THERIS FAMILY OF VALVES

Transcription

1 THEIS FAMILY OF VALVES The Phoenix Controls Theris Family of Valves is designed specifically for the ventilation requirements of critical spaces in healthcare facilities, where infection control, energy savings and reducing maintenance costs are an important part of business operations. Exhaust duct Tracking Exhaust Valve (optional shutoff) T H Theris provides constant volume (CV) and variable air volume (VAV) solutions for directional airflow, climate control, and overall ventilation balance. System enefits Factory characterization reduces system commissioning time Pressureindependent valves avoid rebalancing costs o flow sensors to maintain High turndown ratios contribute to reducing energy costs PODUCT MODELS Four venturi valve options are available in the Theris family: PODUCT TherisTP (Tracking Pair VAV) TherisTX (Enhanced Tracking Pair VAV) TherisSO (Supplyonly VAV) TherisCV (Constant Volume) SPECIFICATIOS DESCIPTIO To meet the need of directional airflow, TherisTP features tracking valve pairs that maintain a prescribed CFM offset to enable accurate space pressurization and complete room climate control. For tracking pair applications in isolation rooms, operating rooms, and other spaces, TherisTX provides extra I/O to meet the needs of humidity control and pressure monitoring, plus optional shutoff capability for decontamination procedures. In VAV applications where ducted exhaust is sufficient to meet local codes and engineering guidelines, TherisSO provides a costeffective supply valve when no tracking exhaust valve is required. For fixedflow operation and stable airflow throughout the facility, TherisCV provides a solution for constant volume supply and exhaust applications. Theris Valves Active Pressure Monitor Supply Valve (optional shutoff) Supply duct The TherisTX valve maintains directional airflow with variable air volume (VAV) temperature and humidity control. More room control applications are described on page. Power: Vac 0/0 Hz Power consumption (using proportional reheat control): Single 8, 0, : VA; Single : 0VA Dual 0,, : 0 VA Power consumption (using floating point reheat control): Single 8, 0, : 0 VA; Single : VA Dual 0,, : VA Input accuracy: Voltage, current, resistance: ±% full scale Output accuracy: 0 to 0 Vdc: ±% full scale into 0 KΩ minimum to 0 ma: ±% full scale into 00 Ω 0/0 Ω Interoperability: ased on LOWOKS technology for peertopeer communication between room controllers LonMark certified according to the Interoperability uidelines Version. LonMark functional profile SCCVAV #80 Agency compliance: CE CSA FCC Part, Subpart J, Class A oomlevel communications: FTT0, 8 K, LonTalk network Construction ga. spun aluminum valve body with continuous welded seam Aluminum valve body Composite Teflon shaft bearings Spring grade stainless steel spring and PPS slider assembly Supply valves insulated with /8"(9. mm) flexible closedcell polyethylene. Flame/ smoke rating /0. Density is lb/ft ( kg/m ) Operating ange F (00 C) ambient 090% noncondensing H Performance Pressure independent over a 0.".0" WC ( Pa) drop across valve Volume control accurate to ±% of airflow command signal o additional straight duct runs needed before or after valve Available in flows from 000 CFM (989 m /hr) esponse time to change in command signal: < minute Sound Designed for low sound power levels to meet or exceed ASHAE noise guidelines Teflon is a registered trademark of DuPont Co. LOWOKS is a registered trademark of Echelon Corp. LOMAK and the LOMAK Logo are managed, granted, and used by LOMAK International under a license granted by Echelon Corporation. TALE OF COTETS Product Models... Specifications... Features... Available Inputs & Outputs... Applications... Ordering uide... Wiring... etwork Variables... 8 Points... Maintenance... Discovery Way Acton, Massachusetts 00 Telephone (98) 98 Fax (98) Phoenix Controls Corporation. Specifications subject to change without notice. ev. /08 MKT08 MPC THEIS FAMILY OF VALVES OF

