Contents. Soldering. Page

Transcription

1 Farnell Page 1663 Date: time:04:43 Contents Page Antex Portable Gas Irons 1683 Antex Iron Tips 1680 Antex Irons & Power Supplies 1679 Antex Stations 1680 Desoldering Guns 1684 Ersa /Desoldering Stations 1679 Fume Extraction Systems 1685 Pace Handpieces 1677 Pace Solder and De- Stations 1677 Pace Spares 1678 Pace /De- Tips 1678 Portasol Portable Gas Irons 1682 Solder 1691 Accessories 1684 Spares for Antex Equipment 1681 Vulkan Portable Gas Irons 1683 Weller Desolder Stations 1671 Weller Hot Air Stations 1673 Weller Low Voltage Irons & Power Supplies 1665 Weller Mains Irons 1664 Weller Portable Gas Irons 1682 Weller Portable Ni-Cd Powered Iron 1683 Weller Re-Work Stations 1672 Weller Spares & Accessories 1675 Weller Temperature Controlled Stations 1666 Make Farnell-Newark InOne your first choice - search over 300,000 products at

2 Farnell Page 1664 Date: time:04: Multicomp Mains Iron Fixed Temperature Irons 15W and 25W Ì 230V ac operation Ì Lightweight ergonomic design Ì Strong high quality polycarbonate handle Ì UK manufactured Ì Fitted with moulded UK 3-pin mains plug Ì CE approved Ì All the replacement tips are iron and chrome plated (except ) 15W 25W Lead 1.5m, 3-Core 3x0.75mm² Insulated PVC with strain relief Max Tip Temperature 370 C 390 C Handle Length 122mm Total Length (Incl. Tip) 200mm Handle Diameter 23mm at the bottom, 17mm at the flex end Weight 170g 180g Breakdown Voltage 2500V Standard Tip Fitted 2.3mm Chisel ( ) 3.0mm Chisel ( ) Description Order Code W Iron W Iron Tip Size Style Tips for use with 15W Iron (370 C) 0.1mm Point mm Chisel mm Chisel mm Chisel mm Chisel Tips for use with 25W Iron (390 C) 0.5mm Point mm Chisel mm Screwdriver mm Chisel mm Screwdriver mm Chisel Ì Four different models available to cope with fine soldering through to heavy duty Ì On/Off indicator in the handle Ì Heat protected comfortable grip Ì Flexibe cable Ì Meets lead-free soldering requirements SP15L SP25L SP40L SP80L Voltage Supply 230V ac 230V ac 230V ac 230V ac Cable Length 1.6m 1.6m 1.6m 1.6m Overall Length (Including Tip) mm Barrel Length (Excluding Tip) mm Barrel Diameter (mm) Standard Tip Fitted S5 MT1 MT10 MTG Wattage List No. Order Code W SP15LUK W SP25LUK W SP40LUK W SP80LUK Tip Width Type Plating List No. Order Code Tips for SP15L (15W) Iron 2.0mm Screwdriver Nickel S mm Screwdriver Nickel S mm Conical (Longlife) Iron S mm Screwdriver (Longlife) Iron S Tips for SP25L (25W) Iron 0.8mm Conical Nickel MT mm Screwdriver Nickel MT mm Straight, Smoothing Tip Nickel MT Hot Knife (Blade & Chuck) HK Tips for SP40L (40W) Iron 6.3mm Screwdriver Nickel MT mm Screwdriver, Bent Nickel S mm Screwdriver (Longlife) Iron S mm Screwdriver, Bent (Longlife) Iron S Tips for SP80L (80W) Iron 9.5mm Screwdriver (Longlife) Iron MTG mm Screwdriver, Bent Nickel S mm Screwdriver (Longlife) Iron S mm Screwdriver, Bent (Longlife) Iron S Miniature Series 2000 Weller Mains Irons Instant Heat, 100 Watt Expert Gun Ì Lightweight miniature mains soldering iron Ì Economical Ì Comfortable thermoplastic handle SP Series Barrel length (excl. tip) = 50, Barrel dia. = 7 Ì Ideal for use where precision touch is needed Ì Supplied with stand List No. Order Code 12W W W Tips 3 Per Pack Price Per Pack For Iron type Tips Micro point STT Chisel Point STT Chisel Point STT Ì Multi-purpose soldering gun Ì Fingertip trigger operation Ì Ready to solder in six seconds Ì High efficiency, pre-tinned pure copper tip Note: This soldering iron is not designed for continuous use. List No. Order Code Expert soldering gun 8100UD tip - 2 per card Cutting tip - 1 per card Smoothing tip - 1 per card Temperature Controlled - W Series Ì Built-in spotlight illuminates work Ì 240Vac operation Ì Ideal for cutting, sealing, pokerwork and soldering with instant heat Watt, W61 and W61E Barrel length (excl tip) = 75, Barrel dia = Watt, W201 and W201E Barrel length (excl tip) = 131, Barrel dia = ,000s more products available at Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

3 Farnell Page 1665 Date: time:04: Watt, W101 and W101E Barrel length (excl tip) = 96, Barrel dia = 15 Ì Well balanced lightweight irons Ì High thermal reserve Ì Temperature determined by tip selection Ì Thermoplastic handle Ì Capacitor is incorporated to improve switch life and prevent interference Ì Fully earthed Ì Fitted with 1.5m burn-proof lead Ì Suitable for use with transistors, PCBs, heavy electrical connections and even sheet metal Wattage Voltage List No. Order Code W 240V W61 UK W 120V W61E W 240V W101 UK W 120V W101E W 240V W201D W 120V W201E Irons with Euro Schuko Plug 60W 240V W61 EU W 240V W101 EU W 240V W Ì KH20 for use with LR21, T3000 and TCP Ì KH6 for use wit W61 and W101 Ì Reinforced spring safety holder to prevent flex tangling in spring Ì Supplied with sponge and cast iron base Iron Series List No. Order Code TCP KH W61 & W101 KH Sponge (5 pack) WHS40 Station 40W Weller Stations CT Series Tips for W Series Irons Sloped round tip Screwdriver tip Screwdriver tip Ì Temperature controlled soldering station Ì 18V low voltage iron Ì Temperature variable between 200 C and 450 C Ì LED optical control Ì Ergonomically designed handle for user comfort Ì Meets European safety and CE approvals Ì Supplied with iron, 3.5mm straight nickel tip, stand and sponge Main supply: 230V, 50Hz Note: Nickel plated tips are supplied as card of three, iron plate tips are supplied each CT5 series for W60 Irons Iron Stands Standard KH20 CT6 series for W100 Irons CT2 series for W200 Irons Style Code W Style Code W Style Code W AA 1.6 C 3.2 E 7.0 BB 2.4 D 5.0 F 10.0 CC 3.2 E 7.0 DD 5 F 9.5 EE 6.4 Temp. Tip Temp. Tip Temp. Tip Code Temp. Code Temp. Code Temp C C C (600 F) (700 F) (700 F) C 8 5 C 8 5 C (700 F) (800 F) (800 F) 8 5 C (800 F) CT5CC7 fitted as standard CT6E7 fitted as standard CT2F7 fitted as standard NB: CT5EE6 not available List No. Order Code List No. Order Code CT5AA CT6C CT5AA CT6D CT5AA CT6D CT5BB CT6E CT5BB CT6E CT5BB CT6F CT5CC CT6F CT5CC CT2E CT5CC CT2E CT5DD CT2F CT5EE CT2F CT6C List No. 1+ All CT5 type 5.80 All CT6 type 8.00 All CT2 type KH Order List No. Code Station WHS Tips Plating 0.4mm Conical Iron mm S/Driver Iron mm S/Driver Nickel S Magnastat Station - WTCP51 Magnastat Controlled, 50 Watts, 24V ac - TCPUK UK Version for use with PS2/PS3 Power Supplies Ì Controlled through ferro-magnetic sensing Ì temperature set by changing tip Ì Station supplied with Pencil, PT- B7 Tip and Support Ì P50 will only power TCPS Ì Supplied with UK mains lead Ì Lead adaptor required if TCPS iron is to be used with PS-stations Station comprises: TCPS soldering iron, P51 power unit and KH20 bench support Description Order Code Station WTCP Station (Euro) WTCP Power Unit P Power Unit (Euro) P Pencil TCPS Support KH Lead Adaptor Ì Lightweight thermoplastic handle Ì Capacitor is incorporated to prolong switch life and eliminate interference Ì Compatible with any PS series power supply Ì Fitted with a 3 core, 1.5m silicone lead as standard or 3m version available Ì Supplied with longlife tip, Order Code , Ì Supplied with a Bulgin 3 pin connector Barrel length (excl tip)=50, Barrel dia=9 Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (65) ,000 products, stocked and ready to despatch 1665

4 Farnell Page 1666 Date: time:04: Ref: List No. Order Code TCPUK TCP3MUK *Fitted as standard 1+ All PT Series Tips WES51 50W Station WS81 Station Ì Quick heat-up and temperature recovery Ì Ideal for continuous production soldering or occassional use Ì Wireless temperature lockout prevents operators from changing the temperature to levels higher than specified Ì Wireless tip temperature calibration provides the user with capability of resetting the station Ì Automatic shut-off feature that extends tip, iron and station life Ì Temperature range from 177 C to 454 C Ì Supplied with plug Order Description List No. Code Mains supply 230Vac WES51DUK PT Series Tips for TCP Irons Sloped Round Tips 2779 An electronically controlled soldering station, with analogue display. Ì Rating 80W Ì Supply 230V input, 24V output Ì Temperature range: 150 C to 450 C Ì Temperature accurate to±2% of Max. temp Ì Temperature set by rotary potentiometer Station comprises: PU81 power unit, Mftr s List No WSP80 soldering iron, Mftr s List No WPH80 bench support, Mftr s List No Order List No. Code WS WSD81 Station Ì LED temperature condition indicator Ì ESD safe Ì Can drive all Temtronic tools compatible with the rating of the station Ì Uses LT and LTF series tips Ì Lead free manufacture compatible PTAA PTF L = 16, W = 1.6 L = 16,W = 1.2 Screwdriver Tips PTH L = 16, W = 0.8 Conical Tips PTM L = 25, W = 3.2 PTK L = 25, W = 1.2 PTE L = 19, W = 6.4 PTBB L = 16, W = 2.4 PTR L = 16, W = 1.5 PTCC L = 16, W = 3.2 PTL L = 25, W = 2.0 PTP L = 16, W = 0.8 PTDD L = 19, W = 5.0 PTC L = 16, W = 3.2 PTA W = 1.6 PTB W = 2.4 PTO L = 25, W = 0.8 Longlife tips are made from pure copper, then iron plated for long life and chromium plated to prevent oxidation. With proper care they are always wettable. Temperature Conversion Chart 260 C 315 C 370 C 430 C 480 C 500 F 600 F 700 F 800 F 900 F Temp./ Order Temp./ Order Temp./ Order Temp./ Order List No. Code List No. Code List No. Code List No. Code 315 C (600 F) PT-DD PT-B PT-P PT-CC PT-E PT-BB PT-R PT-H PT-F PT-C C (900 F) PT-K PT-H PT-CC PT-AA PT-L PT-K PT-DD PT-BB PT PT-L PT-E PT-C C (700 F) PT-M PT-F PT-CC PT-A PT-O PT-H PT-DD PT-AA7* PT-P PT-K PT-E PT-B PT-R PT-L PT-M PT-BB PT-S PT-M PT PT-C C (800 F) PT-M PT-P PT-CC PT-AA PT-08TIP An electronically controlled soldering station, with digital display. Ì Rating 80W Ì Supply 230V input, 24V output Ì Temperature range: 50 C to 450 C Ì Temperature accurate to±2% of Max. temp Ì Temperature set by up-down push buttons Ì Digital teperature display shows set, read and actual temperatures Ì ESD safe Station comprises: PUD81 power unit, Mftr s List No WSP80 soldering iron, Mftr s List No WPH80 bench support, Mftr s List No Ì Can drive all Temtronic tools compatible with the rating of the station Ì Additional functions can be programmed by WCB units Ì Automatic tool recognition and selfcalibrating Ì Uses LT series tips Order List No. Code 1+ + WSD Fast access to over 300,000 products Over 125,000 technical datasheets Technical attribute search Quick buy facility Instant order confirmation ,000s more products available at Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

