousands of Hayes Original Flywheel Couplings in service throughout the world. They are used in gas and tough diesel engine applications
THE CUTTING EDGE 8029 S
THE CUTTING EDGE 8029 S 200th St, Kent, WA 98032 USA Ph: 253-872-7050 Fax: 253-395-0230 9.08.2016 ORDERING PROCEDURE Contact your regional Rottler sales rep for assistance in ordering optional equipment,
LIFT TRUCK SERIES: G35S-2 G40S-2 G45S-2 G40SC-2 G45SC-2 G50SC-2. November 15, 2000 CODE 3150 LT3150-L0 SUBJECT: NEW DRIVE AXLE
LIFT TRUCK SERIES: G35S-2 G40S-2 G45S-2 G40SC-2 G45SC-2 G50SC-2 November 15, 2000 CODE 3150 LT3150-L0 SUBJECT: NEW DRIVE AXLE A new drive axle has been introduced in the above model lift trucks. The purpose
ORDERING PROCEDURE. Contact your regional Rottler sales rep for assistance in ordering optional equipment, replacement parts, or tooling.
8029 S 200th St, Kent, WA 98032 USA Ph: 253-872-7050 Fax: 253-395-0230 17.02.2017 ORDERING PROCEDURE Contact your regional Rottler sales rep for assistance in ordering optional equipment, replacement
ROLLER CHAIN SPROCKETS INDEX...E-1 E-2 MADE-TO-ORDER CAPABILITIES...E-3
Index SECTION E ROLLER CHAIN SPROCKETS PRODUCT PAGE INDEX...E-1 E-2 MADE-TO-ORDER CAPABILITIES...E-3 SECTION I STANDARD SPROCKETS...E-4 E-112 Shear Pin Sprockets, Bolt-On...E-4 E-6 Type D Sprockets, Detachable
COMPETENCE IN PRECISION AND QUALITY HOLE SAWS
COMPETENCE IN PRECISION AND QUALITY HOLE SAWS Tungsten carbide hole saws, shallow cut Cutting edges: tungsten carbide Material thickness: up to 4 Cutting depth: up to max. 10 Cutting angle: works standard
WILTON SAWING. Horizontal Bandsaw s Vertical Bandsaws Cold Saws Cold Saw Blades Accessories... 32
Horizontal Bandsaw s........................... 18 Vertical Bandsaws.............................. 24 Cold Saws.................................... 27 Cold Saw Blades............................... 31
RW 1200 ROCK WINDROWER. Table of Contents
RITE WAY MFG. CO. LTD. P.O. Box 328 Imperial, Saskatchewan Canada, S0G 2J0 Ph: (306) 963-2180 Fax: (306) 963-2660 Web Site: www.ritewaymfg.com E-mail: info@ritewaymfg.com RW 1200 ROCK WINDROWER Table of
Section X STEERING DATA AND SPECIFICATIONS. 21 degrees 45 minutes -f- or 1 degree (inner wheel when outer wheel is 20 degrees)
76 Section X DATA AND SPECIFICATIONS MODELS MC-1 MG-2 MC-3 MY-1 Steering Type Manual Power Worm and Three Tooth Roller None None None Rack and Gear Sector, Recirculating Ball Nut Ratio Manual 20.4... Power
SUZUKI SQ 416/420/625 M.Y TRANSMISSION SERVICE MANUAL - MANUAL - AUTOMATIC - TRANSFER - DIFFERENTIALS
SUZUKI SQ 416/420/625 M.Y 1998-2005 TRANSMISSION SERVICE MANUAL - MANUAL - AUTOMATIC - TRANSFER - DIFFERENTIALS WARNING/CAUTION/NOTE IMPORTANT Please read this manual and follow its instructions carefully.
