NF Circuit Breaker Panelboards

Transcription

1 Catalog 670CT Class 670 COTET Description Page tandards and Ratings Main Circuit Breakers Branch Circuit Breakers (Bolt-on) Interiors eutrals Ground Bar Kits urge Protection Enclosures ingle Row (Column-Width) Panelboards Terminal Data Typical Wiring Diagrams

2

3 tandards and Ratings F Circuit Breaker Panelboards tandards and Ratings Voltage ystem ystem Diagram F circuit breaker panelboards are for use on ac systems. They are UL Listed under File E3339 and marked culus. F circuit breaker panelboards accept EDB, EGB, and EJB branch circuit breakers. 20/240 Vac φ3w tandards 208Y/20 Vac 3φ4W 3φ4W 240/20 Vac Delta 3φ3W 240 Vac Delta 3φ3W 240 Vac Grounded Bφ Delta F circuit breaker panelboards are designed, manufactured, and tested to comply with the following standards: UL 67 tandard for Panelboards UL 50 Enclosures for Electrical Equipment UL Listed Class CTL panelboard CA C22.2, o. 29-M989 Panelboards and Enclosed Panelboards CA C22.2, o. 94-M9 pecial Purpose Enclosures EMA PB Panelboards FPA 70 ational Electrical Code (EC ) Federal pecification W-P-5C Type I Class Circuit Breaker Panelboards 2003 IBC, FPA 5000, ACE/E7 eismic Qualification 480Y/277 Vac 3φ4W 600Y/347 Vac 3φ4W Ratings Main lugs: A Main circuit breaker: A 3

4 Main Circuit Breakers Main Circuit Breakers 25 A maximum field-installable EDB, EGB, or EJB (0 A max at 600Y/347 Vac) 00 A maximum field-installable FI 25 A maximum field-installable HDL, HGL, HJL, or HLL 250 A maximum field-installable JDL, JGL, JJL, or JLL 400 A maximum field-installable LAL or LHL 400 A or 600 A maximum factory-installed LCL or LIL (LCL is 480Y/277 Vac maximum) HDL Factory-Installed Circuit Breaker Accessories FIL, HDL, HGL, HJL, HLL, JDL, JGL, JJL, JLL, and KIL circuit breakers are available with shunt trip, ground fault shunt trip, undervoltage trip, time delay, auxiliary switches, and alarm switches. Table : Main Circuit Breaker Adapter Kits (Circuit Breaker ot Included) Adapter Kit Catalog umber Ampere Rating Main Circuit Breaker JDL 00MFI A FIL 50MH A 3 HDL, HGL, HJL, HLL 250MJ A JDL, JGL, JJL, JLL 250MKC A KIL 400M A LAL, LHL Main circuit breakers are not included in the adapter kits. Order them separately. 2 For single phase applications of HDL and HGL, select a 3-pole main circuit breaker. For single-phase applications of HJL and HLL, select a 2-pole main circuit breaker. 3 RTI kit accepts maximum 25 A H-frame circuit breaker. OTE: ee Main Circuit Breaker Terminal Data on page 8. Field-Installable Circuit Breaker Accessories Field-installable undervoltage release, alarm switch, shunt trip, and auxiliary contacts are available for LAL, LHL, LCL, and LIL 400 A main circuit breaker interiors. OTE: ee upplemental Digest for additional accessories. LAL 250MJ Main Circuit Breaker Kit 400M Main Circuit Breaker Kit 4

