Type 1 (Flush - fits gauge material) Fits Hole Size A B C D E F 3/8 3/8 1/2 5/8 5/8 3/4 3/4 7/8 1-1/16 13/16 11/16 3/4 7/ /32
|
|
- Giles Goodman
- 5 years ago
- Views:
Transcription
1 SNAP-IN PLUGS Flush Front Type (Flush - fits -6 gauge material) NIA 659* NIA 659- NIA NIA 0 NIA 0-S NIA 7 NIA NIA 8 NIA NIA 65 Fits Hole Size A B D E F /8 /8 / -/ - /6 - -5/ -7/6-5/ Std. Pkg. 0,000 8,000 0,000 7,000 NIA 57 NIA NIA 5 NIA 6 NIA 7 -/6 - -/ - -9/ /8-7/ ,,,000,, Type : Flush front. Type : Recessed front. Snap-In Plugs are tough, flexible ÒfinishingÓ plugs used extensively in all sheet metal work to seal access holes. Insertion is a snap. Thanks to an internal bead, they hold on tight when the handling gets tough. Snap-In Plugs are used by auto rustproofers, on refrigeration units, water heaters, steel doors, paint cans, lawn mowersðeven piggy banks! These can be hot stamped with your logo to provide a unique and attractive solution for product identification. all us for a quote on hot stamping. NIA 9 NIA 7 NIA NIA NIA 5* NIA 5-S* -/ - - Type (Recessed) NIA - NIA - NIA 8- NIA - NIA 65- NIA - NIA 5- NIA 8- NIA 6- NIA 7- NIA 9- NIA - -/8 -/8 -/ -/ Fits Hole Size A B D E F / -/ - -/ - - -/ -5/ - -/8-7/ /8 -/8 -/ Minimums available on request Std. Pkg. 8,000,000,,000,, Black Low Density Polyethylene Tolerances on all decimal dimensions are ±.00 per inch (example:. ±.00 per inch =.05). Tolerances for fractional dimensions are ± /Ó per inch. Heat distortion temperatures are as follows: Low Density Polyethylene: 00- F (66 P.S.I.) Medium Density Polyethylene: 0-65 F (66 P.S.I.) High Density Polyethylene: 0-80 F (66 P.S.I.) ords anada Ltd., 6 Densley Avenue, Toronto, Ont. M6M 5E Toronto alling Area: (6) -68 Outside Toronto Area: Fax: (6) -689
2 HOLE PLUGS DOME PLUGS lose unneeded chassis holes. Moulded of black nylon, these feature a convex, matte finish head that tapers to a thin edge. Gives your product an uninterrupted, completed surface you can even paint over. No tools required. Just a quick push locks these firmly into chassis up to " thick. Heyco has hole plugs for all occasions and in virtually every size you'll ever need. Plug unwanted holes, provide ventilation, allow viewing access, seal against liquidsðthese are just some of the things you can do with our hole plugs. For further information about hole plugs and other Heyco products, ask for the most current Heyco catalogue. Mounting Hole Diameter A B Diameter Overall Height Maximum hassis Minimum Order Qty. DP87 DP50 DP DP75 DP /6 /8 5/ 7/ 5/6 5/6 5/6 DP DP56 DP65 DP687 DP / / 5/ 59/6 DP8 DP875 DP000 DP09 DP * /6 -/6-7/ -5/6 9/6 9/6 9/6 9/6 DP50 DP75 DP DP750 DP /6 -/8 -/ -/6-9/ -9/6 9/6 9/6 9/6 9/6 5/ DP.09 DP.5 DP.5 DP.0 DP.75 DP.5 DP.0.09** / -/6 -/ -/ -5/ Standard colour: Black. Other colours available at premium charge if quantities are sufficient * can be used up to diameter ** can be used up to diameter ords anada Ltd., 6 Densley Avenue, Toronto, Ont. M6M 5E Toronto alling Area: (6) -68 Outside Toronto Area: Fax: (6) -689
3 HOLE PLUGS ONTINUED SHORTY PLUGS MAXIMUM HASSIS THIKNESS Use when space inside the panel is a problem. Shorty plugs have a limited (/8Ó) protrusion inside the panel. They have a matte finish head tapering to a thin edge for a smooth finished look. Quickly and easily installed. A Mounting Hole Diameter A B Diameter Overall Height Maximum hassis SP8 SP8 SP SP SP / / /8 5/ SP06 SP7 SP68 SP SP / 7/ 7/ 9/ SP59 SP65 SP750 SP78 SP / 7/ 5 / Minimum order 000. Standard colour: Black. Other colours available at premium charge if quantities are sufficient. ords anada Ltd., 6 Densley Avenue, Toronto, Ont. M6M 5E Toronto alling Area: (6) -68 Outside Toronto Area: Fax: (6)
