Chemical Dosing Equipment

Transcription

1 76

2 Chemical Dosing Equipment Page PERISTALTIC DOSING PUMPS SIMPOOL POOLT SIMPOOL TIMER SIMPOOL PH SIMPOOL RX TECHNOPOOL TT TECHNOPOOL PHRX TECHNOPOOL SOLENOID DRIVEN DOSING PUMPS HC0 HC PH HC RX HC97 HC997 PIMACLK HC999 PIMACLK HC00 PH HC00 RX HC PREASSEMBLED PANELS ATECHNOPOOL SYSTEM PHRX APOOL SYSTEM PHRX APOOL SYSTEM PHCL APOOL SYSTEM PHCLJ APOOL TOP EVO PHCL APOOL TOP EVO PHCLJ CONTROLLERS AND ANALYSERS ADIN START AR0 START AE START SPARE PARTS AND ACCESSORIES TANKS, SAFETY TANKS MANUAL AND MOTOR MIXERS SUCTION LANCES PREASSEMBLED SKID BRACKETS, KITS, LEVEL PROBES PROBES AND BUFFER SOLUTIONS PROBE HOLDER ACCESSORIES AND PANELS PULSE EMITTER WATER METER ACON FLOATING DISPENSERS 7 CHLORINE FEEDER 77

3 Chemical Dosing Equipment PERISTALTIC DOSING PUMPS SIMPOOL POOLT Context of use: For private pools with a volume up to 00 cu. m, to dose chlorine or other liquid disinfectants upon activation of the recirculation pump. Description: Digital peristaltic pump for dosing chemicals for pools (chlorine, Hydrogen peroxide, flocculant, antialgae). Relay or cycle mode programmable functioning. Inhibit input with specific cable to activate and allow the dosing (to be connected to ricirculation pump). The pump comes with kit and accessories for a correct installation (collar excluded). Technical features: Power supply: standard 0 VAC Absorption: WATT (max) Level inputs: standard INHIBIT inputs: 0 VAC to activate and allow the dosing (circulation pump) Switch: on/off/prime Standards: No. 004/0/CE EMC directive No. 006/9/CE "DBT low voltage directive" No. 0/6/UE, 00/96/CE "RoHS and WEEE directives" 0x46 mm INSTALLATION KIT INSTALLATION EXAMPLE Wall fixing bracket ADSP0000 Foot filter ADSP Tubo in PVC Ø, 4m ADSP6000 G½" Duckbill injection valve ADSP Wall plugs and screws ADSP POWER FLOW RATE PRESSURE WATT PIPE I/h bar ADD9V VAC.4 0 SANTOPRENE. 0.0 ADD VAC 0 SANTOPRENE

4 SIMPOOL TIMER Context of use: For private pools with a volume up to 00 cu. m, for timed dosing of chlorine or other liquid disinfectants with builtin timer Description: Digital peristaltic pump with inbuilt timer for dosing chemicals for pools, with daily and weekly programmable dosing. Ideal for the dosing of chlorine, hydrogen peroxide, flocculant and antialgae. Inhibit input to allow the dosing (which can be deactivated if required) The pump comes with kit and accessories for a correct installation (collar excluded). Technical features: Power supply: standard 0 VAC Absorption: WATT (max) Level inputs: standard INHIBIT inputs: 0 VAC to activate and allow the dosing (circulation pump) Switch: on/off/prime Standards: No. 004/0/CE EMC directive No. 006/9/CE "DBT low voltage directive" No. 0/6/UE, 00/96/CE "RoHS and WEEE directives" 0x46 mm INSTALLATION EXAMPLE INSTALLATION KIT Wall fixing bracket ADSP0000 Foot filter ADSP Tubo in PVC Ø, 4m ADSP6000 G½" Duckbill injection valve ADSP Wall plugs and screws ADSP POWER FLOW RATE PRESSURE WATT PIPE I/h bar ADDV4000C VAC.4 0 SANTOPRENE. 0.0 ADD00000C VAC 0 SANTOPRENE

5 Chemical Dosing Equipment SIMPOOL PH + ph ) Kit) Context of use: For private pools up to 00 cu. m for dosing the acid or alkaline corrector with the builtin ph tool. Description: Digital peristaltic pump with builtin ph instrument Easy, precise and flexible use. Digital display switched on even without circulation flow, flow presence/absence control through a connection to the recirculation pump (Inhibit). Level probe compatible. The kit includes: ph electrode, 4 m suction/injection pipe, ph buffer solutions to calibrate the electrode, wall fixing bracket and dowels, in electrode holder collar and product injection suitable for DN06 ADPSTC pipes, foot filter. Upon request, the temperaturereading compatible version is available (temperature probe not included). Technical features: Power supply: standard 0 VAC WATT (max) Level inputs: standard INHIBIT inputs: 0 VAC to activate and allow the dosing (circulation pump) Switch: on/off/prime LIGHT model Range 04 ph (Adjisutable range alarm) Pause mode PRO model Reduced Range 9pH (specific for Swimming Pool use) Temperature probe connection* Range/Maintenance/ OFA/Temperature alarm Statistics: Average ph measurement Buzzer Standards: No. 004/0/CE EMC directive No. 006/9/CE "DBT low voltage directive" No. 0/6/UE, 00/96/CE "RoHS and WEEE directives" 0x46 mm INSTALLATION KIT INSTALLATION EXAMPLE in injection probe holder ADPSTC Foot filter ADSP ph electrode with m cable ADELTPH0 Tubo in PVC Ø, 4m ADSP6000 Wall fixing bracket ADSP0000 Drilling tip cone Ø4 ADSP60009 ph4 and ph7 buffer solutions ADSPH4 ADSPH7 Empty bottle to wash the ph probe ADSP Wall plugs and screws ADSP POWER FLOW RATE PRESSURE WATT PIPE I/h bar ADS40000A00W SIMPOOL ph 0 VAC.4 SANTOPRENE. 0.0 ADS000000A000 SIMPOOL ph 0 VAC SANTOPRENE. 0.0 ADDV40000A000 SIMPOOL PRO phtemp* 0 VAC.4 SANTOPRENE. 0.0 ADD000000A000 SIMPOOL PRO phtemp* 0 VAC SANTOPRENE * temperature probe not included

6 SIMPOOL RX Context of use: For private pools with a volume up to 00 cu. m, for timed dosing of chlorine or other liquid disinfectants depending on the Rx potential read through the builtin tool. Description: Digital peristaltic pump with builtin Rx instrument Ideal for the proportional dosing of chlorine and other disinfectants for the pool. Easy, precise and flexible use. Digital display switched on even without circulation flow, flow presence/absence control through a connection to the recirculation pump (Inhibit). Level probe compatible. The kit includes: Rx electrode, 4 m suction/injection pipe, mv buffer solution to calibrate the electrode, wall fixing bracket and dowels, in electrode holder collar and product injection suitable for DN06 ADPSTC pipes, foot filter. Technical features: Power supply: standard 0 VAC WATT (max) Level inputs: standard INHIBIT inputs: 0 VAC to activate and allow the dosing (circulation pump) Switch: on/off/prime Probe type: Rx electrode LIGHT model Range 0999 mv (Adjisutable range alarm) Pause mode PRO model Reduced Range mv (specific for Swimming Pool use) Range/Maintenance/ OFA/ alarm Statistics: Average mv measurement Buzzer Standards: No. 004/0/CE EMC directive No. 006/9/CE "DBT low voltage directive" No. 0/6/UE, 00/96/CE "RoHS and WEEE directives" 0x46 mm + Rx ) Kit) INSTALLATION EXAMPLE INSTALLATION KIT in injection probe holder ADPSTC Foot filter ADSP Rx electrode with m cable ADELTRX0 Drilling tip cone Ø4 ADSP60009 Tubo in PVC Ø, 4m ADSP6000 mv 47 buffer solution ADSRX Wall fixing bracket ADSP0000 Wall plugs and screws ADSP POWER FLOW RATE PRESSURE WATT PIPE I/h bar ADSV40000A000 SIMPOOL LIGHT Rx 0 VAC.4 SANTOPRENE. 0.0 ADS000000A000 SIMPOOL LIGHT Rx 0 VAC SANTOPRENE. 0.0 ADDV40000A000 SIMPOOL PRO Rx 0 VAC.4 SANTOPRENE. 0.0 ADD000000A000 SIMPOOL PRO Rx 0 VAC SANTOPRENE. 0.0

