Marson Rivets, rivet nuts and installation tools

Transcription

1 Marson Rivets, rivet nuts and installation tools

2 Table of Contents New marson head Introduction...2 General Information Blind Rivets... esign Information...4 Steel Rivets...5 Aluminum Rivets...6 Aluminum/Steel Rivets...7 Stainless Rivets...8 Stainless/Steel Rivets...9 Closed-End Rivets...0 Multi-Grip Rivets... Specialty Rivets...2 Copper/Brass Rivets...2 Copper/Steel Rivets...2 Tri-Bulb Rivets...2 Painted Rivets...2 Back-Up Washers...2 Steel Q-Lok Rivets... T-Rivets/Klik-Split... Automotive/Special Application Rivets... Klik-Lock Rivets Plastic Rivets...6 Plastic Rivet Tools...7 Hand Rivet Tools and Kits Air/Hydraulic and Battery Rivet Tools Riveter Capacity Chart...22 Air/Hydraulic Tool imensions...22 Air/Hydraulic Tool Specifications...22 Rivet Nut Introduction...2 General Information-Rivet Nuts...24 MRN Series MPN / MTS Series...26 MLR Series...27 MLC Series...28 MSR Series...29 MSC Series...0 MHN Series... MQN / MXN Series...2 MET Series... MNN Series...4 Rivet Nut Tools and Kits Conversion Chart...4 Arconic Fastening Systems and Rings (AFSR) offers the broadest line of blind fasteners in the industry. The breadth of the line is supported by the company s Industrial istribution Group (IG) and a nationwide network of independent stocking warehouses, which maintain inventories for delivery to customers within hours. In short, the company s responsiveness to its customers and the needs of industry is second-to-none. In an ongoing effort to be the best, AFSR s Industrial istribution Group also offers custom services such as painting, plating, anodizing, packaging, bar-coding, and labeling. Quality Policy Arconic Fastening Systems and Rings is committed to satisfying our customers by delivering safe and reliable products and services. Marson Brand rivets are engineered in accordance with and governed by the Industrial Fastener Institute quality standards. 2 AFSIndustrial.com 206 Arconic Fastening Systems and Rings. Printed in U.S.A.

3 General Information Blind Rivets Rivet Styles Features/Benefits Materials Available Open End For blind fastening where there is no Steel/steel, Aluminum/aluminum access to opposite side of work Aluminum/steel, Stainless/stainless Simple to install Stainless/steel, Copper/brass, Copper/steel Wide variety of head styles and lengths available from 2" to 4" diameters Moisture-resistant due to closed end Aluminum/steel, Aluminum/aluminum, Closed End Greater shear and tensile strength Stainless/stainless Mandrel is retained 00% of time 8" to 4" diameters Multi-Grip Tri-Bulb Extended grip range capacity Reduces inventory (fewer sizes required) Use as a standard open end rivet 8" to 6" diameters Large footprint on blind side Multi-grip capability Oversized hole tolerant Great for soft or brittle materials Available in 5 2" to 6" diameters Aluminum/steel, Steel/steel Aluminum/aluminum Q-Lok Retained mandrel increases shear and tensile strength Steel/steel Use in high vibration applications Mandrel breaks flush when used in mid-grip range Moisture-resistant due to tight seal 6" diameter Permanently retained mandrel provides Steel/steel, Aluminum/aluminum, Klik-Lock increased shear and tensile values Stainless/stainless Use in high vibration applications Provides weather-resistant joint Available in 6" and 4" diameters T-Rivets High clamp up High shear strength Creates a wide bearing surface 4" diameter Aluminum/steel Special Application Small flange rivet used primarily for fastening Stainless/steel, Aluminum/aluminum Rivets decorative materials on boats, automobiles, trucks & other motor vehicles Best suited to applications where a discreet, secure installation of non-critical components is needed. Plastic Precision-molded, all-nylon Nylon body, elrin 500 Mandrel Secure lock prevents pull-out Fasten plastic to plastic, plastic to metal or plastic to fiberglass Head Styles Buttonhead Features/Benefits Low profile head diameter is twice the rivet body diameter, providing adequate bearing surface for nearly all applications Open-end buttonhead rivets offer the broadest selection of sizes available. Large Flange Provides greater bearing surface for fastening soft and brittle facing materials and oversize facing holes Works well with soft materials, where the increased flange diameter protects the integrity of the application Countersunk 20 countersunk rivets for applications where flush appearance is required Arconic Fastening Systems and Rings offers a full line of Marson brand rivets for general consumer and industrial applications. These easy-to-use rivets are used to fasten together two or more pieces of material of varying thickness.

4 esign Information New marson head AFSR Code escriptions Example: ABL6-6A A First Letter...Rivet material (A = Aluminum, S = Steel, C = Copper, SS = Stainless Steel) B Second Letter...Style of Head (B = Buttonhead, C = Countersunk) L Third Letter (if any)...large Flange Head 6 First Number...Body iameter in 2nds 6 Second Number...Maximum Grip Length in 6th s A Final Letter...A = Aluminum Mandrel, S = Stainless Steel Mandrel, B = Brass Mandrel, C = Copper-plated Steel Mandrel, CL = Closed-End MG = Multi-Grip, QL = Q-Lok, KL = Klik-Lock ATB = All Aluminum Tri-Bulb rivet. No letter indicates steel mandrel. esign Information. The shear and tensile strength of the rivet selected and the number of rivets used in the application SHEAR should equal or exceed the joint strength requirements. Typical ultimate shear and tensile strengths are listed by diameter and material on pages 5 through 6 of this catalog. Testing is recommended before final selection and use in product. TENSILE 2. The rivet body material should be compatible with the materials to be joined to resist galvanic corrosion which may result in reduction of joint strength. If dissimilar materials are widely separated on the galvanic chart, it is advisable to separate them with a dielectric material such as paint or other coating. AFSR can paint colors to match, as well as anodize or plate to your specifications.. After determination of strengths required by diameter and material, the total thickness of materials to be joined must be considered. The grip range for each rivet is listed on pages 5 through 6. Select the rivet grip range which includes the total thickness of materials to be joined. Please note that the rivet barrel GRIP length (Column L) is not the grip range. 4. Use recommended hole sizes for each rivet as shown on pages 5-6. An undersize hole will not allow insertion of rivet body. An oversize hole may cause rivet failure, joint failure and could adversely affect rivet shear and tensile strengths. 5. The various head styles (illustrated page ) are offered to accommodate different assembly needs. The most popular Klik-Fast rivet is the buttonhead, whose lower-profile head is twice the diameter of the rivet body. This provides adequate bearing surface for nearly all applications. The large flange Klik-Fast rivet provides greater bearing surface for fastening soft or brittle facing materials. The countersunk Klik-Fast rivet is available for applications where a flush appearance is required. 6. Please visit us at afsindustrial.com and your questions. We will follow up with evaluations, recommendations and testing if required. Samples are available upon request. Special packaging available. STEEL STEEL RIVET To install Insert rivet mandrel in rivet setting tool. Or insert rivet into prepared hole and then engage the mandrel with rivet-setting tool. Squeeze trigger or handles to set rivet. Mandrel ejects after rivet is set. 2 Using tool as a guide, insert rivet into prepared hole. Blind rivet benefits One Length Hollow Extrusions High Grip Strength Hard and Handles Both and Tubes No Surface istortion Soft Materials 4 AFSIndustrial.com Vibration and High Strength No Marred Surfaces Low-Profile Heads Tamper Resistant

5 Buttonhead AFSR escription Bulk Part No.** Rivet ia. Nom. Inch Steel Rivets Plated-Steel Rivet Coated Steel Mandrel IFI Grade 0 H Head ia. Nom. Inch E Head Height Max. Inch L Rivet Length Max. Grip Range rill No. & Typical Ultimate Strength (lbs.) (newtons) Inch (mm) (mm) (mm) (mm) (mm) Inch (mm) Shear Tensile SB-2 M /2" (.094) #4 ( ) SB-4 M ( ) SB4- M /8" (.25) #0 (.29-.) SB4-2 M (.28-.8) SB4- M SB4-4 M SB4-5 M SB4-6 M SB4-8 M SB4-0 M SB5-2 M /2" (.56) #20 ( ) SB5- M ( ) SB5-4 M SB5-6 M SB5-8 M SB5-0 M SB5-2 M SB6-2 M /6" (.87) # ( ) SB6-4 M ( ) SB6-6 M SB6-8 M SB6-0 M SB6-2 M SB6-4 M SB6-6 M SB8-2 M /4" (.250) F ( ) SB8-4 M ( ) SB8-6 M SB8-8 M SB8-0 M SB8-2 M SB8-4 M SB8-6 M Large Flange SBL4-2 M " (.25) #0 (.29-.) SBL4- M (.28-.8) SBL4-4 M SBL4-6 M SBL4-8 M SBL5-4 M /2"(.56) #20 ( ) SBL5-6 M ( ) SBL5-8 M SBL6-4 M " (.87) # ( ) SBL6-6 M ( ) SBL6-8 M SBL6-0 M SBL6-2 M SBL6-4 M SBL6-6 M Countersunk SC4-2 M " (.25) #0 (.29-.) SC4- M (.28-.8) SC4-4 M SC4-6 M SC4-8 M SC5-4 M /2" (.56) #20 ( ) ( ) SC6-4 M " (.87) # ( ) SC6-6 M ( ) KLIK-FAST RIVETS conform to IFI-4 (inch) and IFI-505 (metric). Millimeters (mm) and newtons (N) are in green. ** Also available in various packaged quantities. 5

