Service Bulletin #108 2WD Hub Bearing Assembly Replacement
|
|
- Cecily Atkins
- 6 years ago
- Views:
Transcription
1 Service Bulletin #08 October 5, 2008 Models Affected: SJ 727, SJ 735, SJ 883, SJ 884, SJ 9250 SJ 727 and SJ , , , , , to , , to , , , , , , , , , to , , to , to , to , to , 34085, , to , 3400 to 3408, 34084, 34085, 3425 to 3428, to 34405, to 34430, to 3445, to 34458, 3452, 34776, 34777, to 34798, to 34805, 34828, to 34835, to 34848, 34850, 34938, 34939, 34944, 34945, 34950, 3495, to 34202, to 34228, to 3424, , , to , , , SJ , to 37368, 37372, to 37380, 37387, to 37404, to 37436, 3744 to 37445, 37447, 37456, 37457, to 37468, to 37480, to 37492, 37552, to 37587, 376 to 3765, to 37646, to SJ , to 42827, 42829, 42830, 42848, 42849, 42857, to 42886, 42890, 42892, to 42905, 42930, 42953, 42959, 42960, to 42966, 42973, to 42989, to 43003, 4302 to 43028, to 4304, to 43049, 43052, 43053, to 43058, to 43068, 43075, 4308, 43082, to 43094, 4300, 430, 430 to 433, 436, 4320, 43202, to 43228, 43236, 43237, 4327, 43272, 43274, 43284, to 43300, to 4335, 43322, to 43360, 4338 to 43384, 434 to 43420, to 43498, 435, 4355, 4356, to 4354, 43547, 4358 to 43585, 43742, 43744, 4382 to 4385, to , , , , , , , 40000, , , , , , to , to , to , to , to , , , , , to , to , , , , SJ , 5082 to 509, 5094, 5096, 5099 to 502, 507 to 5, 54, 55, 58, 59, 523 to 527, 539 to 549, 553 to 557, 559 to 56, 572 to 58, 586, 587, 589 to 597, 5200 to 5205, 5207, 5209, 52, 523 to 525, 528 to 522, 5223, 5226, 5227, 5230, 523, 5235, 5238 to 5242, 5245, 5246, 5267 to Skyjack Corporation USA 345 Swenson Ave St. Charles IL 6074 USA INDUSTRIAL GROUP Tel: Fax: linamar.com skyjack.com A Division of Linamar Holdings Inc.
2 5272, 5275 to 5277, 5280 to 5283, 5286 to 5288, 5297, 5299, 5304 to 5306, 536 to 538, 5320 to 5323, 5326 to 5329, 533 to 5333, 5337 to 5340, 5343 to 5360, 5362 to 537, 5396, 545 to 5457, 5465 to 5468, 5470, 5484, 5485, 5493 to 5496, 5498, 5499, 5503 to 5505, 5524 to 5528, 5534 to 554, 5545 to 5578, 5580 to 5586, 5593 to 560, 5627, 5629 to 5633, 5644, 5650, 5665 to 5670, 5676 to 5680, 5696 to 5703, 573, 574, 5732 to 5734, Introduction: In our continuing effort to provide the safest possible product to our customers and yours, we require that the following hub bearing assembly replacement be completed for all machines listed above. Component materials and assembly procedure combined with maintenance factors may lead to the life expectancy of this assembly being less than expected. Procedure: All units within the above serial number ranges must have the attached hub bearing assembly replacement completed as specified in the attached procedure. Parts and Warranty Policy: Skyjack Inc. will pay up to 2 hours of labor for replacement of these assemblies. Request the necessary parts to complete this bulletin by using attached part request form. Upon completion of this service bulletin, please submit a warranty claim form for each machine stating that Service Bulletin #08 has been completed. Ownership of Machines: If you have sold or transferred a machine(s) with the serial numbers listed above, it is your responsibility to forward this service bulletin to the current owner and to notify Skyjack Inc. Contact Information: We regret the inconvenience and appreciate your cooperation. If you have any questions please call Skyjack Service at , or (Europe). You can any questions to service@skyjack.com. Skyjack Corporation USA 345 Swenson Ave St. Charles IL 6074 USA INDUSTRIAL GROUP Tel: Fax: linamar.com skyjack.com A Division of Linamar Holdings Inc.
3 Service Bulletin #08 Parts Kit Shipment Request Form Customer Name: Date: Customer Location: Address: Phone: City: Fax: State: Zip: Contact Name: We are requesting parts kit shipment for the following machines to comply with Service Bulletin #08. Please fill in the serial numbers of units in your possession that require a parts kit shipment for this bulletin to be completed. Machine Serial Number Machine Serial Number Machine Serial Number Please Fax This Form To: Skyjack Service Fax: (630) or (Europe) If you have any questions please call Skyjack Service at , or (Europe). You can any questions to service@skyjack.com If you have sold or transferred a machine(s) with the serial numbers listed above, it is your responsibility to forward this service bulletin to the current owner and to notify Skyjack Inc. Skyjack Corporation USA 345 Swenson Ave St. Charles IL 6074 USA INDUSTRIAL GROUP Tel: Fax: linamar.com skyjack.com A Division of Linamar Holdings Inc.
