Part-number Description
|
|
|
- Estella Jordan
- 6 years ago
- Views:
Transcription
1 Part-number Description GQ16 Code of series The Front shape B Domed F Flat Round H High Round PF Super Flat Head + Flat PH Super Flat Head + High Flat Contact structure 10 1NO 01 1NC 1NC can be made to order for some products No letter means signal lamp Lamp type D Dot E Ring Connet type J Pin terminal L Long Pin Terminnal No letter means screw terminal Lamp color and colorized button R Red G Green Y Yellow O Orange B Blue W White N Black Lamp voltage AC/DC 6V AC/DC 12V AC/DC 24V AC/DC 36V Note: Other voltage can be made to order Crust material N Nickel-plated Brass S Stainless steel A PC Engineering plastic Cr Chrome-plated (made to order) Note: Pls read the catalogue carefully, and choose the right part-number according to the sign. Specifications Standard and Certification Operating Temperature Operating Humidity Contact Insulation Dielectric Strength Vibration Shock Solder Heat -25 ~+55 (no freezing) keep the air flowing around illuminated pushbutton 45~85%RH(no condensation) 50mΩ 1000MΩ 2000V,A C50Hz,5 seconds 50Hz,Amplitude mm >10g 320 (or 30W soldering iron) no more than 2 seconds) Standard EN :2002+A2:2008 EN :2004 Certification Mark Certificate Authority /Certification Number VOV/VT CTS/CTS E Operation Type Sign Diagram X Note: Using two terminals, double-break and slow-motion contact Y type NC switch can be made to order for individual product, pls check the product description. Y Lamp Ratings Voltage Current DroppingWay Lamp Circuit Diagram LED lamp(ac/dc) hours(reference) AC/DC6V,AC/DC12V,AC/DC24V,AC/DC36V About 15mA External resistance Using AC/DCLED lamp, the terminals have no difference of anode and cathode. R a b Note: DC LED and other voltage can be made to order. 06
2 Nickel plated Brass(N)/ 1.5 The Front Shape: High Round Nickel plated Brass(N)/ The Front Shape: Domed Nickel plated Brass(N)/ Contact Configuration: 1NO Nickel plated Brass(N)/ Contact Configuration: 1NO The Front Shape: High Round Nickel plated Brass(N)/ 17.5 Contact Configuration: 1NO The Front Shape: Domed Nickel plated Brass(N)/ GQ16F-10/ GQ16H-10/ GQ16B-10/ Nickel plated Brass / GQ16F-10/J/ GQ16H-10/J/ GQ16B-10/J/ Nickel plated Brass / Type Screw Type Pin (2 0.5mm) 07
3 Nickel plated Brass(N) 1.5 The Front Shape: High Round Nickel plated Brass(N) Nickel plated Brass(N) The Front Shape: High Round Nickel plated Brass(N) 17.5 GQ16 super flat anti-vandal metal push button installation method Φ18 +. Φ cut out diameter GQ16PF-10/ GQ16PH-10/ Stainless steel Nickel plated Brass GQ16PF-10/J/ GQ16PH-10/J/ Nickel plated Brass Nickel plated Brass Type Screw Type Pin (2 0.5mm) Swi tching 5~14Nm 08
4 For signal lamp,part number is:gq16f-d/j/ / / For signal lamp,part number is:gq16h-d/j/ / / 20 For signal lamp,part number is:gq16b-d/j/ / / 20 For signal lamp,part number is:gq16f-e/j/ / / For signal lamp,part number is:gq16h-e/j/ / / 20 For signal lamp,part number is:gq16b-e/j/ / / Type GQ16F-10D/J/ / / GQ16H-10D/ J/ / / GQ16B-10D/ J/ / / Pin (2 0.5mm) x(double-break slow-motion GQ16F-10E/J/ / / GQ16H-10E/ J/ / / GQ16B-10E/J/ / / VoltageUe CurrentIe Current- Limiting Configuration Tble Operating Voltage(U) Current -Limiting (R) dot illuminated/ring illuminated(led) AC/DC 1.8V 6V 270Ω,1/4W 220Ω,1/4W 15mA hours 12V 820Ω,1/2W 680Ω,1/2W AC/DC 2.8V 24V 36V 09