5 Farnell Page 1667 Date: time:04: WD1000 Station Uses WD1 Control Unit Station comprises: PUD161 power unit, Mftr s List No x WSP80 soldering iron, Mftr s List No x WPH80 bench support, Mftr s List No Order List No. Code 1+ WSD PU51, 50W, PU81, 80W Variable Temperature Control Power Supplies The WD1000 Station provides increased functionality and greater controlability to meet the demands of current day assembly, rework, repair and laboratory requirements. The WD1 control unit supplied with the station is an ergonomic design with a LCD display; it incorporates a microprocessor controlled, closed loop temperature control system to ensure temperature accuracy and dynamic temperature stability. All Temtronic tools up to a maximum of 80W can be driven from the power unit. Ì Large scale easy view LCD display Ì ESD Safe Ì Lead free manufacture capability Ì Three fixed temperatures can be assigned with the temperature buttons - You can set the temperatures value as desired Ì Temperature lock, set back and calibration, programmable from the power unit Ì Interlock functions and remote ID for ISO applications Ì You can extend the functional diversity of this unit with a USB interface for ISO application for calibration, configuration and precise measured values Ì The soldering tools themselves are recognised automatically by the WD1/WD1000 and the corresponding control parameter assigned Ì Antistatic design of the safety rest has four different settings Ì The WSP80 uses LT and LT-LF series bits Contents of WD1000: WD1 control unit, mains cable, operating instructions, safety information, jack plug, soldering iron WSP80, safety rest WDH10 Input Voltage 230V / 50/60Hz Power Input 95W Protection Class I (Control Unit ), III ( Iron) Dimensions (LxWxH) 134 x 108 x 147mm Temperature Control 50 C C (150 F-850 F) Temperature Accuracy ± 9 C (±17 F) Temperature Stability ± 5 C (±9 F) Leak Resistance of Tip * 2 Ω (Tip to ground) Leak Voltage of Tip * 2 mv (Tip to ground) * Tip to ground / Description List No. Order Code WD1000 Station (UK) WD1000 Station (Euro) Individual Items WD1 Control Unit (UK) WD1 Control Unit (Euro) WSP80 Iron WDH 10 Iron Stand WDH Please Note: PU51/PU81 Power Supplies supplied with UK mains lead PU51/PU81 Ì Analog control electronics Ì Anti-static housing Ì Temperature control via rotary potentiometer PU81 Ì Low mass soldering tips and integrated heating elements improve heating-up time to 14 seconds (50 C to 350 C) Temperature variable: PU51/PU C to 450 C Accuracy ±2% Automatic tool recognition Equipotential bonding, normal state earthed Can drive all Temtronic tools compatible with rating. Power Order Supplies List No. Code Analogue PU PU Mains Cord to IEC Cable Socket UK Euro Schuko Switzerland Italy Denmark North America Australia WD1 and WD2 Control Units WSD161 Station An electronically controlled soldering station, with digital display. Ì Rating 2 x 80W Ì Supply 230V input, 24V output Ì Individual control of both channels Ì Temperature range: 50 C to 450 C Ì Temperature accurate to±2% of Max. temp Ì Temperature set by up-down push buttons Ì Digital teperature display, switchable between channels to show set, read and actual temperatures Ì ESD safe Ì Can drive all Temtronic tools compatible with the rating of the station Ì Additional functions can be programmed by WCB units Ì Automatic tool recognition and selfcalibrating Ì Potential balance socket Ì Uses LT series tips Single Output Twin Output These microprocessor controlled power units can be used with a range of Temtronic soldering tools to provide a functional soldering system, the WD1 is a single output unit capable of driving Temtronic solder/ desolder tools, up to a maximum rating of 80W. The WD2 is capable of driving 2 x 80W Temtronic solder/desolder tools or a single tool up to 150W. They incorporate microprocessor controlled closed loop temperature control, to provide dynamic temperature stability. Ì Large scale easy view LCD display Ì ESD Safe Ì Lead free manufacture capability Ì Three fixed temperatures can be assigned with the temperature buttons - You can set the temperatures value as desired Ì Temperature lock, set back and calibration, programmable from the power unit Ì Interlock functions and remote ID for ISO applications Ì You can extend the functional diversity of this unit with a USB interface for ISO application for calibration, configuration and precise measured values Ì Automatic tool recognition Ì The WD2 has the ability to control two 80W soldering irons at the same time or one soldering iron of 150W Contents: Control unit, mains cable, operating instructions, safety information, jack plug Note: All tools currently compatible with the PUD81 are compatible with the WD1 and all tools currently compatible with the PUD161 are compatible with the WD2. The WD1 and WD2 are replacements for the PUD81 and PUD161. Dimensions (LxWxH) 134 x 108 x 147mm Input Voltage 230V / 50/60Hz Power Input WD1 95W WD2 160W Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (65) ,000 products, stocked and ready to despatch 1667

6 Farnell Page 1668 Date: time:04: Protection Class I (Control Unit ), III ( Iron) Temperature Control 50 C C (150 F-850 F) Temperature Accuracy ± 9 C (±17 F) Temperature Stability ± 5 C (±9 F) Leak Resistance of Tip * 2 Ω (Tip to ground) Leak Voltage of Tip * 2 mv (Tip to ground) * Tip to ground Handpiece to Control Unit Compatibility Handpieces WD1 WD2 Mftrs List No. Order Code WSP 80 Iron WSP 80 Iron Set (Includes WDH 10 Holder) WMP Iron WMP WMP Iron Set (Includes WDH 20 Holder) MPR 80 Antistatic Peritronic Pencil LR 82 Iron Set WSP 150 Iron Set WTA 50 Tweezers WHP 80 Preheating Plate 80W WSB 80 Solder Bath WSB 150 Solder Bath FE 75 Iron with Fume Extraction 80W FE 80 Iron with Fume Extraction 80W WPHT Switching Holder (WMP) WPHT /4366 Ì Temperature accuracy ±2% of max. Ì Exceptionally fast thermal recovery to ensure that consistently reliable high mass and rapid solder joints can be made Ì Ability to change tips quickly, even when hot Ì Powerful 80 watt power unit with digital display. ESD safe Ì Automatic temperature set back to 150 C Ì Uses NT series tips Contents: 1. PUD 81 power unit 2. WMP soldering iron 3. WPHT Stop and Go bench support List No. Order Code NT Series Tips TIPS (w/part NUMBER) TIP DESCRIPTION ORDER CODE 0.25 Conical Straight Description List No. Order Code WD1 Control Unit (UK) WD2 Control Unit (UK) WDH10 and WDH20 Iron Stands 1.6mm Conical Bent mm Spade mm Chisel Straight mm Conical Ì Designed to complement the design of the WD1 and WD2 power units Ì ESD safe Ì Funnel insert for the soldering iron can be moved to an ergonomically favourable position without the use of tools Ì Tip storage at the rear Ì Pedestal plate contains an insert for a sponge (sponge supplied) Compatibility: WDH 10 WDH 20 WDH10 WSP 80 Iron WMP Iron WDH / List No. Order Code WDH WDH mm Chisel Bent mm Chisel mm Chisel mm Chisel SMT Weller WSLT Precision Station 0.8 Chisel Electronically controlled soldering station with digital display, equipped with an ergonomic light weight precision soldering iron and automatic temperature set back to 150 C. 1.2mm Long Chisel Ì Precision soldering iron only 2.5cm from tip to grip, rated at 65 watt Ì Ergonomically designed, light weight (39g) handle Ì Can drive all Temtronic tools compatible with the rating Ì Temperature range 50 C to 450 C Order List No. Code NT NT1S NT1X NT NT NTA NTAX ,000s more products available at Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

7 Farnell Page 1669 Date: time:04: Order List No. Code NTB NTC NTD NTGW NTH NTK Irons for use with PU51, PU81, PUD81, PUD161, WD1 and WD2 MLR21 Barrel length (excl tip) = 52.8mm Barrel dia = 6.8mm WSP80 Barrel length (excl tip) = 53mm Barrel dia = 6.8mm Irons List No. Order Code Bench Holders Bench Holder KH Micro KH Ergonomic KH25P Higher Power WPH Fume extraction attachment FEAWSP Tips - Thermal Tweezers WT WT WT WT WT WMP Set FE50 MPR80 Barrel length (excl tip) = 52.8mm Barrel dia = 6.8mm WSP80FE WTA50 MLR21 - Micro 25W Ì Suitable for all miniature soldering applications Ì Anti-static MPR30 - Micro 25W Ergonomic Ì Adjustable tilt head allows unobstructed view Ì Ergonomic handle and angle improves wrist stress FE50 - Iron with fume extraction 50W FE75 - Iron with fume extraction 50W WSP80FE - WSP80 iron with fume extraction attachment Station Tool WTA50 - Thermal Tweezers Ì 25W per arm Ì Dual temperature sensors Ì Suited to SMD removal WSP80 - High Power 80W Ì Fast heat-up time Ì Broad applications, fine to heavy duty Ì Fast tip change with heat insulated barrel nut Ì Airflow finger grip keeps handle cool to touch LR21 Ì Anti-static Ì Universal soldering iron-50w WS 51 WSD 51 WS 81 WSD 80, WD1 WSD161, WD2 Channel 1 Channel 2 MLR 21 MPR 80 LR21 FE50 WSP 80 WSP 80 FE FE75 WST 50 WHP 80 WTA 50 This soldering iron and stand set consists of the original WMP soldering iron and the new style WDH20 stand. WMP Iron: Ì Rated at 65W Ì Short tip to grip distance ensures precise precision control Ì Ergonomic lightweight control Ì Rapid heat up, 50 C to 350 C in 7 seconds Ì Cool running handle for operator comfort Ì Fast thermal recovery Ì Hot tip change facility Ì Integral element Ì Uses NT series tips WDH 20 Iron Stand: Ì Designed to complement the design of the WD1 and WD2 power units Ì Antistatic Ì Funnel insert for the soldering iron can be moved to an ergonomically favourable position without the use of tools Ì Tip storage at the rear Ì Pedestal plate contains an insert for a sponge (sponge supplied) Contents: WMP Iron WDH 20 Iron Stand List No. Order Code WMP + WDH Individual Items (Available Separately) WMP WDH LR21 Iron Set 2612/ Ì LR21 temperature controlled soldering iron. Ì Rated at 50W Ì tips: ET series Irons List No. Order Code Micro 25W MLR Ergonomic 80W MPR High power 80W WSP80UK Thermal Tweezers50W WTA Iron 80W FE Iron Antistatic 50W LR21ESD Iron 50W FE Pencil with fume ext. 80W WSP80FE Contents: LR21 Iron KH 20 Bench Support Mftrs List No. Order Code 1+ LR21 Set Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (65) ,000 products, stocked and ready to despatch 1669

8 Farnell Page 1670 Date: time:14: WSP80 Set This soldering iron and stand set consists of the original WSP80 soldering iron and the new style WDH10 stand. WSP 80 Iron: Ì Rated at 80W Ì Short heating up time Ì Uses LT and LT-LF series tips WDH 10 Iron Stand: Ì Designed to complement the design of the WD1 and WD2 power units Ì ESD safe Ì Funnel insert for the soldering iron can be moved to an ergonomically favourable position without the use of tools Ì Tip storage at the rear Ì Pedestal plate contains an insert for a sponge (sponge supplied) Contents: WSP 80 Iron WDH 10 Iron Stand List No. Order Code WSP 80 + WDH Individual Items (Available Separately) WSP WDH LT Series Tips for FE75 and WSP80 Iron LT-1 Ø 0.25mm LT-B Ø 2.4mm LT-H Ø 0.8mm LT-1S Ø 0.25mm LT-C Ø 3.2mm LT-GW LT-A Ø 1.6mm LT-K Ø 1.2mm MT Series Tips for MLR21 and MPR30 LT-CS Ø 3.2mm LT-AS Ø 0.25mm LT-D Ø 4.5mm LT-(Calibration Tip) Ø 4.5mm / Selection Chart Tip Size List No. Order Code 0.25mm Round Tip LT mm Round Tip Stepped LT-1S mm Chisel Tip LT-A mm Round Tip LT-AS mm Chisel Tip LT-B mm Chisel Tip LT-C mm Chisel Tip LT-CS mm Chisel LT-D mm Chisel Tip LT-H mm Chisel Tip LT-K mm Chamfered Conical LT-GW Calibration Tip LT-M mm Micro Point Tip MT mm Chisel Tip MT-A mm Micro Point Tip MT-1S mm Chisel Tip MT-B mm Double Flat MT mm Bent Chisel Tip MT-HX mm Round Tip MT J-Lead Tip MT-JL mm Chisel Tip MT-H Gull Wing Tip MT-GW Order Code 1+ LT-1 to LT-K types All Order Codes LT-GW LT-CAL MT-1 to MT-B All Order Codes MT-HX MT-JL MT-GW Tips for Lead Free Available LF Tips (LT Series) Standard tips have an average iron layer of 200µm depending on the geometrical form. The new Weller LF tips carry an optimised layer of twice as much iron, thus enhancing the tip lifetime. When lead-free soldering, a general recommendation is using a tip as big as possible and if necessary to improve the process by a thinner solder-wire. For lead free solder the adjusted soldering temperature at the station should be in the range of C, depending the geometry of the tip. For further enhancement of tip lifetime Stop+Go stands should be used. Mftrs List No. Description Width A Thickn. B Order Code LT ALF Chisel LT BLF Chisel LT CLF Chisel LT DLF Chisel LT LLF Long Chisel LT MLF Long Chisel LT ASLF Round LT CSLF Round LT BBLF Round Spade LT CCLF Round Spade LT DDLF Round Spade LT GWLF Gullwing LT KNLF Knife / Mftrs List No. Order Code LT ALF LT BLF LT CLF LT DLF LT LLF LT MLF LT ASLF LT CSLF LT BBLF LT CCLF LT DDLF LT GWLF LT KNLF ,000s more products available at Prices are in Ringgit Malaysia. Due to the volatile nature of certain products, prices are subject to change without notice. C = CYAN M = Magenta Y = Yellow B = Black/MAL

9 Farnell Page 1671 Date: time:04: ET Series Tips for EC1201, FE50, LR21 and T3001 Irons Tips for MT1500 Sloped round Screwdriver Long screwdriver Conical Long conical Mftrs Style L W List No. Order Code ## Sloped round ET-CC Screwdriver ET-H Screwdriver ET-A* Screwdriver ET-B Screwdriver ET-C Screwdriver ET-D Screwdriver ET-E Long screwdriver ET-K Long screwdriver ET-L Long screwdriver ET-M Conical ET-P Long Conical 25.4 ## Long Conical ET-S *fitted as standard Order Code 1+ ET-F ET-CC ET-H ET-A ET-B ET-C ET-D ET-E ET-K ET-L ET-M ET-P ET-O ET-S Desolder Tips for MT1500 SMD Contents: WMD 1S Control Station DSX 80 Desoldering Pencil AK 20 Bench Support Desoldering Station - WDD 81V Weller Desolder Stations List No. Order Code , , (Euro) , , , Power Width Length (watts) List No. Order Code Price Each Conical W MT W MT Chisel W MT W MT W MT W MT W MT W MT Conical Bent W MT Bevel W MT W MT WMD 1D Ì Can drive all Temtronic tools Ì Automatic tool recognition Ì ESD safe Ì Digital display of set, read and actual temperatures Ì Integral pump to provide vacuum, also for hot air pencil Ì Temperature range for solder/ desoldering tools 50 C to 450 C Ì Temperature range for hot air C Ì Temperature accuracy solder/desolder ± 2% max Ì Temperature accuracy hot air ±30 C A micro processor controlled single output rework station with digital display of temperature for the repair/rework of printed circuit boards with through hole components Ì Sprung loaded for removal of surface mount package after desoldering Ì Tips available for removal of PLCC, SOIC, SIP surface mount packages SOL203/ Power Length Width Height (watts) List No. Order Code PLCC W MT1208F W MT W MT W MT SOIC W MT W MT SIP W MT W MT Ì Temperature accuracy ±2% of max. Ì Temperature range 50 to 450 C Ì A compressed air driven micro processor controlled single output Ì Rework station with digital display of temperature for the repair/rework of printed circuit boards with through hole components Ì The stations flexibility can be increased by the addition of other tools from the "Temtronic" range Ì Additional features can be programmed into the station by the WCB1 and WCB2 calibration boxes Ì Can drive all Temtronic tools compatible with the rating of the station Contents: Clean Out Tool WDD 81 V Control Station Nozzle DX DSX 80 Desoldering Pencil Nozzle DX AK 20 Bench Support m x 6mm Air Hose Order Code , Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (65) ,000 products, stocked and ready to despatch 1671