5 Branch Circuit Breakers (Bolt-on) Branch Circuit Breakers (Bolt-on) Table 2: tandard Branches, 600Y/347 Vac Maximum Branch Availability hort Circuit Current Rating Prefix -Pole 2-Pole 3-Pole at 480Y/277 Vac at 600Y/347 Vac 2 EDB 5-70 A 5-25 A A 2 8,000 A 4,000 A EGB 5-70 A 5-25 A A 2 35,000 A 8,000 A EJB 5-70 A 5-25 A A 2 65,000 A 25,000 A eries ratings are also available. In Canada: ee eries Rating Guide (Data Bulletin #600PD0302EP). In UA: ee witchboard/panelboard hort Circuit Current Ratings (Data Bulletin #2700DB990) or the Digest. 600Y/347 Vac is 0 A maximum. Table 3: EPD Branches 30 ma Ground Fault Equipment Protection Devices, 277 Vac Maximum 2 Branch Prefix Availability -Pole EPD branches are single-pole only, and require two pole spaces in the panelboard. Also available with series ratings. hort Circuit Current Rating 2 at 277 Vac EDB-EPD 5-70A 8,000 A EGB-EPD 5-70A 35,000 A EJB-EPD 5-70A 65,000 A Table 4: tandard and EPD Branches Terminal Lug Data Branch Circuit Breaker Prefix EDB, EGB, EJB, EDB-EPD, EGB-EPD, EJB-EPD Wire ize Ampere Rating Aluminum Copper 5-30 A #2 - #6 #4 - # A #2-2/0 #4 2/0 EDB Branch Circuit Breakers 5

6 Interiors Interiors Main Lug Interiors 250 A Maximum Main Lugs Interior (Deadfronts Installed) Will accept bolt-on branch circuit breakers Top or bottom feed 65,000 A hort Circuit Current Rating (CCR) maximum branch circuit breakers at 480Y/277 Vac 25,000 A CCR maximum branch circuit breakers at 600Y/347 Vac eries rated to 200,000 A CCR maximum when supplied by remote I-Limiter circuit breaker at 480Y/277 Vac eries rated to 65,000 A CCR maximum when supplied by remote I-Limiter circuit breaker at 600Y/347 Vac 25 A and 250 A interiors are suitable for use as culus service entrance with back-fed EDB, EGB, or EJB circuit breakers Factory-installed main lugs on all interiors A main lug interiors are convertible to main circuit breaker interiors by adding a main circuit breaker adapter kit and a main circuit breaker everal bus options: ilver-plated copper or tin-plated aluminum bus (aluminum is standard) Tin-plated copper bus is available as an option 600 A and 800 A only available with copper Branch connector fingers are tin-plated copper ilver-plated branch connector fingers are optional Line lugs are suitable for 75 o C copper or aluminum wire Factory-Installed Options for Main Lugs and Main Breaker Interiors ub-feed Lugs (on the Main) OTE: Only available on φ or 3φ, A main lug interiors Feed-Through Lugs OTE: Available on φ or 3φ, A main lug or A main circuit breaker interiors ub-feed Circuit Breakers OTE: Available on φ or 3φ, A main lug or A main circuit breaker interiors One sub-feed HDL, HGL, HJL, HLL, JDL, JGL, JJL, or JLL circuit breaker per 250 A panelboard Two sub-feed HDL, HGL, HJL, HLL, JDL, JGL, JJL, or JLL circuit breakers per 400 A panelboard One sub-feed LA, LH, LC, or LI circuit breaker (400 A maximum) and one HDL, HGL, HJL, HLL, JDL, JGL, JJL, or JLL circuit breaker, or two sub-feed HDL, HGL, HJL, HLL, JDL, JGL, JJL, or JLL circuit breakers per 600 A or 800 A panelboard OTE: LC/LI circuit breakers cannot be combined with JJL or JLL circuit breakers plit bus Lighting contactors Compression lugs 6