4 HOLE PLUGS ONTINUED VENT PLUGS Just like a dome plug, but with holes that permit air ventilation and heat dissipation. It leaves you with an attractive cover for unsightly or roughedged chassis holes. Twenty sizes for use in /" to " diameter holes. Quick and easy installation with only fingertip pressure. ALSO AVAILABLE: PRY OUT PLUGS INSULATION PLUGS PAPER TUBE PLUGS The Ó to 6Ó polyethylene paper tube plugs come with convenient fingerpull tabs (one or two, depending on size), and are /" deep. Standard colour is natural white. Other colours available (minimum order 0,000). The 8" to " diameters only come in black high density polyethylene. They have a wide flange for easy removal from tubes, and are -" deep. Fits Tube ID Fits Tube ID TP 000 TP 50 TP 75 TP - -/8 -/ TP 750 TP 000 TP TP / TP 750 TP 000 TP 50 TP - - -/ TP 0 TP 6000 TP 8000 TP 0000 TP ords anada Ltd., 6 Densley Avenue, Toronto, Ont. M6M 5E Toronto alling Area: (6) -68 Outside Toronto Area: Fax: (6) -689
5 HOLE PLUGS ONTINUED DOUBLE D PLUGS Got a strain relief hole where it shouldn't be? Don't start again; just fill it with a double "D" plug. These work for other chorded or "DD" holes as well (holes punched or moulded with two opposing flats). The convex, matte finish head tapers to a thin edge, giving your chassis a completed look. All sizes have a head thickness of ", and fit a maximum chassis thickness of. Mounting Hole Diameter D To Prevent Rotation B Diameter Overall Height DD7-90 DD-5 DD56-50 DD DD DD / / / 59/6 -/6 9/6 Minimum order 000. ords anada Ltd., 6 Densley Avenue, Toronto, Ont. M6M 5E Toronto alling Area: (6) -68 Outside Toronto Area: Fax: (6)
6 UNIVERSAL PLUG GLIDES FLAT HEAD - gauge Tube OD Tube OD U / U U U U U X* *0- gauge. / U -/8 U - U -/ U - U -/8 - -/ - SQUARE Tube OD Tube OD UT UT UT UT X* UT - *0- gauge. - UT -/ UT UT X* UT -/ -/ -/ BALL HEAD Tube OD Tube OD UB UB UB / UB / UB - UB -/ UB - - -/ - RETANGULAR UP X UP -/ X UP X -/ Tube OD X -/ X X -/ 8 ords anada Ltd., 6 Densley Avenue, Toronto, Ont. M6M 5E Toronto alling Area: (6) -68 Outside Toronto Area: Fax: (6) -689
7 PLUG GLIDES Plug glides are made of polyethylene. Also available in ABS by special request. As with most parts we offer, we can also have glides designed to your custom specifications. Ask about our Ball Glides and Oval Glides. Round Plug Glides Size Gauge PG.65 PG PG PG.000 PG PG.50 PG.75 -/8 - -/8 6 Size Gauge PG. PG PG PG.000 PG.50 PG. -/ / Square Plug Glides Size Gauge PGS.65 PGS PGS PGS PGS.50 PGS. PGS / Rectangular Plug Glides Size Gauge PGR.X PGR.X.5 PGR X.5 PGR.000X / X / X -/ X -/ X Angled Square Plug Glides Size Gauge PGA PGA Standard olour: Black. Also available: White. Other sizes and gauges available for all styles. Other styles also available. ords anada Ltd., 6 Densley Avenue, Toronto, Ont. M6M 5E Toronto alling Area: (6) -68 Outside Toronto Area: Fax: (6)
TYPE 1 (Flush fits gauge material) Fits Hole. Size A B C D E F 3/8 3/8 3/4 3/4 1/2 7/8 5/8 5/8 1-1/16 13/16 11/16 1-1/16 3/4 7/ /32
Snap-In Plugs TYPE (Flush fits -6 gauge material) Flush Front NI 659* NI 659- NI NI 0 NI 0-S Fits Hole Size C D E F /8 /8 / 5/8 5/8 - /6.0.0.50.675.675.75.75.65.0.05.00.55.0.0.060.080 NI 7 NI NI 8 NI NI
More informationSTRAIN RELIEF BUSHINGS
STRIN RELIEF BUSHINGS Heyco invented the strain reliefñthey were the first and they're still the best. In fact, Heyco's consistent high standards and total quality commitment have entitled them to become
More informationLockit Strain Relief Bushings
STRIN RELIEF Lockit Strain Relief ushings R R Round Wire Lockit and R Flat Wire Lockit are additions to our strain relief line. Installs with fingertip pressure into an easily punched standard round or
More informationAdhesive Nylon Wire and Cable Clips
dhesive Nylon Wire and able lips acked with closed-cell, foamed polyurethane adhesive tape for excellent conformability, high temperature and solvent resistance, plus high ultimate bond strength. Mounting
More informationSECTION G STRAIN RELIEF BUSHINGS STRAIN RELIEF BUSHINGS / LIQUID TIGHT
1850 Wilson Avenue, Toronto, Ontario, Canada, M9M 1A1 Ph: 416-741-7336 Fax: 416-741-9104 SECTION G STRAIN RELIEF BUSHINGS G1 Strain Relief / Liquid Tight Strain Relief Type Straight Through Type G2-G5
More informationINSERT GLIDES w w w. w c l c o. c o m INSERT GLIDES ROUND INSERT GLIDES
PART NUMBER TUBE DIAMETER (IN.) TUBE GAUGE 100-1009 3/8 19 100-1026 7/16 16 100-1046 1/2 16 100-1048 1/2 18 100-1050 1/2 20 100-1051 1/2 21 100-1052 1/2 22 100-1069 9/16 19 100-1070 9/16 20 100-1072 9/16
