3 POINT LOCKS. Swing Handles D4SPL. With Pad Lock. D4C5 With Insert
|
|
- Douglas Stafford
- 5 years ago
- Views:
Transcription
1 S Round Rod System Swing Handles D4SP With Plug D4SSLG With Shutter D4SPL With Pad Lock D4SML Die Cast Handle (For Laser Marking, Refer pg. no. B-39) D4SHL With Shroud D4S-CY1 With Profile Cylinder D4SH-CY2 Profile Cylinder With Insert D4C5 With Insert D4SL With Key D-1333 D4SLG With Acrylic Branding Plate Standard Key Lock Key-D-1333 For Combination Lock Number will be Marked on the Barrel & Key for D3S-CY1 Refer pg. no. B-11 Add SS for Shutter SS Version to be ordered separately Applicable for Key D-1333 Series CY 1 CY 2 Push to Lock Standard L : 50 mm Available : 35, 75, 100, 110, 120 mm Cut Out Basic Model-D4S Feature With Plug With Shutter With Pad Lock Die Cast Handle With Shroud With Profile Cylinder Profile Cylinder With Insert With Insert With Key D-1333 With Acrylic Branding Plate Add. SP SS PL ML SH CY1 CY2 C5 L LG C-33
2 S 3 Point Lock System With Round Rods D4SQBH Refer pg. no. C-48 to 50 Refer pg. no. C-52 Refer pg. no. C-51 Refer pg. no. C-33 Refer Cam Page C-32, 51 & Cut Out Page C-33 C-34
3 QBH Set Consists of Rod : D4F-1065 Rod Guide : D3RGR Adaptor : DRAS 2 Nos. 3 POINT 3 Point Lock Systems DML1-QBC D4SHL-QBC-LG D1QBC D11QBC D4SL-L-QBC D2QBH DMT7-QBC DMTM7-CH-QBC C-35
4 3 Point Lock System D4SL-CA1-MR18-L60 DML2-L-QBC D4C5-QBC DML3-L-CH-LC8L45 DML2-L-QBH D14SL-QBC-St DML1M-CH-QBC DM6L1M-QBC-CR-CH C-36
5 D15SCY1-SH-SS-CA3-SR Key-D-1333 Swing Lock Stainless Steel-304 Shroud Refer pg. no. C-30, 32, C-48 to C-52 for Details D18 Key-D-1333 Swing Lock Polyamide Suitable for Profile Cylinder D18SL-QBC D18SL-SS-QBC With Shutter Key not removed in unlock condition : D18CSL-QBC C-37 Refer pg. no. C-32, C-48 to C-52 for Details D18CSL-SS-QBC With Shutter
6 DML6-5-QBC-CR-S POINT Pad Lock L Handle Die Cast DML6 Key-D-1333 DML6-K-S-1072-PC-MR Inserts available Refer pg. no. B-13 Insert & turn the key then Pull trigger to swing the Handle. Available in Left & Right Version. Refer pg. no. C-48 to C-52 for Details C-38
7 D9 Key-D-1333 Locking System Die Cast Cut Out D9SL-QBC Lock D9S-QBC Unlock Refer pg. no. C-48 to C-52 for Details D14 QBC Grip 51.5 mm MR Grip 35 mm Key-D-1333 Push to Lock Diecast D14SL-QBC C-39 Refer pg. no. C-48 to C-52 for Details D14SL-MR
8 Adjustable Grip Handle : Polyamide Base : Die Cast DML4 Key-D-2233 DML4S-L-CR D3RGA DML4S-L-QBC Cut Out for right opening. Cut Out for left opening. Rod Guide D3RGA Refer pg. no. C-48 to C-52 for Details C-40
9 DM25-L-QBC Pad Lock Die Cast Refer pg. no. C-48 to C-52 for Details DM17-L-QBC Pad Lock Handle Die Cast DM17-L-QBC-R (Anti-Clockwise Version) Cut Out DM17-L-QBC-L (Clockwise Version) C-41 Refer pg. no. B-38 & C-48 to C-52
10 Swing Handle Die Cast DM27 Key-D-1333 Laser Marking available for CH finishing on minimum order Refer pg. no. B-39 DM27-K-S-10x75-QBC DM27-5-S-10x40-MR DM27-K-S-10x40-QBC Inserts available Refer pg. no. C-32, C-48 to C-52, B-13 C-42
11 Applcation DMLK6-CA1-MR16 DM6L1M-QBC-CR-CH C-43 Refer pg. no. C-32, C-48 to C-52 & B-09, B-29 to B-32 for Details T Handle version is also available
12 Swing Handle Polyamide D21 Key-D-1333 Cut Out D21SL-CA1-MR16 Refer pg. no. C-32, C-48 to C-52 for Details C-44
13 DMRPU Rack & Pinion Connector & Gears : Zinc Die Cast Body : Steel DMRPU-ZC DMRPU with Internal Die Cast Cam Connector End Standard Version with Grub Screw. 8 Ø Rod Refer pg no. C-42 to C-46 DMRPU-TH-ZC DMRPU-TH-MR Connector End Threaded Version - M8 Refer pg no. C-42 to C-46 Application View Assembly Exploded View C-45
14 Rack & Pinion DMRPU Key-D-1333 Application View DMRPU-MP Mild Steel Mounting Plate DMRPU-MR DMRPU with MR Cam Adaptor Assembly Assembly Exploded View C-46
15 2 POINT DZCRP 2 Way Slam Lock DMLB-L DZSRP-F DZSRP DZCRP C-47
16 ROUND RODS Round Rod Mild Steel D4FAR20-L Round Rod Mild Steel D4DR-L DRA Only adapters are also available for use with your own rods. Threaded Rods Available Refer pg. no. C-45 to C-46 Round Rod Mild Steel D4FR-L C-48
17 ROUND RODS D4FOR-L Round Rod Mild Steel D4FPR-L Round Rod Mild Steel D4F-L Std. L=1065 Round Rod Mild Steel DRAS Only adapters are also available for use with your own rods. C-49