5 For signal lamp,part number is:gq16f-d/jl/ / / For signal lamp,part number is:gq16h-d/jl/ / / 25.5 For signal lamp,part number is:gq16b-d/jl/ / / 25.5 For signal lamp,part number is:gq16f-e/jl/ / / For signal lamp,part number is:gq16h-e/jl/ / / 25.5 For signal lamp,part number is:gq16b-e/jl/ / / Type GQ16F-10D/JL/ / / GQ16H-10D/JL/ / / GQ16B-10D/JL/ / / Pin (2 0.5mm) x(double-break slow-motion GQ16F-10E/JL/ / / GQ16H-10E/JL/ / / GQ16B-10E/JL/ / / VoltageUe CurrentIe Operating Voltage(U) Current -Limiting (R) 270Ω,1/4W 10 Current- Limiting Configuration Tble dot illuminated/ring illuminated(led) AC/DC 1.8V 6V 220Ω,1/4W 15mA hours 12V 820Ω,1/2W 680Ω,1/2W AC/DC 2.8V 24V 36V
6 If you need indicator, The model number is:gq16pf-d/j/ / / LED Color( ) : If you need indicator, The model number is:gq16ph-d/j/ / / 3 20 If you need indicator, The model number is:gq16pf-e/j/ / / If you need indicator, The model number is:gq16ph-e/j/ / / GQ16 super flat type install way: Φ18 +. Φ Hole diameter Type GQ16PF-10D/J/ / / GQ16PH-10D/J/ / / 11 Pin (2 0.5mm) x(double-break slow-motion GQ16PF-10E/J/ / / GQ16PH-10E/J/ / / StainlessSteel/Aluminiumalloy StainlessSteel/Aluminiumalloy VoltageUe CurrentIe Current- Limiting Configuration Tble Operating Voltage(U) Current -Limiting (R) dot illuminated/ring illuminated(led) AC/DC 1.8V 6V 270Ω,1/4W 220Ω,1/4W 15mA hours 12V 820Ω,1/2W 680Ω,1/2W AC/DC 2.8V 24V 36V
7 If you need indicator, The model number is:gq16pf-d/jl/ / / If you need indicator, The model number is:gq16ph-d/jl/ / / If you need indicator, The model number is:gq16pf-e/jl/ / / GQ16F-10E/ JL/ / / If you need indicator, The model number is:gq16ph-e/jl/ / / GQ16 super flat type install way: Φ18 Φ Hole diameter Type GQ16PF-10D/JL/ / / GQ16PH-10D/JL/ / / 06. m Pin (2 0.5mm) x(double-break slow-motion GQ16PF-10E/JL/ / / GQ16PH-10E/JL/ / / StainlessSteel/Aluminiumalloy StainlessSteel/Aluminiumalloy VoltageUe CurrentIe Current- Limiting Configuration Tble Operating Voltage(U) Current -Limiting (R) dot illuminated/ring illuminated(led) AC/DC 1.8V 6V 270Ω,1/4W 220Ω,1/4W 15mA hours 12V 820Ω,1/2W 680Ω,1/2W AC/DC 2.8V 24V 36V 12
8 Contact Configuration: 1NO (1NC can be made to order) The Front Shape: Domed The Crust Material( ):UV protection PC IP Degree: IP65,IK Contact Configuration: 1NO (1NC can be made to order) The Crust Material( ):UV protection PC IP Degree: IP65,IK Contact Configuration: 1NO (1NC can be made to order) The Front Shape: High Flat Round The Crust Material( ):UV protection PC IP Degree: IP65,IK Contact Configuration: 1NO : 1~3mm The Crust Material( ):Brass(Bronze-coloured) IP Degree: IP40,IK09 3 Max. 1 21Max. BottomView GQ16B-10/PC Stainless steel Brass(Bronze-coloured) GQ16F-10/PC UV protection PC GQ16M-10 Brass(Bronze-coloured) GQ16H-10/PC Type Screw Type Screw About 8N About 3mm 1mm 1~3mm 13
Part-number Description
