TRACCEL FAMILY OF VALVES LONMARK Certified

Transcription

1 TRACCEL FAMILY OF VALVES LOMARK Certified The Phoenix Controls Traccel Family of Valves is designed specifically for the ventilation requirements of demanding spaces in life science lab facilities, where ventilation zone control, energy savings and reducing maintenance costs are an important part of business operations. These valves provide a safe, comfortable working environment for research in a single standalone lab or an entire research complex. The flexibility, airflow turndown, and added configuration options make it an ideal solution for modular mixeduse facilities. Life science research spaces designed with an open lab and fume hood alcoves require a unique ventilation control solution. As airflow or pressurization requirements change, the impact on adjacent spaces like bench work areas, offices, and common corridors contribute directly to the balance of the entire lab. The adjacent spaces must adapt to airflow changes controlled by critical spaces like fume hood alcoves. The Traccel Family of Valves is a costeffective platform for ventilation control applications for these adjacent spaces. It uses the LonWorks Communication Protocol to develop peertopeer control architecture with highspeed Celeris or normalspeed Traccel Valve Controllers for the desired research space control strategy. System enefits Factory characterization reduces system commissioning time Pressureindependent valves avoid rebalancing costs o flow sensors to maintain High turndown ratios contribute to reducing energy costs Flexibility to handle space configuration changes PRODUCT MODELS Three venturi valve options are available in the Traccel family: PRODUCT TraccelTP (Tracking Pair VAV) TraccelTX (Enhanced Tracking Pair VAV) TraccelSO (Supplyonly VAV) DESCRIPTIO To meet the need of directional airflow, TraccelTP features tracking valve pairs that maintain a prescribed CFM offset to enable accurate space pressurization and complete room climate control. For tracking pair applications in demanding spaces, TraccelTX provides extra I/O to meet the needs of humidity control and pressure monitoring, plus optional shutoff capability for decontamination procedures. In VAV applications where ducted exhaust is sufficient to meet local codes and engineering guidelines, TraccelSO provides a costeffective supply valve when no tracking exhaust valve is required. Tracking Exhaust Valve (optional shutoff) Pressure Monitor SPECIFICATIOS Exhaust duct Supply Valve (optional shutoff) Supply duct The TraccelTX valve can maintain a positive, negative, or neutral directional airflow with variable air volume (VAV) temperature and humidity control. More room control applications are described on page 4. Construction (includes A and S valve designs) 16 ga. spun aluminum valve body with continuous welded seam Aluminum valve bodies available as uncoated aluminum or with corrosionresistant baked phenolic coatings Composite Teflon shaft bearings Spring grade stainless steel spring and PPS slider assembly Supply valves insulated with 3/8"(9.5 mm) flexible closedcell polyethylene. Flame/smoke rating 25/50. Density is 2 lb/ft 3 (32 kg/m 3 ) Construction, Lowleakage (L valve designs) (Save as above with the following added) Cone gasket material: Class A: eoprene Class : Viton Seal wheel material: Polypropylene Operating Range F (050 C) ambient 1090% noncondensing RH (Specifications continued on page 2) TALE OF COTETS Product Models... 1 Specifications... 1 Features... 3 Available Inputs and Outputs... 3 Applications... 3 Ordering Guide... 5 Shutoff Leakage Performance... 6 Wiring... 9 Points LonMark Objects and etwork Variables Maintenance T H 75 Discovery Way Acton, Massachusetts Telephone (978) Fax (978) Phoenix Controls Corporation. Specifications subject to change without notice. Rev. 5/09 MKT0041 MPC1368 TRACCEL VALVES: LOMARK CERTIFIED 1 OF 19

2 SPECIFICATIOS (COTIUED) Performance Pressure independent over a 0.3"3.0" WC (74747 Pa) drop across valve Volume control accurate to ±5% of airflow command signal o additional straight duct runs needed before or after valve Available in flows from 3510,000 CFM (5916,990 m 3 /hr) Response time to change in command signal: <1 minute Sound Designed for low sound power levels to meet or exceed ASHRAE noise guidelines Traccel Valves Power: 24 Vac 50/60 Hz Power consumption (using proportional reheat control): Single 8", 10", and 12": 13 VA Single 14": 20 VA Dual 10", 12", 14": 20 VA Power consumption (using floating point reheat control): Single 8", 10", and 12": 20 VA Single 14": 26 VA Dual 10", 12", and 14": 26 VA Input accuracy: Voltage, current, resistance: ±1% full scale Output accuracy: 0 to 10 Vdc: ±1% full scale into 10 KΩ minimum 4 to 20 ma: ±1% full scale into 500 Ω 0/50 Ω Interoperability: ased on LOWORKS technology for peertopeer communication between room controllers LonMark certified according to the Interoperability Guidelines Version 3.4 LonMark functional profile SCCVAV #8502 Agency compliance: CE CSA FCC Part 15, Subpart J, Class A Optional IP54 Controller Protection Roomlevel communications: FTT10, 78 K, LonTalk network Teflon is a registered trademark of DuPont Co. LOWORKS is a registered trademark of Echelon Corp. LOMARK and the LOMARK Logo are managed, granted, and used by LOMARK International under a license granted by Echelon Corporation. 2 OF 19 TRACCEL VALVES: LOMARK CERTIFIED MKT0041 MPC Phoenix Controls Corporation. Specifications subject to change without notice. Rev. 5/09

