Piston Ring Compressor. Piston Ring Groove Cleaner Valve Spring Compressor 75mm-165mm Valve Spring Compressor Offset Jaws

Transcription

1 MECHANICAL SERVICE

2 Piston Ring Compressor n High grade spring steel n Accommodates all rings in one go n Self-locking ratchet pawl prevents premature release and provides a positive locking action n Friction-proof band makes for a smooth and accurate operation Part No. Height Capacity mm 53mm-125mm (2-5 ) mm 60mm-175mm (2 3 /8-7 ) Piston Ring Groove Cleaner n Suits both SAE and Metric n Two easy-to-set cutters included n Sharp steel cutter removes carbon and varnish n Fits 51mm-127mm (2 to 5 ) pistons n Three six sided cutters cover all major piston grooves, SAE or Metric n SAE 1/16, 5/64, 3/32, 1/8, 5/32, 3/16 1/4 n Metric 2.0, 2.5, 3.0, 4.0, 4.5mm n Metric 1.2, 1.5, 1.8, 2.8, 5.0, 5.5mm Valve Spring Compressor 75mm-165mm Engine n Universal model with strong adjustable cam-action parallel lift and automatic locking mechanism n Suits small to medium overhead valve engines n Capacity 75mm-165mm, throat clearance of 150mm Valve Spring Compressor Offset Jaws n For larger engines, two sets of jaws included n Capacity: offset jaws 55mm-165mm, straight jaws 75mm-185mm n Throat clearance 245mm n Heavy gauge steel construction suitable for deep-seated valve springs n Straight or offset slim jaws allow maximum access when removing or replacing valve collets 129

3 Valve Spring Compressor Multi-valve n Reversible jaw adaptor for multi-valve engines n Capacity 45mm-145mm n Throat clearance 250mm n Dual sizes in 25mm and 30mm diameter n Unique direct action compressor lever provides improved visibility in areas of confined access Valve Spring Compressor for OHC Engines n Reversible jaw adaptor for multi-valve engines n Capacity 75mm-140mm n Throat clearance 150mm n Automatic locking enables hands free operation n May be used on OHC and a wide range of CVH engines n Universal model with fixed jaws. Cam action provides a parallel lift Valve Spring Compressor Engine n Ideal for side valve applications such as Briggs & Stratton n Turning the knob compresses the valve spring and releases the collets n Solid construction, 230mm overall length Overhead Valve Spring Compressor n Long offset jaws for high performance engines n Removes valve springs on most OHV engines without needing to remove the cylinder head n Slim line construction with T-handle operation Overhead Valve Spring Compressor n For use on a wide range of OHV, OHC and CVH engines n Allows valve springs and valve stem oil seals to be replaced without removing the cylinder head n Features a reversible jaw/adaptor and automatic cam-action locking to a pre-determined setting 130

4 Hydraulic Valve Lifter Puller n Tool inserts through the push rod hole and expands inside the lifter, clamping strongly on the tappet walls n Pulling on the remover knob allows safe removal of the lifter n Overall length of 280mm, capacity 13mm-19mm Valve Lappers n Hardwood handles for easy hand lapping of engine valves n Two neoprene cups on handle (Single) n Resistant to grease, petrol and oil Part No. Cup Size Overall Length mm x 35mm 200mm mm x 21mm 200mm 28mm x 35mm 200mm (Pair) Ford Cam Positioning Tool n Locks onto the camshaft to prevent rotation during service n Suitable for setting cam timing, timing belt installation or valve train service Engine Camshaft Holding Tool n Designed to hold and manipulate the cam drive pulley on Ford Mondeo Zeta/Zetec engines n The tool fits into the camshaft spokes enabling it to move accurately for alignment and tension n Assists belt tensioning Rear Main Seal Tool n Removes and installs upper main bearing seals without needing to drop the crankshaft n Steel fingers hold seal firmly while piano wire and handle provide smooth, flexible pulling for fast and easy change of bearing seals 131

5 Compact Compression Tester n 63mm diameter gauge with colour coded, quadruple calibration 0-300psi, 21kg/cm, 21 bar and 2100kpa n Universal, durable rubber cone adaptor, fits all plug holes. Push in fit n Checks for worn or defective rings, pistons, valves and cylinders Petrol Engine Compression Tester Kit n 63mm diameter gauge with colour coded, quadruple calibration 0-300psi, 21kg/cm, 21 bar and 2100kpa n 315mm durable rubber hose with 14mm/18mm adaptor n 150mm heavy-duty stem with universal rubber cone suits all plug sizes n Convenient pressure-holding side release valve n Provides accurate readings on high performance vehicles Harmonic Balancer Remover n 8 tonne capacity puller kit with dual extension rods that accommodates varying crankshaft lengths. The rods of 100mm and 185mm fit inside the forcing screw to provide the size variations n Three flexible arms with hook ends cater for tri spoke harmonic balancers n Suitable for Chrysler, Ford, GM V8 s and Mitsubishi Engine Petrol Engine Compression Tester Kit n Comprehensive kit designed for petrol engines with M10, M12, M14 and M18 spark plug ports n Comes complete with various extensions and thread chasers along with applicable seal replacements and a spare pressure blow-off valve n Checks condition of valves, piston rings, gaskets and cylinder heads n Suitable for cars, vans, 4WDs, motorcycles and stationary engines n Operator manual included Part No. Description Extension Applications Gauge & Hose Assembly Thread Chaser M14 & M Thread Chaser M10 & M Extension M10 (65mm) For use on motorcycles Extension M12 (65mm) For use on motorcycles Extension M14 (70mm) Extension M14 (100mm) Extension M18 (65mm) Kit (8 x seals, pressure relief valve) For use on engines with deep seated plug ports and where access is limited Units may be used individually or joined together where a longer extension is required 132