Part-number Description GQ19 Code of series Product sturcture S Short type No letter means standard type The Front shape B Domed F Flat Round H High Round PF Super Flat Head+ Flat PH Super Flat Head+ High
Lamp type D Dot E Ring. Operation. Operation type. mode Z Latching type X Selector type Y Key-lock type TS Emergency stop. No letter means momentary
Part-number Description LAS1 ode of Series ode name GQ AGQ BGQ The Front shape H High Round PF Super flat head+ flat actuator PH Super flat head+ high actuator No letter here for selector switch, key lock
Farbe LED Color LED. Anschlusstyp Terminal Type. J: Lötanschluss ohne Buchstaben: Schraubklemmenanschluss
Order-Code: DIOH-GQ - / / / Δ / / / Δ Ø Einbaudurchmesser Mounting Hole 8mm 12mm 16mm 19mm 22mm Tastenform Front Shape F: Flach rund H: Erhöht rund C: Konkav B: Gewölbt F: Flat round H: High round C: Concave
总目录 GQ 系列金属信号灯 按钮开关 GQ 系列高强度微行程按钮开关 LAS2GQ 系列金属按钮开关 LAS1 系列 BGQ 型金属按钮开关 IP67. Ф19,22mm IP40,67. Ф16mm IP65,67. Ф19mm IP40,65,67.
总目录 GQ 系列金属信号灯 按钮开关 Ф8,1,16,19,mm IP40,65,67 GQ 系列高强度微行程按钮开关 Ф19,mm IP67 LASGQ 系列金属按钮开关 Ф16mm IP40,67 LAS1 系列 GQ 型金属按钮开关 Ф19mm IP65,67 LAS1 系列 AGQ 型金属按钮开关 Ф19,30mm IP40,65,67 LAS1 系列 BGQ 型金属按钮开关 Ф19,,5,30mm
Farbe LED Color LED. Anschlusstyp Terminal Type. J: Lötanschluss ohne Buchstaben: Schraubklemmenanschluss
Order-Code: DIOH-GQ - / / / Δ / / / Δ Ø Einbaudurchmesser Mounting Hole 8mm 12mm 16mm 19mm 22mm Tastenform Front Shape F: Flach rund H: Erhöht rund C: Konkav B: Gewölbt F: Flat round H: High round C: Concave
Miniature Stainless Steel Vandal Resistant
Miniature Vandal Resistant Prominent Button / Flush Profile Prominent and Flush Profile 2A, 36 dc (Front of Panel Only) Specification /3 /1 Operating Temp Range: 0.6Nm 0.6Nm PA Copper, Gold Plated PA Copper,
Series AV. Pushbutton Switches NUT O-RING HOW TO ORDER
Pushbutton Switches SPECIFICATIS: BUSHING: 22mm. CTACT RATING: 2A @ 48VDC or 125VAC. ELECTRICAL LIFE: 10,000cycles at full load. CTACT RESISTANCE: 10m-ohms max. initial @2-4VDC. INSULATI RESISTANCE: 1,000M-ohms
9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
AV series Anti-vandal and security pushbutton switches
Anti-vandal and security pushbutton switches Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism
Two case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.
Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact
Momentary pushbutton switches - round plunger
1200 series Momentary pushbutton switches - round plunger Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max.
AV SERIES PUSHBUTTON SWITCHES Distinctive features
PUSHBUTTON SWITCHES Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism protected against crushing
RoHS. Specifications. Part Number Configurator
Applications / Markets Audio / Visual Security Devices Industrial Controls Specifications Electrical Rating: 2A, 48VDC Electrical Life: 50,000 Cycles Contact Resistance: 50mΩ Max. Insulation Resistance:
Sealed pushbutton switches - bushing Ø 16 mm - momentary
Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families
SWITCHES. Other switch types include conventional, push-button and toggle switches.
