NOUVEAULINE EC NOUVEAULINE EC NOUVEAULINE EC NOUVEAULINE EC DESIGN AIR CURTAIN INDIVIDUAL INNOVATIVE ENERGY-SAVING

Transcription

1 NOUVEAULINE EC NOUVEAULINE EC NOUVEAULINE EC NOUVEAULINE EC DESIGN AIR CURTAIN INDIVIDUAL INNOVATIVE ENERGY-SAVING

2 NOUVEAULINE EC DESIGN AIR CURTAIN Steel-composite design high-quality powder coated Inspection panel hinged on one side, opens downwards in combination with the intake grille Patented Jetflow nozzle for optimised shielding performance Applications Nouveauline EC is the attractively-designed model for the sophisticated entry area. It is used in shops and retail, banks and architecturally significant façade areas. Nouveauline EC fulfils the requirements of these wherever energy-efficient solutions meet high-quality design. Installation-ready, -hanging unit. Special design To save energy, the Nouveauline EC has been equipped with the new, optimised Jetflow discharge nozzle. This patented discharge nozzle is characterised by the multi-adjustable discharge angle and its adaptive, asymmetrical nozzle cross-section. Thanks to the specially selected asymmetrical adjustment of the Jetflow air guide profiles, not only is the level of noise reduced, but a larger throw distance is achieved, thus optimising the shielding performance. The housing Self-supporting steel-composite construction used for the air blower housing. Screws are not visible. High-quality powder coating, RAL 9006 as standard (white aluminium). Other colours are available. Inspection panel opens downwards in combination with the intake grille. Attractive intake grille D stainless steel finely perforated plate with micro grille behind it for filterless, easy maintenance application. Acoustically and thermally insulating lining. Heating media Heat exchangers for different heating media LPHW: for normal temperature LPHW 70/50 C and low-temperature LPHW 60/40 C, other temperatures available on request. DX: DX register soldered under nitrogen for operation with heat pumps (only heating modus possible). High-quality heat exchanger made from copper tubes, with pressed-on, extra-strong aluminium fins. ELECTRO: -stage heat exchanger 400V, spiral form, corrosion resistant, with thermal overheating protection and switch-off delay.

3 Attractive intake grille with micro-intake grille behind it Advantages at a glance Made in Germany ErP 015 ready / EC fans Certified by TÜV-Süd Self-supporting steel-composite construction Individual colours available (standard RAL 9006) Patented energy-saving Jetflow nozzle Individual unit lengths up to 500 mm Service-friendly thanks to filterless micro-intake grille Simple to install Higher throw distances thanks to optimised technology Different heating media possible EC fans The efficiency of the EC fans used by TEKADOOR is > 90% under partial load operation. This is 0 5% higher than for conventional AC fans. This does not just increase the efficiency, but also reduces the operating costs. The individually-driven EC fans with integrated motor protection can intake air in both directions. They have vibration- bearings and are controlled with 0-10 V. They do not just comply with Directive ErP015, but actually exceed this standard. We recommend our suspended cladding to cover the supply lines. Mounting Simple mounting thanks to the rivet nuts (M) incorporated on the upper side of the unit and ly-available assembly materials. In the standard version, the unit does not need to be opened for electrical connection. Connection terminals for the voltage supply, as well as the connectors for the control unit and parallel operation can be accessed from the outside. Maintenance Easy to clean (micro grille) without opening the unit by simply vacuuming the intake grille. Secured inspection panel (hinges on one side) easy to open for maintenance work, in combination with the intake grille. Control Electronic TEKADOOR GTM EC control unit, multifunctional, among others with ModBus interface A GTM EC control unit is used as standard for units with LPHW heating. For units with electrical heating, a GTM 1 E EC control unit is used. Both come with 0 m preassembled and shielded data cable. The GTM EC 5-stage control unit includes the ability to switch from manual to automatic and from summer mode to winter mode as standard. A solenoid valve of up to.5 A can be connected as an option for the winter mode. With the standard GTM 1 E EC control unit, the airflow can be selected manually in 5 stages and the heating capacity depending on the fan level can be selected manually in stages. Both control units have a potential- contact for enabling via any on-site BMS or BEMS. A maximum of 10 units can be connected in parallel.