10 Farnell Page 1672 Date: time:04: WDD 161V Rework Station WMD 1A Rework Station Weller Re-Work Stations A compressed air driven micro processor controlled dual output rework station with digital display of temperature, for repair/rework of printed circuit boards with through hole components. The stations flexibility can be increased by the addition of other tools from the Temtronic range. Additional features can be programmed into the station by the WCB1 and WCB2 calibration boxes. Ì Independent control of outputs Ì ESD safe Ì Automatic tool recognition Ì Rating 160 Watt. Ì Digital display of set, read and actual Ì Temperature range for solder/desoldering temperatures tools: 50 C to 450 C Ì Temperature accuracy± 2% of maximum temperature Ì Venturi to convert air pressure to vacuum Contents: 5. WPH bench support 1. PUD 161 V power unit 6. Clean out tool 2. DSX 80 desoldering pencil 7. Gasket set 4. WSP 80 soldering iron 8. Nozzles: DX112 & DX AK20 bench support 9. 2m x 6mm air hose List No. Order Code 1+ WDD161 V , DSX 80 Desoldering Set A micro processor controlled single output rework station with digital display of temperature for the repair/rework of printed circuit boards with surface mounted components. Ì Can drive all Temtronic tools Ì Automatic tool recognition Ì ESD safe Ì Digital display of set, read and actual temperatures Ì Integral pump to provide vacuum, also Contents: WMD 1S Control Station HAP 1 Hot Air Pencil KH 27 Bench Support Accessories for use with WMA1 WMD1A WMD1D and WMD3 for hot air pencil Ì Temperature range for solder/desoldering tools 50 C to 450 C Ì Temperature range for hot air C Ì Temperature accuracy solder/de-solder ±2% max. Ì Temp accuracy hot air ±30 C List No. Order Code WMD 1A (UK)WMD1A (UK) , , WMD1 (Euro) WMD1A EURO , , , HAP1 DSV80 WSP80 Ì Ergonomic design for ease of operation. Ì Rated at 80W Ì ESD safe Ì Uses DX series nozzles Contents: DSX desoldering iron Gasket Set AK 20 Bench Support DX112 Nozzle Cleaning Tool DX113 Nozzle DS80A LR21 Mftrs List No. Order Code 1+ DSX80 Desoldering Set DSX80 Desoldering Iron Clean Out Tool DSX Nozzle DX Nozzle DX Desoldering head DSX FREE to all account holders Notification of obsolete, end of line and end of stock items Replacement or upgrade recommendations A range of tools suitable for use wth WMA1 and WMD3 rework stations. LR21 A 50 watt. temperature controlled soldering iron. Use the ET series tips. DS80A An 80 watt. desoldering iron. Uses the DS100 series nozzles DSV80 In line desoldering iron offering a shorter tip to grip length. Uses DS100 series nozzles. HAP10 Is a 100 watt. hot gas pencil with finger control air switch. WHOP50 Is an 50 watt. electronically controlled hot plate WSP80 Is an 80 watt (High Power) soldering gun. WTA50 50 watt Thermal Tweezer LR82 80 watt Heavy duty iron (24V) HTSeries tips List No. Order Code LR21 ESD WSP DSX80 (UNC) DSXV DS80 (Euro) WTA HAP1 + HK DSX80 (Euro) + AK ,000s more products available at Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

11 Farnell Page 1673 Date: time:04: Bench Holders List No. For use with Order Code 1+ KH20 LR21, HAP KH27 LR AK20 DS80A AKV DSV Nozzles for HAP HAPN-1 1.2mm Desoldering Iron Nozzles DX Series Desoldering Tips For use with DXV Desoldering Pencil TIP IMAGE TYPE NO. OD x ID (Ø) x LENGTH (mm) DX x0.7x23 DX 111 DX 112 DX x0.7x23 2.3x1.0x23 2.5x1.2x23 ORDER CODE MFTRS. LIST NO DX x1.8x DS110 DS111 DS112 Suitable for all desoldering stations DS113 DS114 DS115 DS116 ID (mm) OD (mm) Length (mm) List No DS DS DS DS DS DS DS116 List No. Order Code DS110UNC DS111UNC DS112UNC DS113UNC DS114UNC DS115UNC DS116UNC DX x0.7x DX x1.2x / Order Code All Order Codes Weller Hot Air Stations Hot Air Station - WAD 101 DXV 80 In-Line Desoldering Iron 24V/80 Watt - For use with WMD and WDD Series Rework Stations Desoldering Hand Piece and Support included in the DXV80 Set A desoldering iron for electronics rework.the DSX series tool features a novel threadless desoldering nozzle fixture system where by the nozzle is inserted into the head and locked into place by applying a 1 4turn. This patented feature allows the desoldering nozzles to be quickly and easily exchanged and also improves the rate of thermal transfer from the desoldering head to the desoldering nozzle providing the tools with a faster heat up time and recovery rate. Additionally, because there are no threads in the head to foul, maintenance and costs are reduced. Ì Disposable solder collection tube incorporated in the handle Ì Finger switch operation controls quick start Ì 80W rated Ì Can be used with all WMD and WDD series rework stations Ì Uses DX series easy change threadless tips Contents: DXV80 Inline Desoldering Iron 80W, 24V with DX113HM nozzle, AKV bench support, solder collection tube, DX112 and DX113 desoldering tips Operating Temperature Up to 450 C Warm Up Time Approx 70 sec /4369 Description List No. Order Code DXV 80 Set DXV 80 Iron Replacement Items/Consumables Price Per Pack AKV80 Bench Support Solder Collection Tube (Pk 5) Ì Digital process control for accurate temperature set Ì Built-in micro processor automatically recognises Weller irons providing optimal settings Ì WAD 101 requires a compressed air supply Ì Wide range of nozzles available Ì Can drive all Temtronic tools compatible with the rating at the station Ì Automatic tool recognition The station comprises: WAD101 control station, Dimensions (L W H) WMD3 K Hot Air Station HAP1 hot air pencil, KH27 bench support, Nut runner P8mm, 2m x 6mm air hose 180mm 115mm 101mm Temperature range Hot air: 50 C C, Iron: 50 C C Flow rate Approx. 0-10l/min. Order Code , , Ì Independent control of units Ì Can drive all Temtronic tools Ì Automatic tool recognition Ì Digital display of set, read and actual temperatures Ì Temperature setting by push button Ì Integral pump to provide vacuum, also for hot air pencil Ì ESD safe Ì Temperature range for solder/desoldering tools 50 C to 450 C Ì Temperature range for hot air tools 50 C to 550 C Ì Temperature accuracy ±2% of max temperature for solder/desoldering tools and ±30% for hot air tools Ì Set back function, time variable 1-99 min Ì Timer function for hot air Ì Lock out key Ì Supply required 230 V 50 Hz Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (65) ,000 products, stocked and ready to despatch 1673

12 Farnell Page 1674 Date: time:04: A micro processor controlled 3 output rework station with digital display of temperature for the repair/rework of printed circuit boards with through hole and surface mounted components. The stations flexibility can be increased by the addition of other tools from the Temtronic range. Contents: WSP 80 Iron WMD 3 Control Station WPH Bench Support DSX 80 Desoldering Pencil HAP 1 Hot Air Pencil AK 20 bench support KH 27 Bench Support List No. Order Code 1+ WMD3 K , WHA3000 Hot Air Rework Systems WHA3000P and WHA3000V WHA3000P pre-heating plate WHP 3000 (supplied separately) can be fitted under the board holder to provide background heating. Safety cut-off integrated into stand WBH 3000 PCB Holder: As per WHB3000S but without the pivoting stand WHP3000 Digital Pre Heating Plates: Ì Available in 600 or 1200 Watt versions Ì Totally self contained (no external PSU) Ì Can be used as stand alone Preheat solution Ì Low profile (Only 70mm high) Ì Rapid heating ceramic plates (3 separate plates) Ì Non contact safety mesh Ì Perfect for Lead free rework Ì Hi and Low power settings Ì Can be integrated with WHA3000 to create complete system WHA3000P WHA3000V Max. Heat Power 700W 700W Temperature Range 50 C C 50 C C Control Accuracy ± 25 C ± 25 C Air Volume 5-50 litres/min litres/min. Max. Vacuum bar bar Compressed Air Supply/Inert Gas (N 2 ) Not Applicable 4-6 bar Dimensions (WxLxH) 240x270x170mm 240x270x100mm Supply Voltage 230V ac 50Hz 230V ac 50Hz WBH3000S WBH3000 Dimensions (HxWxL) 440x320x446mm 100x320x446mm Maximum PCB Size 310x320mm 310x320mm WHP3000 (600W) WHP3000 (1200W) Dimensions (BxLxH) 254x395x70mm 254x395x70mm Heatable Surface 120x190mm 190x245mm Mains Voltage 230V ac 230V ac Power Small Heating Zone: 200W 1200W Large Heating Zone: 600W Temperature Range 50 C C 50 C C Description List No. Order Code Hot Air Station (P) UK WHA3000P - UK , Hot Air Station (V) UK WHA3000V , WHA3000PS Set WHA3000PS , Accessories PCB Holder c/w Stand WBH3000S , PCB Holder WBH , Heating Plate (600W) WHP W , Heating Plate (1200W) WHP W , Hot Air Station WHA300 WHA3000V WHA3000PS Set - Illustration showing all the items connected together to form a complete system - WHA3000P, Heating Plate (WHP3000) and PCB Holder c/w Stand (WBH3000S) The range has been expanded to include a Pre heating plate and board/tool holder to create an integrated rework system. A version is also available that can be used with inert gas. WHA3000P: With an integral air supply and vacuum pick-up at the nozzle. To cater for demanding repair operations WHA3000V: For use with a compressed air or inert gas supply and vacuum pick-up at the nozzle WHA3000PS: A set consisting of WHA3000P, WBH3000S and WHP3000 Heating Plate WHA3000 Digital Hot Gas Rework Stations: Ì Either with integrated turbine (WHA3000P) or Shop air/inert gas driven (WHA3000V) Ì 700W Hot gas pencil Ì Pencil can be hand held or mounted in stand Ì ESD Safe Ì Full manual or Auto control Ì LCD Digital display Ì Full process control with 3 stage thermal profiles Ì Can be controlled from a PC via RS232 (Software supplied) Ì Patented Nozzle design with integrated vacuum Ì Can be integrated with Pre heating plate and board holder/stand WHA3000V requires dry, oil free air or N 2 supply (4-6 bar)includes Stop and Go bench holder WBH 3000S PCB Holder: Retains and secures the circuit board under repair and allows positioning of the board in Xand Y directions. Boards up to a maximum size of 310x320mm both single and double sided can be accomodated in a perfectly flat condition. The WBH3000S incorporates a pivoting stand to mount a HAP 3000 hot air pencil (pencil supplied with the WHA 3000 Hot Air Station). The Ì Built-in turbine Ì No vacuum function Temperature range 50 C C Air volume 10 to 50 l/minw Output 800W Ì Stand-by function Ì Supplied with UK mains lead Order Code UK , , Euro , , In stock and ready to despatch, 300,000 products in our Asia, US and Europe warehouses ,000s more products available at Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

13 Farnell Page 1675 Date: time:04: Nozzles for Hot Air Station WHA3000/WHA300/WHA200 Spares for Desoldering Irons/Stations Dimensions in mm Dimensions NR 5 Round 4 NR 10 Round 7 ND 5 10,0 8,0 ND 10 14,0 10,0 ND 15 19,0 12,0 ND 20 21,5 14,0 NQ 05 11,0 11,0 NQ 10 14,3 14,3 NQ 15 14,5 10,0 NQ 20 15,5 13,0 NQ 25 18,0 18,0 NQ 30 17,5 23,5 NQ 35 20,5 20,5 NQ 40 26,0 26,0 NQ 45 32,0 32,0 List No. Order Code NR NR ND ND ND ND NQ NQ NQ NQ NQ NQ NQ NQ NQ Changing Tool Order Price Per For use with List No. Code Pack Clean out tools Set of 5 All desoldering stations Desoldering bulb DS-TCP, DS-WP60 DSB Desoldering DS900 & D/E, DS900P & D/E head set DS80A DS Filters Cartridge DS701D/E, DS801 & D/E, DS811 & D/E DS58, 5088AS Mineral wool (x 10) All desoldering stations Foam sleeve TCP, TCP3M, EC1201A, W60 + W Footswitch DS700D/E, DS800D/E, DS811 & D/E (ESD), DS802D/E, DS900 & D/E, DS900P & D/E Gaskets (x 10) DS Glass tube DS900 & D/E, DS900P & D/E, DS700D/E, DS701D/E, DS800D/E, DS801 & D/E, DS802D/E, DS811 & D/E (ESD) DS700D/E, DS800D/E, Heating elements DS900 & D/E, DS900P & D/E, DS802D/E, DS701D/E HE Pump DS900P Sponge All desoldering stations Switch assemblies/ DS900 & D/E, DS900P & D/E SW Temperature DS700D/E, DS800D/E, sensors DS701D/E, DS801 & D/E, DS802D/E SW Vacuum tube All desoldering stations VT (1.75m) Weller Spares & Accessories Spares for Irons and Stations Order Price For use with List No. Code Each Barrel assemblies TCP, TCP2, TCP3, TCP3Z, TCP-Z, EC2000D/E, WEC EC4000D/E MBAH Ceramic burner WSTA Connector assembly All TCP and W irons Cord clamp screws All TCP irons, WP60D/E, Flange insulator TCP, TCP-3M, TCP-12V, W60D, W60E, W100D, W100E Fuse Holder PS-2D/FE, PS-2E/FE, Handles TCP, W60D Heating elements TCP, TCP-3M, EC1201A HE1 * TCP-12V HE112V W60D W100D HEW100D WP200D, W200D, W201D WP200E, W200E, W201E Switch assemblies All TCP irons + W WP200D/E, W200D/E, W201D/E WP60D/E SW W100D/E Switch spring All TCP and WP irons Tag board TCP2, TCP3, TCP2-12, sensor EC2000D/E Tipnuts WP60D/E, W60D/E WP100D/E, W100D/E WP200D/E, W200D/E, W201D/E * New HE1 heating element, won t fit the DS700D/E or DS800D/E Replacement Irons Order Price For use with List No. Code Each iron EC2100A, EC2100AESP, iron DEC1001, PS1000, EC2000 LR21ESD Fume extraction iron EC2100AFE FE Desoldering iron DS900 & D/E, DS900P & D/E DS Metcal /De- Stations SP200 SmartHeat Station Description List No. Order Code Station SP Replacement Accessories ESD Solder Handle W/CP2 SP-HC Workstand with Sponge SP-WSK Sponge AC-YS An ideal choice for both large and small companies. For use on through-hole soldering and surface mount touch-up benches. Ì Uses SmartHeat technology - Maintains a constant tip temperature, automatically delivering the exact amount of power required for the task directly from the heater to the tip Ì The tip temperature is determined by the particular series of tip cartridge selected Ì Tip cartridge contains the solder tip, a heater and the wire coil Ì No calibration required Ì 230Vac operation System includes: Power unit, soldering handpiece, workstand with sponge, and tip cartridge removal pad Note: Tip Cartridge for the handle not supplied, see Metcal SSC-xxxA types, 600 series (330 C) or 700 series (390 C) Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (65) ,000 products, stocked and ready to despatch 1675