HTD Pulley & Belt Drives
HTD Pulley & elt Drives HTD timing belts offer optimised load distribution through the rounded tooth form, guaranteeing high power transmission in low speed and high torque applications. apable of transmitting
RIDGID Wrenches 1.1. Page. Wrench Type
RIDGID Wrenches Time-tested designs. Often imitated, never duplicated. Efficient designs to improve productivity. Innovative to provide new solutions to old problems. Wrench Type of Nom. s Size (in.) (in.)
PNEUMATIC CUTTING TOOL FOR STEEL BAND PNEUMATIC PUNCH TOOL TABLE TOP SHEARS TABLE TOP SHEARS HAND HELD SET GAUGE TABLE TOP SET GAUGE/PRINTER FOR
ACCESSORIES ALO TA10/12/13 ALO H7 ALO 15/18/20/21 ALO 22-01 ALO 81-60/83-60 ALO 81-57/81-58 ALO 81-80 ALO 174-DCT ALO 181/183 VISION ALO 185-011/012 ALO 820/822 ALO 825/826 ALO 831 ALO 863-HD ALO 880 ALO
UOW Series Repair Manual UOW-11 & UOW-T60 Series
UOW Series Repair Manual UOW-11 & UOW-T60 Series 100000 SE Pine St., Portland, OR 97216 800-852-1368 503-254-6600 www.aimco-global.com Contents Page 1. Tools Needed for Repair 2 2. Disassembly and Reassembly
About Grind-All Supply Ltd.
About Grind-All Supply Ltd. Grind-All Supply Ltd. - Supplying you with top quality carbide burs, diamond-coated burs, air tools, parts, and accessories. Grind-All Supply Ltd. has been providing quality
MarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments
+ MarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments Indicator Stands MarStand 815 GN With Cast Iron Base MarStand 815 MA / 815 MB / 815MG / 815 P With Magnetic Base 8-2 8-3 Post
lkm7001 key override module Installation Instructions Converting The LKM7000 to The LKM7003
lkm7001 Instructions Converting The LKM7000 to The LKM7003 key override module In A Single Motion, We ll Change The Way You Think About Security Read Instructions thoroughly prior to installation Base
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS 2102 LOWERING SPINDLE ASSEMBLY 1998-UP CHEVROLET / GMC BLAZER / X-TREME / JIMMY / ENVOY 2 Wheel Drive Congratulations! You were selective enough to choose a BELLTECH PRODUCT.
MAIN PRICE LIST. - B 487 Perforated Strip 2 1/2" B 488 Perforated Strip 3 1/2" B 482 Perforated Strip 4 1/2" 9 1.
PERFORATED STRIPS LENGTH HOLES GBP 1 Perforated Strip 12 1/2" 25 1.63 1 a Perforated Strip 9 1/2" 19 1.51 1 b Perforated Strip 7 1/2" 15 1.39 2 Perforated Strip 5 1/2" 11 0.90 2 a Perforated Strip 4 1/2"
INSTALLATION INSTRUCTIONS CHEVROLET NOVA (NVR-301) INDEPENDENT REAR SUSPENSION
INSTALLATION INSTRUCTIONS 68-74 CHEVROLET NOVA (NVR-301) INDEPENDENT REAR SUSPENSION Please read these instructions completely before starting your installation. Assemble suspension on vehicle before powder-coating
Online version - not for reprint
4. CLUTCH, CHAIN DRIVE, CHAIN BRAKE, CHAIN TENSIONER 4. Clutch Drum/Chain Sprocket 43RA007 VA 70RA005 VA - Remove the chain sprocket cover. Disengage the chain brake by pulling the hand guard toward the