6 Engine Oil Pressure Testing Set n Fully functional, quality testing unit which provides trade professionals with the perfect solution to diagnosing worn oil pumps, pressure switches and oil warning indicators n Large 80mm diameter gauge with dual scale psi (0-10) bar n Snap coupling adaptors with shut-off valve allow for speed and safe operation n Permanently oil primed, long (1300mm) flexible pressure hose and blow-off valve n Superior modern design, compact and organised. Ideally suited for use by the trade on a wide range of vehicles and stationary motors n Snap couplings provide for fast and efficient testing. The adaptor permits excellent subsidiary access to hard to reach areas n Operator manual included Part No. Description Gauge & Hose Assembly Adaptor R1/8 DIN Adaptor 1/8 x 27 NPT Adaptor 1/4 x 18 NPT Adaptor 3/8 x 20 UNF Adaptor 1/2 x 20 UNF Adaptor M10 x Adaptor M12 x Adaptor M14 x Adaptor M16 x Adaptor M18 x Adaptor 90º Elbow Applications: Engine Alfa Audi BMW Citroen Daihatsu Fiat Ford Honda Holden Hyundai Isuzu Jaguar Lada Lancia Mazda Mercedes Mitsubishi Nissan Opel Peugeot Renault Saab Skoda Subaru Suzuki Toyota Vauxhall Volkswagen Volvo 133

7 Diesel Engine Compression Tester Car n Comprehensive kit for checking compression on both direct and indirect diesel injected engines n Also ideally suited to marine and industrial engines n Checks engine compression whilst cranking n Built-in pressure release enables complete testing without having to disconnect from the engine n Small profile, snap release coupling system n Dual scale 100mm gauge PSI and 0-70 bar n Flexible hose provides easier access within confined spaces n Operator manual included Part No. Type Description Gauge & Hose Assembly OAL 560mm x Gauge Dia.100mm, Scale 0-70 BAR (0-1000PSI) Hose Assembly OAL 420mm Glow Plug Adaptor M10 x OAL 74mm Glow Plug Adaptor M12 x OAL 54mm Glow Plug Adaptor M14 X OAL 72mm Glow Plug Adaptor M10 x OAL 119mm Glow Plug Adaptor M10 x OAL 114mm Dummy Injector OAL 114mm - 21mm OD Stanadyne Dummy Injector OAL 112mm - 19mm OD Dummy Injector M24 x OAL 64mm Dummy Injector DM20 x OAL 75mm Replacement Seal & Washer Set Clamping Plate 64 x 25 x 17mm Engine Applications: BMW Citroen Dacia Daihatsu Fiat Ford Holden Isuzu Land Rover Mazda Mercedes Mitsubishi Nissan Opel Peugeot Renault Rover Seat Toyota Vauxhall Volkswagen Volvo Diesel Engine Compression Adaptor Set (CVS) n Easy and economical conversion for your current Toledo Diesel Engine Compression Tester to cover commercial applications n Compression gauge set to enable more comprehensive compression testing on a wide range of commercial trucks, tractors, some marine and industrial type engines 134 n Operator manual included Part No. Description Centre Pillar OAL 185mm Int. Thread 5/16 x 24UNF Ext Thread 1/2 x 20UNF Spacer Set five piece End Adaptor OAL 30mm x Ext Diameter 20mm End Adaptor OAL 32mm x Ext Diameter 24mm End Adaptor OAL 41mm x Ext Diameter 24mm Replacement Seal and Washer Set Clamping Plate OAL 64mm x W 25mm x Hole Diameter 17mm Clamping Plate OAL 76mm x W 25mm x Hole Diameter 17mm Adaptor 90º Elbow x OAL 54mm

8 Diesel Engine Compression Tester Commercial n Comprehensive kit for checking compression on both direct and indirectly injected diesel engines n Also suited to marine and industrial engines n Checks engine compression whilst cranking n Built-in pressure release enables complete testing without having to disconnect from the engine n Small profile, snap release coupling system n Dual scale 100mm gauge PSI and 0-70 bar n Flexible hose provides easier access within confined spaces n Operator manual included Part No. Description Gauge & Hose Assembly OAL 560mm x Gauge Diameter 100mm, Scale 0-70 BAR (0-1000PSI) Centre Pillar - OAL 185mm - Int. Thread 5/16 x 24UNF - Ext Thread 1/2 x 20UNF Spacer Set - five piece End Adaptor OAL 30mm x Ext Diameter 20mm End Adaptor OAL 32mm x Ext Diameter 24mm End Adaptor OAL 41mm x Ext Diameter 24mm Replacement Seal & Washer Set Clamping Plate OAL 64mm x W 25mm x Hole Diameter 17mm Clamping Plate OAL 76mm x W 25mm x Hole Diameter 17mm Adaptor 90º Elbow x OAL 54mm Hose Assembly OAL 420mm Applications: Carbodies Daihatsu Fiat Ford Isuzu International Kenworth Leyland/DAF Mack Mazda Mercedes Mitsubishi Nissan Volvo Belt Tension Tester Engine n Tests belt tension on all styles of belts including fanbelts, ribbed, toothed, grooved, v-belts and timing belts n Place belt between the roller pins and pressing tip. Then, turn the T-handle to check the belt tension Timing Belt Tension Gauge n Measures belt tension on new and old belts n Measures the load and enables the adjustment of the tension on cam belts n Suits various belt thicknesses Water Pump Pulley Remover n Ensures locking of water pump pulleys on VW and Audi engines with air conditioning n Safely locks the water pump pulley when loosening stubborn bolts 135

9 Serpentine Belt Set n Enables easy access for removal and replacement of serpentine belts that require release of the spring tensioner on the tensioner pulley Part No. Description Ratchet Wrench Extension Handle /8 Sq Drive Adaptor /2 Sq Drive Adaptor mm Hex Bit mm x 8mm Hex Bit mm x 6mm Hex Bit mm Socket Part No. Description mm Socket mm Socket mm Socket mm Socket mm Socket mm Socket /8 Socket Main Bearing Oil Seal Remover n Designed to replace rear main bearing oil seals on 6cyl 3.8L G.M. Commodores Main Bearing Housing Aligner Set n Aligns housing when replacing rear main bearing oil seals on 6cyl 3.8L G.M. Commodores Engine Ford Lifter Bleed Down Tool n Designed to bleed down lifters when checking valve clearances on Ford 5.0L V8 engines n Suits early and late models Engine Hanger Support n Supports engine during suspension, sub-frame repairs and gearbox servicing n Heavy duty rubber support feet rest on guard bolt fixing channel and eliminate damage to paintwork n Holding weight capacity 450kg (1000lbs) Part No. Description Engine support bar Stud Adjustable nut with washer Yoke, screw & hex nut Engine support foot Adjustable knob & washer Chain 136