6 Aluminum Rivets New marson head 5052 Aluminum Rivet Aluminum Mandrel IFI Grade Buttonhead AFSR escription Bulk Part No.** Rivet ia. Nom. Inch H Head ia. Nom. Inch E Head Height Max. Inch L Rivet Length Max. Grip Range rill No. & Typical Ultimate Strength (lbs.) (newtons) Inch (mm) (mm) (mm) (mm) (mm) Inch (mm) Shear Tensile AB-2A M /2" (.094) #4 ( ) AB-4A M ( ) AB4-A M /8" (.25) #0 (.29-.) AB4-2A M (.28-.8) AB4-A M AB4-4A M AB4-5A M AB4-6A M AB4-8A M AB4-0A M AB5-2A M /2" (.56) #20 ( ) AB5-A M ( ) AB5-4A M AB5-6A M AB5-8A M AB5-0A M AB5-2A M AB6-2A M /6" (.87) # ( ) AB6-4A M ( ) AB6-6A M AB6-8A M AB6-0A M AB6-2A M AB6-4A M AB6-6A M AB8-4A M /4" (.250) F ( ) AB8-6A M ( ) AB8-8A M AB8-0A M AB8-2A M AB8-4A M Large Flange ABL4-2A M " (.25) #0 (.29-.) ABL4-A M (.28-.8) ABL4-4A M ABL4-6A M ABL4-8A M ABL5-4A M /2" (.56) #20 ( ) ( ) ABL6-4A M " (.87) # ( ) ABL6-6A M ( ) ABL6-8A M ABL6-0A M ABL6-2A M ABL6-6A M Countersunk AC4-2A M " (.25) #0 (.29-.) AC4-A M (.28-.8) AC4-4A M AC4-6A M AC5-4A M /2" (.56) #20 ( ) AC5-6A M ( ) AC6-4A M " (.87) # ( ) AC6-6A M ( ) AC6-8A M KLIK-FAST RIVETS conform to IFI-4 (inch) and IFI-505 (metric). Millimeters (mm) and newtons (N) are in green. ** Also available in various packaged quantities. 6 AFSIndustrial.com

7 Aluminum/Steel Rivets Buttonhead AFSR escription Bulk Part No.** 5056 Aluminum Rivet Coated Steel Mandrel IFI Grade 9 Rivet ia. Nom. Inch H Head ia. Nom. Inch E Head Height Max. Inch L Rivet Length Max. Grip Range rill No. & Typical Ultimate Strength (lbs.) (newtons) Inch (mm) (mm) (mm) (mm) (mm) Inch (mm) Shear Tensile AB-2 M /2" (.094) #4 ( ) AB-4 M ( ) AB4- M /8" (.25) #0 (.29-.) AB4-2 M (.28-.8) AB4- M AB4-4 M AB4-5 M AB4-6 M AB4-8 M AB4-0 M AB5-2 M /2" (.56) #20 ( ) AB5- M ( ) AB5-4 M AB5-6 M AB5-8 M AB6-2 M /6" (.87) # ( ) AB6-4 M ( ) AB6-6 M AB6-8 M AB6-0 M AB6-2 M AB6-6 M AB8-4 M /4" (.250) F ( ) AB8-6 M ( ) AB8-8 M AB8-0 M AB8-2 M AB8-4 M AB8-6 M Large Flange ABL4-2 M " (.25) #0 (.29-.) ABL4- M (.28-.8) ABL4-4 M ABL4-6 M ABL5-4 M /2" (.56) #20 ( ) ( ) ABL6-4 M " (.87) # ( ) ABL6-6 M ( ) ABL6-8 M ABL6-0 M ABL6-2 M ABL6-4 M ABL6-6 M Countersunk AC4-2 M " (.25) #0 (.29-.) AC4- M (.28-.8) AC4-4 M AC4-5 M AC5-4 M /2" (.56) #20 ( ) AC5-6 M ( ) AC5-8 M AC6-4 M " (.87) # ( ) AC6-6 M ( ) AC6-8 M KLIK-FAST RIVETS conform to IFI-4 (inch) and IFI-505 (metric). Millimeters (mm) and newtons (N) are in green. ** Also available in various packaged quantities. 7

8 Stainless Rivets New marson head Stainless Rivet Stainless Mandrel IFI Grade 5 Buttonhead AFSR escription Bulk Part No.** Rivet ia. Nom. Inch H Head ia. Nom. Inch E Head Height Max. Inch L Rivet Length Max. Grip Range rill No. & Typical Ultimate Strength (lbs.) (newtons) Inch (mm) (mm) (mm) (mm) (mm) Inch (mm) Shear Tensile SSB4-S M /8" (.25) #0 (.29-.) SSB4-2S M (.28-.8) SSB4-S M SSB4-4S M SSB4-5S M SSB4-6S M SSB4-8S M SSB5-2S M /2" (.56) #20 ( ) SSB5-S M ( ) SSB5-4S M SSB5-6S M SSB5-8S M SSB5-0S M SSB6-2S M /6" (.87) # ( ) SSB6-4S M ( ) SSB6-6S M SSB6-8S M SSB6-0S M SSB6-2S M SSB6-6S M SSB8-4S M /4" (.250) F ( ) SSB8-6S M ( ) SSB8-8S M SSB8-0S M SSB8-2S M Large Flange SSBL4-2S M " (.25) #0 (.29-.) SSBL4-S M (.28-.8) SSBL4-4S M SSBL6-4S M " (.87) # ( ) SSBL6-6S M ( ) SSBL6-8S M SSBL6-0S M SSBL6-2S M Countersunk SSC4-2S M " (.25) #0 (.29-.) SSC4-S M (.28-.8) SSC4-4S M SSC4-5S M SSC6-4S M " (.87) # ( ) ( ) KLIK-FAST RIVETS conform to IFI-4 (inch) and IFI-505 (metric). Millimeters (mm) and newtons (N) are in green. ** Also available in various packaged quantities. 8 AFSIndustrial.com

9 Stainless/Steel Rivets Buttonhead AFSR escription Bulk Part No.** Rivet ia. Nom. Inch Stainless Rivet Coated Steel Mandrel IFI Grade 50 H Head ia. Nom. Inch E Head Height Max. Inch L Rivet Length Max. Grip Range rill No. & Typical Ultimate Strength (lbs.) (newtons) Inch (mm) (mm) (mm) (mm) (mm) Inch (mm) Shear Tensile SSB4- M /8" (.25) #0 (.29-.) SSB4-2 M (.28-.8) SSB4- M SSB4-4 M SSB4-5 M SSB4-6 M SSB4-8 M SSB5-2 M /2" (.56) #20 ( ) SSB5-4 M ( ) SSB5-6 M SSB6-2 M /6" (.87) # ( ) SSB6-4 M ( ) SSB6-6 M SSB6-8 M SSB6-0 M SSB6-2 M SSB6-6 M Large Flange SSBL4-2 M "(.25) #0(.29-.) SSBL4- M (.28-.8) SSBL4-4 M SSBL6-4 M "(.87) #( ) SSBL6-6 M ( ) SSBL6-8 M SSBL6-0 M SSBL6-2 M Countersunk SSC4-2 M "(.25) #0(.29-.) SSC4- M (.28-.8) SSC4-4 M SSC4-5 M SSC6-4 M "(.87) #( ) ( ) KLIK-FAST RIVETS conform to IFI-4 (inch) and IFI-505 (metric). Millimeters (mm) and newtons (N) are in green. ** Also available in various packaged quantities. 9

10 Closed-End Rivets New marson head 5056 Aluminum/Steel IFI Grade 9 Buttonhead AFSR escription Bulk Part No.** Rivet ia. Nom. Inch H Head ia. Nom. Inch E Head Height Max. Inch L Rivet Length Max. Grip Range rill No. & Typical Ultimate Strength (lbs.) (newtons) Inch (mm) (mm) (mm) (mm) (mm) Inch (mm) Shear Tensile AB4-C M "(.25) # AB4-2C M (.29-.) AB4-C M AB4-4C M AB4-5C M AB4-6C M AB5-2C M "(.57) # AB5-C M ( ) AB5-5C M AB6-2C M "(.88) # AB6-4C M ( ) AB6-6C M AB6-8C M AB6-0C M AB8-4C M "(.252) F AB8-6C M ( ) Countersunk AC4-2C M "(.25) # AC4-C M (.29-.) AC4-4C M AC6-4C M "(.88) # ( ) All Aluminum Buttonhead - IFI Grade 9 AB4-2AC M "(.25) # AB4-AC M (.29-.) AB4-4AC M AB5-4AC M "(.57) # ( ) AB6-2AC M "(.88) # AB6-4AC M ( ) AB6-6AC M AB6-8AC M AB6-0AC M All Stainless Buttonhead - IFI Grade 5 SSB4-2SC M "(.25) # SSB4-SC M (.29-.) SSB4-4SC M SSB6-2SC M "(.88) # SSB6-4SC M ( ) SSB6-6SC M SSB6-8SC M SSB6-0SC M Note: A slightly smaller mandrel diameter is required for closed-end rivets; therefore when setting closed-end rivets using Marson brand rivet setting tools, we recommend you use one size smaller nosepiece when possible (i.e., to set /8 rivets, use /2 nosepiece). KLIK-FAST RIVETS conform to IFI-26 (inch). Millimeters (mm) and newtons (N) are in green. **Also available in packaged quantities. 0 AFSIndustrial.com