Maintenance Information
Form 04584058 Edition 1 November 2004 Air Impactool 2141P and 2141PSP Maintenance Information Save These Instructions Disassembly General Instructions 1. Do not disassemble the tool any further than necessary
McGill CAMROL Bearings
McGill CAMROL Bearings Overview Features & Benefits Competition Product Selection Markets & Applications Summary Key Contacts 2 Product Overview Invented by McGill in 1937 Replaced designs using bolt &
Page FHC350D Drive Motor 2/3 Hp (1.4/2.2kw) Angles (left & right) 45 Electric
www.clausing-industrial.com A Line of Affordable, Rugged Built, Ferrous and Non-Ferrous Cutting Production Circular Saws Manual Cutting Machines Pneumatic Vise Cutting Machines Semi-Automatic Cutting Machines
POWER RAKE PARTS CATALOG MODEL 1305PR SERIAL NUMBER AND ABOVE
POWER RAKE PARTS CATALOG MODEL 0PR SERIAL NUMBER 000 AND ABOVE Turf Teq LLC PC0PR--0--0 Contents Part Number Page Number 0--0... Sector A... 0--0... Engine A... 0--0... Hydro Handle A... 0--0... K Transmission
1995 Mercury Grand Marquis GS
AIR BAG SYSTEM CAUTION: Read the following safety precautions BEFORE servicing steering columns on vehicles equipped with air bag restraint system. ALWAYS wear safety glasses when servicing vehicle with
PRODUCT CATALOGUE. Distributor: BODDINGTONS ELECTRICAL PRODUCT CATALOGUE EDITION 3
BODDINGTONS ELECTRICAL PRODUCT CATALOGUE EDITION 3 PRODUCT CATALOGUE w w w. b o d d i n g t o n s - e l e c t r i c a l. c o m Distributor: Prospect House, Queenborough Lane Great Notley, Braintree, CM77
The HMC-Lite Construction Guide
The HMC-Lite Construction Guide The Heavy Metal-Lite Chassis is constructed using two identical drive modules. The drive modules are constructed using 3 mechanical sub-assemblies. The drive modules are
INSTALLATION INSTRUCTIONS FOR DSP9600/9100 WHEEL BALANCER
Form 5063T, 06-05 Supersedes Form 5063T, 02-04 INSTALLATION INSTRUCTIONS FOR DSP9600/9100 WHEEL BALANCER This document provides the information needed to install the DSP9600/9100 Wheel Balancer. NOTE:
ROLLER CHAIN SPROCKETS INDEX...E-1 - E-2 MADE-TO-ORDER CAPABILITIES...E-3
Index SECTION E ROLLER CHAIN PRODUCT PAGE INDEX...E- - E-2 MADE-TO-ORDER CAPABILITIES...E- SECTION I STANDARD...E-4 - E-2 Shear Pin Sprockets, Bolt-On...E-4 - E-6 Type D Sprockets, Detachable Hubs Split
STERNDRIVE UNIT 3 B GEAR HOUSINGS MR/ALPHA ONE/ALPHA ONE SS
STERNDRIVE UNIT 3 B 23146 GEAR HOUSINGS MR/ALPHA ONE/ALPHA ONE SS Table of Contents Page Identification........................... 3B-1 Specifications.......................... 3B-1 Torque Specifications................
Martin Series 800 Conveyor Sprockets
800 Series Martin Series 800 Manufactured From High Quality Semi-Steel THE NEW QRS SPLIT 815 Solid Face with Guide Ring Holes for Straight Running Chains 820 Grooved Face for Straight Running Chain PAT.