10 Transmission Fluid Retaining Tool n Prevents ATF or gearbox fluid leaking during service after tail shaft removal by inserting the retaining tool n Suits most vehicle transmissions and gearboxes n Eliminates fluid spillage and replacement when servicing clutches, universal joints etc Universal Clutch Aligning Tool n Designed for late model front wheel drive vehicles, without a pilot bearing in the flywheel n Ensures assembly and alignment of clutches n Compact, lightweight construction enables workbench assembly and alignment n Suitable for vehicles to 5 tonnes using a single dry clutch plate Transmission Pressure Tester Kit n Quality gauge & adaptation system designed to cater for a wide variety of automatic transmissions n Adaptors/fittings are available as sets detailed in the table (Sets , ) n Operator manual included Part No. Item Code Description A Pressure Gauge & Hose Assembly (100 psi = 7 bar) B High Pressure Gauge & Hose Assembly (0-500 psi = 35 bar) C Adaptor Hose (1/8-27 NPT) (Set includes one of each) (Set includes one of each) M K J N D L Adaptor (1/8-27 to 1/4-18 NPT) Adaptor (1/8-27 to 1/8-28 BSPT) Adaptor (1/8-27 to M10-1.0) Fitting 1/ º Elbow Fitting 1/8-27 Nipple 50mm long Spare Seal Kit Fitting 1/8-27 Coupling I Adaptor 1/8-27 to M8-1.0 H Adaptor 1/8-27 to M G Adaptor 1/8-27 to 5/16-24 NPT F Adaptor 1/8-27 to 1/16-27 NPT O Fitting 1/ º Elbow E Adaptor 1/8-27 to suit VW Audi Transmission Engine & Gearbox Clutch Aligning Tool SAE/Metric n Aligns single disc clutches on cars, light commercials and tractors n Tapered cone fitting aligns clutch plate, complete with seven adaptor fittings Part No. Description Shaft Handle Tapered Cone Adaptor 15mm inch dia Adaptor 16mm inch dia Adaptor 17mm inch dia Adaptor 19mm inch dia Adaptor 20mm inch dia Adaptor 21mm inch dia Adaptor 25mm inch dia 137

11 Fuel Line Disconnect Set 3 Piece n Designed to remove quick release fittings on fuel lines of popular vehicles n Suits 6, 8 and 10mm (1/4, 5/16 and 3/8 ) fuel lines Fuel Line Coupling Release Set n s special quick connect couplings on fuel feed & return lines n Simply place the tool around the fuel line and push into the female connector to release the male connector n Contains two sizes 8mm & 10mm (5/16 and 3/8 ) Fuel Disconnect Tool Set 3 Piece n Specially designed tool set for safe and easy removal of quick connect fuel lines without damage n Suitable for late model GM Commodore, Astra, Vectra, Ford, Chrysler and Mitsubishi vehicles n Clip over the connector and release the spring lock Fuel Fuel Line Quick Disconnect Tool n Scissor type operation for spring lock couplings n Durable, lightweight metal construction n Releases 5/16 and 3/8, fuel line locking on Chrysler, Ford, GM and Mazda vehicles Fuel & Air Conditioning Disconnect Tool Set n This four piece set services most types of quick-disconnect fittings used on Chrysler, Ford and GM vehicles Description Chrysler/ Ford/ GM fuel line disconnect tool Ford fuel line coupling tool Ford/GM quick-disconnect coupler tool A.C & fuel line spring lock coupling tool Carburettor Adjusting Tool n Suits idle screws on Chrysler & GM vehicles n Four adaptors stored in the hollow handle include: Double D for GM 1979 onwards, 1/4 hex for GM 1978 onwards, 3/32 hex for Chrysler 1978 onwards, 4.5mm hex for GM 1978/9 n Heavy-duty flexible shaft for easier access 138

12 Noid Light & IAC Signal Test Set 10 piece n The most economic way to check electronic fuel injection (EFI) and idle air control signals n Works fast & easily checks Fleet PIN, Ford TBI, GEO TBI, Bosch PFI, Bosch 2, GM TBI, GM Multitech, GM PFI, GM SCPI and GM Square 4 pin, GM Flat 4 pin n Simply disconnect the fuel injectors, plug the noid light into the injector wiring harness, and then crank the engine. A bright LED flash indicates signal operation n Noid Lights and IAC Signal Test Lights are also available individually Part No. Description Noid Light suits Bosch PFI (round pins) Noid Light suits Ford TBI Noid Light suits GEO TBI Noid Light suits GM TBI Noid Light suits GM PFI Noid Light suits GM SCPI Noid Light suits Bosch Noid Light suits GM Multitech IAC Signal Test Light Sq 4 Pin IAC Signal Test Light Flat 4 Pin Prof. Vacuum & Fuel Pump Pressure Tester Fuel n Large diameter 90mm gauge with colour coded easy-reading scales n Extra long heavy duty rubber hose (1.2m) and 14/18mm manifold adaptors n Test for worn or defective parts in mechanical fuel pumps and vacuum systems n 0-30Hg (0-70cmHg) Vacuum psi (0-1.1Kg/cm 2 ) Pressure Fuel Tank Retaining Ring Remover n Removes and replaces fuel tank retaining rings n Range mm n 24mm hex drive 139