7 Chemical Dosing Equipment TECHNOPOOL TT 90mm 40mm + ) C Kit) 4mm Context of use: For the dosing of active oxygen and disinfectants in private pools. Description: Peristaltic pump with builtin timer and temperature control (probe included) for the proportional dosing of active oxygen and disinfectants, with installation kit and equipment. The dosing frequency can be set on hour 4 hours / day 7 days High flow rate PT00 temperature probe included Proportionality range C Operating range C Power supply 00V 0/60 Hz. The kit includes: Suction/injection pipe Wall fixing bracket and dowels Temperature probe in electrode holder with builtin injection valve Suitable for DN06 pipes Standards: No. 004/0/CE EMC directive No. 006/9/CE "DBT low voltage directive" No. 0/6/UE, 00/96/CE "RoHS and WEEE directives" 0x60x00 mm INSTALLATION KIT INSTALLATION EXAMPLE in injection probe holder ADPSTC Foot filter ADSP PT00 Temp. probe ADSTS00N Drilling tip cone Ø4 ADSP60009 Tubo in PVC Ø, 4m ADSP6000 Wall plugs and screws ADSP Wall fixing bracket ADSP6006 FLOW RATE PRESSURE WATT PIPE I/h bar AD0TT40000A x AD0TT00000A00 4 x

8 TECHNOPOOL PHRX Context of use: For private pools with double builtin ph and Rx tool, suitable for the dosing of acid/alkaline correctors depending on the ph reading, and for the dosing of chlorine or other disinfectants depending on the Rx potential reading. Description: Double peristaltic pump with ph and Rx builtin instrument to measure and adjust ph and Redox potential. Proportional dosing. Display with digital controls Measurement range 9 ph, 0999 mv Acoustic alarms Protection password Power supply 00V 0/60Hz. With installation kit and equipment consists of: Suction/injection pipe, buffer solutions Wall fixing bracket and dowelsph and Rx electrodes N Probe Holder with Injection valve for tube DN06 Injection valves Foot filters. (x) Compatible with: Level probes Flow and temperature probe Standards: No. 004/0/CE EMC directive No. 006/9/CE "DBT low voltage directive" No. 0/6/UE, 00/96/CE "RoHS and WEEE directives" 90x44x6 mm 0mm 04mm ) ph Rx + 0mm Kit ) INSTALLATION EXAMPLE INSTALLATION KIT in injection probe holder ADPSTC Foot filter ADSP ph electrode with m cable ADELTPH0 Drilling tip cone Ø4 ADSP60009 Rx electrode with m cable ADELTRX0 ph4 and ph7 buffer solutions ADSPH4 ADSPH7 Tubo in PVC Ø, 4m ADSP6000 mv 47 buffer solution ADSRX Wall fixing bracket ADSP6006 Wall plugs and screws ADSP FLOW RATE PRESSURE WATT PIPE I/h bar AD0T00G0G000A00.4/.4 4 x AD0T00G0T000A00.4/ 4 x

9 Chemical Dosing Equipment TECHNOPOOL 0mm 04mm INSTALLATION KIT in injection probe holder ADPSTC ) ph Rx C + Kit) 0mm Foot filter ADSP Context of use: For private pools with multifunctional builtin tool: ph, Temperature and Rx (upon request). Suitable for the dosing of acid/alkaline corrector depending on the ph reading, and for the timed dosing of the disinfectant (like Hydrogen peroxide) depending on water temperature. Also available with the builtin Rx potential reading tool, for a proportional dosing of chlorine. Description: Triple peristaltic pump with builtin timer and ph, Temperature and Redox instruments (TpHRx model only). Acid/Alkaline corrector proportional dosing Timed dosing of disinfectant products whose quantity is compensated depending on the temperature Disinfectant dosing proportioned to the Redox potential (TpHRx model only) Display with digital controls. Acoustic alarms Protection password Level probes compatible Flow sensor Connection to the recirculation pump to allow the dosing (V) Measurement range 9 ph, 0999 mv. Power supply 00V 0/60Hz With kit and equipment for a correct installation consists of: Suction/injection pipe Wall fixing bracket and dowels ph, temperature and Rx electrodes (Rx model only) Buffer solutions Probe holder collars Injection valves Foot filters. Standards: No. 004/0/CE EMC directive No. 006/9/CE "DBT low voltage directive" No. 0/6/UE, 00/96/CE "RoHS and WEEE directives" 90x44x6 mm INSTALLATION EXAMPLE PT00 Temp. probe ADSTS00N Rx electrode ph electrode with m cable ADELTPH0 ADELTRX0 Tubo in PVC Ø, 4m ADSP6000 Drilling tip cone Ø4 ADSP60009 ph4 and ph7 buffer solutions ADSPH4 ADSPH7 mv 47 buffer solution ADSRX Wall fixing bracket ADSP6006 Wall plugs and screws ADSP PROBES FLOW RATE PRESSURE WATT PIPE I/h bar AD000G0G000A00 TPHT TEMP. ph x AD4600G0G000A00 TPHRX TEMP. ph Rx x

10 SOLENOID DRIVEN DOSING PUMPS HC 0 IMPROVED RANGE Context of use: Constant flow rate dosing pump with pulse frequency regulation. Easy to set, with a single adjustment potentiometer and a LED. Upon request PI version to be used with water meter for proportional dosing of antimicosis Low level probe facility Technical features: Pump body Diaphragm Balls Body valve Orings Spring loaded injection valve Injection fitting Foot valve Power supply Standard version PTFE PYREX Hastelloy/Pyrex 0v Upon request PTFE; ceramic Dutral Hastelloy ceramic 0v (Some models) Standards: No. 004/0/CE EMC directive No. 006/9/CE "DBT low voltage directive" No. 0/6/UE, 00/96/CE "RoHS and WEEE directives" 9x600 mm INSTALLATION KIT Wall fixing bracket ADSP600 PVC crystal Pipe (m) ADSP PE injection pipe ( m) ADSP Foot filter ADSP Wall plugs and screws ADSP Injection valve M ½ Gas ADSP AD AD AD AD AD AD PI version AD AD AD AD AD AD FLOW RATE I/h PRESSURE bar STROKES BPM/SPM STROKE ml/colpo CONSUMPTION Watt TUBE PUMP HEAD ½" ½" ½" ½" ½" ½"

11 Chemical Dosing Equipment HC PH NEW INSTALLATION KIT ph electrode with m cable ADELTPH0 Wall fixing bracket ADSP600 PE injection pipe ( m) ADSP PVC crystal Pipe (m) ADSP Wall plugs and screws ADSP ph ) Kit) Injection valve M ½ Gas ADSP ph4 and ph7 buffer solutions ADSPH4 ADSPH7 Threaded probe holder ADPST Foot filter ADSP Context of use: For private pools, to dose the acid/alkaline corrector with the builtin ph reading tool. Description: Electromagnetic pump with builtin ph tool for a proportional dosing of acid/alkaline products, with installation kit and equipment. Dosing mode selectable in constant or proportional mode. Renforced housing, suitable for aggressive working enviroments; Input: level probe, inhibit, standby, flow sensor, injection; Output: alarm or dosing relay; Statistics; Password; Language and Unit measure selectable; Calibration flowrate; Simplified setting by user menu; Alphanumeric display, lines 6 characters, to simplify pump managing, during the working mode and during the programmation; Power supply 0 Vac. Upon request: 0V; IP6 protection degree; Wall mounting bracket supplied in installation kit; Manual bleed valve (priming); Upon request PImA version available. Working mode: Constant flowrate On/Off mode (flow rate in %); Selfcalibration of measure probe; Proportional dosing to the selected setpoint value; Selectable Alarms: Level (with reserve, early warning), Flow (flow sensor input), Strokes (max number of strokes), OFA (Over Feed Alarm), RANGE. The kit contains: Suction/injection pipe; ph buffer solutions to calibrate the electrode; Wall fixing bracket and dowels; Probe holder G½ ; ph electrode; Foot filter and injection valve. Technical features: Pump body Pump housing Diaphragm Balls Body valve Orings Injection ball valve (Spring) Injection fitting Foot valve Power supply Standard version PTFE PYREX Hastelloy/Pyrex 0v Standards: No. 004/0/CE EMC directive No. 006/9/CE "DBT low voltage directive" No. 0/6/UE, 00/96/CE "RoHS and WEEE directives" 0x60x00 mm Upon request /PVC auto. bleeding PTFE; ceramic Dutral Hastelloy ceramic 0v (Some models) 6 AD AD AD FLOW RATE I/h PRESSURE bar STROKES BPM/SPM STROKE ml/colpo CONSUMPTION Watt 4 6 TUBE PUMP HEAD ½" ½" ½"