SISU DP-330 DRIVE GEAR. Maintenance Manual
SISU DP-330 DRIVE GEAR Maintenance Manual Sisu Axles, Inc. Autotehtaantie 1 PO Box 189 Fin-13101 Hameenlinna Finland Phone +358 204 55 2999 Fax +358 204 55 2900 DP330DG.PDF (3/2007) TABLE OF CONTENTS
10.5 gal. Vertical Oil Lubricated Air Compressor
10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable
60-65 Falcon, Comet & Ranchero Coil Spring IFS
60-65 Falcon, 62-65 Comet & 62-65 Ranchero Coil Spring IFS All engine installations with this front end will require a rear sump oil pan. 289-302 Small Block Ford Motors Milodon rear sump pan holds 7 quarts
Diamond Chain Repair Manual For. Pneumatic Concrete Chain Saws
Diamond Manual For Pneumatic Concrete Chain Saws CS UNITEC, Inc. Terms A. Connecting link. B. Diamond segment with bumper drive link. C. Preset connecting link with rivets. Chain Breaker Description Part
YOU MUST WEAR SAFETY GLASSES DURING EACH STEP OF THESE INSTRUCTIONS
Machine Racer: Rally Preparation 1. Print the Working Drawing of the design you created and simulated in the Mousetrap Car 2.0 STEM Application. You can find your Working Drawing in the "Outputs" tab of
ASSEMBLY INSTRUCTIONS FOR CHARGER AND THE BOSS QUICK ATTACH GRASS BAGGER
ASSEMBLY INSTRUCTIONS FOR CHARGER AND THE BOSS QUICK ATTACH GRASS BAGGER \ \ \ \ ~\ P P-12102 (7/2005) TABLE OF CONTENTS SECTION PAGE WARNING 1 BLOWER PULLEY INSTALLATION 2 ENGINE GUARD REMOVAL BOSS 3
HKS 700E. Service Manual June Ver. 2.04
HKS 700E Service Manual 009 June Ver..04 HKS CO.,LTD 78 KITAYAMA FUJINOMIYA SHIZUOKA JAPAN 48-09 TEL +8(0)544-54-78 FAX +8(0)544-54-40 hks_aviation@hks-power.co.jp http://www.hks-power.co.jp/hks_aviation/
dial Bore gauge set deck Bridges 6'' stainless steel Calipers rocker stud remover 6'' digital Calipers top dead Center stop
415 dial Bore gauge set Used for checking cylinder bores, but is also useful for checking connecting rod bores for size, straightness or taper. Accurate to.0005. 15052 Dial Bore Gauge Set deck Bridges
Gates Poly Chain GT 2 Sprocket Specifications
Gates Poly Chain GT 2 Specifications 2D and 3D Drawings are available at www.gates.com/designview 64 Gates Corporation www.gates.com/pt Stock 8mm Gates Poly Chain GT 2 Specifications of Teeth Pitch O.D.
Instruction Manual for PTI Split Block Bearing Units For SAF, SDAF, SN, SNG, SNHF, S3000K & SD Series Housings
Instruction Manual for PTI Split Block Bearing Units For SAF, SDAF, SN, SNG, SNHF, S3000K & SD Series Housings Installation SDAF SD & S3000 SAF Warning: To ensure that the drive is not unexpectedly started,
Gauge Blocks - Reference for Precision
ß Measuring and Laying-Out Tools, Testing Instruments Gauge Blocks - Reference for Precision Parallel gauge blocks in compliance with DIN EN ISO 650 are supplied in the following calibration and tolerance
280 Heavy Duty Cartridge Dual Seal
MECHNICL SEL INSTLLTION INSTRUCTIONS 80 Heavy Duty Cartridge Dual Seal SEL INSTLLTION Preparation Determine if the pump is in good condition.. Check the shaft or sleeve. 1. Remove all burrs and sharp corners,
Track Rollers/ Cam Followers
Track Rollers/ Cam Followers Page Nomenclature...................................... 460 Introduction....................................... 462 Identification....................................... 462
Sawing. Leitz Lexicon Edition 7
Sawing Leitz Lexicon Edition 7 Explanation of abbreviations A a e a p ABM APL APT AL AM AS b B BDD BEM BEZ BH BO CNC = dimension A = cutting thickness (radial) = cutting depth (axial) = dimension = panel
COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS
COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS FLEXIBLE COUPLINGS HRC TYPE Hercus HRC Couplings are designed for general-purpose applications
Installation and Parts Replacement Manual For No. 188D BIO-DISC Reducer
Installation and Parts Replacement Manual For No. 88D BIO-DISC Reducer These instructions must be read thoroughly before installation or operation. This instruction manual was accurate at the time of printing.