2 FEATUES FEATUE THEIS MODEL DESCIPTIO Pressure independence All CFM airflow maintained regardless of changes in duct static pressure. o flow sensors All Factory flow characterization eliminates the need for flow sensors. Airflow offset maintained TP, TX, CV Supply and exhaust CFM offset settings maintain accurate pressurization. Temperature and occupancy control Humidity control and pressure monitoring TP, TX, SO TX AVAILALE IPUTS AD OUTPUTS* Primary and secondary PID loops. Occupied, unoccupied or standby. uilding Management System (MS) or local set point input. Humidity monitoring and control. Pressure monitoring. MS control available. HVAC emergency modes TP, TX, SO Multiple modes available. Custom setup for each mode. Floating point reheat TP, TX, SO Control algorithm and TIAC support for tristate hydronic reheat valves. Proportional reheat TP, TX, SO Control algorithm and AO support for proportional hydronic reheat valves. Up to Standard LO etwork Variable Types (SVT) per I/O point available to Flexible I/O TP, TX, SO read/write via LonTalk. Additional inputs/outputs (I/O) TX Two additional universal inputs (humidity, pressure). Shutoff capability TX Optional shutoff valve configuration enables room decontamination procedures. TP = Tracking pair VAV TX = Enhanced Tracking pair VAV CV = Constant volume SO = Supplyonly VAV APPLICATIOS TYPE DESCIPTIO Universal input UI Dry contact (<00 Ω = Closed, >00 KΩ = Open), 00. Vdc, 0 ma, Thermistor TC and (resistance 00 KΩ) Universal input UI Same as UI Universal input UI Same as UI Universal input UI ** Same as UI ; for humidity sensor or spare Universal input UI ** Same as UI ; for Active Pressure Monitor (APM) pressure sensor or spare Digital input DI Dry contact (<00 Ω = Closed, >00 KΩ = Open); logic level (<0. Vdc = OFF, >. Vdc = O) Analog output AO 00. Vdc, 0 ma Analog output AO Same as AO Digital output DO Type C, Vac/Vdc TIAC Main valve control TIAC to control main lowspeed actuator TIAC Tracking valve control TIAC to control tracking lowspeed actuator TIAC Floating point reheat control TIAC to control Vac floating point actuator for reheat valve; VA Vac * The flow tracking function does not use any of the inputs or outputs above. For more details, see the wiring diagrams on pages 80. o I/O available on TherisCV. ** Available only on TherisTX. Pressure Independence Phoenix Controls venturi valves use a simple mechanical regulator to compensate for the changes in static pressure, so accurate flow control is assured at all times. Unlike commercial controls that use velocity pressure sensors mounted in the airstream, venturi valves are impervious to dust, dirt and sensor drift. Phoenix Controls valves continue to work even in the event of a power failure, assuring that the correct room pressurization and directional airflow are maintained at all times. Unique 8point flow characterization curves for the supply and exhaust valves serving the room are downloaded to every Theris oom Controller s onboard microprocessor before the valves leave the factory. The controller uses this flow data to accurately control flowtracking between the two valves, virtually eliminating the need for field calibration and rebalancing. OF THEIS FAMILY OF VALVES MKT08 MPC 008 Phoenix Controls Corporation. Specifications subject to change without notice. ev. /08

