Catalogue. V&KL dental rotor

Transcription

1 Catalogue 2015 V&KL dental rotor d.o.o. Šmartinska cesta 152 SI-1000 Ljubljana, Slovenia tel: fax: info@vkl-dentalturbines.biz V&KL dental rotor

2 Products which we present in this catalogue are divided into the following groups: 00. Replacement Rotors for High-Speed Hand Pieces They work like genuine but cost much less! Replacement rotors for all major brands are made with the same technique like genuine rotors (see comparison on the next page). Compared to other non-genuine replacement rotors offered on the market our rotors allow more precise work with hand piece. It is a reliable product with which you can gain greater trust from your customers so in the long term it brings bigger profit. 01. High-Speed Ball that we supply are produced by Myonic (Germany). The dental handpiece industry is where Myonic first earned its reputation for excellence - they have supplied miniature ball bearings to high-tech industries for over 75 years (they are producers of bearings for Original Equipment Manufacturers, like KavoW&H,BienAir, Siemens, Sirona andlares). At V&KL dental rotor you can choose among Radial Ball (Deep Groove) and Angular Ball. Angular ball bearings provide much low noise level operation than radial ball bearings and at the same time give more power to the turbine and generally prolong the life of the rotors. Radial ball bearings are available in or version, while angular bearings are only ceramic. 02. Back Caps for Handpieces Back caps do not break as often as rotors, but still, sometimes the problem is in the back cap and not in the rotor, it s chuck or the ball bearings. Old back cap can lose its power and will no longer open the chuck In our aim to have back caps for each handpiece that we have the replacement rotor we are constantly adding new back caps to our offer. So far we have managed to get some of Kavo, W&H, Sirona and Bien Air back caps. Dear Sir or Madam, V&KL dental rotor is a trading company supplying dental replacement rotors since 1995 to all European countries and worldwide. Along the 20 years long way we have added some other replacement parts which relate and are necessary for the repairing of dental hand pieces. Our aim is to become best specialised store to support dental handpiece repairing shops. Working with us you will get a great support not only with materials we offer but also with the knowledge and willingness to hear and fulfil your special needs. We like to share all kinds of technical specifications and provide the knowledge that you sometimes may lack. We can organise teaching courses for those who are starting with repairing or have a great idea how to expand their business. We are flexible at negotiating terms of business relations, extended payment terms and prices, because we like to be a part of your success. From our very beginning we try to deliver to our customers at reasonable prices generic products with highest possible quality available on dental market. A large stock of products allows us to ship out orders the very same day we receive them so our customers can continuously work with minimal stock or even without it Take a look at the catalogue and see our offer on the following pages, hopefully you will find something interesting for your business! 03. O-Rings And Wavy Washers O-Rings provide firm sitting of rotor inside the hand piece head while at the same time they help to minimise vibration. Because they are made of rubber they become flattened sooner or later. In our rotor package O-Rings and Wavy Washers (where needed) always come free of extra costs. O-Rings and Wavy washers are also available as a single product. 04. Keys for Back Caps Your work is much easier if you have the right tools especially the keys, because the repairing cannot start without the right key. We support you with a wide range of keys to open back cap on handpieces. 05. Tools We offer a small selection of tools that come in handy to every service technician. For other tools necessary for the repair service we will be happy to advise you or even helpyou with the supply. 06. Led Bulbs 07. Xenon Bulbs Sometimes a bulb needs to be changed too. To save up your time we have added them to our offer - why search around if you can get them from us! Electrical Rotors and Rotors (Head gears) for Contra Angles 09. Carbon Brushes 10. Chucks When it comes to repairing of micromotors we can provide some electrical rotors and carbon brushes for Kavo and Bien Air micromotors. For red, blue and green Kavo and W&H contra angle we have some head gears assembled with bearings. And for some Kavo laboratory instruments we can provide rotors, chucks and carbon brushes. 11. Low and High Speed Ball for Straight And Contra Angles, Laboratory Instruments and Dental Machines More than 100 types of bearings for various dental instruments: for Kavo 192, KavoEWL 955, KavoEWL 4005, Kavo25LP, Kavo68 LDN, Kavo68 LH, Bien Air MC2, Bien Air MC3, W&H Synea WA56, W&H Synea WA99 just to name some of most frequently needed ball bearings in the dental repairing shop!