7 Interiors Main Circuit Breaker Interiors 400 A LAL Main Circuit Breaker Interior Will accept bolt-on branch circuit breakers uitable for use as UL service entrance (statement found on wiring label on back of deadfront); meets local electrical codes (CA type service entrance available factory-assembled) Top or bottom feed 65 k AIR maximum branch circuit breakers at 480Y/277 Vac 25 K AIR maximum branch circuit breakers at 600Y/347 Vac eries rated to 200 k AIR maximum when supplied by remote I-Limiter circuit breaker at 480Y/277 Vac eries rated to 65 k AIR maximum when supplied by remote I-Limiter circuit breaker at 600Y/347 Vac Available with silver-plated copper or tin-plated aluminum bus (aluminum is standard). Tin-plated copper bus is available as an option; 600 A only available with copper Branch connector fingers are tin-plated copper; silver-plated branch connector fingers are optional 25 A at 480Y/277 Vac (0 A at 600Y/347 Vac) main circuit breaker interiors contain back-fed EDB, EGB, or EJB main circuit breakers A main circuit breaker panelboards consist of: tandard main lug interiors Main circuit breaker adapter kit (50MH, 00MFI, 250MKC, 250MJ) Appropriate FIL, HDL, HGL, HJL, HLL, JDL, JGL, JJL, JLL, or KIL circuit breakers Line lugs are suitable for 75 o C copper or aluminum wire 400 A main circuit breaker panelboard consists of: tandard main lug interior Main circuit breaker adapter kit (400M) Appropriate LAL or LHL circuit breaker Factory-installed LCL or LIL main circuit breaker with 8 in. (203 mm) deep enclosure (Type only) 600 A main circuit breaker panelboard: Factory-assembled only Use LCL, LIL main circuit breakers 8.75 in. (223 mm) deep enclosure (Type only) 400 A Main Lugs Interior 400 A LAL Main Circuit Breaker and Adapter Kit 400 A Main Lugs Interior with 400 A Main Circuit Breaker and Adapter Kit 7

8 Interiors Field-Installable Options Feed-Through Lug Kits F25FTL, F250FTL, F400FTL available for A, φ or 3φ interiors ub-feed Circuit Breaker Kits F250FBH allows a single sub-feed HDL, HGL, HJL, or HLL circuit breaker on 250 A interiors F250FBJ allows a single sub-feed JDL, JGL, JJL, or JLL circuit breaker on 250 A interiors F600FBH allows twin sub-feed HDL, HGL, HJL OR HLL circuit breaker on 400 A main lug or main circuit breaker interiors and 600A main lug interiors 600FBJ allows twin sub-feed JDL, JGL, JJL, or JLL circuit breakers on 400 A main lug or main circuit breaker interiors and 600 A main lug interiors ub-feed Lug Kits Amperes Catalog umber 25 A F25FL 250 A F250FL 400 A F400FL 200% eutral Kits Amperes Catalog umber 00 A FL 25 A FL 250 A FL2 400 A FL4 400 A Main Lug Interior with ub-feed Lugs 200% neutrals not available with FTL, FL, or FB. Copper 00% Kits Copper 00% Amperes Copper eutral Kits Catalog umber 400 A ub-feed Main Lug Kits 25 A FCU 250 A F2CU 400 A F6CU 600 A F6CU ot to be used with FL, FTL, or FB. These combinations are factory-assembled only. Compression Lugs Compression lugs are available for A main lug interiors and A main circuit breaker interiors. Compression Lugs 8

9 eutrals eutrals eutral Assembly All lugs are suitable for copper or aluminum wire A interiors have a split neutral located on the same end as the mains A interior neutrals can be located on either end depending on the configuration eutral may be bonded for use as a UL service entrance Branch terminals are suitable for #4-2/0 copper or aluminum and #4-#6 copper or aluminum Provisions for larger branch terminal lug kits are available as options uitable lug provided on neutrals for termination of the grounding conductor All unused neutral terminals may be used to terminate equipment grounding conductors when the panelboard is used as UL service equipment 00% rated neutrals are standard; one neutral termination provided per circuit in the panelboard 200% rated neutrals are optional see, 200% eutral Kits below eutral Bonding Provisions The bonding strap may be field installed for UL service equipment requirements on A interiors. ot applicable for CA service entrance panels in Canada. Table 5: Copper 00% eutral Kits for Use with ingle or Three Phase A Interiors Amperage 25 A 250 A 400 A 600 A 800 A A eutral Bonding Provisions Catalog umber FCU F2CU F6CU F6CU ot to be used with FL, FTL or FB. These combinations are factory-assembled only. Kit not available, Factory-assembled only 200% eutral Kits Table 6: 200% eutral Kits for Use with ingle or Three Phase A Interiors Amperage 25 A 250 A 400 A 600 A 800 A Catalog umber FL FL2 FL4 ot to be used with FL, FTL or FB. These combinations are factory-assembled only. Kit not available, Factory-assembled only FL2 9