13 Fuel Injection Pressure Tester Kit n Checks fuel delivery pressure. Pressure outside manufacturers specifications will result in poor engine performance, difficult starting (hot and cold) backfire, missfire, high fuel consumption and incorrect CO levels n Comprehensive set for mechanical and electronic fuel injection systems n Pinpoints problems in filters, lines and regulators n Complete with assorted hoses, banjo bolts, hose barb fittings and unions necessary to adapt to early and later model vehicles n Item codes refer to the adaptors/fittings and are marked either on the product or storage case, or both. Adaptors/fittings are only available as sets detailed below. Sets , , , n Operator manual included Fuel Part No. Item Code Description Pressure Gauge 0-50 PSI (0-3.5 Bar) Pressure Gauge PSI (0-7 Bar) Pipe Plug 1/4 x 1/4 (6mm x 6mm) 19 Hose Barb 5/16 x 1/4 NPT 20 Hose Barb 1/4 x 1/4 NPT 7 Adaptor Ford Spring Lock 3 Adaptor 1/4 (6mm) NPT Tee with Valve 6 Adaptor T.B.I. GM 4 Adaptor GM Quick Connect 5 Adaptor GM 2.2K 8 Adaptor Ford Hair Pin - Adaptor Hose 13 (325mm) Ford - Hose Bleed-Off - Hose Bosch C.I.S (27 1 /2-698mm) - Hose 24 Basic (610mm) 22 Banjo Bolt 8mm Banjo Bolt 10mm Banjo Bolt 12mm Banjo Bolt 12mm Adaptor Honda 30 Adaptor 12mm-1.5 Male x 10mm-1.00 Male x 1 9 /16 31 Adaptor 12mm-1.5 Male x 10mm-1.00 Female x 1 1 /4 32 Adaptor 12mm-1.5 Male x 8mm-1.00 Female x 5/16 9 Adaptor 12mm-1.5 Male x 8mm-1.00 Male 14 Adaptor 12mm-1.5 Male x 8mm-1.00 Male x 3 27(A) Adaptor 12mm-1.5 Male x 5/8-18mm-1.5 Male x 1 9 /16 17(A) Union 5/ (A) Adaptor 12mm-1.5 Male x 16mm-1.5 Male x 1 9 /16 18(A) 16(A) Union 16mm-1.5 Union 14mm (A) Adaptor 12mm-1.5 Male x 14mm-1.5 Male x 1 9 /16 15(A) Union 1/4 PT Adaptor 12mm-1.5 Male x 1/4 PT- 19 Male x 1 9 /16 13(A) Hose Barb 12mm-1.5 Male x 1/4-3/8 140

14 Coolant Anti Freeze Tester n Tests all permanent (Ethylene Glycol) solutions with radiator hot or cold. Two scales display freeze point of radiator solution and the boiling point of the coolant or anti freeze - Remove radiator cap only when cool - Run engine to operating temperature - Draw up fluid to level line - Tap lightly to remove air bubbles - Top pointer must be vertical, large pointer shows degree of protection - Do not use dirty or rusty water Thermometers n Pocket style for checking fluid temperatures Part No. Dial Face dia. Scale mm Dual scale - 40 to + 71 C - 40 to F mm 0 to 220 F scale Fahrenheit Radiator Back Flusher n Connects to 13mm (1/2 ), 16mm (5/8 ), and 19mm (3/4 ) heater hose n Attaches to a common garden hose n Cleans cooling systems and heater cores without the need to dismantle or use caustic cleaning solutions Cooling Viscous Fan Hub Spanner n Removes and replaces viscous fan hubs Part No. Size Suits mm Ford 6 cylinder mm GM, Ford 8 cylinder Fan Clutch Spanner (Ford) n Special clutch holder and spanner take the hard work out of Ford water pump replacements n 1 7 /16 (36mm) & 2 5 /16 (58mm) jaw opening n 1/2 square drive fitted in tools for extra leverage 141

15 Cooling System Tester n Comprehensive kit enables testing on a wide range of cooling systems for both passenger vehicles and light commercials. The gauge is colour coded and the pump is constructed from Polyoxymethylene (POM), a high impact substance stronger than steel, yet able to withstand the corrosive factors of inhibitors. It also contains an integrated pressure blow-off valve. The automatic air inlet contains a shutdown valve, preset regulator, pressure relief valve and gauge n Adaptors fitted with quick-release couplings n High-powered, manual pressure-pump with easy to read, colour coded gauge n In line pressure regulator for easy connection to an air supply valve n Operator manual included Cooling (A) Part No. Item Code Description Gauge & Pump Assembly (A) 1(A) Gauge Airline Pressure Adaptor Radiator Blue M60 Screw Ext Audi A4, A5, A Adaptor Radiator Yellow M52 Screw Int BMW, Camira, Ford, Holden, Landrover, Opel, VW Adaptor Radiator Red M55 Screw Ext BMW Adaptor Radiator Orange M55 Screw Int BMW Adaptor Radiator Black M48 Screw Int Citroen, Fiat, Peugeot, Renault, Volvo Adaptor Radiator Black M45 Screw Int Audi, Renault, VW Adaptor Radiator Black Bayonet Neck (Adjustable Stationary Seat Housing) Adaptor Radiator Bayonet Screw Plunger (50mm) (Universal Adjustable Stationary Seat ) Combine With And Where Necessary Adaptor Radiator Bayonet Screw Plunger (35mm) (Universal Adjustable Stationary Seat ) Combine with and where necessary Adaptor Radiator Bayonet Screw Plunger (27mm) (Universal Adjustable Stationary Seat ) Combine with and where necessary Adaptor Radiator Black Bayonet Extension Combine with , , or where necessary Adaptor Radiator Black Bayonet Small Adaptor Radiator Black/Green Screw Ford EA Falcon, VE 6, 8, VZ, 6cyl, Plus Adaptor Radiator Black Bayonet Jap Ext Sml, Late Model Honda, Lexus, Toyota Adaptor Radiator Black/Green Bayonet Lge Ford (US) Adaptor Radiator Black Bayonet Jap Sml Ford, Honda, Mazda, Mitsubishi, Nissan, Subaru & Toyota Adaptor Radiator Black M62 Int Mercedes Benz (European) Adaptor Radiator Stainless Plate Spare Adaptors (Not included) BA, BF, 6cyl Ford, 8cyl Ford Steel Bayonet (STD) Suit Plastic Std Tanks

