PURE WATER COMPONENTS

Transcription

1 PURE WATER COMPONENTS technology f l o w i n g y o u r w a y JUNE 2017 CALL FAX

2 Dear Valued Customers, Located in Columbus Georgia, Pure Water Components is a distributor of many fine water filtration products from industry-leading suppliers such as John Guest, Watts Water Quality and Conditioning Products, Omnipure, Parker/Liquifit, HM Digital, Pentek, Crystal Mountain, Aquatec, Aries and others. We specialize in prompt, courteous Customer Service and promise to do our best to get your orders shipped quickly and accurately. Most orders sent in by 3:00 pm Eastern Time will be shipped the same day and there is no minimum cost or quantity restrictions on your orders. Let Pure Water Components take care of all your water filtration products needs. The PWC Family Information for Ordering Payment Terms Payment is due within thirty (30) days from the date of invoice with prior credit approval. We also accept COD payments and Visa, Master Card, American Express and Discover credit cards at time of purchase. Delinquent accounts will be shipped COD until brought current. A 1.5% per month service charge will be applied to all accounts past due thirty days. Pricing Pricing is subject to adjustments to reflect Pure Water Components prices in effect at the time of shipment. Pure Water Components strives to maintain its pricing as published in the latest catalog, however, there are instances where price adjustments need to be made. Buyer shall pay for all local, state and federal taxes imposed on the products sold by Pure Water Components to Buyer. Shipping Standard shipping methods are UPS Ground and are F.O.B. Columbus, Georgia. All other shipping services are available upon request. Delivery Stock items are usually shipped within one day. Special orders, large orders, or items not in stock will require additional lead-time. Items out-of-stock are automatically backordered and shipped when received. Pure Water Components shall not be responsible for delays due to conditions beyond our control. Advice Advice or assistance given by Pure Water Components concerning our products is provided at the Purchaser s risk and Pure Water Components shall not be liable for any loss, damage or claim arising from said advice or assistance. Damaged /Shortage Claims Check shipments for damage before acceptance. Open your orders immediately and check for any concealed damage. Use your packing slip for shortage verification. Keep packing slip and original carton for claims purposes if damage or shortage has occurred. Shortage or damage claims need to be reported to us within five days of delivery. Consignee is responsible for filing a claim with the freight carrier for any and all damages or loss. Pure Water Components will help you with your damage claim report to the freight company. Returns All returns must be approved by Pure Water Components, Inc. and a Returns Goods Authorization (RGA) must be issued. We reserve the right to access a 15% restocking fee. Once an RGA is issued, merchandise is to be returned to Pure Water Components, Inc. freight prepaid. Verbal Orders We ask our customers to place all orders in writing. Verbal orders (and verbal changes to orders) will be accepted only with the understanding Pure Water Components, Inc. is not responsible to cover freight charges for returned merchandise placed by verbal order. Limited Warranty Some products sold by Pure Water Components have no warranty, or they are covered by the original manufacturer s warranty. Please contact Pure Water Components, Inc. for more information regarding warranties. May 2017

3 Contents COMPONENTS JOHN GUEST FITTINGS Polypropylene... 3 Acetal Copolymer... 6 Miscellaneous... 9 Check Valves... 4, 22 Brass... 8 Shut-Off Valves... 5,11,22 Plumbing CTS 1/2", 3/4", 1"... 10,11 Metric... 9 BRASS Compression Valves - Shut-Offs, Feed Water Supply... 13,19,22 PLASTIC Inserts, Delrin Sleeves (Ferrules)... 13,17 PVC Connectors... 14,15 Valves Shut Offs, Automatic, Pressure Regulators, Check Valves... 5,11,22 Nipples Garden Hose Connector Hose Barb Jaco TUBING JOHN GUEST LLDPE 1/4", 5/16", 3/8", 1/2", 4mm, 8mm Silicone Copper Drain Line INSTALLATION SUPPLIES Air Gaps, Drain Accessories,... 17,18 Automatic Shut-Off Valves Check Valves/Back Flow... 4,22 Drain Connectors - Adjustable Hose Clip Faucet Connectors - Braided Faucet Connectors - Plastic...4,8 Feed Water Saddle Valves Faucets Flow Restrictors... 19,20 Pressure Regulators Shut Off Valves, John Guest, Liquifit.5,22 LEAK CONTROLLERS & DETECTORS Aquagate Leak Detector Sensors PUMPS Booster, Transfer/Delivery, Permeate... 20,21 Pressure Switches, Transformers TESTING & MONITORING Pressure Gauges TDS Meters-In Line, Handheld Digital Thermometer Waterminder CLAMPS, CABLE CLIPS /TIES Cable Ties Worm Gear & Oetiker Clamps Nail Clips/Cable Clips LUBRICANTS, TAPE Silicone Grease, Haynes Lubricant... 23,35 Teflon Tape TOOLS Staple Clip Gun Tube Cutters... 9,11,23 RO SYSTEMS & WATER FILTRATION UNITS Automatic Shut-Off Valves Counter Top Systems... 25,35 Faucets Membranes Membrane Housings RO Systems - Residential, Water Cooler RO Systems, Commercial RO Tanks Under Counter/Counter Top Units ,35 UV Systems Whole House - Big Bubba, Scale Water Softeners..37 ACCESSORIES FOR RO & FILTRATION UNITS Brackets/Screws Clips Filter Housings... 28,29 Filter Housings, Whole House Filter Wrenches O-Rings FILTERS REFILLABLE CARTRIDGES CARBON Carbon Block... 29,30 GAC & Specialty... 30,31 Hydrotech Style Big Bubba SEDIMENT Melt Blown Pleated... 31,32 Wound Hydrotech Style Big Bubba IN LINE Carbon Block GAC & Specialty Sediment Shower Filters OMNIPURE FILTERS... 33,34 Omnipure K, E & Q Series Heads... 33,34 WATTS KWIK-CHANGE FILTERS... 34,35 PURLOGIX CARTRIDGES... 34,35 Filters 35 WATER COOLER PARTS Filter Clips, Fill Valve, UV Bulb, Cock Valves.. 35 WHOLE HOUSE SYSTEM Big Bubba Housing, Filters One Cartridge Tank Filtration System.. 36 Anti-Scale Control Systems 36 Water Softeners MEDIA..37 Call for products not listed (PURE)

