Number of Way Type Power PN16/40 Flanges DIN JIS ANSI Flanges Control Low Noise
|
|
|
- Rose Norman
- 6 years ago
- Views:
Transcription
1 Via Lecco, 69/ AGRATE BRIANZA (MI) Tel. 039/ Fax 039/ PRODUCTS TYPE Face to face DIN Number of Way Type Power PN16/40 Flanges Face to Face ANSI DIN JIS ANSI Flanges 2 way single seat Control 2000 AD AR 5000 AD- AR 2 way single seat Control 2200 AD AR 5200 AD AR Low Noise AD AR AD AR 2 way single seat On-off Pneumatic 2100 AD AR DE 5100 AD- AR- DE 2 way double seat Control AD AR 3 way mixing Control 2600 AD AR 5600 AD AR 3 way diverting Control 2700 AD AR 5700 AD AR 2 way single seat Control 2000 EP 5000 EP 2 way single seat On-off 2100 EP 5100 EP 2 way double seat Control Electric EP 3 way mixing Control 2600 EP 5600 EP 3 way diverting Control 2700 EP 5700 EP 1 di 6
2 BODY GROUP CODES Type DN Material Flanges Packing - Bonnet Gasket Plug 20= = = = = = = = = = = = = = = =DN =DN =DN =DN =DN =DN =DN =DN =DN =DN =DN =DN200 A= EN GJL 250 B= B=ASTM A 216 WCB C= CF8M S= SG Iron GGG40.3 D16=PN16 D40=PN40 A15=ANSI 150 A30=ANSI 300 J10 = J10K J20 = J20K T = PTFE bonnet std TG = PTFE+graph b. std G = graphite bonnet std PT = PTFE finned PTG = PTFE.+gr. finned PG = graphite finned ST = PTFE+PN16 bellow* STG = PTFE/GR+PN16 bellow* SG = graphite+pn16 bellow* * bellow std. PN 16 T = PTFE E = Europil E = ( DN Spiromet. ) 1=EQP/EQV/MFS 2=PL/LV/MFP 2=LINEAR CAGE 3=PT/VPT 4=PT-PTFE 5=PT-PTFE-GR A D16 T T 1 PNEUMATIC ACTUATOR GROUP CODES Actuator Type Stroke Signal DN T1 = T200 T2 = T250 T3 = T310 T4 = T400 T5 = T500 C11 = 11 mm C19 = 19 mm C28 = 28 mm C50 = 50 mm 315 = 3-15 psi 618 = 6-18 psi 630 = 6-30 psi 35 = 35 psi 26AD = 2-6 bar AD version 26ARFA = 2-6 bar AR version (fluid opens) 26ARFC = 2-6 bar AR version (fluid closes) DE = double effect 1520 = DN 15/ = DN 25/ = DN 40/ = DN 65/ = DN = DN125/200 T1 C ELECTRIC ACTUATORS (VOLTAGE OPENS AND CLOSES) GROUP CODE Type Motor Supply Potentiometer Positioner DN EP 1 = PSL = PSL = PSL = PSL = PSL = PSL = PSL = PSL 325 A = 220 V 50 Hz B = 110 V 50 Hz C = 24 V 50 Hz D = 24 V cc E = 380 V 50 Hz P0 = none P1 = PD P2 = PD P3 = PD P4 = PD P5 = PD P0 = none PA = PSAP 220 V PB = PSAP 110 V PC = PSAP 24 V 1520 = DN 15/ = DN 25/ = DN 40/ = DN 65/ = DN = DN125/200 ELECTRIC ACTUATORS WITH SPRING RETURN Type AFV234SF232 (for type 2000 EPR all diameters / for type 2700 EPR DN ) AFV234SF132 (for type 2600 EPR all diameters / for type 2700 EPR DN 15-20) 2 di 6 DN 1520 = DN 15/ = DN 25/ = DN 40/ = DN 65/ = DN = DN125/200 EP 1 A P1 PA 1520 EP 3 B P3 P0 100 AFV234SF
3 REDUCED BORE CODES ( available for every types but LOW NOISE 2200/2300/2400/5200/5300/5400 see pag.3 ) Red. Body type DN Bore plug Bellow Stellited 015 = DN 15 M18 = MFP 1/8 M316 = MFP 3/16 M14 = MFP 1/4 M38 = MFP 3/8 S ST 020 = DN 20 B114 = BF 1 FLUTE 1/4 (MFS) B214 = BF 2 FLUTES 1/4 (MFS) B138 = BF 1 FLUTE 3/8 (MFS) R 2S = 2 way single seat 2S = 2 way single seat 2D= 2 way single seat 020 = DN = DN = DN = DN = DN = DN = DN = DN = DN = DN = DN 200 B238 = BF 2 FLUTES 3/ = DN 15 EQP PLUG 0152 = DN 15 PL PLUG 0153 = DN 15 PT PLUG 0201 = DN 20 EQP PLUG 0202 = DN 20 PL PLUG 0203 = DN 20 PT PLUG 0251 = DN 25 EQP PLUG 0252 = DN 