January 2003 Types AE317, AM317, AE318, AE319, IEC Non-reversing Combination Starters Vol. 2, Ref. No. [0476] Application Description
|
|
|
- Imogen Jenkins
- 5 years ago
- Views:
Transcription
1 8-6 January 00 Types AE7, AM7, AE8, AE9, Non-reversing s Vol., Ref. No. [0476] Application Description Features 8 Open Non-reversing Product Description The new Open Non-reversing s combine a with an to provide a complete motor protection solution by combining motor disconnect function, thermal overload protection, magnetic short circuit protection and remote control operation in one compact, assembled unit. These assembled s cover motors with ratings from.a to 00A. Dimensions.00 (.4) The Non-reversing Combination Starters can be used in the following applications: Self-Protected (UL08, Type E), for Single and Multi Panels The Combination Starters combine a with an. The A07, A08 and A09 s are UL listed as UL08, Type E, Self-Protected Combination Starters. This UL listing allows these devices to be used in motor circuits without having to add separate branch short circuit protection upstream. An magnetic contactor has been added to provide remote operation of the motor circuit. Group Installations Since the s are UL listed for Group Installations, the s provide a compact, assembled package for Group Installations up to 600V. ON/OFF rotary handle with lockout provision Visible trip indication applications from.a to 00A Class 0 overload protection Phase loss sensitivity Type coordination High Fault Short Circuit Ratings 6 ka at 480V for AE7, AM7 and AE8 starters; 0 ka at 480V for AE9 starters Short Circuit Ratings as A07: 0 V, 480Y/77V 600Y/47V up to.a A08: 0 V, 480Y/77V 600Y/47V A09: 0 V, 480Y/77V 0 600Y/47V up to 7A Magnet coil terminals located at bottom of starter for easy access and wiring AC and DC coils offered in a variety of voltages NO and NC auxiliary contacts standard on all manual motor protectors NO auxiliary contact standard on all magnetic contactors DIN rail or panel mount AE7 and AM7 starters Mounting plates standard on AE8 and AE9 starters 6. (60.8) 6.9 (76.0) Standards and Certifications Approved UL Listed File No. E868 CE Mark CSA Certified.7 (8.0) 4.9 (.4) See Application Note TP08A0TE.. (8.8).76 (9.4). (8.9).4 (.4).88 (47.8) Figure 8-. Non-reversing (A07 MMP + CE Mini ) Approximate Dimensions in Inches (mm) Pub. 078 Compact Combination Controller Pub Pub. TP08A0TE Application Note CA08000E
2 January 00 Vol., Ref. No. [0477] Types AE7, AM7, AE8, AE9, Non-reversing s (.4).9 (.0) 7.6 (8.0) 8. (08.8) 8. (.7) View Shown from Bottom.76 (9.4).77 (4.0) Drawing Showing the 4-Pole, -Pole Has the Same Overall Dimensions Figure 8-. Non-reversing (A07 MMP + CE 4 mm ) Approximate Dimensions in Inches (mm). (7.9). (.) Radius.0 (79.0) 9. (4.). (9.). (7.9). (.) Dia..0 (0.8).6 (67.0) 6.0 (.6).60 (.) Figure 8-4. Non-reversing (A08 MMP + CE 6 mm ) Approximate Dimensions in Inches (mm) CA08000E
3 8-8 January 00 Types AE7, AM7, AE8, AE9, Non-reversing s Vol., Ref. No. [0478] 7. (8.).68 (68.0) 8.7 (9.9).84 (.4) 6.4 (.0).7 (46.).9 (74.0).4 (89.8) Figure 8-. Non-reversing (A09 MMP + CE 90 mm ) Approximate Dimensions in Inches (mm) CA08000E
4 January 00 Vol., Ref. No. [0479] Types AE7, AM7, AE8, AE9, Non-reversing s 8-9 Product Selection Miniature Open Non-reversing When Ordering Specify Select required assembled starter by Number from Table 8-7 and replace the underscore (_) in the Number with the proper Magnetic Coil Code Suffix Letter from the Table 8-8. AE7, AM7, AE8 and AE9 starters are selected based on the overload current range required for a given motor. This current range is determined from the motor Full Load Ampere rating and Service Factor usually found on the motor nameplate. For motors with service factors less than., multiply the motor by.9 to select appropriate starter. 6.4A and service factor of.0 (6.4A x.9 =.88A) select Number AM7TNS_. For motors with service factor of. or greater, use motor nameplate Full Load Amperes to select the appropriate starter. 6.4A and service factor of., select Number AM7UNS_. See Page 8-6 for Listing. 