18 ROUND RODS Round Rod Mild Steel D4FBR-L Round Rod Mild Steel D4BR-L DRA Only adapters are also available for use with your own rods. Threaded Rods Available Refer pg. no. C-45 to C-46 Round Rod Mild Steel D4-L DRAS DRA Only adapters are also available for use with your own rods. Threaded Rods Available Refer pg. no. C-45 to C-46 C-50
19 Cams MCL-CR-L QBC-CR ACSQ-36 ACS-36 LCCH-40 Cam Holder ACSQ-36 Specify Circlip OR Cotter Pin ACS-36 QBCCH-44 Cam Holder FC CAM LC CAM C-51 Model No. H C L T LC Cam FC Cam QBHC Cam QBC W QBHC QBC L=60 & Grip=16 is standard, other variations available on minimum order request.
20 Round Rod Guide Body : Polyamide Insert : Metal D3RGR24 Standard h eight 24 D3RGR Standard height 28 SP With spacer 3.2 mm. height can be increased Suffix SP Eg. D3RGR24-SP Rod Guide Polyamide D3RGA Snap Fit Cut Out For Application Refer pg. no. C-49 Die Cast Keys Keys to be Ordered Separately DB5K DBTK DBSQ7K DBSQ8K Keys can be Powder Coated Keys can be Customized Moulded Option Moulded Option for D-1333 Key Die Cast Handle Key Brass Key D-1333-M DB1333 D-1333 D-2233 For unique Keys Please Refer Pg. No. B-13 C-52
Pls find below list of Standard Machine Elements available at Perfect Corporation ROD HANDLES DAH20-S DHEX-E DHFS-E DHFL-E A-20
Dear Sir / Madam, Date: 14 March 2013 Pls find below list of Standard Machine Elements available at Perfect Corporation ROD HANDLES DAH20-S DHEX-E DHFS-E DHFL-E A-20 DAH20-150 DAH20-200 DAH20-250 DAH20-300
More informationSwing Handles & Latches
ov-swing-handles-&-paddle-latches-divider - Updated - 12-01-2017 w Swing Handles - Cam Control Swing Handles - Rod Control Flush T-handle Latches Paddle Latches Swing Handles & Latches 30 Swing Handles
More informationTHIS PAGE LEFT BLANK INTENTIONALLY
THIS PAGE LEFT LANK INTENTIONALLY ARREL EXCHANGE SYSTEM The housings shown on this page all share a common part: an innovative removable barrel. In seconds, and without the need for any special tools,
More informationDA/SR. Pneumatic Rotary Actuators FEATURES VALBIA ISO 9001 CERTIFIED
VALBIA ISO 9001 CERTIFIED FEATURES Twin Rack and Pinion Design Constant Torque Output Compact Design Balanced Internal Forces Robust Design For Long Life Extruded Aluminum Body Hard Coat Anodized Smooth
More informationNumber of PG holes. 1 x PG 9 (Ø 15.5) 12 x PG 13.5 (Ø 21) 1 x PG 9 (Ø 15.5) /300/400/ Rittal Catalogue 32/Industrial Enclosures
us enclosures G. us enclosures Enclosure:.38 Door:.5 IP 65 to EN 60 59/09.00, complies with NEMA. Door with l/h hinge, cam lock with double-bit insert, () support rail(s) S 35/7.5 (for G 586.). Drilled
More information2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
More informationPneumatic Rotary Actuators
ALEDER ISO 9001 CERTIFIED FEATURES Twin Rack and Pinion Design Constant Torque Output Compact Design Balanced Internal Forces Robust Design For Long Life Extruded Aluminum Body Hard Coat Anodized Smooth
More informationModularity and simplicity in action. ÂÂ Cost effective, easy to design and install
84 E5 Cam Latches Overview Modularity and simplicity in action The SOUTHCO E5 cam latch is a highly modular and easy to configure solution, suitable for a wide range of applications. By changing any of
More informationKeystone F89 pneumatic quarter-turn actuator General purpose / hazardous area
Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves
More informationKEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA
compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves
More informationCut Out Templates - Drop T & Compression Locks T1, T2, T3, V1, W1 C L LOCKS
111 112 Cut Out Templates - Drop T & Compression Locks T1, T2, T3, V1, W1 C L C L C L C L C L C L C L C L C L 113 C L PRODUCT NUMBER T1 T2 T3 V1 W1 EWTC140, EWTP140 WTC140, WTP140 UES052047 X UES052048
More informationQuarter-turn locks, compression latches
Quarter-turn locks, compression latches 435 K0518 Quarter-turn locks small version 2,5 13,5 4,5 SW 20 Ø20 max. 5 Ø16,2 14,2 Housing and actuator die-cast zinc. Housing and actuator chrome-plated. Wing-handle
