MUST BE UL LISTED or EQUIVALENT

Size: px

Start display at page:

Download "MUST BE UL LISTED or EQUIVALENT"

Quentin Hampton
5 years ago
Views:

1 PKG MIG WELDER Rated Output: 200 Amps at 28 VDC 60% Duty Cycle or 250 A, 28 VDC at 40% Duty Cycle Max Open-Cicuit Voltage: 38 Wire Feed speed: IPM Package includes: #MMM252 (#907321) Welder Spoolmatic 30A Dual Cylinder Rack Elevated Gun and Cable Rack Regulator / Flowmeter with Hose MILLERMATIC PACKAGE # EA MIG WELDER Input AC Voltage: 208V - 230V Single Phase Output DC Amps (max): 250 Duty Cycle: VDC 60%, VDC 40% MILLERMATIC 252 #

2 EA MIG WELDER 110V Electric Requires 1-Phase power 90A at 18 VDC, 20% duty cycle Amps IPM ( m/min) MILLERMATIC 140 AUTO-SET # EA WELDING TORCH Hand-held Air Plasma Cutting 115 / 230 VAC 60 Hz Includes ICE-27C 20 foot (6.1 m) MILLER SPECTRUM 375 # EA SPOOL GUN 12 foot (3.7 m) cable Custom carrying case MILLER SPOOLMATE 100 Series #

3 EA SPOOL GUN For aluminum 200 A.023-1/16 inch ( mm) 15 foot (4.6 m) cable MILLER SPOOLMATIC 15A # EA SPOOL GUN For aluminum 200 A.023-1/16 inch ( mm) 30 foot (9 m) cable MILLER SPOOLMATIC 30A # PKG TIG WELDER Input Power: V, 3 - or 1-Phase Power Ampage range: A Rated Output: 200 Amps 20% Duty Cycle VAC 50 /60 Hz Foot pedal Complete 10 foot primary cord MILLER DYNASTY 200 DX AUTO-LINE #

4 EA MIG WELDER Input Power: Requires 3- to 1- Phase Power, VAC, 50 / 60 Hz Rated Output: V, A With Auto-Line (without 14-pin, Tweco connectors) MILLER XMT 350 VS # PKG TIG / STICK WELDER Input Power: Requires 1- Phase Power Amperage Range: A Rated Output: 150 A at 26 V, 40% Duty Cycle V, 50 / 60 Hz Synchrowave 200, No. 39 running gear, 150 amp WP1712MFD150 Weldcraft torch with quick-connect, 12 ft (3.7 M) work cable with clamp and quick-connect, electrode holder with quick-connect, RFCS-14 remote foot control with 20 ft (6 m) cord, regulator / flow gauge, gas hose and primary cord. MILLER SYNCROWAVE 200 RUNNER #

5 PKG TRACK CUTTING MACHINE WITH TRACK SECTION Portable With Rigging, Torch and Tip Cutting capacities: Length increments of 72 ; Circle diameters 4 to 96 Speed Range: 1 to 60 Inches per minute Cutting Machine MT210A Torch and Torch Rack Hose and Fittings (For Two (2) Hose Operation) 32 Pitch pinion torch holder 3 Hose Manifold Block Track Section (6 foot) VICTOR VCM200 Series (#VIC & #VIC ) 12 1 PKG PLASMA CUTTING SYSTEM Input AC Voltage: 110V, 230V Cutting capacity: 3/8 inch Maximum cutting thickness: 1/2 inch Amperage range: A to A Duty cycle: 30 Amps Cutmaster True Series 52 Power Supply 75 degree Radnor MasterCut MC60 Hand Torch with 20 lead. Input Power Cable Work Cable and Clamp THERMAL DYNAMICS CUTMASTER TRUE Series 39 #1-3840

6 PKG PLASMA CUTTER Input Power: 400 V 3 Phase 50 Hz; / 460 V 1 / 3 Phase 50 / 60 Hz; 600V 3 Phase 50 / 60 Hz Amperage; Amps Duty cycle: 80 A 1 Torch (SL60), 75 degree Head Operating Manual Power Supply Spare Parts Kit 50 foot (15.2 m) Lead THERMAL DYNAMICS CUTMASTER 82 # PKG PLASMA CUTTING SYSTEM Input AC Voltage: 208V - 230V Amperage; Amps Single Phase Cutmaster True Series 52 Power Supply 75 degree Radnor MasterCut MC60 Hand Torch with 20 lead. Input Power Cable Work Cable and Clamp THERMAL DYNAMICS CUTMASTER TRUE Series 52 #

7 EA PLASMA CUTTER Handheld or mechanized plasma system for cutting and gouging metal. Input Voltages: V, 1/3-Phase, 50 / 60 Hz, CSA; V, 3-Phase, 50 / 60 Hz, CE Rated Output Voltage: 140 VDC Output Current: A HYPERTHERM POWERMAX PKG TRACK CUTTING MACHINE Portable With Rigging, Torch and Tip Cutting capacities: Length increments of 72 ; Circle diameters 4 to 96 Speed Range: 1 to 60 Inches per minute Cutting Machine MT210A Torch and Torch Rack Hose and Fittings (For Two (2) Hose Operation) 32 Pitch pinion torch holder 3 Hose Manifold Block VICTOR VCM200 Series (#VIC )