25 PL PLUG 0253 = DN 25 PT PLUG 0321 = DN 32 EQP PLUG 0322 = DN 32 PL PLUG 0323 = DN 32 PT PLUG 0401 = DN 40 EQP PLUG 0402 = DN 40 PL PLUG 0403 = DN 40 PT PLUG (MFS) 0501 = DN 50 EQP PLUG 0502 = DN 50 PL PLUG 0503 = DN 50 PT PLUG 0651 = DN 65 EQV PLUG 0652 = DN 65 LV PLUG 0653 = DN 65 VPT PLUG 0801 = DN 80 EQV PLUG 0802 = DN 80 LV PLUG 0803 = DN 80 VPT PLUG 1001 = DN 100 EQV PLUG 1002 = DN 100 LV PLUG 1003 = DN 100 VPT PLUG 1251 = DN 125 EQP / EQV PLUG 1252 = DN 125 PL PLUG 1253 = DN 125 PT PLUG 1501 = DN 150 EQP / EQV PLUG 1502 = DN 150 PL PLUG 1503 = DN 150 PT PLUG R 2S R 2S 015 B114 S ST R 2S ST NOTE : the body group code must always be with 1-end ( for MFS / BF) and 2-end (for MFP) With bellow only - For stellited reduced bore only 3 di 6
4 LOW NOISE REDUCED BORE CODES 2200/2300/2400/5200/5300/5400 Red. Body Type DN Bore plug Stellited 020 = DN = DN = DN 15 Linear cage plug ST 22 = Type = DN = DN 20 Linear cage plug 52 = Type = DN = DN 25 Linear cage plug 040 = DN = DN 32 Linear cage plug 050 = DN = DN 40 Linear cage plug R 23 = Type 2300 / = Type 5300 / = DN = DN = DN = DN = DN = DN = DN 32 Linear cage plug 0402 = DN 40 Linear cage plug 0502 = DN 50 Linear cage plug 0652 = DN 65 Linear cage plug 0802 = DN 80 Linear cage plug 1002 = DN 100 Linear cage plug 1252 = DN 125 Linear cage plug 1502 = DN 150 Linear cage plug For stellited reduced bore only R R ST R ST 4 di 6
5 STELLITED SEAT+PLUGS CODES Stellited DN Plug Type ST 015 = DN = DN = DN = DN = DN = DN = DN = DN = DN = DN = DN = DN 200 M18 = MFP 1/8 M316 = MFP 3/16 M14 = MFP 1/4 M38 = MFP 3/8 B114 = BF 1 FLUTE 1/4 B214 = BF 2 FLUTES 1/4 B138 = BF 1 FLUTE 3/8 B238 = BF 2 FLUTES 3/8 1 = DN 15/50 EQP PLUG 2 = DN 15/50 PL PLUG 3 = DN 15/50 PT PLUG 1 = DN 65/100 EQV PLUG 2 = DN 65/100 LV PLUG 3 = DN 65/100 VPT PLUG 1 = DN 125/200 EQP/EQV PLUG 2 = DN 125/200 PL PLUG 3 = DN 125/200 PT PLUG 222 = DN 15/50 linear cage plug Type = DN 65/100 linear cage plug Type 2300 / = DN 15/50 linear cage plug Type = DN 65/200 linear cage plug Type 5300 / = DN 50/200 EQP/EQV PLUG Type = DN 50/200 PL PLUG Type = DN 50/200 PT PLUG Type 5800 ST STELLITED GUIDE BUSH CODE Stellited Bush DN = DN 15/100 ST B = DN 125/200 ST B di 6
6 2 WAY SINGLE SEAT SOFT SEAL CODES Soft Seal TS Soft seal material DN Plug Type T = PTFE TG = PTFE/GR 015 = DN = DN = DN = DN = DN = DN = DN = DN = DN = DN = DN = DN 200 M18 = MFP 1/8 M316 = MFP 3/16 M14 = MFP 1/4 M38 = MFP 3/8 B114 = BF 1 FLUTE 1/4 B214 = BF 2 FLUTES 1/4 B138 = BF 1 FLUTE 3/8 B238 = BF 2 FLUTES 3/8 1 = DN 15/50 EQP PLUG 2 = DN 15/50 PL PLUG 3 = DN 15/50 PT PLUG 1 = DN 65/100 EQV PLUG 2 = DN 65/100 LV PLUG 3 = DN 65/100 VPT PLUG 1 = DN 125/200 EQP PLUG 2 = DN 125/200 PL PLUG 3 = DN 125/200 PT PLUG 222 = DN 15/50 linear cage plug Type = DN 65/100 linear cage plug Type 2300 / = DN 15/50 linear cage plug Type = DN 65/100 linear cage plug Type 5300 / 5400 TS TG PN 25 PN 40 BELLOWS CODES Bellow Bellow rating DN of body valve Suffix = DN 15/ = DN 25/ = DN 40/50 065C19 = DN 65 stroke 19 mm 065C28 = DN 65 stroke 28 mm 080C19 = DN 80 stroke 19 mm S P25 = PN C28 = DN 80 stroke 28 mm Blanc = standard P40 = PN C19 = DN100 stroke 19 mm X = AISI C28 = DN100 stroke 28 mm 125 = DN = DN = DN200 S P di 6