4 Phone: , Toll Free: (PURE) FAX: , Toll Free: Sandy Parkway, Bldg. 1, Suite C, Columbus, GA BILL TO: COMPANY NAME PURCHASE ORDER FORM SHIP TO: COMPANY ADDRESS CITY STATE/ZIP PO NO.: PO DATE: PHONE: FAX: SHIP VIA: UPS Ground Truck UPS Air Other PAYMENT: Net 30 COD Credit Card AMEX/MC/DIS/VISA CARD NO: CID: EXP: (Credit Card billing address if different than Bill To address) - (May also phone orders and credit card information ) ITEM NO. DESCRIPTION QTY UNIT TOTAL PRICE Method of Payment is due in accordance with the term of each invoice. Buyer s Signature Date Total

5 PP POLYPROPYLENE FITTINGS Polypropylene Fittings (PP) of inch-size push-in fittings are available for tube sizes 1/4" O.D. to 1/2" O.D. Fittings are made of white polypropylene with EPDM food grade O-rings and are especially suitable for foodstuffs. Working pressures and temperatures: Water Max. 150 psi at 70 Max. 60 psi at 140 Tube OD = Quick Connect Dimension Part Number Description List ea MALE CONNECTOR (Tube OD x Male NPTF Thread) PP010821W 1/4" x 1/8" NPTF $ 1.47 PP010822W 1/4" x 1/4" NPTF $ 1.59 PP010823W 1/4" x 3/8" NPTF $ 2.20 PP011222W 3/8" x 1/4" NPTF $ 2.77 PP011223W 3/8" x 3/8" NPTF $ 2.77 PP011224W 3/8" x 1/2" NPTF $ 4.31 PP011623W 1/2" x 3/8" NPTF $ 3.74 PP011624W 1/2" x 1/2" NPTF $ 4.04 REDUCING TEE (Tube OD x Tube OD x Tube OD-Branch) PP W 3/8" x 3/8" x 1/4" $ 4.01 PP301612W 1/2" x 1/2" x 3/8" $ 5.30 UNION TEE (Tube OD ) PP0208W 1/4" $ 3.10 PP0212W 3/8" $ 3.79 PP0216W 1/2" $ 4.77 REDUCING ELBOW (Tube OD x Tube OD) PP211208W 3/8" x 1/4" $ 4.13 PP211612W 3/8" x 1/2" $ 5.11 UNION ELBOW (Tube OD) PP0308W 1/4" $ 2.45 PP0312W 3/8" $ 3.74 PP0316W 1/2" $ 4.46 REDUCING UNION (Tube OD x Tube OD) PP201208W 3/8" x 1/4" $ 2.98 PP201612W 1/2" x 3/8" $ 4.04 UNION CONNECTOR (Tube OD) PP0408W 1/4" $ 2.15 PP0412W 3/8" $ 2.92 PP0416W 1/2" $ 3.44 STEM ADAPTER (Stem OD x Male NPTF Thread) PP050821W 1/4" x 1/8" NPTF $ 0.76 PP050822W 1/4" x 1/4" NPTF $ 0.76 PP051222W 3/8" x 1/4" NPTF $ 0.93 PP051223W 3/8" x 3/8" NPTF $ 1.18 PP051624W 1/2" x 1/2" NPTF $ 1.94 REDUCER (Stem OD x Tube OD) PP061208W 3/8" x 1/4" $ 2.40 PP061612W 1/2" x 3/8" $ 4.59 PP062008W 5/8" (1/2" CTS ) Stem x 1/4" OD Reducer $ 4.50 PP062012W 5/8" (1/2" CTS ) Stem x 3/8" OD Reducer $ 4.67 PP062016W 5/8" (1/2" CTS ) Stem x 1/2" OD Reducer $ 4.78 * * See page 11 for other reducer fittings with Copper Tube Size (CTS)* * Call for products not listed PURE WATER COMPONENTS Call: (PURE) 3.