More information/ CABLE TIES & WIRE FASTENERS /
Standard Self-locking Cable Ties information INFO Melting point: 265 C (509 F) Brittleness temperature: -112 C (-169 F) at 2% water Provide up to 50% more tensile strength and 15% larger bundle diameters
More informationBUSHINGS AND GROMMETS
USHINGS ND GROMMETS Snap ushings These nylon bushings convert raw-edged holes to smooth, neat, insulated ones. Special locking fingers allow the bushings to snap into holes with fingertip pressure. Mechanically
More informationWESTWOOD GARDEN TRACTORS PARTS CATALOGUE CONTENTS
WESTWOOD GARDEN TRACTORS 1984-1986 PARTS CATALOGUE CONTENTS PAGE No. S600R, S600E, S800E AND S1000 UPPER FRAME, BONNET & GRILLE, CONSOLE, ELECTRICAL, SEAT, STEERING WHEEL, ROAD WHEELS 2 3 T800 AND T1100
More informationPhone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVC-05-FLG PRESSURE RELIEF VALVE FLANGED 150#, 300#,
More informationOTHER DECK HARDWARE FITTINGS
SKI TOW RING Comes with backing plate and mounting hardware Welded and polished construction M7-35-0019007 62 (2 7/16 ) 60 (2 3/8 ) 9 (3/8 ) 52 (2 ) M7-35-0019008 89 (3 1/2 ) 79 (3 1/8 ) 12 (1/2 ) 76 (3
More informationNylon Cable Ties. Specialty Cable Ties Available at Techspan. Configuration Page# Beaded 95. Chrome Plated 96. Coloured 96. Cord Band (Ladder type) 95
all 905.820.6150 or 1.800.363.1588 Fax: 905.820.6142 Email: sales@techspan.ca Techspan cable ties are available in lengths from 4" to 48". Techspan s cable ties will satisfy bundling requirements from
More informationINSTALLATION INSTRUCTIONS: ELITE-SERIES SMALL BLOCK CHEVY CAMSHAFT BELT DRIVE KITS XTS90000 through XTS90009
BILL OF MATERIALS Part # Quantity Description Varies by kit 1 SBC billet back cover, STD cam, SBC snout, grooved rail XTC11000A 1 SBC cam pulley, STD cam, 56-tooth Varies by kit 1 Crankshaft pulley, SBC,
More informationGF Piping Systems Flange Insulation
GF Piping Systems Flange Insulation 10014347_02/17 Disclaimer Information in the catalog GF Central Plastics is as diligent as possible in compiling and updating the information in its catalog. However,
More informationPhone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model BPS05-600 FLG Back Pressure/Bypass Valve Flanged Stainless
More informationWESTWOOD GARDEN TRACTORS 1983 PARTS CATALOGUE CONTENTS
WESTWOOD GARDEN TRACTORS 1983 PARTS CATALOGUE CONTENTS PAGE No. W6R, W6E, W8E/28, W8C UPPER FRAME, BONNET & GRILLE, CONSOLE, ELECTRICAL, SEAT, STEERING WHEEL, ROAD WHEELS 2 3 W8E, W11C, W11E UPPER FRAME,
More informationSection 9 Pins, Rings, Springs & Hooks
Section 9 Pins, Rings, Springs & Hooks Contents...Page # Springs...234 Ajax Wire...235 Tube Assortments...236 Springs...237-242 Retaining Rings...243 Basic External Retaining Rings...244 Retaining Rings...245
More informationThe Wheel Doctor. Wheel Locks Lug Nuts Valves Accessories. Quality Wheel Nuts and Accessories. The Wheel Doctor. Quality Wheel Nuts and Accessories
The Wheel Doctor Wheel Locks Lug Nuts Valves Accessories TIPS FOR CORRECT WHEEL NUT IDENTIFICATION Supplying your customer with the correct wheel nuts involves more than ensuring you have the correct thread
More informationSUPPORTS, SPACERS & FASTENERS
HRWRE SUPPORTS, SPERS & FSTENERS wide range of moulded pcb supports, spacers and fastening products made from Nylon 6/6, flame retardant to UL94V-2*.The supports cover rapid fit, self-adhesive and screw
More informationPREMIUM PLASTIC PROTECTION PARTS
PREMIUM PLASTIC PROTECTION PARTS MATERIAL OPTIONS Consistently low prices EP 180 Pressure Pipe Protection Uniplugs for PVC pipes DN 50 DN 600 EP 190 Driveshaft Protection Caps with Fitting Key EP 200 Stud
More informationKEY FEATURES. Compact components for 360 µm, 1/16, and 1/32 inch ID tubing Fast, breadboard-based design Leak-free high pressure setups
CapTite Microfluidic Construction Kits KEY FEATURES Compact components for 360 µm, 1/16, and 1/32 inch ID tubing Fast, breadboard-based design Leak-free high pressure setups Routing fluids can be one of
More informationHi-Tech specially designed components allow for fast and easy assembly.