7 UNIWORLD series VALVES Assembling system for 2 Way single seat valve COMP2VS/E ELECTRIC POWERED ACTUATOR WITH SPRING RETURN PNEUMATIC ACTUATOR ELECTRIC POWERED ACTUATOR SUITABLE FOR PNEUMATIC AND ELECTRIC POWERED ACTUATOR STANDARD FINNED EXTENDED BELLOW SEAL PLUGS WITH METAL OR SOFT SEAL MICROFLOW (without plug locknuts) EQUAL PERCENTAGE LINEAR QUICK LIFT PLUG LOCKNUTS BODY GASKET BODY face to face ANSI - JIS BODY face to face DIN GASKET BOTTOM FLANGE Via Lecco, 69/ AGRATE BRIANZA (MI) Tel. 039/ Fax 039/
8 UNIWORLD series VALVES Assembling system for 2 Way double seat valve COMP2VD/E ELECTRIC POWERED ACTUATOR PNEUMATIC ACTUATOR SUITABLE FOR PNEUMATIC AND ELECTRIC POWERED ACTUATOR STANDARD FINNED EXTENDED BELLOW SEAL PLUGS WITH METAL SEAL PINNED TO THE STEM EQUAL PERCENTAGE LINEAR QUICK LIFT GASKET BODY FACE TO FACE ANSI JIS FLANGED DIN ANSI - JIS GASKET BOTTOM FLANGE Via Lecco, 69/ AGRATE BRIANZA (MI) Tel. 039/ Fax 039/
9 UNIWORLD series VALVES Assembling system for 3 Way mixing valve COMP3VM/E ELECTRIC POWERED ACTUATOR WITH SPRING RETURN PNEUMATIC ACTUATOR ELECTRIC POWERED ACTUATOR SUITABLE FOR PNEUMATIC AND ELECTRIC POWERED ACTUATOR STANDARD FINNED EXTENDED BELLOW SEAL UPPER SEAT V PORT LINEAR METAL SEAL PLUGS QUICK LIFT PLUG LOCKNUTS GASKET BODY FACE TO FACE ANSI - JIS BODY FACE TO FACE DIN GASKET STUD PIPE LOWER SEAT Via Lecco, 69/ AGRATE BRIANZA (MI) Tel. 039/ Fax 039/
10 UNIWORLD series VALVES Assembling system for 3 Way diverting valve COMP3VD/E ELECTRIC POWERED ACTUATOR WITH SPRING RETURN PNEUMATIC ACTUATOR ELECTRIC POWERED ACTUATOR SUITABLE FOR PNEUMATIC AND ELECTRIC POWERED ACTUATOR STANDARD FINNED EXTENDED BELLOW SEAL NUT WASHER UPPER PLUG V PORT LINEAR UPPER PLUG QUICK LIFT STEM BODY FACE TO FACE ANSI - JIS GASKET BODY FACE TO FACE DIN LOWER PLUG V PORT LINEAR LOWER PLUG QUICK LIFT GASKET PLUG LOCKNUTS STUD PIPE Via Lecco, 69/ AGRATE BRIANZA (MI) Tel. 039/ Fax 039/
11 UNIWORLD series PLUGS PROFILES DIAGRAM GRAFIC01/E SINGLE SEAT TWO WAY The american unit CV (flowrate in USGPM with 1 psi of differential pressure) and the metric one KV (flowrate in m3/h with 1 bar of differential pressure) declared in the technical documentation, have been tested by a research center, recognized by Ministry of Works, Ministry of Industry, ICIM and member of ASTM, EUROLAB, UNI, or have been compared, with method of calculation, to the certified CV and KV. Ø 1/8 - microflow Ø 3/16 - microflow Ø 1/4 - microflow Ø 3/8 - microflow Via Lecco, 69/ AGRATE BRIANZA (MI) Tel. 039/ Fax 039/
12 UNIWORLD series PLUGS PROFILES DIAGRAM SINGLE SEAT TWO WAY The american unit CV (flowrate in USGPM with 1 psi of differential pressure) and the metric one KV (flowrate in m3/h with 1 bar of differential pressure) declared in the technical documentation, have been tested by a research center, recognized by Ministry of Works, Ministry of Industry, ICIM and member of ASTM, EUROLAB, UNI, or have been compared, with method of calculation, to the certified CV and KV. Specifications given are only indicative and not binding for the manufacturer who reserve the right to carry-out any modification deemed necessary without prior notice..