3 APPLICATIOS (COTIUED) TherisTP VAV isolation or patient room VAV tracking pair (one supply and one exhaust valve) TherisTX Enhanced VAV tracking pair Operating rooms and other critical pressurized spaces Exhaust duct Tracking Exhaust Valve (optional shutoff) T H Supply Valve (optional shutoff) Supply duct This patient room has a TherisTP valve on the supply and exhaust sides. Supply and exhaust valves track airflow rates to maintain room pressure and offset. The TherisTP supply valve can have an associated temperature sensor and control a hot water valve, as well as a second stage of heating, if needed. An optional duct temperature sensor can be placed in the ductwork on either the supply or exhaust side to monitor or control temperature. Active Pressure Monitor Applications for TherisTX include operating rooms, isolation rooms, hazardous materials storage, pharmacies, and other critical spaces. The available functionality includes all the features of TherisTP, plus full temperature control, humidity control, and valve shutoff capability. TherisSO VAV patient room Standalone supply with ducted return TherisCV Constant volume patient room Constant volume with supply and exhaust This patient room has a standalone TherisSO valve on the supply side and a ducted return on the exhaust side. The TherisSO valve can have an associated temperature sensor and control a hot water valve. An optional temperature sensor can be placed in the ductwork to monitor duct temperature either on the supply or exhaust side. This patient room has a TherisCV (constant volume) valve on the supply and exhaust sides. Temperature control can be managed by a separate controlling thermostat. Equipment can be set and left alone. o maintenance is required and valves will keep these flow settings indefinitely. 008 Phoenix Controls Corporation. Specifications subject to change without notice. ev. /08 MKT08 MPC THEIS FAMILY OF VALVES OF

4 ODEI UIDE HSV A 0 M A L E H P VALVE FAMILY HSV = Supply valve with insulation HEV = Exhaust valve VALVE COSTUCTIO A = ody and cone uncoated aluminum; shaft uncoated stainless steel UME OF VALVE ODIES F = One valve body with welded circular flange (single flanged) = One valve body (single, no flange) = Two valve bodies (dual, 0", " and " only) = Three valve bodies (CVV only) = Four valve bodies (CVV only) VALVE SIZE 08 = 8" valve (.88"/00 mm actual diameter) 0 = 0" valve (9.88"/ mm actual diameter) = " valve (.88"/0 mm actual diameter) = " valve (.88"/ mm actual diameter) FLOW/PESSUE OPEATI AE SEE TALES AD VALVE OPTIOS (As required; list alphabetically, then numerically) = Square flanges on each end of single body valves F = Single square flange mounted on either: Inlet of single body exhaust valves or Discharge of single body supply valves P = Pressure switch (see note ) = emote electronics O = Power supply, valve mounted, 0 V T = Power supply, valve mounted, 0 V U = Insulation blocks only, O insulation V = Exhaust valve insulation blocks AD insulation FAIL SAFE POSITIO F = Fixed flow supply X = Fixed flow exhaust = Supply valve fail in place M = Exhaust valve fail in place VALVE OIETATIO H = Horizontal U = Vertical