4 Part # 2520AA TM 2WD Hub Bearing Assembly Replacement Models SJ7xx, SJ8xxx & SJ AA October 2008
5 Table of Contents 2WD Hub Bearing Assembly Parts Inventory...3 Procedure...4 WARNING Only trained and authorized personnel shall be permitted to service an aerial platform. WARNING Read all instructions closely before attempting each step of the installation. If you have questions with any of the steps in this procedure, contact SKYJACK Service Department at: North America & Asia: Europe: ( : ( : : : If you have not received the complete parts inventory, contact SKYJACK Service Department. As specified in parts inventory, two kits are required to complete this bulletin. SKYJACK, Page 2 October AA
6 2WD Hub Bearing Assembly Parts Inventory Index No. Skyjack Part No. Qty. Description FIELD KIT, DUST CAP COTTER PIN, 3/6 x -/2 CASTLE FLANGED NUT, -4 WASHER, HARDENED BEARING CONE - LM48548 BEARING CUP - LM4850 Reference: HUB, FRONT, 5000 LB. * BEARING CUP - LM6030 BEARING CONE - LM GREASE SEAL Reference: Spindle Weldment * FIELD INSTRUCTION, : * - not included in the kit 2520AA October 2008 SKYJACK, Page 3
7 Procedure Figure. Hub Assembly - with Castle Nut Keep work area clean and visibly free from contamination at all times.. Ensure aerial platform is parked on a firm, level surface. Chock or block the wheels to keep the aerial platform from rolling forward or backward. 2. Fully lower the platform. 3. Using a suitable lifting device or outriggers (if equipped), lift the end of the aerial platform with the steer axle. CAUTION Use a suitably-rated support stand to support aerial platform while performing the following operations. 4. Turn emergency main power disconnect switch to off position. 5. Remove wheel assembly. 6. Remove dust cap (item ) to access internal components of hub assembly. 7. Pull cotter pin (item 2) out of spindle arm (item ) and then remove castle nut (item 3), washer (item 4) and outer bearing cone (item 5). Dispose of dust cap, cotter pin, castle nut, washer, and outer bearing cone. 8. Flip hub over and then remove and discard inner bearing cone (item 8) and grease seal (item 0). 9. Remove and discard both inner and outer bearing cups (items 6 & 8) from hub. 0. Remove grease from spindle arm and hub and look for signs of visible damage. If damage is found on the hub or on the spindle arm, contact Service Department immediately using information found in page 2 for further instructions.. Press new bearing cups (items 6 & 8) into hub. 2. Pack replacement inner and outer bearings by either pressing wheel bearing grease into each roller by hand or using a bearing packer and grease gun. Ensure that grease is forced into all surfaces of the bearing. SKYJACK, Page 4 October AA
8 Castle Flanged Nut Figure 2. Hub Assembly - with Castle Flanged Nut Use only recommended wheel bearing grease - NLGI (National Lubricating Grease Institute) Grade #2 or equivalent. The bearings must be packed before installing. 3. Install replacement inner bearing in the race and then seat the new grease seal. Flip hub over and install replacement outer bearing. 4. Install hub on the spindle. 5. Install replacement washer and replacement castle flanged nut. Hand tighten the castle flanged nut until it touches the washer. Turn hub by hand to ensure smooth running. No resistance should be felt at this time. 6. Take a torque wrench and set it at 30 ft-lb, and while continuously rotating hub, tighten castle flanged nut. While hub is being turned and nut tightened, resistance will increase. 8. Using a torque wrench set to 5 ft-lb, tighten castle flanged nut. Turn wheel hub and check for smooth turning. 9. Check for alignment of the castle flanged nut with one of the cross holes in spindle arm. If required, loosen nut to align with nearest hole. Use an open-ended wrench to be able to see the cross holes. The nut should not be turned more than 5 degrees. Secure with new cotter pin. Check again for smooth turning of wheel hub. The wheel hub should turn but with slight resistance. 20. Grab the top and bottom of the hub and check for play. There should be no evidence of play. 2. Install dust cap back on hub assembly. 22. Install wheel assembly. Torque nuts or bolts to 40 ft-lb. 23. Repeat steps 5 to 22 for the other hub assembly. 24. Lower the aerial platform. 7. Using an open-ended wrench, loosen castle flanged nut a /4 turn while turning the wheel hub. It should turn easily. The nut should not come completely loose. 2520AA October 2008 SKYJACK, Page 5
9 TM MOBILE ELEVATING PLATFORMS
Service Bulletin #117 SJ7127 RT, SJ7135 RT, SJ8841 RT, SJ9250 RT Brake Manifold Assembly Replacement
Service Bulletin #117 SJ7127 RT, SJ7135 RT, SJ8841 RT, SJ9250 RT September 4, 2013 Models Affected: SJ7127 RT, SJ7135 RT, SJ8841 RT, SJ9250 RT SJ7127 RT 34002586, 34002587, 34002588, 34002592 SJ7135 RT
More informationIf you have any questions with respect to this policy, please call Skyjack at You may any questions to
Dear Customer, Skyjack policy is to fully support all service bulletins for 5 years from the original date of issue. The attached service Bulletin was originally released to all owners of these units more
More informationService Bulletin #125 SJ 40T/45T/61T/66T/63AJ System Pump Replacement
Service Bulletin #125 SJ 40T/45T/61T/66T/63AJ April 16, 2014 Models Affected: SJ40T, SJ45 T, SJ 61T, SJ66T, SJ63 AJ SJ40T 98001175, 98001176, 98001177, 98001178, 98001179, 98001181, 98001187, 98001201,
More information**********SAFETY RELATED**********
Service Bulletin #124 SJ 40T/45T/61T/66T/46AJ/51AJ Installation and Axle Drive Motor Replacement **********SAFETY RELATED********** March 28, 2014 Models Affected: SJ40T, SJ45 T, SJ 61T, SJ66T, SJ46 AJ,
More informationIf you have any questions with respect to this policy, please call Skyjack at You may any questions to
Dear Customer, Skyjack policy is to fully support all service bulletins for 5 years from the original date of issue. The attached service Bulletin was originally released to all owners of these units more
More informationTB Technical Bulletin. Harlan Drive Axle Series 1 Inner Wheel Bearing Inspection. Product Improvement News. Feb. 19, 08 Page 1 of 31 Pages
Page 1 of 31 Pages Harlan Drive Axle Series 1 Inner Wheel Bearing Inspection February 19, 2008 Page 2 of 31 Pages Phone Numbers Harlan Global Manufacturing 27 Stanley Road Kansas City, KS 66115 USA...800
More information1988 Chevrolet Pickup V SUSPENSION - FRONT (4WD)' 'Front Suspension - "V" Series 1988 SUSPENSION - FRONT (4WD) Front Suspension - "V" Series
1988 SUSPENSION - FRONT (4WD) Front Suspension - "V" Series DESCRIPTION NOTE: Vehicle serial numbers used in this article has been abbreviated for common reference to Chevrolet and GMC models. Chevrolet
More informationPleasereadandfulyunderstandthisprocedurepriortoperforminganybearingmaintenance.