13 UNIWORLD series PLUGS PROFILES DIAGRAM SINGLE SEAT TWO WAY GRAFIC02/E The american unit CV (flowrate in USGPM with 1 psi of differential pressure) and the metric one KV (flowrate in m3/h with 1 bar of differential pressure) declared in the technical documentation, have been tested by a research center, recognized by Ministry of Works, Ministry of Industry, ICIM and member of ASTM, EUROLAB, UNI, or have been compared, with method of calculation, to the certified CV and KV. Via Lecco, 69/ AGRATE BRIANZA (MI) Tel. 039/ Fax 039/
14 UNIWORLD series PLUGS PROFILES DIAGRAM SINGLE SEAT TWO WAY The american unit CV (flowrate in USGPM with 1 psi of differential pressure) and the metric one KV (flowrate in m3/h with 1 bar of differential pressure) declared in the technical documentation, have been tested by a research center, recognized by Ministry of Works, Ministry of Industry, ICIM and member of ASTM, EUROLAB, UNI, or have been compared, with method of calculation, to the certified CV and KV. Specifications given are only indicative and not binding for the manufacturer who reserve the right to carry-out any modification deemed necessary without prior notice.
15 UNIWORLD series PLUGS PROFILES DIAGRAM SINGLE SEAT TWO WAY GRAFIC03/E The american unit CV (flowrate in USGPM with 1 psi of differential pressure) and the metric one KV (flowrate in m3/h with 1 bar of differential pressure) declared in the technical documentation, have been tested by a research center, recognized by Ministry of Works, Ministry of Industry, ICIM and member of ASTM, EUROLAB, UNI, or have been compared, with method of calculation, to the certified CV and KV. Via Lecco, 69/ AGRATE BRIANZA (MI) Tel. 039/ Fax 039/
16 UNIWORLD series PLUGS PROFILES DIAGRAM SINGLE SEAT TWO WAY The american unit CV (flowrate in USGPM with 1 psi of differential pressure) and the metric one KV (flowrate in m3/h with 1 bar of differential pressure) declared in the technical documentation, have been tested by research center, recognized by Ministry of Works, Ministry of Industry, ICIM and member of ASTM, EUROLAB, UNI, or have been compared, with method of calculation, to the certified CV and KV. Specifications given are only indicative and not binding for the manufacturer who reserve the right to carry-out any modification deemed necessary without prior notice.
UNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
PNEUMATIC VALVES HYGIENIC series
PNEUMATIC VALVES HYGIENIC series 1200AD/E 01 2004 SINGLE SEAT TWO WAYS PED 97/23/CE Art.3 Section 3 TYPE 1200 AD Normally open Air closes DESCRIPTION The 1200 HYGIENIC pneumatic control valves are with
PNEUMATIC VALVES HYGIENIC series
PNEUMATIC VALVES HYGIENIC series 1500AD/E 01 2004 THREE WAY DIVERTING CONTROL VALVES PED 97/23/CE Art.3 Section.3 Type 1500 AD TYPE 1500 AD Normally closed port C on air failure C = CLOSE A-B = OPEN DESCRIPTION
Series 2003 / Three-way control valve. Features. Wörth am Main
Series 2003 / 2013 Three-way control valve SPECIFICATION The Series 2003 / 2013 comprises a range of skirt guided Three-way mixing (2003) and diverting valves (2013). Available in a variety of sizes, they
Control Valves Series 2000 Heavy Duty valve 2 way
Series 2000 Heavy Duty valve 2 way Technical data Size (DN) DN 15 150 Pressure rating PN16, PN40 ANSI 300 Connections Flanges UNI/DIN PN16, PN40 Flanges ANSI 300 Type sealing Metallic (Class IV - V), soft
Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
3-way control valve in mixing and diverting design
with electric and pneumatic actuators 3-way control valve in mixing and diverting design 1/2-6 STEVI 450 / 451 Electric actuator Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices
SPIRA-TROL 1/2" to 4" ANSI Two-port KEA, KFA and KLA Control Valves
1/2" to 4" ANSI Two-port KEA, KFA and KLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
SPIRA-TROL 1/2" to 4" ANSI Two-port LEA, LFA and LLA Control Valves
1/2" to 4" ANSI Two-port LEA, LFA and LLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
PNEUMATIC CONTROL VALVES V403 DN65 DN100 (V403 globe valves series with linear actuators PA or EL series)
PNEUMATIC CONTROL VALVES V403 DN65 DN100 (V403 globe valves series with linear actuators PA or EL series) DESCRIPTION The PV403 control valves are three-way valves for mixing or diverting service. The
Series 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244
Series 240 Electric Control Valve Type 3241/3274 Globe Valve Type 3241 Electric Control Valve Type 3244/3274 Three-way Valve Type 3244 Application Versatile control valves with globe or three-way valve
Series 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
CE43 1" (DN25) to 4" (DN100) Carbon Steel Cage Design, Two Port Control Valves
Globe 13 CE43 1" (DN25) to 4" (DN) Carbon Steel Cage Design, Two Port Description The CE43 series is a range of carbon steel two port, cage trim, control valves conforming to ANSI B16.34, ASME VIII standards
ADCATROL Pneumatic Control Valves PV25G (V25G globe valves series with linear actuators PA series)
ADCATROL Pneumatic Control Valves PV25G (V25G globe valves series with linear actuators PA series) DESCRIPTION The PV25G control valves are single seated, two-way body constructed with in-line straight
SPIRA-TROL Two-port Control Valves ASME Standard KEA, KFA and KLA ½" to 8"
SPIRA-TROL Two-port Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME standard. These valves are available in three body materials in sizes
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE 1-6940 Cryo valves are especially designed for cryogenic service. The construction is the same of 1-6941 and 1-6943 standard globe valves with the exception of
Series 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size DN 15 to 300 Nominal pressure
Series 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244
Series 240 Pneumatic Control Valves Type 3244-1 and Type 3244-7 Three-way Valve Type 3244 DIN and ANSI versions Applications Mixing or flow-diverting valves for use in process engineering and industrial
3-port valves. pneumatically actuated
3-port valves pneumatically actuated Pneumatically actuated valves for quality and accuracy in fluid control The Spirax Sarco range of QL valves and pneumatic actuators are designed to give a comprehensive
Type 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.
Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing
Series 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
BALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 516 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AD C D E F Kg AS C D
Series 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size 15 to 300 Nominal pressure
VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
BALL VALVE SERIES Pneumatic actuator - Actreg
FIGURE: ADA: Pneumatic actuator, double acting ASR: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BALL VALVE - 254 SERIES Pneumatic actuator -
STEVI 450 / way control valve in mixing and diverting design DN
STEVI 450 / 451 with electric and pneumatic actuators 3-way control valve in mixing and diverting design DN 15-150 STEVI 450 / 451 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel
Type 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
CONTROL VALVE STANDARD SPECIFICATION
CONTROL VALVE STANDARD SPECIFICATION QUICK CHANGE TYPE 2-WAY GLOBE VALVE YAD-122Q1 Series http://www.proval.co.kr PROVAL Co., Ltd. [B-1] TOP GUIDE SINGLE SEATED TYPE GENERAL The design of Quick Change
Balanced and Multi-stage Trim Options for Spira-trol TM Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Kämmer Series Low Flow Valves
flowserve.com Kämmer Series 030000 Low Flow Valves Description Kämmer series 030000 low flow valves are designed for precision controlling up to PN40. The body is a precision casting for high finishing
1 GENERAL AND SAFETY INFORMATIONS
INDEX 1 GENERAL AND SAFETY INFORMATIONS 1 2 INSTALLATION INSTRUCTIONS 1 2.1 Installation in the plant general inf. 1 2.2 Pneumatic valves installation 2 2.3 Electric powered valves installation 2 2.3.1
BOSS Series D Control Valve
Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as
ZH series linear actuator control valve. ZHP type Single Seat Series
ZH series linear actuator control valve ZHP type Single Seat Series DATIAN CONTROL VALVE Nowadays with the development of the modernized industrial automatic controlling system progressing, the requirement
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
Type 1a Globe Control Valve
PTFE-lined Type 1a Globe Control Valve Application: PTFE-lined control valve for corrosive media, particularly for severe requirements in chemical applications: Valve sizes DN 25 to 150 or NPS 1 to 6 Pressure
SPIRA-TROL. DN15 to DN50. LE, LF and LL Two-port Control Valves
Page 1 of 10 Cert. No. LRQ 0963008 ISO 9001 SPIR-TROL DN15 to DN100 LE, LF and LL Two-port Control Valves TI-P303-11 CH Issue 2 Description SPIR-TROL is a range of two-port single seat globe valves with
High Temperature Valve 8024
High Temperature Valve 8024 with integrated positioner GS 3 series DN15 up to DN250 Pneumatic control valve with integrated positioner for the control of neutral through to highly aggressive media Space
STEVI 440 / 441. Straight through control valve DN
with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.