More informationModularity and simplicity in action. A variety of materials and finishes to complement your application. Die-cast zinc latch bodies standard finishes:
116 E5 Cam Latches Overview Modularity and simplicity in action The SOUTHCO E5 cam latch is a highly modular and easy to configure solution, suitable for a wide range of applications. By changing any of
More informationbrochure PN
brochure PN-2013-01 www.bitorq.com/pneumatic.html Pneumatic Actuators PAGES 4-11 ON THE WEB AT BITORQ.COM/PNEUMATIC_PN.HTML COMPACT, RELIABLE DESIGN OPEN-CLOSED ADJUSTMENT STOPS DOUBLE ACTING AND SPRING
More informationSOARSEIKI.Co.,Ltd
SOARSEIKI.Co.,Ltd info@soarseiki.com 1 2 3 4 BAGS A1 FRONT AND REAR DIFF 5 BAGS A2 CENTER DIFF 5 BAGS B1 FRONT TRANSMISSION STEP B1-1 Apply a thiin layer of lubricant on the gear. GR160003 BE050110040
More informationAC-20 Multi Point Actuator
29.6 (1.17) 51.1 (2.01) 29.6 (1.17) 51.1 (2.01) Cable B 52 27.3 (2.05) (.68) 27.3 (.68) 4X Ø 5.2 ± 0.1 (.210 ±.005) Cable A 29.6 (1.17) 17.3 (.68) 80.9 (3.19) 119 (4.7) (1.17) AC-20 Multi Point Actuator
More informationLift & turn series Flush style Adjustable grip. Door thickness Maximum 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06)
96 62 Compression Latch Lift & turn series Flush style Adjustable grip Low profile Easy grip adjustment Zinc alloy, powder coated or chrome plated and steel, zinc plated Maximum static load: 220N (50 lbf)
More informationDoor thickness Max. 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06) Frame for top latching. R 0.5 (.02) Max. 8.6 (.34)
64 62 Compression Latch Small Lift & turn series Flush style Adjustable grip Low profile when latched Zinc alloy, powder coated or chrome plated and steel, zinc plated Max. static load: 220N (50 lbf) Compression
More informationUT Series. Pneumatic Actuators. UT-**-DA Series UT-**-SR Series. A full range of double acting and spring return actuators designed
UT-**-DA Series UT-**-SR Series A full range of double acting and spring return actuators designed to NAMUR for air supply ports and top mounting with ISO 5211 for base mounting patterns. Features Dual
More informationCut out PRODUCT CODE HANDLE BODY FINISH MATERIAL MODUL. 5 mm Double bit 8 mm Square 9 mm Triangular Button. Stainless steel dust cap (Keyed alike) 03
ROD-LATCH SYSTEM LINEAR HANDLE LOCK 204 V : 1 With mechanism Cut out Ergonomic and modern design Locking and unlocking by linear movement Suitable for inside & outside gasketing applications Swing handle
More informationApplications - Levelling of machine bases or constructions - Boards, partitions, enclosures - Tables, conveyors and work benches
FEET PA 00.0 076/ 0 - PA, grey - Anti-skid insert NBR - All bolts are suitable for all plates Applications - Levelling of machine bases or constructions - Boards, partitions, enclosures - Tables, conveyors
More informationCLARK SOLUTIONS 8P Series Pneumatic Actuated Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations
CLARK SOLUTIONS 8P Series Pneumatic Actuated Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations www.clarksol.com SERIES 8P0O80/82/135/136 SERIES 8P0129/131(T,L) 80: Direct mount
More informationB2082. Swing Handles - with Rod Control 40mm euro cylinder lock - dust cover - zinc or polyamide. wixroyd.com
40mm euro cylinder lock - dust cover - zinc or polyamide B2082 Type One: Body & Handle: die cast zinc, black Type Two: Body: Polyamide PA6, black. Handle: die cast zinc, black Order No. Type Body Handle
More informationLH: 21.1 GROUP CODE MATERIAL. Plastic. Keyed alike. 01 For cams please check page: Keyed differ Stainless steel dust cap (Keyed alike)
107 KNOB - ON LOCK 261 L: 21.1 27 Clip fixing for easy assembly. Mounting nut not required. Special 20mm x 26mm cut out. There is no IP 65 version of this lock. 1.8mm maximum panel thickness. Clips to
More informationCYLINDER HEAD CONTINUED ON NEXT FRAME. Ref. Part No. Number Description Qty Remarks
A1 CYLINDER HEAD 1 4JY-11111-00-00 HEAD, CYLINDER 1 (4JY-11111-01-00).......... 1 2 90116-08394-00 BOLT, STUD.............. 5 3 90176-08026-00 NUT, CROWN............. 5 4 90201-08087-00 WASHER, PLATE...........