14 Farnell Page 1676 Date: time:04: MX-500, Desoldering & Rework Systems MX-500S - SMT /Rework MX-500TS - SMT Rework/Talon tweezers List No. Description Order Code MX-500S-21 Solder/Rework Station , MX-500TS-21 Solder/Rework Station , MX-500DS-21 Solder/Rework Station , Replacement Accessories MX-RM3E Hand Piece & Cord MX-WS4 Workstand with Sponge AC-YS3 Sponge MX-TALON Talon Hand Piece & Cord MX-WS5 DS1/Talon Workstand with Sponge MX-DS1 Desoldering Hand Piece MX-RM8E Desoldering Cord MX-DCFI Chamber Liner & Filter Pack AC-TC Desoldering Tip Cleaner SP200 Solder Tip Cartridges For SP200 System Ì Available in a choice of two temperatures - Select the 600 series for 600 F (330 C), or 700 series for 700 F (390 C) TIP IMAGE SIZE (WxL) mm DESC. TIP SERIES/ ORDER CODE TYPE NO. 600 F 700 F 0.8x15.2 Conical Sharp SSC-X01A 0.8x10.9 Chisel 30 SSC-X25A MX-500DS - SMT Desoldering/Rework At the heart of the MX-500 Systems shown here is the MX-500P Two Port switch mode power supply. The systems available share some common features but differ in the actual handpieces and accessories supplied. The systems can handle both SMT and through-hole soldering/rework with one power supply on the bench. The two switchable outputs, the system can be adapted, using two of the three tools available (soldering iron, Talon tweezers or desolder gun). Some of the items that are supplied with the systems are available to be purchased separately. Ì Uses SmartHeat technology - Maintains a constant tip temperature, automatically delivering the exact amount of power required for the task directly from the heater to the tip Ì Comfortable handpieces - The short tip-to-grip distance improves precision and provides a comfortable grip Ì The tip temperature is determined by the particular series of tip cartridge selected Ì Tip cartridge contains the solder tip, a heater and the wire coil Ì No calibration required Ì 230V ac operation MX-500S - SMT and Rework Supplied with a MX-RM3E handpiece and cord MX-500TS - SMT Rework/Talon System The easy-squeeze design of the Talon tweezers provides superior performance, comfort and optimum control MX-500DS - SMT Desoldering/Rework System Converts shop air into a powerful Venturi vacuum to clean through-holes quickly and efficiently. Paper solder collection liners within the handpiece barrel are easy to maintain and are an improvement upon traditional glass tubes. Note: Requires shop air for desoldering CONTENTS OF EACH SYSTEM MFTRS. LIST DESCRIPTION MX-500S MX-500TS MX-500DS NO. MX-500P Two Port Power Supply Ì Ì Ì MX-RM3E Hand Piece & Cord Ì Ì Ì MX-WS4 Workstand with Sponge Ì Ì Ì AC-YS3 Sponge Ì Ì x 2 AC-CP2 Cartridge Removal Pad Ì Ì x 2 MX-TALON Talon Hand Piece & Cord Ì MX-WS5 DS1/Talon Workstand with Sponge Ì Ì MX-DS1 Desoldering Hand Piece Ì MX-RM8E Desoldering Cord Ì MX-DAH4 ESD Air Hose with Fitting Ì AC-CB1 Cleaning Brush Ì AC-CB2 Tube Cleaning Brush Ì MX-DCFI Chamber Liner & Filter Pack Ì AC-TC Desoldering Tip Cleaner Ì 0.4x11.4 Conical Sharp 2.4x9.9 Chisel x9.9 Chisel x9.9 Chisel x x x x Drag Tip (Mini Hoof) Conical Chisel Conical Sharp Sharp Bent TYPE NO. - For the full List No., X = 0 for the 600 F, and 1 for the 700 F types SSC-X22A SSC-X36A SSC-X37A SSC-X38A SSC-X67A SSC-X71A SSC-X45A SSC-X26A Description Order Code All Tips (Except Mini Hoof) All Order Codes Drag Tip (Mini Hoof) 600 F Drag Tip (Mini Hoof) 700 F In stock and ready to despatch, 300,000 products in our Asia, US and Europe warehouses Tip Cartridges sold separately for each system TIPS FOR THE HANDPIECES - SEE PAGE 1677 (Start of Section) ,000s more products available at Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

15 Farnell Page 1677 Date: time:04: STTC Tip Cartridges For MX and STSS Systems STTC soldering tip cartridges are for use with the MX and STSS soldering/rework handpieces only. They cannot be used with the SP systems, Talon or desoldering handpieces. Ì Available in a choice of two temperatures - Select the 600 series for 600 F (330 C), or 700 series for 700 F (390 C) No. TIP IMAGE SIZE (WxL) mm DESC x13.7 Conical Sharp 2 5.0x7.6 Extra Large Chisel x8.4 Conical Sharp 4 1.0x9.1 Chisel x9.9 Chisel x9.9 Chisel x9.9 Chisel x16.0 Conical Bent x14.7 Bevel x13.2 Micro Fine Tip TIP SERIES/ ORDER CODE 600 F 700 F TYPE NO. - For the full List No., X = 0 for the 600 F, and 1 for the 700 F types TYPE NO. STTC-X06 STTC-X17 STTC-X22 STTC-X25 STTC-X36 STTC-X37 STTC-X38 STTC-X40 STTC-X45 STTC-X90 1. For limited access SMT rework 2. General-purpose SMT and through-hole tip when access is limited 3. Sharp tip cartridge for soldering SMT components or fine wire applications (not for general through-hole tasks) 4. Good for a variety of light soldering tasks. Looking for a surface mount touch-up tip? The STTC-025 should be your first choice 5. For medium to heavy load joints requiring extra reach 6. For a wide variety of tasks. If you are choosing the first tip for your Metcal system, the STTC-037 is ideal 7. A finer version of the STTC-037. Ideal for medium to light through-hole and general surface mount touch-up 8. Tip for soldering SMT components. The bend makes it much easier to work on small circuits and PLCCs 9. An extended length fine tip for surface mount or fine wire applications (not for general through-hole tasks) 10. Microfine tip designed for soldering and touch-up of micro components such as 0201s and 0402s Ì Analogue system Ì High capacity SMT/thru-hole soldering Ì Adjustable C/ F display dial Ì Temperature/Dial lock Power requirements 230VAC, 50HZ, 80W, 0.5A Temp. stability ±1.1 C (±2 F)@ Idle tip temp Dimensions mm 104 x 130 x 152mm Temp. range 204 C C (400 F F) Weight 2.3Kg List No. Order Code ST25-PS ST75E - De- Station Specifications: Operates on Vac, 50Hz Temp. Range 204 C to 482 C 80 Watts max. at 230Vac, 50Hz Temp. Stability ±1.1 C at idle from set tip temp Order Code ST , ,0.77 1, ST75 System , , , ST75 Station Only ST115E SX - Desoldering Station 88 x 171 x 254mm PS90 Handpiece with Stand Pace Handpieces Ì Rugged, highly durable metal housing Ì Bench mounting bracket Ì Permaground System - To ensure permanent tip to ground Ì Self contained de-soldering station Ì SX 80 de-soldering handpiece Ì Static safe Ì Requires no calibration Ì Auto snap-vac increases heater/tip life Ì Quiet vacuum pump Ì Wide range of tips available Ì Accepts any pace sensa temp handpiece (not included) Ì SMT/Thru-hole re-work when additional handpieces specified Ì Digital Sensa Temp Desoldering station complete with SX-80 handpiece and stand Ì Static safe Ì Low profile alu extruded case with modular stacking capabilities Ì Quiet vacuum pump Ì Digital LED temp readout Ì Colour coded temp control keys Ì Auto-Off safety system Ì Temperature setback Ì Auto Snap-Vac increases heater/tip life Ì Wide range of tips available Power Supply 230V ac, 50Hz Temp Range 204 C to 482 C Power Output 80W max Tip to ground resistance 2 ohm max. Weight 4kg List No. Order Code ST115E SX , , , ST115E SX AU , , , Description Order Code Tip Cartridges All Order Codes Pace Solder and De- Stations Temperature Controlled Station ST25-PS90 Ì Compatible with all Pace systems Ì SensaTemp technology: a high performance control system Ì PermaGround tips - to ensure permanent tip to ground Ì SMD removal and installation Ì Quick tip change Ì Quick heater change Ì Static safe Order Code PS Heater assembly Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (65) ,000 products, stocked and ready to despatch 1677

16 Farnell Page 1678 Date: time:04: Pace /De- Tips PS80 Iron Tips Single Point Tips with 3/16" Shank Diameter TIPS (w/part NUMBER) TIP DESCRIPTION ORDER CODE 1/64" Conical Order Code Handpiece only Handpiece + Tip and Tool Stand Replacement Heater Element Collection Chamber, PK Tip Cleaning Kit TT65 Surface Mount Removal Tips 1/32" Conical SURFACE MOUNT CHIP COMPONENT REMOVAL TIPS TIP DESCRIPTION TIP SIZE MFTRS. LIST NO. ORDER CODE 1/32" Chisel /16" Chisel Chip Component (Vertical) A = 0.08* (A = 2mm) P /16" Chisel Single Sided Chisel /64" Angled Fine Point Conical Chip Component A = 0.017" P (A = 0.43mm) Mini-Wave Fine Patch Mini-Wave Standard SOIC, SOJ/SIMMs Component A = 0.7* P (A = 17.8mm) SURFACE MOUNT REMOVAL TIP DESCRIPTION (suggested application) TIP SIZE A X B MFTRS. LIST NO. ORDER CODE PLCC REMOVAL TIPS DESCRIPTION (suggested application) TIP SIZE A x B MFTRS. LIST NO. ORDER CODE 0.14" x 0.08" (2.56mm x 2.03mm) P PLCC-44, PQFP x 0.57" (14.5mm x 14.5mm) P PLCC-52, PQFP x 0.67" P ( 17mm x 17mm) SOIC-8 (JEDEC) 0.019" x 0.200" (5.05mm x 5.08mm) P PLCC-68, PQFP x 0.86" (21.9mm x 21.9mm) P Pack Quantity = 1 Pair Order Code Order Code Pack Quantity= SX-80 De- Tool Ì Compatible with ST75X Ì Rugged and durable construction Ì Ease of maintenance Ì Efficient heat delivery Ì Platinum temperature sensor Ì Disposable flux/solder trap holder Ì Plug-in heater module Ì Uses the wide selection of Endura tips Pace Spares Spares For Irons and Stations Order Description List No. Code Heater Elements SX-70 Desolder Tool P TP P TJ P TT-65 With Sensor P TT-65 without sensor P Tip and Tool Stand SX P TT P TP P TJ P Replacement Sponges (3) SX-70 Handpiece Glass Chamber P ,000s more products available at Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

17 Farnell Page 1679 Date: time:04: Order Description List No. Code Glass Chamber Filter (10) P ST75 Station Visifilter Element(10) P HW 100/TW 100 TC100 Handpiece Cord Assy P Tip Case P Tip Cartridge Stand P General 3/16" Wire Brush P Ersa /Desoldering Stations Station SMT Unit 60A Technical data supply unit Power Supply: Output: Temperature Range: Technical data soldering iron micro tool Supply: Weight: Heat up time: Length Connection lead: Technical data thermal tweezer pincette 40 Supply: Weight: Heat up time: Length Connection lead: Rework Station 80 Ì and desoldering station Ì Suitable for soldering, SMD soldering, Desoldering and Repair Ì Electronic temperature control Ì LED operation indicator Station contains supply unit, soldering iron micro tool with tip 212BD, thermal tweezer pincette 40 with two tips 2ED and 2 supports 230V 50/60Hz 60W 150 C to 400 C (continuous) 24V ac 25g 50s 1.2m high flexible 24V ac 75g 60s 1.2m high flexible List No. Order Code 1+ Station SMD UNIT 60A , Ì Multifunctional, electronic controlled soldering and desoldering station Ì All round station for repair work on SMD Ì Integrated vacuum placer Ì Integrated vacuum pump Ì Precise metering of hot-air stream Ì All four SMD tools can be used at the same time and controlled independently Ì Supplied with UK style and European Schuko power cord Station contains control unit for soldering iron and desoldering tweezers, control unit for hot air soldering and desoldering iron, soldering iron mirco tool CTA20 with tip MicroWell for installing FinePitch components, desoldering tweezers TC40, vacuum placer VAC-Pen, hot-air iron HSP80, foot switch FES820, 3 supports A29 and one support A30. Technical data control unit Power Supply: Output Air Volume Safety transformer and vacuum compressor are integrated Temperature Range SMD soldering iron: Temperature Range Hot Air/Desoldering iron: Technical data soldering iron micro tool CTA20 Supply: Weight: Heat up time: Length connection lead: Technical Data Desoldering tweezers TC40 Supply: Weight: Heat up time: Length connection lead: Technical data hot air iron HSP80 Supply Heat up time 50/60Hz 240W max. 7 l/m 180 C to 450 C(continuous) 150 C to 450 C(continuous) 24V ac 25g 50s 1.2 high flexible 24V ac 75g 50s 1.2 high flexible 24V ac 50s List No. Order Code 1+ REWORK , Antex Irons & Power Supplies Fixed Temperature Irons Models M, C, CS & XS 25W, 24V ac Plug-In Variable Temperature Iron Models A545, TCS Ì Complete range of thermally balanced soldering irons to meet production line and laboratory requirements Ì Polycarbonate handles Ì Conforms to BS3456 section 2.14 Ì All mains irons are fitted with suitable plugs Ì 24V versions are fitted with mini 3 pin plug for connection to Antex power supplies Ì Fitted with 1.8m, 3 core, PVC insulated cable Ì CS irons are available with silicone rubber cables fitted with a mini 3 pin plug Model M C CS XS Power (watts) Operating tip temperature 370 C 370 C 390 C 0 C Tip type (fitted) No. of bit options Overall length Tip-to-handle length Handle length Diameter Cable material PVC PVC PVC or PVC Silicone rubber Input voltage options dc ac ac ac FOR SUITABLE 24V ac POWER SUPPLY SEE ORDER CODE Plug Voltage Cable Type List No. Order Code V ac PVC UK M V ac PVC EURO M230E V ac PVC UK C V ac PVC EURO C230E V ac PVC - CS18-24V V ac Silicone - CS18S-24V V ac PVC UK CS V V ac PVC EURO CS18-230VE V ac Silicone UK CS18S-230V V ac Silicone EURO CS18SE V ac PVC - XS25-24V V ac PVC UK XS25-115V V ac PVC UK XS25-230V V ac PVC EURO XS25-230VE Ì 24V ac at a maximum power rating of 25W Ì Plugs directly into 13A socket Ì Low voltage to provide additional operator safety in applications where bench space is limited Ì Suitable for use with CS and XS (Antex)irons or any other 24V ac, 25W soldering iron fitted with a 3 pin plug H=85, W=68, D=55 Input Voltage 240Vac Power Output 25W Output Voltage 24Vac Order Code Ì Temperature controlled irons provide the ideal solution when precise soldering temperatures are not required Ì Uses surface mount technology Ì Temperature adjusted using a small blade screwdriver Ì Temperature range between 200 C and 450 C, graduated in 50 C increments Ì Proportional voltage control for consistent stable temperatures and zero voltage switching to eliminate arching and transients Ì 24V version fitted with mini 3 pin plug for connection to Antex 650PS power supply Ì 230V irons fitted with suitable mains plug Ì Both irons are fitted with 1.5m, 3core PVC mains cable and 1100 tip Barrel length (inc. tip)=80, Handle length=140, Handle dia.=33 Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (65) ,000 products, stocked and ready to despatch 1679