Balanced and Multi-stage Trim Options for SPIRA-TROL Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
KP-28 & KT-28 Two Way Control Valve Technical Manual
KP-28 & KT-28 Two Way Control Valve Technical Manual Features 1. Modulating and open/close functions with electric or pneumatic actuators and others for selection. 2. Compact design and trim structure
LESLIE CLASS DLO(S)-2 CAGE-RETAINED TRIM CONTROL VALVES ANSI CLASS
LESLIE CLASS DLO(S)-2 CAGE-RETAINED TRIM CONTROL VALVES ANSI 25-300 CLASS Page B Leslie s Class DLO(S)-2 cage-retained control valves are designed for general purpose control of clean, dirty, viscous or
Pneumatic Control Valves Mark 70 Sliding Gate Control Valves. Sliding Gate Control Valves. 3L/T-2R/S33 Series Mark 70 Series.
3L/T-2R/S33 Series Mark 7 Series Sliding Gate Control Valves The Mark 7 Series is a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of
Balanced and Multi-stage Trim Options for SPIRA-TROL Two-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
CONTROL VALVE STANDARD SPECIFICATION
CONTROL VALVE STANDARD SPECIFICATION ON-OFF 2,3-WAY GLOBE VALVE YAD-112Q1/11231 Series YAC-31231 Series YAC-31281 Series http://www.proval.co.kr [B-8] GENERAL The single soft seat control valves are designed
Series 240 Types PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve
Series 240 Types 3241-1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve ANSI version Application Control valves for PSA plants (Pressure Swing Adsorption) s NPS ½ to 6 Pressure rating
Data Sheet T EN
Data Sheet T 8015-1 EN Series 240 Types 3241 1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve Application Control valves for PSA plants (Pressure Swing Adsorption) Valve sizes DN
BUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic
B C D FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return BUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic G F L The pneumatic actuator is calculated for 6
Pneumatic Control Valves Mark 70 Sliding Gate Control Valves. Sliding Gate Control Valves. 3L/T-2R/S33 Series Mark 70 Series.
3L/T-2R/S33 Series Mark 7 Series Sliding Gate Control Valves The Mark 7 Series is a line of pneumatically-operated diaphragm control valves that combine multiple spring actuators with the precision of
Control valve - 3-way with flanges (3-way mixing valve / 3-way diverting valve) DN 200 and 250
with electric and pneumatic actuators Control valve - 3-way with flanges (3-way mixing valve / 3-way diverting valve) DN 200 and 250 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches Handwheel
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T Reversible pneumatic actuator
21000 Series. Masoneilan* Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities
GE Oil & Gas Technical Specifications 02/2016 Masoneilan* 21000 Series Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB* and Anti-Cavitation Capabilities Table of Contents Numbering System...3
Control Valve 23 / 24 Single-seat straight-way valve with exchangeable seat ring
Change from one to two columns Data Sheet 10/138.29EN Rev. B Control Valve 23 / 24 Singleseat straightway valve with exchangeable seat ring Size DN 15... DN 100 With pneumatic actuator Verschiedene Gehäusewerkstoffe
PARCOL SERIES CONTROL VALVES
PAROL -9 SERIES ONTROL VALVES PAROL -9 SERIES ONTROL VALVES The line of PAROL -9 series control valves provides the most versatile globe body type single seat available with heavy top guiding design.
KP-28 & KT-28 Two Way Control Valve
CRN-CANADA PASCO KP-28 & KT-28 Two Way Control Valve Fluid Control For Sustainable Future Features 1. Modulating and open/close functions with electric or pneumatic actuators and others for selection.
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator Application Control valves designed for mechanical and plant engineering. Suitable for liquids, gases and steam Nominal size
Series 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve
Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design
General Stem-Guided Control Valves
Control and Shut-Off Valves Variety of Trim Designs in Different Materials Electric and Pneumatic Actuators as Standard General Stem-Guided Control Valves Sizes ½" - 12" (15mm - 300mm) ANSI Class 150-900
STEVI 440 / 441. Straight through control valve DN
with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.