8 Table 8-7. Open Non-reversing s (A07 + CE Miniature ) V 0V 00V 0V 460V 7V AC Coil DC Coil /0 /8 /6 /4 / /0 /8 /6 /4 / /4 - /4 / /4 /4 - Underscore (_) indicates Magnet Coil Suffix required. See Table 8-8 below. No mounting plate included. /4 / /4 - /4 /4 / /4 / A07AN A07BN A07CN A07DN A07EN A07FN A07GN A07HN A07JN A07KN A07LN A07MN A07NN A07PN A07RN A07SN A07TN A07UN A07VN CEBNC0_ CEBNC0_ CEBNC0_ CEBNC0_ CEBNC0_ CEBNC0_ CEBNC0_ CEBNC0_ CEBNC0_ CEBNC0_ CEBNC0_ CEBNC0_ CEBNC0_ CEBNC0_ CEBNC0_ CEBNC0_ CECNC0_ CECNC0_ CECNC0_ AM7ANS_ AM7BNS_ AM7CNS_ AM7DNS_ AM7ENS_ AM7FNS_ AM7GNS_ AM7HNS_ AM7JNS_ AM7KNS_ AM7LNS_ AM7MNS_ AM7NNS_ AM7PNS_ AM7RNS_ AM7SNS_ AM7TNS_ AM7UNS_ AM7VNS_ Table 8-8. AC and DC Coil Suffixes Notes Coil Volts and Hertz Code Suffix AC Coils 0/60 or 0/0 /60 or 0/0 480/60 or 4/0 600/60 or 0/0 08/60 77/ /0 4/60, 4/0 DC Coils 0V DC V DC 4V DC 48V DC A B C D E H L T A R T W Each Starter includes: () C0FMC Front Mount Auxiliary Contact NO/NC () C0WC Wiring Connector Link Call factory for Reversing Units Technical Data A07 MMPs Pages 8-8- Wiring/TC Curve Pages CE s Pages Dimensions Page 8-6 Accessories A07 MMPs Pages CE s Pages 4-7, 4-9 Discount Symbol CD7 CA08000E
5 8-0 January 00 Types AE7, AM7, AE8, AE9, Non-reversing s Vol., Ref. No. [0480] 8 Open Non-reversing When Ordering Specify Select required assembled starter by Number from Table 8-9 and replace the underscore (_) in the Number with the proper Magnetic Coil Code Suffix Letter from Table 8-0. AE7, AM7, AE8 and AE9 starters are selected based on the overload current range required for a given motor. This current range is determined from the motor Full Load Ampere rating and Service Factor usually found on the motor nameplate. For motors with service factors less than., multiply the motor by.9 to select appropriate starter. 6.4A and service factor of.0 (6.4A x.9 =.88A) select Number AM7TNS_. For motors with service factor of. or greater, use motor nameplate Full Load Amperes to select the appropriate starter. 6.4A and service factor of., select Number AM7UNS_. See Page 8-6 for Listing. Table 8-9. Open Non-reversing s (A07 + CE 4 mm ) V 0V 00V 0V 460V 7V AC Coil DC Coil /0 /8 /6 /4 / - /0 /8 /6 /4 / /4 - /4 / /4 /4-7- Underscore (_) indicates Magnet Coil Suffix required. See Table 8-0 below. No mounting plate included. /4 / / /4 /4 / /4 / A07AN A07BN A07CN A07DN A07EN A07FN A07GN A07HN A07JN A07KN A07LN A07MN A07NN A07PN A07RN A07SN A07TN A07UN A07VN A07WN A07XN A07YN A07ZN CEANSC_B CEANSC_B CEANSC_B CEANSC_B CEANSC_B CEANSC_B CEANSC_B CEANSC_B CEANSC_B CEANSC_B CEANSC_B CEANSC_B CEANSC_B CEANSC_B CEANSC_B CEANSC_B CEBNSC_B CEBNSC_B CECNSC_B CECNSC_B CEDNSC_B CEENSC_B CEFNSC_B AE7ANS_ AE7BNS_ AE7CNS_ AE7DNS_ AE7ENS_ AE7FNS_ AE7GNS_ AE7HNS_ AE7JNS_ AE7KNS_ AE7LNS_ AE7MNS_ AE7NNS_ AE7PNS_ AE7RNS_ AE7SNS_ AE7TNS_ AE7UNS_ AE7VNS_ AE7WNS_ AE7XNS_ AE7YNS_ AE7ZNS_ Table 8-0. AC and DC Coil Suffixes Notes Coil Volts and Hertz Code Suffix AC Coils 0/60 or 0/0 /60 or 0/0 480/60 or 4/0 600/60 or 0/0 08/60 77/ /0 4/60, 4/0 DC Coils 0V DC V DC 4V DC 48V DC A B C D E H L T A R T W Each Starter includes: () C0LSA Line Side Adapter () C0FMC Front Mount Auxiliary Contact NO/NC () C0WC4 Wiring Connector Link Line Side Adapters are not needed for Group Installations only when used as a Self-Protected The CE#..C# signifies a black base, A & A coil terminals at the bottom and black printing on the label. The AE#..S# calls for a Front Mount Auxiliary Contact (NO/NC). Call factory for Reversing Units Technical Data A07 MMPs Pages 8-8- Wiring/TC Curve Pages CE s Pages Wiring Diagrams Pages Dimensions Page 8-7 Accessories A07 MMPs Pages CE s Pages 4-70, 4-77 Discount Symbol CD7 CA08000E
6 January 00 Vol., Ref. No. [048] Types AE7, AM7, AE8, AE9, Non-reversing s 8- When Ordering Specify Select required assembled starter by Number from Tables 8-8- and replace the underscore (_) in the Number with the proper Magnetic Coil Code Suffix Letter from Table 8-. AE7, AM7, AE8 and AE9 starters are selected based on the overload current range required for a given motor. This current range is determined from the motor Full Load Ampere rating and Service Factor usually found on the motor nameplate. For motors with service factors less than., multiply the motor by.9 to select appropriate starter. Example: For motor having of 6.4A and service factor of.0 (6.4A x.9 =.88A) select Number AM7TNS_. For motors with service factor of. or greater, use motor nameplate Full Load Amperes to select the appropriate starter. 