18 Farnell Page 1680 Date: time:04: Power 50W Control Accuracy ±1% Temperature Range 200 C to 450 C Leakage Current <5µA Warm up time 60s to 350 C List No. A = , TCS240= Voltage Plug Type Colour Order Code V ac Grey V ac UK Yellow V ac Euro Yellow Surface Mount Kit Ì Comprehensive kit comprising 12 desoldering tips Ì Designed to fit most surface mount component outlines (see below) Ì Suitable for CS, TCS, XSD, XSTC, TC50 and SD50 irons Kits Ì Range of pre-packed soldering kits Ì Kits contain a soldering iron, the ST6 stand, length of solder and a H How to solder booklet Ì Mains plug included Kit SK2 SK5 SK6 Tip type (fitted) Plug Order Type List No. Code W Euro Kit with C230 iron Euro SK2E W UK Kit with CS iron UK SK W Euro Kit with CS iron Euro SK5E W UK Kit with XS iron UK SK W EURO Kit with XS iron Euro SK6E Chips 1206/ 1210/1812/ 0805 MELF SOD 80/ TC Station Transistors SOT23/143/89 H = 17 (excl. tips), W = 65, D = 119 SO8 Small Outline IC SO14/16 Antex Stations D-PAK List No. Order Code DKIT Antex Iron Tips Ì All replacement tips are iron and chrome plated (except ) Ì Offer longer life than standard iron and bright nickel tips Tip Dia Tip Style mm in G C C X & S S M Iron type Approved compatibility C S T C X S T C T C S X S D A List No. Order Code / 250 Ì ÌÌÌÌ / 40 Ì Ì / 40 ÌÌÌÌ / 40 Ì / 64 Ì Ì / 64 Ì ÌÌÌÌ / 32 ÌÌ / 32 Ì ÌÌÌÌ / 32 Ì / 32 Ì / 32 Ì Ì / 32 Ì Ì ÌÌ Ì ÌÌÌÌ Ì Ì Temperature controlled soldering station 65 C to 450 C Ì Thumbwheel potentiometer setting Ì Power On and Power to Iron indication Ì Supplied with TC50, 50 watt soldering iron and ST6 bench holder Ì Can be used with optional TC25 25 watt soldering iron Ì Available with UK and European plug fittings Ì Uses 1100 series tips Mftrs List No. Plug Type Order Code Stations 660-TC UK TCE Euro TC25 25W TC 50 50W SD Station Static Dissipative Ì / 32 Ì Ì / 16 Ì Ì / 16 Ì ÌÌÌÌ / 16 Ì Ì ÌÌÌÌ Order Code All Order Codes Ì Temperature controlled soldering station 65 to 450 C Ì Static dissipative Ì Digital readout with choice of many languages Ì Multi-programmable with 2 memory settings Ì Lockable settings with PIN security Ì C or F readout Ì Dial in bit selection for accurate offset Ì Diagnostics Ì Supplied with SD50 50 watt static dissipative soldering iron and ST6 bench holder Ì Available with UK and European plug fittings ,000s more products available at Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

19 Farnell Page 1681 Date: time:04: List No. Plug Type Order Code Stations 690-SD UK SDE EURO Replacement Iron SD50 50 watt Surface Mount Rework Kit Spares For use with List No. Order Code Elements A245 A245E C250 C250E CS24 CS24E CS240 CS240E CSTC CSTCE TCS240 TCS240E XS24 XS24E XS115 XS115E XS240 XS240E XSTC TC 50E Handles C Sponges ST4, ST5, ST6, TCSU The Antex surface mount rework station is an entry level station which gives the user the ability to remove most component types without damage to the circuit board or surrounding components. Each rework tool is heated to the exact temperature required by the component by means of a microprocessor control inside the soldering station. Ì A cost-effective solution to desoldering SMT components Ì Most package sizes available Ì 12 desoldering tools included with the kit Ì 50 watt ESD safe soldering iron and station Ì Also includes soldering iron stand and rework tool holder Desoldering tools included in the kit ST6 and ST4 Reference Package DST-A 1206/1210 DST-B 1812 DST-C 0805 DST-D MELF, SOD 80/87 DST-E SOT23/143 DST-F SOT89 DST-G IC S08 DST-H IC S014/16/QFP 10 x 5 mm DST-K various + re-soldering 1107 various + re-soldering DST-Q ICS020/QFP 15 x 8 mm DST-S ICS028/QFP 20 x 8 mm Irons List No. Order Code Rework Station UD82D Spares for Antex Equipment Stations Temperature Controlled 220V/240V Irons Pro s Kit - Irons Technical Data Supply Unit: Power Supply: 220Vac/240Vac Power Consumption: 50W Temperature Range: 250 C to 480 C, 470 F to 900 F Insulation Resistance: 100MΩ Warm up Time: 30secs to 250 C Size of Station L:175mm, W:103mm, H90mm Length Connection Lead: 1.15m For replacement tips, see below List No. Order Code 1+ 6PK-976B Quick Heat Ceramic Iron 20W/200W Ì Slanted front panel for easier viewing Ì Temperature adjustable between 250 C C Ì Quick start circuit that enable heating up quickly to desired values Ì LED indicator Ì Supplied with European plug Ì Not for use in Hong Kong ST6 ST4 ST6 Ì Industrial styled bench stand Ì Allows simple iron-parking and cool handle performance Ì Made from high grade phenolic with a melting point above soldering iron tip temperatures Ì Incorporates slip-resistant feet, screw holes for permanent positioning and a ballast weight for added stability Ì Adjustable iron holder to fit all Antex and most standard irons ST4 Ì Lightweight construction Ì Manufactured from high grade, high temperature PHENOLIC Ì Can be screwed to any work surface Ì Suitable for all Antex fixed temperature irons Ì Replacement sponge available Order Code ST ST Replacement Sponge Ì A high quality long lasting ceramic type heater Ì Iron plated tip Ì Features a fast-heating button for thermal recovery Ì Supplied with European plug Supply: Output: Temp. range: Warm-up time: 220V/240V 20W/200W 340 C-380 C 90s to 280 C-340 C (Without Using the fast heating button) 30s to 280 C-340 C (Using the fast heating button) List No. Order Code 1+ iron 1PK-SC109B Per Pack Price Per Pack Replacement tips 1+ Standard tip 9SC116-B-F Special sharp tip 9SC-116-SB-F Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (65) ,000 products, stocked and ready to despatch 1681

20 Farnell Page 1682 Date: time:04: Weller Portable Gas Irons WP60K Gas Iron kit Portasol Portable Gas Irons Gas Iron - Portasol Gas Iron Pyropen Junior, Self Igniting Ì Ergonomic handle Ì 3 functions: soldering, hot air and blow torch Ì Approximately 1 hours operation on full reservoir Ì Gas level sight glass Ì 500 C when used as a soldering iron Ì 650 C when used as a hot air blower Ì 1300 C when used as a blow torch WP60K Contents: WP60 Gas soldering iron, 0.5mm soldering tip, hot blow nozzle, hot knife tip and protective cap Price Each List No. Order Code 1+ WP60K Kit Tips 1.0mm Tapered mm Chisel mm Spade mm Chisel Hot Blow Nozzles 4.7mm Dia *Fitted as standard Tip width = 1.0mm Tip width = 4.8mm L=175, Dia=19 Note: For safety reasons the iron is supplied discharged of gas Tip width = 3.2mm Tip width = 2.4mm Ì Economical, pocket sized portable soldering iron Ì Temperature variable up to 400 C Ì Heat output equivalent to a 10 to 60W soldering iron Ì Powered by standard butane lighter fuel Ì One refill gives up to sixty minutes continuous use Ì Safety gas cut off cap incorporating a flint lighter Ì Tips incorporate a catalytic converter for flame-free general purpose soldering Ì Unit is supplied with a 2.4mm tip, with a range of replacement tips available FOR SUITABLE GAS SEE ORDER CODE Order Code Portasol iron Replacement 1.0mm tip Replacement 2.4mm tip* Replacement 3.2mm tip Replacement 4.8mm tip *fitted as standard Ì Self igniting butane gas operated soldering iron Ì Adjustable gas flow gives equivalent 15W to 60W output Ì Approximately 1 hours operation on full reservoir Ì Heat up time is 30 seconds Ì Can be fitted with hot blow nozzles Ì Not supplied with gas List No. Order Code Pyropen WSTA Tips 1.0mm Needle* WPT mm Chisel WPT mm Spade WPT mm Spade WPT Hot Blow Nozzles 1.5mm Dia. WPT mm Dia. WPT *Fitted as standard Gas Iron - Portasol Professional Kit Gas Iron Pyropen Peizo Kit - Self Igniting Ì Supplied in a robust, hinged metal case, complete with a soldering iron support and a cleaning sponge Ì Temperature range 300 C C Ì Functions as a soldering iron, or hot air blower Kit contents: Self igniting butane powered soldering iron, 3mm chisel soldering tip (Mftr s No ), hot blow nozzle (Mftr s No ) and an accessory pouch, containing heat shrink kit, wrench and butane refill canister. Ì Self igniting piezo ignition Ì Gas level indicator Ì Approx. 3 hours operation from each fill Ì Uses WPT series tips Ì Uses WHC series hot blow nozzles List No. Order Code Pyropen Kit Case H = 35, W = 230, D = Ì Versatile, fully portable heat tool kit Ì Runs off standard butane lighter fuel Ì Single refill lasts up to 90 minutes Ì Variable heat control Ì Safety gas cut off cap with integral flint igniter Ì Kit contains a pocket sized gas tool and four special purpose screw-in tips, gas tool stand and cleaning sponge, all housed in a tough polypropylene carry case Standard Tip Ì Output power 10-60W Ì Catalytic convertor for flame free general purpose soldering Hot knife tip Ì Also contains catalytic convertor Ì Ideal for use on plastics, nylon and synthetic materials Blow torch tip Ì Up to 1300 C operating temperature Ì For light brazing, heavy soldering and plastic working Hot blow tip Ì Up to 400 C operating temperature Ì Suitable for heat shrinking, defrosting and rapid drying over small areas Ì Not supplied in kit FOR SUITABLE GAS SEE ORDER CODE ,000s more products available at Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

21 Farnell Page 1683 Date: time:04: Note: Professional tips are not interchangeable with other models. Order Code Portasol professional kit Replacement tips 1.0mm mmÅ mm mmÅ Hot knifeå Blow torchå Hot blow Å Supplied with kit Gas Iron SuperPro Ì Butane gas powered soldering iron, fitted Ì Piezo automatic ignition with a 2.4mm soldering tip Ì tip temperature C Ì Equivalent to a 75W electric soldering iron Ì 60 minutes continuous use Ì Variable temperature, multi-function tool Kit Contains: Iron fitted with 2.4mm soldering tip, flame tip, hot air tip, knife tip, stand, sponge and tray. List No. Order Code Iron XG Iron Kit XG075KT Vulkan Portable Gas Irons P100 Gas Irons Tip width =1.0mm Tip width =2.4mm Case H=45, W=295, D= Tip width = 3.2mm Tip width = 4.8mm Hot Blow Ì GS-TUV accredited gas soldering iron and kit PS100 Ì Gas iron equivalent to a 120W electric iron Ì Long life metal catalyst Ì Simple replacement flint igniter in the safety cap Ì Translucent and shatterproof fuel tank giving gas level indication Ì Solid steel soldering tip Ì Variable adjuster to fine control fuel usage from 45 mins at max to over 90 min Ì Self venting refill valve for easy gas refill Ì Weighs only 50 grams Tip width = 1.0mm Tip width = 2.4mm Antex Portable Gas Irons Gascat 75P Gas Iron Tip width = 3.2mm Tip width = 4.8mm Knife tip Ì High performance fully portable heat tool Ì Power output of 25 to 125W Ì Medium to heavy duty soldering applications Ì Maximum tip temperature of 580 C Ì Blow torch with maximum temperature output of 1200 C Ì Ideal for heat shrinking, defrosting and rapid drying over small areas Ì Use of knife tip allows unit to be used as versatile cutting tool Ì Tip design encloses and protects catalytic converter from damage Ì For user convenience includes a piezo ignition system Ì Stainless steel reservoir holds sufficient gas for 2 hours continuous use on mid setting Kit Contains: 1 iron, 1 soldering tip, 1 hot air tip, 1 Knife tip and a sponge tray. FOR SUITABLE GAS SEE ORDER CODE Order Code SuperPro Kit SuperPro Iron Replacement Tips Chisel 1.0mm tip Chisel 2.4mm tip Chisel 3.2mm tip Chisel 4.8mm tip Hot Blow tip Å Screwdriver 1.0mm tip Screwdriver 2.4mm tipå* Screwdriver 3.2mm tip Screwdriver 4.8mm tip Å Knife tip Å Å Supplied with kit * Fitted as standard Note: For safety reasons the iron is supplied discharged of gas P100KX - Kit contents: P100 gas iron complete with 2.4mm chisel tip, safety cap & flint igniter, aluminium tray, stand & wetting sponge, tube of solder, blow torch tip (VT-5), hot air tip (VT-6), hot knife tip (VT-4), desoldering pump all complete in a plastic tool box. List No. Order Code Iron P Iron Kit P100KX Replacement Tips Fine Point VT mm Chisel VT mm Chisel VT mm Chisel VT Hot Knife VT Blow Torch VT Hot Air VT Weller Portable Ni-Cd Powered Iron Battery Iron - WC100 H = 29, W = 30, L = 122 (body only) Ì Cordless 15W soldering iron ideal for technicians and field service engineers Ì Heats up in 6 seconds, maximum temperature in excess of 800 F Ì Fully charged in 12 hours. Long life nickel cadmium batteries Ì Supplied with battery charge Ì Built in worklight List No. Order Code iron inc. batteries, charger & all 3 tips WC Replacement rechargeable batteries (two required) GP200SCKHB Order Code Iron Battery Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (65) ,000 products, stocked and ready to despatch 1683