3 FEATURES FEATURE TRACCEL MODEL DESCRIPTIO Pressure independence All CFM airflow maintained regardless of changes in duct static pressure. o flow sensors All Factory flow characterization eliminates the need for flow sensors. Airflow offset maintained TP, TX Supply and exhaust CFM offset settings maintain accurate pressurization. Temperature and occupancy control Humidity control and pressure monitoring TP, TX, SO TX Primary and secondary PID loops. Occupied, unoccupied or standby. uilding Management System (MS) or local set point input. AVAILALE IPUTS AD OUTPUTS* (ASED O TRACCEL OARD) Humidity monitoring and control. Pressure monitoring. MS control available. HVAC emergency modes TP, TX, SO Multiple modes available. Custom setup for each mode. Floating point reheat TP, TX, SO Control algorithm and TRIAC support for tristate hydronic reheat valves. Up to 14 Standard LO etwork Variable Types (SVT) per I/O point available to Flexible I/O TP, TX, SO read/write via LonTalk. Additional inputs/outputs (I/O) TX Two additional universal inputs (humidity, pressure). Shutoff capability TX Optional shutoff valve configuration enables room decontamination procedures. TP = Tracking pair VAV TX = Enhanced tracking pair VAV SO = Supplyonly VAV APPLICATIOS TYPE DESCRIPTIO Universal input UI 1 Dry contact (<100 Ω = Closed, >100 KΩ = Open), Vdc, 420 ma, Thermistor TC2 and 3 (resistance 010 KΩ) Universal input UI 2 Same as UI 1 Universal input UI 3 Same as UI 1 Universal input UI 4** (TX Only) Same as UI 1; for humidity sensor or spare Universal input UI 5** (TX Only) Same as UI 1; for Active Pressure Monitor (APM) pressure sensor or spare Digital input DI 1 Dry contact (<100 Ω = Closed, >100 KΩ = Open); logic level (<0.7 Vdc = OFF, >1.4 Vdc = O) Analog output AO Vdc, 420 ma Analog output AO 2 Same as AO1 Digital output DO Type C, 1 Vac/Vdc TRIAC 1 Main valve control TRIAC to control main lowspeed actuator TRIAC 2 Tracking valve control TRIAC to control tracking lowspeed actuator TRIAC 3 Floating point reheat control TRIAC to control 24 Vac floating point actuator for reheat valve; 6 VA 24 Vac * The flow tracking function does not use any of the inputs or outputs above. For more details, see the wiring diagrams on pages 810. ** Available only on TraccelTX. Pressure Independence Phoenix Controls venturi valves use a simple mechanical regulator to compensate for the changes in static pressure, so accurate flow control is assured at all times. Unlike commercial controls that use velocity pressure sensors mounted in the airstream, venturi valves are impervious to dust, dirt and sensor drift. Phoenix Controls valves continue to work even in the event of a power failure, assuring that the correct room pressurization and directional airflow are maintained at all times. Unique 48point flow characterization curves for the supply and exhaust valves serving the room are downloaded to every Traccel controller s onboard microprocessor before the valves leave the factory. The controller uses this flow data to accurately control flowtracking between the two valves, virtually eliminating field calibration and rebalancing Phoenix Controls Corporation. Specifications subject to change without notice. Rev. 5/09 MKT0041 MPC1368 TRACCEL VALVES: LOMARK CERTIFIED 3 OF 19

4 APPLICATIOS (COTIUED) TraccelTP VAV tracking pair Temperature control flexibility with multiple cooling zones Supply T Office Area Tracking Exhaust Valve T Supply Duct Supply Valves T Lab Area Sometimes in larger spaces, temperature gradients vary within the space. In these applications, multiple temperature zones can be used to provide local cooling where needed. In these applications, Traccel Controllers work together to sum the total supply volume for three temperature zones and modulate one exhaust valve to maintain correct directional airflow. Exhaust Corridor Roomlevel network Signal and actuator wiring Traccel TX Enhanced VAV tracking pair Life Science applications Exhaust Duct Phoenix Controls ShutOff Valve (EO) iosafety Cabinet (not in use) Tracking Exhaust Valve Supply Valve T Traccel Room Controller Supply Duct In this example, a Phoenix Controls Shutoff Valve is used to isolate the SC exhaust flow when it is not in use. The Shutoff Valve communicates over the room level network with the Traccel Room Controller, which compensates for the change in flow to maintain room airflow balance and ensures correct directional airflow into or out of the room. Roomlevel network Signal and actuator wiring TraccelSO VAV office space adjacent to open lab Standalone supply with ducted return This office space has a standalone TraccelSO valve on the supply side and a ducted return on the exhaust side. The TraccelSO valve can have an associated temperature sensor and control a hot water valve. An optional temperature sensor can be placed in the ductwork to monitor duct temperature either on the supply or exhaust side. 4 OF 19 TRACCEL VALVES: LOMARK CERTIFIED MKT0041 MPC Phoenix Controls Corporation. Specifications subject to change without notice. Rev. 5/09

