RecoverXLT Refrigerant Recovery Machine

Transcription

1 RecoverXLT Refrigerant Recovery Machine Liquid and Vapor Recovery Set Up Liquid recovery is the fastest method, but not all equipment can handle the process Vapor recovery is slower than liquid recovery, but is the most commonly used recovery method Liquid and vapor recovery are performed the same way, but liquid recovery requires a connection to the high side of the system Push/Pull Recovery Set Up Quickly removes liquid refrigerant, but requires hose connection change to recover vapor refrigerant Works best when recovering more than 10 pounds of refrigerant Make sure system will allow a solid column of liquid to form, does not have a heat pump or reversing valve and does not have an accumulator Single valve control for easy changeover from liquid to vapor to purge (patent pending) Constant Pressure Regulator (CPR) valve regulates refrigerant to the compressor. Eliminates the need for technician to throttle the suction valve Advanced 1/2 hp, 3425 rpm oil-less compressor with precision valves manufactured in an ISO-9001 facility Recovers refrigerant and shuts off when unit reaches 13" of vacuum. Unit will automatically restart if system pressure rises Indicator signals recovery complete Includes three-year compressor warranty Made in the USA Tested by UL to ARI # Recover XLT 115V/60 Hz BULLET 7 CFM Vacuum Pump The new YELLOW JACKET BULLET HVAC/R vacuum pump is a 2 stage, rotary vane, oil-sealed 7 CFM pump. Wide mouth oil reservoir port for easier, cleaner filling Large oil sight glass for easy monitoring of the oil level Large brass oil drain for faster oil changes and a wide-stance metal base with rubber overlay for extra stability. # CFM 115V Bullet vacuum pump

2 Max-Flow Combination Oil Pump Pump oil into the compressor on the down stroke while the system is under pressure, making pumping easier with a positive stroke. # TITAN 4-Valve Test and Charging Manifold ( F and C) With 60" PLUS II compact ball valve hoses, RYB and 3/8" x 45 Red/Blue gauges R-22/404A/410A # With 60" PLUS II RYB hoses and 3/8" x 45 Red/Blue gauges R-22/134a/404A # MANIFOLDS with 2-1/2" gauges # Manifold only, psi, R-22/404A/410A # Manifold only, psi, R-22/134a/404A MANIFOLDS with 3-1/8" gauges # R22, R404A, R410A Manifold w/5 RYB hose 2-1/2" (68 mm) Manifold Gauges ( F and C) # /2" gauge ( F), red pressure, psi, R-12/22/502 # /2" gauge ( F), blue compound, 30" psi, R-12/22/502 # /2" gauge ( F), red pressure, kg/cm 2 /psi, R-410A # /2" gauge ( F), blue compound, 30" kg/cm 2 /psi, R-410A 3-1/8" Dry Manifold Gauges ( F and C) Red and Blue # /8", red pressure, psi, R-22/134a/404A gauge ( F) # /8", blue compound, 30" psi, R-22/134a/404A gauge ( F) # /8", red pressure, psi, R-22/404A/410A gauge ( F) # /8", blue compound, 30" psi, R-22/404A/410A gauge ( F) Set of gauge boots # /2" # /8"

3 Yellow Jacket 1/4 Charging Hoses Standard charging hoses, 2500 psi minimum burst and 5000psi maximum working pressure. 1/4 Straight x 1/4 45 Angle fitting. 3 packs: 1 yellow, 1 blue, 1 red. Length Plus II Hose with SealRight Fitting Low loss anti-blow back SealRight fitting immediately traps refrigerant in the hose when disconnected, helping meet non-venting regulations and prevent finger burns. 45 SealRight fitting at one end x 1/4 Straight 3 packs: 1 yellow, 1 blue, 1 red. Length Yellow Jacket Plus II Hose with compact ball valve end. Full flow for faster recovery. Low loss fitting. Hose and ball valve rated for higher pressure psi burst and 800 psi working pressure, uses standard gasket and valve opening. 3 packs, 1 yellow, 1 red, 1 blue. Length FlexFlow and Low Loss Adapter Hoses Easy retrofitting of existing Plus II hoses with ball valve capabilities. Flexible hose between valve and fitting for handling in tight places. Length Pk. 1 yellow, 1 blue, 1 red Replacement Hose Parts: Description Gaskets: 10 pk. 1/4 hose Gaskets: 10 pk. 3/8 hose O Ring 10 pk. 1/4 Seal Right Adjust-A-Valve openers 10 pk