16 Radiator Cap Pressure Adaptor Set n Designed to suit the variable styles in radiator caps. Metal or plastic, screw or bayonet, narrow or standard neck fittings, internal or external. Cap adaptors are colour coded and fitted with quick-release couplings n The kit is supplied without a pressure pump and gauge assembly, Toledo , which may be purchased as a separate entity where required n Ideally complements Toledo s Cooling System Tester Part No. Item Code Description Adaptor Cap Blue Bayonet Jap Ext Sml Honda, Lexus, Toyota & late Model Japanese Vehicles Adaptor Cap Orange Bayonet Jap Sml Ford, Honda, Nissan, Mitsubishi, Subaru & Toyota Adaptor Cap Black Bayonet Std 1 5/ Adaptor Cap Orange M45 Screw Ext Audi, Renault & VW Adaptor Cap Red M48 Screw Ext Citroen, Fiat, Peugeot, Renault & Volvo Adaptor Cap Yellow M52 Screw Ext BMW, GM, Ford, Landrover, VW Adaptor Cap Green M44 Screw Ext Renault & Volvo Adaptor Cap Black M52 Screw Ext BMW Adaptor Cap Black M62 Screw Ext Mercedes Benz Cooling Gauge and Pump Assembly (not included) Radiator Fin Straightener n 6 in 1 unit cleans and straightens condenser radiator and evaporator coil fins with gaps of 8, 9, 10, 12, 14 and 15 fins per inch n Small, compact, solid grip screwdriver handle Radiator Petcock Socket Set 5 Piece n Eliminates damage to brass petcocks on radiators during radiator servicing n The sq drive angle of each socket varies to enable ease of access in confined spaces n 1/4 sq drive 143

17 Cooling System Tester Truck n The truck cooling system tester is supplied with four expanding taper adaptors to suit larger radiators in trucks, off road machinery and plant equipment n Suitable for Japanese, European and American style radiators n The gauge is colour coded and the pump is constructed from Polyoxymethylene (POM), a high impact substance stronger than steel, yet able to withstand the corrosive factors of inhibitors, thus ensuring a long service life n Operator manual included Part No. Description Gauge & Pump Assembly Expanding Taper 17-35mm Expanding Taper mm Expanding Taper 37-50mm Expanding Taper 47-60mm Cooling Air Cond. Compressor Clutch Remover Kit n Removes and replaces air conditioning compressor clutch hubs n Kit contains disc type and nut type removers n Suitable for popular compressor models including: FS6, C171, 6P and 148GM R4 & A6, HR-6, DA-6 & V5 Sanden SD505, 507, 508, 510, 575, 708 & 709 n Operator manual included Part No. Description Remover & Installer Delphi Harrison A6/R4 SAE Remover & Installer Delphi Harrison DA6V5 HR6/R4, Metric Remover Clutch End Plate Tecumseh HR Remover Clutch End Plate Sanden SD5 &

18 Tyre Valve Remover 4 way n High grade tempered steel construction n Removes the valve and the valve core on tubeless and tubed tyres n Repairs both inner and outer valve threads n May also be used to install rubber valves on tubeless rims Tyre Valve Remover 2 Piece n Durable, large handled valve core removal & replacement tools n Regular reach unit for passenger cars n Longer reach unit is ideal for truck use Wheel Weight Plier n Drop forged, heat-treated steel construction n Removes and installs wheel weights with ease n Balanced well enough to suit any operator yet heavy enough to use as a hammer Alloy Wheel Weight Plier n Drop forged, heat-treated steel construction n Removes and installs wheel weights with ease n Removable soft head and claw prevents damage to coated wheel weights or expensive wheel rims Tyre & Wheel Wheel Weight Installer/Remover Tool n Removes and replaces clip on style wheel weights n Plastic covered head eliminates damage to alloy wheels and coated wheel weights Tubeless Tyre Repair Kit n Designed to repair tubeless tyres n Contains five pieces including a spare eye hook and a spare tyre reamer, which simply screw into the unit s handle n Repair solution included 145

19 Valve Core Torque Tools n Assists in setting the recommended tyre valve torque setting as required in tyre pressure monitoring systems (TPMS) Part No. Description NCM (± 6%) 4 ins LB torque limit NCM (± 6%) 2 ins LB torque limit Way Foldable Wheel Wrench 400mm n Folds flat for easy storage n Suits 17, 19, 21mm n 1/2 square drive allows any socket size to be used in conjunction with brace n Chrome alloy drop forged steel Wheel Master Wrench Tyre & Wheel n 530mm (21 ) extension handle provides extra leverage for stubborn or rusted on wheel nuts or bolts n Unit folds up to 340mm after use for easier storage n Supplied complete with two reversible sockets 17-19mm and 21-23mm Torque Extension Bar Set 10 Piece n Converts sockets into torque sockets for applying vehicle manufacturers torque setting to the wheel nuts during wheel replacement n Correct torque is critical in preventing damage to discs, calipers and ABS computers n 1/2 sq dr colour coded sizes n Suitable for passenger cars and light trucks Part No. Description Torque Bar 90Nm Green Torque Bar 100Nm Black Torque Bar 110Nm Yellow Torque Bar 120Nm Red Torque Bar 135Nm Dark Blue Torque Bar 150Nm Orange Torque Bar 160Nm Grey Torque Bar 175Nm Brown Torque Bar 190Nm White Torque Bar 200Nm Pale Blue 146

20 Wheel Nut Socket Set Metric & SAE n Prevents damage to wheels and decorative wheel nuts n Professional quality 1/2 sq dr deep impact sockets n Thin wall deep hollow design suits performance alloy wheels n Removable plastic insert for longer nuts (3 Piece) Metric Part No. Description Socket 17mm Socket 19mm (3/4 ) Socket 21mm (7 Piece) Metric Part No. Description Socket 17mm Socket 19mm (3/4 ) Socket 21mm Socket 22mm Socket 23mm Socket 24mm Socket 27mm (5 Piece) SAE Part No. Description Socket 3/ Socket 13/ Socket 7/ Socket Socket 1 1 /16 Tyre & Wheel (7 Piece) Metric & SAE Part No. Description Socket 17mm Socket 19mm (3/4 ) Socket 21mm Socket 13/ Socket 7/ Socket Socket 1 1 /16 147