11 Multi-Grip Rivets Buttonhead Large Flange Countersunk Steel Buttonhead AFSR escription Bulk Part No.** Rivet ia. Nom. Inch H Head ia. Nom. Inch Plated Steel Rivet Steel Mandrel E Head Height Max. Inch L Rivet Length Max. Grip Range rill No. & Typical Ultimate Strength (lbs.) (newtons) Inch (mm) (mm) (mm) (mm) (mm) Inch (mm) Shear Tensile SB4-42MG M /8"(.25) #0(.29-.) (.28-.8) SB52-5MG M /2"(.56) #20( ) ( ) SB62-6MG M /6"(.87) #( ) ( ) SB6-64MG M Aluminum/Steel Buttonhead AB4-4MG M /8"(.25) #0(.29-.) AB42-44MG M (.28-.8) AB44-45MG M AB45-46MG M AB52-54MG M /2"(.56) #20( ) AB54-56MG M ( ) AB56-58MG M AB62-64MG M /6"(.87) #( ) AB6-67MG M ( ) AB66-68MG M AB60-62MG M Aluminum/Steel Large Flange ABL42-4MG M /8"(.25) #0(.29-.) ABL42-44MG M (.28-.8) ABL44-45MG M ABL52-54MG M /2"(.56) #20( ) ABL5-55MG M ( ) ABL55-58MG M ABL62-64MG M /6"(.87) #( ) ABL66-68MG M ( ) ABL60-62MG M Aluminum/Steel 20º Countersunk AC4-44MG M /8"(.25) #0(.29-.) (.28-.8) AC5-55MG M /2"(.56) #20( ) ( ) AC62-65MG M /6"(.87) #( ) AC66-68MG M ( ) Countersunk Total Length (L) including head Millimeters (mm) and newtons (N) are in green. **Also available in packaged quantities. *Klik-Fast multi-grip rivets conform to IFI-6. Multi-grip rivets provide an effective and economical alternative to other, more costly methods of fastening, because one size handles the grip range capacity of up to standard open end rivets. Multi-grip rivets can be used in any application requiring open end rivets, while reducing inventory requirements. Use multi-grip rivets as a standard open-end rivet... no special tool is needed.

12 Specialty Rivets New marson head #0 Copper/Brass & #0 Copper/Steel (plated mandrel) AFSR escription Bulk Part No.** Grip Range Rivet ia. Nom. Inch rill No. & H Head ia. Nom. Inch E Head Height Max. Inch L Rivet Length Max. Typical Ultimate Strength (lbs.) (newtons) Inch (mm) (mm) (mm) (mm) (mm) Inch (mm) Shear Tensile CB4-2B M " (.25) #0 (.29-.) CB4-4B M (.28-.8) CB4-2C M " (.25) #0 (.29-.) CB4-4C M (.28-.8) B - Copper/Brass; C - Copper/Steel (plated mandrel) **Also available in packaged quantities. Tri-Bulb Rivets AFSR escription 2 AFSIndustrial.com Grip Range rill No. & A E H N Y Shear Tensile lbs. newtons lbs. newtons A056ATB 5/2" (.56) #20 ( ) A052ATB A069ATB /6" (.87) # ( ) A0622ATB A0625ATB A060ATB AL0625ATB For black rivets add BL to the part number. White available as special order item. Refer to price list for bulk part number. Painted Rivets * AFSR escription Back-Up Washers AFSR escription Bulk Part No.** Standard Carton Qty. Rivet Color Bulk Part No.** 500 Pack No. Rivet ia. Nom. Inch Material W=White BR=Brown BL=Black For H Head ia. Nom. Inch Size/Shape SS- 5M M5065 M4065 STEEL 2" 2" SQ SS-4 5M M50654 M40654 STEEL 8" 2" SQ SS-6 5M M50656 M40656 STEEL 6" 2" SQ SS-8 0M M50658 M40658 STEEL 8" 8" R SS-9 0M M50655 M40655 STEEL 5 2" 7/6" R SS-0 0M M5066 M4066 STEEL 6" 2" R SS-2 0M M50662 M40662 STEEL 4" 2" R AS-8 0M M50657 M40657 ALUMINUM 8" 8" R AS-9 0M M50659 M40659 ALUMINUM 5 2" 7 6" R AS-0 0M M50660 M40660 ALUMINUM 6" 2" R AS-2 0M M50665 M40665 ALUMINUM 4" 2" R **Also available in packaged quantities. E Head Height Max. Inch L Rivet Length Max. Grip Range rill No. & Typical Ultimate Strength (lbs.) (newtons) Inch (mm) (mm) (mm) (mm) (mm) Inch (mm) Shear Tensile AB4-2AW M502 W #0 (.29-.) AB4-AW M5007 W (.28-.8) AB4-4AW M5009 W AB4-2ABR M5097 BR #0 (.29-.) AB4-ABR M508 BR (.28-.8) AB4-4ABR M5099 BR AB4-2ABL M5098 BL #0 (.29-.) AB4-ABL M502 BL (.28-.8) AB4-4ABL M500 BL SB4-2W M50 W #0 (.29-.) SB4-W M504 W (.28-.8) SB4-4W M506 W SB4-2BR M500 BR #0 (.29-.) SB4-BR M50 BR (.28-.8) SB4-4BR M502 BR SB4-2BL M5060 BL #0 (.29-.) SB4-4BL M505 BL (.28-.8) *Custom colors available; contact factory for additional information. Painted rivets work best when hole size is at the high end of tolerance to allow for paint. **Also available in packaged quantities. Back-up washers are.056"-.062" thick. They are used when fastening soft materials or to compensate for oversize holes. ouble-ended rill Bit/M900 This double-ended drill bit provides the correct size hole and angle for /8" diameter countersink rivets, drilling and countersinking in one operation.

13 Plated Steel Body Plated Steel Mandrel AFSR escription Bulk Part No.** Aluminum/Steel Specialty Rivets Steel Q-Lok Rivets Grip Range H E L Typical Ultimate Rivet ia. Nom. Inch rill No. & Head ia. Nom. Inch Head Height Max. Inch Rivet Length Max. Strength (lbs.) (newtons) Inch (mm) (mm) (mm) (mm) (mm) Inch (mm) Shear Tensile SB6-2QL M /6"(.87) #( ) SB6-4QL M ( ) SB6-6QL M SB6-8QL M T-Rivets/Klik-Split M /4"(.250) F( ) M ( ) M M M M Requires nosepiece No. M96028 when using the Marson brand Big addy or Big addy II hand tool. KLIK-FAST RIVETS conform to IFI-0 (inch) and IFI-505 (metric). Millimeters (mm) and newtons (N) are in green. **Also available in packaged quantities. Trim Rivets AFSR escription Bulk Part No.** Grip Range escription Automotive/Special Application Rivets Materials Body/Mandrel Rivet ia. Nom Flange ia. Nom. Hole ia. Range 500 Pack No. ABN4-A M5026* Trim Moulding Rivet Alum/Alum M4026 ABN4-4A M50262* Long Trim Moulding Rivet Alum/Alum M40262 SSBN4- M5056* Trim Moulding Rivet w/ss Body SS/Steel M4056 *Use 92 Trim Clip Rivet Nosepieces with HP-2 or HP- to form trim clip studs with 5026; 50262; 5056 rivets. Klik-Split Window & oor Rivets 50 Pack No. M Window Regulator Rivet Alum/Steel M427 M Outside oor Handle Rivet Alum/Steel M4272 with recessed head M oor Handle Rivet with recessed head Alum/Steel M427 and zinc coated mandrel M Window Regulator Rivet Alum/Steel M4274 with yellow zinc coated mandrel M Blk. Anodized oor Handle Rivet Alum/Steel M4275 M Glass Stop Rivet Alum/Steel M4276 Requires nosepiece No. M96028 when using the Marson brand Big addy or Big addy II hand tool. Miscellaneous Rivets 50 Pack No. M Bumper Fascia Rivet Steel/Steel M450 large flange black M Trunk Lock Swivel Emblem Rivet Alum/Steel M45 sealed end, countersunk head 00 Pack No. M Rear Window Gasket Rivet Alum/Steel M4295 M Bumper Fascia Rivet Steel/Steel M48 **Also available in packaged quantities. w/yellow zinc coated mandrel

14 Klik-Lock TM Rivets New marson head After drilling hole to proper diameter, rivet is placed into hole and rivet setting tool is placed over mandrel. 2 Actuating tool starts mandrel into rivet body, pulling work material together and expanding body on the blind side. A solid circle lock is created between the body and mandrel creating a weather resistant assembly that virtually eliminates pin pushout. 4 After the mandrel is broken, the mandrel is flush with the rivet body removing the need for grinding. 5 The expansion of the body tightly fills the hole creating a weather-resistant joint. AFSR escription Bulk Part No.** A Rivet ia. Inch B Head ia. Inch C Head Height Max. Inch Body Length Max. Inch E Overall Length Max. F Length Min. Inch Grip Range Required Average Shear Average Tensile Inch Strength lbs. Strength lbs. Inch (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (newtons) (newtons) Steel Rivet Steel Mandrel Buttonhead SB6-4KL M SB6-7KL M SB6-EKL M SB8-6KL M SB8-0KL M SB8-EKL M Large Flange SBL6-4KL M SBL6-EKL M SBL8-6KL M Countersunk SC6-6KL M SC6-9KL M SC8-8KL M SC8-2KL M **Also available in packaged quantities. 4 AFSIndustrial.com

