8/26/2011 1/12 QUANTITY REQUIRED DESCRIPTION GROUPE 1 - EQUIPMENT

Transcription

1 ITEM DESCRIPTION QUANTITY REQUIRED GROUPE 1 - EQUIPMENT Portable refrigerant identifier Capable of idetifying CFCs, HCFC, HFCs and HC (hydrocarbons) R 134 a adapter fiting for ACME ported cyclinders Adapter for R-134a for MAC Display ratio of refrigerant and air Complete with sampling hoses Battery charger 127 V, I phase, 6 Hz Equipped with printer Digital display and LED's Instructions manual in french Unit must includee certification in accordance with international standards as ARI, CE, UL etc Instructions will be provide in french Two Stage vacuum pump Free air displacement minimum of 2.5 cfm Must reach a vacuum of at least,5 mbar Must have a handle for carrying Lubrified with mineral oil for which max and min levels will be clearly indicated Oil level sight glass for easy oil change Able to start under a 5 mbar vacuum Supply of vacuum pump oil for each unit (4 liters per unit) Unit must includee certification in accordance with international standards as ARI, CE, UL etc Instruction will be provided in french High performence Vacuum pump Compact, two stages vacuum pump Min. Capacity 4 microns Vacuum capacity: Max 5 microns With gas ballast valve and thermal overload protection Power supply 127 V-1-6 Hz including 5 extra Lts. Oil pump Unit must includee certification in accordance with international standards as ARI, CE, UL etc Instructions will be provide in french Portable recovery unit For multiple refrigerants CFCs, HCFCs or HFCs including blends such as R44A and 1A Oil les compressor. Mininum capacity 1/3 HP 127 V - 1 phase - 6 Hz Three service hases of diferent colors 36" long, 1/4 SAE straight x 1/4" SAE 45º connections both sides, set 25 PSIG working prewssure, with shut-off or press steel ball valves Recovery rate: vapor Kg/hr; liquid 2 Kgrs/hr Overcorrent and low voltage protection, power supply cord including ground cable to avoid hazard shocks High pressure automatic cut-out and OFP switch Gauges: Units. Psig, bar, ºC/ºF (One SAE connection is reqired for micron meter Spare parts: All necessary filters minimun 1, for one year operation Unit must includee certification in accordance with international standards as ARI, CE, UL etc Instructions will be provide in french Portable vacuum and charging station Compact and moble charrging station for service of hydrocarbon and R134a refrigerants Two stage vacuum pump with a minimum 45 1/min pump and capable of micron vacuum or batter 4 8/26/211 1/12

2 5 Complete hard mounted service manifold with two compound gauges (Hydrocarbon and R134a) and one vacuum gauge Device for liquid filling of R-6a Can valve for refrigerant Complete set of 3 hose 36 in (9cm) with manual shut off valves and Working pressure over 75 Ib/sq inch. Buurst pressure of over 3 Ib/sq inc One 5 m hosefor evacuation of HC from working area Unit must includee certification in accordance with international standards as ARI, CE, UL etc. Instrutions will be provided in french Portable Oxy-acetylene soldering and brazing station including: One rechargeable white oxygen cylinder capable of withstanding a pressure of 2 bars. The valve shall be protected by a removable tulip type cover One light brown acetylene cylinder, the valve shall be protected by a removable tulip type cover One pressure regulator for oxygen equipped with a flow control valve and a high pressure ( to 3 bars) gauge and a low pressure gauge ( to 6 bars), andd connectiong hose to cylinder. One pressure regulator for acetylene, with flow control valve, and a high pressure gauge ( to 4 bars) and a low pressure gauge ( to 2,5 bars), and connecting hose to cylinder One small brazing torch handle with red and blue knobs to control the flow of acytilene and oxygen, respectively One set of interchangeable tips and tip cleaning needles Torch fitted with a flame trap of flash back arrestor and necessary connectors to receive the red and blue hoses Complete on frame with wheels Showld meet safety standards (please cleary specify standards Unit must includee certification in accordance with international standards as ARI, CE, UL etc. when responding) Instructions for the use and maintenance will be in french Soldering and brazing hand held portable torch solid metal regulator (aluminom or brass) Variable flame control knob Works with propane na MAPP Gas Meets industrial standards (ARI or others); please specify responding Instructions for the use and maintenance will be in french HP Portable Diesel Power Generator 22 volts - 5 Hz Capable of producing a minimum of 5 Watts Unit must includee certification in accordance with international standards as RI, CE, UL, etc. Instructions will be provided in french Digital Scale Min. Capacity 8 Kgs Units. Kilograms and Lbs/oz. Mechanical overload protection Minus reading when weight removed from platform Resolution min. 4 gr. Accuracy,5% Auto zero and tare function Battery operated Unit must includee a certification in accordance with international standards as RI, CE, UL, etc. Instructions will be provided in french Digital Scale (precision) Measuring range of to 2g accuracy 1g Battery operated Unit must include a certification in accordance with international standards as ARI, CE, UL, etc. Instructions will be provided in french Device for liquid filling of refriigerant including a valve 1 4 8/26/211 2/12

