Heat-Shrink Indoor and Outdoor Termination SKSE
|
|
- Briana Higgins
- 5 years ago
- Views:
Transcription
1 Heat-Shrink and Termination SKSE For Polymer-Insulated and Paper-Insulated Power Cables ) = 0.6 / 1 (1.2) kv The conductors of the cables are connected to longitudinally sealed compression lugs or terminal clamps. The breakout boot and the tubes are shrunk on by heat gun or propane torch. Tools: Propane torch or heat gun, compression tool Tests Heat-shrink conductor breakout SKSE meets DIN Heat-shrink termination SKSE comprises a breakout boot, conductor covering tubes and sealing tubes. It is used for hermetically sealing the cable end, particularly on impregnated paper-insulation cable. According to the cable construction, the termination can be equipped with corresponding additional grounding kits. Items Supplied Breakout boot, conductor covering tube, sealing tube, installation instructions SKSE Nom. Cross Sec. Heat-shrink Tube Length Weight Order Number for N(A)YY SNIM-U SNIM Netto Conductor Sealing approx. mm 2 Covering Tube Tube kg mm mm for 3-Conductor Cables 3 / 35 4 to GA / to GA / to GA1102 for 4-Conductor Cables 4 / 35 4 to GA / to GA / to GA11 4 / to GA1113 Terminations for conductor lengths > 450 mm on request Order Example Cable data: NAYY 4 x /1.0(1.2)kV Selection: SKSE 4 / 150 Order Number: 5 GA 1 1 RXS Kabelgarnituren GmbH & Co. KG 39
2 GHKI, GHKF For 1-Core Polymeric Insulated Cable ) = 3.6 / 6 (7.2) kv up to 18 / 30 (36) kv Design All GHKI / GHKF terminations basically consist of nontracking tubes with integrated stress control layer inside. Depending on the application and the voltage the basic kit is completed by heat-shrink sheds. prepare cable as usual shrink termination by applying heat connect longitudinally water-proof lugs to cable core Tests Test are carried out according to DIN VDE The heat-shrink termination is suitable for all medium voltage power cables with polymeric insulation. Depending on the different requirements, the termination is designed for indoor (GHKI) or outdoor (GHKF) application. According to the cable construction, the termination can be selected with all necessary parts (e.g. grounding kit for armouring or screening). The kit selector (see overleaf) will serve you to choose the appropriate termination. L K = length of cable lug depends on cross section and material = termination length 40 RXS Kabelgarnituren GmbH & Co. KG
3 GHKI, GHKF For 1-Core Polymeric Insulated Cable ) = 3.6 / 6 (7.2) kv up to 18 / 30 (36) kv Selection of Order Number Voltage in kv in mm Order Number S F 0 A C Type of Sheath or Screening tape screen wire screen Voltage in kv Core Cross Section in mm 2 G K wire armoured aluminium layer sheath Order Example Cable data: XLPE insulated, tape screen; 1 x 150 mm 2 ; 24 kv, outdoor Selection: GHKF 24, 1 x Order Number: S46880-F41-A20 RXS Kabelgarnituren GmbH & Co. KG 41
4 GHKI, GHKF For 3-Core Polymeric Insulated Cable ) = 3.6 / 6 (7.2) kv up to 18 / 30 (36) kv Design All termination basically consist of non-tracking tubes with inner stress control layer (all in a single tube) and a heat-shrink hotmelt adhesive coated cable breakout. Depending on outdoor application and voltage the basic kit is completed by heat-shrink sheds. prepare cable as usual shrink on termination by applying heat connect longitudinally water-proof lugs to cable core Tests Test are carried out according to DIN VDE Order Example The heat-shrink termination are suitable for all medium voltage power cables with plastic insulation. Depending on the different requirements, the termination are designed for indoor (GHKI) or outdoor (GHKF) application. According to the cable construction, the termination can be selected with all necessary parts (e.g. grounding kit for armouring or screening). The kit selector (see overleaf) will serve you to choose the appropriate termination. Cable data: XLPE-cable, 17.5 kv, indoor, tape screen + tape armour, 1 x 95 mm 2, 600 mm application length Type: GHKI 17.5; 1 x , Order Number: S46880-F32-F21 L K = length of cable lug depends on cross section and material = termination length 42 RXS Kabelgarnituren GmbH & Co. KG
5 Heat-Shrink and Termination GHKI, GHKF For 3-Core Polymeric Insulated Cable ) = 3.6 / 6 (7.2) kv bis 18 / 30 (36) kv Selection of Order Number Voltage in kv in mm Type of Screening/ Armouring or Sheath A C E F G H K M tape screen wire screen tape screen + wire armour tape screen + tape armour wire screen + wire armour wire screen + tape armour composite layer sheath tape or wire armour only no screen Order Number S F Voltage in kv Core Cross Section Range in mm 2 Standard Length Special Length in mm Minimum length RXS Kabelgarnituren GmbH & Co. KG 43
6 GHSI, GHSF For 1-Core Polymeric Insulated Cable ) = 3.6 / 6 (7.2) kv up to 18 / 30 (36) kv Design All termination basically consist of non-tracking tubes with a separate stress control tube. Depending on application and voltage range the basic kit is completed by heat-shrink skirts. prepare cable as usual connect longitudinally water-proof lugs to cable core shrink tubings on by applying heat Tool: gas torch, crimping tool Tests The heat-shrink terminations GHSI and GHSF are suitable for all medium voltage power cables with polymeric insulation. The GHSI and GHSF are used in networks of power supplies and industrial plants. Tests are carried out according to DIN VDE Items Supplied Stress control tubes, track resistant termination tube, track resistant sealing tape, stress grading material, installation instruction, rain skirts (according to voltage class). GHSF GHSI L K = length of cable lug depends on cross section and material = termination length 44 RXS Kabelgarnituren GmbH & Co. KG