5 ORDERIG GUIDE TSV A M A L E H P VALVE FAMILY TSV = Supply valve with insulation TEV = Exhaust valve VALVE COSTRUCTIO A = ody and cone uncoated aluminum; shaft uncoated 316 stainless steel = ody and cone phenolic coating, PFA coated stainless steel shaft UMER OF VALVE ODIES F = One valve body with welded circular flange (single flanged) 1 = One valve body (single, no flange) 2 = Two valve bodies (dual, 10", 12" and 14" only) VALVE SIZE 08 = 8" valve (7.88"/200 mm actual diameter) 10 = 10" valve (9.88"/251 mm actual diameter) 12 = 12" valve (11.88"/302 mm actual diameter) 14 = 14" valve (13.88"/356 mm actual diameter) FLOW/PRESSURE OPERATIG RAGE (see Tables 1 and 2) TALE 1 FLOW/PRESSURE OPERATIG RAGE FOR VALVE DESIG A Operating Range Designation Size in CFM (m³/hr) Pressure Drop Single Dual Across Valve 08" (591189) " (851699) ( ) M = Medium pressure " WC 12" 14" ( Pa) ( ) ( ) ( ) ( ) 08" (59850) L = Low pressure " WC 10" (85934) ( ) (75750 Pa) 12" ( ) ( ) 14" ( ) ( ) VALVE OPTIOS (As required; list alphabetically, then numerically) = Square flanges on each end of single body valves F = Single square flange mounted on either: Inlet of single body exhaust valves or Discharge of single body supply valves P = Pressure switch (see note 1) R = Remote electronics U = Insulation blocks only, no insulation V = Exhaust valve insulation blocks and insulation FAIL SAFE POSITIO = Supply valve fail in place M = Exhaust valve fail in place VALVE ORIETATIO H = Horizontal U = Vertical upflow D = Vertical downflow VALVE COTROLLER DESIGATIO E = TraccelTP Supply X = TraccelTX Supply O = TraccelSO Supply = o controller (exhaust valves) COTROL TYPE L = Low speed electric actuation I = Low speed IP54 actuation VALVE DESIG A = Conical shape diffuser (see Table 1) S = Shutoff Valve body (see Table 2) L = Lowleakage valve body (see Table 2) TALE 2 FLOW/PRESSURE OPERATIG RAGE FOR SHUTOFF VALVE DESIGS S AD L Operating Range in CFM (m3/hr) Pressure Drop Designation Size Single Dual Across Valve 08" (601019) M = Medium pressure " WC 10" (851444) ( ) ( Pa) 12" 14" ( ) ( ) ( ) ( ) 08" (60680) L = Low pressure 10" 12" 14" (85765) ( ) ( ) ( ) ( ) ( ) " WC (75750 Pa) OTES: 1. Pressure switch set point for medium pressure = 0.3" WC (75 Pa). Low pressure = 0.2" WC (50 Pa) Phoenix Controls Corporation. Specifications subject to change without notice. Rev. 5/09 MKT0041 MPC1368 TRACCEL VALVES: LOMARK CERTIFIED 5 OF 19

6 ORDERIG GUIDE (COTIUED) Traccel lowspeed Shutoff Valves are available in two designs: Standard (option S) and low leakage (option L). The shutoff can be initiated either locally through a universal input (UI) from the building management system (MS) or remotely from a Local Display Unit (LDU200). SHUTOFF LEAKAGE PERFORMACE In these graphs, the term, shutoff leakage, refers to the expected airflow through the valve in the shutoff position. The term, casing leakage, refers to the expected airflow through the penetrations of the valve body. otes: Leakage data has been provided for pressures of 5", 10" and 30". These pressures are for reference only and were recorded during leak rate testing. For details, see the graphs below. The system pressure for valve operation is specified in the Ordering Guide, Flow/Pressure Operating Range Table, 0.6" 3.0" WC on page 4. Graph 1. Shut Off Leakage Standard Shutoff Valve (Option S) Standard Shutoff Valve (Option S) Single Valve Shut Off Leakage* Static Pressure (Pa) Leakeage (CFM) Leakage (L/s) Static Pressure (in WC) OTE: Leakage rates shown in this graph are for all four valve sizes: 8, 10, 12, and 14inch. 6 OF 19 TRACCEL VALVES: LOMARK CERTIFIED MKT0041 MPC Phoenix Controls Corporation. Specifications subject to change without notice. Rev. 5/09

7 Graph 2. Casing Leakage Standard Shutoff Valve (Option S) Single Valve Casing Leakage Static Pressure (Pa) Leakage (CFM) Leakage (L/s) Static Pressure (in wc) OTE: Leakage rates shown in this graph are for all four valve sizes: 8, 10, 12, and 14inch. Graph 1. Shutoff Leakage Low Leakage Shutoff Valve (Option L) Low Leakage Shutoff Valve (Option L) Single Valve Shut Off Leakage Static Pressure (pascals) Leakage (CFM) Leakage (L/sec) Static Pressure (inches WC) 8" Shutoff 10" Shutoff 12" Shutoff 14 Shutoff ot Shown 2009 Phoenix Controls Corporation. Specifications subject to change without notice. Rev. 5/09 MKT0041 MPC1368 TRACCEL VALVES: LOMARK CERTIFIED 7 OF 19