12 HC Rx NEW Context of use: For private pools, to dose chlorine or other disinfectants depending on the Rx potential read with the builtin tool. Description: Electromagnetic pump with builtin Rx tool to dose the chlorine or other disinfectants with installation kit and equipment. Multifunction solenoid digital dosing pumps. Dosing mode selectable in constant or proportional mode. Renforced housing, suitable for aggressive working enviroments; Input: level probe, inhibit, standby, flow sensor, injection; Output: alarm or dosing relay; Statistics; Password; Language and Unit measure selectable; Calibration flowrate; Simplified setting by user menu; Alphanumeric display, lines 6 characters, to simplify pump managing, during the working mode and during the programmation; Power supply 0 Vac. Upon request: 0V; IP6 protection degree; Wall mounting bracket supplied in installation kit; Manual bleed valve (priming); High flow rate; Measurement range 0999 mv; Level probe compatible; Power supply 00V 0/60Hz; Upon request PImA version available. Working mode: Constant flowrate On/Off mode (flow rate in %) Selfcalibration of measure probe Proportional dosing to the selected setpoint value Selectable Alarms: Level (with reserve, early warning), Flow (flow sensor input), Strokes (max number of strokes), OFA (Over Feed Alarm), RANGE. The kit contains: Suction/injection pipe; mv buffer solution to calibrate the electrode; Wall fixing bracket and dowels; Probe holder G½ ; Rx electrode; Foot filter and injection valve. + Rx ) Kit) Technical features: Pump body Pump housing Diaphragm Balls Body valve Orings Injection ball valve (Spring) Injection fitting Foot valve Power supply Standards: No. 004/0/CE EMC directive No. 006/9/CE "DBT low voltage directive" No. 0/6/UE, 00/96/CE "RoHS and WEEE directives" 9x600 mm Standard version PTFE PYREX Hastelloy/Pyrex 0v Upon request /PVC auto. bleeding PTFE; ceramic Dutral Hastelloy ceramic 0v (Some models) INSTALLATION KIT Rx electrode with m cable ADELTRX0 Wall fixing bracket ADSP600 PE injection pipe ( m) ADSP PVC crystal Pipe (m) ADSP Wall plugs and screws ADSP Injection valve M ½ Gas ADSP mv 47 buffer solution ADSRX Threaded probe holder ADPST Foot filter ADSP AD AD AD FLOW RATE I/h PRESSURE bar STROKES BPM/SPM STROKE ml/colpo CONSUMPTION Watt 4 6 TUBE PUMP HEAD ½" ½" ½"

13 Chemical Dosing Equipment HC Context of use: Constant flow rate dosing pump with pulse frequency regulation. Easy to set, with a single adjustment potentiometer and a LED. Level probe compatible Description: Analogue electromagnetic constant flow rate dosing pump Highstrength PBT container, suitable for high temperatures (both places and liquids) Level probe input Double pulse regulation scale 000% or 00% Power supply: 0VAC 0/60Hz OnOff switch IP6 protection Analogue interface with one knob and a LED Manual priming valve Wall or foot mounting (brackets included in the kit) Technical features: DOUBLE REGULATION SCALE 000% O 00% precise dosing even at low flow rates BODY PUMP high chemical compatibility FIXING BRACKET to simplify the installation PBT CASE high mechanical resistance ecofriendly ergonomic low flammability BUILTIN PIPE HOLDER safe and clean installation REMOVABLE CONNECTIONS easy maintenance of the pump INSTALLATION KIT Wall fixing bracket ADSP600 PVC crystal Pipe (m) ADSP Pump body Diaphragm Balls Body valve Orings Spring loaded injection valve Injection fitting Foot valve Power supply Standard version PVCF PTFE PTFE Hastelloy/P TFE 0v Upon request PTFE or ceramic Dutral Hastelloy ceramic 0v Support base ADBAS00 PE injection pipe ( m) ADSP Foot valve Injection valve ADSP60000 ADSP6000 Wall plugs and screws ADSP Standards: No. 004/0/CE EMC directive No. 006/9/CE "DBT low voltage directive" No. 0/6/UE, 00/96/CE "RoHS and WEEE directives" 9x600 mm AD AD AD AD AD FLOW RATE I/h PRESSURE bar STROKES BPM/SPM STROKE ml/colpo CONSUMPTION Watt TUBE PUMP HEAD ½" ½" ½" ½" ½"

14 HC997 PIMACLK Context of use: Multifunction dosing pump. Microprocessor, display and digital control technology. Constant functioning with flow rate regulation in pulse/minute; pulse/hour; pulse/day. Daily/weekly programmable timer. Description: Up to programmes for each day of the week. Power supply 0 0V 0/60Hz. 0 V 0/60 Hz upon request. Level probe compatible. Protection password and dosing statistics control Technical Features: Proportional 0/40mA, Ppm, xn, :N, xn (M) Ist, xn (M) Prop. Constant: Flow rate, Time, Quantity to dose, Cyclic Timer Mode: Daily and weekly Pump body Diaphragm Balls Body valve Orings Spring loaded injection valve Injection fitting Foot valve Power supply Standard version PVCF PTFE PTFE Hastelloy/P TFE 0v Upon request PTFE or ceramic Dutral Hastelloy ceramic 0v Standards: No. 004/0/CE EMC directive No. 006/9/CE "DBT low voltage directive" No. 0/6/UE, 00/96/CE "RoHS and WEEE directives" 6. 9x600 mm 47 INSTALLATION KIT Wall fixing bracket ADSP600 PVC crystal Pipe (m) ADSP Support base ADBAS00 Foot valve Injection valve ADSP60000 ADSP6000 PE injection pipe ( m) ADSP Wall plugs and screws ADSP AD AD AD AD AD FLOW RATE I/h PRESSURE bar STROKES BPM/SPM STROKE ml/colpo CONSUMPTION Watt TUBE PUMP HEAD ½" ½" ½" ½" ½"

15 Chemical Dosing Equipment HC999 PIMACLK Context of use: Multifunction HIGH FLOW RATE dosing pump. Microprocessor, display and digital control technology. Constant functioning with flow rate regulation in pulse/minute; pulse/hour; pulse/ day. Daily/weekly programmable timer. Description: Up to programmes for each day of the week. Power supply 00V 0/60Hz. 0 V 0/60 Hz upon request. Level probe compatible. Protection password and dosing statistics control Standards: No. 004/0/CE EMC directive No. 006/9/CE "DBT low voltage directive" No. 0/6/UE, 00/96/CE "RoHS and WEEE directives" 0x60x00 mm Technical Features: Pump body Diaphragm Balls Valves Orings Spring ball injection valve Injection fitting Foot valve Power supply Standard version mod. mod. 4 PVC PBT PBT PTFE PTFE PYREX PYREX Hastelloy/P YREX Hastelloy/P YREX PVC PVC 0v 0v Upon request PTFE Dutral Hastelloy PTFE (Mod. ) v INSTALLATION KIT ADSP ADSP ADSP ADSP ADSP ADSP ADSP ADSP ADSP600 ADBAS00 ADSP6000 ADSP ADSP60000 ADSP ADSP ADSP ADSP ADSP ADSP ADSP ADSP ADSP6000 ADSP60000 ADSP600 ADSP ADBAS00 DESCRIPTION Mod. Mod. Mod. 4 PE delivery tube (m) PVC crystal tube (suction + bleed) ( m) PE delivery tube 6x PE 0x4 delivery tube PVC 0x4 suction tube Foot filter foot filter 0x4 Injection valve ball /" Injection valve /" 6x Injection valve /" 0X4 Wall fixing bracket Anchors and screws Horizontal mounting bracket x x m m m AD AD AD AD99040Y FLOW RATE I/h PRESSURE bar STROKES BPM/SPM STROKE ml/colpo CONSUMPTION Watt TUBE / 6x ½" 0x4 PUMP HEAD ½" ½" PVV ½"