6.4A and service factor of., select Number AM7UNS_. See Page 8-6 for Listing. Table 8-. Open Non-reversing s (A08 + CE 6 mm ) V 0V 00V 0V 460V 7V AC Coil DC Coil Underscore (_) indicates Magnet Coil Suffix required. See Table 8- below. Mounting plate included A08LN A08MN A08NN A08PN A08RN A08SN A08TN CEGNSC_B CEGNSC_B CEGNSC_B CEHNSC_B CEJNSC_B CEJNSC_B CEJNSC_B AE8LNS_ AE8MNS_ AE8NNS_ AE8PNS_ AE8RNS_ AE8SNS_ AE8TNS_ Table 8-. Open Non-reversing s (A09 + CE 90 mm ) V 0V 00V 0V 460V 7V AC Coil DC Coil Underscore (_) indicates Magnet Coil Suffix required. See Table 8- below. Mounting plate included A09RN A09SN A09TN A09UN A09VN A09WN CELNC_ CELNC_ CELNC_ CELNC_ CEMNC_ CENNC_ AE9RNS_ AE9SNS_ AE9TNS_ AE9UNS_ AE9VNS_ AE9WNS_ ,0., Table 8-. AC and DC Coil Suffixes Notes Coil Volts and Hertz Code Suffix AC Coils 0/60 or 0/0 /60 or 0/0 480/60 or 4/0 600/60 or 0/0 08/60 77/ /0 4/60, 4/0 DC Coils 0V DC V DC 4V DC 48V DC A B C D E H L T A R T W Each Starter includes: () C0LSA Line Side Adapter (not on AE8) () C0FMC Front Mount Auxiliary Contact NO/NC () C0WC6 Wiring Connector Link (not on AE9) Line Side Adapters are not needed for Group Installations only when used as a Self-Protected The CE#..C# signifies a black base, A & A coil terminals at the bottom and black printing on the label. The AE#..S# calls for a Front Mount Auxiliary Contact (NO/NC). Call factory for Reversing Units Technical Data MMPs Pages 8-8- Wiring/TC Curve Pages CE s Pages Dimensions Pages 8-7, 8-8 Accessories MMPs Pages CE s Pages 4-70, 4-77 Discount Symbol CD7 CA08000E
Features 1 Phase HP/Volts 1/6 HP AT 230 V 3 Phase HP/Volts 1/2 HP AT 200/230 V, 1-1/2 HP AT 460/575 V
804 South Street 7964-76, TX Nacogdoches Phone: 96-69-794 Fax: 96-60-468 A07NN A Man Motor Protector Eaton Corp Catalog Number A07NN Manufacturer Eaton Corp Description Manual Motor Starter, Motor Protector;
A302DN.40/.63A Thermal Current Motor Starter
4 South Street 7964-76, TX Nacogdoches Phone: 96-69-794 Fax: 96-60-468 A0DN.40/.6A Thermal Current Motor Starter Eaton Corp A0DN Manufacturer Eaton Corp Description Manual Motor Starter, Motor Protector;
Bulletin 190-M Compact Starters. Selection Guide
Bulletin 190-M Selection Guide Bulletin 190-M Selection Guide 3 Bulletin 190-M Compact Design to 45mm Wide Common Adapter for Panel or DIN Rail Mounting Pre-Wired Assembly All Control Terminations Located
XT IEC Power Control Manual Motor Protectors
May 07 Product Selection Table 7. Rotary with Screw Terminals Global Ratings and North American Ratings Type and Type 2 Coordination Motor Protective Device with Thermal and Magnetic Trip Rated Uninterrupted
1.1. Contactors and Starters... Contents Description Relays and Timers... Miniature Controls... Manual Motor Protectors. XT IEC Power Control
Contents Description Relays and Timers......................... Miniature Controls......................... Contactors and Starters.................... Thermal Overload Relays.................... C440/XT
1.1. Contactors and Starters... Contents Description Relays and Timers... Miniature Controls... Manual Motor Protectors. XT IEC Power Control
. Contents Description Relays and Timers......................... Miniature Controls......................... Contactors and Starters.................... Thermal Relays.................... C440/XT Electronic
C E R T I F I C A T E O F C O M P L I A N C E
Issued to: SIEMENS AG DF CP R&D VC 2 WERNER-VON-SIEMENS-STRASSE 48 92224 AMBERG, GERMANY This is to certify that representative samples of Combination Motor Controllers (See following pages for additional
Miniature Circuit Breakers
S00 Series Miniature S00 Series Miniature Circuit Breakers Description The S00 Series miniature circuit breaker offers a compact solution for protection requirements. The S00 devices are UL tested limiting
Selection Guide. Control Circuit and Load Protection
Selection Guide Control Circuit and Load Protection Circuit Protection Portfolio 1489-M Circuit Breakers Approved for branch circuit protection in the United States and Canada, and certified as Miniature
4.4. Definite Purpose Contactors and Starters A Starters A27, B27. NEMA Type 1 Enclosed Control
. 15 5A Starters A27, B27 Contents Description Page 15 60A Contactors C25................... V5-T-6 25 60A Starters A25, B25................. V5-T-9 15 5A Starters A27, B27 Product Selection.......................