BEARINGS. Engineered Bearings for Your Applications
SM BEARINGS Engineered Bearings for Your Applications Engineering and Manufacturing Anti-Friction Bearings Since 1908 Rollway Bearing Division of Emerson Power Transmission, originally known as the Railway
PANEL SIZING SAW BLADES Tungsten Carbide & Diamond
PANEL SIZING SAW BLADES Tungsten Carbide & Diamond LEUCO U-Cut (HW) LEUCO Q-Cut (HW) LEUCO DIA LEUCO DIA topcoat www.leuco.com U-CUT FAMILY, TUNGSTEN-CARBIDE-TIPPED U-CUT: UNIVERSAL-CUT UNIVERSAL CUTS
TORQUE LIMITERS 211CDW 221CDW 231CDW 241CDW. Ball Detent Style THE ULTIMATE PROTECTION CARLSON-DIMOND & WRIGHT, INC.
TORQUE LIMITERS Ball Detent Style 211CDW 221CDW 231CDW 241CDW THE ULTIMATE PROTECTION CARLSON-DIMOND & WRIGHT, INC. CDWdrives Torque Limiters Protect your equipment from costly downtime! 1 2 3 4 7 5 Features
Parts Catalog. S-Series Slicer Standard Automatic S13A. Model:
, 08 99508 ECN 0 Parts Catalog S-Series Slicer Standard Automatic Model: SA SA 0/5/8/08 Rev. Y IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
CONTENT. 1. Syllabus 2. Introduction 3. Shaft 4. Coupling. Rigid coupling. Flange coupling. Sleeve (or) muff coupling Split muff coupling
UNIT II 1. Syllabus 2. Introduction 3. Shaft 4. Coupling Rigid coupling CONTENT Flange coupling Protected flange coupling Unprotected flange coupling Marine type flange coupling Sleeve (or) muff coupling
Micrometer Torque Wrenches Beam Torque Wrenches Electronic Torque Wrenches
Micrometer Torque Wrenches... 315 Beam Torque Wrenches... 317 Electronic Torque Wrenches... 317 6 T O R Q U E W R E N C H E S 313 Torque Wrenches GearWrench torque wrenches offer the latest innovations
TRANSMISSIONS MANUAL
DMR-5023 Stick shift pilot bearing. Knurled for sure fit, self aligning for perfect fit and smooth running and shift. Fits ant GM manual stick transmission crank. Allows GM transmission in Ford cars. DMR-5022
MicroSpan. Chain. Chain. revised SpanTech LLC
Chain MicroSpan Chain 1 27 SpanTech LLC Contents Overview... 3 MicroSpan Chain Types... 3 The Nose Bar... 6 Chain Fabrication... 8 Chain Widths... 8 MicroSpan Sprockets... 9 Standard Split Sprocket...