Pleasereadandfulyunderstandthisprocedurepriortoperforminganybearingmaintenance. Thismanualoutlinesgeneraldirectionsforbearingmaintenanceusingtestedefective techniques.additionaly,alcommonandacceptedsafetypracticesaretobefolowedin
More informationkit contents trail-safe samurai inner axle seal suzuki samurai (all engines) InstalLation Instructions
InstalLation Instructions trail-safe samurai inner axle seal 300748-3-kit 1986-1995 suzuki samurai (all engines) kit contents 5356 PINE AVE FRESNO, CA 93727 USA TOLL FREE: 877.4X4.TOYS WORLDWIDE: 559.252.4950
More informationTECHNICAL BULLETIN. Servicing Meritor TM EASY STEER PLUS TM Series Unitized Truck Hub Unit Assembly
TP-9819 Revised 12-97 TECHNICAL BULLETIN Servicing Meritor TM EASY STEER PLUS TM Series Unitized Truck Hub Unit Assembly Attention Freightliner dealers and direct warranty customers. Please discard this
More informationFig. 1: Exploded view of the 2WD hub and bearings
Page 1 of 8 Front Wheel Bearings REPLACEMENT NOTE: Sodium-based grease is not compatible with lithium-based grease. Read the package labels and be careful not to mix the two types. If there is any doubt
More informationPARTS MAN UAL SDA-1200 STEER ABLE DRIVE AXLE SDA-1400 STEER ABLE DRIVE AXLE SDA-1600 STEER ABLE DRIVE AXLE
PARTS MAN UAL SDA-1200 STEER ABLE DRIVE AXLE SDA-1400 STEER ABLE DRIVE AXLE SDA-1600 STEER ABLE DRIVE AXLE WITH EX TENDED SERV ICE BRAKES AND ABS PRO VI SIONS Fabco Automotive Corporation, Livermore, CA
More informationTMC TRAILER AXLE SERVICE MANUAL DRUM BRAKE AXLES
8 8 TMC Australia a Pty Ltd TMC TRAILER AXLE SERVICE MANUAL DRUM BRAKE AXLES TMC 0 59 TMC TRAILER AXLE TMC TRAILER AXLE TMC TRAILER AXLE TM 0 5 9 TMC Australia Pty Ltd Telephone: + 6 3 8786 3688 78 Star
More informationWHEN TO GREASE WARNING: NOTE:
The Bearing Lube system provides an easy way to fill axle hubs and repack bearings with grease to ensure proper bearing lubrication. To locate the grease (zerc) fitting, simply remove the rubber plug in
More information*THIS KIT IS NOT INTENDED FOR VEHICLES WITH ABS*
*THIS KIT IS NOT INTENDED FOR VEHICLES WITH ABS* Notes: New full-cast rotors from 1990 or newer Wrangler must be used with this kit, this rotor (ITT #65225 or equivalent) has a.25 thick mounting flange.
More informationInspection and Verification, Ranger
file://c:\tso\tsocache\vdtom_5368\svk~us~en~file=svk53a03.htm~gen~ref.htm Page 1 of 1 Section 05-03A: Wheel Hubs and Bearings, Front Wheels, 4- Wheel Drive DIAGNOSIS AND TESTING 1997 Ranger 4x4 with Dana
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS 1075 North Ave. Sanger, CA 93657-3539 local: 559-875-0222 fax: 559-876-2259 toll free: 800-445-3767 3100-3200 3 DROPPED FRONT SPINDLE 73-87 1/2 TON C-10 PICK-UP / 1/2 TON BLAZER
More informationJK 8 Lug Front Locking Hub Conversion Kit
JK 8 Lug Front Locking Hub Conversion Kit Kit #3034411 w/ Performance Rotors Kit #3034410 w/ Performance Slotted Rotors Kit #3034412 w/ Big Brake Kit Kit #3034413 w/ Big Brake Kit and Slotted Rotors Important
More informationTidland Raptor Series Torque Chuck
TIDLAND WINDING SOLUTIONS Tidland Raptor Series Torque Chuck User Manual EN MI 660289 1 H Includes 3", 4" 6" chucks and adapters TABLE OF CONTENTS Caution... 3 Tidland Customer Service... 3 Recommended
More informationService Bulletin No. 346
Service Bulletin No. 346 MODEL TYPE SECTION/GROUP DATE E / J Series Coaches Field Change Program 15--Wheel May 28, 2010 SUBJECT ARVINMERITOR WHEEL ADAPTER CAPSCREWS ON UWE AXLES CONDITIONS Ref. ARVINMERITOR
More informationINSTRUCTION MANUAL. with ILLUSTRATED PARTS LIST. for TRAILER AND ACCESSORIES. Part Number (10,000 Pound Capacity)
TO-37 0079 0884 07586 INSTRUCTION MANUAL with ILLUSTRATED PARTS LIST for TRAILER AND ACCESSORIES Part Number 48388- (0,000 Pound Capacity) manufactured by HOBART BROTHERS COMPANY POWER SYSTEMS DIVISION
More information1984 Dodge W250 PICKUP
1984 Dodge W250 PICKUP Submodel: Engine Type: V8 Liters: 5.2 Fuel Delivery: CARB Fuel: GAS Dana 44 MODELS THROUGH 1984 2. Raise and safely support the vehicle, then remove the wheel hub and bearings as
More informationDEBRIS BLOWER 2613 BLOWER ASSEMBLY PARTS CATALOG MODEL NO & UP. The TORO Company All Rights Reserved. FORM NO Rev.
