Ludowici / Honert BRU TM Linear Motion Vibrating Screens. Vibrating Feeders. Features. Usage. Features and Benefits. Ideal For. Features.

Transcription

1 Screens

2 2 3 Ludowici / Honert BRU TM Linear Motion Vibrating Screens Vibrating Feeders These screens come in a wide range of sizes ranging from 0.9m to 4.8m wide and up to 11.0m long. They are available in horizontal, multi-slope and inclined versions coupled with single, double and triple deck configurations. The BRU TM exciter driven linear motion screens have long life-span providing customers with confidence and maximum operational efficiency. Key advantages Tough and durable: Fully huck-bolted assembly. Full continuous fillet welding and stress-relieving of all major fabricated parts. Easy to maintain: All major components are computer generated ensuring spare parts will fit with ease. Worldwide spare parts network and service capability. Screen range and flexible configuration: The largest size screens available to achieve the maximum possible capacity. FLSmidth Ludowici staff technical expertise to advise on the optimum screen size and configuration. ROM dump station Bin discharge ROM grizzly feeder Load out feeders Feed crushers and sizers Eccentric Shaft Linear Motion Pan Feeders and Grizzly Feeders The FLSmidth Ludowici PGM range is a medium and heavy duty design of linear motion pan feeders and grizzly feeders. It offers powerful straight-line motion through geared mechanism drive and a high G-force action to guarantee maximum efficiencies. Widths and lengths to suit all applications Grizzly bars can be incorporated if required Horizontal or declined configuration with fully lined pan or wear resistant grizzly bars Wear resistant grizzly bars Fully replaceable pan wear liners Linear motion provided by the Malco dual eccentric shaft exciters Ideal For Desliming Product and reject drain and rinsing Dewatering Trash Scalping Sizing Classification Primary, secondary, tertiary and quaternary crushing SAG mill discharge Grinding mills Recycling Carbon recovery Full quality assurance and quality control system in line with world s best practices. and Benefits Wide range of sizes with widths - up to 4.8m wide and 11m long High G-force operation of up to 5.0 for optimum screening efficiency Floor mounted on galvanised steel coil springs to give up to 98% vibration isolation Linear motion provided by the reliable Honert Brute Force geared exciter Suitable for a large range of screen media including modular panels, cross tensioned screen cloths and bolted screen panels Available in single, double and triple deck configurations Available in horizontal, multi-slope and inclined versions Used in primary dump station applications Feeders are specifically designed to receive ROM mineral feed and deliver onto either a conveyor belt or primary crusher or sizer Exciter Driven Pan Feeders and Grizzly Feeder The FLSmidth Ludowici BRU TM model grizzly feeders are used in primary sizing applications. The machines are specifically designed to handle large material lump sizes at high feed rates. Operating at up to 5.0 G-force, the grizzly feeders are guaranteed to minimise pegging and deliver efficient separation. Wide range of sizes with widths up to 3.6m Extra-heavy duty design and driven by our proven exciter mechanisms Deck cross-members are individually bolted for ease of replacement Guaranteed maximum positive displacement and material throughout High G-force performance provides increased capacities and efficient separation and media recovery Cross-members and drive beams are machined prior to assembly

3 4 5 High Frequency Dewatering Screens Unbalanced Motor Driven Pan Feeders The unbalanced feeder range is a FLSmidth Ludowici medium to heavy-duty vibrator motor driven feeder design and is ideal for handling most minerals, grain and wood chips. The VSW range is a FLSmidth Ludowici heavy duty high frequency dewatering screen. This linear motion product has been specifically designed for effective dewatering of fine coal and minerals. With a high frequency and high G force linear motion action, the VSW range guarantees maximum dewatering. ROM dump stations Bin discharge Reclaim tunnels Vibrating screens Wide range of sizes to suit all applications Two to eight pole vibrators available Medium duty design capable of handling material -300mm in size and delivering feed rates between 0 2,500 t/h Supplied as horizontal or declined configuration with fully lined pan Floor mounted or cable suspended Rotary type vibrating motors ensures quiet operation Vibratory force can be set easily by adjusting the unbalanced weights Totally enclosed vibrator housings suited for use in dusty environments, meeting the requirements of the IP-66, International Protection Standards Linear motion provided by reliable, low noise vibrator motors Fully replaceable pan wear liners Anti-vibration devices to ensure long service life Periodical lubrication of medium and large capacity models can be carried out from outside via grease nipples Specifically designed to dewater slurry containing fine particles from 0mm to 4mm such as: Coal Iron ore Sand Available in widths of between 0.6m to 2.4m Suitable for a large range of modular polyurethane or wedge wire screen panels Installed at five degrees uphill to promote maximum dewatering Integral back plate complete with screen panels Screen drive by twin out-of-balance vibrating motors, counter-rotating to provide linear motion Floor mounted on galvanised steel coil springs minimising transfer vibration into the supporting structure Linear motion provided by vibrator motors