4 NOUVEAULINE EC DETAILS Connections Heating connections flow and return on top of the unit as standard for easy connection to the on-site heating system. (Internal thread dimensions depend on the model) Connection box (LPHW) Simple electrical connection via connection box (voltage supply 0 V/50 Hz on the top of the unit). Exception: Electrical units with a heating capacity greater than.5 kw. 4

5 Data cable connection/interface Simple, standard plug and play connection of the data cable and an solenoid valve on the top of the unit. The connection can be offset on request. Control: Input for the data cable to the control unit. Jetflow discharge nozzle Jetflow discharge nozzle with adaptive, asymmetrical nozzle cross-section. The special design of this patented discharge nozzle permits stepless variation of the discharge angle combined with a longer guided, smooth air stream with optimum throw distance. Auxiliary: Output for parallel operation with other units. 5

6 NOUVEAULINE EC FREE-HANGING INSTALLATION NOUVEAU 6

7 IN OUT TOP VIEW Seitenansicht/Schnitt SIDE VIEW/SECTION IN OUT Ansaugseite A Ansaugseite Seitenansicht/Schnitt Ansaugseite 7 Jetflowdüse FRONT VIEW 55 A A = variable Länge Jetflowdüse technische Änderungen vorbehalten BOTTOM VIEW gezeichnet geändert Name ma Datum Werkstoff Maßs 10 Albert-Einstein-Str. 11 D Langenfeld Tel.: 049 (0) Fax: 049 (0) A = variable Länge Kundenzeichnung Nr.: Benennung Kunde Pos. von Gruppe Erstelldatum Nouveauline Jetflow 106 Teile Blatt 1 von technische Änderung gezeichnet Name ma Datum geändert Werkstoff Pos. von Grupp Kundenzeichnung Nr.: Erstelldatum A = VARIABLE UNIT LENGTH Benennung Albert-Einstein-Str. 11 Nouveauline Jetflow 10 D Langenfeld * WE RESERVE THE RIGHT TO MAKE Kunde TECHNICAL CHANGES Tel.: 049 (0) Fax: 049 (0) Connection-ready -hanging door air curtain unit for visible installation directly above the door. Ambient air intake is at the front, on the room side. LINE EC7

8 NOUVEAULINE EC STANDARD CIRCUIT DIAGRAM FOR LPHW Hand Fr ModBus interface () Stufe MODE 1 4 ext. Contact Raumthermostat 1 MOD Bus Adresse to input CONTROL next PCB Standard supplied shielded datacable (0 m) 1:1 straight wired RJ 45 connentors! Magnetic valve (OPTIONAL) L N PE 1 M next Fan MOD Bus RJ 45 ON 1 AUX AUXILIAR MON CONTROL PCB EC L N PE 0V / 50Hz L N PE intern 4 weiss/white gelb/yellow blau/blue rot/red L1 N PE imp. Y 0-10 V 0 V 10 V zum Steuerteil (CONTROL) Adresse 1-9 Standard Anschlusskabel (0 m) mit RJ-45 Stecker Magnetventil (OPTIONAL) CPU AUXILIAR CONTROL Adress switch 0 = MASTER 1-9 = SLAVE F 16 AT AUX MON BMS On/Off Frost protection thermostat ext. Contact Room Termostat Failure Operation L N PE Connecting box Mains switch and fuses to be installed by third parties must comply to all applicable ruls and 0V/ 50Hz requirements! CPU Adress Schalter 0 = MASTER 1-9 = SLAVE Plati * WE RESERVE THE RIGHT TO MAKE TECHNICAL CHANGES GTM EC control unit with ModBus interface languages can be selected (German/English), menu-prompted electronic control for air curtains with energy-saving EC fans and LPHW heating. Operation/navigation is performed with a central rotary multiselector. Menu operation via.4" colour display with text and icon display for different operating states. Standard display of the date and time. Multiple operating modes possible: 1.) Manual.) AutoTK = Automatic operation with door contact control (adjustable switch-off delay time sec).) AutoTK = Automatic operation with door contact control and room thermostat 4.) AutoTA = Automatic operation with cool down protection and door contact control Functions: Manual-automatic modes, 5 stage, summer/winter modes, adjustable switch-off delay time, frost protection. Inputs: Room thermostat (cool down protection), door contact (external signal encoder), frost protection thermostat, enable contact via external BMS or BEMS. Outputs: potential- operation and malfunction signal Notifications are displayed with an orange background and faults with a red background! Thanks to different coding of the control boards (Master/Slave) up to 10 door air curtains Name can be connected Datum in parallel gezeichnet/signet la with 1 control unit. Load and control boards preinstalled in the door air curtain unit and 0 m of preassembled data cable (connection between the door air curtain and control unit) are included as standard. DDC- Freigabe nicht belegt Frostschutzthermostat ext. Signalgeber nicht belegt nicht belegt Werkstoff nicht belegt