upflow D = Vertical downflow VALVE COTOLLE DESIATIO E = TherisTP Supply X = TherisTX Supply O = TherisSO Supply = o controller (exhaust valves and constant volume only) COTOL TYPE L = Standard speed electric actuation C = Constant volume TALE FLOW/PESSUE OPEATI AE FO VALVE DESI 'A' VALVE DESI A = Conical shape diffuser (see Table ) S = Shutoff Valve body (see Table and note ) L = Lowleakage valve body (see Table and note ) Operating ange Designation Size in CFM (m³/hr) Pressure Drop Single Dual Across Valve 08" 00 (989) " (899) (098) M = Medium pressure 0..0" WC " " (9 Pa) (9) (9) (009) (8089) 08" 00 (980) L = Low pressure " WC 0" (89) (089) ( Pa) " (8) (08) TALE FLOW/PESSUE OPEATI AE FO VALVE DESIS 'S' AD 'L' Operating ange in CFM (m/hr) Pressure Drop Designation Size Single Dual Across Valve 08" 00 (009) M = Medium pressure " WC 0" (8) (0888) (00 Pa) " (09) (0) OTES:. Pressure switch set point for medium and low pressure = 0." WC ( Pa).. Medium pressure only. OF THEIS FAMILY OF VALVES MKT08 MPC 008 Phoenix Controls Corporation. Specifications subject to change without notice. ev. /08

5 WII (See submittal wiring diagram for projectspecific details.) TherisTP Main Valve T Main Valve Floating Point eheat Valve c by others Tracking Valve L L D ET A ET T T S S T T (MAI) (TK) P.S. P.S. (MAI) (TK) Vac Power Twisted pair I/O Connections for field devices UI UI UI DI DO AO AO O C 8 L L D A T T T T T T T P S P S c by others (see note below) or c by others (see note below) 8 cw OTE: Maximum cable length 0 feet, AW PS Optional T S S S T FTT0 Channel UI UI UI DI O COM C DO AO AO Jumper Configuration for AO and AO Jumper Configuration for UI, and (S, S, S) TherisTP Tracking Valve Factory Wiring Voltage Current Voltage Current esistance/ Contact/ Thermistor 8 PS Field Wiring Euro Style lock Potentiometer, actuator and pressure switch wiring TEMIAL LOCKS Terminal lock Typical Function o. of Terminations T Input connections 8 T Output connections T Main and tracking valve pot and pressure switch 0 T Power ( Vac input) T Main and tracking lowspeed electric actuators T Communication (FTT0) T Floating point actuator on reheat valve 008 Phoenix Controls Corporation. Specifications subject to change without notice. ev. /08 MKT08 MPC THEIS FAMILY OF VALVES OF

6 WII (COTIUED) (See submittal wiring diagram for projectspecific details.) TherisTX Main Valve Floating Point eheat Valve L L D ET A ET T T S S S S T T8 T T (MAI) (TK) P.S. P.S. (MAI) (TK) UI UI Twisted pair Vac Power I/O Connections for field devices UI UI UI DI DO AO AO O C 8 L L D A Main Valve T T T T T8 T T T P S P S UI UI c by others c by others (see note below) or c by others (see note below) 8 Tracking Valve cw OTE: Maximum cable length 0 feet, AW PS Optional T S S S T FTT0 Channel UI UI UI DI O COM C DO AO AO Jumper Configuration for AO and AO Jumper Configuration for UI,,, and (S, S, S, S, S) TherisTX Tracking Valve Factory Wiring Voltage Current TEMIAL LOCKS Voltage Current esistance/ Contact/ Thermistor 8 PS Field Wiring Euro Style lock Potentiometer, actuator and pressure switch wiring Terminal lock Typical Function o. of Terminations T Input connections 8 T Output connections T Main and tracking valve pot and pressure switch 0 T Power ( Vac input) T Main and tracking lowspeed electric actuators T Communication (FTT0) T Floating point actuator on reheat valve T8 Additional input connections OF THEIS FAMILY OF VALVES MKT08 MPC 008 Phoenix Controls Corporation. Specifications subject to change without notice. ev. /08