3 After-market productions Technical Features of Dental Cartridges (pull test > 4.00kp) usually combine GUIDING BUSHING and CHUCK into ONE PART, which allows the bur to move around and as consequence the bur spins inaccurately. Every rotor is marked with a serial No. Balansing: 150µg Accuracy of bur in rotation: MAX 0,01mm Shaft assembly: Laser Welded Shaft hardness (Ø ±0.001 ): 52 HRC IMPRECISE WORK with handpiece HIGHER VIBRATIONS SHORTER LIFETIME 4 - lines clamping mechanism; Borer extracting force: 30-40N; Borer guide hardness: 64HRC; Opening dimension: Ø 0/1,6 +0,005 ; The clamping accuracy after 12 months of exploitation: 0,005-0,010 Push button opening force: 22N High speed ceramic or steel ball bearings with torlon cage, appropriate for autoclave, with radial play of angular contact configuration Quality Products, Fast Delivery, Good Technical Support... V&KL dental rotor supplies rotors with guiding bushing made of HARDENED STEEL and SEPARATED from chuck, same as genuine rotors are made. This technique catches the bur strongly and holds it firmly. The bur spins accurately. the Advantages That Make Your Job Easier! PRECISE WORK with handpiece NO VIBRATION LONGER LIFETIME

4 00. Replacement Rotors for High Speed Dental Handpieces Rotors for Siemens 4000S TM1/4000MS TS1/TS Rotors for Kavo 605/ / 609/ / / 635 / / / / 639/642/ / 647/649 / / 650 / / / / / / / / / / / / / 7000 for original bearings / / for not original bearings / / 8000 / Rotors for Sirona T1 Control/TC / T2 Control * T2/T3 Racer * Sirona T1 TMC Mini / / * Sirona T1/T2/T3 Mini * Sirona Siro Boost * *Integral Shield Brg.

5 Rotors for W&H 395, 396, 695, / 398, 795, 895, * 796, / Trend TC / Synea TA98 (1998) * Synea TA98 LED/C LED * Synea TA97 LED/C LED * Synea TA * Alegra TE-95/Synea TA98 (2007) * Alegra TE * Alegra TE-95 (2009)/TE-98 LED * *Integral Shield Brg. Rotors for Bien Air Black Pearl / Croma / Boralina Bora S36-L Prestige / Prestilina / TD 783 / TDS 890 / Rotors for Castellini High Power M / Gold * Castellini Silent Power * *Integral Shield Brg. Rotors for NSK Ti Max-X700/BL/KL/SL/WL / / / Ti Max-X600 and X650 / / / Ti Max-NL9000M and X500 / / / S Max-M600 and Pana Max PLUS / / / Ti Max-A600 / / / Ti Max-A700 / / / Mach-Lite XT/Mach2/A300 Standard / / / Mach-Lite XT/Mach2/A400 Torque / / / Rotors for Star * / *Angular Contact Brg.