8 PKG WELDING AND CUTTING OUTFIT Heavy-duty Cutting Attachment Regulators (2-stage) Cutting Tip Welding Tip Goggles Striker with Flint 20 foot, 3/16 inch Twin Neoprene Hose with Connections Welding Torch Handle with Mixer Instruction Manual Two-Stage Regulators: Provide precise regulation without fluctuations in pressure. Two relief valves reduce high pressure before front of regulator is damaged. Includes five welding tips sizes 1, 3, 5, 7 and 9; mulitflame tip and wrench. HARRIS #

9 PKG WELDING AND CUTTING OUTFIT Built-in reverse flow check valves Built-in flashback arrestors Operates with any fuel gas Self-reseating relief valve protects regulator Cuts up to 3/4 inch Welds up to 1/8 inch Extra heavy duty CSR450 series regulators with gauge guards Heavy duty 351FC torch handle CA2460 cutting attachment Size 2 welding nozzle cutting tip T Grade multi-fuel hose Soft sided shade 5 goggles Multi-wrench Tip Cleaner Stainless steel panel toolbox Color-coded, steel regulator gauge guards VICTOR JOURNEYMAN II #VIC BOX AIR FILTER REPLACEMENT 4 per box MOTOR GUARD #M-723 FILTER ELEMENT

10 EA AIR FILTER NPT 1/4 inch MOTOR GUARD #M PKG ELECTRODE Interchangeable to all MC60 and MC100 Mastercut plasma torches. 5 per package RADNOR # PKG DRAG TIP 30 AMP Interchangeable to all MC60 and MC100 Mastercut plasma torches. 5 per package RADNOR #

11 PKG DRAG TIP 60 AMP Interchangeable to all MC60 and MC100 Mastercut plasma torches. 5 per package RADNOR # EA WELDING HOSE TWIN 3/16 inch X 12-1/2 foot Grade R With BB Fittings Economical hose for applicatons with Acetylene Fuel Gas Only. Non-oil resistant cover - Corrugated for abrasion resistance. One continuous length Red cover for Acetylene RADNOR # EA REGULATOR Heavy duty 90 degree Head Die-forged brass head Spiral mixer blends oxygen and fuel Smooth cutting valve (push type) Stainless steel tubes Brass coupling nut and Double O Ring Seal gives quick gas-tight seal tightening without wrench. VICTOR Model CA2460 #VIC

12 EA TORCH HANDLE Heavy duty Boxed Built-in Flashback Arrestors - no need for accessory flash arrestors. Built-in Reverse Flow Check Valves Works with all fuel gases. There are pressure restrictions for different gasses. VICTOR Model 315FC VANGUARD #VIC EA WELDING NOZZLE ACETYLENE For 300 Series Torch Handles General purpose welding and pre-heating Swaged one-piece copper elbow Flame characteristic - Long Cone VICTOR O-W #VIC

13 EA REGULATOR GAUGE BRASS Replacement 2 inch by 100 PSI General-duty gauge High visibility face with calibrations to fit prescribed gas service. One-piece polycarbonate gauge crystals protect users. Complete with 1/4 inch NPT bottom stem mount. Radnor # EA REGULATOR GAUGE Side inlet Delivery range: 4-80 PSIG Oxygen Medium to heavy duty flow requirement Gas distribution systems (pipeline) Forged body and housing cap 2-1/2 inch gauges brass Stem type seat mechanism 2-3/4 inch neoprene diaphrahm Conforms to CGA E-4 VICTOR S350C-024 #

14 EA REGULATOR GAUGE Side inlet Delivery range: 2-15 PSIG Acetylene Medium to heavy duty flow requirement Gas distribution systems (pipeline) Forged body and housing cap 2-1/2 inch gauges brass Stem type seat mechanism 2-3/4 inch neoprene diaphrahm Conforms to CGA E-4 VICTOR S360A-025 # EA MANIFOLD REGULATOR GAUGE Single stage Delivery range: PSIG Air, Oxygen, Inert Gas Conforms to CGA E-4 VICTOR SR450MD-996 #

15 EA MANIFOLD REGULATOR GAUGE Single stage Delivery range: PSIG Acetylene Conforms to CGA E-4 VICTOR SR460MD-997 # EA REGULATOR NIPPLE Internal check valve Built into pigtails, tee connections and manifold blocks to resist back-flow of gases from lines, equipment and cylinders. WESTERN ENTERPRISES #15-8CV 34 2 EA REGULATOR NIPPLE WITH CHECK VALVE Brass CGA 540, 555 with Check Valve Connection type: Threaded WESTERN ENTERPRISES #63-CV

Alternate Fuel solutions

Alternate Fuel solutions ONE TORCH, ALL FUELS Complete Lineup Torches, Handles and Attachments LPG Regulators Heating Nozzles Cutting Tips Outfits Alternative Fuel Solutions What you need to know about