15 Klik-Lock TM Rivets AFSR escription Bulk Part No.** A Rivet ia. Inch B Head ia. Inch C Head Height Max. Inch Body Length Max. Inch E Overall Length Max. F Length Min. Inch Grip Range Required Average Shear Average Tensile Inch Strength lbs. Strength lbs. Inch (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (newtons) (newtons) Stainless Rivet Stainless Mandrel Buttonhead SSB6-4SKL M SSB6-7SKL M SSB6-ESKL M SSB8-6SKL M SSB8-0SKL M Countersunk SSC6-6SKL M SSC8-8SKL M Aluminum Rivet Aluminum Mandrel Buttonhead AB6-4AKL M AB6-7AKL M AB6-AEKL M AB8-6AKL M AB8-0AKL M AB8-AEKL M Aluminum/Large Flange ABL6-4AKL M ABL6-7AKL M Aluminum/00º Countersunk AC6-6AKL M AC6-9AKL M AC8-8AKL M AC8-2AKL M Pin Retention Values Steel Aluminum Stainless Steel lbs. lbs. lbs. /6" Pin Retention /4" Pin Retention Material and Finish Material Sleeve Pin Sleeve Finish Pin Finish Steel Low Medium Zinc Plated Zinc Plated Clear Trivalent Chromate Carbon Steel Carbon Steel Clear Chromate Zinc Plated Clear Trivalent Chromate Aluminum Clear Chromate Clear Trivalent Chromate Stainless 02 05/04 Passivated ry Lubricated When setting Marson brand Klik-Lock rivets, no special nosepiece is required. Millimeters (mm) and newtons (N) are in green. **Also available in packaged quantities. 5

16 Plastic Rivets New marson head Klik-Lok Plastic Rivets Nylon Body ST80HS elrin 500 Mandrel Marson brand Klik-Lok Plastic Rivets are the same precision-molded all-nylon rivets used by domestic auto manufacturers, both for original equipment and replacement parts. In addition, Klik-Lok Plastic Rivets are ideal for non-conductive and non-corrosive environments. Klik-Lok Plastic Rivets fasten plastic to plastic, plastic to metal and plastic to fiberglass. As they set, three legs form to securely lock the components in place and prevent pullout. Plastic rivet before and after set. iagram 00-Pack Grip Range Rivet ia. H Head ia. E Head Height Rivet Length Typical Ultimate Strength (lbs.) Reference Part No.* Inch (mm) Nom. Inch Inch (mm) Inch (mm) Inch (mm) Max. Inch (mm) Shear (N) Tensile (N) A M B M C M M E M F M G M H M I M J M K M L M M M N M * Also available in bulk 2,000/ctn and visual boxes, 20/pkg. Actual Size Rivets/Flanges When ordering, match diagram reference letter with those in above chart. A B C E F G H I J K L M N 5mm 5mm 5mm 6.mm 6.mm 6.mm 6.6mm 8 mm 5mm 5mm 6mm 6.mm 6.mm 6.6mm 6 AFSIndustrial.com

17 Plastic Rivet Tools Klik-Lok KL-2 Plastic Rivet Setter/ M48005 This long-reach tool is just what today s professional needs for hard-to-reach spots, especially in automotive applications such as flexible bumpers, wheel wells, license plate brackets and bumper reinforcements. In addition to the tool s long reach, it offers one-stroke setting and a universal nosepiece that sets all plastic rivets. The tool is packaged in a reusable, heavy-duty vinyl pouch. Weight:.75 lb. Professional Plastic Rivet Kit/M48006 This kit includes the versatile KL-2 Plastic Rivet Setter, plus a 20-pack each of our four most popular rivet sizes: No. M5806, M5808, M5849 and M5850. A reclosable carton provides storage for rivets and tool. Weight:.5 lbs. * Warning: This product contains phthalates that are chemicals known to the State of California to cause cancer, or birth defects, or other reproductive harm. 7

18 New marson head Hand Rivet Tools HP-2 /M9000* The HP-2 is the number one selling hand rivet tool in the industry. Known and trusted for durability, quality and performance, the HP-2 is often copied but never duplicated. Its square shoulder fulcrum pin of cold-formed heat-treated steel prevents pin rotation that can elongate the engaging holes and cause premature tool failure in imitation tools. Other quality features include: precision die-cast, high-strength aluminum alloy body; drop-forged carbon steel upper handle; and thick, cushionmolded vinyl grips for comfort. The HP-2 sets up to 6" steel rivets and comes with four mounted nosepieces ( 2", 8", 5 2" and 6") and a service wrench. Refer to the Riveter Capacity Chart on page 9 for specific capabilities. Weight:.2 lbs. HP- /M9002 Positi ve r stops on s wi het v atc d hea el Our newest tool offers long, ergonomically designed handles to increase leverage. The tool is spring loaded to secure the rivet in the nosepiece while the tool is in any position. The HP- offers powerful riveting capacity with 4 standard nosepieces to set /2", /8" and 5/2" in all alloys and up to /6" in steel. It features a drop-forged steel handle with heat-treated aluminum body with steel insert, high quality powder coated finish, special alloy steel fulcrum pin with anti-wearing design, and durable jaws and jaw case. Weight:.2 lbs. Klik-Turn SP-/M9005 The SP- swivel head hand-held rivet tool features a patented positive-ratchet locking feature which will allow the swivel head section of the tool to turn 60 and hold in place in any of the forty-plus positions. The highstrength steel body and cast aluminum head complement this new design in a swivel head riveting tool. The SP- also includes built-in threaded nosepiece storage holes and a service wrench. The SP- sets up to 6" steel rivets. Weight:.2 lbs. 200 Kit /M900* The deluxe hand riveter kit includes the HP-2 and 200 assorted Klik-Fast rivets: 50 each SB4-2, SB4-4, AB4-2A; 25 each SC4-4, AB6-2. The molded plastic case houses and protects the tool and rivets. Weight: 4 lbs. Stainless Steel Kit/M900* This kit is the same as our M900, but contains 200 assorted Klik-Fast stainless steel rivets: 40 each SSB4-2S, SSB4-S, SSB4-4S, SSBL4-2S, SSBL4-4S. Weight: 4 lbs. 8 AFSIndustrial.com * Warning: This product contains phthalates that are chemicals known to the State of California to cause cancer, or birth defects, or other reproductive harm.

19 Hand Rivet Tools Big addy /M90* The Big addy is the most versatile and powerful Marson brand hand riveter, taking the hard work out of setting large diameter blind rivets. Its extra-long handles provide excellent leverage and permit working a foot beyond natural reach. Other features include a patented bearing design, self-adjusting two-piece jaws and single-unit body construction with a steel insert to provide stronger threads for the nosepieces included. In addition, the Big addy features a double-gear reduction system which easily sets from 8" to 4" diameter Klik-Fast rivets in all alloys, including 4" Klik-Split and 6" and 4" Klik-Lock * rivets. And a one-piece collet case eliminates the need to adjust the tool when changing rivet diameters. The Big addy model # M90 comes with 5 2", 6" and 4" nosepieces which are stored in the body. Weight:.75 lbs. " 2 4" Standard head Big addy/m905* This is the same tool as M900, but comes with M9009 attached, extending the tool s reach by an additional 2 2". Weight: 4 lbs. Big addy/m900* This is the same tool as M90, but comes with 6", 4" and special 4" Klik-Split rivet nosepieces. Weight:.75 lbs. Big addy Conversion Kit Jaw Set Up/M96050 Converting to a three-jaw set adds additional gripping power and extends jaw life. Big addy II/M902* With all the features of the Big addy, Big addy II includes a built-in mandrel collection receptacle; just remove the end cap on the bottom handle to discard the spent mandrels. Big addy Extended Nosepiece Kit/M9009 Install kit to add an additional 2-/2" to any Big addy Tool. Weight:.25 lb. * Warning: This product contains phthalates that are chemicals known to the State of California to cause cancer, or birth defects, or other reproductive harm. Hand Rivet Tool Capacity Chart Steel All Aluminum Aluminum Steel Stainless Monobolt * T Rivets 2" 8" 5 2" 6" 4" 2" 8" 5 2" 6" 4" 2" 8" 5 2" 6" 4" 2" 8" 5 2" 6" 4" 6" 4" 6" 4" HP-2/M9000 HP-/M9002 SP-/M9005 BIG AY (All) Hand Rivet Tools Standard & Special Nosepieces Sizes Monobolt * T-Rivet Sizes 2" 8" 5 2" 6" 4" 6" 4" 6" 4" HP-2/M9000 M9 M928 M90 M929 HP-/M9002 M9 M928 M90 M929 SP-/M9005 M960 M965 M964 M962 BIG AY (All) M96024 M96025 M96026 M96027 M960 M9600 M96029 M96028 * When setting Marson band Klik-Lock rivets, no special nosepiece is required. 9