7 WII (COTIUED) (See submittal wiring diagram for projectspecific details.) TherisSO Main Valve T Main Valve Floating Point eheat Valve c by others L L D T T (MAI) I/O Connections for field devices UI UI UI DI DO AO AO O C 8 T T T T Vac Power ET A ET T T P S (MAI) Twisted pair L L D T P S S S S S S A T T T UI UI UI DI O COM C DO AO AO T FTT0 Channel OTE: Maximum cable length 0 feet, AW Jumper Configuration for AO and AO Jumper Configuration for UI, and (S, S, S) Voltage Current Voltage Current esistance/ Contact/ Thermistor TEMIAL LOCKS Terminal lock Typical Function o. of Terminations T Input connections 8 T Output connections T Main and tracking valve pot and pressure switch T Power ( Vac input) T Main and tracking lowspeed electric actuators T Communication (FTT0) T Floating point actuator on reheat valve 008 Phoenix Controls Corporation. Specifications subject to change without notice. ev. /08 MKT08 MPC THEIS FAMILY OF VALVES OF

8 LOMAK OJECTS & ETWOK VAIALES SccVavFlow Object Type 00 nv nviflowoffsetcmd SVT_flow_f nv nvototalsupflow SVT_flow nv nviminsupflowcmd SVT_flow nv nvototalexhflow SVT_flow nv nviflowoverride SVT_hvac_overid nv8 nvoflowoffet SVT_flow_f nv nvihvacemergcmd SVT_hvac_emerg nv9 nvoeffflwoffstsp SVT_flow_f nv nviiaqdmd SVT_lev_percent nv0 nvomainvalveflow SVT_flow nv9 nv0 nviiflow_ SVT_flow nviiflow_ SVT_flow etwork Variables nv nv nvotrkvavleflow SVT_flow nvoeffmainflowsp SVT_flow nv nvoefftrkflowsp SVT_flow nv nvototalsysflows UVT_Sys_Flows nv nvotpflowdata UVT_TpFlowData nv8 nvopressure SVT_press_p Configuration Properties ncitpflowcfg ncizonesetpoints ncivalveparam[] ncicvhrtt_flw nvisndhrtt_flw nciminouttm_flw UCPTvavFlowCfg UCPTzoneSetpoints UCPTvalveParam SCPTmaxcvTime SCPTMaxSendTime SCPTminSendTime 8 OF THEIS FAMILY OF VALVES MKT08 MPC 008 Phoenix Controls Corporation. Specifications subject to change without notice. ev. /08

9 LOMAK OJECTS & ETWOK VAIALES (COTIUED) SCCVAV Object Type 80 nv nvispacetemp SVT_temp_p Mandatory etwork Variables nv nv nvospacetemp SVT_temp_p nvounitstatus SVT_hvac_status nv nvitempsetpt SVT_temp_p nv8 nvoefftempsetpt SVT_temp_p nv nvioccoverride SVT_occupancy nv9 nvoeffoccmode SVT_occupancy nv nvioccsensor SVT_occupancy nv nvodischairtemp SVT_temp_p nv8 nv0 nviapplicmode SVT_hvac_mode nvispaceh SVT_lev_percent Optional etwork Variables nv nv nvoterminalload SVT_lev_percent nvospaceh SVT_lev_percent Configuration Properties ncisndhrtt_vav ncisetpoints Mandatory SCPTmaxSendTime SCPTsetPnts ncicvhrtt_vav nciminouttm_vav Optional SCPTmaxcvTime SCPTminSendTime nv8 nviunocccoolstpt SVT_temp_p nv8 nvoauxtempcmd SVT_switch nv8 nviunoccheatstpt SVT_temp_p nv8 nvosccdata UVT_Scc_Data nv8 nviauxtempsetpt SVT_temp_p etwork Variables nv9 nvoeffhsetpt SVT_lev_percent nv8 nvilclleverebl SVT_switch nv9 nvohctrlcmd SVT_lev_percent nv9 nvihsetpt SVT_lev_percent Configuration Properties ncisccvavcfg nciauxtempsetpt ncifltptctrlcfg ncitemppidparam[] ncihcfg ncihpidparam[] UCPTsccVavCfg UCPTauxTempSetpt UCPTFltPtCtrlCfg UCPTpidParam UCPTsccHCfg UCPTpidParamH 008 Phoenix Controls Corporation. Specifications subject to change without notice. ev. /08 MKT08 MPC THEIS FAMILY OF VALVES 9 OF