FORM NO. 01-505-0440 Rev. D MODEL NO. 44520-20101 & UP PARTS CATALOG DEBRIS BLOWER 2613 Part 1 61-005-0073 Hitch & Lower Housing 1 2 61-005-0121 Fan Housing 1 3 61-005-0061 Fan Assembly 1 4 01-113-0070
More informationWheel end service for greased wheel ends
wheel ends Page 1 Tech tip Scope This document recommends procedures for servicing greased wheel ends. Included are SKF recommendations for manually adjusted, hard greased (NLGI 1, 2, and 3) and semi-fluid
More informationWRANGLER, CHEROKEE AND COMANCHE, FRONT AXLE WHEEL HUB CONVERSION KIT
WRANGLER, CHEROKEE AND COMANCHE, FRONT AXLE WHEEL HUB CONVERSION KIT -YA WU-07 5 x 4.5 -YA WU-08 5 x 5.5 *THIS KIT IS NOT INTENDED FOR VEHICLES WITH ABS AND YA WU-08 WILL CHANGE BOLT PATTERN TO 5 ON 5.5*
More informationSERVICE BULLETIN THIS BULLETIN IS FAA APPROVED FOR ENGINEERING DESIGN
SERVICE BULLETIN SERVICE BULLETIN M20-325 THIS BULLETIN IS FAA APPROVED FOR ENGINEERING DESIGN SUBJECT: Service Instruction M20-88A - STABILIZER TRIM STOP/SCREW MODIFICATION Dated 12/14/2016. MODELS/ SN
More informationNORTHSTAR TRAILERS. Assembly Guide for SPORTSTAR II Trailer
NORTHSTAR TRAILERS Assembly Guide for SPORTSTAR II Trailer Congratulations! You are the proud owner of a NORTHSTAR trailer. Please follow the instructions and steps in this manual for proper assembly.
More informationTECHNICAL BULLETIN. TP Issued Servicing Rockwell s TB Series Trailer Axles with Unitized Hub Assemblies
TECHNICAL BULLETIN TP-96175 Issued 12-96 Servicing Rockwell s TB Series Trailer Axles with Unitized Hub Assemblies TB Series Trailer Axles Introduction Rockwell s TB series trailer axle features a permanently
More information(DM) RAM Truck (4500/5500 Cab Chassis) (DP) RAM Truck (4500/5500 Cab Chassis)
Dealer Service Instructions for: Safety Recall R16 / NHTSA 13V-527 Steering Linkage May 2015 NOTE: Safety Recall N63 is being cancelled. All vehicles involved in Safety Recall N63 must have this recall
More informationLIFT Drop Spindle Lift Kit E-Z-Go RXV Gas or Electric Installation Instructions
LIFT-107 6 Drop Spindle Lift Kit E-Z-Go RXV Gas or Electric Installation Instructions Contents of LIFT-107 E-Z-Go RXV Drop Spindle Lift Kit: a (1 ea.) Driver Side Spindle b (1 ea.) Passenger Side Spindle
More information(WK) Jeep Grand Cherokee (WD) Dodge Durango
Dealer Service Instructions for: Safety Recall S16 Left Front Brake Caliper Revised May 2016 Models NOTE: The wheel lug nut torque specification has been updated. 2015-2016 (WK) Jeep Grand Cherokee (WD)
More informationINSTRUCTIONS FOR CONTINUED AIRWORTHINESS
INSTRUCTIONS FOR CONTINUED AIRWORTHINESS for GROVE MODEL 40-108 & 40-208 MAIN WHEELS DOCUMENT 12012-12 REV IR January 16, 2012 TABLE OF CONTENTS SECTION PAGE Title Page...1 Table of Contents...2 Record
More information2000 Ranger Workshop Manual
SECTION 211-02: Power Steering 2000 Ranger Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 06/1/1999 Gear Torsion Bar Suspension Special Tool(s) Remover, Tie Rod End 211-001 (TOOL-3290-D)
More informationGRAIN DECK BELT CONVEYOR PARTS LIST SERIAL NOS
GRAIN DECK BELT CONVEYOR PARTS LIST SERIAL NOS. 112000-115499 1 DISCHARGE ASSEMBLY - GRAIN BELT DRIVE OVER CONVEYOR SERIAL NOS. 112000-115499 2 REF # PART NO. DESCRIPTION QTY 1 C200760 Discharge Weldment
More information2995 XFC Fertilizer Coulter 2995 XCC Cutting Coulter OPERATORS MANUAL
2995 XFC Fertilizer Coulter 2995 XCC Cutting Coulter OPERATORS MANUAL WITH PARTS IDENTIFICATION 2565-788_REV_A 09/2017 YETTER MANUFACTURING CO. FOUNDED 1930 Colchester, IL 62326-0358 Toll free: 800/447-5777
More informationTO: ALL ELGIN DISTRIBUTORS SERVICE AND PARTS MANAGERS. SUBJECT: Pelican P, PW, & SE Brake Master Cylinder Mandatory Campaign
Subsidiary of Federal Signal Corporation TO: ALL ELGIN DISTRIBUTORS SERVICE AND PARTS MANAGERS SUBJECT: Pelican P, PW, & SE Brake Master Cylinder Mandatory Campaign Effectivity: Sweepers: P4389D - P4469S,
More information2987 NH3 MAGNUM _REV_M 02/2017
2987 NH3 MAGNUM 2565-758_REV_M 02/2017 YETTER MANUFACTURING CO. FOUNDED 1930 Colchester, IL 62326-0358 Toll free: 800/447-5777 309/776-3222 (Fax) Website: www.yetterco.com E-mail: info@yetterco.com 2 3
More informationRear Axle Hub, Bearing, Cup, and/or Seal Replacement
Page 1 of 11 Rear Axle Hub, Bearing, Cup, and/or Seal Replacement Special Tools J 8092 Universal Driver Handle - 3/4 inch - 10 J 2222-C Wheel Bearing Nut Wrench J 24426 Wheel Bearing Race Installer - Outer
More informationLIFT-507 BMF Lift Kit E-Z-Go RXV Gas or Electric Installation Instructions
LIFT-507 BMF Lift Kit E-Z-Go RXV Gas or Electric Installation Instructions Contents of LIFT-507 E-Z-Go RXV BMF Lift Kit: a (1 ea.) BMF A-Arm Assembly b (1 ea.) Driver Side Shock Tower c (1 ea.) Passenger
More information201 Series Portable Drum Rotators Operator s Manual for Morse Portable Drum Rotators
Contents Page Receiving Procedures.................... 1 Warranty............................. 1 Safety Information..................... 1-2 Machine Description................... 3 Options.............................