8 SHUTOFF LEAKAGE PERFORMACE (COTIUED) Graph 2. Casing Leakage Low Leakage Shutoff Valve (Option L) Single Valve Casing Leakage Static Pressure (Pascal) Leakage (CFM/ft2 of surface area) Leakage (L/sec) /m2 of surface area) Static Pressure (inches WC) Calculating Valve Area (Applies to Low Leakage Valve Option L Only) Use the following valve areas to convert casing leakage per square area to a standard leakage rate (CFM and L/sec). Valve Areas Valve Size OTE: Leakage rates shown in this graph are for all three low leakage sizes: 8, 10, and 12inch. A 14inch low leakage valve is not available at this time. Exceeds Eurovent Class A,, C and D specifications. (Eurovent Committee of Air Handling and Equipment Manufacturers) Area (ft 2 ) Area (m 2 ) 8" " " Recommended Valve Class for Decontamination Agents Gaseous Decontamination Agent Hydrogen peroxide vapor Ethylene oxide Ammonium chloride Chlorine dioxide Paraformaldehyde Recommended Valve Class* Class A Class Class A Class A** Class A otes: * Chemical resistance data acquired from Compass Corrosion Guide. ** For concentrations up to 800 ppm. To achieve higher concentrations during decontamination, use Class valves. 8 OF 19 TRACCEL VALVES: LOMARK CERTIFIED MKT0041 MPC Phoenix Controls Corporation. Specifications subject to change without notice. Rev. 5/09

9 WIRIG (See submittal wiring diagram for projectspecific details.) TraccelTP Main Valve T7 CW Main Valve Floating Point Reheat Valve 3c by others Tracking Valve L1 L2 GD ET A ET T4 T6 S3 S4 T5 T3 CW CW (MAI) (TRK) R G P.S. R G P.S. (MAI) (TRK) 24 Vac Power Twisted pair I/O Connections for field devices UI1 UI2 UI3 DI1 DO1 AO1 AO2 O C L1 L2 GD A T1 T2 T4 T6 T7 T5 T3 CW CW CW P S G R P S G R 3c by others (see note below) 3 or 5c by others (see note below) cw OTE: Maximum cable length 50 feet, 22 AWG PS G R Optional T1 S1 S2 S5 T2 FTT10 Channel UI 1 UI 2 UI 3 DI 1 O COM C DO 1 AO 1 AO 2 Jumper Configuration for AO1 and AO2 Jumper Configuration for UI 1, 2 and 3 (S1, S2, S3) TraccelTP Tracking Valve Factory Wiring Voltage Current Voltage Current Resistance/ Contact/ Thermistor R G PS CW Field Wiring Euro Style lock Potentiometer, actuator and pressure switch wiring TERMIAL LOCKS Terminal lock Typical Function o. of Terminations T1 Input connections 8 T2 Output connections 7 T3 Main and tracking valve pot and pressure switch 10 T4 Power (24 Vac input) 3 T5 Main and tracking lowspeed electric actuators 6 T6 Communication (FTT10) 2 T7 Floating point actuator on reheat valve Phoenix Controls Corporation. Specifications subject to change without notice. Rev. 5/09 MKT0041 MPC1368 TRACCEL VALVES: LOMARK CERTIFIED 9 OF 19

10 WIRIG (COTIUED) (See submittal wiring diagram for projectspecific details.) TraccelTX Main Valve L1 L2 GD ET A ET T4 T6 S7 S3 S6 S4 T3 T8 T5 T7 CW CW (MAI) (TRK) CW R G P.S. R G P.S. (MAI) (TRK) UI 5 UI 4 Twisted pair 24 Vac Power I/O Connections for field devices UI1 UI2 UI3 DI1 DO1 AO1 AO2 O C L1 L2 GD A Main Valve T1 T2 T4 T6 T8 T7 T5 T3 CW CW CW P S G R P S G R UI4 UI5 Floating Point Reheat Valve 3c by others 3c by others (see note below) 3 or 5c by others (see note below) Tracking Valve S1 S2 cw OTE: Maximum cable length 150 feet, 22 AWG PS G R Optional T1 S5 T2 FTT10 Channel UI 1 UI 2 UI 3 DI 1 O COM C DO 1 AO 1 AO 2 Jumper Configuration for AO1 and AO2 Jumper Configuration for UI 1, 2, 3, 4 and 5 (S1, S2, S3, S6, S7) TraccelTX Tracking Valve Factory Wiring R G PS CW Field Wiring Euro Style lock Potentiometer, actuator and pressure switch wiring TERMIAL LOCKS Terminal lock Voltage Current Typical Function Voltage Current Resistance/ Contact/ Thermistor o. of Terminations T1 Input connections 8 T2 Output connections 7 T3 Main and tracking valve pot and pressure switch 10 T4 Power (24 Vac input) 3 T5 Main and tracking lowspeed electric actuators 6 T6 Communication (FTT10) 2 T7 Floating point actuator on reheat valve 3 T8 Additional input connections 4 10 OF 19 TRACCEL VALVES: LOMARK CERTIFIED MKT0041 MPC Phoenix Controls Corporation. Specifications subject to change without notice. Rev. 5/09

11 WIRIG (COTIUED) (See submittal wiring diagram for projectspecific details.) TraccelSO Main Valve T7 CW Main Valve Floating Point Reheat Valve 3c by others L1 L2 GD T4 T5 (MAI) CW I/O Connections for field devices UI1 UI2 UI3 DI1 DO1 AO1 AO2 O C T1 T2 T7 T5 CW CW 24 Vac Power ET A ET T6 T3 R G P S (MAI) Twisted pair L1 L2 GD T4 P S S1 S2 S3 S4 S5 A T6 T3 G R T1 UI 1 UI 2 UI 3 DI 1 O COM C DO 1 AO 1 AO 2 T2 FTT10 Channel OTE: Maximum cable length 150 feet, 22 AWG Jumper Configuration for AO1 and AO2 Jumper Configuration for UI 1, 2 and 3 (S1, S2, S3) Voltage Current Voltage Current Resistance/ Contact/ Thermistor TERMIAL LOCKS Terminal lock Typical Function o. of Terminations T1 Input connections 8 T2 Output connections 7 T3 Main and tracking valve pot and pressure switch 5 T4 Power (24 Vac input) 3 T5 Main and tracking lowspeed electric actuators 3 T6 Communication (FTT10) 2 T7 Floating point actuator on reheat valve Phoenix Controls Corporation. Specifications subject to change without notice. Rev. 5/09 MKT0041 MPC1368 TRACCEL VALVES: LOMARK CERTIFIED 11 OF 19