4 1/4" and 5/16" 4-in-1 Ball Valve Tool Vacuum valve. Extra 1/4" side port on the to attach electronic micron vacuum right at the system for greater accuracy or to add refrigerants. Working pressure of 800 psi. Core removal access. Lets you evacuate and charge through an unrestricted line for increased speed and higher vacuum. Core replacement. Recovery valve. Core removal allows recovery unit to work at maximum efficiency, speeding the recovery process. # /4 # Gaskets 1/4 # /16 for R410a # gasket kit Compact Ball Valves (1/4" and 5/16") Compact ball valves feature full flow for charging and recovery. Metal valve handle. # /4" Compact ball valve straight # /4" Compact ball valve 45 # Compact ball valves (3 pak) # /16" Compact ball valve for 5/16" Female flare x 1/4" Male flare # /16" Compact ball valve for 1/4" Female flare x 5/16" Male flare # /16" Compact ball valve for 5/16" Female flare x 5/16" Male flare SealRight Quick Couplers # /4" SealRight Str. x 1/4" Male flare # /4" SealRight 90 x 1/4" Male flare # "O" rings (10 pak) 1 # Rebuild kit # Overhaul kit with all above parts Automotive R-134a Economy A/C Couplers # Lo-side coupler with 1/4" flare # Hi-side coupler with 1/4" flare # Replacement O ring set (6 pak)

5 Heavy Duty Mini-Cutters Mini-cutters are compact yet easy to grip and feature large rollers and flare cut-off groove # Small Mini for 1/8" to 5/8" O.D. # Mini-cutter for 1/4" to 7/8" O.D. # Big Mini for 1/4" to 1-1/8" O.D. Premium Tube Cutters Wide rollers with flare cut-off groove for convenience. Wheel retracts into cutter body to save 1" in cutting radius Alloy steel wheels have a sharper cutting wheel edge for less burr on copper, aluminum and mild steel tubing Wheels are pinned to rotate in either direction without the screw backing out Fold away steel reamer with turned cutting edge for deburring # Small cutter for 1/8" to 1-1/8" O.D. # Large cutter for 1/4" to 1-5/8" O.D. Large Tube Cutters To 5-1/8" O.D. (130 mm). I beam design uses aluminum alloy for both strength and light weight. Wide body has long rollers to hold tubing and includes a flare cut-off groove Contoured handle for easy gripping also holds spare cutter wheel Separate deburr tool slides into cutter body # Tube cutter for 3/8" to 2-5/8" # Large tube cutter for 2" to 5-1/8" Tube Reamer/Burr Remover Steel blades remove inner and outer burrs. # Tube reamer - 1/16" up to 1-3/8" O.D. Tube Deburring Tool For fast deburring, rotate blade. # Deburring tool

6 Full Range Heavy Duty Tube Benders For 1/4" to 7/8" radius. Make fast bends on almost every size of soft copper, brass, aluminum, steel and soft stainless steel tubing to 180. # /4"-5/16"-3/8" 3-in-1 tube bender (Bending Radius: 15/16") # /4" tube bender (Bending Radius: 9/16") # /16" tube bender (Bending Radius: 11/16") # /2" tube bender (Bending Radius: 1-1/2") # /8" tube bender (Bending Radius: 15/16") # /8" tube bender (Bending Radius: 2-1/4") # /4" tube bender (Bending Radius: 3") # /8" tube bender (Bending Radius: 3") Swaging and 45 Flaring Tool This combination tool both flares and swages soft or annealed copper and similar materials. Six hardened and plated alloy steel adapters are interchangeable to convert sizes and functions Slip-on self-centering steel yoke has a feed screw with extra long handle Deeply knurled adapters Flaring bars are hardened and chrome plated for durability # Swage/flare kit complete 3/16" to 3/4" O.D. Punch-Type Swaging Tool Expands one end of copper tubing for connecting same size tubes Heat-treated and plated alloy steel Made in the USA # Swaging set 4 pcs. in pouch 1/4", 3/8", 1/2" and 5/8" Individual sizes: # /4, # /8 Service Wrenches Straight, Heavy Duty and Off-set service wrenches offered. Made in the USA. # Straight service wrench # Heavy duty service wrench # Off-set service wrench # Hex key adapter # service wrench and adapter