6 PP POLYPROPYLENE FITTINGS PROPER CONNECTION TO JOHN GUEST PUSH-IN FITTINGS PUSH PIPE INTO FITTING TO THE PIPE STOP TEST CONNECTION REMOVING TUBE REMOVE PIPE (2) Part Number Description List ea PLUG (Stem OD) PP0808W 1/4" $ 0.61 PP0812W 3/8" $ 1.00 PP0816W 1/2" $ 1.56 BULKHEAD UNION (Tube OD x Tube OD) ** PP1208W 1/4" x 1/4" $ 4.19 PP121208W 3/8" x 1/4" Reducing $ 5.23 PP1212W 3/8" x 3/8" $ 5.47 PP1216W 1/2" x 1/2" $ 8.43 **Polypropylene Bulkhead Unions are not intended for submerged use.** PUSH IN COLLET (1) Use TSPITOOL Page 9 PLUG IN ELBOW (Stem OD x Tube OD) PP220808W 1/4" x 1/4" $ 2.22 PP221208W 3/8" x 1/4" Reducing $ 3.02 PP221212W 3/8" x 3/8" $ 3.74 PP221616W 1/2" x 1/2" $ 4.58 FAUCET CONNECTOR (Tube OD x Female UNS Thread) PP3208U7W 1/4" x 7/16" -24 UNS (corresponds to 1/4" compression) $ 3.18 PP3212U7W 3/8" x 7/16" -24 UNS (corresponds to 1/4" compression) $ 3.28 FEMALE ADAPTOR - CONNECTOR (Tube OD x Female NPTF Thread) PP450821W 1/4" x 1/8" $ 4.81 PP450822W 1/4" x 1/4" $ 4.95 PP451222W 3/8" x 1/4" $ 5.11 PP451223W 3/8" x 3/8" $ 6.71 FIXED ELBOW (Tube OD x Male NPTF Thread) PP480821W 1/4" x 1/8" NPTF $ 2.17 PP480822W 1/4" x 1/4" NPTF $ 2.50 PP480823W 1/4" x 3/8" NPTF $ 2.97 PP481222W 3/8" x 1/4" NPTF $ 3.29 PP481223W 3/8" x 3/8" NPTF $ 3.38 THREE WAY DIVIDER (Tube OD Inlet x Tube OD Outlet) PP491208W 3/8" x 1/4" (x 3) $ 5.86 TWO WAY DIVIDER (Tube OD Inlet x Tube OD Outlet) PP2312W 3/8" $ 4.09 PP241208W 3/8" x 1/4" (x 2) $ 4.49 CHECK VALVES Part Number Description List ea CHECK VALVE (Tube OD x Tue OD) - John Guest Check Valves ensure protection against reversal of flow arrow with direction molded into plastic indicates direction of flow. For liquids only. Maximum pressure of 150 PSI at 68 F. Minimum temperature of 33 F. It is the customer s/user s responsibility that all products are properly installed and maintained and are used in accordance with technical specifications. NSF 51 and NSF 61 approved. Made of White Acetal Plastic. Check with your local inspector for code requirements. 14SCV 1/4" $ SCV 3/8" $ See Page 22 for other Check Valves 4. Fax: (RUSH) PURE WATER COMPONENTS Call for products not listed

7 SHUT-OFF VALVES John Guest valves are manufactured in white polypropylene with food grade EPDM O rings for use with potable water. The valves are not to be used with compressed air, explosive gases, petroleum spirits or other fuels, or for heating systems. For use with cold water supply ONLY. See John Guest PEI fittings for plumbing and heating systems( p.10-11). Working Pressures and Temperatures Water Max. 150 psi at 70 F (10 bar at 20 C) Max. 60 psi at 140 F ( 4 bar at 60 C) Min. 33 F/1 C 1 bar =14.5 psi (approx. NSF 51 NSF 61 NSF 51 NSF 61 Part Number Description List ea ANGLE STOP ADAPTER VALVE - Compression Male Thread x Compression Female Thread x Tube OD) Connects to riser and supply valve **LEAD FREE NICKEL PLATED BRASS ASVPP1LF 3/8" Male x 3/8" Female x 1/4" Tube, Lead Free $ ASVPP2LF 3/8" Male x 3/8" Female x 3/8" Tube, Lead Free $ **See Page 22 for Parker LIQUIFIT Angle stop Adapter Valves **PLASTIC, POLYPROPYLENE Maximum working pressure PASVPP1 3/8" Male x 3/8" Female x 1/4" Tube $ PASVPP2 3/8" Male x 3/8" Female x 3/8" Tube $ **LEAD FREE NICKEL PLATED BRASS WITH CONVERSION THREAD ADAPTER ASVPP5LF 1/2" Male/Female NPS x 3/8" Female x 1/4" Tube,LEAD FREE $ ASVPP6LF 1/2" Male/Female NPS x 3/8" Female x 3/8" Tube,LEAD FREE $ *Conversion Adapters can be threaded to either side of the valve to make configurations of 1/2" x 1/2" NPS (National Pipe Thread) or 3/8" x 3/8" Compression. Installation of Angle Stop Adapter Valve SHUT OFF VALVES SPEEDFIT TO SPEEDFIT (Straight - Tube OD x Tube OD) PPSV040808W 1/4" x 1/4" **Straight Quick Connect $ 6.26 PPSV041212W 3/8" x 3/8" to Quick Connect $ 6.65 **See Page 22 for Parker LIQUIFIT 1/4" and 3/8" Straight Shut Off Valves SHUT OFF VALVES - SPEEDFIT TO MALE NPTF (Straight - NPTF Thread x Tube OD) PPSV010822W 1/4" x 1/4" Male NPTF $ 7.02 PPSV011223W 3/8" x 3/8" Male NPTF $ 7.42 SVMC-06 Mounting Clips for 1/4" O.D. Straight Shut Off Valves $ 1.99 SVMC-10 Mounting Clips for 3/8" O.D. Straight Shut Off Valves $ 1.87 SHUT OFF VALVES SPEEDFIT TO FEMALE NPTF ELBOW (Tube OD x NPTF Thread) PPSV500822W 1/4" x 1/4" Female NPTF Elbow $ 7.74 PPSV501222W 3/8" x 1/4" Female NPTF Elbow $ 8.09 ACETAL SHUT-OFF VALVES John Guest PISV valves are manufactured in gray acetal copolymer with nitrile O rings. Specifically designed for compressed air and potable liquid, the valves are ideal for CO lines in beverage dispensing and for pneumatic applications. It is the customer s responsibility to ensure that the installations of John Guest fittings ² in CO applications are performed in accordance with the relevant industry and government safety guidelines. ² Working Pressures and Temperatures Air 150 psi at -4 F (10 bar at 20 C) Air/Potable Liquids Max. 150 psi at 33 F (10 bar at 1 C) NSF 51 Max. 150 psi at 73 F (10 bar at 23 C) NSF 61 Part Number Description List ea SHUT OFF VALVES SPEEDFIT TO SPEEDFIT LONG HANDLE (Straight Tube OD x Tube OD) PISV0416S 1/2" x 1/2" $ Call for products not listed PURE WATER COMPONENTS sales@pwcomponents.com 5.