More informationSlam-Cam Page. Material: a) Slam-Cam: zinc die, chrome plated Spring: steel, zinc plated Washer: Teflon
Slam-Cam Page 1-264 Slam-Cam for Slam Doors. Locking without key or tool. To a): The Teflon washer replaces the wave washer underneath the insert. Used with all Quarter- Turns and inserts according to
More informationCYLINDER HEAD CONTINUED ON NEXT FRAME. Ref. Part No. Number Description Qty Remarks
A1 CYLINDER HEAD 1 4JY-11111-00-00 HEAD, CYLINDER 1 (4JY-11111-01-00).......... 1 2 90116-08394-00 BOLT, STUD.............. 5 3 90176-08026-00 NUT, CROWN............. 5 4 90201-08087-00 WASHER, PLATE...........
More informationNumatic International Spare Parts Model No: Numatic International Spare Parts Model No: NB: FOR WIRING SEE DRAWING: DRW-7279
TTB 0 BASE ASSEMBLY EXPLODED DRAWING NB: FOR WIRING SEE DRAWING: DRW- 0 0 0 0 0 0 0 0 0 0 0 DRAWING: DRW-0 ISS:A0 /0/0 0 TTB 0 BASE ASSEMBLY EXPLODED DRAWING TTB 0 CHASSIS WELDED ASSEMBLY 0 TTB 0 HANDLE
More informationLOCKS Cam Locks P Push Locks P Plug Locks P Digital Locks P. 095
OCKS -1 Cam ocks P. 092-094 -2 Digital ocks P. 095-3 Push ocks P. 096-097 -4 Aluminium Frame & Drawer ocks P. 098-101 -5 Plug ocks P. 102-103 -6 Glass ocks P. 104-109 -1 Cam ocks Cam ock 16 * mm drilling
More informationCAM LOCKS CAM LOCK DD-CC ZAMAK - CHROME DD-CC ZAMAK - BLACK COATED DD-CC PLASTIC C C D D. web
063 LOCK ø 063 1-1-DD-CC ZAAK - CHROE 063 1-2-DD-CC ZAAK - BLACK COATED 063 2-0-DD-CC PLASTIC Quarter-turn operation Body length 20.5 mm (Please be sure to order appropriate cam) Available in all die-cast
More informationKeystone F89C Pneumatic Quarter-Turn Actuator Chemical Industry / Hazardous area
The F89C addresses the specific requirements for automated quarter-turn valves in the chemical industry on top of the reliability and low maintenance cost offered Features Valve connection compatible with
More informationPneumatic Rack & Pinion Actuator
Pneumatic Rack & Pinion Actuator 4120 N.E. Columbia Blvd. Portland Oregon USA 97211 Phone: 503-287-8383 Fax: 503-281-9677 www.fnwvalve.com STANDARD FEATURES Torque output range from 40 to 32,315 inch-pounds
More informationRhino-Rack Hybrid Bike Carrier (RBC050)
Important: Please read these instructions carefully prior to installation. Please refer to your fi tting instruction to ensure that the roof racks are installed in the correct locations. Check the contents
More informationACCESS SOLUTIONS. NEW PRODUCTS OVER
OVER 250 NEW PRODUCTS ACCESS SOLUTIONS Search our range of over 2000 RoHS and REACH compliant parts, and find your industry solution across cabinet manufacturing, machine building, power generators, HVAC,
More informationKEYSTONE F89 PNEUMATIC QUARTER-TURN ACTUATOR GENERAL PURPOSE / HAZARDOUS AREA
FEATURES Direct mounting to all Keystone butterfly valves and ball valves. Valve connection compatible with Keystone (imperial and metric) and ISO 5211. Double Rack and Pinion design nullifies side loads
More informationSECURELY HELD. OKW ACCESSORIES are designed to be practical, thus providing you with more flexibility for your individual case.