10 LOMAK OJECTS & ETWOK VAIALES (COTIUED) TrcDevice Object Type 00 nv nvimanoverride UVT_Man_Override nv nvoalarmstate SVT_state_ nv nviaocmd_ UVT_Switch nv8 nvoengdata UVT_Eng_TrcVav nv nviaocmd_ UVT_Switch nv9 nvomspdata UVT_TpMsp_Data nv nvidocmd UVT_Switch nv0 nvolocalalarm UVT_Switch nv nvifloatdrivecmd UVT_Switch nv nvoappstatus UVT_App_Status etwork Variables nv nvoui_ UVT_count_inc nv nvoui_ UVT_count_inc nv nvoui_ UVT_count_inc nv nvoui_ UVT_count_inc nv nvoui_ UVT_count_inc nv nvodi UVT_switch Configuration Properties ncidevicecfg nciuiconfig[] nciaoconfig[] ncidiconfig ncidoconfig ncilcloutcmdcfg[] ncicvhrtt_dev ncisndhrtt_dev nciminouttm_dev UCPTlvcDeviceCfg UCPTunivInputParam UCPTanalogOutputParam UCPTdigitalInputParam UCPTdigitalOutnputParam UCPTlclOutCmdCfg SCPTmaxcvTime SCPTmaxSendTime SCPTminSendTime PccEmergency Object Type 000 nv nvipccemergcmd UVT_Emergency etwork Variables nv nvoeffpccemerg UVT_Emergency nciemergcfg UCPTemergCtrlCfg 0 OF THEIS FAMILY OF VALVES MKT08 MPC 008 Phoenix Controls Corporation. Specifications subject to change without notice. ev. /08

11 POITS The two tables in this section contain points available for integration in a building management system (MS). Table is a list of points for open LO integration and Table is a list of points for integration through the Celeris servers. Table. Points for Open LO Integration Description Object Type Object ame etwork Variable Type (SVT) etwork Variable (V) ame Space temperature sensor input 80 SCC VAV SVT_temp_p nvispacetemp Occupied temperature set point input 80 SCC VAV SVT_temp_p nvitempsetpt Occupied override input 80 SCC VAV SVT_occupancy nvioccoverride Occupancy sensor override 80 SCC VAV SVT_occupancy nvioccsensor Application mode command input 80 SCC VAV SVT_hvac_mode nviapplicmode Unoccupied cooling temperature set point 80 SCC VAV SVT_temp_p nviunocccoolstpt Unoccupied heating temperature set point 80 SCC VAV SVT_temp_p nviunoccheatstpt Auxiliary temperature set point input 80 SCC VAV SVT_temp_p nviauxtempsetpt Local temperature set point lever enable/scaling input 80 SCC VAV SVT_switch nvilclleverebl Space relative humidity sensor input 80 SCC VAV SVT_lev_percent nvispaceh Space relative humidity set point input 80 SCC VAV SVT_lev_percent nvihsetpt Effective space temperature output 80 SCC VAV SVT_temp_p nvospacetemp Unit HVAC status output 80 SCC VAV SVT_hvac_status nvounitstatus Effective space temperature set point output 80 SCC VAV SVT_temp_p nvoefftempsetpt Effective occupancy mode status output 80 SCC VAV SVT_occupancy nvoeffoccmode Discharge air temperature output 80 SCC VAV SVT_temp_p nvodischairtemp Terminal load output 80 SCC VAV SVT_lev_percent nvoterminalload Auxililary temperature control loop command output 80 SCC VAV SVT_switch nvoauxtempcmd Effective space relative humidity output 80 SCC VAV SVT_lev_percent nvospaceh Effective space relative humidity set point output 80 SCC VAV SVT_lev_percent nvoeffhsetpt Space humidity control command output 80 SCC VAV SVT_lev_percent nvohctrlcmd MS zone flow offset set point input 00 SCC VAV FLOW SVT_flow_f nviflowoffsetcmd MS minimum supply flow set point input 00 SCC VAV FLOW ST_flow nviminsupflowcmd MS HVAC flow override command input 00 SCC VAV FLOW SVT_hvac_overid nviflowoverride MS HVAC emergency override input 00 SCC VAV FLOW SVT_hvac_emerg nvihvacemergcmd IAQ command input 00 SCC VAV FLOW SVT_lev_percent nvilaqcmd Additional flow # input 00 SCC VAV FLOW SVT_flow nviflow_ Additional flow # input 00 SCC VAV FLOW SVT_flow nviflow_ Zone total supply flow output 00 SCC VAV FLOW SVT_flow nvototalsupflow Zone total exhaust flow output 00 SCC VAV FLOW SVT_flow nvototalexhflow Zone volumetric offset feedback output 00 SCC VAV FLOW SVT_flow_f nvoflowoffset Effective zone volumetric offset set point output 00 SCC VAV FLOW