More informationNORTHSTAR TRAILERS. Assembly Guide for MULTISTAR Trailer
NORTHSTAR TRAILERS Assembly Guide for MULTISTAR Trailer Congratulations! You are the proud owner of a NORTHSTAR trailer. Please follow the instructions and steps in this manual for proper assembly. TRAILER
More informationPARTS MANUAL VR 1214 BALE KING V-RAKE GREEN AND YELLOW NUMBERS
PARTS MANUAL VR 1214 BALE KING V-RAKE GREEN AND YELLOW NUMBERS MANUFACTURED BY: BRIDGEVIEW MANUFACTURING INC. P.O. BOX 4 GERALD, SASK. CANADA S0A 1B0 PHONE: (306) 745-2711 FAX: (306) 745-3364 TABLE OF
More informationGear Products Inc N. 161st E. Ave. Tulsa, OK Phone (918) Fax (918)
SERVICE MANUAL Disassembly & Assembly Procedures Worm Gear Swing Drive 003 Series Gear Products Inc. 1111 N. 161st E. Ave. Tulsa, OK 74116 Phone (918) 234-3044 Fax (918) 234-3455 Worm Gear Swing Drive
More information26 Hume Reserve Court, Nth. Geelong, 3215 Phone: (03) Fax: (03) INSTALLATION MANUAL. for
26 Hume Reserve Court, Nth. Geelong, 3215 Phone: (03) 5272 2844 Fax: (03) 5272 2633 GEARLESS CENTRE DIFFERENTIAL FULL-TIME 4X4 TRANSFER CASE CONVERSION DEDICATED LOW RANGE INSTALLATION MANUAL for TOYOTA
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS 2100 DROPPED FRONT SPINDLE CHEVROLET 2WD S-10 / S-15 PICKUP / BLAZER / JIMMY, including models with ABS General Motors G-Body Rear Wheel Drive Cars CONGRATULATIONS! You were selective
More informationFront Brake Vibration
T-SB-0131-12 August 8, 2012 Service Category Brake Section Brake (front) Market USA Applicability YEAR(S) MODEL(S) ADDITIONAL INFORMATION 2008 2012 Sequoia 2007 2012 Tundra Introduction Some 2008 2012
More information2. Rear Axle 4-2 [W2A1] SERVICE PROCEDURE A: REMOVAL 1. DISC BRAKE. Tightening torque: 27.0±2.5 N m (2.75±0.25 kg-m, 19.9±1.
4-2 [W2A1] SERVICE PROCEDURE 9) Install tie-rod end ball joint on housing knuckle arm. 27.0±2.5 N m (2.75±0.25 kg-m, 19.9±1.8 (1) Cotter pin (2) Castle nut (3) Tie-rod B4M2214B 10) While depressing brake
More informationInstallation manual. Toyota Tundra 4WD & 2WD. 2.5 Suspension kit. Part # Part # Important customer information:
Installation manual 2007-2016 Toyota Tundra 4WD & 2WD 2.5 Suspension kit Part # 53070 sj11082011rev.03 Part # 53070 2007-2016 Toyota Tundra 4WD & 2WD 2.5 Suspension kit Part # Description Qty. 53070-01
More informationDecember 2004 Distributor/Dealer Service Instructions for: Safety Recall D55 Right Steering Knuckle. Models
December 2004 Distributor/Dealer Service Instructions for: Safety Recall D55 Right Steering Knuckle Models 2005 (JR) Dodge Stratus Sedan and Chrysler Sebring Sedan/Convertible NOTE: This recall applies
More informationFront Hub and Disc (4WD Model)
4C 8 DRIVE SHAFT SYSTEM Disassembled View Front Hub and Disc (4WD Model) 411RW001 Legend (1) Bolt (2) Cap (3) Snap Ring and Shim (4) Hub Flange (5) Lock Washer and Lock Screw (6) Hub Nut (7) Outer Bearing
More informationSecondary Boom Angle Sensor Calibration
_SN 130004 Information Date: July 29, 2013 Model Affected: Subject: Allowable Hours: Z-135/70 Secondary Boom Angle Sensor Calibration 60 minutes Issue: Genie has become aware of secondary boom angle sensor
More informationINSTALLATION MANUAL TOYOTA TUNDRA 5 SUSPENSION SYSTEM PART # 55905
PART NUMBER : 55905 1999 2003 TOYOTA TUNDRA 5 SUSPENSION SYSTEM PARTS LIST: Part # Description Qty. 55900-01 Driver Side Spindle 1 55900-02 Passenger Side Spindle 1 55905-03 Rear brake proportioning valve
More informationPage 1 of 10 SAFETY RECALL 98S37 Front Suspension Lower Control Arm Ball Joint Replacement - Certain 1990 through 1999 Ford Crown Victoria Police, Fleet, Taxi, Natural Gas Vehicles (NGV), and Lincoln Town
More informationSecondary Boom Angle Sensor Calibration
Safety Notice 130005 _SN 130004 Information Date: July 29, 2013 Model Affected: Subject: Allowable Hours: Z-135/70 Secondary Boom Angle Sensor Calibration 60 minutes ue Issue: Genie has become aware of