20 Automatic Tools New marson head These next-generation, professional-series air/hydraulic riveters are designed to be light weight and well-balanced. Both are engineered to maximize stroke and pull force with a -jaw set. For added convenience, you can direct connect or use the attached swivel. Each tool is supplied with nosepieces to set rivets in all alloys, and comes complete with adjustment service wrenches, hydraulic fluid, fluid applicator, spare jaws, and a removable swivel air connection line with an air OFF/ ON valve built in. An adjustable vacuum system control allows you to control the force of air needed to hold the rivet in place. Or, you may operate with the vacuum system turned off. Recommended air pressure is PSI. MP-V/M9045 Stroke: /4" Pulling Force:,800 lbs. Capacity: /2" /6", all alloys Weight: 2.9 lbs. MP-4V/M9048 Stroke: " Pulling Force:,420 lbs. Capacity: 5/2" /4", all alloys, /4" monobolt nosepiece included Weight:.7 lbs. Each of these proven, professional tools features a one-piece molded frame and front swivel air inlet for maximum operator comfort and durability. An external vacuum adjustment offers convenient air flow control for rivet placement and mandrel disposal. This allows the operator to install rivets in any orientation using one hand, and freeing up the other for assembly. Spent mandrels are conveniently collected in the bottle for disposal, encouraging a safer, clean work environment. Tools come complete with oil, replacement jaws, and nosepieces. Recommended air pressure: psi. 02-E/M9062 Stroke:.82" Pulling Force: 2,000 lbs. Capacity: /2" /6" diameter in all alloys and up to /4" in aluminum/steel combinations. Weight: 4 lbs. 04-E/M9064 Stroke: " Pulling Force: 4,200 lbs. Capacity: /6" to /4" all alloys including structural rivets Also included are /6" and /4" Monobolt & Magna-lok assemblies. Weight: 5.5 lbs. Extended head Accessory for 02-E and 04-E Tool escription Part Number 02-E/M9062 5" Extension Head M E/M9062 8" Extension Head M E/M9064 5" Extension Head M New Style 04-E/M9064 5" Extension Head M AFSIndustrial.com

21 Automatic Tools NEW The new BT- cordless, battery-powered tool offers 4,600 lbs (20,000n) of pulling force, and it only weighs 4.4 lbs. The BT- features a built-in mandrel collection box and a high-capacity 20 V Li-ion/2.0 Ah battery pack. Recharge time is approximately 0 minutes. A soft grip handle reduces vibration and fatigue. The BT- Kit includes one tool with battery, battery charger, and carrying case, along with nose tips for 5/2", /6", and /4" rivets.* BT-/M8980 Stroke:.8 (0mm) Pulling Force: 4,600 lbs. (20,000n) Capacity: /6" to /4" diameter Weight: 4.4 lbs. (with battery pack) Battery Pack: 20V/Lion/2.0 Ah Recharge Time: approx. 0 minutes *Optional nose tips for /6" and /4" Monobolts available The BT-2 cordless, battery-powered tool offers 2,7 lbs (0,000n) of pulling force, and it only weighs 4.2 lbs. The BT-2 features a built-in mandrel collection box and a high-capacity 4.4 V Li-ion/.5 Ah battery pack. Recharge time is approximately 60 minutes. A soft grip handle reduces vibration and fatigue. The BT-2 Kit includes one tool with battery, battery charger, and carrying case, along with nose tips for 5/2", /6", and /4" rivets.* BT-2/M9080 Stroke:.8 (2mm) Pulling Force: 2,7 lbs. (0,000n) Capacity: /2" to /6" diameter Weight: 4.2 lbs. (with battery pack) Battery Pack: 4.4V/Lion/.5 Ah Recharge Time: approx. 60 minutes *Optional nose tips for /6" Monobolts available The IF- is the one-and-only tool needed for singlepull installations of all blind rivets and structural blind fasteners from /6" to /4"*. Single integral front end eliminates the need for nosepiece change out during installation. The secret to the IF- s unique versatility is its stroke - the longest in the industry. *oes not include HUCK BOM structural blind fasteners NEW IntegraFuse IF-/M9075 Stroke:.25 (28.575mm) Pulling Force: 4,600 lbs. (20.5kn) Capacity: /6 /4 Weight: 4.8 lbs. (2.77kg) M-Series These proven, heavy-duty air/hydraulic riveters are designed with an aluminum forged head to hold up under demanding continuous use. The aluminum forged head allows for continuous full operating power and less internal wear. Tools come complete with nosepieces, service tools, swivel inlet air coupler and a mandrel collection bottle. Recommended air pressure: psi. M- M9054 Stroke:.55" (4mm) Pulling Force:,98 lbs. (8,820n) Capacity: /8" /6" all alloys including some structural rivets Weight: 4.2 lbs. M-4 M9058 Stroke:.748" (9mm) Pulling Force:,500 lbs. (,784n) Capacity: /2" /4" all alloys including structural rivets Weight: 6.6 lbs. 2

22 Automatic Tools New marson head Automatic Rivet Tools Standard & Special Nosepieces Standard 2" 8" 5 2" 6" MP-V/M9045 M95200 M9520 M95202 M9520 T-Rivets / Klik-Split Monobolt * 4" 6" 4" MP-4V/M9048 M9500 M950 M9502 M95299 M E/M9062 M77006 M7700 M77002 M7700 M E/M9064 M M M M M IF-/M9075 M957-2 M957 * For Monobolt structural rivets, the noted special nosepiece is required. For Marson brand Klik-Lock structural rivets, no special insert is required. 4" Automatic Rivet Tools Capacity Chart Steel All Aluminum Aluminum Steel Stainless Structural * T Rivets 2" 8" 5 2" 6" 4" 2" 8" 5 2" 6" 4" 2" 8" 5 2" 6" 4" 2" 8" 5 2" 6" 4" 6" 4" 6" 4" M-/M9054 MP-V/M9045 M-4/M9058 MP-4V/M E/M E/M9064 BT-2/M9080 BT-/M8980 IF-/M9075 * For Monobolt structural rivets, the noted special nosepiece is required. For Marson brand Klik-Lock structural rivets, no special insert is required. Automatic Rivet Tools imensions Tool A B C E F G WT M-/M9054 2" 6".25" " 6" " 2" 4.2 lbs. MP-V/M9045 0".5".5".5" 6.5".925" 2.75" 2.9 lbs. M-4/M9058 2" 4.5" 5".5" 7".987" 4.5" 6.6" MP-4V/M9048 2" 5.5" 2." 4.5" 7.".925".5".7 lbs. 02-E/M " 5" 2.75" 4.5".".828" 2.5" 4 lbs. 04-E/M " 6" 2.75" 5.25".".98" 2.5" 5.5 lbs. BT-2/M " 4" 2.25" 4.25" 8.25" " 2.75" 4.2 lbs. BT-/M8980 " 2.25" 2.5" 4.5" 9" ".25" 4.4 lbs. IF-/M9075 2" 5.56".575" 4.99" 9.8" 2.79" 4.55" 4.8 lbs. Automatic Rivet Tools Specifications Tool Work Force Stroke MP-/M psi, 2,000 lbs./8,896 n.55"/4 mm MP-V/M psi,,800 lbs./8007 n.75"/9 mm M-4/M psi,,500 lbs./5,2 n.748"/9 mm MP-4V/M psi,,420 lbs./5,2 n."/25.4 mm 02-E/M psi, 2,000 lbs./8,896 n.82"/2 mm 04-E/M psi, 4,200 lbs./8,682 n "/25.4 mm BT-2/M9080 2,7 lbs./0,000 n.8"/2 mm BT-/M8980 4,600 lbs./20,000 n.8"/0 mm IF-/M9075 4,600 lbs./20,500 n.25"/ mm 22 AFSIndustrial.com

23 Marson Rivet Nuts More styles, sizes and tools to fit your application needs. Marson Rivet Nuts deliver low cost permanent thread placement in thin material while providing at least six full thread turns per application install. Easy Installation can be completed by one operator with minimum training. Blind side access is not required when installing Marson Rivet Nuts. Ideal for painted surfaces, Marson Rivet Nuts help increase production and reduce rework by eliminating the surface damage that can occur with other fastening methods. 4 Easy Steps to Complete Installation and Application 2 4 Thread rivet nut onto tool mandrel and insert into hole. Actuate tool to properly set fastener into material. Complete your fastening operation with a bolt or screw with the proper thread. The positive riveting action of the Klik Rivet Nut will provide a permanent thread. As threads are tightened, so are rivet nut and application. Rivet Nuts can be used to fasten mulitple sheets as well as single sheets 2

24 New marson head General Information Rivet Nuts Rivet Styles Features/Benefits Materials Available MRN Series (p. 25) Rivet Nut, Flathead Flange (thick wall) for applications that require heavy push out loads (recommend spin-pull tool) Steel, Aluminum MPN Series (p. 26) Poly-Nut Rivet Nut has very small flange, lowest profile for near counter sink applications Steel, Aluminum MTS Series (p. 26) Thread-Sert has small flange, 60 degree swaging action in the hole and no maximum grip range Steel, Aluminum MLR Series (p. 27) Large Flange Ribbed Rivet Nut provides increased turn-out resistance vs conventional rivet nut and large flange for improved push out performance Steel, Aluminum MLC Series (p. 28) Large Flange Ribbed Rivet Nut with Closed End for thread seal Steel, Aluminum MSR Series (p. 29) Small Flange low profile Ribbed Rivet Nut virtually flush install with increased turn-out resistance vs conventional low profile Ply-Nut Steel, Aluminum MSC Series (p. 0) Small Flange low profile Ribbed Rivet Nut with Closed End for thread seal Steel, Aluminum MHN Series (p. ) Large Flange Half Hex Rivet Nut for hex hole to provide exceptional turn-out resistance Steel MQN Series (p. 2) Quad-Leg Rivet Nut used for light duty thin or soft/brittle material will accommodate slightly oversized hole with large back side footprint Steel MXN Series (p. 2) Large Flange Cross Bulb Rivet Nut large grip range with pre-bulb and 4 slots cut to provide large blindside footprint for greater pull out strength in thin sheet metal and plastics. Steel MET Series (p. ) External Thread Stud Rivet Nut allows for component mounting and mate nut Steel MNN Series (p. 4) Neoprene Insert with pre-molded brass nut for quick fastening in vibration and moisture resistant applications Neoprene 24 AFSIndustrial.com All finishes are RoHS compliant.