Trick-Tools 75 Truman Road Pella, IA Phone:1-877-VAN-SANT
Distributed by: Trick-Tools 75 Truman Road Pella, IA 50219 Phone:1-877-VAN-SANT E-mail: sales@trick-tools.com Here at Trick Tools we believe that our customers deserve the best value in their tool and
TIMING CHAINS & BELTS
TIMING CHAINS & BELTS * PLEASE READ THIS FIRST * TIMING CHAINS Timing chains will stretch during operation. Limits are placed upon amount of stretch before replacement is required. Timing chain stretch
Performance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
Gear Engineering Data. Spur Gear Gear Formulas Drive Selection Horsepower and Torque Tables
Engineering Gear Engineering Data Spur Gear Gear Formulas Drive Selection Horsepower and Torque Tables G-79 Gear Selection Stock Spur Gear Drive Selection When designing a stock gear drive using the horsepower
Illustrated Parts & Packing List 815 Rice Lake Street, Owatonna, MN For a complete distributor & dealer list go to
Illustrated Parts & Packing List 815 Rice Lake Street, Owatonna, MN 55060 For a complete distributor & dealer list go to www.gandy.net 62BN24C Orbit-Air Applicator 21.9 Cu. Ft. (.62m 3 ), 1000-Lb Capacity,
Parts Catalog. S-Series Slicer Standard Automatic Frozen Option S13A. Model:
, 08 995 ECN 0 Parts Catalog S3A S-Series Slicer Standard Automatic Frozen Option Model: S3A 0/09/08 Rev. W IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL
AJV8 Engine Assembly. AJV8 Engine Assembly
AJV8 Engine Assembly Contents Cylinder Block Dowels, Plugs and Pipes 2 4 Crankshaft Bearing and Cylinder Bore Dimensions 5 9 Bearing Measuring 6 Engine Dimensions and Codes 6 7 Main Bearing Selection Chart
lbs sq. Camshaft bush ID 0.5 ± Clearance bush to camshaft ±
GENERAL Cubic capacity 347 C.C. Stroke 93 mm. / 3.6614 Cylinder bore Compression ratio Max compression at kick starter speed 2 23 /32 = 2.7187 ± 0.0005 (Re-bore to + 0.02 when wear exceeds 0.008 ). Note:
Take off case cover.
33 14 520 Replacing complete locking differential (Type M) - final drive removed - Removing and installing final drive, included in Repair Manual MF, model-dependent, from '85, refer to 33 10 010. Drain
Parts Catalog. S-Series Slicer Automatic. Model:
, 07 99509 ECN 077 Parts Catalog S-Series Slicer Automatic Model: SGA SGA 05/08/07 Rev. J IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE
Keyseat 180 from split. Available Sure-Grip Bushings (Millimeter Bores-Inch Bolt) F J M N P SKL SFL EL QT JA SH SDS SD SK SF E
B u s h i n g s Sure-Grip * Quick Detachable bushings are easy to install and remove. They are split through flange and taper to provide a true clamp on the shaft that is the equivalent of a shrink fit.
MECHANICAL OVERLOAD CLUTCHES SECTION CONTENTS
TRIG-O-MATIC LITE MECHANICAL OVERLOAD CLUTCHES LOR SERIES SECTION CONTENTS FEATURES...8 OPERATING PRINCIPLES...8 SELECTION...9 HOW TO ORDER...9 RATINGS AND DIMENSIONS...10 MOUNTING ARRANGEMENTS...11 BUSHING
Illustrated Parts & Packing List 815 Rice Lake Street, Owatonna, MN For a complete distributor & dealer list go to
Illustrated Parts & Packing List 815 Rice Lake Street, Owatonna, MN 55060 For a complete distributor & dealer list go to www.gandy.net 62DS12F Orbit-Air Applicator 10 CU. FT. (.28m 3 ) Hopper, 450-Lb Chemical
Lycoming AIRCRAFT ENGINES. IO-540-AC1A5 Wide Series Flange Crankcase Model Engine PARTS CATALOG PC
AIRCRAFT ENGINES IO-540-ACA5 Wide Series Flange Crankcase Model Engine PARTS CATALOG PC-5- November 008 Lycoming 5 Oliver Street Williamsport, PA 770 U.S.A. 570/33-8 IO-540-ACA5 PARTS CATALOG This illustrated
Sawing. Leitz Lexicon Edition 7