22 Farnell Page 1684 Date: time:04: WC100 Iron Tips Order Code Desoldering pump Spare tip Soldapullt DS 017/DS 017LS Pointed (Standard) W=1.5, L=63 Aids Hook/Knife Fork/Spike Blunt W=2.5, L=63 Accessories Long pointed W=0.8, L=63 List No. Order Code Dimensions: Ø = 26 L = 240 Weight 130g Ì Heavy-duty spring loaded desoldering gun Ì Push-button trigger Ì DS017LS constructed from low static material for charge -sensitive applications Ì Spare washer suitable for both versions Order Code Standard DS017 gun Spare nozzle Antitstatic DS017LS gun Spare nozzle Spare washer Scraper/Wire brush L=175 Ì Plastic moulded hexagon handles Ì Hardened steel shafts each bearing a formed tool Ì Ideal for use in board repair, component replacement and track modification Ì Provides a total of six functions. See below Brush: For cleaning connections before soldering. Scraper: Hardened steel shafts each bearing a framed tool. Knife: For cutting PCB tracks. Hook: For component and lead extraction. Fork: Fits wire up 22swg. For wrapping and unwrapping etc. Spike: For hole cleaning and marking Soldapullts US 340 SS 011 SS 350 Order Code WDC Dry-Cleaner The solution for cleaning from Leadfree Solder When using lead-free solder, an increased oxidation of the wettable area of the tip will be experienced. These oxides must be removed regularly otherwise it will make the tip completely unwettable and no longer usable. The conventional method for cleaning with a wet sponge is often not applied with the required attention. With the WDC dry tip cleaner the surplus solder can be removed by tapping the tip on the soft edge of the collector box. The final cleaning is then done by pushing and turning the tip in the metal wool. After cleaning there is still a fine layer of solder on the tip avoiding fast oxidation of the iron layer. Ì The holder is antistatic Ì SS 011 desolder gun ergonomically designed with full stroke plunger L=210, Ø=20, Weight=85g Ì US 340 gun for service, ideal for tool boxes, lightweight, antistatic L=205, Ø=30, Weight=75g Ì SS 350 metal desolder gun, heavy duty, antistatic L=225, Ø=20, Weight=45g Order Code SS 011 gun Spare nozzle Spare washer US 340 gun Spare nozzle SS 350 gun Spare nozzle Spare washer Soldapullt PT 209 Description List No. Order Code WDC Dry Cleaning System Spare Metal Wool (Pk 2) Price Per Pack Description Order Code WDC Dry Cleaner Spare Metal Wool (Pk 2) Desoldering Pump Desoldering Guns Ì Metal construction Ì Anti-static tip / Dimensions Ø = 25 Weight L = 220 (not triggered) 110g Ì Lightweight spring loaded desoldering gun Ì Push-button trigger Ì For routine desoldering Order Code PT 209 gun Spare nozzle Spare washer Overall length = 195mm TEE431/ ,000s more products available at Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

23 Farnell Page 1685 Date: time:04: Lightweight, Low Cost Anti-Static Version Standard Anti-static Standard Anti-static L=202, Dia=26 Ì Soft action desolder gun Ì Lightweight plastic housings Ì Recessed release button to prevent accidental operation Ì Housing separates to provide access for cleaning Ì Available in standard or anti-static versions Ì Anti-static version complies with European standards concerning static sensitive components CECC15 Order Code Standard gun Spare nozzle assembly Anti-static gun Spare nozzle assembly L=192, Dia=22 Order Code Standard gun Spare PTFE nozzle Spare neoprene washer Spare nylon washer Spare circlip Spare main spring Spare ejector pin (For old style gun) L=155, Dia= List No. Order Code Standard gun 7874B Spare nozzle 7875B Mains Powered Desoldering Guns Motorised with Variable Hot Blow Static Dissipative H=190, W=40, D=205 Voltage 230V ac 50/60Hz Temperature range 350 C to 500 C Pump capacity (open) 15 litres/minute Weight 0g Power consumption 120W List No. SC7000Z= Order Code Desoldering gun , , Spares Hot blow cartridge Cleaning pins (set of 3) mm dia tip mm dia slim tip mm dia ultra-slim tip mm dia tip mm dia tip Element Filter cartridges (pk of 5) Stand Spares for Obsolete SC5000 & SC5000A Element Bench Top Fume Absorber Fume Extraction Systems DENON Ì Motorised desoldering gun with variable hot blow facility Ì Static dissipative housing is fitted with a low vibration, motorised diaphragm pump Ì Value to select suction or variable hot blow Ì 100W ceramic element Ì Electronic temperature controller adjustable between 350 C and 500 C Ì LED to indicate operating temperature Ì On/off power switch within hand grip Ì Fitted with a 1mm desoldering tip, 1.5m mains lead and 13A plug. Supplied with two replacement filter cartridges and a selection of six tip clean out tools Ì For bench top use during hand soldering applications Ì High performance fan Ì Activated carbon filter Ì Absorbs flux and lead fumes Ì Simple filter replacement Ì Supplied with 3 filters Ì Light duty hand soldering only Standard Ì Single handed operation L=190, Dia=20 Order Code Micro Spare neoprene washer Standard Spare Neoprene Washer L=193, Dia=20 Ì Lockable spring loaded plunger Ì Removes by suction all the solder from around the joint allowing exchange of components Not recommended when using Rosin based flux solders. Input Voltage 230V ac Weight 1.5Kg Dimensions 220mm(W) x 168mm(D) x 270mm(H) Mains Cord Length 1m Filter Dimensions 130mm(W) x 10mm(D) x 130mm(H) /Pack Order Code Fume Absorber Filters (Pack of 5) Make Farnell-Newark InOne your first choice - search over 300,000 products at Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (65) ,000 products, stocked and ready to despatch 1685

24 Farnell Page 1686 Date: time:04: Adjustable Arm Fume Absorber Input Voltage Dimensions (mm) Filter Dimensions (mm) Weight (kg) Mains Cord Length (m) Input Power Min. Air Flow Max. Air Flow Filter Size Weight Dimensions (HxWxD) 230V 220(W) x 168(D) x 270(H) 130(W) x 10(D) x 130(H) 1.80kg 1m /Pack Order Code Fume Absorber Filters (Pack of 5) DLX Fume Extractor Ì Provides greater versatility during hand soldering applications Ì Flexible arm mounts easily to almost any bench, or desk Ì High performance fan Ì Activated carbon filter Ì Absorbs flux and lead fumes Ì Simple filter replacement Ì Supplied with 3 filters 230V ac 95 cu.ft/min 115 cu.ft/min 130mm 1.6kg 200x162x120mm Price Per Pack Description Order Code DLX Fume Extractor Spare Filters (2 Pk) BVX-208 Fume Extraction System Up to 8 Stations Ì Built-in high efficiency, low noise, brushless mini fan Ì Easy to replace carbon filter Ì Quickly removes smoke and fumes Ì Reflector hood diverts air away from working area Designed mainly for solder fumes and incorporates both pre and main filters which can be changed independently to maximise the working life of each filter. The main filter has a HEPA efficiency greater than 99.97%, plus an activated carbon filter to remove additional gases. Ì Eight station design for dynamic fume extraction Ì High performance extraction of solder fumes directly from the tip of the hand soldering iron Ì Designed for under-bench installation Ì Ducting system offers a simple, flexible low cost solution for faster configuration of tip extraction installations Contents of the BVX-208 Kit ( ): Extraction unit, Pre, HEPA and Gas filters, adaptor for hose Note: DSO3-902 has a tube, hose, metal clip and S clip - The DSO3-929, DSO3-930 and DSO3-931 have a tube, plastic clip, hose and S clip Max. Number of Stations 8 Weight 9kg Flow Rate (With Filter) 28 l/min Dimensions (HxWxD) 388x508x254mm Noise Level <55dBA Voltage Vac 50/60Hz Accessory - BTX Connection Kit Contents Item Description Connection Kit Max number of Stations when using 5.6mm Tubes BTX-CK BTX-CK In-Line 2 4 Back to Back 4 8 Qty Qty 1 Flexible Hose ø32mm 2.5m 7.5m 2 Coupling with two Glands 5.6mm End Plug T-Piece Connector for 35mm Hose Duct Clip (32mm) Roll of Vinyl Tape 1 1 The maximum number of Stations is only one half of the above rating when using 8mm tubes Description Pack List No. Order Code Price Per Pack Extraction Unit 1 BTX , Accessories Hose Connection Kit (1-4 Stations) 1 BTX-CK Hose Connection Kit (1-8 Stations) 1 BTX-CK Iron Adaptor Kit (Weller TCP) 1 DS Iron Adaptor Kit (OKI MX and Weller 1 DS WS) Iron Adaptor Kit (OKI SP200) 1 DS Iron Adaptor Kit (OKI PS800) 1 DS Spring, Stand Adaptor Kit (Weller) 1 DS03-902S Replacement Accessories Pre-Filter (Pk of 5) 5 FP-BVX Main Filter, HEPA 99.95% Carbon 1 FM-BVX Extraction Unit for up to 8 Stations Iron Adaptor Kit for OKI MX, SP200, PS800 and Weller WS (Iron not included) Iron Adaptor Kit for Weller TCP (Iron not included) 1,000 s of products added every month, check out the very latest products, news and information at: The very latest NEW products Spring, Stand Adaptor Kit, Weller BTX Duct Connection Kits The BTX-208 fume extraction system is a tip extraction unit with a high vacuum blower motor and a capacity for up to eight workstations. The unit s universal hose connection kit provides maximum flexibility and eliminates the need for a traditional layout and design of tip extraction ducting. The compact design and easy set-up make it truly portable ,000s more products available at Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

25 Farnell Page 1687 Date: time:04: Fume Extraction Kit - Arm Evac 200 Ì Reduces health risks Ì Compact and self contained Ì Efficient 3 stage filter Ì Easy filter access Ì Includes pre filter and general purpose HEPA/GAS filter Ì Heavy duty brushless motor Ì High volume air flow Ì Expansion kit for upgrade to two workstations available Ì Supplied with both UK and European mains leads Expansion Kit Ì Arm Evac 200 Fume Extraction Unit Ì 75mm flex arm with fume scoop Ì Flex Arm bench mounting bracket Ì 2.5m flexible hose Contents (kit) Ì 75mm flex arm with fume scoop Ì Flex Arm bench mounting bracket Ì 2.5m flexible hose Fume Displacement Unit Ì Designed to remove soldering fumes away from the operator and the immediate working area Ì High capacity recirculating fan Ì Dispatches 94.1cu ft/min Ì Activated charcoal impregnated filter Note: The unit is supplied with an IEC mains inlet and requires the addition of a suitable plug and lead as listed below Order Code Fume displacement unit Filter new type 120 x Filter old type 120 x Mains Leads UK Mains Cord Lead, European 2.5M, Black Lead, Australian 2.5m Black Lead, Italian 2.5m Black Lead, Danish 2.5m Black Lead, Swiss 2.5m Black Fume Extraction Spares - Arm Evac 200 Bofa Fume Extraction System Dimensions (W D H) 280 x 330 x 395 mm Weight 14 kg Sound Level 59 2m (6 ) Order Code Fume Extraction Kit , Expansion Kit Order Code Pre Filters (Pk Qty 5) General Purpose Filter (HEPA/GAS) Adhesive Filter Ì Range of high quality fume extraction systems Ì Designed to meet the requirements of COSHH and HSE legislation Ì Efficient and cost effective solutions to solder, glue solvent and fume pollution Ì Full HEPA and gas filtration ( down to 0.3 microns) Ì Easy to install First you need to decide whether you need Tip, Arm or Cowl extraction: Tip Arm Cowl Medium/light PCB Heavy soldering, Intricate Solder at bench level, gluing or general soldering Solder pot, glue and solvent and drying Tip Extraction Step Choose the appropriate extraction unit and installation kit to suit the number of operations needing protection. All units come complete with pre-filter and combined filter as standard. System 1 Order Code Unit , , , Per Filter (pk5) Combined Filter No installation required System 8 Unit , , , Per Filter (pk5) Installation Kit System 15 Unit , , , Per Filter (pk5) Combined Filter Installation Kit Solda-Mop Desoldering Braid Width Length Order Code mm 1.5m mm 1.5m mm 10m mm 30m mm 1.5m mm 10m mm 30m Soder-Wick Lead Free SD Desoldering Braid Size Width Application 2 1.5mm Small parts, SMDs 3 2.0mm Medium pads 4 2.8mm Large pads For desoldering electronic joints and electrical connections quickly, safely and efficiently. Solda-Mop is a specially impregnated wick and when solder becomes molten it is immediately drawn up into Solda-Mop leaving a clean joint ready for resoldering. It usually requires only one second to efficiently desolder a joint or connection. Solda-Mop eliminates flux spatter and damage to components through excessive heat which occurs with the old method. Board may then be cleaned with Servisol Aero-Klene. A fast, safe desoldering braid specifically for use with lead free applications Ì Engineered specifically for high temperature, lead-free solders Ì Transfers heat to the solder joint more quickly and efficiently than conventional desoldering braids Ì Specifically designed for all lead-free solders Ì Can also be used with Tin/Lead solders Ì Soder-Wick Lead-Free packaged in ESDsafe static dissipative bobbins Ì Minimises the risk of damage associated with static electricity Ì Non-corrosive ultra high purity no-clean flux Ì Will not leave ionic contamination on the boards Ì Especially effective at removing residual solder from SMT pads Ì RoHS Compliant Ì Patent Pending Ì Available individually or in a VacuPak vacuum sealed can which contains 10 bobbins with 1.5m of braid on each bobbin Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (65) ,000 products, stocked and ready to despatch 1687