SECURELY HELD RATIONAL HINGE AND LOCKING TECHNIQUES For easy opening of the devices. THE PRODUCT WALL / RAIL OKW offers you a comprehensive range of. Adapted to the application, our standard cases can
More informationLOCKS ORB1. Orbit Lock. Whale Tail Compression Lock WTC140, WTP COMPRESSED 68 RELEASED. MATERIAL Stainless Steel 304, Die-Cast Zinc Alloy
118 117 Orbit Lock ORB1 140 70 14 Stainless 304, Die-Cast Zinc Alloy Polished Chrome WEIGHT 1.4kg 156 132 84 62 M6 mounting screws supplied Suitable for tough conditions Fits standard T-lock cutout ACCESSORIES
More informationPD-752. The Gledhill Road Machinery Co. ALWAYS INCLUDE SERIAL NO. OF PLOW WHEN ORDERING PARTS STD. MUSHROOM SHOE ASS Y P/N 7230-A11 MUSHROOM SHOE
STD. MUSHROOM SHOE ASS Y P/N 7230-A11 ITEM PART # QTY. DESCRIPTION 1 351-C 1 CRANK W/KNOB 2 5308-A393 1 BOLT ASS Y 3 5750-A2 1 CRANK COLLAR 4 6611-A 1 2-1/2 SHOE HOUSING 5 5308-A4 4 BOLT ASS Y 6 5750-A
More informationH3 Swinghandle System
192 H3 Swinghandle System Medium / large Sealed / non-sealed Zinc alloy swinghandle system Multiple locking options; including DIN profile Indoor/outdoor version Available for medium (125mm x 25mm and
More informationAC Single Point Actuator
130 AC Single Point Actuator T-handle Surface mount installation Generous grip area Pull to activate Cable clip 20.8 (.82) 21.7 (.85) 23 (.91) Housing: PC/ABS, black T-handle and slide: 33% glass-filled
More informationProduct Datasheet. 2. GRP large rain canopy. 3. GRP door. 4. G.I Mounting plate. 5. G.I Gland plate. 6. EPDM rubber gasket
POLYESTER ENCLOSURE SINGLE DOOR Product Datasheet GRP Single Door Enclosures are used for outdoor application with weatherproof and antistatic properties, finding their major application in the protection
More informationINLINE supplies a range of pneumatic 1/4 turn, RACK and PINION TYPE rotary actuators, in double-acting and spring return versions.
Note: The parts referred to by the numbers in parentheses are shown on page 3 of this instruction manual INLINE supplies a range of pneumatic / turn, RACK and PINION TYPE rotary actuators, in double-acting
More informationFURNITURE & CABINET LOCK
FURNITURE & CABINET LOCK LOCK HARDWARE Www.ammalocks.com DRAWER LOCKS 1 DRAWER LOCK (DIAMOND BACK) 15.7 2.7 106 ITEM NO: 106 100 key changes, K/A, K/D FINISHES: nickel PACKAGING: 2 keys SUITABLE FOR: 7/8"
More informationFigure RP ACTUATORS PNEUMATIC RACK & PINION.
Figure RP ACTUATORS PNEUMATIC RACK & PINION www.fnw.com TORQUE RANGES The RP rack and pinion actuators are available with output torques ranging from 44 to 36,269 in-lbs depending on air supply pressure
More informationAgricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
More informationThe Family Of... PO Box 200 Mauldin, SC Phone: Fax: compx.com
The Family Of... PO Box 200 Mauldin, SC 29662 Phone: 864-297-6655 Fax: 864-297-9987 Email: info@compx.com compx.com 3000 North River Road River Grove, IL 60171 Phone: 708-456-1100 Fax: 708-456-9476 Email:
More informationM/48, M/148. 3/2 Poppet Valves Electrically Actuated. Miniature, 22 mm normally closed and normally open models. Sub-base mounted and manifold mounted
M8, M Miniature, 22 mm normally closed and normally open models Sub-base mounted and manifold mounted 32 Poppet Valves Electrically Actuated M5 Manual override as standard Encapsulated coils with very
More informationACCESS SOLUTIONS NEW PRODUCTS BROCHURE.
ACCESS SOLUTIONS NEW PRODUCTS BROCHURE www.essentraaccesssolutions.com ESSENTIAL SOLUTIONS DELIVERED NEW PRODUCTS Locks Hinges Gaskets Handles Stainless Steel Products Electronic p3-6 p13 14 p17-18 p7-8
More informationParts and Instruction Manual Frontrunner Series Floor Machines Low Speed & Dual Speed
Parts and Instruction Manual Frontrunner Series Floor Machines Low Speed & Dual Speed Technical Specifications Model Nos. FM17-115 / FM20-115 / FM17-220 / FM20-220 / FM17-220-60 / FM20-220-60, FM202S-115
More informationPRODUCT GUIDE LANDSCAPE LIGHTING. fxl.com. A Hunter Industries Company
PRODUCT GUIDE LANDSCAPE LIGHTING A Hunter Industries Company fxl.com FINISHES Metals Powder coat Standard Powder coat Specialty s AB on copper AB on brass AT on copper AT on brass CU BS SS NP BZ DG WI
More informationPart-No. Article / Version Supply A Tilt foot bar of ABS, off-white RAL 9002 A
*Mounting angle ( ) on the adapter serves as a support to locate the case in the right position. After attachment of the adapter, the mounting angles can be easily removed. Tilt foot bar, Case feet TILT
More informationREPAIR PARTS LIST 31
LIST 31 Part Number Size Description List Price 0109-09-1601 16" Cover - Mild Steel $85.92 0109-03-1601 16" Cover - Aluminum $136.26 0109-07-1601 16" Cover - Stainless Steel 304 $329.09 0109-09-2001 20"
More informationAIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
More informationDETENTION ACCESSORIES
DETENTION ACCESSORIES Engineered to last 20 years to life. Designed with Durability in Mind PDI s standard and custom specification detention accessories are the most the cost-effective solution for new