General Stem-Guided Control Valves
Control and Shut-Off Valves Variety of Trim Designs in Different Materials Electric and Pneumatic Actuators as Standard General Stem-Guided Control Valves Sizes ½" - 12" (15mm - 300mm) ANSI Class 150-900
T 8053 EN Type and Type Pneumatic Control Valves Type 3252 High-pressure Valve
T 8053 EN Type 3252-1 and Type 3252-7 Pneumatic Control Valves Type 3252 High-pressure Valve Application Control valve especially designed for controlling low flow rates in process engineering Valve sizes
Series W&T Pneumatic Control Valve Type RVG Globe valve and angle valve
Series W&T Pneumatic Control Valve Type RVG Globe valve and angle valve Application Control valve for feedwater and steam applications in power plant engineering and the petrochemical industry Nominal
Type and Type Pneumatic Control Valves Type 3510 Micro-flow Valve
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve ANSI version Application Control valve especially designed for controlling low flow rates in pilot plants and technical research
BCV Blowdown Control Valves DN15 to DN50 (½" to 2")
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
21000 Series Control Valves
GE Oil & Gas Technical Specifications 09/2012 Masoneilan * Valves 21000 Series Control Valves Complete Line of Rugged, Top Guided, Globe Valves with Lo-dB * & Anti-Cavitation Capabilities Table of Contents
BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
Baumann 24000S Stainless Steel Control Valve
24000S Valve Product Bulletin Baumann 24000S Stainless Steel Control Valve The Baumann 24000S versatile, pneumatic, control valve may be used for the control of pressure, temperature, level, and flow.
Series 2000 Top Guided Control Valve
Series 2000 Top Guided Control Valve Series 2000 Control Valve Series 2000 process Control Valves. Sturdy design with special service trims available for: Cavitation Control Noise Reduction Top entry construction
ZEUS type BRONZE PNEUMATIC ACTUATED VALVE
CHARACTERISTICS The ZEUS bronze pneumatic actuated valve is dedicated to the automatic shut-off of fluid pipework. The full bore angle body and the great flow rates permit to have very limited pressure
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP
Control Valve GS 3 series 1/2 up to 10. material
Control Valve 8021 GS 3 series 1/2 up to 10 Pneumatic control valve with integrated positioner for the control of neutral and aggressive fluids. Ideal for steam and flashing liquids. Integral top mount
ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T. Electric actuator ARI-PREMIO 2,2-25 kn ARI-PREMIO-Plus 2G 2,2-25 kn
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
FlowPak TM General Application Valve DN , PN 10 / 40
FlowPak TM General Application Valve DN 15 -, PN / SCHERR Application Control of gases, vapours and liquids. The modular concept of valve, multi spring actuator and our standard Positioner facililates
BALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AS AD C D E F Kg AS
Series 3500 Control Valves Globe-3-Way Mixing Valves Globe-3-Way Diverting Valves
Product Specification PS100401 2010. 04 Series 3500 Control Valves Globe-3-Way Mixing Valves Globe-3-Way Diverting Valves for promotes more tightness and heavy duty control Series 3500 Control Valves Globe
ARI-STEVI 470 / ANSI (DN25-200)
With pneumatic and electric actuators Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 471 - ANSI Pneumatic actuator ARI-DP 32-35 Reversible
ARI-FABA -ANSI LongLife Stop valve with bellows seal
Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -ANSI LongLife - Class 150 Straight through with flanges German TA - Luft TÜV-Test-No. 088-945053
GVER04 GLOBE VALVE. Fundamental Of Engineering Data. Fundamental Of Engineering Data 14.04
GVER04 14.04 GLOBE VALVE Fundamental Of Engineering Data Fundamental Of Engineering Data INDEX 03 04 05 06 07 PRODUT FEATURES MODEL SELECTION GUIDE GLOBE VALVE ASSEMBLY DIMENSION KS/JIS 10K RF, ANSI CL
Series 240 Pneumatic Control Valve Type DWA, -7 DWA, -9 DWA Globe Valve Type 3241 DWA
Series 240 Pneumatic Control Valve Type 3241-1 DWA, -7 DWA, -9 DWA Globe Valve Type 3241 DWA ANSI version Application Control valve for PSA plants (Pressure Swing Adsorption) (German: DWA) NPS ½ to 6 Pressure
Cage Guided Globe Control Valves