16 HC00 PH Context of use: For private pools, to dose the acid/alkaline corrector with the builtin ph reading tool. Description: Electromagnetic pump with builtin ph tool for a proportional dosing of acid/alkaline products. High flow rate Mechanic run adjustment (volume injection) Measurement range 04 ph Level probe compatible Power supply 00V 0/60Hz. The kit contains: Suction/injection pipe mv buffer solution to calibrate the electrode Wall fixing bracket and dowels Collar bracket for DN0 pipe and G½ probe holder ph electrode Foot filter. Technical Features: Pump body Diaphragm Balls Valve fitting Orings Spring loaded injection valve Injection fitting Foot strainer Suction and air bleed pipe Delivery pipe Power supply Standard version pp PTFE Hastelloy PVC PE 0v Standards: No. 004/0/CE EMC directive No. 006/9/CE "DBT low voltage directive" No. 0/6/UE, 00/96/CE "RoHS and WEEE directives" 0x60x00 mm Upon request PVDC, PVC Auto. bleeding PTFE ; ceramic Dutral Hastelloy ceramic 0v INSTALLATION KIT 4 ph electrode with m cable ADELTPH0 PE injection pipe ( m) ADSP PVC crystal Pipe (m) ADSP ph Foot filter ADSP Injection valve M ½ Gas ADSP Threaded probe holder ADPST ) Kit) ph4 and ph7 buffer solutions ADSPH4 ADSPH7 AD004000P000 AD000000P000 AD00000P000 FLOW RATE I/h PRESSURE bar 9 0. STROKES BPM/SPM STROKE ml/colpo CONSUMPTION Watt TUBE PUMP HEAD /" /" /"

17 Chemical Dosing Equipment HC00 RX 4 INSTALLATION KIT Rx electrode with m cable ADELTRX0 PE injection pipe ( m) ADSP PVC crystal Pipe (m) ADSP Rx ) Kit) Foot filter ADSP Injection valve M ½ Gas ADSP Threaded probe holder ADPST Context of use: For private pools, to dose chlorine or other disinfectants depending on the Rx potential read with the builtin tool. Description: Electromagnetic pump with builtin Rx tool for the proportional dosing of chlorine or other disinfectants, with installation kit and equipment. High flow rate Mechanic run adjustment (volume injection) Measurement range 0999 mv Level probe compatible Power supply 00V 0/60Hz. The kit contains: suction/injection pipe mv buffer solution to calibrate the electrode wall fixing bracket and dowels collar bracket for DN0 pipe and G½ probe holder Rx electrode foot filter. Technical Features: Pump body Diaphragm Balls Valve fitting Orings Spring loaded injection valve Injection fitting Foot strainer Suction and air bleed pipe Delivery pipe Power supply Standard version pp PTFE Hastelloy PVC PE 0v Standards: No. 004/0/CE EMC directive No. 006/9/CE "DBT low voltage directive" No. 0/6/UE, 00/96/CE "RoHS and WEEE directives" 0x60x00 mm Upon request PVDC, PVC Auto. bleeding PTFE ; ceramic Dutral Hastelloy ceramic 0v mv 47 buffer solution ADSRX AD004000R000 AD000000R000 AD00000R000 FLOW RATE I/h PRESSURE bar 9 0. STROKES BPM/SPM STROKE ml/colpo CONSUMPTION Watt TUBE PUMP HEAD /" /" /"

18 HC0 Context of use: For private pools, to dose chemicals by time. Description: Multifunction dosing pump. Mechanic adjustment of each injection. Microprocessor, display and digital control technology. Proportional functioning with external digital signal, with input pulses divider and multiplier. Proportional functioning with 40 ma direct and inverse analogue signal. Constant functioning with flow rate adjustment in pul/minute, min. pulse/0 minutes. Timed functioning with daily/ weekly timer. Level probe compatible (probe and connector not included) IP6 protection. Technical Features: Pump body Diaphragm Balls Valve fitting Orings Spring loaded injection valve Injection fitting Foot strainer Suction and air bleed pipe Delivery pipe Power supply Standard version PTFE Hastelloy PVC PE 0v Standards: No. 004/0/CE EMC directive No. 006/9/CE "DBT low voltage directive" No. 0/6/UE, 00/96/CE "RoHS and WEEE directives" x60x00 mm Upon request PVC Auto. bleeding PTFE ; ceramic Dutral Hastelloy ceramic 0v 4 INSTALLATION KIT PE injection pipe ( m) ADSP Foot valve ADSP60000 PVC crystal Pipe (m) ADSP Injection valve ADSP6000 AD40040P04000 AD40000P00400 AD4000P00400 FLOW RATE I/h PRESSURE bar 9 0. STROKES BPM/SPM STROKE ml/colpo CONSUMPTION Watt TUBE PUMP HEAD /" /" /"

19 Chemical Dosing Equipment PREASSEMBLED PANELS ATECHNOPOOL SYSTEM PHRX Complete Panel with proportional control of ph & Redox comprises: Twin peristaltic pump TECHNOPOOL phrx. Modular probe holder with prefilter, water check valve and flow sensor. ph and Redox electrodes & buffer solutions. low level switches. Standards: No. 004/0/CE EMC directive No. 006/9/CE "DBT low voltage directive" No. 0/6/UE, 00/96/CE "RoHS and WEEE directives" 660x6070 mm INSTALLATION KIT INSTALLATION EXAMPLE Rx electrode with m cable ADELTRX0 ph electrode with m cable ADELTPH0 ph4 and ph7 buffer solutions ADSPH4 ADSPH7 foot valve ADSP Pool Min 0cm ph Pump Cl Pump PE injection pipe ( m) ADSP bottom valve M½ Gas (VLVT) ADSP Heater PVC crystal Pipe (m) ADSP Bypass connectors ADSP0000 ADSP00400 ph Probe Rx Probe mv 47 buffer solution ADSRX Tube 0x4 soft type PVC 4m ADSP Chemicals FLOW RATE PRESSURE WATT TUBE DIMENSION I/h bar mm ADPSP0. 00x

20 APOOL SYSTEM PHRX Complete Panel with proportional control of ph and Redox for swimming pool up to 00 comprises: AQUAPOOL pump phrx PTFEVT. Modular probe holder with prefilter, water check valve and flow sensor. PH and Redox electrodes and buffer solutions. low level switches. Technical Features: Pump body Diaphragm Balls check valves Valve fitting Seals/Orings Injection fitting Foot Valve Standards: No. 004/0/CE EMC directive No. 006/9/CE "DBT low voltage directive" No. 0/6/UE, 00/96/CE "RoHS and WEEE directives" 660x6070 mm Standard version PTFE PTFE INSTALLATION EXAMPLE INSTALLATION KIT Pool Min 0cm ph Pump Cl Pump Rx electrode with m cable ADELTRX0 ph electrode with m cable ADELTPH0 ph4 and ph7 buffer solutions ADSPH4 ADSPH7 Foot valve ADSP60000 Heater ph Probe Rx Probe H MAX. m x4 PE injection pipe ( m) ADSP PVC crystal Pipe (m) ADSP bottom valve M ½ Gas ADSP6000 Bypass connectors ADSP0000 ADSP00400 Chemicals mv 47 buffer solution ADSRX Tube 0x4 soft type PVC 4m ADSP FLOW RATE PRESSURE WATT TUBE DIMENSION I/h bar mm ADPS00 00x ADPS x