7 GHSI, GHSF For 1-Core Polymeric Insulated Cable ) = 3,6 / 6 (7,2) kv up to 18 / 30 (36) kv Voltage Cross Section GHSI GHSF kv mm 2 Dimension Order Number: Dimension Order Number: in mm S in mm S Core, screened, unarmoured cable 50 -F80-A1 -F81-A F80-A2 -F81-A2 7, F80-A F81-A F80-A4 -F81-A F80-A5 -F81-A F82-A1 -F83-A F82-A2 -F83-A F82-A F83-A F82-A4 -F83-A F82-A5 -F83-A5 17, F84-A1 -F85-A F84-A1 -F85-A F84-A3 -F85-A F84-A4 -F85-A F86-A1 -F87-A F86-A2 -F87-A F86-A3 -F87-A F86-A4 -F87-A F86-A5 -F87-A F86-A6 -F87-A F88-A1 -F89-A F88-A2 -F89-A F88-A3 -F89-A F88-A4 -F89-A4 Different connection kits for tape screened or armoured cables are available on request. Order Example Cable data: XLPE-insulated, wire screened cable, indoor, 1 x 150/25, 6/10 () kv Selection: GHSI, 1 x Order Number: S46880-F82-A3 RXS Kabelgarnituren GmbH & Co. KG 45
8 GHSI, GHSF For 3-Core Polymeric Insulated Cable ) = 3,6 / 6 (7,2) kv up to 18 / 30 (36) kv Design All termination basically consist of non-tracking tubes with a separate stress control tube and a heat-shrink hot-melt adhesive coated cable breakout. Depending on the voltage class the basic kit is completed by heat-shrink skirts. prepare cable as usual connect longitudinally water-proof lugs to cable core shrink tubings on by applying heat Tool: gas torch, crimping tool Tests Test are carried out according to DIN VDE The heat-shrink terminations GHSI and GHSF are suitable for all medium voltage power cables with polymeric insulation. The GHSI and GHSF are used in networks of power supplies and industrial plants. Items Supplied Stress control tubes, track resistant termination tube, track resistant sealing tape, stress grading material, installation instruction, track resistant cable breakout, grounding material, skirts (according to voltage class). GHSF GHSI L K = length of cable lug depends on cross section and material = termination length 46 RXS Kabelgarnituren GmbH & Co. KG
9 GHSI, GHSF For 3-Core Polymeric Insulated Cable ) = 3,6 / 6 (7,2) kv up to 18 / 30 (36) kv GHSI () U max Cross Section Length Order Number kv mm 2 in mm S46880-F100-A S46880-F100-A S46880-F100-A S46880-F102-A S46880-F102-A S46880-F102-A S46880-F104-A S46880-F104-A S46880-F104-A3 300 S46880-F104-A S46880-F106-A S46880-F106-A S46880-F106-A3 GHSF () U max Cross Section Standard Length Order Number kv mm 2 in mm S46880-F110-A S46880-F110-A S46880-F110-A S46880-F111-A S46880-F111-A S46880-F111-A S46880-F1-A S46880-F1-A S46880-F1-A3 300 S46880-F1-A S46880-F113-A S46880-F113-A S46880-F113-A3 Special length and armour kits are available on request. RXS Kabelgarnituren GmbH & Co. KG 47
10 GHMI, GHMF For 1-Core Paper-Insulated Cable (MIND) ) = 3.6 / 6 (7.2) kv up to 8.7 / 15 (17.5) kv prepare cable as described in the installation instr. connect longitudinally water-proof lugs to cable core shrink termination by applying heat shrink skirts on one by one Design All terminations basically consist of non-tracking tubes, stress controll tubes and a heat-shrink hotmelt adhesive coated cable breakout. Depending on the application and the voltage range the basic kit is completed by heat-shrink skirts. The heat-shrink terminations GHMI/GHMF are suitable for medium voltage power cables with paper insulation. Depending on different requirements, the terminations are designed for indoor (GHMI) or outdoor (GHMF) application. According to the cable dimension, the termination can be selected with all necessary parts. The kit selector will guide you to choose the corresponding termination. 48 RXS Kabelgarnituren GmbH & Co. KG
11 GHMI, GHMF For 1-Core Paper-Insulated Cable (MIND) ) = 3.6 / 6 (7.2) kv up to 8.7 / 15 (17.5) kv Selection of Order Number Single Core S F - A Conductor Range in mm 2 Voltage No. kv No Length of Termination in mm 7.2 kv kv 17.5 kv 24 kv 36 kv Order Example Cable data: Order Number: kv, indoor application, 1 x 150 mm 2 S46880-F62-A3 RXS Kabelgarnituren GmbH & Co. KG 49
12 GHMI, GHMF For 3-Core Paper-Insulated Belted and Armoured Cable (MIND) ) up to 8.7 / 15 (17.5) kv Breakout The heat-shrink terminations are suitable for medium voltage power cables with paper insulation. Depending on the different requirements, the terminations are designed for indoor (GHMI) or outdoor (GHMF) application. According to the cable dimensions, the termination can be selected with all necessary parts. The kit selector (see overleaf) will serve you to choose the appropriate termination. prepare cable as usual shrink termination on by applying heat shrink outdoor skirts on one by one connect longitudinally water-proof lugs to cable core Design All terminations basically consist of non-tracking tubes, stress control tubes and a heat-shrink hotmelt adhesive coated cable breakout. Depending on the application and the voltage the basic kit is completed by heat-shrink sheds. 50 RXS Kabelgarnituren GmbH & Co. KG
13 GHMI, GHMF For 3-Core Paper-Insulated Belted and Armoured Cable (MIND) ) up to 8.7 / 15 (17.5) kv Selection of Order Number Three-Core S F - A Voltage Conductor Range in mm 2 U max Cross Section No indoor straight connection indoor cross connection 72 up to up to up to up to outdoor both kind of connections indoor straight connection and indoor cross connection 73 up to up to up to up to 17.5 outdoor both kind of connections Length of Termination in mm Cross Section in mm 2 Straight Connection Cross Connection The length of the cable lug has to be added. Order Example Cable data: 7.2 kv, indoor cross connection, 1 x 70 mm 2 Order Number: S46880-F72-A2 RXS Kabelgarnituren GmbH & Co. KG 51
Silicone Push-on Accessories
Silicone Push-on Accessories RXS Kabelgarnituren GmbH & Co. KG 67 Push-on Straight Joint AMS 10, AMS 20 For 1-Conductor Polymer-Insulated Power Cables ) = 6 / 10 (12) kv; 12 / 20 (24) kv Design The AMS
More informationMV TERMINATIONS. INDOOR SINGLE CORE TERMINATION - ELTI-1C for polymeric cables - Slip-on termination - Modular type APPLICATION STANDARDS
MEDIUM VOLTAGE MV TERMINATIONS INDOOR SINGLE CORE TERMINATION - ELTI-1C APPLICATION Utilisation indoor. in boxes and compact switchgears. in terminal boxes located outdoor and subject to condensation.