9 NOUVEAULINE EC CIRCUIT DIAGRAM FOR ELECTRICAL HEAT EXCHANGER Hand Fr Stufe 4 1 Room thermostat ModBus interface () MODE K1 K K 1 MOD Bus Adresse to input CONTROL next PCB AUX AUXILIAR Standard supplied shielded datacable (0 m) 1:1 straight wired RJ-45 Stecker q S 0 MON CPU CONTROL K1 q S 60 K1 q S 45 Adress switch 0 = MASTER 1-9 = SLAVE q S 50 PCB EC L N PE 0V / 50Hz L N PE intern q S M weiss/white gelb/yellow blau/blue rot/red F 16 AT next FAn L1 N PE Y 0-10 V 0 V 10 V imp. zum Steuerteil (CONTROL) Adresse 1-9 AUX AUXILIAR MOD Bus RJ 45 MON CONTROL ON 1 Standard Anschlusskabel (0 m) mit RJ-45 Stecker Magnetventil (OPTIONAL) BMS On/Off Room thermostat Failure Operation K0 1 L N PE Connecting box Plati K K step step 1 step = step 1 step 4 ~400V/ 50Hz 0V/ 50Hz Mains switch and fuses to be installed by third parties must comply to all applicable rules and requirements! CPU Adress Schalter 0 = MASTER 1-9 = SLAVE * WE RESERVE THE RIGHT TO MAKE TECHNICAL CHANGES GTM 1 E EC control unit with ModBus interface languages can be selected (German/English), menu-prompted electronic standard control for air curtains with energy-saving EC motors and electrical heating. Operation/navigation is performed with a central rotary multi-selector. Menu operation via.4" colour display with text and icon display for different operating states. Functions: Manual switching of 5 fan levels and heating levels. Inputs: Enable contact via on-site BMS or BEMS, room thermostat, (On/Off: only for electrical heating). Outputs: potential- operation and malfunction signal. Notifications are displayed with an orange background and faults with a red background! Thanks to different coding of the control boards (Master/Slave) up to 10 door air curtains can be connected in parallel with 1 control unit. Load and control boards preinstalled in the door air curtain unit and 0 m of preassembled data cable (connection between the door air curtain and control unit) are included as standard. DDC- Freigabe nicht belegt Frostschutzthermostat ext. Signalgeber nicht belegt nicht belegt nicht belegt gezeichnet/signet Name la Datum Werkstoff

10 NOUVEAULINE EC OPTIONAL ACCESSORIES Thermostatic straightway valve (Setting range 5 C to 45 C) limits the discharge temperature (constant supply air temperature limitation). Also available as a -way valve. Ceiling attachment set For problem-, vibration- ceiling attachment, consisting of M threaded rods, up to 1000 mm length, vibration dampers, turn-buckles and counter nuts. Door contact solenoid switch In automatic mode switches on the door air curtain in the preselected stage in conjunction with GTM EC, GTM EC and GTM E EC. 10

11 Frost protection thermostat Solenoid valve Room thermostat Thermo-electric shut-off valve For monitoring LPHW heat exchangers exposed to the risk of frost. As soon as the temperature falls below 7 C, the fans are switched off and an solenoid valve is opened. Opens or closes the heating water circuit in the summer/ winter setting of the control unit, to close the heating water circuit during summer operation or when the air curtain is not working (normally closed). Prevents overheating or overcooling of the room/ vestibule in automatic operation. 0 V / 50 Hz, normally closed. On-site installation in the heating flow. Actuation via the summer/ winter circuit. Summer function closed. Winter function open. Caution: If solenoid valves or thermoelectric shut-off valves are used, it is expressly recommended to install a frost protection thermostat (automatically actuated) and a strainer. 11

12 NOUVEAULINE M EC TECHNICAL DATA FREE-HANGING Design based on: recommended operating point intake temperature tle = 0 C discharge temperature tla = 4 C discharge height = up to.70 m MODEL M 1 M 1.5 M M.5 Air quantity max. m /h Heating capacity rated 1 LPHW 70 / 50 C kw LPHW 60 / 40 C kw Flow rate LPHW 70 / 50 C m /h LPHW 60 / 40 C m /h Water resistance LPHW 70 / 50 C kpa LPHW 60 / 40 C kpa Nominal connection sizes Internal thread Inches x /4" x /4" x /4" x /4" Flow/return DN EC fans Voltage V 0 / 1 / N / PE Frequency Hz 50 Current consumption A Motor power kw Electric heater -stage Voltage V 400 / / N / PE Frequency Hz 50 Heating capacity kw /6/9 4//1 6/1/1 6/1/1 Sound pressure level Highest setting db (A) Drawing dimension Unit width ( A ) mm Unit height mm Unit depth mm Weight kg * WE RESERVE THE RIGHT TO MAKE TECHNICAL CHANGES 1. Rated operation based on operating point (see above), discharge temperature control recommended.. Measured at a lateral distance of m. Sound pressure level may very depending on surrounding conditions.. Control voltage 0-10 V. A well-balanced pressure ratio is one of the prerequisites for perfect function. 1