6 01. MYONIC High Speed Dental All bearings with Deep Groove configuration - DG (Radial contact), Torlon cage, except *: with Angular Contact configuration AC, Torlon cage. bearings for Bien Air (3,175x7,938x3,571), Smooth 1010MO 1011MO for Castellini (3,175x6,350x2,779), Flanged 1020MP 1021MP for Kavo (3,175x6,350x2,779), Groove 1030MO 1031MO for Kavo (3,175x6,350/2,769x2,380), Smooth - for K7000/K6000 rear / 1032MO* for Kavo (3,175x6,350/2,779x2,380), Groove - for K635 rear/k6000 front / 1033MO* for Kavo (3,175x6,350/4,180x3,230), Groove - for K650 front / 1034MO* for Kavo (3,175x6,350x2,779), Groove - for K650 rear; K635 front / 1035MO* for Kavo (3,175x6,450/2,679x2,380), Groove - for K680 rear; K4500/5000 / 1036MO* for Siemens (3,175x6,350x2,380), Groove 1060MO 1061MO for Star (3,175x6,350x2,779), Unique 1070MO* 1071MO* for W&H Narrow (3,175x6,350x2,380), Smooth 1080MO 1081MO for W&H Wide (3,175x6,350x2,779), Smooth 1082MO 1083MO for W&H Wide (3,175x6,350x2,779), Smooth / 1084MO* for W&H Synea (3,175x6,350x2,779), Integral shield / 1086MO* 03. O-Rings and Wavy Washers O-Ring for Bien Air Bora/Croma (8 x 1 mm) O-Ring for Kavo (6 x 1 mm) O-Ring for Kavo (6 x 1,06 mm), New models O-Ring for W&H (6 x 0,8 mm) O-Ring for Star O-Ring for Castellini O-Ring for Bien Air Prestige - large O-Ring for Bien Air Prestige - small O-Ring for Sirona T2/T3 (6,36 x 0,82 mm) O-Ring for NSK O-Ring for Kavo 609/ Wavy Washer for Kavo 605/609/615/619/655/660/ Wavy Washer for Kavo 8000/ Wavy Washer for W&H Keys for Back Caps 02. Back Caps for Handpieces Push Button Back Cap for Bien Air Bora Push Button Back Cap for Bien Air Black Pearl Push Button Back Cap for Kavo 630/ Push Button Back Cap for Kavo 646/ Friction Grip Back Cap for Kavo 630/ Push Button Back Cap for W&H Push Button Back Cap for W&H 398, 795, Push Button Back Cap for W&H Synea TA98 till Push Button Back Cap for W&H Synea TA98/TA98 LED from Push Button Back Cap for Kavo Push Button Back Cap for Kavo Push Button Back Cap for Kavo 6000/ Push Button Back Cap for Sirona T1 Control TC3/Siropure P Control Push Button Back Cap for Sirona T1/T2 Control Push Button Back Cap for Sirona T2/T3 Racer Push Button Back Cap for Sirona SIRO Boost Push Button Back Cap for Kavo Push Button Back Cap for Kavo 635/ Push Button Back Cap for Siemens 4000S Back Cap Key for Kavo 630/640/ Back Cap Key for Kavo 635/ Back Cap Key for Kavo 647/649/650/655/6000/ Back Cap Key for W&H Synea TA98 (2 points key) Back Cap Key for W&H Synea TA96 (2 points key) Back Cap Key for W&H Synea TA97/ TA97LED/TA98LED (3 points key) Back Cap Key for W&H Universal (2 points key) Back Cap Key for Bien Air Bora Back Cap Key for Bien Air Croma Back Cap Key for Sirona T2 Control (3 points key) Back Cap Key for Sirona models 3 in 1 (2 points key) Back Cap Key for NSK TiMax Back Cap Key for NSK TiMax Back Cap Key for NSK TiMax A Back Cap Key for NSK TiMax A600/A /64 Back Cap Key for NSK S-Max M Back Cap Key for NSK Mach/300L/400L 46074/84