25 MRN Series Flathead Rivet Nuts Available in Steel-Zinc Plated or Aluminum MRN Series Flathead Rivet Nut (Thick Wall) MRN Rivet Nut, Flathead Flange provides the most bearing surface for applications that require heavy push out loads and high torque for use in metal, fiberglass and rigid plastics too thin for tapped holes. Spin/Pull tool is recommended although smaller thread sizes can utilize a manual tool. A B C MRN Series Flathead Rivet Nut Thread Size Grip Range A B C Min. Max. Steel *Bulk Part # Aluminum *Bulk Part # Body Length ±.05" Head ia. ±.05" Head Height (nom.) Body ia. Max. Min. Max. rill Size M570 M # M5720 M # M572 M # M570 M M572 M M5740 M M5742 M / M5750 M Q (.2) / M5752 M Q (.2) / M5754 M Q (.2) 5/ M577 M Z (.42) 5/ M5774 M Z (.42) / M578 M / M5784 M * Also available in small packaged quantities. Inch sizes are class 2B thread. 25

26 MTS Series Thread-Sert A** B ** Material Thickness Material Thickness MPN Series Poly-Rivet Nut New marson head Available in Steel-Zinc Plated or Aluminum MPN Series Lowest Profile Poly-Rivet Nut MPN Poly-Rivet Nut has very small flange, lowest profile for near flush installation. Eliminates additional operations of countersinking or dimpling of the parent material. May install with all pneumatic and manual Rivet Nut tools. A B MPN Series Poly-Rivet Nut Thread Size Grip Range Min. - Max. Steel *Bulk Part # Aluminum *Bulk Part # A B C Body Length ±.05 Head ia. ±.05 Head Height ±.005 Body ia ± 0.8 mm ± 0.8 mm ±.027 mm to mm Min. - Max M5745 M M57425 M M5745 M M57445 M / M57455 M / M57475 M / M57485 M mm M57407 N/A mm M57409 N/A mm M574 N/A mm M574 N/A mm** M5744 N/A * Also available in small packaged quantities. ** Limited availability, minimums may apply. Inch sizes are class 2B thread. Metric sizes are class 6H thread. rill Size MTS Series Thread-Sert Available in Steel-Zinc Plated or Aluminum MTS Thread-Sert fasteners have a small flange and 60 degree swaging action as the rivet nut expands inside the hole. Provides high resistance to torque out with minimal backside protrusion. Can be installed in blind hole with unlimited maximum grip range. May install with all pneumatic and manual Rivet Nut tools. A B Thread Size Steel *Bulk Part # Aluminum *Bulk Part # Body Length ±.005" Head ia. ±.005" Body ia. ±.002" Infinity rill Size rill Size 6-2 M5780 M # 2.24 A (.24) 8-2 M57820 M G (.26) 0-24 M5780 M L (.290) 0-2 M57840 M L (.290) 4-20 M57850 M / / M5787 M / M5788 M /64 * Also available in small packaged quantities. * * A and dimensions are prior to setting Inch sizes are class 2B thread. 26 AFSIndustrial.com

27 MLR Series Large Flange Ribbed Low-Profile Rivet Nuts Available in Steel-Zinc Plated or Aluminum MLR Large Flange Ribbed Rivet Nut feature ribbed external body for increased torque out resistance vs conventional rivet nut. Large flange offers improved push out performance. Overall MLR offers the best/highest strength levels. May install with all pneumatic and manual Rivet Nut tools. B A C MLR Series Large Flange Ribbed Low-Profile Rivet Nut A B C Thread Size Grip Range Min-Max Steel *Bulk Part # Aluminum *Bulk Part # Body Length ±.05" Head ia. ±.00" Head Height ±.00" ± 0.8 mm ± mm ± 0.76 mm Body ia. Max Min-Max M570 M / M572 M / M5720 M / M572 M / M570 M / M572 M / M5740 M / M5742 M /64 / M5750 M /64 / M5754 M /64 / M5758 M /64 / M5759 M /64 5/ M577 M /2 5/ M5774 M /2 5/ M5778 M /2 5/ M5779 M /2 / M578 M /2 / M5782 M /2 / M5795 M /2 / M5796 M /2 M4x M5760 M M4x M5765 M M5x M5785 M M5x M5784 M M6x M5786 M M6x M5787 M M8x M5788 M M8x M5789 M M0x M5790 M M0x M579 M imensions in green indicate millimeters (mm) * Also available in small packaged quantities. Inch sizes are class 2B thread. Metric sizes are class 6H thread. rill Size 27

28 New marson head MLC Series Large Flange Closed End Ribbed Rivet Nuts Available in Steel-Zinc Plated or Aluminum MLC Large Flange Ribbed Rivet Nut same as MLR with Closed End for complete thread seal. Use in moisture resistant applications. May install with all pneumatic and manual Rivet Nut tools. B C A MLC Series Large Flange Closed End Ribbed Rivet Nut Thread Size Grip Range Min-Max Steel *Bulk Part # Aluminum *Bulk Part # A B C Head ia. Head Height ±.00" ±.00" Body Length ±.05" ± 0.8 mm ± mm ± 0.76 mm Body ia. Max Min-Max 6-2** M270 M /64 6-2** M272 M /64 8-2** M2720 M /64 8-2** M272 M / ** M270 M / ** M272 M /64 0-2** M2740 M /64 0-2** M2742 M /64 /4-20** M2750 M /64 /4-20** M2754 M /64 /4-28** M2758 M /64 /4-28** M2759 M /64 5/6-8** M277 M /2 5/6-8** M2774 M /2 5/6-24** M2778 M /2 5/6-24** M2779 M /2 /8-6** M278 M /6 /8-6** M2782 M /6 /8-24** M2795 M /6 /8-24** M2796 M /6 M4x.07** M2760 M M4x.07** M2765 M M5x0.8**.5 -. M2785 M M5x0.8** M2784 M M6x.0** M2786 M M6x.0** M2787 M M8x.25** M2788 M M8x.25** M2789 M M0x.5** M2790 M M0x.5** M279 M imensions in green indicate millimeters (mm) * Also available in small packaged quantities. Inch sizes are class 2B thread. ** Limited availability, minimums may apply. Metric sizes are class 6H thread. rill Size 28 AFSIndustrial.com

29 MSR Series Small Flange Low Profile Ribbed Rivet Nuts Available in Steel-Zinc Plated, Aluminum, or Stainless Steel MSR Small Flange low profile Ribbed Rivet Nut virtually flush installation with ribbed external body for increased torque-out resistance vs conventional low profile Poly-Nut. May install with all pneumatic and manual Rivet Nut tools. B C A MSR Series Small Flange Low Profile Ribbed Rivet Nut A B C Thread Size Grip Range Min-Max Steel *Bulk Part # Aluminum *Bulk Part # Body Length ±.05" Head ia. ±.00" Head Height ±.00" ± 0.8 mm ± mm ± 0.76 mm Body ia. Max Min-Max rill Size Min-Max M5680 M / M5682 M / M56820 M / M5682 M / M5680 M / M5682 M / M56840 M / M56842 M /64 / M56850 M /64 / M56854 M /64 / M56858 M /64 / M56859 M /64 5/ M5687 M /2 5/ M56874 M /2 5/ M56878 M /2 5/ M56879 M /2 / M5688 M /2 / M56882 M /2 / M56895 M /2 / M56896 M /2 M4x M56860 M M4x M56865 M M5x M56884 M M5x M56885 M M6x M56886 M M6x M56887 M M8x M56888 M M8x M56889 M M0x M56890 M M0x M5689 M Thread Size Grip Range Min-Max Stainless Steel *Bulk Part # A Body Length ±.05" B Head ia. ±.00" C Head Height ±.00" ± 0.8 mm ± mm ± 0.76 mm Body ia. Max Min-Max rill Size Min-Max M / M /64 / M /64 imensions in green indicate millimeters (mm) * Also available in small packaged quantities. Inch sizes are class 2B thread. Metric sizes are class 6H thread. 29