8 PI ACETAL COPOLYMER FITTINGS Gray Acetal Copolymer Fitting (PI)-manufactured in tube sizes 5/32" OD to 5/8" OD with nitrile O-Rings; suitable for foodstuff, potable liquids, inert gases, CO2 lines, pneumatic applications and vacuum. NSF approved. Part Number Description List ea MALE CONNECTOR - NPTF (Tube OD x Male NPTF Thread) PI010821S 1/4" x 1/8" $ 1.56 PI010822S 1/4" x 1/4" $ 1.80 PM010822S 5/16" x 1/4" $ 1.81 PI010823S 1/4" x 3/8" $ 2.35 PM010823S 5/16"x 3/8" $ 2.61 PI011221S 3/8" x 1/8" $ 3.41 PI011222S 3/8" x 1/4" $ 2.56 PI011223S 3/8" x 3/8" $ 2.95 PI011224S 3/8" x 1/2" $ 4.58 PI011623S 1/2" x 3/8" $ 3.96 PI011624S 1/2" x 1/2" $ 4.27 REDUCING TEE - (Tube OD x Tube OD - Branch x Tube OD) PI301208S 3/8" x 1/4" x 3/8" $ 5.37 PI301612S 1/2" x 3/8" x 1/2" $ 5.61 UNION TEE - (Tube OD x Tube OD x Tube OD) PI0208S 1/4" $ 3.38 PM0208S 5/16" $ 3.47 PI0212S 3/8" $ 4.17 PI0216S 1/2" $ 5.05 REDUCING ELBOW - (Tube OD x Tube OD) PI211008S 5/16" x 1/4" $ 3.38 PI211208S 3/8" x 1/4" $ 4.40 PI211210S 3/8" x 5/16 $ 4.40 PI211610S 1/2" x 5/16 $ 5.19 PI211612S 1/2" x 3/8" $ 5.19 UNION ELBOW - (Tube OD) PI0308S 1/4" $ 2.64 PM0308S 5/16" $ 3.06 PI0312S 3/8" $ 3.96 PI0316S 1/2" $ 4.72 REDUCING UNION - (Tube OD) PI201008S 5/16" x 1/4" $ 2.56 PI201208S 3/8" x 1/4" $ 3.16 PI201210S 3/8" x 5/16" $ 3.21 PI201608S 1/2" x 1/4" $ 3.99 PI201612S 1/2" x 3/8" $ 4.27 UNION CONNECTOR - (Tube OD x Tube OD) PI0408S 1/4" $ 2.32 PM0408S 5/16" $ 2.48 PI0412S 3/8" $ 3.14 PI0416S 1/2" $ 3.64 CUT THE TUBE SQUARE - Cut the tube square and remove burrs and sharp edges. Make sure the outside diameter is free from score marks. For soft or thin-walled plastic tubing use tube inserts 6. PURE WATER COMPONENTS Call for products not listed

9 PI ACETAL COPOLYMER FITTINGS Part Number Description List ea STEM ADAPTER - (Stem OD x Male NPTF Thread) PI050621S 3/16"x 1/8" $ 0.80 PI050821S 1/4" x 1/8" $ 0.80 PI050822S 1/4" x 1/4" $ 0.80 PI050823S 1/4" x 3/8" $ 1.18 PM050822S 5/16" x 1/4" $ 0.80 PI051222S 3/8" x 1/4" $ 1.00 PI051223S 3/8" x 3/8" $ 1.32 PI051623S 1/2" x 3/8" $ 2.15 PI051624S 1/2" x 1/2" $ 2.15 STEM ENLARGER - (Stem OD x Tube OD) PI131216S 3/8" x 1/2" $ 3.16 STEM REDUCER - (Stem OD x Tube OD) PI061008S 5/16" x 1/4" $ 2.24 PI061208S 3/8" x 1/4" $ 2.56 PI061210S 3/8" x 5/16 $ 2.64 PI061612S 1/2" x 3/8" $ 4.86 PLUG - (Stem OD) PI0808S 1/4" $ 0.66 PM0808S 5/16" $ 0.98 PI0812S 3/8" $ 1.07 PI0816S 1/2" $ 1.60 END STOP - (Tube OD) PI4608S 1/4" $ 1.56 PI4612S 3/8" $ 1.93 BULKHEAD UNION - (Tube OD x Tube OD - Mounting hole diameter) PI1208S 1/4" x 1/4" " $ 4.44 PI121208S 3/8" x 1/4" " - Reducing $ 5.79 PI1212S 3/8" x 3/8" " $ 5.79 NC /2" x 1/4" " - Reducing $ 8.59 PI1216S 1/2" x 1/2" " $ 9.89 PLUG IN ELBOW - (Stem OD x Tube OD) PI220808S 1/4" x 1/4" $ 2.38 PM220808S 5/16" x 5/16" $ 3.01 PI221208S 3/8" x 1/4" $ 3.19 PI221212S 3/8" x 3/8" $ 4.05 PI221616S 1/2" x 1/2" $ 4.85 FIXED ELBOW - NPTF (Tube OD x Male NPTF Thread) PI480821S 1/4" x 1/8" $ 2.32 PI480822S 1/4" x 1/4" $ 2.64 PI480823S 1/4" x 3/8" $ 3.15 PI481222S 3/8" x 1/4" $ 3.96 PI481223S 3/8" x 3/8" $ 4.35 TWO-WAY DIVIDER - (Tube OD OUTLET X TUBE OD INLET) PI2308S 1/4" $ 3.77 PI2312S 3/8" $ 4.23 PI2316S 1/2" $ 7.22 THREE-WAY DIVIDER - (Tube OD INLET X TUBE OD OUTLET) PI491612S 1/2" x 3/8" (x 3) $ 9.65 Call for products not listed PURE WATER COMPONENTS Call: (PURE) 7.