7 05. Tools Bur measuring tool (Bur Gauge) Set of tools for disassembeling of bearings (holder + STANDARD bearings tool + BIEN AIR bearings tool) Tool for disassembling of bearings with the dimension x mm and inner ring dimension 4 mm and 4.1 mm (STANDARD bearings) Tool for disassembling of bearings with the dimension x mm and inner ring dimension 4.39 mm and 4.47 mm (BIENAIR bearings) Strength Controller (Dynamometer for chuck testing) LED Bulbs LED bulb for Bien Air HS handpieces and quick connectors 67000LED LED bulb for Kavo quick connectors 67001LEDT LED bulb for Kavo motors 67001LEDM LED bulb for Bien Air motors 67002LED LED bulb for Sirona quick connectors (brown) 67003LED LED bulb for Sirona motors (green) 67004LED LED bulb for W&H HS handpieces 67005LED LED bulb for NSK quick connectors 67006LED Art. No 08. Electrical Rotors and Rotors (Head gears) for Contra Angles Rotor for Kavo motor K9 EWL950 ( ) Rotor for Kavo motor K10 ( ) Rotor for Kavo motor Intra K186 ( ) Rotor for Kavo motor K190, K196 ( ) Rotor for Kavo motor K192 ( ) Rotor for Kavo motor K193 ( ) Rotor for Siemens Rotor for MC2 40 LK ( ) Rotor for MC3 LK ( ) Rotor for red Kavo contra angle 25LH, 24LN ( , , ) Rotor for red Kavo contra angle 25LP ( ) Rotor for blue Kavo head 68LH, LU ( ) Rotor for blue Kavo head 68LDN ( ) Rotor for green Kavo head 67LH ( ) Rotor for red W&H contra angle WA-99 till 2007 ( ) Rotor for red W&H contra angle WA-99 from 2007 ( ) Rotor for blue W&H contra angle WE-56 ( ) Rotor for blue/green W&H contra angle WA-56/66 till 2007 ( ) Rotor for blue/green W&H contra angle WA-56/66 from 2007 ( ) Set (Segment, Coil, Slide) Xenon Bulbs Xenon bulb for Bien Air HS handpieces and quick connectors Xenon bulb for Kavo quick connectors and motors Xenon bulb for Bien Air motors Xenon bulb for Sirona quick connectors Xenon bulb for Sirona motors Xenon bulb for W&H HS handpieces Xenon bulb for NSK quick connectors Carbon Brushes Carbon Brushes for Kavo motor K10 ( ) Carbon Brushes for Kavo motor K9, 186, 187, 188, 189 ( ) Carbon Brushes for Kavo motor 190, 192, 193, 196, 197, 200, 201 ( ) Carbon Brushes for MC2 ( ) Carbon Brushes for MC3 ( ) Carbon Brushes for Siemens ( ) Chucks Chuck for Kavo SF4004 SF4005 ( ) Chuck for Kavo K9 EWL950/955, K10, K11 ( ) Chuck for K4, K5, K9 EWL4930/4932, K12, Power Grip ( )

8 11. Low Speed and High Speed Dental for Straight and Contra Angels, Laboratory Instruments and Dental Machines for Kavo 3x7x ,175 x 6,350 x 2, ,35 x 5 x 1, ,380 x 4,763 x 1, x8x x8x x 9 x 2, ,859 x 15,898 x 5, x9x ,859 x 15,898 x 7, x8x x 7 x 2,5 x 3, x 9,525 x 3, ,35 x 5,5 x 2, x 7 x 2, x 14 x 1 x 7, x 19 x x 22 x KIT x 22 x ,38 x 4,763 x 1, K11 Set x13x5 mm Set x 13 x x8x x8x x8x x 5 x 1, x8x x7x ,175 x 6,35 x 1,190 x 2, x9x x 5 x 1, x6x Set x 14 x x8x2 E25L Front Bearing / x 14 x 5 E25L Back Bearing / x 16 x x 11 x 5 for W&H x 6 x 2, x8x x 10 x x 6 x 2, x8x x 14 x x8x x 10 x x 6 x 2, ,35 x 5,5 x ,35 x 5,5 x x 9 x 2, / x 8 x 3 ( ) ,175 x 7,983 x 3, ,175 x 7,938 x 2, x8x x 11 x x 11 x x 14 x x 11 x x 16 x 6