10 Ground Bar Kits Ground Bar Kits Field installable in all panelboards Wire size of terminals (refer to the technical information below) Table 7: Ground Bar Kits Catalog umber Terminals Material PK23GTAL 23 AL PK27GTA 25 CU PK27GTACU 27 AL 24 small terminals and large terminal Order enough ground bar kits to accommodate all the ground conductors used in the panel Ground Bar Kit Ground Bar Insulator Kits (Catalog o. PKGTAB) The insulator kit isolates the standard panelboard ground bar from the panelboard The insulator kit is field installable, and panelboard enclosures have ground bar mounting provisions in all four corners Ground Bar with Insulator Kit Technical Information All PK equipment grounding kits are supplied with mounting screws, installation instructions, and an Equipment Grounding Terminal self-adhesive label. Table 8: Technical Information Catalog umber umber of Terminals Terminals Quantity Available for Each ize Material I / II Approximate Overall Length Inches (mm) Distance Between Mounting Holes Inches (mm) PK23GTAL 24 AL 23 / 9.25 (232) 3.25 (79) PK27GTA 27 AL 24 / 9.25 (232) 3.25 (79) PK27GTACU 27 CU 27 / (232) 3.25 (79) ee wire range table below. Table 9: Wire Range ize Cu Al I () #4 to #4 or (2) #4 or #2 () #2 to #4 or (2) #2 or #0 II () # to 4/0 () # to 4/0 0

11 urge Protection urge Protection The urgelogic IMA series surge protective device is a modular parallel transient voltage surge suppressor (TV). The IMA device is a multi-stage suppression circuit consisting of field-proven, fast-acting, 34 mm metal oxide varistors (MOVs). A surge suppression path is provided for each mode, line-to-neutral (L-), line-to-line (L-L), line-to-ground (L-G), and neutral-to-ground (-G). Each surge suppression mode is individually fused and uses circuitry with thermal cutouts to isolate the TV and ensure shutdown in the event of MOV damage during severe overvoltages, even when operated on high fault current power systems. The suppression elements are encapsulated in a UL recognized potting material another performance element that provides additional protection. A filter provides a high level of EMI/RFI noise attenuation. On-line diagnostics continuously monitor the device status, and LEDs signal loss of a suppression circuit. An audible alarm with an enable/disable feature and dry contacts are included in the standard diagnostic package. F Main Lugs Panelboard with Integral TV Table 0: F Interiors with TV Mains Rating Max Circuit Breaker paces 250 A A 42 TV Rating Components for Adding a Vertical Main Circuit Breaker Interior Catalog Voltage urge Rating umber 2 Main Circuit Breaker Kit Main Circuit Breaker Frames 20 F442L2TV42 50MH 3 480Y/277 Vac 60 F442L2TV46 250MJ 600Y/347 Vac 20 F442L2TV82 250MKC 20 F442L4TV42 480Y/277 Vac 60 F442L4TV46 400M 600Y/347 Vac 20 F442L4TV82 HD, HG, HJ or HL JD, JG, JJ or, JL KI LAL/LHL (LC and LI F/A only) These interiors are available as catalog numbered devices. TV is not available as a field-installable kit. 2 3 To order an interior with copper bus, add a C to the end of the catalog number (example: R442L2TV42C). RTI kit accepts maximum 25 A H-frame circuit breaker. Table : IMA eries Voltage pecifications UL uppression Voltage Rating (VR) ervice Voltage L L G G L L MCOV 20/240 Vac, -phase Y/20 Vac, 3-phase, 4-wire /20 Vac, 3-phase, high-leg delta 800/ / / /50 480Y/277 Vac, 3-phase, 4-wire Y/347 Vac, 3-phase, 4-wire MCOV: maximum continuous operating voltage.