21 Chemical Dosing Equipment APOOL SYSTEM PHCL Complete Panel with proportional control of ph and free chlorine for swimming pool up to 00 comprises: AQUAPOOL pump phci PTFEVT. Modular probe holder with: prefilter, water check valve and flow sensor. PH and PtCu electrodes and ph buffer solutions. low level switches. Technical Features: Pump body Diaphragm Balls check valves Valve fitting Seals/Orings Injection fitting Foot Valve Standards: No. 004/0/CE EMC directive No. 006/9/CE "DBT low voltage directive" No. 0/6/UE, 00/96/CE "RoHS and WEEE directives" 660x6070 mm Standard version PTFE PTFE INSTALLATION KIT INSTALLATION EXAMPLE ph4 and ph7 buffer solutions ADSPH4 ADSPH7 ph electrode with m cable ADELTPH0 Foot valve ADSP60000 bottom valve M ½ Gas ADSP6000 Pool Min 0cm ph Pump Cl Pump x4 PE injection pipe ( m) ADSP PVC crystal Pipe (m) ADSP Bypass connectors ADSP0000 ADSP00400 Tube 0x4 soft type PVC 4m ADSP Heater ph Probe Rx Probe H MAX. m " water filter fitted with 0 micron net cartridge ADFV Chemicals FLOW RATE PRESSURE WATT TUBE DIMENSION I/h bar mm ADPS00 00x ADPS x

22 APOOL SYSTEM PHCLJ Complete Panel with proportional control of ph & free chlorine for swimming pool up to 00 comprises: AQUAPOOL pump phclj PTFEVT. Modular probe holder with prefilter, water check valve and flow sensor. ph and Cl electrodes (ADELCLJ) & ph buffer solutions. low level switches. Technical Features: Pump body Diaphragm Balls check valves Valve fitting Seals/Orings Injection fitting Foot Valve Standards: No. 004/0/CE EMC directive No. 006/9/CE "DBT low voltage directive" No. 0/6/UE, 00/96/CE "RoHS and WEEE directives" 660x6070 mm Standard version PTFE PTFE INSTALLATION EXAMPLE INSTALLATION KIT Pool Min 0cm ph Pump Cl Pump Amperometric probe for free chlorine reading low ph influence ADELCLJ ph electrode with m cable ADELTPH0 ph4 and ph7 buffer solutions ADSPH4 ADSPH7 Foot valve ADSP60000 Heater ph Probe Rx Probe H MAX. m x4 PE injection pipe ( m) ADSP PVC crystal Pipe (m) ADSP bottom valve M ½ Gas ADSP6000 Bypass connectors ADSP0000 ADSP00400 Chemicals " water filter fitted with 0 micron net cartridge ADFV Tube 0x4 soft type PVC 4m ADSP FLOW RATE PRESSURE WATT TUBE DIMENSION I/h bar mm ADPS00 00x ADPS x

23 Chemical Dosing Equipment GSM/GPRS REMOTE CONNECTION SCHEME APOOL SYSTEM CONNECT APOOL SYSTEM CONNECT GSM/GPRS APOOL SYSTEM CONNECT APOOL SYSTEM CONNECT APOOL SYSTEM CONNECT APOOL SYSTEM CONNECT CABLE CONNECTION SCHEME UP TO KM POSSIBLE FOR APOOL SYSTEM CONNECT RS4 or CONV. USB/RS4 RS4 or MODBUS conv. 4 conv. 4 conv. 4 APOOL SYSTEM CONNECT APOOL SYSTEM CONNECT APOOL SYSTEM CONNECT 9

24 GSM/GPRS MODEM GSM/GPRS modem for connect version with: remote control software via PC (for a correct connection modems are required: a transmission and a reception one). DESCRIPTION ADGSM ADGSMAN ADGSMAN4 GSM/GPRS Modem Complete with PC SW and Short Antenna Short Antenna Antenna 4m SERIAL CABLES AND EQUIPMENT DESCRIPTION VERSION ADSP ADRSDMM ADRSDMF ADRSIMF ADSP60006 ADSP Nullmodem Adaptor Serial Cable MM m Serial Cable MM m Nullmodem Adaptor MF m USBRS Adaptor Cable RS4 Cable For Basic System Pool Connect Connect Connect Connect Connect Standard 99

25 Chemical Dosing Equipment APOOL TOP EVO PHCL Control panel and proportional regulation of ph and Chlorine from 0,00 ppm for private pools composed by: N. AE START phrx N. HC ma N chlorine cell (PtCu) complete with flow sensor and regulator (cod. ADCGF) ph electrode PtCu probe for M Cholrine reading Temperature probe ph buffer solutions level probes Power supply 00V 0/60Hz Available upon request customized solution for pubblic pools up to 00mc. Technical Features: Pump head Pump housing Diaphragm Balls Body valve Orings Injection ball valve (Spring) Injection fitting Foot valve Power supply 660x6070 mm Standard version PTFE PYREX Hastelloy/Pyrex 0v Upon request /PVC auto. bleeding PTFE; ceramic Dutral Hastelloy ceramic 0v INSTALLATION KIT INSTALLATION EXAMPLE ph4 and ph7 buffer solutions ADSPH4 ADSPH7 " water filter fitted with 0 micron net cartridge ADFV ph electrode with m cable ADELTPH0 foot valve ADSP PE injection pipe ( m) ADSP bottom valve M½ Gas (VLVT) ADSP x4 PVC crystal Pipe (m) ADSP Bypass connectors ADSP0000 ADSP00400 FLOW RATE PRESSURE WATT TUBE DIMENSION I/h bar mm ADPTE x ADPTE x

26 APOOL TOP PRO EVO PHCLJ Control panel and proportional regulation of ph and Chlorine from 0,00 ppm for private pools composed by: N. AE START phclj N. HC ma Modular probe holder for ph and J probes ph electrode AJ probe for Chlorine temperature probe; ph buffer solutions. level probes Power supply 00V 0/60Hz Available upon request hydrogen peroxide or bromine version Available upon request customized solution for pubblic pools up to 00mc. Technical Features: Pump head Pump housing Diaphragm Balls Body valve Orings Injection ball valve (Spring) Injection fitting Foot valve Power supply 660x6070 mm Standard version PTFE PYREX Hastelloy/Pyrex 0v Upon request /PVC auto. bleeding PTFE; ceramic Dutral Hastelloy ceramic 0v INSTALLATION EXAMPLE INSTALLATION KIT Amperometric probe for free chlorine reading low ph influence ADELCLJ ph4 and ph7 buffer solutions ADSPH4 ADSPH7 ph electrode with m cable ADELTPH0 foot valve ADSP PE injection pipe ( m) ADSP bottom valve M½ Gas (VLVT) ADSP x4 PVC crystal Pipe (m) ADSP Bypass connectors ADSP0000 ADSP00400 " water filter fitted with 0 micron net cartridge ADFV Tube 0x4 soft type PVC 4m ADSP FLOW RATE PRESSURE WATT TUBE DIMENSION I/h bar mm ADPTE x ADPTE x

27 Chemical Dosing Equipment 4 CONTROLLERS AND ANALYSERS ADIN0 START NEW Digital Controller DIN rail mounting. Backlighted LCD display, lines x 6 characters and 4 keys keypad, for an easy user interface setpoints with independent adjustment and free relay outputs, selectables in OnOff mode, Proportional or TimePause Mode 0/40 ma Proportional Output with selectable range PT00 temperature probe, Level and Flow sensor inputs; Setting menu protected by password Fast setting by user menu selection, manual control of both relays (pumps priming), runtime monitoring of all outputs and control of the last probe calibration Realy n. selectable as setpoint or on each alarm signal. Statistics of the alarms, of the number of setpoint activations and of the operating time of each relay Selfcalibration of measure probes ADIN0S phrx Controller for measurement and control of ph measure range ph, with 0.0 ph accuracy, Redox potential, measure range mv, with mv accuracy Changing of the monitored parameter by Advanced Settings Menu, protected by password. Probe p.0 ADIN0S Clorine Controller for measurement and regulation of free chlorine available for amperometric Pt Cu probes Measure Range: ppm. Probe p. ADIN0S CLJ Controller for measurement and regulation of free chlorine, hydrogen peroxide, bromine, ozono and each other measure available for amperometric selective membrane 40mA probes; Measure Range selectable: ppm/ ppm ppm/ ppm/000ppm. Probe p. 0x0x4 mm PROBES ADINS0PHRX Aqua Din 0 start phrx controller ph Rx ADINS0CL Aqua Din 0 start chlorine (PTCU) controller CHLORINE (PtCu) ADINS0CLJ Aqua Din 0 start M AJ probes AJ