24.4. Miniature Circuit Breakers and Supplementary Protectors. For Immediate Delivery or Tech Support call KMParts.com at (866)
.4 Miniature Circuit Breakers and Supplementary Protectors SPHM Supplementary Protector SPHM Supplementary Protector Product Description The SPHM Supplementary Protector is a dual rated product for both
C E R T I F I C A T E O F C O M P L I A N C E
Issued to: SIEMENS AG I IA CE CP R&D-VI 4 WERNER-VON-SIEMENS-STRASSE 48 92220 AMBERG, GERMANY This is to certify that representative samples of Motor Controllers, Magnetic USL, CNL - Type No 3RT10, 3RT11,
Contactors. Contactors ensure positive safety between their auxiliary contact blocks. Easy coil change Captive terminal screws
A9 - AF1650 11 Contactors A9 - A110 Maximum UL/CSA horsepower ratings according to UL508 and CSA22.2 No. 14 Includes NEMA sizes 00-3 CE mark Compact space saving design Standard auxiliary contact configurations:
Product Selection 3-Pole Contactors
- Contactors and January 0 Vol., Ref. No. [06] Product Selection -Pole Contactors When Ordering Specify Select required contactor by Catalog Number and replace the magnet coil alpha designation in the
Manual motor protectors Type MS116 Type MS325 Type MS45X Type MS49X
Manual motor protectors Type MS116 Type MS32 Type MS4X Type MS49X Manual motor protectors MS116 MS32 MS4X MS49X Description Type MS116 Suitable for use with 3-phase motors up to 10 HP @ 480V UL ed and
C E R T I F I C A T E O F C O M P L I A N C E
Issued to: SIEMENS AG DF CP R&D V 3 WERNER-VON-SIEMENS-STRASSE 48 92224 AMBERG, GERMANY This is to certify that representative samples of Combination Motor Controllers (See following pages for additional
Self-protected Combination Starters System PKZ 2-SP
Self-protected Combination Starters System PKZ 2-SP 03/035 PKZ 2/ZM/S-SP motor starters: a higher level of protection and versatility : The PKZ 2/ZM/S-SP is a self-protected starter, the first motor controller
Protectors. 35mm DIN rail snap-on mounting. Wide range of accessories
Manual motor protectors Manual motor protectors Manual motor Protectors MS116 MS32 MS4X MS49X Description Type MS116 Suitable for use with 3-phase motors up to 10 HP @ 480V UL Listed and CSA certified
C E R T I F I C A T E O F C O M P L I A N C E
Issued to: ABB FRANCE ACTIVITE PROTECTION ET CONTROL 10 RUE AMPERE 69685 CHASSIEU CEDEX FRANCE This is to certify that representative samples of MOTOR CONTROLLERS, MAGNETIC See Addendum Pages Have been
File E47705 Vol. 7 Sec. 9 Page 1 Issued: and Report Revised:
File E47705 Vol. 7 Sec. 9 Page 1 Issued: 1997-08-29 and Report Revised: 2005-06-30 DESCRIPTION PRODUCT COVERED: USL, CNL - Type Nos. 3RV1021, 3RV1121, 3RV1321 or 3RV1421, followed by combination of 0,
Selection Guide Motor Control Device Solutions
Selection Guide Motor Control Device Solutions Expect more and get it from c3controls. Our portfolio of Motor Control Devices consists of worldclass products designed and manufactured to meet your requirements
4.1. Definite Purpose Contactors and Starters. Contents
. Definite Purpose and Starters Product Overview and Starters Definite Purpose and Starters Contents Description Page 20 0A, Compact Single- and Two-Pole C25................................ V5-T- 5 360A,
3RV1011-0DA15 CIRCUIT-BREAKER, SIZE S00,
Low-Voltage Controls and Distribution > Industrial Controls > Protection Equipment > Circuit Breakers/Motor Starter Protectors > Motor Starter Protectors SIRIUS RV up to 00 A RV0-0DA5 CIRCUIT-BREAKER,
Protectors. Manual motor. Types MS116, MS132, MS45x, MS49x. MS Series. Manual motor protectors. Type MS116. Type MS132. Type MS45x.
Types MS116, MS132, MS5x, MS9x are electromechanical devices for motor and circuit protection. These devices offer local motor disconnect means, manual ON/OFF control, and protection against short circuit,
Enclosures. See Section Typical Description
January 00 Sheet 1187 Motor Starters & Contactors Low Voltage Enclosures General Individual Enclosed, ac Full Voltage.7- Combination Starters Maximum 00 hp, Volts Application Size 1, NEMA 1, Enclosed Magnetic
Bulletin 1489 Circuit Breakers. Selection Guide
Bulletin 1489 s Selection Guide Bulletin 1489-A Overview/Description Bulletin 1489-A s Energy-limiting design protects downstream components better than conventional breakers during short circuits Field-mountable
Definite Purpose Contactors and Starters
0 40A Compact Contactor 25 60A Starter Heavy-Duty Special Purpose.1 Product Overview Contactors and Starters Product Overview.............................................. 2 Application Description..........................................
Motor Controllers + Circuit Breakers
Series General...2 Series & KTA3-100 Base Units...4 Series Base Units...6 Series Base Units...8 Accessories...10 Technical Information -...20 Dimensions -...33 Technical Information - KTA3-100...39 Dimensions
Definite Purpose Contactors and Starters
0 0A Compact Contactor 25 60A Starter Heavy-Duty Special Purpose.1 Product Overview Contactors and Starters Product Overview........................................ Application Description....................................