OPEN SHELVING MEDIUM, HEAVY AND EXTRA HEAVY-DUTY HI-TECH STEEL SHELVING Open Starter Units Include: Two beaded front posts, two angle back posts, one pair of back sway braces, two pair of side sway braces
More informationCable Glands & Accessories
Cable Glands & Accessories This catalog features ITC s extensive range of liquid-tight, strain relief cord connectors (cable glands) and accessories, including locknuts, sealing washers, plugs, etc. These
More informationThe H-MAC Heavy Metal Articulating Chassis Construction Guide
The H-MAC Heavy Metal Articulating Chassis Construction Guide The Heavy Metal Chassis is constructed with two identical drive modules built using 10 mechanical sub-assemblies. The drive modules are integrated
More informationXP-300 Series Sprinklers Installation & Service Instructions
XP-300 Series Sprinklers Installation & Service Instructions Introduction The XP-300 Series Sprinkler is a multiple-stream gear-driven sprinkler ideal for residential and commercial applications. Sprinkler
More informationRetrofit Kit and Replacement Component Guide
Retrofit Kit and Replacement Component Guide Aeris Retrofit Kit Part Numbers Aeris kits are designed to work with a broad range of trailers and wheel configurations and the 7-digit Stemco part numbers
More informationCARGO. Quality-Driven
Quality-Driven CARGO 5 CARGO Whatever the job. Wherever you go. Whenever duty calls. A Road Force cargo trailer has the muscle to move! Designed and built by Wells Cargo, the company that pioneered the
More informationScope of delivery: Lid and base, fixing screws, RO versions with aluminium front panel, 4 rubber feet.
Futura / Portas These flat control or keypad enclosures were designed especially for EDP workplaces and according to ergonomic guidelines. In these product series you will find enclosures with a ball-of-the-thumb
More informationRepair Parts Sheet Turbo II Air Hydraulic Pump Model 10500, 10502, (AHP-15T, AHP-25TP, AHP-35T))
Repair Parts Sheet Turbo II Air Hydraulic Pump Model 10500, 10502, 10504 (AHP-15T, AHP-25TP, AHP-35T)) Rev. 0506 Install all kit components to insure optimum performance of the repaired unit. NOTE: Storing
More informationPOLYMED CATALOGUE 2013 POLYCARBONATE STOPCOCKS MANIFOLDS - CONNECTORS
CATALOGUE 2013 POLYCARBONATE STOPCOCKS MANIFOLDS - CONNECTORS General Information COMPLIANCE PRODUCT The Luer taper fittings are conform to standard ISO 594-1 for syringes, needles and other medical devices.
More informationREPAIR PROCEDURES MANUAL
REPAIR PROCEDURES MANUAL PVX Series Vane Pumps A Design Series Step-by-Step Guide to Troubleshooting and Repairing PVX Series Vane Pumps Introduction Thank you for choosing Continental Hydraulics PVX Vane
More informationMR SERIES. One smooth operator. *MR Trolleys can only be used with ER Hoists.