7 Deluxe 45 Flaring Tool Designed with the new R-410A system requirement in mind Self-centering yoke grips without marring or constricting tube Automatic tube height gauge for correct tubing height Multi-faceted burnishing cone produces a burnished flare seat for a positive seal Easy-to-use with four basic steps Made in the USA # Deluxe flaring tool for 1/8" to 3/4" O.D. 45 Flaring Tools Hardened steel flaring bar to resist tube slippage Forged steel yoke that slips over bar and locks with a turn Precision threaded feed screw and long handle # Heavy duty flaring tool for 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" O.D. # Heavy duty flaring tool for 1/2", 5/8", 3/4" O.D. Universal 45 Flare/Burnish Tool Universal designed bar will hold all inch and metric size tubing up to 5/8". Flare bar is compact and easy to use in tight spaces. Multi-faceted cone rolls out precise 45 flare and burnishes simultaneously. Flare is formed above flare bar. # Universal flaring tool for 3/16" to 5/8" O.D. Ratchet Hand Bender Easy one hand bending of 1/4 to 7/8 soft copper and soft aluminum. Hard copper must be annealed before bending Quick change bending mandrels and shoes Trouble free ratchet mechanism Index marks to locate bends Complete tube bender kit includes all items required to bend 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8" tubing # Spring Tube Bender For 1/4" to 7/8". Spring benders slip over soft copper and aluminum tubing during bending to help prevent tube collapse. Silver-plated finish # /4" O.D. bending spring # /16" O.D. bending spring # /8" O.D. bending spring # /2" O.D. bending spring # /8" O.D. bending spring # /4" O.D. bending spring # /8" O.D. bending spring # Set 6 sizes 1/4", 5/16", 3/8", 7/16", 1/2" and 5/8" O.D. # Set 4 sizes 1/4", 3/8", 1/2" and 5/8" O.D.

8 Folding hex key set.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32 Part# Piece hex key caddy set LLK7 8 pc. set T handle hex keys with pouch. 3/32 through 5/ Adjustable wrench, plastic dipped handles. D D D D D Stubby nut drivers SS8 1/4 SS10 5/16 SS12 3/8 Cushion grip screwdrivers Heavy duty /4 Tip 4 Square Shank /4 Tip 4 Round Shank /16 Tip 6 Round Shank /4 Tip 6 Round Shank /16 Tip 6 Round Shank #2 Philips 4 Round Shank Mars 6 in 1 Screwdriver - Cushion Grip Klein 10-Fold Torx Tamperproof Screwdriver/Nut Driver Folding pocket-style 10-in-1 tool with interchangeable bits - 8 screwdriver sizes and 2 nut drivers. Unfolds and locks at a 180 degree angle to provide a straight screwdriver. Blast finish steel bits provide a firm hold to the fastener to reduce cam-out. Contains 5/16" & 1/4" nut drivers, T7, T8, T9, T10, T15, T20, T25, T27 TORX TORX is a registered trademark of Acument Intellectual Properties, LLC Metal Cutting Blades: 2MS18 3 1/2 x 1/4 x.031 4MC24 6 x 3/4 x.031 9MC10 9 X 3/4 X.050 Wood Cutting Blade: 12KH8 12 x 3/4 x.049 4KH6 6 x 3/4 x.049 Plaster Blade: 4P6 6 x ¾ x.049

9 Klein 4 Electronics midget pliers tapered nose, midget jaws. D295-4C Klein Multi purpose 6 in 1 tool Shears bolts, measures stud sizes, gauges wire sizes, crimps insulated terminals, Strips and cuts AWG 1000 Klein All purpose electricians tool, two wire cutters, crimps 7-8mm insulated and non-insulated terminals, lugs and splices. Cuts and strips 8-22 AWG solid and stranded wire. Cleanly shears bolts Klein Wire stripper/cutter Spring loaded action for self opening. 6 1/4 length, strips and cuts AWG solid. Do notuse for cutting steel wire or bolts K Klein 8 Side Cutters D201-8NE Klein Crimping/Cutting Tool Non- Insulated/Insulated Connectors 1005 Klein 6 Standard long nose pliers side cutting D203-6 Klein 7 Standard long nose pliers side cutting D203-7 Klein 8 Heavy duty long nose pliers, side cutters D203-8 Klein 5 Long needle nose pliers D /2C Klein 7 Diagonal cutting pliers, heavy duty, tapered nose. D220-7 Klein 7 High leverage diagonal cutting pliers. D228-7 KleinLong-Nose Multi-Purpose Tool Easily cuts and strips wire. Cutters and strippers are in front of the pivot for maximum ease-of-use in reaching into tight places. Crimps insulated and non-insulated terminals and 7 to 8 mm ignition terminals. Cleanly shears bolts. 1010