HIGH PRESSURE WASHER

Transcription

1 HIGH PRESSURE WASHER

2 A masterpiece of high pressure washer based on decades of accumulative experience from users System Features Combined with both stylish design and practical values such as simplicity, toughness, durability and aesthetics Modes switchable between AUTO and MANUAL Completely new design of DIAMOND SYSTEM of Logic Circuit and Sensor, avoiding the disadvantage of traditional pressure sensor control system like starting machine frequently and repeatedly under the circumstance of pipe water leakage DIAMOND SYSTEM which is able to detect pump abnormality like running without water, then blinking red light and the AUTO (automatic shutdown) mode being locked to prevent pump from damage DIAMOND SYSTEM with yellow light alert which could blink and make AUTO mode locked in order to remind users of the need to change oil when the pump has run for 300 hours

3 Product 產品特色 Features ABS outer case which is UV-resistant and proved to be tough and durable by according to CAE analysis Open frame based on antirust concept, which makes it efficient to remove moisture as well as convenient to conduct routine maintenance Cage-shaped frame combined with springs and rubber mountings, able to effectively eliminate the noise caused by high-frequency vibration of outer case Motor baseboard bridging the tube frame, which could prevent the board from getting broken and falling off because of rustiness on welding connection Folding handle which makes it easy to be stored and transported High pressure hose quick-fit coupling which makes it easy to connect and disconnect All engine-type models are equipped with spray gun, inlet hose, high pressure hose and operation manual.

4 5.5 HP High Pressure Washer with Engine AR-RKA Series Pumps AR-RKA pumps are designed specifically for high pressure cleaning application. They are constructed of die-cast bodies and featured for a forged brass head and special thick solid ceramic plungers, which bring up their long life and durability. Product Features Using Honda GX series petro engines Equipped with RL-30 spray guns in all models of TAR cleaners Installed with inlet filter at the pump inlet Installed with indicator of insufficient oil alert High mobility due to the durable polyurethane (PU) wheels 13 HP High Pressure Washer with Engine ERS Engine Throttle Controller Reducing pump RPM when pump is in by-pass in order to reduce fuel consumption and engine wear. Prolong pump life by reducing potential fluid heat build-up. Instant ON/OFF response eliminating pressure delays at gun opening. Rated Pressure: 250 bar Actuating Pressure: 15 ~ 50 bar Rated Temperature: 90 C Stroke: 7~10 mm Coupling Type: G 1/4 M PA-B Gear Box This gearbox allows a quick, direct and compact coupling Pump-Engine unit. The gears at helical toothing, with independent lubrication in oil bath, are made in premium quality steel hardened with cementation treatment for a noiseless running and extended life. Universal flange for engine coupling to different models of engines on the market. AS-100 Easy Starter It is suitable to be installed at the inlet and outlet pipe lines of high pressure pump. Relieves pressure in pump discharge line during start-up phase. Special stainless steel seat and ball, provides thousands of low pressure start-up. Max. Flow: 30 L/min Rated Pressure: 280 bar Rated Temperature: 80 C Coupling Type: G 3/8 M Installed on models with pressure higher than 250 bar All engine-type models are equipped with spray gun, inlet hose, high pressure hose and operation manual.