SERIES One smooth operator. How do you move five tonnes across a factory floor safely and easily? Here s how: add an MR motorized trolley to your Kito ER electric hoist and you ll increase productivity
More informationParts List Single Reduction Models, Cast Iron Units
Parts List Single Reduction Models, Cast Iron Units 60 51 51 10 24 11 11 9 24 12 19 17 27 31 8 23 7 14 20 28 26 5 1 2 6 44 60 50 23 7 6 30 27 30 4 3 30 13 29 14 22 18 27 43 48 50 8 15 16 12 25 9 51 51
More informationPARTS LIST CHARGER 2022 ABLT
PARTS LIST CHARGER 2022 ABLT ITEM PART NO. PART DESCRIPTION QTY. 101 5990731 SPRING CLIP PAD HOLDER SET - INCLUDES: 1 101A 9120205 8 X 1/2 PAN HEAD PHILLIPS SHEET METAL SCREW - PACK OF 3 3 102 9121490
More informationFluid Packaging Systems
Fluid Packaging Systems Engineered Fluid Dispensing 2 Fluid Packaging Systems Nordson EFDʼs new Optimum cartridges and syringes have been designed as a complete, integrated system that brings fluid packaging
More informationMcQuay. Seasonmaker Horizontal Fan Coil. TSC Vintage G. Last Manufactured: Replacement Parts List No Revision C 08/2016
Replacement Parts List 057117500 Revision C 08/2016 McQuay Seasonmaker Horizontal Fan Coil TSC 021-121 Vintage G Last Manufactured: 1997 To find your Daikin Applied parts distributor, call 1-800-377-2787
More information:,Rhino SD/XD G/D 24 Vdc ISO
:,Rhino SD/XDG/D Vdc ISO ()Rhino SD/XD() SD/XD Rhino SD/XDG/D Vdc ISO Rhino SD/XD, Rhino SD/Xd, (Rhino SD/XD) 006 Nordson Corporation P/N 75606A-0 Rhino SD/XDG/D Vdc ISO 0 9 5 8 7 6 P/N 75606A-0 006 Nordson
More informationEngineered Fluid Dispensing
Engineered Fluid Dispensing A NORDSON COMPANY 2 The Optimum Cartridge System The Clear Advantage in fluid packaging and dispensing. EFD s new Optimum cartridges and retainers have been designed to function
More informationI. Assembling the Air Spring
B F H G D FRONT I Assembling the Air Spring 1 Install 90 degree air swivel fitting (D) to the top of the bellow This fitting is precoated with sealant Using an open-end wrench, tighten 1 and 1 /2 turns
More informationBack Pressure Regulator
Instruction Sheet P/N 108652H Description The Nordson back pressure regulator is a spring-loaded, hand-operated fluid pressure regulator designed for use with general liquid coating materials. The regulator
More informationModularity and simplicity in action. ÂÂ Cost effective, easy to design and install
84 E5 Cam Latches Overview Modularity and simplicity in action The SOUTHCO E5 cam latch is a highly modular and easy to configure solution, suitable for a wide range of applications. By changing any of
More informationCAPS & CONNECTORS. Rubber Caps (Special Heat Resistant EPDM Rubber) Ford - GM - Chrysler NYLON CONNECTORS
Sec.1 Sec. 10 CAPS & CONNECTORS Vinyl Vacuum Caps Can be used for capping lines and hoses while testing carburetors, emission control systems, vacuum lines etc. Color coded for size identification. Fits
More informationHand Pump Accessories
Hand Pump Accessories MVA6010 Fluid Transfer Accessory Kit Model MVA6010 extends the applications of Mityvac hand vacuum/pressure pumps to include dispensing and evacuating fluids, and pressure brake bleeding.
More informationCircle Track Merchandising Display
Part No: ALL070 Circle Track Includes 49 items selected for fast and frequent sales. Fits within a 4' x 4' area. Attractive packaging designs. Picture shown represents the recommended layout. Pegboard
More informationDistributed By: M&M Control Service, Inc Product Product Code Technical Instructions Page #
Table of Contents Product Product Code Technical Instructions Page # Pneumatic Air Station Equipment 201/656/908 155-005/049/086/137P25 H-3 Pressure Gauges GA142AP 155-025P25 H-7 External Restrictors 184
More informationClipper Defined. Shelving. Clipper Hi-Performance Shelving Systems. Growth with. Penco Hi-Performance Shelves. Growth with
Defined Clipper Hi-Performance Systems At the heart of the Clipper System is the ingenious Penco Clipper Clip. It is easily installed, holds the shelf firmly in place, can be repositioned at any time,
More informationSec. 11 NYLON CONNECTORS
Sec. 11 NYLON CONNECTORS 12946 Connector 5/16" x 5/16" 1/8 1/8 12916 12919 12921 12938 Connector 3/8" x 1/4" 1/8 12924 1/4" 12934 Connector 3/8" x 3/8" 18835 (E1ZE-9E499-EA) Nylon 1/8 12926 17629 12922
More information0-800 psi Carbide Seat Fluid Pressure Regulator
Instruction Sheet P/N 0350C 0-800 psi Carbide Seat Fluid Pressure Regulator Description The Nordson 0-800 psi carbide seat fluid pressure regulator is designed for use with general liquid coatings. The
More informationPlastic Handles, T-Handles & PVC Grips. Leaflet No. A06.1
I N D U S T R I L M N U F T U R I N G S I N E 1 9 2 3 Leaflet No. 06.1 Plastic Handles, T-Handles & PV Grips I N D U S T R I L M N U F T U R I N G S I N E 1 9 2 3 Who we are Rencol s flexible manufacturing
More informationNo-Hub Couplings Drainage Drains Cleanout Plugs Cover Plates
Flexible Couplings Transitions all types of DWV plastic, copper, steel, cast iron and clay pipe. 300 series stainless steel clamps Flexibility - Sleeve is manufactured of molded natural and synthetic rubber
More information0-500 PSI Soft Seat Fluid Pressure Regulator
Instruction Sheet P/N 0953A Description The Nordson 0-500 psi soft seat fluid pressure regulator is designed for use with nonabrasive liquid coatings. The regulator body is constructed of stainless steel
More informationManual Welding Accessories
Manual Welding Accessories SHORTSTUBS TM promote higher productivity, less waste, less cost and less inventory. Designed for easy installation of electrodes and built to last with a high impact, high heat,
More informationTube Plugs.