28 Scale Scale Current output Relay Output Relay Output Display Controls Temperature Hysteresis Alarms Power supply Consumption Package Weight phrx Chlorine (PtCu) AJ ph/±.00 mv 00 ppm ppm ± 0.0 ph/± mv ±0.0 ppm 0.0 ppm programmable 0/40 ma Proportional Output 400 Ω max with galvanic separation 06 VAC Watt 0 gr DH Related to setpoint value, free contact0 A max working modeonoff, Proportional or Time/Pause Mode Related to setpoint value or alarms, free contact0 A max working mode ONOFF, Proportional or Time/Pause Mode (if related to setpoint ) Backlighted LCD display, lines x 6 characters 4 keys keypad Manual or automatic temperature correction by PT00 sensor (Only ph version) Selectable for each setpoint Measure, invariance of the measure, OFA, flow, LevelEach alarm can be set on relay 6 modules DIN phredox RL RL LEV FLOW Temp. PT00 OUT ma S BNC ph/rx Chlorine and AJ RL RL LEV FLOW S Temp. PT00 OUT ma ppm Probe S +V

29 Chemical Dosing Equipment AR 0 START NEW Digital Controller for panel mounting 4x96. Backlighted LCD display, lines x 6 characters and 4 keys keypad, for an easy user interface setpoints with independent adjustment and free relay outputs, selectables in On Off mode, Proportional or TimePause Mode 0/40 ma Proportional Output with selectable range PT00 temperature probe, Level and Flow sensor inputs Setting menu protected by password Fast setting by user menu selection, manual control of both relays (pumps priming), runtime monitoring of all outputs and control of the last probe calibration; Realy n. selectable as setpoint or on each alarm signal. Statistics of the alarms, of the number of setpoint activations and of the operating time of each relay Selfcalibration of measure probes AR 0 S phredox Controller for measurement and control of ph measure range ph, with 0.0 ph accuracy, Redox potential, measure range mv, with mv a ccuracy Changing of the monitored parameter by Advanced Settings Menu, protected by password. Probe p.0 AR 0 S Clorine Controller for measurement and regulation of free chlorine available for amperometric Pt Cu probes Measure Range: ppm. Probe p. AR 0 S CLJ Controller for measurement and regulation of free chlorine, hydrogen peroxide, bromine, ozono and each other measure available for amperometric selective membrane 40mA probes Measure Range selectable: ppm/ ppm ppm/ ppm/000ppm. Probe p. 0x0x4 mm PROBES ADRS0PHRX Aqua AR 0 start phrx controller ph Rx ADRS0CL Aqua AR 0 start chlorine (PTCU) controller CHLORINE (PtCu) ADRS0CLJ Aqua AR 0 start for AJ probes AJ

30 Scale Scale Current output Relay Output Relay Output Display Controls Temperature Hysteresis Alarms Power supply Consumption Package Weight phrx Chlorine (PtCu) AJ ph/±.00 mv 00 ppm ppm 06 VAC Watt 0 gr ± 0.0 ph/± mv ±0.0 ppm 0.0 ppm programmable 0/40 ma Proportional Output 400 Ω max with galvanic separation DH Related to setpoint value, free contact0 A max working modeonoff, Proportional or Time/Pause Mode Related to setpoint value or alarms, free contact0 A max working mode ONOFF, Proportional or Time/Pause Mode (if related to setpoint ) Backlighted LCD display, lines x 6 characters 4 keys keypad Manual or automatic temperature correction by PT00 sensor Selectable for each setpoint Measure, invariance of the measure, OFA, flow, LevelEach alarm can be set on relay Rack 4x96 phredox RL RL FLOW BNC ph/rx Temp. PT00 OUT ma S Chlorine and AJ + S 6 7 ppm Probe RL RL FLOW Temp. PT00 OUT ma S

31 Chemical Dosing Equipment AE START NEW Digital Controller for wall mounting. Backlighted LCD display, lines x 6 characters and 4 keys keypad, for an easy user interface setpoints with independent adjustment and free relay outputs, selectables in On Off mode, Proportional or TimePause Mode 0/40 ma Proportional Output with selectable range PT00 temperature probe, Level and Flow sensor inputs Programmation protected by password Fast setting by user menu selection, manual control of both relays (pumps priming), runtime monitoring of all outputs and control of the last probe calibration Realy n. selectable as setpoint or on each alarm signal. Statistics of the alarms, of the number of setpoint activations and of the operating time of each relay Selfcalibration of measure probes. AE S phredox Controller for measurement and control of ph measure range ph, with 0.0 ph accuracy, Redox potential, measure range mv, with mv accuracy Changing of the monitored parameter by Advanced Settings Menu, protected by password. Probe p.0 7 AE S Clorine Controller for measurement and regulation of free chlorine available for amperometric Pt Cu probes Measure Range: ppm. Probe p. 7 AE S CLJ Controller for measurement and regulation of free chlorine, hydrogen peroxide, bromine, ozono and each other measure available for amperometric selective membrane 40mA probes Measure Range selectable: ppm/ ppm ppm/ ppm/000ppm. Probe p. 7xx60 mm 7, 6, PROBES ADESPHRX Aqua AE start phrx controller ph Rx ADESCL Aqua AE start chlorine (PTCU) controller CHLORINE (PtCu) ADESCLJ Aqua AE startfor AJ probes AJ

32 Scale Scale Current output Relay Output Relay Output Display Controls Temperature Hysteresis Alarms Power supply Consumption Package Weight phrx Chlorine (PtCu) AJ ph/±.00 mv 0.00/.00/0.00/0.00 ppm ppm ± 0.0 ph/± mv ±0.0 ppm 0.0 ppm programmable 0/40 ma Proportional Output 400 Ω max with galvanic separation 06 VAC Watt 00 gr DH Related to setpoint value, free contact0 A max working modeonoff, Proportional or Time/Pause Mode Related to setpoint value or alarms, free contact0 A max working mode ONOFF, Proportional or Time/Pause Mode (if related to setpoint ) Backlighted LCD display, lines x 6 characters 4 keys keypad Manual or automatic temperature correction by PT00 sensor Selectable for each setpoint Measure, invariance of the measure, OFA, flow, LevelEach alarm can be set on relay IP4 wall mounting phredox RL RL LEV FLOW Temp. PT00 OUT ma S BNC ph/rx Chlorine and AJ RL RL LEV FLOW S Temp. PT00 OUT ma ppm Probe S +V

33 Chemical Dosing Equipment SPARE PARTS AND ACCESSORIES ATANK Cylindrical vertical container with selfsupporting structure, flat bottom and hatch with threaded cover. Made in nontoxic UVstabilized polyethylene, for a higher protection from the atmospheric agents, with a neutral translucent colour. The structure is designed depending on the liquid it will contain. It has flat upper surfaces, and a / lower discharge that ease possible couplings. It is monolithic, i.e. moulded in a single piece, with no joints. It has a threaded vent lid, closed upon request, and printed visual level indicator. It can be placed on flat surfaces without particular precautions. ADTANK006 ADTANK00 ADTANK00 ADTANK00 ADTANK00 ADTANK00 L DIMENSIONS Ø x Height 400 x 00 x x x 90 x x 00 AVISC Cylindrical vertical container with selfsupporting structure and flat bottom, suitable for the safety containing of the ATANK tanks. It is made in nontoxic UVstabilised polyethylene to provide a higher protection from atmospheric agents, with a neutral, translucent colour. It is monolithic, i.e. moulded in a single piece, with no joints. It can be placed on flat surfaces without particular precautions. ADVSIC00 ADVSIC00 ADVSIC00 ADVSIC00 ADVSIC00 L DIMENSIONS Ø x Height 700 x x x x x 00 0