30 New marson head MSC Series Small Flange Closed End Ribbed Rivet Nuts Available in Steel-Zinc Plated or Aluminum MSC Small Flange Ribbed Rivet Nut same as MSR with Closed End for complete thread seal. For use in moisture resistant applications. May install with all pneumatic and manual Rivet Nut tools. B C A MSC Series Small Flange Closed End Ribbed Rivet Nut (Built to order, minimums required) A B C Thread Size Grip Range Min-Max Steel *Bulk Part # Aluminum *Bulk Part # Body Length ±.05" Head ia. ±.00" Head Height ±.00" ± 0.8 mm ± mm ± 0.76 mm Body ia. Max Min-Max rill Size Min-Max M2680 M / M2682 M / M26820 M / M2682 M / M2680 M / M2682 M / M26840 M / M26842 M /64 / M26850 M /64 / M26854 M /64 / M26858 M /64 / M26859 M /64 5/ M2687 M /2 5/ M26874 M /2 5/ M26878 M /2 5/ M26879 M /2 / M2688 M /2 / M26882 M /2 / M26895 M /2 / M26896 M /2 M4x M26860 M M4x M26865 M M5x M26884 M M5x M26885 M M6x M26886 M M6x M26887 M M8x M26888 M M8x M26889 M M0x M26890 M M0x M2689 M imensions in green indicate millimeters (mm) * Also available in small packaged quantities. Inch sizes are class 2B thread. Metric sizes are class 6H thread. 0 AFSIndustrial.com

31 MHN Series Large Flange Half Hex Rivet Nuts Available in Steel-Zinc Plated Threads MHN Large Flange Half Hex Rivet Nut provides exceptional torque-out strength and superior vibration resistance as the rivet nut external flat sides engage the hex cut opening. May be installed with all pneumatic and manual Rivet Nut tools. MHN Series Large Flange Half Hex Rivet Nut A B C Thread Size Grip Range Min-Max Steel *Bulk Part # Body Length ±.05" Head ia. ±.00" Head Height ±.00" Body ia. Max Hex Hole Across Flats ± 0.8 mm ± mm ± 0.76 mm +.004"-.000" M M M M M M M M / M / M / M / M / M / M M4x M M4x M M5x M M5x M M6x M M6x M M8x M M8x M M0x M M0x M imensions in green indicate millimeters (mm) * Also available in small packaged quantities. Inch sizes are class 2B thread. Metric sizes are class 6H thread.

32 New marson head MQN Series Quad-Leg Rivet Nuts Available in Steel-Zinc Plated Threads MQN Quad-Leg Rivet Nut is used for light duty, thin, or soft/brittle material will accommodate slightly oversized hole with large back side footprint similar to a wall anchor. Utilizes dedicated manual tool for proper installation. MQN Series Quad-Leg Rivet Nut Thread Size Grip Range Min-Max Steel *Bulk Part # A B E Head Head ia Ref Height (nom.) Overall Length Body ia. Max Min-Max rill Size M P (.2) M P (.2) M X (.97) M X (.97) / M /64 / M /64 M4x M P (.2) M4x M P (.2) M5x M X (.97) M5x M X (.97) M6x M /64 M6x M /64 imensions in green indicate millimeters (mm) * Also available in small packaged quantities. Inch sizes are class 2B thread. Metric sizes are class 6H thread. MXN Series Large Flange Cross Bulb Rivet Nuts Available in Steel-Zinc Plated Threads MXN Large Flange Cross Bulb Rivet Nut has large grip range with pre-bulb shank made up of 4 slots cut to rivet nut body providing large blindside footprint for greater pull out strength. Recommended for thin sheet metal and plastics and works well in oversized hole. May be installed with all pneumatic and manual Rivet Nut tools. MXN Series Large Flange Cross Bulb Rivet Nut A B C Thread Size Grip Range Min.-Max. Steel *Bulk Part # Body Length Min.-Max. Head ia. Head Height Body ia. Max. Min.-Max. rill Size / M /64 / M , /64 5/ M /2 5/ M /2 /8-6** M #5 6MM.5-7. M X (.97) 6MM** M X (.97) 8MM.5-7. M /2 8MM** M /2 0MM**.5-7. M #5 imensions in green indicate millimeters (mm) Inch sizes are class 2B thread. Metric sizes are class 6H thread. * Also available in small packaged quantities. ** Limited availability, minimums may apply. 2 AFSIndustrial.com

33 MET Series External Thread Stud Rivet Nuts Available in Steel-Zinc Plated Threads MET External Thread Stud Rivet Nut provides a strong external thread in blind applications. Allows for component mounting and mating nut. Easy to install with Spin/Spin and manual Tools using the proper external thread front end assembly. MET Series External Thread Stud Rivet Nut (Built to order, minimums required) A** B L C Thread Size Grip Range Min-Max *Steel Bulk Part # Exposed Thread Head ia. ±.00" Body Length ±.020" Head Height ±.00" ±.25 mm ±.50 mm ±.08 mm Body ia. Max Min-Max M / M / M / M /64 rill Size M / M / M / M /64 / M /64 / M /64 5/ M /2 5/ M /2 / M /2 / M /2 4mm M mm M mm M mm M mm M mm M mm M mm M mm M mm M imensions in green indicate millimeters (mm) * Also available in small packaged quantities. ** imensions at maximum grip range. Inch sizes are class 2B thread. Metric sizes are class 6H thread.

34 New marson head MNN Series Neoprene Inserts MNN Neoprene Insert contains pre-molded brass nut for quick fastening in vibration, moisture protection, shock dampening, and even electrical insulation applications. Easy installation from blind side with conventional wrench. Just insert the proper thread screw or bolt and tighten. B C A MNN Series Neoprene Insert Thread Size Grip Range Min-Max Bulk Part # A B C Body Length ±.05" Head ia. ±.00" Head Height ±.00" ± 0.8 mm ± mm ± 0.76 mm Body ia. Max Min-Max rill Size Min-Max M / M / M W (.86) M W (.86) M W (.86) M W (.86) M W (.86) M W (.86) M W (.86) / M /2 / M /2 / M /2 / M /64 5/ M /64 5/ M /64 5/ M /4 / M /4 /2-** M /64 M M M M M M M M M M M M M M M M M M M M /2 M M /2 M M /2 M M M M M M M M M M M M imensions in green indicate millimeters (mm) Inch sizes are class 2B thread. Metric sizes are class 6H thread. 4 AFSIndustrial.com * Also available in small packaged quantities. ** Built to order, minimums required.

35 Rivet Nut Tools & Kits NEW Klik-Turn SRN-2/M9400 The SRN-2 swivel head, hand held rivet nut tool features a positive-ratchet locking feature which allows the swivel head to turn 60. This feature helps hold in place in forty-plus positions. A new design, the SRN-2 features a heat treated steel upper handle and precision die-cast body of high-strength aluminum. In addition, the SRN-2 offers adjustable stroke with a positive locking feature, patented fulcrum pin design, quick-change mandrel, comfortable hand grips, and longer handles to improve leverage. Included are built-in threaded nosepiece storage holes and a service wrench. The SRN-2 can set steel and aluminum rivet nuts up to /4-20 and 6mm. The tool is supplied with 6-2, 8-2, 0-24, 0-2, and /4-20 mandrels and nosepieces. Mandrel/Nosepiece Chart Thread Size Mandrel No. Nosepiece No. 6-2 M9454 M M9455 M M9456 M M9457 M96 /4-20 M9458 M979 /4-28* M947 M979 4mm* M9466 M974 5mm* M9467 M97 6mm* M9468 M975 *Sold seperately Mandrel/Nosepiece Chart Thread Size Mandrel No. Nosepiece No. Complete Set No. 6-2 M954 M96 M M955 M962 M M956 M96 M M957 M96 M98 Rivet Nut Setter RN-/M900 Capable of installing all sizes of rivet nuts and threaded inserts up to /4-20 and 6mm threads in steel, the next-generation Rivet Nut Setter features a quick-change mandrel and longer handles for improved leverage and an adjustable stroke, positive-stop locking feature. Rivet Nut Setter is ergonomically designed, with a forged, heattreated steel upper handle, precision die-cast body of high-strength aluminum alloy, patented fulcrum pin design, and comfortable hand grips. Supplied with 8-2, 0-24 and 0-2 mandrels and nosepieces. Available in a variety of kit forms. Weight:.2 lbs. /4-20 M958 M979 M984 /4-28 M97 M979 5/6-8* M959 Not Needed 5/6-24* M972 Not Needed /8-6* M960 Not Needed 4mm M966 M974 M985 5mm M967 M97 M986 6mm M968 M975 M987 8mm M969 Not Needed For tool RN- M900 *Not recommended for steel rivet nut. 5