4 6 7 Exciter Mechanism Drives Circular Motion Screens FLSmidth Ludowici offers a wide range of electromechanical exciter mechanisms suitable for all applications and industries. Finite element analysis of every component SG iron or cast steel housings Compatible hold down bolt pattern Low noise emission to 70dBA Use of high quality European manufactured bearings Precision ground helical gears Triple layer oil sealing protection Circulating oil lubrication of all bearings Triple Layer Oil Sealing Protection Bearing Cover UPM, CASM, CADM, CBSM, CBDM and CIP models The medium duty inclined circular motion screen range specifically designed for continuous operation in many varied applications. UPM model The UPM model is the culmination of extensive field experience with this long standing industry standard declined vibrating screen. This popular model is renowned for low capital cost and the long term field proven reliability of its mechanical vibrator. UPM Stress relieved larger sizes Fine gauge stainless steel woven wire screen cloth securely cross tensioned over rubber capped and cambered longitudinal deck members Spring control of cross tensioning clamps to assure maximum practical life of screen cloth Suppliable as initial equipment with optional flat stainless steel wedge wire screen deck Four point coil spring support system providing maximum isolation of vibration from mounting structures Spring surfaces treated against corrosion Optional integral unbalanced drive motor in place of the standard mechanical vibrator Basic feed hopper to reduce flow velocity Two or more repulping troughs along the overall length of the screen into which water spray can be directed Welded, unitised construction of vibrating screen frame and deck from low carbon steel (1.8m wide models have bolted construction) Grease Purged Labyrinth Oil Flinger Lip Seal Cross section of triple layer oil sealing protection. V-Ring Seal O-Ring Seal Shaft Gold Minerals Agriculture Civil aggregate CIL process Carbon recovery Dewatering Trash Scalping Sizing Classification Recycling Wood chip Food processing Wide range of sizes with widths up to 2.4m by 7.2m long Available in single, double and triple deck configurations Available in standard duty, heavy duty and extra heavy duty designs Suitable for a large range of modular, bolt down or cross tensioned screen media Circular motion provided by reliable low noise single or dual eccentric shafts

5 8 9 Screen Motion Analyser Sieve Bends The screen motion analyser helps maintain vibrating equipment and reduce downtime and costs. How it works The ccreen motion analyser records the vibrations in three directions simultaneously and sends the information via bluetooth to a smartphone to create a tridimensional plot of a screen or feeder motion. The screen motion analyser can be used to check and confirm: That the vibrating screen is stroking correctly to optimise the machine life, performance and efficiency That the vibrating screen is not running near any natural frequencies, which can result in significant irreversible damage Analysis can be done at regular intervals, after a change to the screen, or as a precautionary measure. If a problem is identified, the data can be downloaded to an external source for more detailed analysis. Data can also be sent to your nearest FLSmidth Ludowici equipment analyst for an expert opinion. The screen motion analyser can be purchased for on-site convenience, or alternatively, FLSmidth Ludowici can offer screen motion analysis as a service by one of our qualified service technicians. The FLSmidth Ludowici sieve bend range has been specifically designed to separate fine solids from slurry for a range of applications such as quarries, minerals, agriculture, food processing, wood chip and waste water. The sieve bend can be supplied as static (SBS), roll back (SBR) or yoke mounted (SBY) models. The roll back and yoke mounted function allows the sieve bend to be rotated, which ensures the operating efficiency and screen panel life is maximised. How it works Solids-bearing liquid (slurry) is poured into the feed box and overflows onto the screen. The sharp, leading edge of each wedge wire slices away a thin layer of water and small particle solids. Larger particles continue down the screen surface until most of the liquid is removed. The size of particles is determined by the size of the coal particles and their settling velocity in the liquid. Separation size, in most operations, is usually about half the size of the screen opening. Benefits and Easy to use and interpret Can be used safely without impacting production Does not require specialist training or advanced knowledge in vibration analysis Low cost, with only one analyser required on each site Unit temporarily attached to screen using magnets Horizontal, vertical and lateral vibrations simultaneously recorded Vibration data is sent to a touch screen Smartphone via blue tooth Simple to interpret plot showing 3D screen motion Touch screen operation with rotatable view and 2D set views Calculates and displays screen operating frequency, vibrating stroke and lateral displacement (pk-pk) Can save files as a record or for further analysis Civil aggregate CIL process Dewatering Trash Scalping Sizing Classification Waste water Food processing Wide range of sizes with widths up to 3.6m Suitable for a range of screening media such as stainless steel wedge wire or polyurethane Quality wear materials such as alumina and quarry tile or vulcanised rubber