34 AGMAN Manual mixer with PVC shaft. SIZE TANK L ADAGMP06 ADAGMP07 AG MANPVC60 AG MANPVC70 ATANK ATANK ADAGMP09 AG MANPVC90 ATANK ASU PVC support to install dosing pumps and mixers. ADSU00 ADSU00 ADSU00 ADSU00 ADSU00 ATANK ATANK ATANK ATANK ATANK 0 ADBAS Foot fixing bracket. ADBAS00 Foot fixing bracket (HC ) 09

35 Chemical Dosing Equipment AGF Fast water mixers. Fast speed threephase AGPVC/AGAISI 400 rpm Motor 0/0 V 0 Htz 0.HP; Fast speed threephase AGPVC/AGAISI 400 rpm Motor 0/0 V 0 Htz 0.HP. SIZE TANK MATERIAL SPEED SINGLEPHASE THREEPHASE L rpm ADAGP06F ADAGP06F ATANK 00 PVC ADAGP07F ADAGP07F ATANK 0000 PVC ADAGP0F ADAGP0F ATANK 00 PVC ADAGP09F ADAGP09F ATANK PVC ADAGA06F ADAGA06F ATANK 00 AISI ADAGA07F ADAGA07F ATANK 0000 AISI ADAGA0F ADAGA0F ATANK 00 AISI ADAGA09F ADAGA09F ATANK AISI

36 AGS Slow water mixers. Slow singlephase AGPVC /AGAISI 70 rpm Motor 0V 0Hz 0.HP Slow speed threephase AGPVC/AGAISI 70 rpm Motor 0/0v 0 Htz 0.HP. SIZE TANK MATERIAL SPEED SINGLEPHASE THREEPHASE L rpm ADAGP06S ADAGP06S ATANK 00 PVC ADAGP07S ADAGP07S ATANK 0000 PVC ADAGP0S ADAGP0S ATANK 00 PVC ADAGP09S ADAGP09S ATANK PVC ADAGA06S ADAGA06S ATANK 00 AISI ADAGA07S ADAGA07S ATANK 0000 AISI ADAGA0S ADAGA0S ATANK 00 AISI ADAGA09S ADAGA09S ATANK AISI

37 Chemical Dosing Equipment ADLASM Suction lance with low level probe. Adjustable length Suitable for tanks with small hole (min. 7 mm) Connection to 4X6 discharge pipe (return line within the tank) Probe level and m completely protected cable Builtin check valve Easy maintenance Instructions kit modes fixing (with ring nut or sleeve) Flow rate up to 00 l/h. Technical Features: Body Body valve Orings Standard version PVCVITON PYREX Upon request PVEDUTRAL Dutral Øma7 7 TOTAL LENGTH (B) SUITABLE FOR TANK ADJUSTABLE LENGTH (A) mm lt mm A Ø B Ø0 Ø40 ØG" 7mm ADTANK ADTANK00 00 ADTANK00 00 ADTANK00 00 ADTANK ADTANK000 0 >00 0 >90 0 >600 0 >40 0 >0 Configuration code: Capacity Balls/Oring materials Low level probe Pipe connection 0 TA tank /0 lt 0 GLVT 0 Low level probe without connector 0 4 x 6 TA tank 60/00 lt A GLDT B Level probe with BNC connector 0 x 4 TA tank 0 lt C Low level probe with HIRSH connector TA tank 00/00 lt TA tank 00 lt

38 DESCRIPTION HIGHT mm TANK L mm ORING PIPE CONNECTOR ADLASM0000 Suction nozzle TA (/0l H400) GLVT C/probe LEV.S/CONN ADLASM00C0 Suction nozzle TA (/0l H400) GLVT C/probe LEV.C/CONN HIRSHMANN ADLASM00B0 Suction nozzle TA (/0l H400) GLVT C/probe LEV.S/BNC BNC DESCRIPTION HIGHT mm TANK L mm ORING PIPE CONNECTOR ADLASM000 Suction nozzle TA (0l H490) GLVT C/probe LEV.S/CONN ADLASM0C0 Suction nozzle TA (0l H490) GLVT C/probe LEV.C/CONN HIRSHMANN ADLASM0B0 Suction nozzle TA (0l H490) GLVT C/probe LEV.S/BNC BNC DESCRIPTION HIGHT mm TANK L mm ORING PIPE CONNECTOR ADLASM000 Suction nozzle TA (60l 00l H700) GLVT C/Probe LEV.S/CONN ADLASM0C0 Suction nozzle TA (60l 00l H700) GLVT C/Probe LEV.C/CONN HIRSHMANN ADLASM0B0 Suction nozzle TA (60l 00l H700) GLVT C/Probe LEV.C/BNC BNC DESCRIPTION HIGHT mm TANK L mm ORING PIPE CONNECTOR ADLASM000 Suction nozzle TA (/00l H940) GLVT C/probe LEV.S/CONN ADLASM0C0 Suction nozzle TA (/00l H940) GLVT C/probe LEV.C/CONN HIRSHMANN ADLASM0B0 Suction nozzle TA (/00l H940) GLVT C/probe LEV.S/BNC BNC ADLASM00 Suction nozzle TA (/00l H940) GLVT C/probe LEV.S/CONN x4 ADLASM0C Suction nozzle TA (/00l H940) GLVT C/probe LEV.C/CONN x4 HIRSHMANN ADLASM0B Suction nozzle TA (/00l H940) GLVT C/probe LEV.S/BNC x4 BNC DESCRIPTION HIGHT mm TANK L mm ORING PIPE CONNECTOR ADLASM000 Suction nozzle TA (00/000l H40) GLVT C/probe LEV.S/CONN ADLASM0C0 Suction nozzle TA (00/000l H40) GLVT C/probe LEV.C/CONN HIRSHMANN ADLASM0B0 Suction nozzle TA (00/000l H40) GLVT C/probe LEV.S/BNC BNC ADLASM00 Suction nozzle TA (00/000l H40) GLVT C/probe LEV.S/CONN x4 ADLASM0C Suction nozzle TA (00/000l H40) GLVT C/probe LEV.C/CONN x4 HIRSHMANN ADLASM0B Suction nozzle TA (00/000l H40) GLVT C/probe LEV.C/BNC x4 BNC

39 Chemical Dosing Equipment ADOS Preassembled skid, composed by chemical tank, dosing pump, support, suction lance, mixer (automatic or manual). To be specified during order. CREATE YOUR KIT + Support Pump+bracket ADBAS00 Mixer Uncovered tanks Tank Suction nozzle Additional list for assembly 4

40 ADSP600 ADSP6006 Wall mounting bracket (HC ) Wall mounting bracket (TECHNOPOOL) ADBAS00 Foot mounting bracket (HC ) ADSTF00 Foot mounting bracket (HC ) MEASURE LENGHT ADSP PE delivery tube m ADSP PE delivery tube 6x m (00 min.) ADSP PE delivery tube 0x4 m (0 m min.) MEASURE LENGHT ADSP PVC crystal bleed of tube PVC crystal suction tube m ADSP PVC crystal bleed of tube PVC crystal suction tube 6x m (00 min.) CONNECTION MATERIAL ADSP60000 foot valve (HC ) PTFEVT CONNECTION MATERIAL ADSP6000 injection valve M / Gas (HC ) G/" PTFEVT ADSP injection valve M / Gas (HC999 Mod.) G/" 6x PTFEVT