5 ACCESSORIES High Pressure Hose High-pressure hose specifically designed for high pressure washer which has the inner rubber with water resistance and the outer rubber embedded with the hard steel wires possess excellent wear resistance and pressure resistance. It is suitable for clean water at room temperature. Operating Temperature : 0 ~ 80 C Rated Pressure: 220 bar for monolayer and 350 bar for bilayer We offer monolayer or bilayer high pressure hose of 5/16 and 3/8. There are 10m, 30m, 50m or other options of specified lengths.. The hose will include standard coupling for delivery. AGV 20- Unloader Valve At gun shut off, the water flow is bypassed at reduced pressure, which could protect pump structure and relevant parts. Design of internal by-pass which leads to water inlet site directly. Max. Flow: 30 L/min Rated Temperature: 60 C Rated Pressure: 220 bar Coupling Type: G3/8 FF FP-1 Sensor of Pressure and Flow 2-in-1 The patent design of our company for sensing both pressure and flow integratively. It will provides microcomputer control panel with signal of logic judgment regarding pressure output variation and water in flow path. Max. Flow: 30 L/min Rated Pressure: 280 bar Rated Temperature: 80 C Coupling Type: G 3/8 M AGV 30- Unloader Valve At gun shut off, the water flow is bypassed at reduced pressure, which could protect pump structure and relevant parts. Max. Flow: 45 L/min Rated Temperature: 60 C Rated Pressure: 220 bar Coupling Type: G3/8 FF Microcomputer Control Panel This panel is integrated with FP-1 sensor of pressure and flow 2- in-1 into DIAMOND Automatic Shutdown System which is developed by TANONG ourselves. This system has multi-modes of control and protection, suitable for high frequency of exchange between STOP and SPRAY. VB 9- Unloader Valve Pressure regulating unloader valve with port for pressure gauge. At gun shut off, the water flow is bypassed at reduced pressure, which could protect pump structure and relevant parts. It is durable and especially suitable for heavy-load operation. Max. Flow: 30 L/min Rated Temperature: 60 C Rated Pressure: 220 bar Coupling Type: G3/8 FF Engine Adapter It is suitable to be linked to high pressure pump of AR RKA 2.88G 25KDX series and HONDA GX 5.5HP engine. RL30 Spray Gun It is durable and especially suitable for heavy-load operation. The swivel of this gun could prevent high pressure hose from being intertwined inappropriately. Max. Flow: 40 L/min Rated Temperature: 90 C Rated Pressure: 310 bar Coupling Type: G 3/8 F,G1/4F Motor-Pump Adapter It is suitable to couple various motors with NDX high pressure pump of AR RKA. RL300 Spray Gun The spray gun of RL mm tube is very durable and especially suitable to be utilized under heavy load operation. The swivel of this gun could prevent high pressure hose from being intertwined inappropriately. Max. Flow: 40 L/min Rated Temperature: 90 C Rated Pressure: 310 bar Coupling Type: G 3/8 F,M22 F Inlet Filter Light-weighted filter specific for TAR series, which could help users to judge if it is clogged via transparent case. The filtration net could stop large substances which are likely to impose damage on the parts of pump. UR25 Rotating Nozzle Light-weighted ceramic rotating nozzle, able to enhance washing and cleaning efficiency. Min. and Max. Flow: 6 ( at 80 bar )~ 29 ( at 250 bar ) L/min Rated Pressure: 250 bar Min. Operating Pressure: 80 bar Operating Temperature: 5 ~ 100 C Coupling: G 1/4 F AJN Nozzle Adjustable nozzle, the spray can be adjusted into fan-shaped or straight water column by rotating the nozzle body, pushing the rotary nozzle body forward can make it enter low-pressure state, it is suitable for suction detergent. Max. Flow: 21 L/min Rated Pressure: 220 bar Rated Temperature: 60 C Coupling: NPT 1/4 F ( TANONG provides the following specification: 035/040/045 ) Stainless Steel Tube Users could choose the SS-304 stainless steel 1/4 tube of the various lengths of 38, 50, 100 or 400mm. There are another choice of straight or bending tube at the end of nozzle ( only for 400 mm tube ).

6 TAR-B-12/120 M1 TAR High Pressure Washer of wall mounting type Specification Model Flow Rate L/min Operating Pressure bar TAR 12/120 M TAR 12/120 M TAR 12/180 M TAR 12/180 M TAR 17/120 M TAR 17/120 M Motor Power HP 3 HP 5 HP TAR 15/200 M HP TAR 15/250 M TAR 17/230 M Petrol Engine 10 HP Electrical Specification 220V/380V 60Hz TAR 12/150 E GX 160 ( 5.5 HP ) TAR 17/270 E GX 390 ( 13 HP ) Authorized Dealers