26 Farnell Page 1688 Date: time:04: Solder-Wick Desoldering Braid / Width Length Pack Price Per Pack List No. (mm) (m) Order Code Singles VacuPak of 10 Bobbins SW SW SW Ì Manufactured by industry leader through patented process Ì Open weave design offers optimal heat transfer and quicker wetting Ì Soder-Wick No Clean SD braid features non corrosive halide free low solids flux Ì Soder-Wick Rosin SD braid flux is non corrosive, and will not contaminate board Ì Packed on individual static dissipative bobbins Ì VacuPak contains 10 bobbins sealed in an inert gas blanket Ì Resealable to keep braid fresh until used Width Length List No. (mm) (m) Order Code Solder-Wick No Clean SD (Singles) Solder-Wick Rosin SD (Singles) Per Tin Price Per Tin Solder-Wick No Clean SD (VacuPak ) SW SW SW SW SW Solder-Wick Rosin SD (VacuPak ) SW SW SW SW SW Solder Sucking Wick - No Clean Ì Flexible copper braid designed for desoldering Ì Impregnated with synthetic flux, removing the need for cleaning Ì 1.5m lengths are packed on anti-static reels Ì Wick is inherently anti-static, so lengths cut from larger reels can be used in anti-static environments Width Length (mm) (m) List No. Order Code Anti-Static NC-AA NC-AB NC-BB Non-Anti-Static NC-AA30M NC-AB30M Stick Solder Approximate pack weight = 1kg High Purity Extruded Solid Bar Solder - Stick / Bar Ì 60/40 tin/lead solder stick Ì Low impurity content Ì Improved wetting Ì Increased life of solder in the bath Ì Starts melting at 183 C, fully molten at 215 C Ì Produced to EN29453 grade KP under BS5750 Part 1 Ì Ideal for use in small solder baths Ì Approx. 18 sticks per pack Price Per Pack Order Code Solder Bar, Lead Free Ì 60/40 high purity solder bar Ì Ideal for printed circuit soldering machines, baths and pots Ì Polythene protected Approximate weight=500grams Order Code Ì For solder bath Ì Suitable for dip, selective and wave soldering Ì To EN / Ì Size: Approx. 310x16x5mm In stock and ready to despatch, 300,000 products in our Asia, US and Europe warehouses. Melting Weight Alloy Point approx. (kg) Order Code Sn99Cu1 227 C Sn95.5Ag3.8Cu C ,000s more products available at Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

27 Farnell Page 1689 Date: time:04: Triangular Stick Solder, Lead Free Melting Weight Alloy Temperature ca. (g) Order Code Sn97.0Cu C Sn99.0Cu C Sn95.5Ag3.8Cu C Sn96Ag4 221 C Solder - Lead Free Introduction to Lead Free Ì For solder bath Ì Suitable for dip, wave and selective soldering Ì To EN / Ì Size: approx. 11x11x11x440mm /4362 Lead-free soldering is a requirement that is soon to be mandatory throughout the entire EU. The legislation is now law and becomes effective from July Lead-free in electronics is already an accepted and widely practised process in Japan and is rapidly being implemented worldwide. There are some important issues related to the transition to a lead-free process: 1.Compatibility All soldered surfaces must be free of lead to begin with. This includes both the component and the PCB. Any lead contamination introduced to a lead-free solder joint will significantly reduce the reliability of the joint. 2.Temperature All lead-free alloys melt at a higher temperature than traditional tin/lead alloys (60/40 tin lead is around 180 whereas 99C lead free is around 227 C). This means that the soldering iron temperature may need to be increased and the temperature rating of both components and PCBs needs to be able to withstand these elevated temperatures. These increased temperatures also put greater demand on the flux and it may be necessary to opt for a higher solids content, or more active, flux if the soldering becomes difficult when using lead-free materials. 3.Inspection Lead-free solder joints look a lot different to traditional tin/lead joints. The joints are usually quite dull, and the spread is less - resulting in quite steep contact angles at the perimeter of the solder joint where the solder meets the substrate. This does not mean the joint is faulty. Some studies have proven already that in fact a lead-free solder joint is even more reliable than an equivalent tin/lead joint. 4.Rework or Repair It is essential that any repairs or rework be carried out using lead-free solder also. This means it is necessary to be sure which solder has been used before attempting to rework it. Usually this is clearly marked on a module or PCB. The alloys used in lead-free solder can vary depending on the application, but it is safe to use the 99C alloy (99.7% tin, 0.3% copper) for all lead-free hand soldering as this is compatible with all lead-free alloy options. A trace of silver is added to some lead-free solder pastes to assist with the wetting and joint formation during the rapid reflow phase of typical SMT assembly processes, but even re-working these joints is quite safe using the 99C alloy. Further Assistance For any further assistance or technical support, please contact your local Farnell InOne technical sales team Lead Free (99C) Alloy, 362 Rosin Flux Ì Lead free 99.3% Tin (Sn), 0.7% Copper (Cu) Alloy Ì 227 C Melting point (tip temperature 350 C to 370 C) Ì Contains five cores of mildly activated, noncorrosive 362 rosin based flux Ì Amber coloured (rosin) residues do not require cleaning Ì For all general purpose lead-free electronic assembly and re-work applications Ì Complies with all lead-free legislative requirements Length Order Price Per Reel (m) Code g Reels 1.22mm mm g Reels 1.22mm mm Lead Free (99C) Alloy, 309 Rosin Flux Alloy Lead Free, 99.3% Tin, 0.7% Copper Alloy Flux Type Five cores of Halide-free, non-corrosive 309 Rosin Based Melting Temperature 227 C Tip Temperature (Approx.) 350 C C Price Per Reel Weight Wire Diameter Order Code g Reels 0.5mm mm mm g Reels 0.7mm mm mm Lead Free Alloy, No-Clean Flux Ì Pale coloured residues do not require cleaning Ì Extra wetting ability for faster soldering Ì For all general purpose lead-free electronic assembly and re-work applications Ì Complies with all lead-free legislative requirements Ì Halide free (Zero activation) flux formulation Ì Low fuming and low spitting Ì Minimal clear residues do not require cleaning Ì Complies with all lead-free legislative requirements Ì Suitable for high solderability, lead-free, no-clean assembly, or rework of PCBs assembled in a lead-free no-clean process or that have already been cleaned Alloy 99.3% Tin (Sn), 0.7% Copper (Cu) Alloy Tip Temperature (Approx.) 350 C Melting Temperature 227 C Lead Free Alloy, Rosin Flux Ì Lead free Ì Contains multiple cores of rosin based flux Ì Amber coloured (rosin) residues do not require cleaning Ì For all general purpose lead-free electronic assembly and re-work applications Ì Complies with all lead-free legislative requirements Alloy Lead Free 99.3% Tin (Sn), 0.7% Copper Alloy Tip Temperature (Approx.) 350 C Melting Temperature 227 C Price Per Reel Weight Wire Diameter Order Code g Reels 0.5mm mm mm mm g Reels 0.7mm mm mm Price Per Reel Weight Wire Diameter Order Code g Reels 0.5mm mm mm mm g Reels 0.7mm mm mm Lead Free (99C) Alloy, X39 No-Clean Flux Ì Halide free (Zero activation) flux formulation Ì Low flux content (1% by weight) - low fuming and low spitting Ì Minimal clear residues no not require cleaning Ì Complies with all lead-free legislative requirements Ì Flux residues meet reliability requirements of Bellcore and IPC Class 3 specifications Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (65) ,000 products, stocked and ready to despatch 1689

28 Farnell Page 1690 Date: time:04: Ì Suitable for high solderability, lead-free, no-clean assembly, or rework of PCBs assembled in a lead-free no-clean process or that have already been cleaned Alloy Lead Free, 99.3% Tin, 0.7% Copper Alloy Melting Temperature 227 C Flux Type Halide Free (Zero Activation), No clean Tip Temperature (Approx.) 350 C C Price Per Reel Weight Wire Diameter Order Code g Reels 0.5mm mm mm g Reels 0.7mm mm mm Lead Free Alloy, Mildly Activated No-Clean Flux Ì Mildly activated no-clean flux formulation Ì Increased flux content (3% by weight) - low fuming and low spitting Ì Minimal clear residues no not require cleaning Ì Complies with all lead-free legislative requirements Ì Suitable for general lead-free, no-clean assembly, or rework of PCBs assembled in a lead-free no-clean process Alloy Lead Free, 99.3% Tin (Sn), 0.7% Copper (Cu) Alloy Melting Temperature 227 C Flux Type Mildly Activated No-Clean Tip Temperature (Approx.) 350 C C Price Per Reel Weight Wire Diameter Order Code g Reels 0.5mm mm mm mm g Reels 0.7mm mm mm Lead Free (99C) Alloy, 502 No-Clean Flux Alloy Lead Free, 99.3% Tin, 0.7% Copper Alloy Melting Temperature 227 C Flux Type Mildly Activated (0.2%) formulation, No clean Tip Temperature (Approx.) 350 C C Price Per Reel Weight Wire Diameter Order Code g Reels 0.5mm mm mm g Reels 0.7mm mm mm Lead-Free Alloy, High Activity Rosin Flux Ì Contains multiple cores of halide-free rosin based flux Ì Pale coloured residues do not require cleaning Ì Extra wetting ability for faster soldering Ì For all general purpose lead-free electronic assembly and re-work applications Ì Complies with all lead-free legislative requirements Alloy Lead Free, 99.3% Tin (Sn), 0.7% Copper (Cu) Alloy Flux Type Halide-Free Rosin Based Flux Melting Temperature 227 C Tip Temperature (Approx.) 350 C C Ì Mildly activated (0.2%) flux formulation Ì Increased flux content (3% by weight) - low fuming and low spitting Ì Minimal clear residues no not require cleaning Ì Complies with all lead-free legislative requirements Ì Suitable for general lead-free, no-clean assembly, or rework of PCBs assembled in a lead-free no-clean process Wire Price Per Reel Weight Diameter Order Code g Reels 0.5mm mm mm mm g Reels 0.7mm mm mm Lead Free Alloy, Rosin Flux New alloy: Tin (97.1%), Silver (2.6%), Copper (0.3%) Ì Lead free Ì Contains one core of rosin based flux Ì Amber coloured (rosin) residues do not require cleaning Ì For all general purpose lead-free electronic assembly and re-work applications Ì Complies with all lead-free legislative requirements Alloy Sn97.1Ag2.6Cu0.3 Tip Temperature (Approx.) 350 C Melting Temperature 217 C C Price Per Reel Weight Wire Diameter Order Code g Reels 0.5mm mm mm mm g Reels 0.7mm mm mm Lead Free Alloy, No-Clean Flux New alloy: Tin (97.1%), Silver (2.6%), Copper (0.3%) Ì Halide free flux formulation Ì Contains 5 cores of flux Ì Non-corrosive reliable flux residues Ì Minimal clear residues do not require cleaning Ì Complies with all lead-free legislative requirements Ì Suitable for high reliability, lead-free, no-clean assembly, or rework of PCBs assembled in a lead-free no-clean process Alloy Sn97.1Ag2.6Cu0.3 Tip Temperature (Approx.) 350 C Melting Temperature 217 C C Price Per Reel Weight Wire Diameter Order Code g Reels 0.5mm mm mm mm g Reels 0.7mm mm mm Lead Free Alloy, Mildly Activated No-Clean Flux New alloy: Tin (97.1%), Silver (2.6%), Copper (0.3%) Ì Mildly activated no-clean flux formulation Ì Contains 5 cores of flux Ì Increased flux content (2.7% by weight) - low fuming and low spitting Ì Minimal clear residues, do not require cleaning Ì Complies with all lead-free legislative requirements Ì Suitable for general lead-free, no-clean assembly, or rework of PCBs assembled in a lead-free no-clean process Alloy Sn97.1Ag2.6Cu0.3 Melting Temperature 217 C C Flux Type Mildly activated, no-clean Tip Temperature (Approx.) 350 C C ,000s more products available at Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

29 Farnell Page 1691 Date: time:04: Price Per Reel Weight Wire Diameter Order Code g Reels 0.5mm mm mm mm g Reels 0.7mm mm mm Lead-Free Alloy, High Activity Rosin Flux New alloy: Tin (97.1%), Silver (2.6%), Copper (0.3%) Ì Contains 5 cores of halide-acivated rosin based flux Ì Pale coloured residues do not require cleaning Ì Extra wetting properties for faster soldering Ì For all general purpose lead-free electronic assembly and re-work applications Ì Complies with all lead-free legislative requirements Alloy Sn97.1Ag2.6Cu0.3 Flux Type Halide-acitvated rosin-based flux Melting Temperature 217 C C Tip Temperature (Approx.) 350 C C Wire Price Per Reel Weight Diameter Order Code g Reels 0.5mm mm mm mm g Reels 0.7mm mm mm Lead Free 96SC Alloy, Colophony Free (105) Flux Ì Lead free alloy combined with 105 Colophony-free flux Ì Colophony free fully synthetic flux (no rosin or modified rosin) - non corrosive formulation Ì High activity - fast and sustained soldering on copper and brass Ì Distinctive low odour to distinguish from rosin products Ì 95.5% Tin (Sn), 3.5% Silver (Ag), 0.7% Copper (Cu) Alloy Ì 217 C melting point (tip temperature of 350 C to 370 C) Ì Complies with HSE colophony-free recommendations and all lead-free legislative requirements Ì Suitable for general assembly, or rework processes - operationally and aesthetically similar to traditional rosin fluxes LF320 Lead Free No-Clean Solder Paste / Wire Price Per Reel Diameter Weight Order Code mm 250g mm 250g Ì General purpose for stencil printing applications Ì Wide printing and reflow process windows (air and nitrogen) Ì Good tack performance, excellent slump resistance Ì 96SC (SAC Alloy) Ì No-clean, residues Ì 88% metal content Ì IPC/J-STD ROMO approved Lead Free Solder Wire HS10, Alloy TSC Alloy 96SC (SAC Alloy), 95.5% Tin, 3.5% Silver, 0.7% Copper, 217 C Liquidus /4360 Wire Ø Weight Price per Reel (mm) (g) Order Code Lead Free Solder Wire Alloy TC Ì Sn95,5Ag3,8Cu0,7: best choice for lead free electronics Ì Proven in electronic manufacturing Ì Lowest melting point of alloys with high tin content Ì Eutectic alloy (exact melting point) 217 C Ì Improved wetting Ì Flux type to DIN EN (F- SW26) Ì Sn99Cu1 Ì Proven in electronic manufacturing Ì Favourable price (no silver) Ì Eutectic alloy (exact melting point 227 C) Ì Improved wetting Ì Flux type to EN (F- SW26) Wire Ø Weight Price per Reel (mm) (g) Order Code Size List No. Order Code g M RP11 Lead Free No-Clean Solder Paste 60/40, 40/60 Alloy Ì High activity rosin-based solder paste Ì Rosinous (amber) residues do-not need cleaning Ì Good tack performance and printer open time Ì 96SC (SAC Alloy) 95.5% Tin(Sn), 3.5% Silver(Ag) 0.7 % Copper(Cu), 217 C liquidus) Ì 90% metal content for stencilling, 250g jars Ì Suitable for reflow in air or nitrogen Size Order Code g Jar Solder 60/40 Alloy, 362 Rosin Flux Length Order Price Per Reel mm m Code Ì Contains five cores of mildly activated, non-corrosive 362 rosin based flux Ì Amber coloured (rosin) residues do not require cleaning Ì 60% Tin (Sn), 40% Lead (Pb) Alloy Ì 180 C melting temperature (tip temperature approximately 308 C) Ì For all general purpose electronic assembly and re-work applications Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (65) ,000 products, stocked and ready to despatch 1691