12 WIRIG (COTIUED) (See submittal wiring diagram for projectspecific details.) Transformers The Traccel Valve Controller requires the use of a stepdown transformer (either 120/24 volt or 240/24 volt). Any transformer used to power these valve controllers must meet the requirements of an EC Class 2 circuit. The secondary transformer must be limited to a maximum of 30 Vac. Secondary power shall be current limited with either internal circuit breaker protection or with a fouramp slow blow fuse, in accordance with EC Class 2 power requirements. Phoenix Controls offers the following recommendations; however, designers, installers and owners should always consult their national and local electrical codes before selecting transformers for their systems. Transformers should not exceed 100 VA. Use multiple transformers, rather than larger transformers, when more than 100 VA is required. Each pressurization zone should have either a dedicated singlephase primary circuit or a secondary circuit disconnect. If an earth ground is provided, it should not be connected to the valve controllers, even though there is a threeterminal connector on the control board. OTE: AC line voltage polarity must be maintained on all valve controllers and AC powered ancillary devices. Transformer Sizing To size a transformer, all of the VA loads for the circuit must be totaled. This table outlines the power ratings of Traccel products and related outside purchased equipment. Use these values to size the power transformers for the Traccel system. Traccel Valve Controller Control type L (lowspeed electric) Single valve body 13 VA Dual valve body 17 VA External Devices Router/repeater modules 2 VA Sensor Approved thermistor 0 VA Heating valve elimo LM24 (2state) 3 VA Heating valve elimo LM24SR (propor) 4 VA Each 420 ma device Example: transducers 0.5 VA Power Conductor Sizing For lowspeed valves in a bus configuration: As a rule of thumb for loads up to 100 VA, use 18 AWG cable with a maximum length of 110 feet (33 meters) between the transformer and the last daisychained device. For a more exact length per load number, refer to this chart. Maximum wire length (in feet) given a wire gauge and VA delivery by transformer VA Delivered Wire Gauge 14 AWG 16 AWG 18 AWG 20 AWG 22 AWG OF 19 TRACCEL VALVES: LOMARK CERTIFIED MKT0041 MPC Phoenix Controls Corporation. Specifications subject to change without notice. Rev. 5/09

13 WIRIG (COTIUED) (See submittal wiring diagram for projectspecific details.) etwork Wiring Roomlevel etwork Echelon Corporation has tested and approved 5 cables types for use with the FTT10 communications transceiver. ased on availability, cost and maximum distance limitations, we have focused our recommendation on two cable types: Generic EMA level 4 cable, 22 AWG (0.65 mm) (see note below) elden AWG (1.3 mm) cable, (or equivalent) OTE: Level 4 cable specified by Echelon as originally defined by the EMA differs from the Category 4 specification proposed by the Electronic Industries Association/Telecommunication Industry Association (EIA/TIA). The cables Phoenix Controls recommends are twoconductor, twistedpair (TP) without a shield. A shield, or drain wire, is not required for Traccel communications wiring and should not be used. oth of these cables are available from multiple sources either solid or stranded, in plenum and nonplenum rated versions. If two conductors are to be placed in a terminal opening, twist the bare conductors prior to inserting these in the terminal opening. If a wallmounted sensor with a communications jack is used, the connections to the jack must be treated as either a bus connection or an EOL connection. While the roomlevel communications wiring is not polarity sensitive, it is recommended that a consistent colorcoding and polarity convention be followed. Each terminal on the terminal block will accommodate up to two 16 AWG (1.3 mm) stranded conductors. Communications connections are to be made following a bus or daisy chain topology. Two endofline (EOL) terminators must be installed, one at each end of the roomlevel network. Maximum Cable Lengths When using Level 4 cable operating in a bus topology, the maximum cable length is 4500 feet (1370 meters). When using 16 AWG cable operating in a bus topology, the maximum cable length is 8800 feet (2680 meters). Phoenix Controls Wiring Recommendations Use cables recommended by Phoenix Controls. Stranded wire is strongly recommended for ease of installation. Follow good wiring practices: Do not run the communications cable in the same conduit or wire way as the power cables. If the communications cables must cross power cables, it is best to do so at a 90degree angle. Shield or drain wires, if present, should be wrapped with insulating tape to prevent contact with exposed conductors or contacts. Maintain a consistent color code or polarity all the way through the wiring system. All connections must meet the requirements of an EC Class 2 circuit. Local and national electrical codes take precedence Phoenix Controls Corporation. Specifications subject to change without notice. Rev. 5/09 MKT0041 MPC1368 TRACCEL VALVES: LOMARK CERTIFIED 13 OF 19