Switches Manufactured from Stainless Steel, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile
Series. Robust and attractive.
Series 82 Robust and attractive. www.eao.com Series 82 Robust and attractive. With Series 82, EAO offers the optimal pushbutton for vandal-resistant, stylish HMI controls used in harsh industrial environments,
Parsic Italia Contatti Oper. Type. Led Lamp Type
HBGQ16 Pushbuttons Switch Series mounting hole : Φ 16 Order Code - Configurazione di un modello Configura un pulsante o un interruttore facendo uso della seguente simbologia : Fronte Front Shape Y : round
IP series. Pushbutton switches for harsh environments bushing Ø 12 mm momentary DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS
SW-IPMOM-1709 DISTINCTIVE FEATURES Illuminated or non-illuminated Tactile feedback Wide variety of configurations Flat round actuator for optional marking Sealed to IP67 and IP69K ENVIRONMENTAL SPECIFICATIONS
CIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
Miniature Switches & Pilot Devices
A8 Series Miniature Switches and Pilot Devices: 8mm Key features of the 21/64" (8mm) A8 series Switches and Pilot Devices include: 21/64" (8mm) round mounting hole Compact Design Saves Space Bright and
ELECTRICAL SPECIFICATIONS
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
Bright illumination face and snap-action switching.
ø A2 Series ø10 A1 Series ø8 A8 Series A2 Series A1 Series A8 Series Bright illumination face and snap-action switching. See website for details on approvals and standards. Hole Size Model Function Degree
Anti vandal switch.
Anti vandal switch www.langir.com Anti-vandal series comparison Cutout Diameter / Depth Functions available type Actuator options Dot illumination Ano diz e d Stainless s Gold plated brass Nickel plated
18mm bezel diameter 16mm panel hole S.P. Push to make Polished finish 2A, 48V d.c.
Stainless Steel Momentary FLUSH PROFILE MP0042/1 DOMED PROFILE MP0042/2 MP0042/3 Specification MP0042/1 MP0042/2 MP0042/3 Terminations: Screw Terminals Screw Terminals Screw Terminals Switching: S.P. Push
IQ series Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting
Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting Distinctive features Like the IR series, the IQ series is a range of sealed pushbutton switches with dia. 16 mm bushing. But IQ pushbuttons
Momentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.
Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold
UP Series Miniature Pilot Lights
Available in Various Sizes Five illumination colors: amber, green, red, white, yellow Various sizes and design. Available with a built-in current limiting resistor. Waterproof () types available for and.
IR series Sealed pushbutton switches - bushing Ø 16 mm - momentary
Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families
Selection guide - Section B1 «I» range
Selection guide - Section «I» range New! New! New! New! New! New! Series IC IL IM IP IB-IS IHS IHL IQ mom. & latching hall effect hall effect momentary Page -2-6 -11-15 -25-29 -32-35 Poles 1 1 1 1 1 1
IL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Distinctive features and specifications Momentary pushbuttons for thick panels Illuminated or non-illuminated Tactile feedback Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS
Security Switches. Anti Vandal, Pushbutton. Specifications. Specifications S76 S77. Features.748 (19mm) bushing diameter
Anti Vandal, Pushbutton S76.287 (7.3) c: Screw (Assembled).098 (2.5) Typ.142 (3.6) Type Circuitry Action Actuator g 54 377 SPST NO OFF (ON) Stainless Steel, Flat S76b 54 378 SPST NO OFF (ON) Stainless
ELECTRO-MECHANICAL MINIATURE SEALED. Long life Solder or PC terminals PanelsealedtoIP67
PUSHBUTTON SWITCHES ELECTRO-MECHANICAL MINIATURE SEALED SERIES 48EM: ACTUAL SIZE FLEX-TECH MINIATURE SEALED PUSHBUTTON SWITCHES This rugged multi-option sealed pushbutton series offers the utmost in choices
ø8 A8 Series Miniature Control Units
A8 ø8 A8 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals
Kiosks. Body Finish Options. Actuator. Lens Color Options. Rating Options. Anodized 48VDC. 1 - Black Anodized. 7 - Blue 8 - Green 9 - Red.