Tube Plugs www.elliott-tool.com Tube Plugs Table of Contents Page Tube Plugs Aluminum Siphons Boilers-Firetube Boilers-Watertube Sugar Mill Vacuum Pans Surface Condensers Chillers & Heat Exchangers Feedwater
More informationParts Catalog SLICING MACHINES
Parts Catalog Model 4600P SLICING MACHINES MODELS: 4600P, 4975P & 493 05-0-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF SLICER. GLOBE FOOD EQUIPMENT
More informationIso-Flo Coupling Repair
Instruction Sheet P/N 229782C Iso-Flo Coupling Repair Introduction This instruction sheet covers the repair of the male and female couplings used in the Automatic and Manual Iso-Flo HD Voltage Block Systems,
More informationPage. Table of Contents. 2 SAE 100R5 HOSE: 151 & 151H Bulk Hose...3 Reusable Fittings...3-4
Table of Contents Page SAE 100R5 HOSE: 151 & 151H Bulk Hose...3 Reusable Fittings...3-4 G1212 NYLON AIR BRAKE: G1212 Bulk Tubing...4 G212 RUBBER AIR BRAKE HOSE: G212 & G212L Bulk Hose...5 G212 Hose Assemblies...5
More informationSoft Seat Fluid Pressure Regulator
Instruction Sheet P/N 04622F Description The Nordson soft seat fluid pressure regulator is designed for use with nonabrasive liquid coatings. The regulator body is constructed of stainless steel with a
More informationHydraulic Motors Repair Instructions
Hydraulic Motors Repair Instructions Motors for Global External Hydraulic Vibrators Models 2HC - pn #251020 5HC - pn #251050 Global Manufacturing, Inc. 101 E 22nd St Little Rock, Arkansas 2206 V I B R
More informationTS1251 PRESSURE DISPENSER USER'S MANUAL
TS1251 PRESSURE DISPENSER USER'S MANUAL TABLE OF CONTENTS SECTION DESCRIPTION PAGE NUMBER 1.0 CAUTIONS AND WARNINGS... 3 2.0 INTRODUCTION... 4 3.0 DESCRIPTION... 4 & 5 4.0 SET UP AND INSTALLATION... 6
More informationInserts for square and rectangular tubes
Inserts for square and rectangular tubes 35 Outer tube dimensions Ribbed inserts/plugs with smooth sliding surface for square and rectangular tubes. The tube inserts are suitable for tubes with a wall
More informationTough Country Accessories
Tough Country Accessories Tough Country Accessories are listed in alphabetical order. Not every accessory is available for every product. Please refer back to the product page of your item of interest
More informationF479 HVE V PARTS LIST
F479 HVE 3000 115V PARTS LIST PARTS LIST 03-00105 18 SCREW 1/4 20 X.375 HWH NYLOC ZP 03-00179 1 GROMMET -.75 ID X 1.375 OD RUBBER 03-00208 4 RIVET 1/4 X 1/4 STL/STL ZP 8-4 03-00209 11 SCREW 1/4 20 X.50
More informationAutopsy Cart with Stainless Steel Top - DA100. Autopsy Cart with Fiberglass Top - DA600. Autopsy Cart with Blue Plastic X-Ray Top - DA800
Autopsy Carts Autopsy Cart with Stainless Steel Top - DA100 Dimensions: 80.5" Long x 3" Wide x 35"-36" High. Top (GA100): Heavy duty stainless steel cart top (with drain hole) and trough Casters: Heavy
More informationPORTABLE EXTRACTOR 500/500H ( ) 115V 230V
PORTABLE EXTRACTOR 500/500H (78-003 78-004) 115V 230V 500/500H TOP VIEW 03-00030 4 RIVET 3/16 X 1/2 AL/AL BLK AND 03-00204 1 RIVET - 3/16 X 5/8 TRI FOLD AL/AL 03-01547 1 WASHER FLAT.203 ID X.734 OD X.06
More informationPREMIUM QUALITY VINYL WINDOWS & DOORS
70 SERIES 50 SERIES WINDOWS & DOORS PREMIUM QUALITY VINYL WINDOWS & DOORS 1 americancraftsmanwindows.com americancraftsmanwindows.com Quality Windows & Patio Doors for Your Home Whether you re living on
More informationGenuine tines & shares
Genuine tines & shares Page Vibro Master 3 Germinator 4 Vibro Crop 4 Vibro Flex 5 Vibro Till 6 Delta 7 Delta Flex 7 Vibro Master 101 000 669 Vibro-S 32x10mm w. reversible point 101 000 740 Vibro Super-Q
More informationNatural Attraction. Our flexible cases. Blow moulding Injection moulding Cases for industry.