21 FWD Front Wheel Bearing Kit 24 Piece n Reduce service time with FWD front wheel bearing maintenance n This kit enables removal and replacement of the wheel bearings, with the steering knuckle and the strut assembly still attached to the vehicle n Eliminates the need for wheel alignment during bearing service n Toledo slide hammer Part Number available for additional impact n Caters for most Chrysler, Ford and GM vehicles Wheel Bearing Lock Nut Sockets n Extra deep clearance thin wall for removal of wheel bearing lock nuts n Extruded from high strength steel tube n Available in hexagonal 6pt, octagonal 8pt as well as hexagonal 6pt rounded, and octagonal 8pt rounded corner style as used on Dana axles Tyre & Wheel Part No. Socket Type Size Hexagon 6PT 2 3 / Hexagon 6PT 2 1 / Hexagon 6PT 2 3 / Hexagon Rounded 6PT 2 3 / Octagon 8PT 2 3 / Hexagon 6PT 2 1 / Hexagon 6PT 2 9 / Hexagon Rounded 6PT 2 9 / Hexagon 6PT 2 5 / Hexagon 6PT 2 3 / Octagon Rounded 8PT 2 3 / Hexagon 6PT 2 7 / Hexagon 6PT Hexagon 6PT 3 1 / Octagon 8PT 3 1 / Hexagon 6PT 3 1 / Octagon 8PT 3 1 / Octagon 8PT 3 3 / Octagon 8PT 3 13 / Hexagon 6PT 3 7 / Octagon 8PT 3 7 / Hexagon 6PT Hexagon 6PT 4 1 / Hexagon 6PT 4 3 / Octagon 8PT 4 3 / Hexagon 6PT 4 7 / Octagon 8PT 4 7 /8 148

22 Brake Fluid Condition Tester n Fast & convenient testing of brake fluid condition Tester Calibration Procedure: 1. Twist down the test probe bar to clean the two electrodes on the test bar head 2. Immerse the test bar head into new brake fluid approximately 20mm 3. Press the test button 4. Use a Phillips screwdriver to adjust the reset screw 5. Turn until the green reset indicator (far left) flashes Operating Instructions: - Check fluid at operating temperature - Insert the test probe into the master cylinder 1/3 of cylinder depth will suffice - Press the test button and observe the results on the tester s screen - There are three coloured flashing indicator levels: Green Light: Indicates fluid is in good condition Yellow Light: Indicates fluid is acceptable but changing is advisable Red Light: Indicates brake fluid is in bad condition and needs to be changed immediately n The inbuilt beeping alarm also provides an audible signal to warn of the faulty fluid NB. Brake fluid in very poor condition is prone to boiling, which poses a very dangerous situation for the driver Brake Adjusting Tool n Perfectly shaped tool to allow easy adjustment access to backing plates on drum brakes n 185mm overall length n Suitable for screw and star type adjusters Brake Brake Spring Compressor n Removes and replaces brake shoe hold-down springs n Bevelled cup fits most sizes n Notched designed for washers with ears n Knurled for firm gripping Heavy Duty Brake Spring Plier n Extra solid construction, 330mm overall length n Removes and replaces brake shoe hold-down springs 149

23 Heavy Duty Truck Brake Spring Plier n Extra solid construction, 660mm overall length n Provides the extra leverage as required for servicing hydraulic wedge type and S cam air brakes used on many trucks and trailers n Allows for servicing of even the widest brake shoes n Replaceable tip ensures long tool life Replacement Pins Part No. Description Pin Spare Single Hook Pin Spare Double Hook Brake Shoe Spreader Plier n Remove wheel cylinders or boots with this great innovation. A cable activated jaw clips onto the top of the brake shoes. By simply squeezing the plier handle, they are moved back with a ratcheting movement, allowing sufficient room to remove the wheel cylinder or cylinder boot, effortlessly n 60mm-135mm capacity with a cable length of 815mm Brake Spring Plier Truck Brake n Designed for the removal of brake springs on heavy-duty trucks and trailers. The long and powerful arms of this tool provide the leverage necessary for servicing wedge type and S cam air brakes n A claw on the longer arm engages the brake spring end allowing fast removal or replacement n 540mm overall length n Replacement pin part no Parking Brake Spring Tool n Solidly constructed tool designed for the removal and replacement of the lever cable attached to the brake shoe on cars and trucks n The jaws fit between the spring and the cable end allowing the tool to compress the spring Brake Tool Kit 7 Piece n Contains tools to suit a wide range of local and imported passenger vehicles and light commercials Item No. A B C D E F G Description Brake Spring Pliers 330mm Brake Spring Removal Tool (Fits 5/8 diameter springs) Brake Spring Removal Tool (Suitable for many imported vehicles) Brake Spring Removal Tool Brake Spring Removal Tool (Fits 3/4 and 13/16 diameter springs) Brake Adjusting Spoon Brake Adjusting Spoon 150

24 Brake Pedal/Steering Wheel Holder n Multi purpose tool, ideal for holding steering wheels firmly in place during wheel alignment testing n May be used for toe in checks and toe out on turns measurement n Trigger controlled mechanism with a thumb lock release n Also doubles as a pedal depressor to facilitate one-man brake or clutch bleeding along with cable setting on accelerator pedals etc One Man Brake Bleeder Kit n Easy to use one man brake bleeding kit with no mess n Set includes hands free, powerfully magnetised fluid connection bottle with hoses and tapered fittings Vacuum Pump & One Man Brake Bleeder Kit n Designed to help locate and identify a multitude of motor vehicle faults n Supplied complete with three connector sizes for cars, commercial vehicles and motorcycles. Die cast body with gauge and accessory kit Applications include: - Air-conditioning - Anti lock brakes - Auto transmisson vacuum modulator - Brake and clutch bleeding - Emissions, EGR valve etc - Fuel, lines, pumps, pressure regulators, tanks - Ignition timing - Vacuum systems etc Part No. Description Pump Vacuum Reservoir Brake Fluid Cup Suction Cone End Hose Set 8Pce Adaptor Bleeder Nipple Set Specifications: - Piston stroke volume 14.7 (Approximately 1 cubic inch per stroke) - Range 0 75 cm Hg of vacuum (Can hold up to 25 ins of Hg) Brake Brake Bleeder Spanners n Double end offset spanners for brake bleeder screw adjustment during service Part No. Size /4 x 3/ /16 x 3/