3 12 13 Electronic portable leak detector Detects all commonly used CFCs, HCFCs, HFCs Sensitivity 5g/year Hand held, battery operated Set of spare parts (2 tips per each unit) Instructions will be provided in french Multifunction clamp-on multimeter Identify AC and DC currents, Identify AC/DC from 2mv to 6 V and 4-4 A, Displays resistance in ohms and milli ohms Weight not more tham 45 gr includees test leads, battery and instructions in french Precision digital thermometer 4º C to + 5º preferably in ºC and ºF Battery operated Resolution,1ºC Accuracy batter than,5ºc Pocket thermometer 4º C to + 1º preferably in ºC and ºF Compressors - For Hydrocarbon gaz 1/8, 1/6, 1/5, 1/4, 1/3 HP Unit must include a certification in accordance with international standards as ARI, CE, UL, etc. Standard 3 way gauge manifold set 3-way manifold with 8 mm diameter gauges class 1 oil-filled or pulse free Psi/bar scales 1 set for CFC/HCFC scale including at least R-12/R-22/R set for HCFCs scales including at least R134a/R44A/R47liq/R47vap Set of 3 refrigerant transfer standard hoses (blue/red/yellow) with manual shut-off valves for the gauge manifold (min 35 bar) Instructions for the use maintenance will be provided in french Lbs. Recovery cylinders including dual vapor/liquid ports 1/4" SAE connections and OFP switch Yellow on top, grey on the bottom Manufactured according to DOT 4BA 4 regulations or better 1 1 Lbs Reccovery cylinders 19 including dual vapor/liquid ports 1/4º SAE connections and OFP switch Yellow on topo, grey on the bottom Manufactured according to DOT 4 BA 4 regulations or batter Laptop computer including small printer and all necessary cables Manual oil pump Allows charging oil to a system 2 5 ARI and or EPA or equivalent certified Spare parts for above equipment 22 Provide detail Each lot of spare parts shall includee consumable and useable parts in quantities as judged necessary to ernsure proper operation of equipment during the first year of operation of each unit listed above Total GROUP 1A list of spare parts will be supplied in french 2 GROUP 2 - TOOLS 8/26/211 3/12