12 urge Protection Table 2: Performance Features urge Capacity L L G G (3-Phase Rating) 00 ka / phase 50 ka 50 ka 00 ka 20 ka / phase 60 ka 60 ka 20 ka 200 ka / phase 00 ka 00 ka 200 ka 60 ka / phase 80 ka 80 ka 20 ka 240 ka / phase 20 ka 20 ka 20 ka Table 3: pecifications Relative Humidity Operating Frequency torage Temperature Operating Temperature Display Operating Temperature tandards Fusing Audible Alarm Dry Contacts 0 to 95% non-condensing Hz -40 to +65 C (-40 to +49 F) -40 to +65 C (-40 to +49 F) -0 to +50 C (+4 to +22 F) C-UL, UL 449 econd Edition UL Category ection 37.3 (200 ka short-circuit current module rating) Individually fused suppression modules Provides audible indication that there is a loss of protection Provides remote indication of the TV device s operating status to a computer interface board or emergency management system Table 4: Option urge Counter Remote Monitor Other Options Description Displays the combined total number of transient voltage surges detected from L G, L L, L, and G since the counter was last reset. Displays the alarm status of the surge protective device up to,000 ft. (305 m) away from the unit. This option uses the dry contacts. Design Features Individually fused suppression modules Thermal cutout Inline, copper bus bar connection olid state bi-directional Push-to-Test on-line diagnostic display Audible alarm with enable/disable switch LED indicators indicate loss of protection, or fully operational circuit High-energy parallel design for IEEE C62.4 category A, B, and C3 applications Available in main circuit breaker and main lug only panelboards with sub-feed circuit breakers, feed-through lugs, or sub-feed lugs AC tracking filter with EMI/RFI filtering up to -50 db from 00 khz to 00 MHz 2

13 Enclosures Enclosures Enclosure Types Type Environment Protects Against Type Indoor Contact with the enclosed equipment, falling dirt Type 2 Indoor Type, plus Dripping and light splashing of non-corrosive liquids Type 3R Outdoor Type 2, plus Rain, snow, and sleet Type 3R, plus Mono-Flat Type Enclosure for A Interiors Type 4 Type 4X Indoor/outdoor Indoor/outdoor Circulating dust, lint, fibers and flyings ettling airborne dust, lint, fibers and flyings Windblown dust Hosedown and splashing water Type 4, plus Corrosive agents Type 5 Indoor Type 2, plus ettling airborne dust, lint, fibers, and flyings Type 2, plus Type 2 Indoor Circulating dust, lint, fibers, and flyings ettling airborne dust, lint, fibers, and flyings Oil and coolant seepage Indoor Enclosures (Types and 2) MH type Box tandard boxes are 20 in. (508 mm) wide by 5.75 in. (223 mm) deep F interiors with an LC or LI main circuit breaker or with an 800 A MLO interior require an 8.75 in. (223 mm) deep box therefore, they are available factory-assembled and fully-assembled only Boxes are galvanized steel with removable endwalls. On standard 5 3/4 inch depth boxes, one endwall is provided with knockouts, and the other endwall is blank. On deeper boxes, both are blank. Endwalls are removable and interchangeable Box and interior mounting instructions are included in the documentation shipped with the interior Keyhole slots are located in the box backwall to ease installation OTE: Interiors mount directly to studs in MH boxes. o interior mounting brackets are required. OTE: 800 A interiors and interiors that have LC/LI main circuit breakers require elevating brackets, due to the requirement of an 8.75 in. (223 mm) deep box. Type 2 boxes include a drip hood (available with surface mounted trim only) Type Enclosure for A Interiors 3