Natural Attraction Our flexible cases Blow moulding Injection moulding Cases for industry www.hofbauer.co.uk Schaumeinlagen und Farben Foam inserts Foam inserts and colours Customized foam inserts in medium
More informationStep 4 Press the sleeve gear assembly through the center of the bearing plate assembly so that the gear and bearing are in contact.
Rotational Center (ip-3009_page) : DATE: 0//207 QTY Parts Needed On This Page Tools Needed On This Page AM-303 40T Steer Gear, plated Arbor Press AM-0253 /2" ID, /2" Long Bushing 5/32 Allen Wrench AM-002
More informationIn Stock and Ready to Ship
www.lacerta.com In Stock and Ready to Ship Containers In All Shapes and Sizes Designed for automated production manufacturing 100% recyclable Crack & crush resistant Crystal clear clarity Custom colors
More informationMicroRaves. Anchor Packaging. Packaging That Performs. Innovative Solutions Worldwide
MicroRaves Packaging That Performs Anchor Packaging Innovative Solutions Worldwide High Performance Polypropylene Bases & Lids Incredi-Bowl Bases and Lids Round polypropylene bowls in 15 sizes from 5 ounces
More informationIP65/IP66 ABS/Polycarbonate Screw Lid Boxes
IP65/IP66 ABS/Polycarbonate Screw Lid Boxes p Versatile, lightweight & durable p Choice of materials: polycarbonate for rugged applications or ABS as an economic alternative p IP protection for outdoor
More informationTransportation Valves
Transportation Valves A Name You ve Trusted for Years... 780 Series Butterfly Valves Features: Available in sizes 3 thru 6 One handle fits sizes 3 thru 6 Integrated 180º notch plate eliminates mounting
More informationSERVICE INSTRUCTIONS. Material Pump
TM TM SERVICE INSTRUCTIONS Material Pump 9618 DESCRIPTION Model 9618 is designed for pumping petroleum products from the original container to a desired location. Due to its non-corrosive (aluminum and
More informationHP10207 KIT. Ram WD*
HP10207 KIT Ram 1500 4WD* (For 2WD call customer service 800.663.0096 for assistance) * See application guide for proper fitment. Use the most advanced air springs on the market to eliminate your vehicle
More informationBrake & Clutch Bleeding Equipment
MV8020 MV6830 18 Mityvac offers several great options to meet your unique hydraulic brake and clutch bleeding requirements. Our hand pump, manual pressure bleeder and selection of manual and compressed
More informationControl Knobs. Collet Knobs, Push-on Knobs, Slider Knobs, Pushbuttons and Accessories
Control Knobs Collet Knobs, Pushon Knobs, Slider Knobs, Pushbuttons and Accessories ua Turn quality to C O L L E T K N O S P U S H O N K N O S S L I D E R Contents Collet Knobs Page 4 5 Installation/turning
More informationShort-throw Shifter Installation Guide
Short-throw Shifter Installation Guide Removal Procedure 1) Remove the shift control knob. A. Lift up on the rear portion of the shift control closeout boot retaining ring and detach the retaining ring
More informationPARTS LIST PONY 20 SCA
PARTS LIST PONY 20 SCA WIRING DIAGRAM PART NO. PART DESCRIPTION 4990601 GEARMOTOR - 120 VOLT 4990581 GEARMOTOR - 240 VOLT 4890391 VAC MOTOR - 115 VOLT 4891251 VAC MOTOR - 240 VOLT 4991321 BRUSH MOTOR -
More informationSECTION 4 - FUEL SYSTEMS AND CARBURETION
SECTION - FUEL SYSTEMS AND CARBURETION FUEL SYSTEMS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -62 FUEL PUMP - - - - - - -
More informationEngineering Data. Assembly Length. How to Determine Correct Assembly Length
Assembly Length How to Determine Correct Assembly Length For most assemblies, the correct assembly length may be determined by direct measurement of the equipment or a drawing. Minimum bend radii as shown
More informationPhone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVC-05i-Npt Stainless Steel Inline High Pressure Relief
More information18 - Engine Control Cables
18 - Engine Control Cables Engine Control Cables Measuring Controls Cables For a new installation, measure & B distance from the control box along an unobstructed route to throttle or clutch connection
More informationcatalogue 9/2012 v.4 Plastic Packaging
catalogue 9/2012 v.4 Plastic Packaging Because quality products deserve quality packaging. As your packaging partner, Deca prides itself on its quality, consistency and customer satisfaction. We care as
More informationHow to Identify Fluid Ports and Connectors
How to Identify Fluid Ports and Connectors Accurate identification of ports and connectors in fluid piping systems is necessary before the correct hose or tube assembly can be selected and installed. With
More information** DO NOT EXCEED THE RECOMMENDED VEHICLE TOWING WEIGHT RATING ** DODGE RAM 1500
10/3/2017 DODGE RAM 1500 WARNING!! BRAKE, FUEL, AND ELECTRICAL LINES MAY NEED TO BE LOOSENED OR REPOSITIONED TO PROVIDE CLEARANCE FOR NEW HARDWARE. ON SHORT BED MODELS, CHECK FOR ADEQUATE TURNING CLEARANCE
More informationMODELS EAH / EC/E TALL/3-Door Parts Manual Revision 1.04B
MODELS EAH / EC/E TALL/3-Door Parts Manual Revision 1.04B C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T S T R E E T GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com
More informationHOW BENDS ARE MEASURED EXAMPLES BEND INFORMATION. The degree of a bend may be measured with either a protractor or an angle finder.