14 POITS The two tables in this section contain points available for integration in a building management system (MS). Table 1 is a list of points for open LO integration and Table 2 is a list of points for integration through the Phoenix Controls family of servers. Table 1. Points for Open LO Integration Description Object Type Object ame etwork Variable Type (SVT) etwork Variable (V) ame Space temperature sensor input 8502 SCC VAV SVT_temp_p nvispacetemp Occupied temperature set point input 8502 SCC VAV SVT_temp_p nvitempsetpt Occupied override input 8502 SCC VAV SVT_occupancy nvioccoverride Occupancy sensor override 8502 SCC VAV SVT_occupancy nvioccsensor Application mode command input 8502 SCC VAV SVT_hvac_mode nviapplicmode Unoccupied cooling temperature set point 8502 SCC VAV SVT_temp_p nviunocccoolstpt Unoccupied heating temperature set point 8502 SCC VAV SVT_temp_p nviunoccheatstpt Auxiliary temperature set point input 8502 SCC VAV SVT_temp_p nviauxtempsetpt Local temperature set point lever enable/scaling input 8502 SCC VAV SVT_switch nvilclleverebl Space relative humidity sensor input 8502 SCC VAV SVT_lev_percent nvispacerh Space relative humidity set point input 8502 SCC VAV SVT_lev_percent nvirhsetpt Effective space temperature output 8502 SCC VAV SVT_temp_p nvospacetemp Unit HVAC status output 8502 SCC VAV SVT_hvac_status nvounitstatus Effective space temperature set point output 8502 SCC VAV SVT_temp_p nvoefftempsetpt Effective occupancy mode status output 8502 SCC VAV SVT_occupancy nvoeffoccmode Discharge air temperature output 8502 SCC VAV SVT_temp_p nvodischairtemp Terminal load output 8502 SCC VAV SVT_lev_percent nvoterminalload Auxiliary temperature control loop command output 8502 SCC VAV SVT_switch nvoauxtempcmd Effective space relative humidity output 8502 SCC VAV SVT_lev_percent nvospacerh Effective space relative humidity set point output 8502 SCC VAV SVT_lev_percent nvoeffrhsetpt Space humidity control command output 8502 SCC VAV SVT_lev_percent nvorhctrlcmd MS zone flow offset set point input SCC VAV FLOW SVT_flow_f nviflowoffsetcmd MS minimum supply flow set point input SCC VAV FLOW ST_flow nviminsupflowcmd MS HVAC flow override command input SCC VAV FLOW SVT_hvac_overid nviflowoverride MS HVAC emergency override input SCC VAV FLOW SVT_hvac_emerg nvihvacemergcmd IAQ command input SCC VAV FLOW SVT_lev_percent nvilaqcmd Additional flow #1 input SCC VAV FLOW SVT_flow nviflow_1 Additional flow #2 input SCC VAV FLOW SVT_flow nviflow_2 Zone total supply flow output SCC VAV FLOW SVT_flow nvototalsupflow Zone total exhaust flow output SCC VAV FLOW SVT_flow nvototalexhflow Zone volumetric offset feedback output SCC VAV FLOW SVT_flow_f nvoflowoffset Effective zone volumetric offset set point output SCC VAV FLOW SVT_flow_f svoeffflwoffstsp Supply valve flow feedback output SCC VAV FLOW SVT_flow nvomainvalveflow Exhaust valve flow feedback output SCC VAV FLOW SVT_flow nvotrkvalveflow Effective supply valve flow set point output SCC VAV FLOW SVT_flow nvoeffmainflowsp Effective exhaust valve flow set point output SCC VAV FLOW SVT_flow nvoefftrkflowsp Space relative pressure output SCC VAV FLOW SVT_press_p nvopressure MS AO port 1 override input TrcDevice SVT_switch nviaocmd_1 MS AO port 2 override input TrcDevice SVT_switch nviaocmd_2 MS DO port override input TrcDevice SVT_switch nvidocmd MS floating point drive override input TrcDevice SVT_switch nvifloatdrivecmd Current alarm status of all alarm bits output TrcDevice SVT_state_64 nvoalarmstate Universal input port 1 feedback output TrcDevice SVT_count_inc nvoui_1 Universal input port 2 feedback output TrcDevice SVT_count_inc nvoui_2 Universal input port 3 feedback output TrcDevice SVT_count_inc nvoui_3 Universal input port 4 feedback output TrcDevice SVT_count_inc nvoui_4 Universal input port 5 feedback output TrcDevice SVT_count_inc nvoui_5 Digital input port feedback output TrcDevice SVT_count_inc nvodi 14 OF 19 TRACCEL VALVES: LOMARK CERTIFIED MKT0041 MPC Phoenix Controls Corporation. Specifications subject to change without notice. Rev. 5/09