More informationInstallation Instruction Heatshrink Termination For 3 Core Polymeric Cables 7.2kV to 36kV
Installation Instruction Heatshrink Termination For 3 Core Polymeric Cables 7.2kV to 36kV * PLEASE READ INSTRUCTIONS THOROUGHLY BEFORE PROCEEDING * INDOOR OUTDOOR Download free QR code scanning software
More informationInstallation Instruction EPP /92
E L E C T R I C A L P R O D U C T S. D I V I S I O N Installation Instruction EPP 0275 8/92 Terminations for Screened Single Core Plastic and Rubber Insulated Cables 7.2 kv to 36 kv without Armour Before
More informationI nstallation I nstruction Heatshrink Term ination For 3 Core Polym eric Cables 7.2 kv to 3 6 kv
I nstallation I nstruction Heatshrink Term ination For 3 Core Polym eric Cables 7.2 kv to 3 6 kv I NDOOR OUTDOOR ISSUE DATE: 05.01.11 General Fitting I nstructions * I t is highly recom m ended that a
More informationNA2XSEKRY 3 x (25-300) mm² 3.6/6 kv
NA2XSEKRY 3 x (25-300) mm² 3.6/6 kv NA2XSEKRY 3 x (25-300) mm² 3.6/6 kv (Aluminium, XLPE Insulated, Copper Tape, Lead Sheathed,, PVC Sheathed) 25 47.5 5,292 35 50.5 5,960 50 53.5 6,694 70 58.5 7,816 95
More informationINSTALLATION INSTRUCTION
HEAT SHRINKABLE TERMINATION FOR 11kV, 3 CORE, XLPE/PVC COPPER WIRE SCREEN UNARMOURED CABLE. INDOOR & OUTDOOR. Cable Dielectric INDOOR INSTRUCTION No PJT001-14A XLPE/EPR OUTDOOR Tested to IEC60502-4 (TDT
More informationNA2XSEKY 3 x (25-300) mm² 3.6/6 kv
NA2XSEKY 3 x (25-300) mm² 3.6/6 kv NA2XSEKY 3 x (25-300) mm² 3.6/6 kv (Aluminium, XLPE Insulated, Copper Tape, Lead Sheathed, PVC Sheathed) 25 39.5 3,292 35 43.0 3,824 50 46.0 4,419 70 50.5 5,264 95 54.5
More informationINSTALLATION INSTRUCTION PEM1093ENG ENGLISH
INSTALLATION INSTRUCTION PEM1093ENG 2017-04 ENGLISH HEAT SHRINK TERMINATIONS FOR SINGLE CORE CABLES INDOOR TERMINATIONS HIT1.12, HIT1.24 AND HIT1.36 OUTDOOR TERMINATIONS HOT1.12, HOT1.24 AND HOT1.36 2/12
More informationMedium Voltage. Joints & Terminations
57 - Cold Shrink Joints Supporting Core Radially shrinkable elastomeric splice Semi-conductive layer High permitivity insulation layer 6.6/11/(12) kv 3M QS1000 is a one-piece cold shrink joint body manufactured
More informationInstallation Instruction EPP /02. Terminations for Screened Single Core Polymeric Insulated Cables up to 24 kv without Armour
R Installation Instruction EPP-0778-11/02 Terminations for Screened Single Core Polymeric Insulated Cables up to 24 kv without Armour Type: IXSU-F / OXSU-F Tyco Electronics Raychem GmbH Energy Division
More informationNA2XSEY 3 x (25-300) mm 2 3.6/6 kv
NA2XSEY 3 x (25-300) mm 2 3.6/6 kv NA2XSEY 3 x (25-300) mm 2 3.6/6 kv (Aluminium, XLPE Insulated, Copper Tape, PVC Sheathed) 25 36.5 1,380 35 39.5 1,620 50 42.0 1,908 70 46.5 2,322 95 50.0 2,781 120 54.0
More informationpower cable accessories
power cable accessories kv up to 4 kv Completing the picture based on experience is the future nkt cables GmbH NKT was established in 89 as cable manufacturer. In 999 NKT A/S Denmark merged with Felten
More informationMedium voltage - Cable accessories up to 36 kv. Tapes Connection technique Tools
Medium voltage - Cable accessories up to 36 kv Tapes Connection technique Tools TABLE OF CONTENTS General information... 6 7 CAST RESIN-TECHNIQUE...8 11 Straight-through joints for polymeric-insulated
More informationQTII (X) Series Silicone Rubber Cold Shrink Termination Kits
QTII (X) Series Silicone Rubber Cold Shrink Termination Kits For MV Armored/Non-Armored Cables up to 36kV DATA SHEET Update: August 2006 1. Product Description The 3M QTII (X) Series are Silicone Rubber
More informationH e a t s h r i n k P r o d u c t G u i d e
P o w e r P r o d u c t s H e a t s h r i n k P r o d u c t G u i d e Introduction HellermannTyton is a world leader in providing systems and solutions for heatshrink applications. HellermannTyton utilises
More informationPower cable accessories catalogue