41 Chemical Dosing Equipment CONNECTION MATERIAL ADSP foot valve (HC0) GLVT ADSP foot valve (HC999) 0x4 PVCGLVT CONNECTION MATERIAL ADSP injection valve M / Gas (HC0) GLVT ADSP6000 injection valve / (HC999 Mod. ) 6x GLVT ADSP60000 injection valve PVC (HC999 Mod. 4) 0x4 PVCGLVT ADCAN Injection fitting extension quill. PVC double thread / / GM/ GF ADSP Anchors and screws CONNECTION ADSLG ASL CONNECTION ADSLG ASL HIRSHMANN CONNECTION ADSLG4 ASL BNC 6

42 DESCRIPTION CABLE LENGHT m ADELTPH0 ApH ADELTPH0 ADELTPH0 ADELTRX0 ADELTRX0 ADELTRX0 Combination ph/rx electrodes. With bonded cable. Epoxy body. Max pressure BAR. Max temperature 40 C. ApH ApH 0 ARx ARx ARx ADELTPH0 ADELTRX0G ARx Gold ADELTRX0 ADELVPH ADELVRX DESCRIPTION Combination ph/rx electrodes. Glass body. Max pressure BAR. Max temperature C. AVpH AVRx ADELVPH ADELVRX DESCRIPTION ADELH Combination ph/rx electrodes. Epoxy body. APpH ADELPRX Max pressure BAR. Max temperature 40 C. APRx ADELH ADELPRX DESCRIPTION CABLE LENGHT m ADCV0 ACV ADCV0 ACV.. ADCV0 Coaxial cable for use with ACV ADCV0 electrodes with a BNC/SN6. ACV 0 0 ADCV ACV ADCV0 ACV 0 0 ADCV 7

43 Chemical Dosing Equipment USE RANGE ppm ADCG Ptcu amperometric probe for free chlorine Inorganic chlorine 00 ADCGF Ptcu amperometric probe for free chlorine + flow + probe Inorganic chlorine 00 ADCG6F Ptcu amperometric probe for free chlorine + flow + probes Inorganic chlorine 00 ADSP Replacement kit for ptcu electrode ADSP Balls replacement kit USE RANGE ppm ADELCLJ0 Amperometric probe for free chlorine reading ADELCLJ Amperometric probe for free chlorine reading low ph influence ADELCLJ Amperometric probe for free chlorine reading low ph influence ADELCLJS Amperometric probe for free chlorine reading low ph influence ADELCLJ Amperometric probe for total chlorine reading low ph influence ADELDCJ0 Amperometric probe for chlorine dioxide reading ADELOZJ0 Amperometric probe for ozone reading ADELPXJ0 Amperometric probe for hydrogen peroxide reading ADELPAJ0 Amperometric probe for peracetic acid reading ADSP6000 AJ connection cable Inorganic chlorine 0 Inorganic chlorine 0 Inorganic chlorine 0 Organic chlorinesalt water 0 Total chlorine 0 Chlorine dioxide 00 Ozone 00 Hydrogen peroxide 000 Peracetic acid 000 DESCRIPTION VALUE ADSPH4 ph 4 ph ADSPH7 ADSPH9 Buffer solution ph ph 7 ph 9 ph ADSRX Rx 47 mv CONNECTION MATERIAL RANGE COMPATIBILITY C ADSTS00 ADSTS00NC ADSP Probe body PVCelectrode AISI PT 00 probe body PVC Oring for adaptator (ADSP40006) MG /" DN MG /4"FG /" PVCAISI PVC PVC ADIN0S AR0S AESTART ADSP0070 Oring for adaptator (ADSP40006)

44 DESCRIPTION CONNECTION ADSP SINGLE modular probe holder, Module with filter flow sensor water check temperature G /"0x4 ADSP60000 ADSP60000 componible up to module, PVC body, seals, Module for electrode AEL Module for electrode AJ ADSP ADSP60000 ADSP max pressure BAR, Module for threaded electrode PG, A0R00 working termperature 60 C. 40 micron replacement filter cartridge ADSP60000 ADSP A0R00 DESCRIPTION CONNECTION ADPSM097 ADPSM0 COMPLETE modular probe holder, componible up to module, PVC body, seals, max pressure Modular probe holder with filter x AEL GF / Modular probe holder with filter Flow sensor x AEL ADPSM06 BAR, working termperature 60 C. Modular probe holder with filter Flow sensor x AJ G /"0x4 G /"0x4 G /"0x4 ADPSM097 ADPSM06 ADPSM0 DESCRIPTION PIPE DIAMETER MATERIAL CONNECTION ADPSTC Collar injection probe holder in DN 06 VLVT 9

45 Chemical Dosing Equipment X DESCRIPTION ADSP60007 ADSP60007 ADSP6000 ADSP60004 Connection kit for modules 0X4 pipe connection kit G / 0X4 tube kit 4 mt. X ADSP6000 ADSP60004 DESCRIPTION PIPE DIAMETER CONNECTION ADSP6000 ADSP6000 Threaded T collar for pipes DN 0 DN 6 G /". G /" DESCRIPTION PIPE DIAMETER CONNECTION ADPST Threaded probe holder phrxømm G / CONNECTION ADPSD ADPSD Modular probe holder with phrx probes compatibile Modular probe holder with phrx probes compatibile G /" 4X6 G /" 0X4 LENGTH ADPSI0 ADPSI0 ADPSI ADPSI0 ADPSI0 Immersion probe holder for phrx probe Immersion probe holder for phrx probe Immersion probe holder for phrx probe Immersion probe holder for phrx probe Immersion probe holder for phrx probe m 0.. DESCRIPTION ADFLA Flange for immersion probe holder 0

46 DESCRIPTION ADSP ADSP Panel 00x600 ABS embossed grey Panel 600x60 ABS embossed grey ADSP ADSP DESCRIPTION ADSP Drawer buffer solutions DESCRIPTION ADSP Cover mm 4x ABS embossed grey DESCRIPTION ADSP ADSP60006 Selftapping screw Ø 4.X6 Seal expanded rubber mm 46x6 DESCRIPTION CONNECTION ADFV ADFV A40000 " water filter fitted with 0 micron net cartridge. Black head, trasparent SAN sump " water filter fitted with 0 micron net cartridge. Black head, trasparent SAN sump RLA cartridge 0 MICRON G /" 4 x 6 G /" 0 x 4

47 Chemical Dosing Equipment ACON Threaded Water Meters with pruise output. TECHNICAL FEATURES Gauge Size DN Qmax max. flow rate (CEE) QN Nominal flow rate (CEE) Minimun Flow Qmin (CEE) Minimun Working Temperature Max Working Pressure Pulse emitter mm /h /h l/h C BAR imp/lt (k=0.) DIMENSIONS ADCONRC00 ADCONRC0 ADCONRC0 ADCONRC0 ADCONRC04 ADCONRC0 CONNECTION D DN Qn PN L I mm mm mm /" /4" /4" " " /4" /" " /4" /" " /" CONNECTOR INOUT PULSES FLOW RATE /h ADCONRC00 HIRSMANN G /" 4 IMP/lt. ADCONRC000B BNC G /" 4 IMP/lt. ADCONRC0 HIRSMANN G /4" 4 IMP/lt. ADCONRC0B BNC G /4" 4 IMP/lt. ADCONRC0 HIRSMANN G " 4 IMP/lt. ADCONRC00B BNC G " 4 IMP/lt. ADCONRC0 HIRSMANN G /4" 4 IMP/lt ADCONRC00B BNC G /4" 4 IMP/lt ADCONRC04 HIRSMANN G /" 4 IMP/lt 0 ADCONRC040B BNC G /" 4 IMP/lt 0 ADCONRC0 HIRSMANN G " 4 IMP/lt ADCONRC00B BNC G " 4 IMP/lt

48 6 F LOATING DISPENSERS For trichloride tablets. CL0 DOSAGE REGULATOR LOADING CAPACITY CL0 CL0 CL CHLORINE FEEDER CL00F Inline: With direct pipe connections of." inside and " outside CL0F Offline: for bypass connections via flexible tubing, with fittings. CL00F Inline: With direct connections of." inside and " outside. CL0F Offline: For bypass connections via flexible tubing, with fittings. LOADING CAPACITY HEIGHT CL00F CL0F CL00F CL0F