15 POITS (COTIUED) Table 2. Points for Integration through the Traccel Family of Servers Description etwork Variable Type (SVT/UVT) etwork Variable (V) ame Field ame Occupied temperature set point input SVT_temp_p nvitempsetpt nvitempsetpt Occupancy override input SVT_occupancy nvioccoverride nvioccoverride Application mode command input SVT_hvac_mode nviapplicmode nviapplicmode Unoccupied cooling temperature set point SVT_temp_p nviunocccoolstpt nviunocccoolstpt Unoccupied heating temperature set point SVT_temp_p nviunoccheatstpt nviunoccheatstpt Auxiliary temperature set point input SVT_temp_p nviauxtempsetpt nviauxtempsetpt Local temperature set point lever scaling input SVT_switch.value nvilclleverebl value Local temperature set point lever enable input SVT_switch.state nvilclleverebl state Space relative humidity set point input* SVT_lev_percent nvirhsetpt nvirhsetpt Effective space temperature output SVT_temp_p nvosccdata SpaceTemp Phoenix temperature mode status output PHX_TEMP_MODE nvosccdata PccTempMode HVAC mode status output SVT_hvac_mode nvosccdata HvacTempMode Effective space temperature set point output SVT_temp_p nvosccdata EffSpaceTempSP Effective auxiliary temperature set point output SVT_temp_p nvosccdata EffAuxTempSP Effective occupancy mode status output SVT_temp_p nvotpflowdata EffOccMode Discharge air temperature output SVT_temp_p nvosccdata DschrgAirTemp Exhaust air temperature output SVT_lev_percent nvosccdata ExhaustAirTemp Primary temperature loop cooling command output SVT_lev_percent nvosccdata PrimaryCoolCmd Primary temperature loop heating command output SVT_lev_percent nvosccdata PrimaryHeatCmd Auxiliary temperature control loop command output SVT_switch.value nvosccdata AuxTempCmd.value Auxiliary temperature control loop status (O/OFF) SVT_switch.state nvosccdata AuxTempCmd.state Effective space relative humidity output SVT_lev_percent nvosccdata SpaceRH Effective space relative humidity set point output* SVT_lev_percent nvosccdata EffSpaceRHSetpt Space humidity control command output* SVT_lev_percent nvosccdata HumidifyCmd Space dehumidity control command output* SVT_lev_percent nvosccdata DehumidifyCmd MS zone flow offset set point input SVT_flow_f nviflowoffsetcmd nviflowoffsetcmd MS minimum supply flow set point input ST_flow nviminsupflowcmd nviminsupflowcmd MS HVAC flow override command input SVT_hvac_overid nviflowoverride nviflowoverride MS HVAC emergency override input SVT_hvac_emerg nvihvacemergcmd nvihvacemergcmd IAQ command input SVT_lev_percent nvilaqcmd nvilaqcmd Zone total supply flow output SVT_flow nvotpflowdata uwtotalsup Zone total exhaust flow output SVT_flow nvotpflowdata uwtotalexh Zone volumetric offset feedback output SVT_flow_f nvotpflowdata swflowoffset Effective zone volumetric offset set point output SVT_flow_f nvotpflowdata sweffflowoffsetcmd Supply valve flow feedback output SVT_flow nvotpflowdata uwmainflow Exhaust valve flow feedback output SVT_flow nvotpflowdata uwtrackflow Effective supply valve flow set point output SVT_flow nvotpflowdata uweffmainflowsp Effective exhaust valve flow set point output SVT_flow nvotpflowdata uwefftrackflowsp Space relative pressure output* SVT_press_p nvopressure nvopressure MS AO port 1 override command value input SVT_switch.value nviaocmd_1 value MS AO port 1 override command state input SVT_switch.state nviaocmd_1 state MS AO port 2 override command value input SVT_switch.value nviaocmd_2 value MS AO port 2 override command state input SVT_switch.state nviaocmd_2 state MS DO port override command value input SVT_switch.value nvidocmd value MS DO port override command state input SVT_switch.state nvidocmd state MS floating point drive override command value input SVT_switch.value nvifloatdrivecmd value MS floating point drive override command state input SVT_switch.state nvifloatdrivecmd state Supply valve jam alarm output SVT_state_64 nvoalarmstate JamAlarm Supply valve flow alarm output SVT_state_64 nvoalarmstate FlowAlarm Exhaust valve jam alarm output SVT_state_64 nvoalarmstate JamAlarm2 * TX only 2009 Phoenix Controls Corporation. Specifications subject to change without notice. Rev. 5/09 MKT0041 MPC1368 TRACCEL VALVES: LOMARK CERTIFIED 15 OF 19

16 Description etwork Variable Type (SVT/UVT) etwork Variable (V) ame Field ame Exhaust valve flow alarm output SVT_state_64 nvoalarmstate FlowAlarm2 Universal input port 1 feedback output SVT_count_inc nvoui_1 nvoui_1 Universal input port 2 feedback output SVT_count_inc nvoui_2 nvoui_2 Universal input port 3 feedback output SVT_count_inc nvoui_3 nvoui_3 Universal input port 4 feedback output* SVT_count_inc nvoui_4 nvoui_4 Universal input port 5 feedback output* SVT_count_inc nvoui_5 nvoui_5 Digital input port feedback output SVT_switch nvodi nvodi Phoenix emergency mode command input UVT_Emergency nvipccemergcmd nvipccemergcmd Effective Phoenix emergency mode status output UVT_Emergency nvotpflowdata EffPccEmergMode Effective HVAC emergency mode status output SVT_hvac_emerg nvotpflowdata EffHvacEmergMode * TX only 16 OF 19 TRACCEL VALVES: LOMARK CERTIFIED MKT0041 MPC Phoenix Controls Corporation. Specifications subject to change without notice. Rev. 5/09