6 10 11 Jetslingers Stockpile Dischargers and Coal Valves Stockpiling - Can be ground based (fixed or mobile on trolley), mounted on a traveling tripper, or at the discharge end of a stacking boom. Ship loading - Loading bulk carrier ships with small hatch access and below deck obstructions. The Jetslinger is suspended from the shore based ship loading boom by a telescopic chute which allows the unit to be lowered into the ship s hold. FLSmidth Ludowici designs and manufactures Jetslingers to suit almost every bulk storage and loading requirement. Jetslingers consist of a very short centre high speed (up to 20m/sec) belt conveyor. The carrying surface of the belt is held in a concave curve by hold down rollers at each side of the belt. A specially designed vertical chute directs the material onto the optimum area of the curved belt between the rollers before being forced against the belt by centrifugal force as it travels the concave path. It rapidly reaches the same speed as the belt and is thrown from the Jetslinger as the belt passes over the front pulley. and Benefits The trajectory of the material is controlled by raising or lowering the front pulley, while the direction of material is controlled by slewing the complete Jetslinger body. Design Parameters: Variations in bulk density, moisture, shape, particle sizing and other material characteristics affect capacity. Handling softer materials (e.g. woodchips) Jetslingers can throw material as far as 30 metres horizontally (i.e. 20m to apex of throw) and pile it to a height of 10 metres above the discharge pulley. The distance thrown will vary depending on the materials, belt speed, method of feeding the unit and the vertical height available for free falling the feed material onto the high-speed belt. Rotating components of the belt conveyor are dynamically balanced for smooth, trouble free operation Removable lower belt cartridge incorporating the drive and non-drive belt pulleys, and the Jetslinger belt Quick-release belt cartridge design providing a much easier and quicker belt changeover compared with conventional Jetslingers approx. 30 minutes compared to four hours FLSmidth Ludowici designs and manufactures stockpile dischargers (SPD) with more than 180 manufactured to date. : Support frame (Cast-in frame) Cast-in support frame is a heavy steel ring beam for casting into the concrete roof to support both the SPD and the coal valve i.e. keeps tunnel floor clear Cast-in frame simplifies the civil form work and incorporates four water drainage outlets Stockpile discharger High-energy twin drive mechanisms: 2 x 11 kw for SPD11 2 x 22 kw for SPD15 Exciter configuration produces a vertical lift and horizontal twist action and transmits the full force into the stockpile. Drive is via direct coupled cardan shafts, not v-belt driven Standard off the shelf mining specification drive motors SPD functions controlled by site PLC timer and by microwave starve switch Benefits and Cast-in frame can deliver cost-savings System constructed for ease of maintenance Electro mechanical linear actuators allow stand alone operation of each equipment combination Cut-off gate capable of being closed through a static head of coal Conveyor load skirts/hopper prevents sloughing of coal slurry into tunnell Coal valve Double acting gate system including a control gate and a cut-off gate Gates are curved to promote material flow in the direction of the reclaim conveyor, thus minimizing conveyor belt wear Electro mechanical linear actuators fitted to both the control gate and the cut-off gate Coal valve functions controlled by site PLC Conveyor load skirts/hopper Designed in conjunction with the coal valve and reclaim conveyor to prevent flooding of tunnel Rear section flared to allow entrance of up-stream material Adjustable profile outlet plate to ensure smooth conveyor loading Applications: Designed to facilitate a controlled outloading rate of typically 5,000 tonnes per hour

7 Copyright 2013 FLSmidth A/S. ALL RIGHTS RESERVED. FLSmidth is a (registered) trademark of FLSmidth A/S. This brochure makes no offers, representations or warranties (express or implied), and information and data contained in this brochure are for general reference only and may change at any time. Rev. 07/03/2013 pjoh-au