14 Enclosures Type and 2 Trim Fronts Finished with gray-baked enamel electrodeposited over cleaned, phosphatized steel (AI 49) Order flush or surface mounted Door with flush lock; uses R-25 key Directory card located on the inside of the door Mono-Flat fronts on A interiors mount to the interior trim with trim screws. Both trim mounting screws and door hinges are concealed; fronts are not removable with the door closed and locked Fronts for A interiors are ventilated and mount to the enclosure with trim screws; door hinges are concealed Fronts 56 in. (422 mm) high or more on 250 A interiors or 74 in. (880 mm) high or more on 600 A and 800 A interiors have two flush locks Fronts 68 in. (727 mm) high or more on interiors with LC/LI main circuit breakers or LC sub-feed circuit breakers use a sliding vault lock with 3-point latching Key R-25 (Catalog o. LP968) Concealed Hinge for A Trim Fronts Interiors Mount Directly to Enclosure tuds tandard Flush Lock (Catalog o. PK4FL) Optional liding Vault Lock (Catalog o. PK5FL) MH Box 4

15 Rainproof (Type 3R) Dust tight (Type 5 and 2) F Circuit Breaker Panelboards Enclosures Finished with gray-baked enamel electrodeposited over cleaned, phosphatized galvanized steel (AI 49) Gasketed door with lockable vault handle (PK4VL); uses R-25 key Directory card located on the inside of the door o knockouts in endwalls Trim kit included for end and side gutters Provisions for two ground bars 25 A, 250 A, 400 A main lug and main circuit breaker interiors 600 A and 800 A main lug only Type 3R, 5, and 2 Enclosures Vault Handle with Lock (Catalog o. PK4LV) Corrosion-Resistant Fiberglass-Reinforced Polyester (Type 4X) Watertight and dust-tight Gasketed door with trunk latches Directory card located on the inside of the door tainless teel (Type 4 and 4x) Type 4X Enclosure Water and dust tight Gasketed door Directory card located on inside of door 5

16 ingle Row (Column-Width) Panelboards ingle Row (Column-Width) Panelboards Application Data Ratings Main lugs: 25 A, 225 A Main circuit breaker: 00 A, 225 A Interiors 60 A maximum branch circuit breaker Bolt-on EDB/EGB/EJB circuit breakers olid neutral opposite mains Column-Width Panelboard Enclosures 8-5/8 in. (29 mm) wide by 5-5/8 in. (43 mm) deep for 0 in. (254 mm) H- or I-beam Galvanized steel Removable endwalls Trim Fronts crew mounted Door with two flush latches Finish: gray-baked enamel electrodeposited over cleaned, phosphatized steel Line Lugs All lugs are suitable for 75 C copper or aluminum wire Table 5: Branch Circuit Breaker hort-circuit Current Ratings Branch Breaker Prefix, 2 and 3 pole 5 to 480Y/277 Vac hort Circuit Current Rating eries ratings are also available. Canada: ee the eries Rating Guide (data bulletin 600PD0302EP R ). UA: ee witchboard/panelboard hort-circuit Ratings (data bulletin 2700DB990), or the Digest 600Y/347 Vac EDB 8,000 A 4,000 A EGB 35,000 A 8,000 A EJB 65,000 A 25,000 A 6

17 ingle Row (Column-Width) Panelboards Cable Trough Pull Box (Cover Removed) olid eutral Cable Trough Cable trough is stackable 8-5/8 in. (29 mm) wide by 5-5/8 in. (43 mm) deep for 0 in. (254 mm) I-beam or H-beam Galvanized steel trough uses enclosure endwall crew-mounted two-piece front 5 in. (38 mm) long top piece of front removable for pull box mounting Finish: gray-baked enamel electrodeposited over cleaned, phosphatized steel Table 6: Column-Width Cable Trough ingle Row (Column-Width) Panelboard Length of Cable Trough Catalog o. 36 in. (94 mm) TX in. (29 mm) TX in. (422 mm) TX in. (676 mm) TX in. (234 mm) TX in. (2438 mm) TX in. (2642 mm) TX804 2 in. (2845 mm) TX82 Cable Trough Top View with I-Beam Pull Box (catalog number MPX8542) Mounts on cable trough 20 in. (508 mm) wide by 5-3/4 in. (46 mm) deep by 5 in. (38 mm) high crew-mounted front Finish: gray-baked enamel electrodeposited over cleaned, phosphatized steel Removable top endwall with knockouts olid neutral included 7