30 Farnell Page 1692 Date: time:05: Length Order Price Per Reel mm m Code Kg Reels /60 Alloy, 362 Rosin Flux Ì Contains five cores of mildly activated, non-corrosive 362 rosin based flux Ì Amber coloured (rosin) residues do not require cleaning Ì 40% Tin (Sn), 60% Lead (Pb) Alloy Ì 234 C melting temperature (tip temperature approximately 354 C) Ì Ideal for general soldering of electronic, television, radio and electronic equipment where higher melting point solder wire is required Length Order Price Per Reel mm (m) List No. Code g Reels D D /40 Alloy, No-Clean Flux SMART Alloy, 362 Rosin Flux 60/40 Alloy, 400 No-Clean Flux Ì Halide free (Zero activation) flux formulation Ì Increased flux content compared to X39 (2.2% by weight) - low fuming and low spitting Ì Minimal clear residues no not require cleaning Ì 60% Tin (Sn), 40% Lead (Pb) Alloy Ì 180 C melting temperature (tip temperature approximately 308 C) Ì Flux residues meet reliability requirements of Bellcore and IPC Class 3 specifications Ì Suitable for general, no-clean assembly, rework of PCBs assembled in a no-clean process, or PCBs that have already been cleaned 60/40 Alloy, 505 No-Clean Flux Ì Mildly activated (0.5%) flux formulation Ì Increased flux content compared to X39 and 400 (3% by weight) - low fuming and low spitting Ì Minimal clear residues no not require cleaning Ì 60% Tin (Sn), 40% Lead (Pb) Alloy Ì 180 C melting temperature (tip temperature approximately 308 C) Ì Suitable for general assembly or rework of PCBs 60/40 Alloy, 511 No-Clean Flux Ì Mildly activated (1.1%) flux formulation Ì 3% flux content (by weight) - low fuming and low spitting Ì High wetting ability - good spread on copper, brass and nickel - for fast soldering Ì Minimal clear residues no not require cleaning Ì 60% Tin (Sn), 40% Lead (Pb) Alloy Ì 180 C melting temperature (tip temperature approximately 308 C) Ì Suitable for general assembly, or rework 60/40 Alloy, 400 No-Clean Flux Price Per Reel 250g Reels Order Code mm g Reels 0.91mm mm /40 Alloy, 505 No-Clean Flux 500g Reels 0.91mm mm /40 Alloy, 511 No-Clean Flux 250g Reels 0.91mm mm g Reels 0.91mm mm Ì Specially designed for Surface Mount and Related Technology applications Ì Contains five cores of mildly activated, non-corrosive 362 rosin based flux Ì Minimal amber coloured (rosin) residues do not require cleaning Ì 62% Tin (Sn), 36% Lead (Pb), 2% Silver (Ag) Alloy Ì Silver loaded alloy to minimise silver leaching from component terminations Ì 179 C melting temperature (tip temperature approximately 320 C) Ì Fine diameter (0.46mm/26swg) - suitable for most SMT assembly, or rework Ì 250g Reel Price Per Reel List No. Order Code SMART /40 Alloy, X39 No-Clean Flux Ì Halide free (Zero activation) flux formulation Ì Low flux content (1% by weight) - low fuming and low spitting Ì Minimal clear residues no not require cleaning Ì 60% Tin (Sn), 40% Lead (Pb) Alloy Ì 180 C melting temperature (tip temperature approximately 308 C) Ì Flux residues meet reliability requirements of Bellcore and IPC Class 3 specifications Ì Suitable for high solderability assembly, or rework of PCBs assembled in a no-clean process, or that have already been cleaned Length Order Price Per Reel mm (m) Code X39, 250g Reels 1.22mm mm X39, 500g Reels 1.22mm mm /40 Alloy, X52 No-Clean Flu Low & High Melting Point Ì High activity flux formulation for fast soldering Ì Non-corrosive - residues do not require cleaning Ì 1% flux content (by weight) - low fuming and low spitting Ì 60% Tin (Sn), 40% Lead (Pb) Alloy Ì 180 C melting temperature (tip temperature approximately 308 C) Ì Suitable for general assembly, or rework in a no-clean assembly process Order Price Per Reel Code g Reels 1.22mm mm g Reels 1.22mm mm Low Melting Point (LMP) Ì Slightly lower melting point than standard 60/40 solder Ì 62% Tin (Sn), 36% Lead (Pb), 2% Silver (Ag) Alloy Ì 2% silver content prevents leaching and the formation of brittle joints during soldering of silver and gold plated surfaces Ì 179 C Melting temperature (tip temperature approximately 299 C) High Melting Point (HMP) Ì Suitable for high working temperature applications (electric motors etc) Ì Can also be used for selective soldering of adjacent components (i.e. a HMP joint will not melt when an adjacent low temperature solder joint is created subsequently) Ì 5% Tin (Sn), 93.5% Lead (Pb), 1.5% Silver (Ag) alloy Ì 301 C Melting temperature (tip temperature approximately 1 C) Length Order Price Per Reel mm (m) List No. Code Low Temperature 179 C 250g Reels 0.71mm 93 DLMP mm 150 DLMP mm 224 DLMP g Reels 1.22mm 63 DLMP mm 165 DLMP High Temperature 301 C 500g Reels 1.22mm 46 DHMP ,000s more products available at Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

31 Farnell Page 1693 Date: time:05: Hydro-X Water Soluble Flux Arax Acid Cored Solder Alusol Aluminium Solder Ì High acidity, high activity, water soluble flux formulation Ì 60% Tin (Sn), 40% Lead (Pb) Alloy Ì 180 C melting temperature (tip temperature approximately 308 C) Ì Fast wetting, no spitting, no insoluble residues Ì Residues MUST be removed quickly and thoroughly by water. No other neutralisers are necessary Ì Active flux to promote rapid, efficient soldering of difficult to solder parts Price Per Reel Order Code g 0.71mm Ì High acidity, high activity, water soluble flux for metal fabrication Ì Suitable for brass, bronze, iron, spring steel, resistance wires and galvanised wire Ì Fast wetting, no spitting, no insoluble residues Ì Not recommended for electronics assembly Ì 60/40 Tin/Lead alloy has 183 C melting temp Ì Lead free tin/silver alloy has 221 C melting temp Tin/Silver Price Per Reel 500g Reels Order Code mm g Reels 1.63mm mm Tin/Lead 500g Reels 1.63mm g Reels 1.63mm Ì Most reliable option for soldering of aluminium and aluminium alloys Ì Highly active - solders virtually all other metals including stainless steel Ì Tin, lead, silver alloy with four cores of the unique Alusol flux Ì Melting range C Price Per Reel Order Code g 0.91mm Ì 88% metal content for screen printing, 90% for stencilling, 500g jars Ì Suitable for reflow in air or nitrogen RP11 Solder Paste Ì High activity rosin-based solder paste Ì Rosinous (amber) residues do-not need cleaning Ì Good tack performance and printer open time Ì Solder alloy consists of 62% Tin, 36% Lead, 2% Silver Ì 90% metal content for stencilling, 250g jars Ì Suitable for reflow in air or nitrogen Type Container Order Code RA10 25g cartridge RA10 25g syringe RM92 (Stencilling) 500g tub RM92 (Screen Printing) 500g tub RP11 250g Tub Lead-Free Flux Dispensing Pen A pen for applying lead-free flux with precision and control. Ì Applies a noncorrosive, halide free, no clean flux for high temperature, lead-free application Ì Can also be used for tin/lead fluxes Ì Flux meets Bellcore TR-N-NWT and IPC SF-818 for Surface Insulation Resistance Ì Flux meets ANSI / IPC J-STD-004, Type ROL0 Size Colour List No. Order Code g Clear Yellow CW Rework Flux Gel Ì Special flux gel designed for re-work of SMT assemblies Ì Optimised for dispensing NC73 Solder Paste Ì Easily removed with Lead-Free Flux Remover Pen, or Flux-Off Lead-Free Flux Remover Ì Excellent material compatibility Ì Fast drying Ì RoHS Compliant Ì Halide-free, no-clean formulation, minimal clear residue Ì Compatible with no-clean assembly and rework processes Pack Quantity=1 Order Code cc Syringe Solder Pastes RA10 Solder Paste Ì Formulated for dispensing Ì Excellent tack life Ì High activity to deal with poor component solderablity Ì Produces safe residues - eliminates the need for cleaning Ì 25g cartridge or 25g syringe (with plunger) options RM92 Solder Paste Ì High activity robust rosin-based solder paste Ì Rosinous (amber) residues do-not need cleaning Ì Good tack performance and printer open time Ì Solder alloy consists of 62% Tin, 36% Lead, 2% Silver Ì No-clean technology for stencil printing applications Ì Suitable for reflow in air and nitrogen Ì Long printer life Ì 62% Tin(Sn), 36% Lead(Pb), 2% Silver(Ag) alloy (179 C liquidus) Ì No-clear, clear residues Order Code g Tub Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (65) ,000 products, stocked and ready to despatch 1693

32 Farnell Page 1694 Date: time:05: Dispenser for 500g Solder Reels Solder Dispensers Surface Mount Solder Fluxes, Pastes & Chemicals Ì Wire is fed through a dispensing tube Ì Friction mount prevents reel running on Ì Suitable for all gauges of 500g reels List No. Order Code SD Solder Paste Dispensers Receivers, Syringes and Nozzles SEMCO SMSP - Surface Mount Solder Paste Ì Silver containing SM solder paste for manual and automatic dispensing Ì Long tack time SMA - Surface Mount Adhesive Ì High green strength adhesive Ì Solvent resistant Ì Thixotropic nature gives high dot profile Ì Medium strength final bond Note: Shelf life is 6 months at 20 C, 12 months at 5 C. Refrigerated storage is recommended. SMFL/SMF - Surface Mount Rework Flux Ì Quick drying flux to aid rework Ì Use prior to desoldering to aid component removal Note: Ì Bright shiny joints Ì May be used as no-clean as residues are non-corrosive Ì Heat curing Ì May be manually or automatically dispensed Ì Store below 5 C Ì MIL approved no-clean flux Ì Non-tacky, non-corrosive residue Aerosol contains flammable contents. Do not use on live equipment or near any source of ignition. Use in a well ventilated area. SOL172/ List No. Order Code ml Syringe SMSP ml Syringe SMA10SL ml Pen SMF12P ml Aerosol SMFL200D Receiver Fully locking universal receiver assembly including receiver head for 10ml or 30/35ml cartridges, air line, clamps and male connector. Fits most makes of syringe. Syringe Comprises of Leurlock barrel and new long series stopper supplied as separate items and available in 10ml and 30ml sizes. Nozzles All Leurlock - 18, 19 & 21 gauges with 6" stainless steel tips and 20 & 21 gauge maximum flow tapered plastic tips. Tip Cap To prevent leakage or evaporation of syringe contents. Order Code Universal Receivers 10ml ml Order Multiple= Syringe Barrels 10ml ml Syringe Stoppers Long series 10ml Long series 30ml Nozzles 18 Gauge Nozzle Stainless Steel (Pink) Gauge Nozzle Stainless Steel (Brown) Gauge Nozzle Stainless Steel (Green) Gauge Tapered Plastic (Pink) Gauge Tapered Plastic (Clear) Tip Cap Spot-On Peelable Solder Resist Flux Pen Refillable Ì Designed to be used in conjunction with non-corrosive Ersin (rosin) or Xersin (multicore synthetic resin) fluxes which do not require removal by washing after soldering Ì Material dries to a thinner coating Ì Can be used undiluted but, can be thinned with up to 50% of water for spraying and brushing Ì Material dries in 40 mins at 80 C (176 F) or 2 hours at ambient temperature Ì Supplied in a 250ml bottle Note: The maximum operating temperature for Spot-On is 275 C for 1 minute. Any hotter or longer may cause problems with removal after soldering. Order Code BONKOTE Ì Refillable pen sized tool for applying liquids Ì Sealed cartridge prevents evaporation Ì Brush fibre tip for controlled application Ì Ideal for applying flux but may be used in many applications Capacity 7ml Contains parts made from Tip length 14mm Polypropylene Tip diameter 4.3mm, tapers to a point Polyester Polyethylene List No. Order Code BON ,000s more products available at Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

33 Farnell Page 1695 Date: time:05: Tip Tinner/Cleaner - TTC1 Ì Quick and effective method of cleaning and re-tinning de-wetted soldering irons Ì Compacted disc of electronics grade solder powder and chemicals Ì Will remove stubborn tin/iron intermetallic layer that forms on iron plated tips and resists rosin based fluxes Ì Contains non-corrosive chemicals with a low evaporation point leaving no residues Ì Single wipe of the iron across the surface cleans/wets and tins the tip at once List No. Order Code TTC Finex PF Latex Powder Free Typical applications Length Thickness Ì Low particle levels reduces risk of product contamination Ì Special processing reduces proteins and toxins which in some people can cause sensitisation and irritation Ì Strong - made from 100% natural rubber latex Ì Rolled cuff for when a beaded cuff is preferred Ì Ambidextrous - fits either hand Ì Provides maximum sensitivity, dexterity and comfort Ì Suitable for food handling Electronics, laboratory, veterinary, pharmaceutical and medical 24cm 0.15mm (single wall measured at palm) HS Gloves Per Pack Price Per Pack Size Order Code Micro Jet and Micro Therm Heat Shrink Guns Fast access to over 300,000 products Over 125,000 technical datasheets Technical attribute search Quick buy facility Instant order confirmation Ì Pocket size high quality blow torch and thermal heat gun Ì Piezo auto ignition Ì Built in safety lock Ì Fuelled by a common refillable cigarette lighter (supplied) Micro Jet Ì Instant 1300 C microflame Ì Ideal for soldering, paint removal and disassemly Micro Therm Ì Flameless heat gun Ì 650 C flameless heat Ì Ideal for use with heat shrink tubing and for general heating and drying applications Order Code Micro Jet Micro Therm Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (65) ,000 products, stocked and ready to despatch 1695