10 PI ACETAL COPOLYMER FITTINGS Part Number Description List ea CROSS -(Tube OD) PI4712S 3/8" $ 7.35 TUBE TO HOSE STEM - (Stem OD x Barbed Hose ID) PI250808S 1/4" x 1/4" $ 1.48 PI251208S 3/8" x 1/4" $ 2.15 PI251210S 3/8" x 5/16" $ 2.32 PI251212S 3/8" x 3/8" $ 2.32 PI251216S 3/8" x 1/2" $ 3.14 PI251616S 1/2" x 1/2" $ 3.26 TUBE TO HOSE ELBOW - (Stem OD x Barbed Hose ID) PI290808S 1/4" x 1/4" $ 1.99 FAUCET CONNECTOR (TAP ADAPTER) - (Tube OD x Female UNS Thread) - Grey Acetal W/EPDM O-Ring CI3208U7S 1/4" x 7/16" UNS (screws into 1/4" compression) $ 2.97 CI3212U7S 3/8" x 7/16" UNS (screws into 1/4" compression) $ 3.31 FEMALE FLARE CONNECTOR-FFL - (Tube OD x Female Flare FFL Thread) PI4512F4S 3/8" x 1/4" FFL $ 3.27 PI4512F6S 3/8" x 3/8" FFL $ 3.99 FEMALE ADAPTER (CONNECTOR) Female NPTF Thread - (Tube OD x NPTF Thread) PI450822S 1/4" x 1/4" $ 3.65 PI451222S 3/8" x 1/4" $ 4.19 BRASS Part Number Description List ea NSF 51 NSF 61 BRASS FEMALE CONNECTOR (Tube OD x FFL Thread ) - Designed for use in coffee brewing equipment, dispensing and vending machine applications. The fittings are manufactured in brass with a polypropylene collet and a food grade EPDM O-ring. NSF 51 & 61 approved, Lead Free (LF). Not suitable for compressed air applications. MI4508F4SLF 1/4" x 1/4" (Corresponds to a 7/16-20 UNF) $ 7.59 MI4512F4SLF 3/8" x 1/4" (Corresponds to a 7/16-20 UNF) $ 7.91 MI4512F6SLF 3/8" x 3/8" (Corresponds to a 5/8-18 UNF) $11.57 BRASS FEMALE CONNECTOR (Tube OD x NH Thread) - GARDEN HOSE ADAPTER WITH NATIONAL HOSE THREAD - A plug-in elbow will provide a 90 connection able to be orientated in any direction NC2098LF 1/4" x 3/4" Female NH Thread, NSF 51 $ NC2258 3/8" x 3/4" Female NH Thread (Brass & Polypropylene) $ **See Page 14 for Plastic Garden Hose Connectors and Hose Y Connectors** MISCELLANEOUS Part Number Description List ea SHUT-OFF VALVE MOUNTING CLIP SVMC-06 Mounting Clip for 1/4" O.D. Valves $ 1.99 SVMC-10 Mounting Clip for 3/8" O.D. Valves $ 1.87 FLOW BEND CLIP (Tube OD) PM2610S 3/8" $ Fax: (RUSH) PURE WATER COMPONENTS Call for products not listed

11 MISCELLANEOUS Part Number Description List ea LOCKING CLIPS - (Tube OD) PIC1808R 1/4" $ 0.22 PMC1808R 5/16" & 8mm $ 0.26 PIC1812R 3/8" $ 0.25 PIC1816R 1/2" $ 0.29 COLLETT COVERS - (Tube OD) PI1908G 1/4" - Green $ 0.32 PI1912G 3/8" - Green $ 0.43 O-RINGS - Food Grade Nitrile and Food Grade EPDM CP-R081-S 1/4" - Nitrile $ 0.16 CP-R08M-S 5/16" and 8mm - Nitrile $ 0.20 CP-R121-S 3/8" - Nitrile $ 0.22 CP-R161-S 1/2" - Nitrile $ 0.30 CA-R08I-S 1/4" - EPDM $ 0.19 CA-R121-S 3/8" - EPDM $ 0.26 CA-R161-S 1/2" - EPDM $ 0.30 NO LONGER OFFERS COLLETS AS INDIVIDUAL COMPONENT PARTS. THE HALF CARTIRDGE IS AVAILABLE IN GREY ACETAL PLASTIC (PI). THE HALF CARTRIDGE INCLUDES THE COLLET, NITRILE O-RING AND BODY. PLASTIC HALF CARTRIDGES - Grey Acetal Body, Grey Acetal Collet, Nitrile O-Ring PI2808S 1/4" $ 1.40 PM2808W 5/16"" PM2808E 8 mm PI2812S 3/8" PI2816S 1/2" Call for Pricing and Availability PLASTIC HALF CARTRIDGES - White Polypropylene Body, White PP Collet, EPDM O-Ring PP2808W 1/4" Call for Pricing and Availability PP2812W 3/8" RELEASE TOOL TSPITOOL Collet Locking/Release Tool 1/4" - 3/8" $ 2.97 ICLT/2 Collet Locking/Release Tool 3/16, 1/4, 5/16, 3/8, 1/2 $ TUBE CUTTER (Cuts up to 12 mm tube) TSNIP Tube Cutter $ BLADES Tube Cutter Replacement Blades $ 4.58 See page 23 for more plastic tube cutters. PIPE CUTTER WITH V-POINT BLADE (Cuts up to 22 mm pipe) JG-TS Pipe Cutter, Suitable for Plastic, Rubber, Nylon Pipe $ JG-HDC Heavy Duty Pipe Cutter $ BLADES JGHDC Blade Replacement - Heavy Duty Pipe Cutter $ METRIC FITTINGS Call for John Guest metric-size push-in fittings and tubing. Manufactured in black acetal copolymer with food grade nitrile O-rings for tube sizes 4 mm O.D. to 28 mm O. D. Especially produced for foodstuff and potable liquids. They are equally suitable for air and inert gases and can be used for CO2 lines, pneumatics applications and vacuum. See Page 12 for metric LLDPE tubing. Call for products not listed PURE WATER COMPONENTS 9.