18 Terminal Data Terminal Data Main Lugs Terminal Data Table 7: tandard Aluminum and Copper Lugs Aluminum Copper Amperes Aluminum Mechanical Aluminum Compression Copper Mechanical Copper Compression Cat. # Lug Wire Range Cat. # Lug Wire Range Cat. # Lug Wire Range Cat. # Lug Wire Range 25 FALM () #6-2/0l 250 FAML2 () #6-350 kcmil FALV2 400 FALM4 eutral accepts #6-2/0 Al/Cu. () /0-750 kcmil or (2) /0-350 kcmil FALV () #4-300 kcmil FCUM () kcmil FALV4 (2) 2/0-500 kcmil FCUM2 FCUM4 () #6-350 kcmil () #6-350 kcmil () /0-750 kcmil or (2) /0-350 kcmil 600 FALM6 (2) /0-600 kcmil FALV6 (2) 2/0-500 kcmil FCUM6 (2) /0-750 kcmil 800 Contact the Technical Applications Group (TAG) FCUV FCUV 2 FCUV 4 FCUV 6 () #6 - /0 () 2/0-300 kcmil () kcmil (2) kcmil Main Circuit Breaker Terminal Data ee Digest section 7 for copper lugs. Table 8: tandard Aluminum Mechanical Lugs Panelboard Type Ampere Rating Circuit Breaker Type Lug Wire Range 00 A FIL () #4-/0 Cu or () #2-/0 Al 25 A EDB, EGB, EJB () #4-2/0 Al/Cu 50 A HDL, HGL, HJL, HLL () #4-3/0 Al/Cu F 250 A JDL, JGL, JJL, JLL, KI () 3/0-350 kcmil Al/Cu 400 A LAL, LHL () #-600 kcmil Al/Cu or (2) #-250 kcmil Al/Cu 600 A LCL, LIL, LEL, LXL LXIL (2) 4/0-500 kcmil Al/Cu 800 A 800 A main breaker panelboard not available. 0 A maximum at 600Y/347 Vac. Table 9: Aluminum Compression Lugs Panelboard Type Ampere Rating Circuit Breaker Type Catalog o. Lug Wire Range 2 00 A FC, FI VC00FA () #8-/0 Al/Cu 25 A ED, EG, EJ VC00FD () #8-/0 Al/Cu 50 A HDL, HGL, HJL, HLL YA50HD () # 4/0 Al/Cu F 250 A JDL, JGL, JJL, JLL YA250J35 () 3/0 350 kcmil Al/Cu 250 A KI VC250KA3 () #4-300 kcmil Al/Cu 400 A LA, LH VC400LA5 2 () 2/0-500 kcmil Al/Cu 600 A LC, LI, LE, LX, LXI 800 A 800 A main breaker panelboard not available. 0 A maximum at 600Y/347 Vac. Other lug sizes available. 8

19 Typical Wiring Diagrams Typical Wiring Diagrams A Main Lugs 25 A EDB Main Circuit Breaker (0 A max. at 600/347 Vac) / / A Main Circuit Breaker Types FIL, HDL, HGL, HJL, HLL, JDL, JGL, JJL, JLL, KIL A Main Lugs A Main Circuit Breaker Types LAL, LHL, LCL, LIL -Phase, 3-Wire A Main Lugs 25 A EDB Main Circuit Breaker (0 A max. at 600/347 Vac) / / A Main Circuit Breaker Types FIL, HDL, HGL, HJL, HLL, JDL, JGL, JJL, JLL, KIL A Main Lugs A Main Circuit Breaker Types LAL, LHL, LCL, LIL 3-Phase, 4-Wire 9

20

21

22 chneider Electric UA 252 orth Tippecanoe Peru, I UA -888-quareD ( ) chneider Electric Canada 9 Waterman Avenue, M4B Y2 Toronto, Ontario "urgelogic", "Mono-Flat", and "I-Limiter" are trademarks or registered trademarks of chneider Electric and/or its affiliates in the United tates and/or other countries. Other marks used herein may be the property of their respective owners. 670CT070 Replaces 670CT070 dated 03/2008