SVT_flow_f svoeffflwoffstsp Supply valve flow feedback output 00 SCC VAV FLOW SVT_flow nvomainvalveflow Exhaust valve flow feedback output 00 SCC VAV FLOW SVT_flow nvotrkvalveflow Effective supply valve flow set point output 00 SCC VAV FLOW SVT_flow nvoeffmainflowsp Effective exhaust valve flow set point output 00 SCC VAV FLOW SVT_flow nvoefftrkflowsp Space relative pressure output 00 SCC VAV FLOW SVT_press_p nvopressure MS AO port override input 00 TrcDevice SVT_switch nviaocmd_ MS AO port override input 00 TrcDevice SVT_switch nviaocmd_ MS DO port override input 00 TrcDevice SVT_switch nvidocmd MS floating point drive override input 00 TrcDevice SVT_switch nvifloatdrivecmd Current alarm status of all alarm bits output 00 TrcDevice SVT_state_ nvoalarmstate Universal input port feedback output 00 TrcDevice SVT_count_inc nvoui_ Universal input port feedback output 00 TrcDevice SVT_count_inc nvoui_ Universal input port feedback output 00 TrcDevice SVT_count_inc nvoui_ Universal input port feedback output 00 TrcDevice SVT_count_inc nvoui_ Universal input port feedback output 00 TrcDevice SVT_count_inc nvoui_ Digital input port feedback output 00 TrcDevice SVT_count_inc nvodi 008 Phoenix Controls Corporation. Specifications subject to change without notice. ev. /08 MKT08 MPC THEIS FAMILY OF VALVES OF

12 POITS (COTIUED) Table. Points for Integration through the Celeris Servers Description etwork Variable Type (SVT/UVT) etwork Variable (V) ame Field ame Occupied temperature set point input SVT_temp_p nvitempsetpt nvitempsetpt Occupancy override input SVT_occupancy nvioccoverride nvioccoverride Application mode command input SVT_hvac_mode nviapplicmode nviapplicmode Unoccupied cooling temperature set point SVT_temp_p nviunocccoolstpt nviunocccoolstpt Unoccupied heating temperature set point SVT_temp_p nviunoccheatstpt nviunoccheatstpt Auxiliary temperature set point input SVT_temp_p nviauxtempsetpt nviauxtempsetpt Local temperature set point lever scaling input SVT_switch.value nvilclleverebl value Local temperature set point lever enable input SVT_switch.state nvilclleverebl state Space relative humidity set point input SVT_lev_percent nvihsetpt nvihsetpt Effective space temperature output SVT_temp_p nvosccdata SpaceTemp Phoenix temperature mode status output PHX_TEMP_MODE nvosccdata PccTempMode HVAC mode status output SVT_hvac_mode nvosccdata HvacTempMode Effective space temperature set point output SVT_temp_p nvosccdata EffSpaceTempSP Effective auxiliary temperature set point output SVT_temp_p nvosccdata EffAuxTempSP Effective occupancy mode status output SVT_temp_p nvotpflowdata EffOccMode Discharge air temperature output SVT_temp_p nvosccdata DschrgAirTemp Exhaust air temperature output SVT_lev_percent nvosccdata ExhaustAirTemp Primary temperature loop cooling command output SVT_lev_percent nvosccdata PrimaryCoolCmd Primary temperature loop heating command output SVT_lev_percent nvosccdata PrimaryHeatCmd Auxiliary temperature control loop command output SVT_switch.value nvosccdata AuxTempCmd.value Auxiliary temperature control loop status (O/OFF) SVT_switch.state nvosccdata AuxTempCmd.state Effective space relative humidity output SVT_lev_percent nvosccdata SpaceH Effective space relative humidity set point output SVT_lev_percent nvosccdata EffSpaceHSetpt Space humidity control command output SVT_lev_percent nvosccdata HumidifyCmd Space dehumidity control command output SVT_lev_percent nvosccdata DehumidifyCmd MS zone flow offset set point input SVT_flow_f