Applications / Markets Audio / Visual Security Devices Industrial Controls Specifications Electrical Rating: 2A, 8VDC Mechanical Life: 200,000 Cycles Electrical Life: 50,000 Cycles Contact Resistance:
Distinctive Characteristics
Distinctive Characteristics Full face and spot illumination available. Front panel relamping. Choice of super bright LEDs in white, green, and blue in addition to bright red, amber, and green LEDs. Compact
8000 series Momentary or alternate action pushbutton switches
Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A
IP series Latching action pushbutton switches for harsh environments
Latching action pushbutton switches for harsh environments Distinctive features and specifications Latching action Actuator remains in the low position when ON. Illuminated and non-illuminated Compact
LUMOTAST 25 selector switch 1-28 LUMOTAST 25 selector switch, Click quick-assembly feature 1-29 LUMOTAST 25 selector switch, ring nut fixing 1-29
General data TAST pushbutton range Illuminable pushbuttons and signal lamps. Please order lamps/leds separately. Mounting hole diameter: 6.2 mm 42 V/00 ma max. Water-jet proof IP65 Low profile Lamp socket
XA Series Emergency Stop Switches (w/removable Contact Block)
XA ø6 XA Series Emergency Stop Switches (w/removable Contact Block) The World s First ø6 mm, 4-contact Emergency Stop Switch. Compact size - only 7.9 mm deep behind the panel. Reliable Safe break action.
1200 series. Momentary pushbutton switches - round plunger. Distinctive features and specifications. Butt action contacts, double break
Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts
IR series. Sealed pushbutton switches bushing Ø 16 mm momentary standard version DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS
SW-IRMOM-1801 DISTINCTIVE FEATURES Screw version up to A Tactile feedback Sealed to IP6 Illuminated or non-illuminated Flat round actuator for optional marking ENVIRONMENTAL SPECIFICATIONS Front panel
ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
ø10 A1 Series Miniature Control Units
A1 ø10 A1 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals
18000 series Snap-action momentary pushbutton switches
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
We Make It Easy! 3. All of our switches are shipped complete, just as ordered. No incomplete or partial deliveries of subcomponents and accessories
We Make It Easy! 1. We assemble the parts for you saves you time and money. Includes LEDs and accessories 2. Easy to order all options and accessories displayed in easy-to-follow ordering table. No complicated
LUMOTAST FK. General data. Content
General data TAST illuminated pushbutton range Illuminable pushbuttons and signal lamps with lamp socket T /T / 4. Please order lamps / LEDs separately. Mounting hole diameter 6.2 mm 42 V/00 ma max. Water-jet
Pushbutton and key switches
Pushbutton and key switches Section ZP Tiny, metal bushing, momentary 3 SMT TP Tiny, SMT, washable, momentary 5 TP Tiny, washable, momentary 7 9100-9200-9500 Subminiature, momentary 13 IF Miniature, sealed,
L1 = Solder terminal 2.8 x 0.5 mm Ø Behind panel
Raised design Emergency-stop switch, foolproof EN IEC 60947-5-5, IP 65 Equipment consisting of (schematic overview) L1 35.6 6 max. 59.5 41 18x24 Actuator Product can differ from the current configuration.
Common features. Installation options. Aesthetic options
New! LPI series Distinctive features and applications UG1006-A Common features Large ergonomic actuator (Ø 35 mm) Tactile feedback Low behind-panel depth (21 mm max.) Stylish design Long life This series
XW Series Emergency Stop Switches
ø ø mm, 4-contact Emergency Stop Switch. Compact size only 37. mm deep behind the panel (screw terminal type 4 mm with terminal cover). eliable Safe break action. The depth behind the panel is only 37.