More informationNumatic International Spare Parts Model No: Handle Assembly. Numatic International Spare Parts Model No: Handle Assembly
Handle Assembly NB: FOR WIRING SEE DRAWING: : DRW- 0 0 DRAWING: DRW-0 ISS: A0 /0/ 0 0 0 0 0 Handle Assembly 0 PROCESSED HANDLE CASTING MM DIA HOLE PLUG M X MM LONG HEX BOLT ADJUSTMENT GEAR M FORM A STAINLESS
More informationNumatic International Spare Parts Model No: Vario Chassis / Drive Motor Assembly NB: FOR WIRING SEE DRAWING: WD-0359
Model No: Vario Chassis / Drive Motor Assembly 0 0 0 0 0 0 DRAWING: EXP-0 ISS:A0 0/0/00 0 0 0 Model No: Vario Chassis / Drive Motor Assembly 00 CHASSIS WELDED ASSEMBLY (PAINTED ANTHRACITE GREY) 0 MM DIAMETER
More informationATEX 94/9/EC SIL3 IEC GOST-R TYPE APPROVAL
ATEX 94/9/EC SIL3 IEC 61508 GOST-R TYPE APPROVAL 95 90 75 Stroke 15 0 4. Universal and anti-blowout drive shaft It permits an easy conversion from parallel to diagonal square and vice versa. It is also
More informationSpare part list AutoCUT 500. Pos. No. Article no. Description pc Feed unit complete 1
AutoCUT 500 Article no. Description pc 1 8020901 Feed unit complete 1 2 8020911 Mill unit 1 3 8020921 Steering mechnism complete 1 4 8020861 Coasting rail complete 1 5 8020871 Intake rail complete 1 6
More informationstyle vision & paddle latches paddle latches section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
paddle latches vision & style paddle latches INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 1 paddle latches No. 4000 No. 4000 Mini
More informationAero Materiel. Locks and latches
Aero Materiel Locks and latches E3 Material and finish Zinc alloy, powder coated or chrome plated and steel plated Max static load 300N NEMA4/IP65 sealing is achieved by using optional flange gasket Recommended
More informationsection section eclipse series2 vision & style INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 15
vision & style section eclipse series INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 15 No. ECL-750-KP9 Patent pending No. ECL-750-KP9
More informationRhino-Rack Rocky Mount Bike Carrier (RBC050)
Important: Please read these instructions carefully prior to installation. Please refer to your fi tting instruction to ensure that the roof racks are installed in the correct locations. Check the contents
More informationFB Structural System. FlexMove Product Catalogue
Structural System 1 SB-40x40 Support Beam 40x40 Aluminium Anodized UOM : 3 meter / length SB-64x64 Support Beam 64x64 Aluminium Anodized UOM : 3 meter / length SB-64x64C Close slot Support Beam Aluminium
More informationCAMLOCKS
CAMLOCKS 2 www.illinoislock.com 800-733-3907 CUSTOM ENGINEERED SOLUTIONS With more than 80 years of experience in lock design and manufacturing, Illinois Lock Company has developed a broad range of engineered
More informationML EX V SERIES 20KW / 30KW DOMESTIC MODEL 2010 ALLMAND BROS. INC. P.O. BOX 888 HOLDREGE, NE, USA 68949
ML EX V SERIES 20KW / 30KW DOMESTIC MODEL 200 ALLMAND BROS. INC. P.O. BOX 888 HOLDREGE, NE, USA 68949 PHONE: (308)995-4495, -(800)562-373 ALLMAND FAX: (308) 995-5887 ALLMAND PARTS FAX: (308) 995-4883 ML
More informationRhino-Rack Hybrid Bike Carrier (RBC050)
CONTROLLED Rhino-Rack Hybrid Bike Carrier (RBC050) Important: Please read these instructions carefully prior to installation. Please refer to your fi tting instruction to ensure that the roof racks are
More informationAPS SERIES. Air Pump Shut Off Valves INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS
INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS APS SERIES APS-DBV-4FP 334 Friendship Drive, Magnolia, TX 77355 Tel.: 8-59-7768 Fax: 8-59-749 www.hyvair.com A0SR Standard Features Indicator A position indicator
More informationA comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves
KEYSTONE A comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves Features Direct mounting to all Keystone butterfly
More informationControl Units Ex e Glass Fiber Reinforced Polyester
Features Assembly Glass fiber reinforced polyester (GRP) enclosures Suitable for operation in Zones 1, 2, 21 and 22 Certified Ex de, Ex ib and Ex tb Up to 4 operators per control unit, base-mounted contact
More informationWORM GEAR 421F... Information. Radio and control accessories. Operating systems. for Venetian blinds. Operating systems. for rolling shutters
Information WORM GEAR 421F... Gerhard Geiger GmbH & Co. KG 1W12 en 41 Subject to technical modifications System components Electric motors for the Information Electric motors Mechanical drives : and :
More informationMECHANICAL LINEAR ACTUATORS
MECHANICAL LINEAR MECHANICAL LINEAR (Customized Stroke) WITH ADJUSTABLE GEARBOX Part No. MAU5040SS Part No. MAUX5040SS Part No. MAG5040SS WITH ADJUSTABLE GEARBOX (Customized Stroke) Part No. MAGX5040SS
More informationMakers of the famous TWO-POST AND FOUR-POST HOISTS & ACCESSORIES MOLNAR ENGINEERING PTY. LTD. MOLNAR JACKING BEAM
Makers of the famous TWO-POST AND FOUR-POST HOISTS & ACCESSORIES MOLNAR ENGINEERING PTY. LTD. MOLNAR JACKING BEAM MODELS JB87 STANDARD JB87A EXTRA WIDE PARTS IDENTIFICATION MANUAL Contents Home Page...