Power cable accessories catalogue MV Terminations & MV Joints Excellence in Training Obtain an accreditation in a wide range of joints and terminations. Courses available in low voltage, medium voltage
More informationCompleting the picture
HIGH VoltaGe cable accessories for 72 kv up to 170 kv Completing the picture based on experience is the future nkt cables GmbH nkt was established in 1891 as cable manufacturer. in 1999 nkt a/s denmark
More informationCaledonian Medium Voltage Cables
Three Core Cables to VDE 0276 APPLICATIONS: The three core cables are designed for distribution of electrical power with nominal voltage Uo/U ranging from 3.6/6.6KV to 19/33KV and frequency 50Hz. They
More informationCold-shrinkable Silicone 12 kv - 24 kv - 36 kv
EUROMOD NV 0/00 www.think-media.be Accessories for medium voltage power cables Terminations Cold-shrinkable Silicone kv - kv - 6 kv Catalogue 0/00 TERMINATIONS TABE OF CONTENTS COD-SHRINKABE SIICONE TERMINATIONS
More informationCaledonian Medium Voltage Cables
Three Core Cables to VDE 0276 APPLICATIONS: The three core cables are designed for distribution of electrical power with nominal voltage Uo/U ranging from 3.6/6.6KV to 19/33KV and frequency 50Hz. They
More informationCold Shrink - Silicone Rubber QTII(X)4S-32H Series Cable Termination Instructions
Cold Shrink - Silicone Rubber QTII(X)4S-32H Series Cable Termination Instructions Class I Indoor Termination Voltage Designation: 12/20(24) kv Kit Contents: 1 HeatShrinkBreakoutBootAssembly 3 HeatShrinkBindingSleeves
More informationCaledonian Medium Voltage Cables Three Core Cables to VDE 0276-
Three Core Cables to VDE 0276 APPLICATIONS The three core cables are designed for distribution of electrical power with nominal voltage Uo/U ranging from 3.6/6.6KV to 19/33KV and frequency 50Hz. They are
More informationsa B-CABLES nv PROTOLON(ST) NTSCGEWOEU Medium Voltage Flexible Cables for Use In Water sa B-CABLES nv ENERGY
PROTOLON(ST) NTSCGEWOEU Medium Voltage Flexible Cables for Use In Water ENERGY Technical Data Electrical Thermal Type Type designation PROTOLON(ST) NTSCGEWÖU Approvals/ standards DIN VDE 0250 part 813
More informationPROTOLON (SB) PROTOLON (SB) with Copper Core Shield Flexible Cables for Trailing Operation
PROTOLON (SB) PROTOLON (SB) with Copper Core Shield Flexible Cables for Trailing Operation 2 17 BUIS_003.tif 2 18 BUIS_004.tif Selection and dimensioning criteria Refer to Section 4 for further details
More informationN2XSEBY 3 x (25-300) mm² 3.6/6 kv
N2XSEBY 3 x (25-300) mm² 3.6/6 kv N2XSEBY 3 x (25-300) mm² 3.6/6 kv (Copper, XLPE Insulated, Copper Tape,, PVC Sheathed) 25 38.5 2,417 35 41.0 2,865 50 44.0 3,391 70 48.0 4,272 95 51.5 5,266 120 55.5 6,232
More informationsa B-CABLES nv PROTOLON(ST) NTSCGEWOEU.../3E Medium Voltage Flexible Cables for Use in Water with Copper Core Shield sa B-CABLES nv ENERGY
PROTOLON(ST) NTSCGEWOEU.../3E Medium Voltage Flexible Cables for Use in Water with Copper Core Shield ENERGY Technical Data Electrical Thermal Type Type designation PROTOLON (ST) NTSCGECEWÖU.../3E Approvals/
More informationCable Accessories. Product Catalogue
Cable Accessories Product Catalogue 2017 2 P age REPL INTERNATIONAL REPL HAVE BEEN DESIGNING AND MANUFACTURING CABLE ACCESSORIES FOR USE ON ENERGY AND TELECOM CABLES FOR OVER 35 YEARS. WE SUPPLY OUR PRODUCTS
More informationHigh Voltage Joints and Terminations up to 72,5 kv 145 kv
High Voltage Joints and Terminations up to 72,5 kv 145 kv 3M Cold Shrink Termination Kits QT-III and Joint Kits are designed to provide high reliability and save you time and money. They install quickly
More informationMedium Voltage Catalogue 2013
Medium Voltage Catalogue 2013 D813 SAP.Nr. 198693 1112 Medium Voltage 2013 Data, values and illustrations given in this documentation are correct and reliable according to the current state of our knowledge.