Product 1: Pressure Balanced Cage type Control Valve Size: 1-1/2'', 2, 2-1/2'', 3'', 4'', 5'', 6'', and 8'' (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN100, JIS10K~JIS40K) OVERVIEW The model
M21Fi ISO Ball Valve DN15 to DN150
Page 1 of 6 TI-P133-81 ST Issue 1 M21Fi ISO Ball Valve DN15 to DN150 Description The M21Fi is a reduced bore ball valve, with a single piece body, having ISO mounting as standard. It is designed to be
DBOY Series Pneumatic Control Valve
Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as
Two port valves. pneumatically actuated
Two port valves pneumatically actuated One valve - The Spirax Sarco range of KE valves and PN5000 and PN6000 pneumatic actuators are designed to give a comprehensive selection of control valves for use
ARI-STEVI 440 / 441 DVGW type approval
ARI-STEVI 440 / 441 DVGW type approval Control valve in straightway form for combustible gases DIN-DVGW type approval DN 15-100 ARI-STEVI 440-G / 441-G for electric and pneumatic actuators DIN-DVGW type
M21Hi ISO Reduced Bore Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Two-Way Soft Seated Ball Valve Type 75-S
Two-Way Soft Seated Ball Valve Type 75-S Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Design Standards EN 12516, EN 1983, ISO 5211, AD-2000 ASME B16.34,
ARI-STEVI 423 / 463 (DN ) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators ARI-STEVI 423 / 463 (DN200-300) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP
Control Valve Technical Brochure
Control Valve Technical Brochure General Stem-Guided Control Valves Sizes ½" - 12" (15mm - 300mm) ANSI Class 150-0 (PN16-1) 7/14 Version 1 REflex Control Valve Pressure / PSIG Pressure / PSIG 800 700 0
Every component precisely matched
Series 8B Every component precisely matched Powerful valve actuator Most commonly used is the pneumatic multi-spring actuator series MA as shown here. It is robust, ex-proof, features low actuating times,
Control Valve fluids with integrated positioner. GS 3 series - DN 15 up to DN 250. material
Control Valve 8021 with integrated positioner GS 3 series - DN 15 up to DN 250 Pneumatic control valve for the control of neutral and aggressive fluids with integrated positioner Space saving wafer type
Angle Seated Valves. ecoflo-as. Angle Seated Valves
Angle Seated Valves ecofloas Angle Seated Valves AngleSeat Valves PNEUMATIC AND ELECTRIC VALVES PN / PN / PN / ANSI 0 / ANSI 00 series pneumatic and electric valves are designed as onoff or reglation valves
KOSO HAMMEL DAHL. Specifications. Body Size: Globe - 1/2" through 6" ( mm). Angle - 1/2" through 2" (15-50 mm).
control valves KOSO HAMMEL DAHL B U L L E T I N G 1 3 0-1 FEATURES Cage-retained quick change seat ring simplifies maintenance. Metal seats for a variety of services and ANSI IV and V shutoff. Soft seat
QLM and QLD Series DN125 to DN200 Three Port Control Valves
3.63.27.22 3900/1 IM-P39-1 CH Issue 1 QLM and QLD Series DN12 to DN200 Three Port Control Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation
Type 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate
SERIES 830T THREE WAY VALVE
SERIES 80T THREE WAY VALVE The series 80T three-way valve is designed for diverting service or mixing service applications. A diverting service valve takes common stream and splits it into two outlet ports.
BUTTERFLY VALVE 1234P SERIES
FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BUTTERFLY VALVE 1234P SERIES With pneumatic actuator
ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP 34-34T. Electric actuator ARI-PREMIO 5-25 kn ARI-PREMIO-Plus 2G 5-25 kn
Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP 34-34T Reversible pneumatic actuator
SERIES ECCENTRIC DISC CONTROL VALVES
1-2471 SERIES ECCENTRIC DISC CONTROL VALVES - 2 - 1-2471 SERIES ECCENTRIC DISC CONTROL VALVES 1-2471 series control valves feature a double eccentric disc and an easy-to-be changed PTFE or metal seal ring.
Control Valve 8021 with integrated positioner
Control Valve 8021 GS 3 series DN 15 up to DN 200 Pneumatic control valve for the control of neutral and aggressive fluids Space saving wafer type construction Lowest possible weight Quiet operation Fast
BALL VALVE - 10 SERIES Electric actuator - El-O-Matic
DN B C D BALL VALVE - 10 SERIES Electric actuator - El-O-Matic E L DIMENSIONS: (mm) DN Ø L B C EL D E Kg 10 3/8" 36 33 73 55 298 95 7,8 15 1/2" 36 33 73 55 298 95 7,8 20 3/4" 39 36 76 55 301 95 8,3 25