More informationPARTS MANUAL BALE KING V-RAKE VR810 GREEN AND YELLOW ITEM NUMBERS
PARTS MANUAL BALE KING V-RAKE VR810 GREEN AND YELLOW ITEM NUMBERS MANUFACTURED BY: BRIDGEVIEW MANUFACTURING INC. P.O. BOX 4 GERALD, SASK. CANADA S0A 1B0 PHONE: (306) 745-2711 FAX: (306) 745-3364 TABLE
More informationSUSPENSION - FRONT Toyota Celica DESCRIPTION ADJUSTMENTS & INSPECTION WHEEL ALIGNMENT SPECIFICATIONS & PROCEDURES WHEEL BEARING
SUSPENSION - FRONT 1988 Toyota Celica FRONT SUSPENSION Toyota DESCRIPTION Vehicles are equipped with front wheel drive and independent MacPherson strut front suspension. Suspension consists of vertically
More informationRITE WAY MFG. CO. LTD. P.O.
CO. LTD. P.O. Box 328 Imperial, Saskatchewan Canada, S0G 2J0 Ph: (306) 963-280 Fax: (306) 963-2660 Web Site: www.ritewaymfg.com E-mail: info@ritewaymfg.com Table of Contents SPECIFICATIONS... WARNING...2
More informationOVERVIEW: This bulletin involves replacing the front brake caliper guide pin bushings (WK) Jeep Grand Cherokee (WD) Dodge Durango
NUMBER: 05-002-15 GROUP: Brakes DATE: April 24, 2015 This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced, stored
More informationNORTHSTAR TRAILERS. Assembly Guide for SPORTSTAR I Trailer
NORTHSTAR TRAILERS Assembly Guide for SPORTSTAR I Trailer Congratulations! You are the proud owner of a NORTHSTAR trailer. Please follow the instructions and steps in this manual for proper assembly. We
More information2012 Expedition, Navigator Workshop Manual
Item Part Number Description 1 W720586 Differential housing cover bolt (12 required) 2 4033 Differential housing cover 3 Differential bearing cap bolts (part of 4010) (4 required) 4 Differential bearing
More information18. REAR WHEEL/SUSPENSION
18. REAR WHEEL/SUSPENSION SYSTEM COMPONENTS 182 REAR AXLE/BEARING HOLDER 187 SERVICE INFORMATION 183 REAR SHOCK ABSORBER 1816 TROUBLESHOOTING 186 SHOCK LINKAGE 1818 REAR WHEEL 187 SWINGARM 1820 181 SYSTEM
More informationLIFT Standard A-Arm Lift Kit Club Car Precedent Installation Instructions
LIFT-563 6 Standard A-Arm Lift Kit Club Car Precedent Installation Instructions Contents of LIFT-563 Club Car Precedent Lift Kit: a (1 ea.) Front Suspension b (1 ea.) Driver Side Upper A-Arm c (1 ea.)
More informationFRONT AXLE AND SUSPENSION FA 1
FRONT AXLE AND SUSPENSION FA1 FRONT AXLE AND SUSPENSION FA2 FRONT AXLE AND SUSPENSION Troubleshooting TROUBLESHOOTING Problem Possible cause Remedy Page Wanders/pulls Tires worn or improperly inflated
More informationIMPORTANT SAFETY RECALL
IMPORTANT SAFETY RECALL DEPARTMENT OF COMPLIANCE VEHICLE SAFETY AND RECALL MANAGEMENT BUILDING 11 423 N MAIN ST MIDDLEBURY, INDIANA 46540-9218 NHTSA RECALL: 18V475 CANADA RECALL: 2018-376
More informationTMC PAN 19 DISC BRAKE
TMC PAN 19 DISC BRAKE AXLE SERVICE MANUAL TMC DISC BRAKE AXLE TMC Australia Pty Ltd Telephone: + 61 3 8786 3688 78 Star Crescent Facsimile: + 61 3 8786 3699 Hallam E-Mail: info@tmcaus.com.au Victoria 3803
More informationOPERATORS MANUAL/INSTRUCTIONS/PARTS & SERVICE FOR MANUAL & ELECTRIC
OPERATORS MANUAL/INSTRUCTIONS/PARTS & SERVICE FOR MANUAL & ELECTRIC TABLE OF CONTENTS SAFETY DELIVERY INSPECTION OPERATION 4 MAINTENANCE 5 TROUBLE SHOOTING 5 PARTS 6-15 Frame Scissor Assembly 6-7 Thrust
More informationALL NISSAN, BRAKE NOISE/JUDDER/PEDAL FEEL DIAGNOSIS AND REPAIR
Classification: Reference: Date: BR00-004a NTB00-033a June 11, 2003 ALL NISSAN, BRAKE NOISE/JUDDER/PEDAL FEEL DIAGNOSIS AND REPAIR IMPORTANT: THIS BULLETIN HAS BEEN REVISED A note (*) was revised on page
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS --1075 North Ave. Sanger, CA 93657-3539 local: 559-875-0222 fax: 559-876-2259 toll free: 800-445-3767-- 2000 1984 1991 Toyota 2 Wheel Drive Pick-Ups 2 Front Dropped Spindles Congratulations!