36 Rivet Nut Tools & Kits New marson head Rivet Nut Kit/M90 Model M90 Rivet Nut Kit contains the M900 Rivet Nut tool in a molded plastic case; mandrels and nosepieces for 6-2, 8-2, 0-24 and /4-20, instructions and wrench. The kit also includes 0 assorted Klik Rivet Nuts and Klik Poly-Nuts: 25 each M5720, M57425, M570; 20 each M57250; 8 each M Weight: 2.75 lbs. Poly-Nut Kit/M902 Model M902 Poly-Nut Kit contains the M900 Rivet Nut tool in a molded plastic case with 8-2, 0-2 and /4-20 mandrels and nosepieces, wrench and instructions. The kit contains 52 assorted Klik Poly-Nuts: 2 each M57425, M5745, M57445; 6 each M Weight: lbs. Metric Poly-Nut Kit/M90 Model M90 Metric Poly-Nut Kit contains the M900 Rivet Nut tool in a molded plastic case with 4mm, 5mm, 6mm and 8mm mandrels and nosepieces, wrench and instructions. The kit contains 75 assorted Klik Poly-Nuts: 25 each M57407, M57409; 5 each M574; 0 each M574. Weight:.25 Ribbed Rivet Nut Kit/M95 Model M95 Ribbed Rivet Nut kit contains the M900 Rivet Nut tool in a molded plastic case; mandrels, nosepieces, wrench & instructions for setting 8-2, 0-24,0-2 and /4-20 Rivet Nuts. The kit also includes 50 assorted Ribbed style Rivet Nuts: 2 each M5720, M570, M5740; 8 each M5750; 6 each M5754. Weight: 2.75 lbs. Metric Ribbed Rivet Nut Kit/M96 Model M96 Ribbed Rivet Nut kit contains the M900 Rivet Nut tool in a molded plastic case with 4mm, 5mm and 6mm mandrels and nosepieces, wrench and instructions. The kit also includes 50 assorted Ribbed style Rivet Nuts: 2 each M5760, M5785, M5784; 8 each M5786; 6 each M5787. Weight: 2.75 lbs. Steel Klik Thread-sert Kit/M94 Model M94 Thread-sert Kit contains the M900 Rivet Nut tool in a plastic case with 6-2, 8-2, 0-24, 0-2, /4-20, 5/6-8 and /8-6 mandrels and nosepieces, wrench and instructions. The kit contains 62 assorted Steel Klik Thread-serts: 0 each M5780, M57820, M5780, M57840, M57850; 6 each M5787, M5788. Weight:.25 lbs. Aluminum Klik Thread-sert Kit/M9 Model M9 Thread-sert Kit contains the M900 Rivet Nut tool in a molded plastic case with 6-2, 8-2, 0-24, 0-2, /4-20, 5/6-8 and /8-6 mandrels and nosepieces, wrench and instructions. The kit contains 62 assorted Aluminum Klik Threadserts: 0 each M5790, M57920, M5790, M57940, M57950; 6 each M5797, M5798. Weight: lbs. 6 AFSIndustrial.com

37 Rivet Nut Tools & Kits Quad Leg Nut Installation Tool (MJN-2/M904) New from Marson, the MJN-2 hand-held Quad Leg Nut Installation tool is designed to effortlessly set quad leg nuts and Jack Nuts in sizes ranging from #6-2 /4-20 and M4 M6. It works by threading the bolt to the quad leg nut, then dropping the component in the slot of the tool, inserting it into the pre-drilled hole, and squeezing until set. Tightening the exposed bolt completes the installation. NEW Jack Nut is a registered trademark of Stanley Engineered Fastening. 25RNK Kit/M4606 The M4606 / 25RNK kit comes complete with the heavy-duty 25RN Rivet Nut tool, mandrels and nosepieces to set 0-24",0-2", /4-20", 5/6-8" and /8-6" Rivet-Nuts, and service/adjustment tools all contained within a sturdy carrying case. Optional external thread adapters available. 25RN/M4604 Choose the M4604 for installing larger size Rivet Nuts. Model M4604 is a heavy-duty tool that will install 0-24 through /8"-6, and 5mm through 0mm threaded inserts in aluminum or steel. Quick-change mandrels, easily adjustable stroke. Supplied with /4"-20 mandrel and nosepiece only. Weight: 4.25 lbs. 425RN/M4607 Like the 25RN, the 425RN will install the full range of Rivet Nuts. It offers quick-change mandrels, easy adjust stroke, and a fast-action Push/Pull plunger that can be used to spin on and spin off rivet nuts for more speed. Supplied with ¼-20 mandrel and nosepiece only. Weight 4.5 lbs. 425RNK Kit/M4608 The M4008 / 425RNK kit comes complete with the heavy-duty 425RN Rivet Nut tool, mandrels and nosepieces to set 0-24",0-2", /4-20", 5/6-8" and /8-6" Rivet-Nuts, and service/adjustment tools all contained within a sturdy carrying case. Optional external thread adapters available. Mandrel/Nosepiece Chart for M4604 and M4607 Thread Size Mandrel No. Nosepiece No. Mandrel/Nosepiece Combo No. MET External Thread 0-24 M9565 M95645 M465 M M9566 M95645 M466 M466 /4-20 M9567 M95647 M467 M467 5/6-8 M9568 M95648 M468 M468 /8-6 M9569 M95649 M469 5mm M9560 M95640 M4625 M4645 6mm M956 M9564 M4626 M4647 8mm M9562 M95642 M4627 M4648 0mm M956 M9564 M4628 Mandrel/Nosepiece Chart for M460 Thread Size Mandrel No. Nosepiece No. Mandrel/Nosepiece Combo No. MET External Thread 0-24 M9565 M95645 M465 M M9566 M95645 M466 M466 /4-20 M9567 M95647 M467 M467 5/6-8 M9568 M95648 M468 M468 /8-6 M9569 M95649 M469 Mandrel/Nosepiece Chart for M46 Thread Size Mandrel No. Nosepiece No. Mandrel/Nosepiece Combo No. MET External Thread 5mm M9560 M95640 M4625 M4645 6mm M956 M9564 M4626 M4647 8mm M9562 M95642 M4627 M4648 0mm M956 M9564 M4628 7

38 Rivet Nut Tools & Kits New marson head 40-SP/M922 The 40-SP features advanced Spin/Pull action, along with,057 lbs. of pull force, in a smaller tool. Just hold the Rivet Nut onto the mandrel end and engage. The tool will automatically spin the nut on. Insert the Rivet Nut in the hole and pull the trigger to set the fastener. Then toggle to the bottom trigger and reverse spin the mandrel off. Easy installation in seconds. Comes supplied with inch mandrels and nosepieces 6-2" through /4-20" conveniently stored in a durable carry case. Mandrels and nosepieces for 4mm through 6mm can be purchased separately. Weight 4.9 lbs. Mandrel Nosepiece Chart for 40-SP/M922 Thread Size Mandrel No. Nosepiece No. 6-2 M88708 M M88709 M M8870 M M887 M8870 /4-20 M8872 M mm M8865 M mm M88652 M mm M8865 M SP/M9225 Featuring 6,59 lbs. of pull force, the new Marson 60-SP Spin/Pull rivet nut setting tool is our most powerful air/hydraulic rivet nut tool yet. Engage the rivet nut onto the mandrel, and the 60-SP automatically threads the fastener on the tool. Pressing and holding the trigger in position will set the rivet nut and reverse itself out automatically, all in one operation. This advanced tool features an adjustable stroke knob in the base of the tool to fully adjust stroke length to suit any grip range. Included is a swivel air inlet for increased mobility. For added convenience, adjustments and changes are performed outside the tool, with no required tear down to adjust the stroke or change thread sizes. Comes supplied with either all inch (M9225) or all metric (M9226) mandrels and nosepieces conveniently stored in a durable carry case. Weight 6 lbs. Mandrel Nosepiece Chart for 60-SP/M9225 Thread Size Mandrel No. Nosepiece No. 6-2 M74540 M M M M M M M74598 /4-20 M M /6-8 M M /8-6 M M74540 /2- M74540 M Metric Mandrel Nosepiece Chart for 60-SP/M9226 Thread Size Mandrel No. Nosepiece No. 4mm M7C00277 M7287 5mm M7C00278 M7288 6mm M7C00279 M7289 8mm M7C0054 M7290 0mm M7C0028 M729 2mm M777 M AFSIndustrial.com

39 Rivet Nut Tools & Kits Spin/Pull Tool Stoke Adjustment Follow these easy steps for correct tool stroke adjustment:. Measure and write down the overall length of Rivet Nut. 2. Write down the Maximum Grip Range of the Rivet Nut (reference catalog).. Subtract Material Thickness from Maximum Grip range. 4. Add the Pull-up Factor from chart at right for your existing thread size. 5. This will give you the correct stroke required to properly set the Rivet Nut. 6. To double check, set a Rivet Nut, measure length and subtract from length of a non-set Rivet Nut (#). Adjust tool stroke accordingly. Example: M5750 (¼-20) Rivet Nut Max Grip of Rivet Nut: (.080) Subtract Material Thickness: - (.060) ifference: (.020) Add Pull-up Factor for /4": + (.095) Equals required tool stroke: = (.5) Refer to page 9 for fractional breakdown of decimal. Pull-up Factor Chart per Thread Size Inch Metric M M M M6 -.5 / M / M / M / M SST Series The versatile, low cost, Spin/Spin pneumatic rivet nut production tool now comes with a quick-change nosepiece assembly and standard socket head cap screw for convenient replacement and change over. For added ease of operation, the Spin/Spin offers a superior ergonomic design, lightweight body, and operates without stroke adjustment. Available models come with 2 front assemblies of your choice (refer to table below). Additional nosepiece and mandrel sizes are available: SST-/M RPM SST-2/M RPM SST-/M RPM SST-4/M RPM Marson Spin/ 000 RPM 500 RPM 600 RPM 400 RPM Tool Model SST- SST-2 SST- SST-4 Thread Size Recommended Recommended Optional Recommended Optional Recommended /4-20 /4-28 5/6-8 5/6-24 /8-6 /8-24 M M4 M5 M6 M8 M0 OPERATOR IS LIABLE FOR CORRECT AIR PRESSURE. O NOT EXCEE 00 PSI. Purchasing the Optional Front End Assemblies are at the Owner s discretion. Care must be taken to optimize the tools Rivet Nut setting ability. Recommended for thin wall rivet-nuts only. Adjustment of the air pressure will be necessary in order for the tool to function in both minimum and maximum capacity on ALL optional thread sizes per tool. Available retrofit for MET external thread, contact customer service. 9