13 NOUVEAULINE L EC TECHNICAL DATA FREE-HANGING Design based on: recommended operating point intake temperature tle = 0 C discharge temperature tla = 4 C discharge height = up to.00 m MODEL L 1 L 1.5 L L.5 Air quantity max. m /h Heating capacity rated 1 LPHW 70 / 50 C kw LPHW 60 / 40 C kw Flow rate LPHW 70 / 50 C m /h LPHW 60 / 40 C m /h Water resistance LPHW 70 / 50 C kpa LPHW 60 / 40 C kpa Nominal connection sizes Internal thread Inches x /4" x /4" x /4" x /4" Flow/return DN EC fans Voltage V 0 / 1 / N / PE Frequency Hz 50 Current consumption A Motor power kw Electric heater -stage Voltage V 400 / / N / PE Frequency Hz 50 Heating capacity kw 5/10/15 7.5/15/.5 10/0/0 10.7/1.4/ Sound pressure level Highest setting db (A) Drawing dimension Unit width ( A ) mm Unit height mm Unit depth mm Weight kg * WE RESERVE THE RIGHT TO MAKE TECHNICAL CHANGES 1. Rated operation based on operating point (see above), discharge temperature control recommended.. Measured at a lateral distance of m. Sound pressure level may very depending on surrounding conditions.. Control voltage 0-10 V. A well-balanced pressure ratio is one of the prerequisites for perfect function. 1

14 NOUVEAULINE DX-H M EC TECHNICAL DATA FREE-HANGING ONLY HEATING MODE POSSIBLE Design based on: recommended operating point intake temperature tle = 0 C discharge temperature tla = 4 C discharge height = up to.70 m heating gas temperature = 70 C condensation temperature = 50 C condensate exit temp. = 45 C operating pressure = max. 45 bar MODEL DX-H M 1 DX-H M 1.5 DX-H M DX-H M.5 Air quantity max. m /h Power rated 1 DX heating capacity kw Delivery and intake line Connections mm 10/16 10/16 10/1 10/ EC fans Voltage V 0 / 1 / N / PE Frequency Hz 50 Max. current consumption A Max. motor power kw Sound pressure level Highest setting db (A) Drawing dimension Unit width ( A ) mm Unit height mm Unit depth mm Weight kg * WE RESERVE THE RIGHT TO MAKE TECHNICAL CHANGES 1. Rated operation based on operating point (see above).. Measured at a lateral distance of m. Sound pressure level may very depending on surrounding conditions.. Control voltage 0-10 V A well-balanced pressure ratio is one of the prerequisites for perfect function. 14

15 NOUVEAULINE DX-H L EC TECHNICAL DATA FREE-HANGING ONLY HEATING MODE POSSIBLE Design based on: recommended operating point intake temperature tle = 0 C discharge temperature tla = 4 C discharge height = up to.00 m heating gas temperature = 70 C condensation temperature = 50 C condensate exit temp. = 45 C operating pressure = max. 45 bar MODEL DX-H L 1 DX-H L 1.5 DX-H L DX-H L.5 Air quantity max. m /h Power rated 1 DX heating capacity kw Delivery and intake line Connections mm 10/16 10/1 10/ 10/ EC fans Voltage V 0 / 1 / N / PE Frequency Hz 50 Max. current consumption A Max. motor power kw Sound pressure level Highest setting db (A) Drawing dimension Unit width ( A ) mm Unit height mm Unit depth mm Weight kg * WE RESERVE THE RIGHT TO MAKE TECHNICAL CHANGES 1. Rated operation based on operating point (see above).. Measured at a lateral distance of m. Sound pressure level may very depending on surrounding conditions.. Control voltage 0-10 V A well-balanced pressure ratio is one of the prerequisites for perfect function. 15

16 German headquarters TEKADOOR GmbH Albert-Einstein-Str. 11 D Langenfeld T. 49 (0) F. 49 (0) E. A =