3.1. NEMA Manual Starters. Contents Description Types B230, B330, Switches... MS Series, Single-Phase Starters...
Product Description The B100 Manual Motor Starters can be used in single-phase applications rated hp at 240 Vac or 2 hp at 20 Vdc. The starter can also be rated for three-phase applications up to 10 hp
For 200V 3 Phase Motors 185. For 240V 3 Phase Motors 187. For 480Y/277V 3 Phase Motors 189. For 600Y/347V 3 Phase Motors 191. UL Listed CSA Certified
POWER & ACTUATION ENCLOSED MOTOR PROTECTION CIRCUIT BREAKER & CONTACTOR ASSEMBLIES c3controls Series Enclosed Direct-On-Line (DOL) Starters come with all the features and benefits of our Series 330 Motor
3. Coils shall be of molded construction
.7-4 Motor Starters & Contactors Low Voltage Enclosures General Non-Combination Starters January 00 Sheet 8 0 7 8 9 4 Non-Combination Starters Maximum hp, Volts Typical Non-Combination Starter Application
1489-M Circuit Breakers
Dual terminals provide wiring/bus bar flexibility and clamp from both sides to improve connection reliability Terminal design helps prevent wiring misses Scratch- and solventresistant printing Suitable
Certi cation Record INDUSTRIAL CONTROL EQUIPMENT Motor Controllers Magnetic
Certi cation Record Customer Schneider Electric USA, Inc. Square D Raleigh (Knightdale) Plant, 8001 Knightdale Blvd Knightdale NC USA 27545 Class 3211 04 INDUSTRIAL CONTROL EQUIPMENT Motor Controllers
C E R T I F I C A T E O F C O M P L I A N C E
1512 E47705 Report Reference E4770519970821 15OCTOBER12 Issued to: SIEMENS AG DF CP R&D V 3 WERNERVONSIEMENSSTRASSE 48 9 AMBERG GERMANY This is to certify that representative samples of MOTOR CONTROLLERS,
Manual Motor Starters. Meta-MEC
Manual Motor Starters Meta-MEC Manual Motor Starters LS Meta-MEC Manual Motor Starters provide completed ranges up to 100A 45 mm 55 mm 32AF 2 2 45 mm 70 mm 63AF 100AF 3 3 Manual LS Meta-MEC Motor Starters
MINIATURE CIRCUIT BREAKERS RCBO s & DIN RAIL MOUNTED FUSE HOLDERS
MINIATURE CIRCUIT BREAKERS RCBO s & DIN RAIL MOUNTED FUSE HOLDERS MANUFACTURED IN THE EU EUROPEAN QUALITY 1, 2 & 3 POLE MCB s TRIPPING CURVES C & D CURRENT RATINGS 1AMP TO 63AMPS 10KA BREAKING CAPACITY
Amperes. F-Frame. Price U.S. $ Catalog Number. Price U.S. $ EDH2100 EDH2125 EDH2150 EDH2175 EDH2200 EDH2225
January 1 Vol. 1, Ref. No. [0487] 2 Amperes - Product Selection Table -33. s,, and E Thermal-Magnetic Circuit Breakers with Non-interchangeable Trip Units Suitable for Reverse Feed Maximum Continuous Ampere
Series L9 UL-489 Miniature Circuit Breakers
Series UL-489 iniature Breakers Industrial Breakers for Branch up to 40 Amps Sprecher+Schuh includes a line of circuit breakers approved for branch circuit applications in the United States and Canada
Definite Purpose Contactors and Starters
0 0A Compact Contactor 25 60A Starter Heavy-Duty Special Purpose.1 Product Overview Contactors and Starters Product Overview........................................ Application Description....................................
Definite Purpose Contactors and Starters
0 0A Compact Contactor 25 60A Starter Heavy-Duty Special Purpose.1 Product Overview Contactors and Starters Product Overview........................................ Application Description....................................
Table Type FD Thermal-Magnetic Circuit Breakers with Non-interchangeable Trip Units
-22 2 Amperes January 1 Vol. 1, Ref. No. [0488] Table -. FD Thermal-Magnetic Circuit Breakers with Non-interchangeable Trip Units Max. Cont. Ampere Rating @ 40 C 600V AC Maximum, 0V DC 277V AC Maximum,
B115...B180 RF200 RFN200 B250...B400 RF400 RFN400
Page -2 Page -4 Page -6 FOR BG SERIES MINI-CONTACTORS Type RF9, phase failure sensitive, manual resetting Type RFA9, phase failure sensitive, automatic resetting Type RFN9, non-phase failure sensitive,
F Motor Circuit Controllers. Series KT7 Motor Circuit Controllers. KT4 Manual Motor Starters. General Description...F2
Series KT7 General...2 Series & KTA3-100 Base Units...4 Series Base Units...6 Series Base Units...8 Accessories...10 Technical Information - KT7...20 Dimensions - KT7...32 Technical Information - KTA3-100...37
Switchboards Instant Service
January 1 Vol. 1, Ref. No. [0845] Switchboards Instant Service - Accessories Table -57. Meter Compartment Doors (Meter Sockets Not Included) Door Size Dimensions Drilling Inches mm H x 32 W 381.0 H x 8.8
Application Description
-14 Type, Intelligent Technologies (IT.) Soft Starters February 2007 Contents Description Page Type, Intelligent Technologies (IT.) Soft Starters Product Description....... -14 Application Description....