25 Brake Bleeder Spanner 8 & 10mm n Double ended offset spanner to open and close valves when bleeding air from brake cylinders n Strong and durable construction Vacuum Pump & Brake Bleeder Kit Professional n Comprehensive kit designed to test and service a number of automotive system functions including bleeding brake systems, vacuum testing and pressure testing fuel systems n The kit includes a metal die cast body vacuum pump and adaptors and reservoirs required for bleeding brakes and transferring fluids n Manual included to assist in servicing and diagnosis Part No. Description Vacuum/Pressure Pump Bleed Adaptors Pack Connectors Pack Connection Pipes Pack Reservoir Bottle and Pipe Small Brake Adjusting Tool n Short length for vehicles with limited access n 4-7/8 (124mm) OAL Brake Rear Disc Brake Piston Cube n Use with 3/8 drive ratchet for turning the piston back into the caliper when replacing rear pads n The tool fits six different cavity configurations n Suits most vehicle applications Brake Piston Clamp Set 2 Piece n Used to prevent brake pistons popping out of wheel cylinders while changing the brake shoes n Fits most car and truck drum brakes n Working range 29mm-82mm (1 1 /8 to 3 1 /4 ) Disc Brake Pad Remover n Designed for fast removal of disc pads n The adjustable pins slip into the disc and by hammering on the rugged grip handle the tightest of pads are soon removed n Body length 200mm, extended length 300mm Disc Brake Pad Spreader n To compress brake pistons for fast removal of disc pads n screw action pushes brake pistons to enable clear space for the prompt removal of the pad 152

26 Brake Piston Wind Back Kit 11 Piece n Comprehensive brake caliper wind back kit designed for brake pad replacement and caliper servicing n Suits most popular vehicles including: Audi, Ford, GM, Honda, Mazda, Mitsubishi, Nissan, Saab, Subaru & Toyota n Ideal set for brake specialists, independent motor workshops, panel shops and franchise dealerships Part No. Description Forcing Screw Body Forcing Plate Stepped Adaptor Push-Back: BMW, GM Commodore, Nissan, Mitsubishi, Honda, VW, Toyota, Jaguar, Mercedes Drive Adaptor Wind-Back: Ford Falcon XB, XC, XD, Fairlane ZJ, LTD FC, GM Holden HJ, HX, HZ Drive Adaptor Wind-Back: Ford Falcon EA, EB, Fairlane NA, NB, LTD DA Drive Adaptor Wind-Back: Ford Falcon XE, XF, Fairlane ZK, LTD FD Drive Adaptor Wind-Back: Mitsubishi Magna TM, TN, Nissan Pulsar Drive Adaptor Wind-Back: Nissan Pintara, Skyline Drive Adaptor Wind-Back: Mitsubishi Starion, Scorpion, Galant, Lancer, Ford Telstar, Laser, Mazda 323, Drive Adaptor Wind Back: Ford, Mazda, Saab Drive Adaptor Wind Back: Audi, Ford, Nissan, Peugeot, Rover, Toyota, VW Universal Brake Pressure Test Kit n Tests for problem areas such as leaks and restrictions, within the hydraulics of both anti-lock and conventional braking systems n Easily caters for non ABS Systems, ABS Systems, Teves Systems and Bosch-Systems using its two 3000 psi (200 Bar) pressure gauges and comprehensive adaptation system Brake n Item code refers to the adaptors/fittings and are marked either on the product or storage case, or both. Replacement adaptors/fittings are only available as sets detailed in the table. Sets , and include one of each part number n Kit is supplied with two of each bleeder screw and two gauge and hose assemblies n Operator manual included Part No. Item Code Description Gauge/Manifold/Hose Assembly 1 45º Swivel Fitting 2 90º Swivel Fitting Adaptor Pressure 4 Adaptor Teves 5 Bleeder Screw 7/16-24 TPI 6 Bleeder Screw 7/16-20TPI Bleeder Screw 3/8-24TPI 8 Bleeder Screw 5/16-24TPI 9 Bleeder Screw 1/4-28TPI 10 Bleeder Screw M Bleeder Screw M Bleeder Screw M Bleeder Screw M

27 Ball Joint Separator 200mm n Fork opening of 17mm, overall length of 200mm (8 ) n Removes ball joints from vehicles Tie Rod Spreader 400mm n Tempered, drop forged steel, one-piece construction for extended life. 18mm fork, 400mm (16 ) overall length n Removes worn out tie-rods easily with leverage and hammer striking n May also be used on shock absorber links etc Ball Joint Separator 300mm n Tempered, drop forged steel, one-piece construction for extended life. 24mm fork, 300mm (12 ) overall length n Removes worn out tie-rods easily with leverage and hammer striking n May also be used to remove CV drive shafts on FWD s etc Ball Joint Separator 19mm-38mm Suspension & Steering n Heat-treated drop forged steel body and bolt n Spreads ball joints easily where space prevents direct use of fork action method n Jaw opening 19mm, maximum opening 38mm Universal Ball Joint Separator 30mm-56mm n Specially designed two-stage operation suitable for most vehicles and light trucks with ball joints in steering and suspension n Tempered steel, drop forged body and offset lever provide for excellent functional performance and long usage n Offset lever allows for maximum jaw openings of 30mm (1 3 /16 ) and 56mm (2 3 /16 ). Jaw opening 22mm n Heat treated trust bolt with steel ball insert and quick-change steel pin, provide for use in heavier applications Tie Rod End Puller n For splitting tie rod ends, anti roll bar mountings and ball joints n 46mm Fork n 100mm Reach 154

28 Universal Ball Joint Puller 19mm-38mm n Heat treated drop forged steel body and bolt n Forces ball joints where space limits direct removal method n Jaw opening 19mm to 38mm maximum n Professional tool with inbuilt handle for easier manoeuvering Tie Rod, Ball Joint, Pitman Arm Kit 5 Piece n Heat-treated drop forged alloy steel forks in sizes of 18mm, 24mm and 29mm n Supplied with two handles, one for hammering and the other for use with an air hammer (Parker shank.0401 ) n All forks are threaded to interchange with either handle for the swift removal of tie rods, ball joints, pitman arms etc Universal Tie Rod End Tool n Easy to use cup type puller suited to most FWD cars n Tool inserts between the tie rod end spindle and the tie rod n When the forcing screw is tightened, pressure exerted on the spindle causes it to pull free of the tie rod n May be used with tie rod ends in drag link and steering arm applications Suspension & Steering Outer Tie Rod End Puller n Virtual one-handed operation to secure the puller to the outside tie rod end. 125mm overall length n Removes the most stubborn tie rods FWD or RWD and cast or stamped steel steering knuckles n Designed to snap the tie rod free of the steering knuckle without incurring any damage n Versatile tool with multiple uses for the removal of bearings, gears or pulleys Universal Tie Rod Tool n Double-ended design turns tie rod sleeves 360 in confined spaces n Fits most passenger cars and trucks with tie rod sleeves 155

