TYPE 1 (Flush fits gauge material) Fits Hole. Size A B C D E F 3/8 3/8 3/4 3/4 1/2 7/8 5/8 5/8 1-1/16 13/16 11/16 1-1/16 3/4 7/ /32

Transcription

1 Snap-In Plugs TYPE (Flush fits -6 gauge material) Flush Front NI 659* NI 659- NI NI 0 NI 0-S Fits Hole Size C D E F /8 /8 / 5/8 5/8 - / NI 7 NI NI 8 NI NI 65 -/ - -5/ -7/6-5/ NI 57 NI NI 5 NI 6 NI 7 -/6 - -/ - -9/6-5/8 - -/8-7/ Type : Flush front. Type : Recessed front. Snap-In Plugs are tough, flexible finishing plugs used extensively in all sheet metal work to seal access holes. Insertion is a snap. Thanks to an internal bead, they hold on tight when the handling gets tough. Snap-In Plugs are used by auto rustproofers, on refrigeration units, water heaters, steel doors, paint cans, lawn mowers even piggy banks! These can be hot stamped with your logo to provide a unique and attractive solution for product identification. Call us for a quote on hot stamping. NI 9 NI 7 NI NI 5* NI 5-S* TYPE (Recessed) NI - NI - NI 8- NI - NI 65- NI - NI 5- NI 8- NI 6- NI 7- NI 9- NI - -/ -5/8 Fits Hole Size C D E F / -/ - -/ -5/8 - -/ -/8 -/8 -/ -/ -5/ - -/8-7/6-5/8 - -/8 -/8 -/ Minimums available on request lack Low Density Polyethylene. Tolerances on all decimal dimensions are ±.00 per inch (example: ±.00 per inch =.05). Tolerances for fractional dimensions are ± /" per inch. Heat distortion temperatures are as follows: Low Density Polyethylene: 00- F (66 P.S.I.) Medium Density Polyethylene: 0-65 F (66 P.S.I.) High Density Polyethylene: 0-80 F (66 P.S.I.) 0

2 Knock-Out Seals These nylon electrical knock-out seals are moulded in gray colour to resemble galvanized steel and lock firmly in boxes up to ". They install quickly with fingertip pressure (no tools required). Trade Size Hole Max. KOS/ KOS KOS KOS- KOS-/ KOS / - -/ Standard colour: Gray. Paper Tube Plugs The " to 6" polyethylene paper tube plugs come with convenient fingerpull tabs (one or two, depending on size), and are /" deep. The 8" to " plugs have a wide flange for easy removal from tubes and are -" deep. Fits Tube ID Fits Tube ID TP 000 TP 50 TP 75 TP - -/8 -/ TP 750 TP 000 TP TP / TP 750 TP 000 TP 50 TP - - -/ TP 0 TP 6000 TP 8000 TP 0000 TP Standard colour: Natural white (" to 6") or black HDPE (8" to "). Other colours available for " to 6" sizes (minimum order 0,000).

3 Shorty Plugs Use when space inside the panel is a problem. Shorty plugs have a limited (/8") protrusion inside the panel. They have a matte finish head tapering to a thin edge for a smooth finished look. Quickly and easily installed. SP8 SP8 SP SP SP75 SP06 SP7 SP68 SP SP5 SP59 SP65 SP750 SP78 SP875 SP000* Hole / / / /8 5/ 5/ 7/ 7/ 9/ / 7/ 5 / -/6 Minimum order 000. Standard colour: lack. Other colours available at premium charge if quantities are sufficient. *UL and CS approvals pending. LSO VILLE: PRY OUT PLUGS INSULTION PLUGS

4 Dome Plugs Close unneeded chassis holes. Moulded of black nylon, these feature a convex, matte finish head that tapers to a thin edge. Gives your product an uninterrupted, completed surface you can even paint over. No tools required. Just a quick push locks these firmly into chassis up to " thick. Hole Minimum Order Qty. DP87 DP50 DP DP75 DP /6 /8 5/ 7/ 5/6 5/6 5/6 DP DP56 DP65 DP687 DP / / 5/ 59/6 DP8 DP875 DP000 DP09 DP * /6 -/6-7/ -5/6 DP50 DP75 DP DP750 DP /6 -/8 -/ -/6-9/ -9/6 5/ DP.09 DP.5 DP.5 DP.0 DP.75.09** / -/6 -/ DP.5 DP.0 DP5.0 DP / -5/ 5-7/ 6-7/ 5/ 5/ Standard colour: lack. Other colours available at premium charge if quantities are sufficient. * can be used up to diameter. ** can be used up to diameter

5 DOULE D Dome Plugs CONTINUED Got a strain relief hole where it shouldn t be? Don t start again; just fill it with a double D plug. These work for other chorded or DD holes as well (holes punched or moulded with two opposing flats). The convex, matte finish head tapers to a thin edge, giving your chassis a completed look. ll sizes have a head thickness of ", and fit a maximum chassis thickness of ". Hole D To Prevent Rotation DD7-90 DD-5 DD56-50 DD DD DD / / / 59/6 -/6 Minimum order 000. THICKER PNEL DOME Closes unneeded panel holes and electrical knock-outs. ll-nylon construction. Convex matte finish head tapers to a thin edge. (pproximate head thickness.06".) Locking fingers snap into holes with fingertip pressure for quick and easy installation. Withstands a push-back force of 5 pounds. Hole DPT DPT65 DPT750 DPT875 DPT DPT09 DPT87 DPT50 DPT75 DPT DPT750 DPT Standard Colour: lack or White.

6 Vent Plugs Permits the passage of air for heat dissipation and ventilation. Convex, matte finish head tapers to a thin edge. Locks firmly into chassis up to " thick. Quick and easy installation with only fingertip pressure. VP VP65 VP750 VP875 VP000 Hole No. of Holes VP09 VP87 VP50 SVP50 VP VP VP750 VP000 VP.5 VP.0 VP.5 VP Standard colour: lack. White and other colours available at premium charge if quantities are sufficient. PLUG SSORTMENT LKIT Our labkits are perfect for product design departments, experimental labs and for all prototype work. LKIT is an assortment of plugs with approximately the following quantities and part numbers. (Content may vary.) 5 each DP50, DP, POP75, POP50, G7, G, GPT 5 each GPT65, DPT65 0 each DPT750, SP750, WP750 8 each SP875 5 each WP000 each VP000, VPT000, DP50 each DP 5