More information64 Push-to-Close Latch
244 64 Push-to-Close Latch Pull-to-open Paddle latch Miniature Plastic slide 11 (.42) Stainless steel, passivated and brushed finish and glass-filled reinforced nylon, black working load: 90 N (20 lbf)
More informationAVAILABLE MODELS AND SIZES SPECIFICATIONS
SPRINGS (Key 18) END CAP (Key 14) HOUSING (Key 1) INDICATOR CAP (Key 30) DRIVE SHAFT (Key 13) O-RING (Key 20) The Dyna-Flo D-Force actuator is a rugged dual piston scotch yoke actuator designed specifically
More informationDRAWER LOCK 19 MM AND 22 MM NOZZLE LENGTHS. Applications. Specifications. Code Information. Ordering Details
DRAWER LOCK 19 MM AND 22 MM NOZZLE LENGTHS This lock is ideal for use on drawers. Rotating the key 180º results in 9 mm vertical bolt movement. The lock fits into a 19.1 mm diameter hole from the rear
More informationHandle Stainless Steel. wgt. 0.24kg. Handle Plated Diecast Steel. wgt. 0.19kg. Handle Plated Diecast Steel. wgt. 0.08kg. Handle Plated Diecast Brass
HANDLES GRAB/PULL No. HAPL2550/265SS wgt. 0.24kg 265mm hole centres 2 x 10mm dia. fixing holes Plated Diecast Steel No. HAPL2923/150 wgt. 0.19kg 150mm hole centres 2 x 6mm dia. fixing holes Plated Diecast
More informationLocks and Catches Information
Information SYMO 3000 is the worldwide unique furniture locking system from Häfele. Without tools and time-consuming installation, it provides maximum flexibility at minimum expenditure and effort. The
More informationContents. ECCO single-phase. 1. Scissors assy Thread guide and eccentric drive Tucker plate assy
Contents Contents 1. Scissors assy.... 2-3 2. Thread guide and eccentric drive... 2-5 3. Tucker plate assy.... 2-7 4. Bobbin table with setting elements... 2-9 5. Secondary shaft with ejection elements...
More informationUT Series. Pneumatic Actuators. UT-**-DA Series UT-**-SR Series
UT-**-D Series UT-**-SR Series full range of double acting and spring return actuators designed to NMUR for air supply ports and top mounting with ISO 5211 for base mounting patterns. Features Dual adjustable
More informationNotes: Indirect. 5 1/2" 140mm. 5 1/32 128mm
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS Direct / Indirect Direct Indirect 5 1/2" 14mm 5 1/2" 14mm 5 1/2" 14mm SHOWN WITH LENS OPTION 5 1/32 128mm ORDERING CODE 5 1/32 128mm 5
More informationISO CYLINDERS SERIES HCR (High Corrosion Resistance) ACTUATORS
ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) 1 ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) In some applications, the cylinders are exposed to aggressive environments (e.g.
More informationBALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 516 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AD C D E F Kg AS C D
More informationWESTERN-CULLEN-HAYES, INC.