29 Pitman Arm Puller 33mm-60mm n Heat treated drop forged yoke and heavy duty centre screw n Ideal for the removal of pitman arms n 33mm (1 15 /16 ) opening with 60mm (2 1 /2 ) depth Universal Pitman Arm Puller n Suitable for most cars and light trucks n Fully adjustable heavy-duty jaws n Specially shaped drop forged jaws adjust to fit the job correctly n Clamping bolts lock jaws in position to ensure a positive grip with no slippage n Overall length 150mm, maximum opening 65mm, maximum throat depth 85mm Tie Rod and Pitman Arm Puller n Designed specially for compact cars Suspension & Steering n Heat treated drop forged quality steel construction n Easily removes tie rods and pitman arms from smaller type vehicles n 27mm opening with 44mm depth, overall length 115mm Professional Coil Spring Compressor n Tempered chrome molybdenum steel jaws with ACME threaded lead screw n Swiftly and safely compresses coil springs on all passenger cars and light trucks n 300mm threaded rod, opening ranges of 210mm to 360mm Drop Forged Coil Spring Compressor n Drop forged carbon steel jaws and lead screws (230mm) n Both screws are heat treated to ensure optimum reliability and performance n Designed for use in limited space under wheel arches n Jaws designed to wrap around spring coils, thus ensuring maximum safety n Maximum jaw opening of 300mm 156

30 Macpherson Strut Spring Compressor n Specialty tool for all those vehicles equipped with Macpherson struts n Rapidly compresses the coil spring to allow replacement of shock absorbers, spring sets, the repair of bent struts and damaged spindles n Double ended jaws with security hooks to provide for safety and performance Extra Long Coil Spring Compressor Set n Comes complete with two lead screws, 300mm and 400mm plus a driving ratchet handle, 150mm extension bar and small jar of lubricant n Everything you need to make easy work of removing and installing coil springs on most cars and trucks n Supplied in a heavy-duty storage tray and metal case Coil Spring Compressor n Macpherson coil spring compressor enables rapid removal of coil springs n Supplied with three size shoes to cover the various spring diameters Replacement Parts Part No. Description Compressor Body Shoe Small 65mm x 125mm (One Piece) Extension Piece Shoe Large 126mm x 215mm (One Piece) Shoe Medium 88mm x 160mm (One Piece) Suspension & Steering CV Boot Clamp Installer n Installs low-profile clamps used to hold CV boots on most FWD vehicles n Ratcheting action and inbuilt cutter, fasten clamps swiftly and securely CV Boot Clamp Installer n Installs CV boot hose clamps with ease CV Boot Clamp Pliers n Fastens Oetiker system clamps on CV boots, fuel hoses and water hoses without damage to spring band clamps and hoses n These pliers easily replace hoses and prevent them slipping off when opening the clamp n Application: BMW, Audi, Mercedes, Opel / Vauxhall, VW, Ford, Chrysler, Honda, Mazda, Nissan 157

31 Power Steering Tester Kit n Kit enables easy diagnosis of faults in power steering pumps, boxes, gears and lines n Complete with fluid filled gauge and 13 adaptors to suit most types of power steering systems n Item code refers to the adaptors/fittings and are marked either on the product or storage case, or both n Adaptors/fittings are only available as sets and n Kit suits most popular vehicles n Operator manual included Suspension & Steering Part No. Item Code Description Length Spanner Size Gauge & Hose Assy 1/8 NPT x 5/8 SAE 460mm 12 x 17mm 1 Connector Male-Male 7/16 SAE x 3/8 BSP 39mm 16mm Connector Male-Male 7/16 SAE x 5/8 BSP 39mm 16mm (Set 3 Connector Male-Male 7/16 SAE x 18mm 44mm 19mm includes 4 Connector Male-Male 1/8 NPT x 5/8 SAE 32mm 16mm one of 5 Connector Male-Male 7/16 SAE x 5/8 SAE 38mm 16mm each) 6 Connector Male-Male 7/16 SAE x 1/8 NPT 27mm 11mm 7 Connector Male-Male 7/16 SAE x 11mm (24TPI) 26mm 11mm A Connector Male-Female 1/8 NPT x 3/8 BSP 38mm 22mm B Connector Male-Female 1/8 NPT x 5/8 SAE 38mm 22mm (Set C Connector Male-Female 1/8 NPT x 18mm 38mm 22mm includes D Connector Male-Female 7/16 SAE x 5/8 SAE 31mm 21mm one of each) E Connector Male-Female 1/8 NPT x 1/8 NPT 19mm 13mm F Connector Male-Female 1/8 NPT x 5/8 SAE 21mm 19mm Camber Gauge Magnetic 2 Piece n Set contains two easily portable, magnetic, camber bubble gauges, which attach to the wheel hub, spindle or rotor n Enables accurate camber measurement following the replacement or repair of struts, or front end parts n Overall length of 123mm with a range between 3º positive and 3º negative n Levelling thumb screw 158

32 Exhaust Donut Stretcher n Removes and installs ring-type (Donut) rubber hangers n Simply slip the tool hook through the rubber-mounting ring then push or pull to stretch, until the ring can be removed from the hook on the frame Exhaust & Tail Pipe Cutter n Vise grip handle design cuts exhaust tubing easily without needing to exert pressure n Can cut up to 2.5mm thickness & 60mm OD n Bike chain with in-built roller cutters slice into the tube as the T handle on the vise grip is activated n Replacement cutter chain part no Exhaust & Tail Pipe Cutter n Cuts thick and thin wall tube pipe from 19mm to 82mm dia n 19mm dia cutters eliminates bottoming out n 1/4 turn for complete cut n Chain should be well oiled for extended life n Replacement cutter chain part no Muffler Tailpipe & Strut Tube Cut Off Tool Exhaust n Cuts round and out of round pipes n Manually operated roller cutter wheels slice through tubing quickly and easily n Working range 35mm-64mm (1 3 /8 to 2 1 /2 ) n Replacement blade set (four) part no Medium Tail Pipe Expander n Strong and durable unit covering exhaust pipes 38mm-64mm n Re-shapes damaged or warped exhaust tubing n Suitable for use with spanner or adjustable wrench Exhaust Pipe Clamp Plier n Easily removes P.S.A. style exhaust clamps 159