4 - Miniature controls
Index -....1.22 Selection Contactors for connection to PLCs, B6S & B7S, 3 phase...6 Contactors, Interface, B6 & B7, 3 phase...5 Contactors, features...1 Contactors, mechanically interlocked, B6 & B7, 3
Thermal Overload Relays
Data Sheet Thermal Overload Relays Ex9RD Series Ex9RD93 Ex9RD25 www.noarkusa.com NOARK Ex9RD Series Thermal overload relays are economic electromechanical protection devices for the main circuit. They
Thermal-magnetic Miniature Circuit Breaker 4230-T...
Thermal-magnetic Miniature Circuit Breaker 420-T... Description Single pole and multipole thermal-magnetic miniature circuit breakers (MCBs) in accordance with EN 60947-2, UL 077 and UL 489 for DIN rail
LOW VOLTAGE SWITCHGEAR
LOW VOLTAGE SWITCHGEAR S-N Motor Control Mitsubishi Electric s S-N Series contactors are perfect for the control of 3 phase power, either for the direct control of a motor, to supply power to a drive or
Motor Starters. Reduced Voltage. Reduced Voltage Motor Starters 1. Contents
1 January 00 Reduced Voltage Motor Starters Contents Description Page Open Type S7, Intelligent Technologies (IT.) Soft Starters Product Description............................................. Application
Cutler-Hammer Molded Case Circuit Breakers Amperes. January 2001 Vol. 1, Ref. No. [0477] G-Frame
![Cutler-Hammer Molded Case Circuit Breakers Amperes. January 2001 Vol. 1, Ref. No. [0477] G-Frame](/thumbs/89/98397840.jpg "Cutler-Hammer Molded Case Circuit Breakers Amperes. January 2001 Vol. 1, Ref. No. [0477] G-Frame")
Cutler-Hammer January 200 Vol., Ref. No. [077] s Molded Case s 5-00 Amperes 2- 2-2 Product Line Overview January 200 Vol., Ref. No. [068] 2 Product Line Description Cutler-Hammer Molded Case s are designed
Series L9 UL489 Miniature Circuit Breakers
Series L9 UL489 iniature Circuit Breakers Industrial Circuit Breakers for Branch Circuit Protection up to 63 Amps L9 Series B Circuit Breakers Series B L9 UL489 circuit breakers offer new features, expanded
Thermal Overload Relays - WEG RW Series, 2 Pole
International (5) 4-07 The RW Class Thermal Overload Relays, with their extended operational service lives, are designed for use with the CWC miniature and CWM standard contactors. These relays can be
Poles 3 Starter Size NEMA 3 NON ALUMINUM LINE TERMINAL, LOAD TERMINAL
3804 South Street 75964-763, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 H100R3C 3P 100A 600V F-Frame MC Protector Eaton Corp Catalog Number H100R3C Manufacturer Eaton Corp Description Motor Circuit
File E47705 Project 97ME August 21, 1997 REPORT. MOTOR CONTROLLERS, MANUAL Amberg, FED REP Germany
File E47705 Project 97ME18400 August 21, 1997 REPORT on MOTOR CONTROLLERS, MANUAL Amberg, FED REP Germany Copyright 1997 Underwriters Laboratories Inc. Underwriters Laboratories Inc. authorizes the above
2.1. NEMA Contactors and Starters
3A Overload C306DN3B Contents Contactors Non-Reversing and Reversing...... Starters Three-Phase Non-Reversing and Reversing, Full Voltage.................... Starters Single-Phase Non-Reversing, Full Voltage,
Series KTU7 UL489 Molded Case Circuit Breakers
Series UL489 Molded Case Circuit Breakers Versatile, convenient and space saving for a variety of applications Sprecher+Schuh s series of UL are UL489 and CE listed for global applications. The current
Overload Relay Heater Tables
Overload Relay Tables of Elements for Overload Relays General Use only when motor full load current is not known. Motor amps will vary depending on the type and manufacturer of the motor. These average
Data Sheet DIN Rail Miniature Circuit Breakers Ex9 Series - B1NQ
Data Sheet DIN Rail Miniature Circuit Breakers Ex9 Series - BNQ BNQD5T BNQD5 with Front Mounting Clips na.noark-electric.com NOARK Ex9 Series - BNQ Features The BNQ is compliant with UL/CSA/IEC standards
The breakers offer thermal-magnetic trip protection according to Z and K characteristics.