nviflowoffsetcmd nviflowoffsetcmd MS minimum supply flow set point input ST_flow nviminsupflowcmd nviminsupflowcmd MS HVAC flow override command input SVT_hvac_overid nviflowoverride nviflowoverride MS HVAC emergency override input SVT_hvac_emerg nvihvacemergcmd nvihvacemergcmd IAQ command input SVT_lev_percent nvilaqcmd nvilaqcmd Zone total supply flow output SVT_flow nvotpflowdata uwtotalsup Zone total exhaust flow output SVT_flow nvotpflowdata uwtotalexh Zone volumetric offset feedback output SVT_flow_f nvotpflowdata swflowoffset Effective zone volumetric offset set point output SVT_flow_f nvotpflowdata sweffflowoffsetcmd Supply valve flow feedback output SVT_flow nvotpflowdata uwmainflow Exhaust valve flow feedback output SVT_flow nvotpflowdata uwtrackflow Effective supply valve flow set point output SVT_flow nvotpflowdata uweffmainflowsp Effective exhaust valve flow set point output SVT_flow nvotpflowdata uwefftrackflowsp Space relative pressure output SVT_press_p nvopressure nvopressure MS AO port override command value input SVT_switch.value nviaocmd_ value MS AO port override command state input SVT_switch.state nviaocmd_ state MS AO port override command value input SVT_switch.value nviaocmd_ value MS AO port override command state input SVT_switch.state nviaocmd_ state MS DO port override command value input SVT_switch.value nvidocmd value MS DO port override command state input SVT_switch.state nvidocmd state MS floating point drive override command value input SVT_switch.value nvifloatdrivecmd value MS floating point drive override command state input SVT_switch.state nvifloatdrivecmd state Supply valve jam alarm output SVT_state_ nvoalarmstate JamAlarm Supply valve flow alarm output SVT_state_ nvoalarmstate FlowAlarm Exhaust valve jam alarm output SVT_state_ nvoalarmstate JamAlarm OF THEIS FAMILY OF VALVES MKT08 MPC 008 Phoenix Controls Corporation. Specifications subject to change without notice. ev. /08

13 Description etwork Variable Type (SVT/UVT) etwork Variable (V) ame Field ame Exhaust valve flow alarm output SVT_state_ nvoalarmstate FlowAlarm Universal input port feedback output SVT_count_inc nvoui_ nvoui_ Universal input port feedback output SVT_count_inc nvoui_ nvoui_ Universal input port feedback output SVT_count_inc nvoui_ nvoui_ Universal input port feedback output SVT_count_inc nvoui_ nvoui_ Universal input port feedback output SVT_count_inc nvoui_ nvoui_ Digital input port feedback output SVT_switch nvodi nvodi Phoenix emergency mode command imput UVT_Emergency nvipccemergcmd nvipccemergcmd Effective Phoenix emergency mode status output UVT_Emergency nvotpflowdata EffPccEmergMode Effective HVAC emergency mode status output SVT_hvac_emerg nvotpflowdata EffHvacEmergMode MAITEACE Theris valves require no ongoing preventive maintenance. Once the field engineer has completed the field startup, the valves will provide years of continuous operation. FCC COMPLIACE FO DIITAL VALVES WAI: Changes or modifications to this unit not expressly approved by the party responsible for compliance (Phoenix Controls) could void the user s authority to operate the equipment. OTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part of the FCC ules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual (Phoenix Controls product data sheets and wiring diagrams), may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. 008 Phoenix Controls Corporation. Specifications subject to change without notice. ev. /08 MKT08 MPC THEIS FAMILY OF VALVES OF