More informationHigh Voltage Accessories up to 72.5 kv
High Voltage Accessories up to 72.5 kv Technical instructions and application information The data given were determined diligently, but do not release our customers of the duty to carry out tests themselves
More informationa Nexans company Catalogue 2008
a Nexans company Catalogue 2008 EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium
More information600/1000V, XLPE Insulated Cables according to IEC
600/1000V, XLPE Insulated Cables according to IEC 60502-1 Single core(unarmoured) Two core(unarmoured) Three core(unarmoured) Three core +1(unarmoured) Four core(unarmoured) Multi- core(unarmoured) Single
More informationHeatshrink Terminations 7.2 to 36kV
Heatshrink Terminations 7.2 to 36kV Tested to international standards Competitive prices Identical to heatshrink systems currently in use, therefore no jointer retraining required Thousands already installed
More informationPower Cable Accessories. Energy Division
Power Cable Accessories Energy Division http://energy.tycoelectronics.com Catalogue 2004/2005 Content Introduction 3 Terminations Low and Medium Voltage 15 Connection Systems for gas-insulated Switchgear
More informationTechnical attributes
Technical attributes Standards adapted to DIN VDE 0281 Conductor material Cu, bare Conductor type flexible Conductor standard IEC 60228 Conductor category 5 Core insulation Core s black, number-coded,
More information600/1000V, PVC Insulated Cables according to IEC
8 Any inquiries, please feel free to contact 600/1000V, PVC Insulated s according to IEC 60502-1 Single core(unarmoured) Two core(unarmoured) Three core(unarmoured) Three core +1(unarmoured) Four core(unarmoured)
More informationPower & Control Cable IEC
(2-, 3-, and 4-cores) U 0 Application For electricity supply and control in public networks and industrial plants; suitable for use in zone 1 and zone 2 group ΙΙ classified areas (IEC 60079-14). Recoended
More informationSolutions for Underground Distribution Networks
Terminations, joints, lamp post fixtures Solutions for Underground Distribution Networks Reliable and Versatile From Ensto naturally Ensto solutions for the electricity distribution networks are safe,
More informationSolutions for Underground Distribution Networks
Terminations, joints, lamp post fixtures Solutions for Underground Distribution Networks Reliable and Versatile From Ensto naturally Ensto solutions for the electricity distribution networks are safe,
More informationN2XSEFGbY 3 x (25-300) mm² 3.6/6 kv
N2XSEFGbY 3 x (25-300) mm² 3.6/6 kv N2XSEFGbY 3 x (25-300) mm² 3.6/6 kv (Copper, XLPE Insulated, Copper Tape,, PVC Sheathed) 25 38.5 2,603 35 41.5 3,074 50 44.5 3,641 70 48.5 4,536 95 52.0 5,542 120 56.0
More informationNYY-J Cable. Dungannon Electrical Wholesale Tel: Page 1 of 10
NYY-J Cable Application: A VDE approved, solid conductor, black PVC jacketed, 600/1kV power and control cable. These power cables are designed for energy supply cable ducts, power station, industry and
More informationPRICE LIST FEBRUARY 2017 ALUMINUM UN ARMOURED / ARMOURED W.E.F :
ALUMINUM / ARMOURED ARMOURED Core - 1 Core - 2 Core - 3 Core - 3.5 Core - 4 Core - 1 Core - 2 Core - 3 Core - 3.5 Core - 4 A2XWaY A A A A2XY A2XY A2XY A2XY A2XY A2XFaY A2XFY A2XFY A2XFY A2XFY 4 86.00 97.00
More informationINSTALLATION INSTRUCTION PEM1121ENG ENGLISH
INSTALLATION INSTRUCTION PEM1121ENG 2016-06 ENGLISH SJK JOINT KIT FOR PLASTIC CABLE WITHOUT ARMOURING 1 kv SJKR JOINT KIT FOR PLASTIC CABLE WITH ARMOURING 1 kv 2/8 PEM1121ENG 2016-06 GENERAL INFORMAT ION
More informationMEDIUM VOLTAGE TERMINATIONS
CAT010509- Rev 1. 2009 INERTIA- REPL INC. All rights reserved Printed January 2009 MEDIUM VOLTAGE TERMINATIONS General Information about Heat-shrinkable Terminations 3.00 T50NS Terminations for 5-8 kv,
More informationPRICE LIST DT. JULY-2014 ALUMINUM UN ARMOURED / ARMOURED W.E.F :
ALUMINUM / ARMOURED W.E.F : 23-07-2014 ARMOURED Core - 1 Core - 2 Core - 3 Core - 3.5 Core - 4 Core - 1 Core - 2 Core - 3 Core - 3.5 Core - 4 A2XWaY A A A A2XY A2XY A2XY A2XY A2XY A2XFaY A2XFY A2XFY A2XFY
More informationIS94012-ENG - AFN February Revision 6 - Supersedes edition of 28 January and / or. 3 x Stress control mastic, type MFC (Hi-K)
IS94012-ENG - AFN 20-45 5 February 2013 - Revision 6 - Supersedes edition of 28 January 2013 Page 1 of 7 CAUTION: Read instructions thoroughly and completely prior to beginning installation. Installation
More informationEnergy Quick Reference Guide. Raychem Cable Accessories
Energy Quick Reference Guide Raychem Cable Accessories TE Energy TE Energy is a global supplier to power utilities and power industry customers, equipment manufacturers, and transport systems, with nearly
More informationHSN CODE : 8544 PRICE LIST JANUARY 2018 ALUMINUM UN ARMOURED / ARMOURED W.E.F :
HSN CODE : 8544 ALUMINUM UN ARMOURED / ARMOURED W.E.F : 09.01.2018 UN ARMOURED ARMOURED Core - 1 Core - 2 Core - 3 Core - 3.5 Core - 4 Core - 1 Core - 2 Core - 3 Core - 3.5 Core - 4 A2XWaY A A A A2XY A2XY
More informationTerminations. 3M Cold Shrink Terminations FAX TERMINATIONS. Glossary of Terminations Terms 263 Cable Types for Terminating 264 3M
Terminations Glossary of Terminations Terms 263 Cable Types for Terminating 264 3M Cold Shrink QT-III Silicone Rubber Terminations 265 3M Cold Shrink Termination QT-III 69 kv/72,5 kv 270 3M Cold Shrink
More informationSolid PE Insulated & LAP Sheathed Air Core/Jelly Filled Cables to DIN VDE 0816
Solid PE Insulated & LAP Sheathed Air Core/Jelly Filled Cables to DIN VDE 0816 APPLICATION The cables are designed for use as connection between central fices. The cables are suitable for installation
More informationNexans Network Solutions Div. Euromold
Catalogue 2012 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories
More informationHaving the widest range of cable glands products to meet every kind of requirement for use in marine, Industrial and Non(Industrial)Areas.