4 23 24 Adjustable wrench set 3 piece shielded (pvc handle etc) Allen keys (hex) Sizes 1,3-1, , , , Set of 1 Keys in holder (Plastic case, ring, etc) Superposed multigrip pliers (Grouve Joint or pinching pliers) drop forged steel chrome plated Insulated vinyl cushion Clamping pliers drop forged steel chrome plated Combination wrenches chrome plated Standar set of wrenches - All sizes from 7 to 32 mm Combination wratchetting spanger chrome plated Torx elbow, º inclination 6 and 8 mm square Piercing pliers Fast refrigerant recovery plliers that clamp on and piercce tube For copper tubing from 1/4" to 7/8" OD With chamgeable piercing needle and acess fitting Pinch off pliers High carbon steel Pinches and locs on tubing (vise grip with easy release handle Long nose pliers High carbon steel Needle-nose type with serrated edges (jaws) Pinches and locks on tubing (vise grip) with easy release handle 32 Diagonal cutting pliers High carbon steel all purpose minimum 4-5" Short jaws PVC coated handles Hammer Forged steel nail hammer with straight and smooth face 1 oz head minimum Cold Chisel Safety grip 1" cutting width Saw frame and blades Heavy duty hacksaw with cushion grip handle 37 Electricians folding pocket knife 38 Tube cutters for copper and light alloys Cutter advances by rotation of knob with cutting wheel; Tube diameters: from 1/8" to 1/8" Mini tube cutter Cutter advances by ratation of knob with cutting wheel Tube diameters: minimim from 1/8" Flaring and swaging kit for copper tubes satandar set of 45º flaring and swaging tools 7 Sizes: 3/16, 1/4, 5/16, 3/8, 7/ 16, 1/2, 5/8 1 wrought steel caliper 1 wrought steel matrix 1 Universal reamer Kit case Copper, light alloys and soft steel tube benders For 3/8" tubes Portable and sturdy mechanical bender type Copper, light alloys and soft steel tube benders For 1/12" and 1/4" tubes Portable mechanical/spring bender type Valve core tool /26/211 4/12

5 Valve core remover (Schrader type) Ball valve design controls refrigerant flow with turn of lever One set of replacement valves per tool Screwdriver set all in one type (6 in1 or 1 in 1) Steel shank vinyl handle Burnished tips Assortment of philips (cross point), slotted (french) Set of adaptors for R12 1/4" x 1/4" shutoff 1/4" x 3/16" shutoff GM 1991 and later models 1/4" x 3/16" flexible 1/4 x 1/8" adaptaer Adaptor coupling for R-134a Standard refrigeration service couplings for R134aa connections Total GROUP 2 GROUP 3 - INDIVIDUAL PARTS Sight glass 1/4" male flare x 1/4" male flare Valves (ball type or isolation, flow control, security etc.) Assorted sizes Assortment of dehydrators (standar, two way, burnout) Filtrering and dehdration of refrigerant fluids; Neutralization of accids 1/4" 3/8" 5/8" Cooper tubing 1/4" x 1ft 3/8" x 1ft Copper tubing parts (coupling) Reducing coupling from 3/8 to 14" Recovery bags Aluminum coated and equipped with schrader valve Capacity of 25g (R-12/R134a) Set of 4 hoses, 3 refrigerant, one evacuation Complete set of 3 hoses 36 in (9cm) with manual shut off valves and working pressure over 75 Ib/sq inch, Burst pressure of over 3 Lb/sq inc One 5 m hose for evaacuation of HC from working area Polyamide capillary tubing assemble set Working temperature: - 4 to + 8ºC Working pressure: 3 bar 1 pes nuts NS4-4 1/4" SAE 1 pes nipples M6 with O-ring 1 pes tightening nuts M6 5 meters polyamide capillary hose Safety goggles Non fogging Lightweigt clear optical plastic Arms, or adjustable strap Protective Overalls 1 57 Safety gloves 5 Total GROUP 3 GROUP 4 - REFRIGERANTS AND OIL Drop-in blend replacement for R12 (HC) 58 Blend, in 13,5Kg cylinders (3 Lbs) 11 Case of 12 x 6 oz cans 1 59 Drop-in blend replacement for R22 (HC) Blend, in 13,5Kg cylinders (3 Lbs) 1 Case of 12 x 6 oz cans 1 6 Sealing and dessicant blends 6 oz cans Case of 12 x 4 oz Seaquick or eqquivalent 1 Case of 12 x 4 oz Duradry or equivalent Drop-in blend replacement for R52 (HC and/or HFC) Blend, in 13,5Kg cylinders R134a 13,5 Kg cylinders 1 1 8/26/211 5/12

6 63 64 Refrigerant oil (gallon) Mineral Refrigerant oil (gallon) Synthetic 1 1 Total GROUP 4 SUBTOTAL GROUP 1-4 Freight DDU/Bissau TOTAL 8/26/211 6/12

7 UNIT COST TOTAL COST 8/26/211 7/12

8 8/26/211 8/12

9 8/26/211 9/12

10 8/26/211 1/12

11 8/26/211 11/12

12 8/26/211 12/12