Sawing Leitz Lexicon Edition 7 Explanation of abbreviations A a e a p ABM APL APT AL AM AS b B BDD BEM BEZ BH BO CNC = dimension A = cutting thickness (radial) = cutting depth (axial) = dimension = panel
Illustrated Parts & Packing List & Instructions 815 Rice Lake Street, Owatonna, MN 55060
Illustrated Parts & Packing List & Instructions 815 Rice Lake Street, Owatonna, MN 55060 Great Plains Part #891-561C (Gandy Part #6245DS-GP) For Great Plains Turbo-Max 2400, 3000, 3500 & 4000 Models 45
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory USB ADAPTER Application 2014 INSIGHT Publications No. AII 50655 Issue Date OCT 2013 PARTS LIST USB Adapter Attachment Kit P/N 08B28-TM8-100A 6 mm Flange nut Control
Parts Catalog. S-Series Slicer Standard Automatic Frozen Option S13A. Model:
, 07 995 ECN 077 Parts Catalog SA S-Series Slicer Standard Automatic Frozen Option Model: SA 05/08/07 Rev. H IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL
HAND & POWER TOOLS ALSO AVAILABLE FROM
HAND & POWER TOOLS ALSO AVAILABLE FROM Page 56 www.jobsitesupply.com (317) 684-7474 624 S. Missouri St. - Indianapolis, IN 46225 * Maximum initial battery pack voltage (measured without a workload) is
4410 TwinHydrostatic Gas Seal
IS0 9001 CERTIFIED CHESTERTON FLUID SEALING DIVISION INSTALLATION INSTRUCTIONS 4410 TwinHydrostatic Gas Seal SEAL INSTALLATION Preparation Determine if the pump is in good condition. A. Check the shaft
10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
Stock QD Bushings. DISMOUNTING 1. Remove pull-up bolts and screw them into TAPPED holes in sheave or sprocket and against flange of QD bushing to
Stock Q s MOUNTING ROCEURE Q USHINGS IMORTANT E SURE TAERE CONE SURFACES OF Q USHING AN INSIE OF SHEAVE OR SROCKET HU ARE RY AN FREE OF ALL FOREIGN SUSTANCES SUCH AS AINT, GREASE, OR IRT. STANAR MOUNTING
PLP Compression Dead-end & Jumper Terminal for ACSR & ACSS Conductors
MARCH 2017 PLP Compression Dead-end & Jumper Terminal for ACSR & ACSS Conductors Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED
TIMKEN SNT SPLIT PLUMMER BLOCKS
TIMKEN SNT SPLIT PLUMMER BLOCKS TIMKEN SNT SPLIT PLUMMER BLOCKS 1 TABLE OF CONTENTS INTRODUCTION... 3 TIMKEN SNT SPLIT PLUMMER BLOCKS...4 SEAL OPTIONS AND DESCRIPTIONS...6 SEAL SELECTION AND CONFIGURATION
TIRE SERVICE TIRE GAUGES TIRE SERVICE INFLATORS. Inflators - Gauges. Milton Industries Low Pressure Tire Gauge MIL S917
INFLATORS The gauge reads tire pressure between 2 and 150 PSI with 0.5 PSI resolution. It features a large LDC display with a 30 cm hose. It works on TPMS equipped wheels. It is factory set for PSI, kg/cm2,
DAKE / JOHNSON VERTICAL BAND SAW
DAKE / JOHNSON VERTICAL BAND SAW Model F - 6 INSTRUCTION MANUAL MODEL:F-6 SERIAL NUMBER: DATE PURCHASED: Need band saw blades? Call Dake DAKE (Division of JSJ) 724 Robbins Road Grand Haven, Michigan 4947
Service Manual. Fuller Mechanical Transmissions TRSM0992 October 2007
Service Manual Fuller Mechanical Transmissions TRSM0992 October 2007 Introduction Warnings and Precautions Before starting a vehicle always be seated in the driver s seat, place the transmission in neutral,
Height Master Page 345. Check Master Page 349. Calibration Tools Page 354
Calibration Instruments Height Master Page 345 Check Master Page 349 Calibration Tools Page 354 344 Digital Height Master Functions ZERO/ABS DATA/HOLD Auto Power OFF after 20 min. non use Low voltage alarm
The HMC Heavy Metal Chassis Construction Guide using Timing Pulleys and Belts
The HMC Heavy Metal Chassis Construction Guide using Timing Pulleys and Belts The Heavy Metal Chassis is constructed using two identical drive modules. Power can be transmitted from the motors to the wheels