ø12 A2 Series Miniature Control Units
ø2 A2 Series Miniature Control Short 22-mm-long body miniature control unit series with bright LED illumination face and snap-action switching. Degree of protection: IP40 and IP5 (IEC 0529) All series
Pilot Devices, Compact Range
Pilot Devices, Compact Range The competitive choice The compact range is a new competitive choice for OEM customers and Panel Builders with high requirements of cost ef cient, easy to use and reliable
Distinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Short Body Pushbuttons Series YB Choice of super bright LEDs in white,
RU Series Universal Relays
Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator available on plug-in relays No internal
Switches. Introduction
Introduction Switches Manufactured from, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile
8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS
SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30
13000 series Professional quick-break momentary pushbutton switches
Distinctive features and specifications PC and panel mount models ushing Ø 6,35 (1/4) and 11,9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : -
AP/UP Series Miniature Pilot Lights UZ Series Miniature Buzzer
AP/UP Series Miniature Pilot Lights UZ Series Miniature Buzzer Pilot Lights / Buzzer Selection Guide Series AP Series Miniature Pilot Lights AP6S Series Miniature Pilot Lights Mounting Hole Size ø6 ø2
APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator
APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator Distinctive features and applications Common features Large
General Specifications
General Specifications Electrical Capacity (Resistive oad) Power evel (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C ogic evel (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA ~ 0.1A
Rocker Switches & Twin R13. Miniature rocker switch. Ultra thin rocker switch. Ratings up to 10A, 250Vac. High inrush tolerance
Rocker Switches Ultra thin rocker switch Ratings up to 15A, 250Vac Single and twin gang single: 17.4 x 6.8mm twin: 17.4 x 13.4mm Miniature rocker switch Ratings up to 15A, 250Vac High in-rush tolerance
Pushbutton Switches Sub-Miniature
Pushbutton Switches Specifications: Contact rating Mechanical life Maximum contact resistance Minimum insulation resistance Dielectric strength Operating temperature Materials: Case Plunger Bushing Housing
IP series. Pushbutton switches for harsh environments bushing Ø 12 mm latching DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS
SW-IPLATCH-802 DISTINCTIVE FEATURES Latching action Illuminated or non-illuminated Compact Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS Front panel sealing : IP67
HMI Components. Series. LED-Indicator. Machinery and Automation Panel building Laboratory and measuring equipment. Raised design
Edition 07 / 2016 HMI Components 17 Series Characteristics The Series 17 indicator range comprises 6 mm to 22.5 mm components which are especially suited for: Raised design The large variety of front designs
Distinctive Characteristics
Distinctive Characteristics Various cap styles and colors to meet differing application needs. Bright, full face illumination to distinctively indicate status. Rear panel threaded mounting or snap-in mounter
Switches. Introduction
Introduction Switches Manufactured from, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile
Sealed to IP67 Dia. 12 mm or 16 mm bushing Momentary or latching Illuminated or non-illuminated Custom options Comprehensive range
I range Sealed pushbutton switches Sealed to IP67 Dia. 12 mm or 16 mm bushing Momentary or latching Illuminated or non-illuminated Custom options Comprehensive range I range Sealed pushbutton switches
HMI Components. Series. Indicator Illuminated pushbutton Mushroom-head pushbutton Key lock switch
Edition 10/2016 HMI Components Series Characteristics The compact Series is especially suited for: Flush design The large rectangular design (24x36mm) features a large illuminated area. Functions The Series
General_technical_data Series
Indicator actuator 2 500 Hz: 5 g Pushbutton actuator Lens flat/level with front bezel: - Momentary max. 3 600/h - Maintain max. 1 800/h Lens flat/raised above front ring: - Momentary max. 3 600/h - Maintain
Lighted PushButton Switch
Lighted PushButton Switch Cylindrical 8mm dia. Subminiature Series Featuring Short Mounting Depth Round, square and rectangular LED pushbutton units. types also available. Requires only 18mm mounting depth.