More informationInstallation Instructions
Preparing your vehicle to install your brake system upgrade 1. Rack the vehicle. 2. If you don t have a rack, then you must take extra safety precautions. 3. Choose a firmly packed and level ground to
More information2012 General Motors. All rights reserved.
2001 Saturn L300/LW300 L100, L200,LW200, L300, LW300 VIN J Service Manual Document ID: 1551949 #99-00-91-002E: Steering Wheel Shake or Vibration at Highway Speeds (Balance Tire/Wheel Assemblies, Replace
More informationRead this entire manual before operation begins.
Read this entire manual before operation begins. Record below the following information which is located on the serial number data plate. Serial No. Model No. Date of Installation Contents Specifications.............
More informationSERVICE BULLETIN ATTN: PARTS AND SERVICE MANAGER. Mandatory Rework-Spindle Nut and Washer
SERVICE BULLETIN ATTN: PARTS AND SERVICE MANAGER DATE: October 18, 2013 NUMBER: 14-02 SUBJECT: Mandatory Rework-Spindle Nut and Washer UNITS AFFECTED: SITUATION: SOLUTION: Commercial 30 Model: ECKA30 Serial
More informationLIFT-506 BMF Lift Kit Club Car DS Gas & Electric Installation Instructions
LIFT-506 BMF Lift Kit Club Car DS Gas & Electric 2003.5-09 Installation Instructions Contents of LIFT-506 Club Car DS BMF Lift Kit: a (1 ea.) BMF Front Suspension b (1 ea.) Driver Side Upper A-Arm c (1
More informationOPERATOR S MANUAL REPAIR PARTS CATALOG. Models: SCP-51 & SCP-71 SCP-52 & SCP-72 SCP-91 & SCP-111 SCP-92 & SCP-112 BRILLION FARM EQUIPMENT
OPERATOR S MANUAL REPAIR PARTS CATALOG Subsoil Chisel Plow Models: SCP-51 & SCP-71 SCP-52 & SCP-72 SCP-91 & SCP-111 SCP-92 & SCP-112 IMPORTANT! Repairs cannot be purchased retail direct from factory. Order
More informationTABLE OF CONTENTS 0 FRONT DRIVE , WHEEL HUB , WHEEL HUB BEARING , KNUCKLE
Subsection 01 (TABLE OF CONTENTS) TABLE OF CONTENTS 0 FRONT DRIVE... 06-02-1 1, WHEEL HUB... 06-02-2 2, WHEEL HUB BEARING... 06-02-2, KNUCKLE... 06-02- FINAL DRIVE... 06-0-1 1, DRIVE CHAIN... 06-0-2 2,
More informationTITAN 13 x 2½ BRAKES DUO-SERVO AND FREE BACKING
INSTALLATION INSTRUCTION AND SERVICE MANUAL Actuator/Trailer Dealer - Please provide these instructions to the consumer. Consumer - Read and follow these instructions. Keep them with the trailer for future
More informationINSTALLATION MANUAL TOYOTA TACOMA 5 SUSPENSION SYSTEM PART # 54900
PART NUMBER : 54900 1996 2004 TOYOTA TACOMA 5 SUSPENSION SYSTEM PARTS LIST: Part # Description Qty. 55900-01 Driver Side Spindle 1 55900-02 Passenger Side Spindle 1 54900-01 Rear brake proportioning valve
More information888 SMITH SYSTEM USER S GUIDE WARNING: Read and follow all directions for each step to insure proper assembly of this product.
888 SMITH SYSTEM USER S GUIDE WARNING: Read and follow all directions for each step to insure proper assembly of this product. CLASS H PART # 733970 REV. B Version: 88809 Revision: 0/09/03 TABLE OF CONTENTS
More informationATTACHMENTS YAKIMA WA. Mainframe Assembly
3 3 3 39 31 ATTACHMENTS YAKIMA WA Mainframe Assembly 34 35 21 33 32 22 1 19 20 10 9 11 14 15 5 2 29 30 4 3 2 1 23 24 2 29 2 25 Mainframe Assembly ITEM QTY PART NO DESCRIPTION 1 1 TSP-2010 Mainframe Weldment
More informationMODEL 45 SCRAPER INDEX
MODEL 45 SCRAPER HOW TO ORDER PARTS: Be sure to state MODEL and SERIAL NO. of machine, PARTS NO., DESCRIPTION, and QUANTITY wanted. Unless this is done, we cannot provide prompt service or assure shipment
More informationDrive Axles SHAIS171. The Dana LMS Hub is available on the following Steer and Drive Axle Models:
Information Sheet Spicer Drive Axles SHAIS171 Topic: Dana LMS Hub Assembly Procedure Steer and Drive Axles Note: Bulletin ABIB-0302 replaces the original bulletin ABIB-9606. The Dana LMS hub design eliminates
More informationG5 Stainless Steel Brakes Owners Manual
G5 Stainless Steel Brakes Owners Manual Important: Read all of this Stainless Steel Disc Brake Manual before starting installation or removal of any part on the disc brakes. TIE DOWN ENGINEERING 255 Villanova
More informationASSEMBLY & OPERATION INSTRUCTION MANUAL
Sliding Bridge Jack 3,500 lbs. Capacity ASSEMBLY & OPERATION INSTRUCTION MANUAL TABLE OF CONTENTS Specifications... 2 Description & Features... 3 Installation Instructions... 4 Safety Instructions... 4
More informationFRONT DROP SPINDLES