4-1 Western-Cullen-Hayes Highway Crossing Bells Western-Cullen-Hayes manufactures a wide range of electronic and mechanical warning bells for every type of highway crossing application. Loud and soft tone
More informationPneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return
Pneumatic Actuators Quarter Turn Rack & Pinion Double Acting and Spring Return SERIES Features Rack and pinion quarter turn (90 ) rotation Double acting and spring return models Prelubricated and tested
More informationNew Products Inside DUMETA OVERVIEW CATALOGUE COMPONENTS
New Products Inside DUMETA OVERVIEW CATALOGUE COMPONENTS 1 Modifications & Custom Components Diverse manufacturing capabilities and experienced on-site technical personnel allow Dumeta to offer a wide
More informationCOMPX TIMBERLINE REMOVABLE LOCK PLUG SYSTEM
COMPX TIMBERLINE REMOVABLE LOCK PLUG SYSTEM Wide Selection of Locks to Fit Most Furniture & Cabinet Applications Available in Several High Quality Finishes Removable Lock Plugs For Complete Keying Versatility
More informationACM SERIES Pneumatic Actuators
ACM SERIES Pneumatic Actuators ATEX ACHEM Controls Add: North Service Road #., Oakville, Ontario Canada Phone: --34 Cell: 0--004 E-mail: Kevin.armstrong@achemgroup.com www.achemgroup.com Skype: achemkevin
More informationEdition 1 June Air Grinder and Die Grinder. TA and TXA Series, Angle. Parts Information. Save These Instructions
16574055 Edition 1 June 2006 Air Grinder and Die Grinder TA and TXA Series, Angle Parts Information Save These Instructions TA and TXA Angle Grinder and Die Grinder Exploded Diagram 41 45 60 43 46 47 40
More informationHutchins Master Parts List Pricing Effective August 10, 2018
12027 2000 TUNE-UP KIT 59.59 12028 4500 TUNE-UP KIT 91.77 12029 3800 (Model 800) TUNE-UP KIT 80.87 1203-1S DUST BLOCK SCREW SET 1.33 1203S PAD ATTACHING NUTS (2) 0.70 1204 DRIVE SHOE COMPLETE 53.41 1204-1
More informationLEG EXTENSION OWNER'S MANUAL
TM LEG EXTENSION OWNER'S MANUAL REVISED: Sept. 2,1998 90 98 19 10 P 110 9 50,52A 150 SERIAL NO.'S through 109 1 2 5 6 8 Contents Parts Manual SEAT FRAME / CROSSMEMBER ASSEMBLY SEAT FRAME ASSEMBLY WORKBOX
More informationNumatic International Spare Parts Model No: TTV5565 Deck Assembly DRAWING: DRW-6930 ISS: A01 17/11/2010 NB: FOR WIRING SEE DRAWING: DRW-5329
Model No: TTV Deck Assembly 0 0 DRAWING: DRW-0 ISS: A0 // 0 0 0 0 Model No: TTV Deck Assembly 0 MACHINED ALUMINIUM CAST DECK 00 LEFT HAND MOTOR PLATE (ZINC PLATED) 00 DECK LIFTING PLATE (ZINC PLATED) 000
More informationOver 80 years of service to the security industry. A CUT ABOVE. The proven Ace II. original tubular lock, with its all brass.
A CUT ABOVE. The proven Ace II original tubular lock, with its all brass construction and patented assembly process, provides professional locksmiths and their customers with excellent security at value
More informationSection 21 Actuators. (Electric and Pneumatic) Edition 2
Section 21 Actuators (Electric and Pneumatic) Edition 2 291 [21] ACTUATORS Pneumatic Actuator FEATURES OF SINGLE AND DOUBLE ACTING ACTUATORS - Self Energizing V-Seal piston ring - Double rack & Pinion
More informationPENDANT MOUNT - DIRECT
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 4K CABLE 2 1 /4 STEM 2 1 /4 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.6 W/ft 111 lm/w 5 lm/ft 4.7 W/ft 16 lm/w 75 lm/ft 7.5 W/ft 1 lm/w 1 lm/ft
More information3540 Series Short Backset Mortice Locks. Keeler Hardware. telephone
3540 Series Short Backset Mortice Locks ASSA ABLOY, the global leader in door opening solutions 2 Contents 3540 Series Short Backset Motice Locks 1 3540 Series General Information 2 3540 Short Backset
More informationPRONE LEG CURL OWNER'S MANUAL
TM TM 97 105 19 1 1 73 PRONE LEG CURL OWNER'S MANUAL REVISED: May 15,1998 119 51 SERIAL NO.'S through Contents Parts Manual 1 3 4 5 6 7 8 SEAT FRAME ASSEMBLY WORKBOX & CROSSMEMBER ASSEMBLY MOVEMENT ARM
More informationThe illustrations in the document are for reference purposes only and may not depict actual products Page 1
23.4.2018 Page 1 2 1 6 3 8 4 Other Accessories 5 7 23.4.2018 Page 2 Index Code Item Compatibility/Description Additional information Page 1 200224 BARRELED RECEIVER RELATED PARTS 4 2 200225 BOLT RELATED
More informationOver 80 years of service to the security industry. A Cut Above. The proven Ace II. original tubular lock, with its all brass.
A Cut Above. The proven Ace II original tubular lock, with its all brass construction and patented assembly process, provides professional locksmiths and their customers with excellent security at value
More informationANTI-BLOWOUT SYSTEM MOUNTING VARIATIONS. NOMINAL VALUES: Pressure rating max 115 PSI Temperature range: UNI 6060:
4 5 1 2 6 8 7 3 92 1 2 3 NOMINL VLUES: Pressure rating max 115 PSI Temperature range: Pre lubricated for life of actuator on assembly From MOD. 52 up to 140 supply chambers MOD. 160-200-270 Standard polyester
More informationContents SIGMA. 1. Scissors assy Thread guide and eccentric drive Tucker plate assy
Contents Contents 1. Scissors assy.... 2-3 2. Thread guide and eccentric drive... 2-5 3. Tucker plate assy.... 2-7 4. Bobbin table with setting elements... 2-9 5. Secondary shaft with ejection elements...
More information