Aftec is a leading manufacturer of cable glands,cable Connectors and associated accessories, used extensively for power control, lighting and instrumentation cable application in connection with IEC and
More informationPower & Control Cables. U o. /U 0.6/1 kv - IEC
Power & Control Cables U o /U 0.6/1 kv - IEC 60502-1 2 KERPEN GmbH & Co. KG 07.2005 Printing errors excepted. Subject to alteration List of Contents Introduction Page B1 Construction Page B3 Use Page B4
More informationIEC Separable Connectors 36 kv and 42 kv, 630A and 1250A Front T-Body / Coupling (Rear) T-Body Connector
www.chardongroup.com IEC Separable Connectors 36 kv and 42 kv, 630A and 1250A Front T-Body / Coupling (Rear) T-Body Connector Application Chardon Front T-Body / Coupling (Rear) T-Body connectors are fully
More informationCABLE SYSTEMS. Accessories and Systems for Medium and High-Voltage Cables up to 300 kv.
MV-CONNEX, HV-CONNEX, IXOSIL Terminations, IXOSIL MSA Slip-on Joint Boxes CABLE SYSTEMS Accessories and Systems for Medium and High-Voltage Cables up to 300 kv. Welcome to the CABLE SYSTEMS Centre of Competence.
More informationPOLYCAB WIRES PVT. LTD. PCC LP NO. 2 / Dtd : 1st May Aluminium Armoured
"POLYCAB" Brand Power Cables, Solid Aluminum conductor up to 10 sqmm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape/extruded Innersheathed for Multicore Cables, Armour (Aluminium wire
More informationPOLYCAB WIRES PVT. LTD. PCC LP NO. 6 / Dtd : 6th January 2018
"POLYCAB" Brand Power Cables, Solid Aluminum conductor up to 10 sqmm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape/extruded Innersheathed for Multicore Cables, Armour (Aluminium wire
More informationPOLYCAB WIRES PVT. LTD. PCC LP NO. 3 / Dtd : 1st August 2018
"POLYCAB" Brand Power Cables, Solid Aluminum conductor up to 10 sqmm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape/extruded Innersheathed for Multicore Cables, Armour (Aluminium wire
More informationBuilding a secure foundation. Ensto Cold Shrink Solutions No flame required
Building a secure foundation Ensto Cold Shrink Solutions No flame required Ensto Underground Both heat and cold shrink accessories Ensto s product selection for underground cable networks covers both heat-
More informationflame Retardant overall screened Instrumentation cables (Multicore)
Caledonian flame Retardant Instrumentation cables www.caledonian-cables.co.uk www.addison-cables.com flame Retardant overall screened Instrumentation cables (Multicore) Re-2X(st)y Re-2X(st)ysWay PVC Outer
More informationOFFSHORE WIND FEASIBILITY STUDY APPENDICES Appendix C.2 Subsea Cable Data Sheets
OFFSHORE WIND FEASIBILITY STUDY APPENDICES 10-7 10.3.2 Appendix C.2 Subsea Cable Data Sheets Design data for TFVA 36 kv 3x1x240 mm 2 KQ Metallic Laying up Inner sheath Bedding Armor Diameter of conductor
More informationPower & Control Cable IEC
(2-, 3-, 4,- and 5-cores) U 0 Application For electricity supply and control in public networks and industrial plants; suitable for use in zone 1 and zone 2 group ΙΙ classified areas (IEC 60079-14). Recoended
More informationINTRODUCTION. The plug-in connection on the cables and lightning arrestors, allows for easy installation and replacement.