Series High Performance Circuit Breakers Description The high performance MCB offers a compact solution to circuit protection. The devices are DIN rail mounted. The is available with application-specific
IEC Contactors. IEC Contactors. YS Series. YS Series Contactors YS1N- F11 ****
YS Series Contactors Key features of the YS Series include: Compact size AC and C coil, reversing and non-reversing Weld-resistant silver alloy contacts No cadium used in contacts Highly reliable auxiliary
C E R T I F I C A T E O F C O M P L I A N C E
Issued to: SIEMENS AG I IA CE CP R&D-VI 4 WERNER-VON-SIEMENS-STRASSE 48 92220 AMBERG, GERMANY This is to certify that representative samples of CIRCUIT BREAKERS, MOLDED-CASE AND CIRCUIT BREAKER ENCLOSURES
PowerPact B. Molded case circuit breakers and switches from A
PowerPact B Molded case circuit breakers and switches from 15-125 A 2 schneider-electric.us Efficiency that clicks. PowerPact B molded case circuit breakers Schneider Electric introduces a new family member
Introduction. Standard Features. GV2, GV3, and GV7 Manual Motor Starters, Controllers, and Protectors Introduction
Introduction Introduction Schneider Electric offers a complete line of products for the manual control and protection of motors. This catalog covers those devices designed to meet IEC standards for protection
KT4 Manual Motor Starter
KT4 Manual Motor Starter Ideal for use as a manual starter The KT4 is a manual motor starter that employs the features of power switching, thermal overload protection and control circuit signaling in one
Manual motor protectors Type MS116 Type MS325 Type MS45X Type MS49X
Manual motor protectors Type MS116 Type MS32 Type MS4X Type MS49X Manual motor protectors Description Type MS116 Suitable for use with 3-phase motors up to 10 HP @ 480V UL Listed and CSA certifi ed for
Add-on blocks and accessories For BG series mini-contactors For BF series contactors For B series contactors...
Three-pole versions up to 630A in IEC AC3 duty Four-pole versions up to 1600A in IEC AC1 duty Versions for power factor correction up to 100kvar at 400VAC Four-pole versions with NO+NC or 4NC main poles
Heavy Duty DC Contactors for Power Distribution Centres
for Power Distribution Centres SW260, SW500, SW560, SW600, SW800, SW1000 & SW1500 TYPES SW260A SW800A SW1500A DC Contactors for Power Distribution Centres The Range SW260(A) SW500(A) SW560(A) SW600(A)
Ideal for use as a manual starter
Manual Motor Starter Ideal for use as a manual starter The is a manual motor starter that employs the features of power switching, thermal overload protection and control circuit signaling in one compact
Cutler-Hammer. January 2001
Cutler-Hammer Vol. -2 Product Line Overview Vol. 1, Ref. No. [0468] Product Line Description Cutler-Hammer Molded Case s are designed to provide circuit protection for low voltage distribution systems.
MULTI 9 System Catalog IEC Rated C60N/H/L Circuit Breakers
IEC Rated C60N/H/L Circuit Breakers Standard Features Fast Closing Allows increased withstand to the high inrush currents of some loads Trip-free mechanism: Contacts cannot be held in the on position when
Motor Starters. Reduced Voltage. Reduced Voltage Motor Starters Contents
June 5 Vol. 2, Ref. No. [067] -1 Reduced Voltage Motor Starters Contents Description Page Solid-State Controllers Type S701, Soft Start.......................................... -2 Type TL, Torque Limiter........................................
Short-Circuit Current Ratings
UL 508 Type E Combination Motor Controller, TeSys GV Combination Meeting UL 508 Type E, UL File E164871 Table 2: TeSys GV2P Horsepower and SCCR Ratings In combination with line spacer GV2GH7 (stand-alone
Industry Automation Control Components
Industry Automation Control Components SIRIUS 3RV2 Motor Starter Protectors SIRIUS 3RV21 Motor Starter Protectors can be easily and flexibly combined with other SIRIUS devices to reduce space requirements
File E31519 Project 10CA February 4, 2011 REPORT MAGNETIC MOTOR CONTROLLERS. Siemens AG Amberg, Germany
File E31519 Project 10CA65262 February 4, 2011 REPORT on MAGNETIC MOTOR CONTROLLERS Siemens AG Amberg, Germany Copyright 2011 Underwriters Laboratories Inc. Underwriters Laboratories Inc. authorizes the
GV2, GV3, and GV7 Manual Motor Starters, Controllers, and Protectors Standard Features
Standard Features Table : Standard Features GV2ME GV2P GV3P GV7RE/GV7RS 0. to 32 A Up to 20 hp @ 460 V 0 SCCR @ 480 V Push Button Operator 0. to 30 A Up to 5 hp @ 460 V 50 SCCR @ 480 V Rotary Handle Operator
Switches Unlimited Phone: * Fax:
For Info: sales@switchesunlimited.com www.switchesunlimited.com Phone: 800-1-0487 Fax: 718-67-6370 Page -4 Page -8 THREE-POLE CONTACTORS IEC Ith ratings in AC1 duty at 40 C: 16 to 1600A IEC Ie ratings
Interchangeable Built-in Fixed thermal Adjustable thermal Magnetic Fixed Adjustable Adjustable Electronic RMS 7 LS LSI
. Technical Data and Specifications Ratings Frames EG, JG and LG EG JG LG Maximum rated current (amperes) 15, 160 1 50 400, 630 Breaker type 3 B B E S S H H C E S H C U X E S H C U X of poles 1, 3, 4,
CIRCUIT BREAKERS FOR EQUIPMENT, 2 POLE, PUSH BUTTON
CIRCUIT BREAKERS FOR EQUIPMENT, POLE, PUSH BUTTON Product description The pole, push button actuated version of the line of thermal CBE s can be used for various purposes. Basically it is a CBE for automatic
File E14900 Project 98NK January 11, 1999 REPORT MOTOR CONTROLLERS MAGNETIC. Siemens Energy & Automation Inc. Batavia, IL
File E14900 Project 98NK40464 January 11, 1999 REPORT on MOTOR CONTROLLERS MAGNETIC Siemens Energy & Automation Inc. Batavia, IL Copyright 1999 Underwriters Laboratories Inc. Underwriters Laboratories
Overload Relays. Thermal (Bimetallic) style up to 800A. Overload relay structure
Overload Relays Thermal (Bimetallic) style up to 800A CGT type overload relays are designed for the easy mounting directly to contactors or separately by using additional bases or brackets. Relays frame
Devices for Branch Circuits and Feeders
Devices for Branch Circuits and Feeders Branch Circuit Overcurrent Protective Devices and s Fusible Solutions: When selecting fusible overcurrent protective devices, the type of fuse holder or switch is
Low Voltage Fuses For Motor Protection
Code Requirements The NEC or CEC requires that motor branch circuits be protected against overloads and short circuits. Overload protection may be provided by fuses, overload relays or motor thermal protectors.