12 PUSH FITS - For Plumbing and Heating Systems John Guest Push Fit is for the plumbing of hot & cold water services and central heating applications, including pressurized systems. These Speed-Fit Twist and Lock fittings have been designed for use with Copper Pipe, CPVC and PEX. Fittings indicate copper pipe ID. Call for The Push-Fit Solution for Plumbing and Heating Systems Catalog. Leak-Proof Seal What not to do Do not use damaged or scored pipe Do not use hacksaw to cut pipe Do not leave burrs on end of pipe Do not forget to push the pipe fully into the fitting, past both the collet (gripper) and the 0-Ring Twist and Lock feature gives added security with greater compression on the o-ring, as pipe is locked in place. IAPMO Uniform Plumbing Code Working Pressures and Temperatures Application Max. Pressure Max. Temperature Water 160 psi 73 Water 100 psi 180 Water 80 psi 200 NSF14 NSF61 CTS (Copper Tube Size) - Dimensional description 1/2" CTS = 5/8" OD is the inside dimension of the tube (1/8" less than the Conversion to OD 3/4" CTS = 7/8" OD actual outside diameter of tube). 1" CTS = 1 1/8" OD JOHN GUEST SPEED-FIT CTS TWIST AND LOCK FITTINGS FOR PLUMBING & HEATING SYSTEMS - 1/2", 3/4", 1" Part Number Description List ea Use End Cap as a temporary cap off for pressure test. PSEI4620 1/2" CTS End Cap $ 4.21 PSEI4628 3/4" CTS End Cap $ 5.31 PSEI4636 1" CTS End Cap $ 8.53 PSEI /2" CTS x 1/2" NPT Male Connector $ 5.10 PSEI /2" CTS x 3/4" NPT Male Connector $ 5.77 PSEI /4" CTS x 3/4" NPT Male Connector $ 6.50 PSEI " CTS x 3/4" NPT Male Connector $ 9.35 PSEI " CTS x 1" NPT Male Connector $ Due to 2014 No Lead Legislation, only no lead John Guest brass parts are sold that meet the no lead specifications MW LF 1/2" CTS x 1/2" NPT Male Connector, No Lead Brass $ 9.44 MW LF 1/2" CTS x 3/4" NPT Male Connector, No Lead Brass $ 9.38 MW LF 3/4" CTS x 3/4" NPT Male Connector, No Lead Brass $17.09 PEI0420 PEX 1/2" CTS Union Connector $ 5.14 PEI0428 PEX 3/4" CTS Union Connector $ 6.76 PEI0436 PEX 1" CTS Union Connector $13.11 PEI PEX 3/4" CTS x 1/2" CTS Reducing Union $ 6.53 PEI PEX 1" CTS x 3/4" CTS Reducing Union $ 9.62 PSEI /4" CTS x 3/4" NPT Female Connector $ PEI0320 PEX 1/2" CTS Union Elbow $ 5.89 PEI0328 PEX 3/4" CTS Union Elbow $ 8.86 PEI0336 PEX 1" CTS Union Elbow $ PEI PEX 3/4" CTS x 1/2" CTS Reducing Elbow $ PSEI /2" CTS x 1/2" NPT Male Fixed Elbow $ Fax: (RUSH) PURE WATER COMPONENTS Call for products not listed Cont.

13 PUSH FITS - For Plumbing and Heating Systems JOHN GUEST SPEED-FIT TWIST AND LOCK FITTINGS FOR PLUMBING & HEATING SYSTEMS - 1/2", 3/4", Part Number Description List ea PEIBTC2034 PEX 1/2" CTS x 1/2" NPS Female Swivel Elbow $ 7.02 PEI PEX 1/2" CTS Plug In Elbow (Swivel Type Connection) $ 4.13 PEI PEX 3/4" CTS Plug In Elbow (Swivel Type Connection) $ 5.78 PP062008W 5/8" (1/2" CTS ) Stem x 1/4" OD Reducer $ 4.50 PP062012W 5/8" (1/2" CTS ) Stem x 3/8" OD Reducer $ 4.67 PP062016W 5/8" (1/2" CTS ) Stem x 1/2" OD Reducer $ 4.78 NSF 61 PEI PEX 7/8" (3/4" CTS ) Stem x 1/2" CTS Reducer $ 5.80 PEI PEX 1 1/8" (1" CTS ) Stem x 3/4" CTS Reducer $ 7.68 PEI0220 PEX 1/2" CTS Union Tee $ 6.04 PEI0228 PEX 3/4" CTS Union Tee $ PEI0236 PEX 1" CTS Union Tee $ PEI3028A PEX 3/4" x 3/4" x 1/2" (Branch) CTS Reducing Tee $ 9.57 PEI3028B PEX 3/4" x 1/2" x 1/2" (Branch) CTS Reducing Tee $ 8.83 PEI3028C PEX 1/2" x 1/2" x 3/4" (Branch) CTS Reducing Tee $ 8.83 PEI3028D PEX 3/4" x 1/2" x 3/4" (Branch) CTS Reducing Tee $ 9.57 NC2390 1/2" CTS x 1/2" CTS Straight Shut Off Valve, Acetal Plastic $ Product not IAPMO/UPC Listed) NC2391-RH 1/2" CTS By-Pass Valve, Right Hand, Acetal Plastic $ NC2391-LH 1/2" CTS By-Pass Valve, Left Hand, Acetal Plastic $ Product not IAPMO/UPC Listed NSF 61 NSF 61 PSEISV20 P 1/2" CTS x 1/2" CTS Shut Off Valve $ PSEISV28 P 3/4" CTS x 3/4" CTS Shut Off Valve $ TS120 1/2" CTS Pipe Insert $ 0.50 TS128 3/4" CTS Pipe Insert $ 0.74 TS136 1" CTS Pipe Insert $ 1.48 John Guest recommends the use of pipe inserts for PEX pipe connections with John Guest Speedfit Products in Standard Residential Plumbing (hot and cold water) installations and requires the use of pipe inserts for plastic pipe connections with John Guest Speedfit products in all Heating installations. JG HDC Heavy Duty Pipe Cutter $ BLADES JGHDC Blade Replacement Heavy Duty Pipe Cutter $ JG-TS Pipe Cutter $ See Page 23 for copper tubing cutter DO NOT USE PUSH-FIT PLUMBING PRODUCTS FOR GAS, FUEL OIL OR COMPRESSED AIR APPLICATIONS Speedfit products comply with the applicable sections of the latest edition of the Uniform Plumbing Code and the International Plumbing Code, including behind-the-wall installations. Refer to the applicable code listings for the latest information. Speedfit products are manu-factured in compliance with ASTM F and CSA B Speedfit products have NSF/ANSI Standard 14 which demonstrates compliance with USA Plumbing Codes, cnsfus which complies with Canada and US Standards, CSA Canadian Standards, pw potable water, rfh radiant floor heating, and NSF Standard 61 Certification for Drinking Water System Components and Materials which contact drinking water. NSF 61 Call for products not listed PURE WATER COMPONENTS Call: (PURE) 11.