INTRODUCTION The Power Systems 44 kv MiniSub TM is the most compact system at this voltage available. Utilizing a deadfront termination and lightning arrestor setup, it eliminates the line top or side
More informationTechnical Guarantees For Electrical Materials & Equipments 1 Technical Guarantees No. IDT_1600 22/0.4 KV Low Losses, 3 phase, Indoor Distribution Transformer 1600 KVA Rating No Description Unit Requirements
More informationSolutions for Underground Distribution Networks
Terminations, joints, lamp post fixtures, cable distribution cabinets and tools Solutions for Underground Distribution Networks Accessories for 1-42 kv Ensto in short Ensto solutions for the electricity
More information3M Cold Shrink Silicone Rubber Outdoor Termination Kit QT-III 7600-S-3W Series
3M Cold Shrink Silicone Rubber Outdoor Termination Kit QT-III 7600-S-3W Series For 3-Conductor Copper Tape Shield Cables without Ground Wires Instructions IEEE Std. No. 48 Class 1 Termination CAUTION Working
More informationN2XSERY 3 x (25-300) mm² 3.6/6 kv
N2XSERY 3 x (25-300) mm² 3.6/6 kv N2XSERY 3 x (25-300) mm² 3.6/6 kv (Copper, XLPE Insulated, Copper Tape,, PVC Sheathed) 25 41.0 3,102 35 43.5 3,587 50 48.0 4,576 70 52.0 5,579 95 55.5 6,642 120 59.5 7,711
More informationCellplux Plug-in Technology
simple, secure, quick to assemble solution for entire cross-section range only standard tool required unlimited shelf life type tested to CENELEC HD 629.1 D827 SAP-No. 206884 0313 Perfect connection Profit
More informationCORDAFLEX(SMK) (N)SHTÖU Tough Rubber-Sheathed Reeling Cables
CORDAFLEX(SMK) (N)SHTÖU Tough Rubber-Sheathed Reeling Cables 3 SK1_1-001.tif 4 SK1_1-003.tif SK1_1-00.tif Selection and dimensioning criteria Refer to Section 4 for further details Ü Type CORDAFLEX(SMK)
More informationMaterials Evolved* BS EN BS EN IEC IEC (Upon customer request) (Red, Black) or (Brown, Blue)
XLPE INSULATED AND PVC OR LOW SMOKE HALOGEN FREE (LSHF) SHEATHED CABLES Voltage Rating (Uo/U) : 00/00V, 1/0V or 00/3V Standards Complied Main Specification Materials Test Methods Flame Retardant Test Test
More informationPower & Control Cables
The Quality Connection Power & Control Cables U o /U 0.6/1 kv - IEC 60502-1 2 The Quality Connection www.leoni-industrial-projects.com The LEONI Group Cable expertise for the most various industrial markets.
More informationIEC Separable Connectors 17.5 kv/24 kv, 630A
IEC Separable Connectors 17.5 kv/24 kv, 630A Front T-Body / Coupling (Rear) T-Body Connector Application The Chardon T-Body connectors are used to terminate polymeric cable to dead front apparatus such
More informationENERGY. TECWATER EMV-FC S1BC4N8-F 0,6/1 kv. Screened Cable for Water Application
ENERGY TECWATER EMV-FC S1BC4N8-F 0,6/1 kv Screened Cable for Water Application Technical Data Trademark Type designation Specification Application TECWATER EMV-FC S1BC4N8-F Design and tests according to
More informationLUGS GLANDS & LUGS GLANDS A2/BW/CW. TAN TECK SENG Electric Co. (Pte) Ltd 2009/2010
2009/2010 GLANDS & LUGS GLANDS A2 Industrial Gland BW Armoured Gland CW Armoured Gland A2/BW/CW LUGS Project Title Ping Yi Secondary School Linear Factory Draycott Park Condominium Sentosa Monorail Spring
More informationPower & Control Cable IEC
(2-, 3-, and 4-cores) U 0 PVC-Insulation, Application For electricity supply and control in public networks and industrial plants; suitable for use in zone 1 and zone 2 group ΙΙ classified areas (IEC 60079-14).
More informationHYDROFIRM(T) S1BB-F and S1BBH2-F 0,6/1 kv. Round and Flat Cables for Drinking Water Application KTW/DVGW W270/ACS/WRAS ENERGY
HYDROFIRM(T) S1BB-F and S1BBH2-F 0,6/1 kv Round and Flat Cables for Drinking Water Application KTW/DVGW W270/ACS/WRAS ENERGY Technical Data Electrical Thermal Trademark Type designation Specification Application
More informationInstallation instruction PEM1150ENG
Installation instruction PEM1150ENG 2008-08 USHJ630 SCREENED SEPARABLE BACK CONNECTOR 630 A FOR 1 CORE PLASTIC CABLES 12-24 kv ENGLISH 2/8 USHJ630 PEM1150ENG 2008-08 GENERAL INFORMAT ION - Check that the
More informationWORLDWIDE GUARDWIRE ACCESSORIES INSTALLATION MANUAL PROVEN PERIMETER PROTECTION
WORLDWIDE GUARDWIRE ACCESSORIES INSTALLATION MANUAL PROVEN PERIMETER PROTECTION GEOQUIP LIMITED Kingsfield Industrial Estate, Derby Road Wirksworth, Matlock, Derbyshire, DE4 4BG Tel : 01629 824891 Fax
More information600/1000V XLPE Insulated, PVC Sheathed, Armoured Power Cables (2-5 Cores)
www.caledonian-s.co.uk www.addison-s.com 600/1000V XLPE Insulated, PVC Sheathed, Armoured Power Cables (2-5 Cores) FGD400 1RV-R (CU/XLPE/PVC 600/1000V Class 2) FGD400 1RVMV-R (CU/XLPE/PVC/SWA/PVC 600/1000V
More information3M Electrical Global Capability. Local Back Up. Power. Industry Solutions
M Electrical Global Capability. Local Back Up. 2010 Power Industry Solutions Contents Contents 8 M Cold Shrink Joints & Termination 4 M Scotch Aerosols, Sprays & Coatings 14 M Separable Connectors 6 M
More informationa Nexans company Catalogue 2015
a Nexans company Catalogue 2015 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated
More information(K),(M),(P)489TB/G Up to 42 kv
IS91374-ENG - 489TB/G-45/S 22 October 2012 - Revision 1 - Supersedes edition of 4 May 2012 Page 1 of 9 CAUTION : Read instructions thoroughly and completely prior to beginning installation. Installation
More informationENERGY. HYDROFIRM(T) EMV-FC S1BC4B-F 0,6/1 kv. Screened Cable for Drinking Water Application KTW/ACS
ENERGY HYDROFIRM(T) EMV-FC S1BC4B-F 0,6/1 kv Screened Cable for Drinking Water Application KTW/ACS Technical Data Trademark Type designation Specification Application HYDROFIRM(T) EMV-FC S1BC4B-F Design
More informationLIST OF EDD DESCRIPTION/ SPECIFICATION AS 19 TH OCTOBER 2016
No Description/ Specification Amendment 1 EDD 1 :2008 11/0.415 kv Distribution Transformer, Oil Filled - 2 ED 2 :1987 The Galvanization of Iron and Steel, Articles Other Than Steel Wire - 3 ED 3 :1979
More informationHeat Shrinkable Tubing
Heat Shrinkable Tubing Wherever you find electricity you will find Thomas & Betts Thomas & Betts is a world leader in the manufacture and supply of electrical accessories for commercial and industrial
More informationP High Voltage Catalogue Cables Australia Powering your Project
P +61 8 9367 8978 www.cablesaustralia.com.au High Catalogue Cables Australia Powering your Project CABLES AUSTRALIA PTY LTD HIGH VOLTAGE CATALOGUE ABOUT US Cables Australia is a locally owned and operated
More informationPVC SHEATH FLAME RETARDANT CABLE TO IEC60332
600/1000V XLPE Insulated PVC Sheathed Armoured Power Cables -5 Cores CU/XLPE/PVC 600/1000V Class CU/XLPE/PVC/SWA/PVC 600/1000V Class Application: The cables are mainly used in power stations, mass transit
More information3M Cold Shrink QT-III Silicone Rubber 3/C Cabinet Mount Termination Kit
3M Cold Shrink QT-III Silicone Rubber 3/C Cabinet Mount Termination Kit With High-K Stress Relief For 3-Conductor Copper Tape Shield Cables with or without Ground Wires 7600-T-3RJS Series Instructions
More informationPower cable accessories catalogue
Power cable accessories catalogue LV Joints Delivering quality and value every day DELIVERY... Free Next Day Delivery* for orders over 100 STOCK... Millions of items in stock across the U.K SUPPORT...
More informationPremolded cable joint with cold shrink outer jacket SOJ kv
Premolded cable joint with cold shrink outer jacket SOJ 12 24 kv Premolded cable joint for XLPE- and EPR-insulated 1- or -core cables with l or u conductor, 12 24 kv. SOJ SS Standards ENELE, H 629.1 S1
More information0.6/1kV Al-Cu XLPE Insulated PVC Sheathed Power Cable
0.6/1kV Al-Cu XLPE Insulated PVC ed Power Cable SPECIFICATIONS AND STANDARDS 1.IEC;VDE ;ICEA;AS/NZS; BS; JIS. 2.Rated Voltage: 0.6/1kV 3. Number of cores : One core, two cores, three cores, 3+1 cores,
More informationHigh Voltage Aluminum, Smooth Aluminum Shield/Sheath
High Voltage Aluminum, Smooth Aluminum Shield/Sheath XLPE Insulation, HDPE Jacket, 69 kv - 138 kv Features True triple vertical extrusion system for optimum insulation concentricity, and excellent electric
More informationSPECIFICATION S VR 1(4) HALOGEN FREE POWER AND CONTROL CABLE FOR MARINE APPLICATIONS LM-HF 0,6/1 kv and TEMAR PHFX-U 0,6/1 kv APPLICATI
1(4) HALOGEN FREE POWER AND CONTROL CABLE FOR MARINE APPLICATIONS LM-HF 0,6/1 kv and TEMAR PHFX-U 0,6/1 kv APPLICATION Power and control cable for fixed installations. Designed to fulfill requirements
More informationHigh Voltage Cable Accessories Product catalog
High Voltage Cable Accessories Product catalog 1300 780 831 info@cablegrid.com.au www.cablegrid.com.au Table of Contents page 1 HV Terminations 3 Dry type plug in GIS and Transformer terminations 5 GIS/Transformer
More informationCONDUCTOR Plain bright annealed copper! alluminium, solid! stranded conductor confirming to IS: 8130: INSULATION INNER SHEATH
c A B L E 5 [B) Techno Flex manufacture high quality heavy duty power cable confirming to IS: 1554 (Part -1) L.T. 1100 volts grade CONSTRUCTION DETAILS:- Power Cable CONDUCTOR Plain bright annealed copper!
More information20 HUBER+SUHNER RADOX SOLAR
All our cables fully comply with the European directives 76/769/EWG, 2003/11/EG, 2000/53/EG, 2003/53/EG and 2002/95/EG (RoHS) and the requirements of REACH Nr. EC1907/2006. 20 RADOX SOLAR cables RADOX
More information3M Cold Shrink Silicone Rubber Termination QT-III 7600-S-3G Series Three-Core Outdoor Termination
3M Cold Shrink Silicone Rubber Termination QT-III 7600-S-3G Series Three-Core Outdoor Termination Instructions IEEE Std. No. 48 Class 1 Termination CAUTION Working around energized electrical systems may
More informationPEDCAP-R-2, R-3 & R-4S/4L-INT
PEDCAP-R-2, R-3 & R-4S/4L-INT INSTALLATION INSTRUCTION TC-061-IP Rev A, Apr 2017 www.commscope.com Joint closure system for telecommunication distribution networks Kit contents PEDCAP-R-2 PEDCAP-R-3 PEDCAP-R-4S/4L
More information22kV 425 AMP KA STYLE COUPLER 224BKA - Range
DESIGNERS, MANUFACTURERS AND SUPPLIERS OF HIGH VOLTAGE BOLTED COUPLER & ADAPTOR SYSTEMS 22kV 425 AMP KA STYLE COUPLER 224BKA - Range Document Number: TM_461 Ver: 3 ausproof.com.au The Ausproof high voltage
More information