Page 2-4 Page 2-8. Page Page 2-13
Page -4 Page -8 THREE-POLE CONTACTORS IEC Ith ratings in AC1 duty at 40 C: 16 to 1600A IEC Ie ratings in AC3 440V duty: 6 to 630A IEC Power ratings in AC3 400V duty:. to 335kW UL/CSA ratings: 3 to 500HP
Data Bulletin. Ground-Censor Ground-Fault Protection System Type GC Class 931
Data Bulletin 0931DB0101 July 2001 Cedar Rapids, IA, USA Ground-Censor Ground-Fault Protection System Type GC Class 931 09313063 GT Sensor Shunt Trip of Circuit Interrupter Window Area for Conductors GC
Overload Relays. Thermal (Bimetallic) style up to 800A. Overload relay structure
Overload Relays Thermal (Bimetallic) style up to 800A CGT type overload relays are designed for the easy mounting directly to contactors or separately by using additional bases or brackets. Relays frame
Series KTU7 UL489 Molded Case Circuit Breakers
Series KTU7 UL489 Molded Case Circuit Breakers Versatile, convenient and space saving for a variety of applications Sprecher+Schuh s KTU7 series of UL Molded Case Circuit Breakers are UL489 and CE listed
PRICING. Multi 9, Compact, Masterpact, Interpact, and Vigirex Circuit Protection Products. Class 600. October 2004
PRICING October 2004 Multi 9, Compact, Masterpact, Interpact, and Vigirex Circuit Protection Products Class 600 CONTENTS Description Page Multi 9 Supplementary Protectors and Miniature Circuit Breakers.............3
Control Circuit Protection
Contents 5SJ4 Branch Circuit Protectors 5SY4 Supplementary Protectors 5SY6 Supplementary Protectors 16/19 5SJ4 Page Selection and ordering data 1-pole up to 63A 16/4 1-pole, 2-pole, 16/5 3-pole, 240VAC
Ktec Contactors and thermal overloads
Contactors and thermal overloads Techna KTEC series contactors provide a complete solution for your ac contactor requirements.the range carries TUV, UL & CSA certification, for use in Europe, North America
Certificate of Compliance
Certificate of Compliance (012730_C_000) Issued to: Siemens AG DF CP R&D VC 2 WernervonSiemensStrasse 48 Amberg, 92224 GERMANY The products listed below are eligible to bear the CSA Mark shown Issued by:
L-Frame. With Standard Line and. Standard Terminals Only. Catalog Number. Price U.S. $ LDB2300 LDB2350 LDB2400 LDB2450 LDB2500 LDB2600
January 01 Vol. 1, Ref. No. [05] 1 Amperes 12- Table 12-99. Type Thermal-Magnetic Circuit Breakers with Non-interchangeable Trip Units Maximum Continuous Ampere 2-Pole 0 0 3-Pole 0 0 V AC Rated, 0V DC
Product index. 4 - Manual motor protectors. Manual motor protectors. Manual motor protectors Low Voltage Products & Systems 4.
Product index -....1.3 Features and benefits...1 General information Suitable applications...2 -.3 Motor ratings... Pilot duty ratings and overload trip classes...5 Ordering details Type MS116...6 Type
Product Description. Application Description
-2 Solid-State Controllers Type TL, Torque Limiter August 6 Contents Description Page Torque Limiters............ -2 Soft Start Controllers........ -4 Soft Start Controllers with Auxiliary Contact.....
Tmax Molded Case Circuit Breakers
Tmax Molded Case Circuit s Introduction ABB is once again demonstrating its commitment to new product development and its superiority in product technology. Never before has the industry seen such high
S200 UL 489 Series. Miniature circuit breakers S200. Features. Description
UL 489 Series UL 489 Series Description The Series miniature circuit breaker offers a compact solution for protection requirements. The U AND UP devices are UL 489 tested limiting and DIN rail mounted.
AF40... AF96 3-pole contactors Technical data
Main pole - Utilization characteristics according to IEC Standards IEC 60947- / 60947-4- and EN 60947- / 60947-4- Rated operational voltage Ue max. 690 V Rated frequency (without derating) 50 / 60 Hz Conventional
Bulletin 193-T1 Bimetallic Overload Relays
Bulletin 193T1 Bimetallic Overload Relays Overload protection trip class 10 / 10A Phase loss protection Ambient temperature compensation Auxiliary contacts (1 N.O. and 1 N.C.) Manual/automatic reset mode
SECTION MOTOR CONTROL
SECTION 26 24 19 MOTOR CONTROL PART 1 - GENERAL 1.1 SECTION INCLUDES A. Manual motor starters B. Magnetic motor starters C. Combination magnetic motor starters D. Solid-state reduced voltage motor starters