HOW BENDS ARE MEASURED EXAMPLES The degree of a bend may be measured with either a protractor or an angle finder. 90 OBTUSE ANGLE 45 135 DEGREE OF BEND 45 A B 0 BEND INFORMATION 180 The bend radius is
More informationFord Service Saddles and Tapping Sleeves
Section AA 04/2013; web revision 02/2014 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171
More informationEvolution Dehumidifier (Model: F292-A, F292-A BUR, F292-A GRN, F292-A PR, F292-A SM, F292-A SP, F292-A YEL ) Part Description Part # Uom Qty
Evolution Dehumidifier (Model: F292-A, F292-A BUR, F292-A GRN, F292-A PR, F292-A SM, F292-A SP, F292-A YEL ) Part Description Part # Uom Qty TERMINAL BLOCK - GP 6 X 6 X 8 X 4 QC 02-00157 Each 1 STRAIN
More informationHelaGuard. Non-Metallic Conduit & Fittings
HelaGuard Non-Metallic Conduit & Fittings HelaGuard Non-Metallic Conduit Systems Page HelaGuard Overview 3 Conduit Application Overview 4 Mounting & Removing HelaGuard Non-Metallic Fittings 5 HelaGuard
More informationNP231 SHORT SHAFT "FIXED YOKE" KIT FOR NON-CV YOKES AND FLANGE YOKES
KIT CONSISTS OF: No. Qty Part No. Description 1. 1 51-7906 TAILHOUSING, DIECAST 2. 1 52-7905 SHAFT, MAIN OUTPUT 3. 1 300474 SEAL WASHER, REAR YOKE 4. 1 300476 NUT, REAR YOKE 5. 1 300480 SEAL WASHER, FRONT
More information63162K 2015 Chevrolet Colorado 4WD Leveling Kit w/ 1 Rear Lift Kit
PRO COMP SUSPENSION 63162K 2015 Chevrolet Colorado 4WD Leveling Kit w/ 1 Rear Lift Kit This document contains very important information that includes warranty information and instructions for resolving
More information6000 Series Highlights
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationModels: D-03, G-03, G-13 and M-03
Parts Manual D03-991-2402C Models: D-03, G-03, G-13 and M-03 Kel-Cell and Standard Versions IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date
More informationReproduction. Not for 21" STEEL DECK EUROPEAN WALK BEHIND MOWERS SERIES 19 & 20. Parts Manual for
Parts Manual for 21" STEEL DECK EUROPEAN WALK BEHIND MOWERS SERIES 19 & 20 Model No. Description 7800041 EP217019BV 7800250 EP2187519BV 7800686 EP2187520 7800731 EP2187520 7800445 EP2187520BV 7800039 ERP2167519BV
More informationHub Stands -- VERSION 5.0
Hub Stands -- VERSION 5.0 Thanks for choosing our Alignment Hub Stands for your chassis setup needs. We hope you'll find them as handy, accurate, and easy to use as we do! Each stand has a max capacity
More informationMODELS EAH / EC/E TALL/3-Door Parts Manual Revision 1.04A
MODELS EAH / EC/E TALL/3-Door Parts Manual Revision 1.04A CMA DISHMACHINES 12700 KNOTT STREET GARDEN GROVE, CALIFORNIA 92841 800-854- 6417 FAX 714-895-2141 www.cmadishmachines.com TABLE OF CONTENTS PARTS
More informationCatálogo Asas, Punhos e Manetes
. Catálogo Asas, Punos e Manetes Loja: Av. Sacadura Cabral n.º37 A 1000-272 Lisboa el. 217940473 Fax 217969890 Escritório: Rua avid de Sousa n.º19 1000-105 Lisboa el.217906904 Fax 217906906 Bridge andles
More informationSteeda S550 MT-82 Tri-Ax Race Short Throw Shifter Installation Instructions For Parts: ,
Steeda S550 MT-82 Tri-Ax Race Short Throw Shifter Installation Instructions For Parts: 555-7317, 555-7318 Tools required 1. 7mm socket 2. 10mm socket 3. 13mm socket 4. 15mm socket 5. 18mm socket 6. 3/8
More informationReproduction. Not for 21" STEEL DECK EUROPEAN WALK BEHIND MOWERS SERIES 19 & 20. Parts Manual for
Parts Manual for WALK BEHIND MOWERS SERIES 19 & 20 Model No. Description 7800041 EP217019BV 7800250 EP2187519BV 7800686 EP2187520 7800731 EP2187520 7800445 EP2187520BV 7800039 ERP2167519BV 7800040 ERP217019BV
More information