9 x 7 x x 6 x ,38 x 7,938 x 3, ,175 x 7,983 x 3, x 7 x ,35 x 5,5 x x 10 x x 7 x 1, ,4 x 6,5 x 1, / for Bien Air ,175 x 7,938 x 3, ,38 x 7,938 x 3, ,38 x 7,938 x 3, x 7 x 2 for SHICK x 16 x x 7 x x 7 x x 9 x 4 611/1+2 7 x 14 x x 15,875 x ,15 x 19 x x 9,525 x 3,75 x 4 for SIRONA / SIEMENS x 10,35 x 2, x 8 x x 7 x / ,175 x 7 x x 8 x x 10 x x 6 x 2, x 9 x / for Head Gear S200L 3,175 x 6 x 2 for FARO for Head Gear MC01R 235 3,175 x 6 x 2 MODO x 6 x 2,3 MODO ,938 x 12,7 x 3, ,938 x 12,7 x 3, x 16 x ,175 x 9,525 x 3,967 MC01S x 8 x 2 MC01S x 10 x 4 for NSK B x 7 x 2 B x 10 x 3 B x 7 x 2 B x 10 x 3 B x 10 x 4 B x 13 x 5 B x 10 x 4 B x 13 x 5 B x 8 x 3 B x 7 x 2,5 B x 7 x 2,5 B ,38 x 4,763 x 1,588 B ,35 x 12,7 x 4,763 B ,35 x 12,7 x 4,763 B ,38 x 7,938 x 3,571

10 Set of for Some Instruments for K4/K for K for K for K for K for Kavo for EWL for EWL for Kavo 25 LP for Kavo 68LDN for Kavo 68LH for Bien Air MC for Bien Air MC for W&H Synea WA56LT (till 2007) for head gear x 2 for middle gear x 2 for back gear for W&H Synea WA56LT (from 2007) for head gear x 2 for middle gear x 2 for back gear for W&H Synea WA99LT (till 2007) for head gear x 2 for middle gear x 2 for back gear x 2 for W&H Synea WA99LT (from 2007) for head gear for middle gear x 2 for back gear x 2 Shipping and Delivery We keep a large stock of various dental rotors and bearings, which allows us to ship orders very fast once we receive approval of your payment. We offer air mail shipping, GLS or express post shipping with UPS or TNT for all EU orders. International orders are shipped only with express post. Customers outside the EU are responsible for any taxes or duties that may apply to their country. Returns and Replacements We offer 12 month warranties on all dental cartridges with ball bearings. We do not offer any warranty on dental cartridges without ball bearings. Warranties do not cover misuse or lack of maintenance on the part of the user. In the event of a valid warranty please enclose copy of our invoice, or your document with the dates of purchase of claimed cartridges, to your return shipment. We offer free replacements or repairs upon receipt and inspection of your item. Warranties apply only to parts sold by us during the specified time period covered by the warranty. Damage caused during return shipment due to unsuitable packaging is not a covered warranty item. Payment and Pricing We accept bank transfers only. We do not accept any credit cards. All of our articles are priced competitively compared to the prices charged by manufacturers. We use top quality OEM and aftermarket parts in all of our dental cartridges. Please be aware there are quality differences in aftermarket parts. We offer premium products because we want to give our customers best quality. We may offer quantity discounts. These offers are communicated with each customer separately. Ordering and Viewing Orders You can place your orders by sending us an or by using price inquiry chart on our website. On the basis of received quotation you can place an order at any time by sending an or fax. Customers will be sent an once their order is shipped which will contain a tracking number when sending by express post. For any further questions please , fax or simply call us! V&KL dental rotor is official distributor of TEHNODENT cartridges for EU market. Technodent is company specialised in production of dental cartridges. Clamping borer mechanism, patented by the company itself, fits completely the build-in dimensions of dental handpieces of world known producers. The V&KL dental rotor company and Tehnodent company and its products are in no way connected with the Bien Air, Castellini, Faro, Kavo, NSK, Shick, Siemens, Sirona, W&H and Star companies mentioned in this catalogue.