3 CE-Conformity. General information. Signal lamps. 3-2 Signal lamps
Signal lamps General information Signal Lamps with integral lamps/s The soldered lamps/s without base cannot be replaced. Signal Lamps with lamp socket An integral lamp socket allows replacement of lamps/s
General_technical_data Series
Actuator with snap-action switching element Switching system Self-cleaning, double-break snap-action switching system with contact opening width 2 x 0.5 mm (switch with small contact opening width as per
Thermal Overcurrent Circuit Breaker 3130
Thermal Overcurrent Circuit Breaker 330 Description Single, two and three pole rocker switch/thermal trip free circuit breakers (S-type TO CBE to EN 60934) of compact design for snap-in panel mounting.
Distinctive Characteristics
Distinctive Characteristics Carefully designed light diffusion and filtering system produce bright, full surface illumination with front panel relamping. Spot illumination available in single and bicolor
Pushbutton switches & indicators. Panel Sealed to IP65. Push on tab terminals 6A 250VAC AGENCY APPROVALS
Distinctive features and specifications A01_AX1607US Panel Sealed to IP65 Single pole to four pole changeover Custom engraving or film legends options Push on tab terminals 6A 250VAC PANEL CUT OUT ELECTRICAL
General Specifications
General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA
Contact blocks and lamp blocks with holder for front mounting Max. number of blocks Included in holder blocks Catalog No. Ref.
Pilot Devices Accessories Contact blocks and lamp blocks with holder for front mounting Max. number of blocks Included in holder blocks Catalog No. Ref. Code List Price For non-illuminated operators 3
EXCEL CELL ELECTRONIC CO., LTD. NO. A S P E C I F I C A T I O N Edition 2 Page 1
S P E C I F I C A T I O N Edition 2 Page 1 ECS - INDUSTRIAL CONTROL SWITCH SELECTOR 1. FEATURES Up to 5 different operations. Detachable contact block for easy installation and removal. It can meet variety
CONTROL UNITS. Features. Specifications
Features Precise and sophisticated design, user-friendly into application. Workable stacking contact block, easy to install and disassembly. Smart mounting ring design, can connect Φ22mm switchable to
Pushbutton switches & indicators. Panel Sealed to IP65. Push on tab terminals 6A 250VAC AGENCY APPROVALS
Distinctive features and specifications Panel Sealed to IP65 Single pole to four pole changeover Custom engraving or film legends options Push on tab terminals 6A 250VAC A01_AX1607USR1 ELECTRICAL SPECIFICATIONS
Correction Reissue. Product Discontinuation Notices. Discontinuation Notice of Cylindrical Proximity Sensor Model E2E series.
PRODUCT NEWS Correction Reissue Product Discontinuation Notices Proximity Sensors Issue Date August 4, 2014 No. 2014038CE(3) Discontinuation Notice of Cylindrical Proximity Sensor Model E2E series.
AM1 (NZ BASIC) SWITCHES
HIGH CONTACT CAPACITY, PRECISE OPERATION AM1 (NZ BASIC) SWITCHES 24.1 FEATURES 15 A High current switching capacity and high precision Wide allowance of operating speed Versatile variety of actuators UL/CSA
Oiltight Switches & Pilot Devices
Oiltight Emergency Stop Stations Part Numbers: Emergency Stop Stations Description Contacts Plastic Bezel Metal Bezel Ø 40mm Pushlock Turn Reset 1NO-1NC HW1X-BV411-R* HW4X-BV411-R* 2NC HW1X-BV402-R* HW4X-BV402-R*
Signaling Lights LD6A. LD6A LED SignaLight Towers Assembled Products. Unique Striped Design Improves Visibility
Unique Striped Design Improves Visibility Key features of the LD6A LED SignaLight Towers include: The striped design with non-illuminated area between the lenses makes the illuminated color very visible.
Distinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and
ACME SCREW LINEAR ACTUATOR. OVERALL DIMENSIONS La =Lc + Stroke Lc T Capacitor
ACME SCREW LINEAR ACTUATOR ATL 10 AC motor Stroke OVERALL DIMENSIONS La =Lc + Stroke Lc T Capacitor Rear bracket SP Pin Standard head with threaded hollow bore 80 BA depth 17 Stroke end reed switches FCM
Distinctive Characteristics
Distinctive Characteristics Wide selection of illumination effects is achieved with single and bicolor, - or -element LEDs, in flat, beveled, or sculptured caps. LED colors include red, amber, green, white,
502 VALVE WITH UM ELECTRIC ACTUATOR
502 VALVE WITH UM ELECTRIC ACTUATOR CHARACTERISTICS The 502+UM is a 2-way brass ball valve dedicated to the automatic shut-off of non-corrosive common fluids: water, air, hydrocarbons, etc. It is a full
22mm XW E-Stops. UL File #E68961 CCC No Specifications
XW Series 22mm XW E-Stops Key features: The depth behind the panel is only 48.7 mm for 1 to 4 contacts (with terminal cover) for illuminated and non-illuminated units. IDEC s original Safe break action
LED Annunciator Lights. KFE-HD Series
LED Annunciator Lights KFE-HD Series KFE-24HD KFE-11HD KFE-13HD Features A variety of lighting areas, ranging from 8 34mm to 18 42mm are available. Five vivid lighting colors are available: milky white,
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
VALVES WITH UM ELECTRIC ACTUATOR
505-507 VALVES WITH UM ELECTRIC ACTUATOR CHARACTERISTICS The 505+UM and 507+UM cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
VALVES WITH UV ELECTRIC ACTUATOR
505-507 VALVES WITH UV ELECTRIC ACTUATOR CHARACTERISTICS The 505+UV and 507+UV cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
55 Series - Miniature General Purpose Relays 5-10 A
Series - Miniature General Purpose Relays -0 A - Plug-in or P.C.B. versions - AC or DC coils - Lockable test button and mechanical flag indicator as standard on and CO relays types - Sockets and accessories:
C & S 22 mm NON-ILLUMINATED PUSHBUTTONS METAL BEZEL
C & S 22 mm NON-ILLUMINATED PUSHBUTTONS METAL BEZEL OPERATING HEADS, - IP65 CONTROL UNITS WITH CHROMIUM PLATED METAL BEZEL PROJECTING PUSH BUTTON BOOTED PUSH BUTTON IP66 WITH TRANSPARENT BOOT IP66 MUSHROOM
ø22mm HW Series Control Units Control Units
mm HW Series Control Units Control Units HW Series Control Units (Selection Guide) Function Emergency Stop Switch (Unibody Type) Emergency Stop Switch (Separate Type) Pushlock Turn eset Category ø40mm
Thermal-Magnetic Circuit Breaker M1-...
Thermal-Magnetic Circuit Breaker 320-...-M-... Description Two pole rocker switch/thermal-magnetic circuit breaker with trip-free mechanism (S-type TM CBE to EN 6034). The addition of a magnetic tripping
CONTENTS PRODUCT DESCRIPTION Functional Description: NO Switch Functional Description: Illumination...
Product Manual PSE NO Switch CONTENTS CONTENTS... 1 1 PRODUCT DESCRIPTION... 3 1.1 Functional Description: NO Switch... 3 1.2 Functional Description: Illumination... 4 2 TECHNICAL DATA AND DIMENSIONAL
502 VALVE WITH UM1.5 ELECTRIC ACTUATOR. Model/Ref:
Model/Ref: 270090022000 www.lauridsenindustri.com CHARACTERISTICS The 502+UM1.5 is a 2-way brass ball valve dedicated to the automatic shut-off of non-corrosive common fluids: water, air, hydrocarbons,
YB2 Panel Seal. New Square Actuator Option. Series YB2. Contact No Thin Flush Mount Pushbuttons. 24mm Square Panel Seal Pushbuttons
Contact No. 182 YB2 Panel eal Thin Flush Mount Pushbuttons New quare Actuator Option 2011-01-26 www.nkk.com 1 General pecifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V