14 TUBING - POLYETHYLENE The John Guest PE Range of plastic tubing is produced in Linear Low Density Polyethylene for cold and intermittent hot water applications with FDA approved materials and is NSF International Standard 51 & 61 certified. John Guest Black LLDPE tubing is UV stabilized and can be exposed to direct ultraviolet light (e.g. direct sunlight). Other colors of John Guest tubing are not UV stabilized and can not be exposed to direct ultraviolet light. Part Number Description List ea JOHN GUEST LLDPE TUBING - 1/4" PE TUBING - 500'/ROLL-OD 1/4", ID-.170" PE-08-BI-0500F-W White $ PE-08-BI-0500F-B Blue $ PE-08-BI-0500F-E Black $ PE-08-BI-0500F- Red (R), Orange (O), Green (G), Yellow (Y) Natural (N) Violet (V) JOHN GUEST LLDPE TUBING - 5/16" PE TUBING - 500'/ROLL-OD 5/16", ID-0.187" JOHN GUEST LLDPE TUBING - 3/8" PE TUBING - 500'/ROLL-OD 3/8", ID 0.25" JOHN GUEST LLDPE TUBING - 1/2" PE TUBING - 250'/ROLL - OD 1/2", ID 0.375" JOHN GUEST LLDPE TUBING - 4mm & 8mm PE TUBING - 100m/ROLL $ PE-10-CI-0500F-E Black $ PE-10-CI-0500F-R Red $ PE-10-CI-0500F-N Natural $ PE-12-EI-0500F-W White $ PE-12-EI-0500F-B Blue $ PE-12-EI-0500F-E Black $ PE-12-EI-0500F- Red (R), Orange (O), Green (G), Yellow (Y) $ PE-16-GI-0250F-W White $ PE-16-GI-0250F- Blue (B), Black (E), Natural (N) $ PE M- Blue (B), Black (E), Natural (N) 4mm OD x 2.5mm ID $ PE M- Blue (B), Black (E), Natural (N) 8mm OD x 6mm ID $ NSF 51 NSF 61 SPECIALTY TUBING FLEX-TUBE-TB 1/4 Flexible Tubing Coil, 15ft Length - Retracts to 16, Transparent Blue (Install with NL Brass Inserts) TUBING - POLYETHYLENE $ SILICONE TUBING TUBING - SILICONE SIL38-SPT 3/8" OD - 1/4" ID, - 80 F to 500 F, Sani-Tech Clear Platinum Call for Pricing Per Foot SIL58-SPT 5/8" OD - 3/8" ID, -80 F to 500 F, Sani-Tech Clear Platinum Call for Pricing Per Foot /16 OD x 5/16 ID, -80 F to 500 F Sani-Tech Silicone Tubing Call for Pricing Per Foot COPPER TUBING Call for Tubing OD 100' Coils, 1/4", Soft Refrigeration Tubing TUBING - COILS Call for pricing DRAIN TUBING TUBING - COILS Part Number Description List ea UP-86BK100 1/2" OD x 3/8" ID. 100'/Roll, Black Polyethylene $ UP-106BK100 5/8" OD x 1/2" ID, 100'/Roll, Black Polyethylene $ UP BK 3/4" OD x 5/8" ID, 100'/Roll, Black Polyethylene $ PURE WATER COMPONENTS Call for products not listed