17 LOMARK OJECTS & ETWORK VARIALES TrcDevice Object Type nv1 nvimanoverride UVT_Man_Override nv2 nvoalarmstate SVT_state_64 nv3 nviaocmd_1 UVT_Switch nv8 nvoengdata UVT_Eng_TrcVav nv4 nviaocmd_2 UVT_Switch nv9 nvomspdata UVT_TpMsp_Data nv5 nvidocmd UVT_Switch nv10 nvolocalalarm UVT_Switch nv6 nvifloatdrivecmd UVT_Switch nv13 nvoappstatus UVT_App_Status Phoenix Defined etwork Variables nv15 nvoui_1 UVT_count_inc nv15 nvoui_2 UVT_count_inc nv15 nvoui_3 UVT_count_inc nv15 nvoui_4 UVT_count_inc nv15 nvoui_5 UVT_count_inc nv15 nvodi UVT_switch Phoenix Defined Configuration Properties ncidevicecfg nciuiconfig[3] nciaoconfig[2] ncidiconfig ncidoconfig ncilcloutcmdcfg[4] ncircvhrtt_dev ncisndhrtt_dev nciminouttm_dev UCPTlvcDeviceCfg UCPTunivInputParam UCPTanalogOutputParam UCPTdigitalInputParam UCPTdigitalOutnputParam UCPTlclOutCmdCfg SCPTmaxRcvTime SCPTmaxSendTime SCPTminSendTime PccEmergency Object Type nv1 nvipccemergcmd UVT_Emergency Phoenix Defined etwork Variables nv2 nvoeffpccemerg UVT_Emergency Phoenix Defined nciemergcfg UCPTemergCtrlCfg 2009 Phoenix Controls Corporation. Specifications subject to change without notice. Rev. 5/09 MKT0041 MPC1368 TRACCEL VALVES: LOMARK CERTIFIED 17 OF 19

18 LOMARK OJECTS & ETWORK VARIALES (COTIUED) SCCVAV Object Type 8502 nv1 nvispacetemp SVT_temp_p Mandatory etwork Variables nv26 nv27 nvospacetemp SVT_temp_p nvounitstatus SVT_hvac_status nv2 nvitempsetpt SVT_temp_p nv28 nvoefftempsetpt SVT_temp_p nv6 nvioccoverride SVT_occupancy nv29 nvoeffoccmode SVT_occupancy nv7 nvioccsensor SVT_occupancy nv34 nvodischairtemp SVT_temp_p nv8 nv20 nviapplicmode SVT_hvac_mode nvispacerh SVT_lev_percent Optional etwork Variables nv37 nv43 nvoterminalload SVT_lev_percent nvospacerh SVT_lev_percent Configuration Properties ncisndhrtt_vav ncisetpoints Mandatory SCPTmaxSendTime SCPTsetPnts ncircvhrtt_vav nciminouttm_vav Optional SCPTmaxRcvTime SCPTminSendTime nv81 nviunocccoolstpt SVT_temp_p nv85 nvoauxtempcmd SVT_switch nv82 nviunoccheatstpt SVT_temp_p nv87 nvosccdata UVT_Scc_Data nv83 nviauxtempsetpt SVT_temp_p Phoenix Defined etwork Variables nv92 nvoeffrhsetpt SVT_lev_percent nv84 nvilclleverebl SVT_switch nv93 nvorhctrlcmd SVT_lev_percent nv91 nvirhsetpt SVT_lev_percent Phoenix Defined Configuration Properties ncisccvavcfg nciauxtempsetpt ncifltptctrlcfg ncitemppidparam[3] ncirhcfg ncirhpidparam[2] UCPTsccVavCfg UCPTauxTempSetpt UCPTFltPtCtrlCfg UCPTpidParam1 UCPTsccRHCfg UCPTpidParamRH 18 OF 19 TRACCEL VALVES: LOMARK CERTIFIED MKT0041 MPC Phoenix Controls Corporation. Specifications subject to change without notice. Rev. 5/09

19 LOMARK OJECTS & ETWORK VARIALES (COTIUED) SccVavFlow Object Type nv1 nviflowoffsetcmd SVT_flow_f nv6 nvototalsupflow SVT_flow nv2 nviminsupflowcmd SVT_flow nv7 nvototalexhflow SVT_flow nv3 nviflowoverride SVT_hvac_overid nv8 nvoflowoffet SVT_flow_f nv4 nvihvacemergcmd SVT_hvac_emerg nv9 nvoeffflwoffstsp SVT_flow_f nv5 nviiaqdmd SVT_lev_percent nv10 nvomainvalveflow SVT_flow nv19 nv20 nviiflow_1 SVT_flow nviiflow_2 SVT_flow Phoenix Defined etwork Variables nv11 nv12 nvotrkvavleflow SVT_flow nvoeffmainflowsp SVT_flow nv13 nvoefftrkflowsp SVT_flow nv16 nvototalsysflows UVT_Sys_Flows nv17 nvotpflowdata UVT_TpFlowData nv18 nvopressure SVT_press_p Phoenix Defined Configuration Properties ncitpflowcfg ncizonesetpoints ncivalveparam[2] ncircvhrtt_flw nvisndhrtt_flw nciminouttm_flw UCPTvavFlowCfg UCPTzoneSetpoints UCPTvalveParam SCPTmaxRcvTime SCPTMaxSendTime SCPTminSendTime MAITEACE Traccel valves require no ongoing preventive maintenance. Once the field engineer has completed the field startup, the valves will provide years of continuous operation. FCC COMPLIACE FOR DIGITAL VALVES WARIG: Changes or modifications to this unit not expressly approved by the party responsible for compliance (Phoenix Controls) could void the user s authority to operate the equipment. OTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual (Phoenix Controls product data sheets and wiring diagrams), may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense Phoenix Controls Corporation. Specifications subject to change without notice. Rev. 5/09 MKT0041 MPC1368 TRACCEL VALVES: LOMARK CERTIFIED 19 OF 19