92725000 88-98 2 FRONT DROP SPINDLES Thank you for choosing Rough Country for all your suspension needs. Rough Country recommends a certified technician install this system. In addition to these instructions,
More informationSERVICE BULLETIN DATE: October 29, 2004 Supersedes: S.B. 483AR6 dated 6/21/2004
NO: 483AR7 SERVICE BULLETIN DATE: October 29, 2004 Supersedes: S.B. 483AR6 dated 6/21/2004 LIMITED DISTRIBUTION SISU DIESEL LIMITED DISTRIBUTION PUMP MODELS AFFECTED: DB4629-5711 and DB4629-5712 SUBJECT:
More informationWheel Bearing (Serviceable Type) Inspection and Service
JOB SHEET 171 Wheel Bearing (Serviceable Type) Inspection and Service Name: Station: Date: NATEF Correlation This Job Sheet addresses the following NATEF task(s): 5.F.1 5.F.2 5.F.6 4.D.2 Diagnose wheel
More informationnissan patrol birfield kit
nissan patrol birfield kit 300795-kit 1987-1997 nissan patrol gr(y60) 1988-1994 ford maverick 1987-1997 nissan patrol gq 1987-1997 nissan patrol safari 1987-1997 nissan safari kit contents 5356 PINE AVE
More informationFRONT & 4 REAR GM WD LOWERING KIT
92725200 88-98 2 FRONT & 4 REAR GM 1500 2WD LOWERING KIT Thank you for choosing Rough Country for all your suspension needs. Rough Country recommends a certified technician install this system. In addition
More informationREMOVAL AND INSTALLATION
204-00-1 Suspension System 204-00-1 REMOVAL AND INSTALLATION Wheel Bearing, Hub, Knuckle, Upper Arm and Lower Arm Rear Special Tool(s) 3. Remove the parts in the order indicated in the following illustrations
More informationSECTION Front Drive Axle/Differential
205-03-i Front Drive Axle/Differential 205-03-i SECTION 205-03 Front Drive Axle/Differential CONTENTS PAGE Axle... 205-03-2 205-03-2 Front Drive Axle/Differential 205-03-2 Axle Special Tool(s) C-Frame
More informationPage 1 of 6 Axle Shaft, Hub, Oil Seal and Outer Wheel Bearing SPECIAL SERVICE TOOL(S) REQUIRED Description Tool Number Locknut Wrench T85T-4252-AH Removal 1. Set the parking brake and loosen the eight
More informationSpicer Axles & Brakes
Information Bulletin Bulletin Type: Parts / Service Information Spicer Axles & Brakes Topic: Dana Corporation Steer Knuckle Recall Identification and Repair Procedure Affected Models: Steer Axle Knuckle
More informationOwners Manual. Wheel Kaddy. Kage Innovation TM LLC 5302 Stagecoach Tr. Oak Park Heights, MN kageinnovation.
Owners Manual Wheel Kaddy Kage Innovation TM LLC 5302 Stagecoach Tr. Oak Park Heights, MN 55082 kageinnovation.com (844) 314 KAGE Kage Limited Warranty Kage Innovation will repair or, at the option of
More informationTechnical Service Bulletin
Technical Service Bulletin Page 1 of 8 SUBJECT: CONVERTIBLE TOP WEAR AND ADJUSTMENTS No: DATE: June, 2011 MODEL: 2007 11 Eclipse Spyder CIRCULATE TO: [ ] GENERAL MANAGER [ X ] PARTS MANAGER [ X ] TECHNICIAN
More informationHUB & WHEEL INSTALLATION
HUB & WHEEL INSTALLATION 1.0 SCOPE This specification covers the torque requirements for the attachment of all component parts of Spoke Wheels, Rims, Tyres and Hub assemblies. 1.1 Spoke Wheels CAUTION:
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTION AND SERVICE MANUAL Actuator/Trailer Dealer - Please provide these instructions to the consumer. Consumer - Read and follow these instructions. Keep them with the trailer for future
More informationIN-VEHICLE REPAIR. Differential Bearings. Rear Drive Axle/Differential Ford 7.5-Inch Ring Gear. Special Tool(s)
205-02A-1 IN-VEHICLE REPAIR Differential Bearings Special Tool(s) Protector, Drive Pinion Thread 205-460 Special Tool(s) Installer, Differential Shim 205-220 (T85L-4067-AH) 205-02A-1 2-Jaw Puller 205-D072
More informationRecall - Fuel Pump Inspection/Replacement TSB SB05-02-S002
Technical Service Bulletin # SB05-02-S002 Date: 051117 Recall - Fuel Pump Inspection/Replacement TSB SB05-02-S002 Fuel Pump Feed Port Regional Safety Recall Campaign 05V-466 ISSUE DATE: NOVEMBER 17, 2005
More informationSUBJECT: INTEGRATED FUEL SYSTEM (IFS) UNIT PUMP SERVICE
DATE: July 30, 2010 SERVICE BULLETIN SUPERSEDES: S.B. 560 dated November 22, 2008 NO: 560R1 SUBJECT: INTEGRATED FUEL SYSTEM (IFS) UNIT PUMP SERVICE RELATED PUBLICATIONS: IFS OPERATION AND INSTRUCTION MANUAL
More informationFront Wheel Bearing - New Replacement Procedures 55E230 APRIL Eagle Comanche Cherokee-Wagoneer 1987 Wrangler-YJ
1987 Jeep Truck Wrangler L4-150 2.5L VIN H TBI Copyright 2013, ALLDATA 10.52SS Page 1 Technical Service Bulletin # 55E230 Date: 870401 Front Wheel Bearing - New Replacement Procedures 55E230 APRIL 1987
More information