15 BRASS FITTINGS COMPRESSION Do to the no lead legislation of 2014, all brass parts that are used for potable water meet the standards of not more than 0.25 percent lead when used with respect to the wetted surfaces of pipes, pipe fittings, plumbing fittings and fixtures coming in contact with potable water. INSERTS BRASS NL 1/4" Brass $ NL 3/8" Brass $ 0.29 NUTS BRASS /4" Brass $ /8" Brass $ /2" Brass $ 0.93 SLEEVES BRASS /4" Brass $ /8" Brass $ /2" Brass $ 0.30 CAP NUT BRASS NL 1/4" $ NL 3/8" $ NL 1/2" $ 2.17 DELRIN SLEEVES (FERRULES) - PLASTIC /4" - Plastic $ /8" - Plastic $ /2" - Plastic $ 0.40 INSERTS- PLASTIC INS - 14 Tube Insert for 1/4" OD Tubing $ 0.12 INS - 38 Tube Insert for 3/8" OD Tubing $ 0.16 NP8 Tube Insert for 1/2" - Nylon, Jaco $ 0.40 Female Adapters BRASS ADAPTERS CCA46NL Female Adapter - 3/8" Female Comp. to 1/4" Tube Comp. $ NL Female Adapter - 1/4" FPT to 1/4" Tube Comp. $ 2.09 Male Adapt NL Male Adapter - 1/4" MPT to 1/4" Tube Comp. $ NL Male Adapter - 3/8" MPT to 1/4" Tube Comp. $ NL Male Adapter - 1/2" MPT to 1/4" Tube Comp. $ NL Male Adapter - 3/8" MPT to 3/8" Tube Comp. $ 2.74 ELBOWS NL 1/4" Comp x 1/4" Comp, Union Elbow $ NL 1/4" Comp x 1/4" MPT $ 6.36 TEES NL 1/4" x 1/4" x 1/4" $ NL 3/8" x 3/8" x 3/8" $ NL 3/8" x 3/8" x 1/4" Reducing $ 6.56 UNION NL 1/4" x 1/4" $ NL 3/8" x 3/8" $ NL 1/4" x 3/8" Reducing $ 3.57 BRASS FITTINGS VALVES NEEDLE VALVE - - Call For Valve Sizes Not Listed NL 1/4" C x 1/4" C, Needle Valve (Straight) $ NL 3/8" C x 3/8" C, Needle Valve (Straight) $ 8.77 Cont. Call for products not listed PURE WATER COMPONENTS Call: (PURE) 13.

16 PLASTIC FITTINGS GARDEN HOSE CONNECTOR GARDEN HOSE CONNECTOR - (Quick Connect x Garden Hose Thread, Black PP, Dual EPDM O-rings, Lead Free) U /4" FGHT x 1/4" QC, Garden Hose Connector W/Quick Connect, Plastic $ 5.78 U /4" FGHT x 3/8"QC, Garden Hose Connector W/Quick Connect, Plastic $ /4" FGHT x 3/4" MGHT (x 2), Garden Hose Y Connector, Plastic $ 5.25 See page 8 for John Guest Brass Garden Hose Connectors PLASTIC FITTINGS PVC - VALVES SCHEDULE 80 SHUT-OFF BALL VALVES - EPDM Seal & O-ring, Fits both Sch. 40 & 80 pipe, Rated for 150 psi at 73, NSF /2" FPT x 1/2" FPT $ /4" FPT x 3/4" FPT $ " FPT x 1" FPT $ /2" FPT x 1 1/2" FPT $ /2" Slip x 1/2" Slip $ /4" Slip x 3/4" Slip $ " Slip x 1" Slip $ PLASTIC FITTINGS PVC - SCHEDULE 40 ADAPTERS - Female (Slip x FPT) /2" x 1/4" (REDUCING) $ /2" x 3/8" (REDUCING) $ /2" x 1/2" $ /4" x 3/4" $ 1.00 ADAPTERS - Male (MPT x Slip) /2" MPT x 1/2" Slip $ /4" MPT x 3/4" Slip $ " MPT x 1" Slip $ " MPT x 1/2" Slip $ /4" MPT x 1" Slip $ T 1 1/4" MPT x 1" FPT $ 7.02 BUSHING - Female (SP x FPT) /4" x 1/2" $ " x 1/2" $ /2" x 1/4" $ /2" x 3/8" $ 1.54 BUSHING - (SP x Slip) /4" x 1/2" $ " x 1/2" $ " x 3/4" $ /4" x 1/2" $ /4" x 3/4" $ /4" x 1" $ 1.90 CAP - (Slip) /2" $ /4" $ 0.73 COUPLING (Slip x Slip) (FPT x FPT) /2" Slip x 1/2" Slip $ /4" Slip x 3/4" Slip $ /2" FPT x 1/2" FPT $ /4" FPT x 3/4" FPT $ Call: (PURE) PURE WATER COMPONENTS Call for products not listed

17 PLASTIC FITTINGS PVC - SCHEDULE 40 ELBOWS - 45 (Slip x Slip) /2" $ /4" $ 1.80 ELBOWS - 90 (Slip x Slip) and (Slip x FPT) TS (Thread x Slip) /2" Slip x Slip $ /4" Slip x Slip $ TS 1/2" Slip x FPT $ TS 3/4" Slip x FPT $ TS 1 Slip x FPT $ TS 1 1/4" Slip x FPT $ TS 1 1/2" Slip x FPT $ /8" x 3/8" - FPT x FPT Schedule 80 (Grey) $ 8.71 TEE - (Slip x Slip x Slip) ) /2" x 3 (Slip) $ /4" x 3 (Slip) $ /4" x 1/2" x 3/4" Reducing Tee (Slip) $ 1.17 TEE - (Slip x FPT x Slip Thread in Middle) TS 1/2" (Slip, FPT, Slip) $ TS 3/4" (Slip, FPT, Slip) $ TS 1" (Slip, FPT, Slip) $ 3.33 PLASTIC FITTINGS NIPPLES - (MPT x Length) W 1/4" x 1 1/4", Nylon $ 0.81 NP /4" x 1 1/2, PVC Schedule 80 $ 1.48 NP /4" x 2 1/2", PVC Schedule 80 $ 1.94 NP /8" x 1 1/2", PVC Schedule 80 $ 1.84 NP /2 x 2, PVC Schedule 80 $ 1.41 NP /2" x 2 1/2", PVC Schedule 80 $ 1.91 NP /4" x 2", PVC Schedule 80 $ 2.50 NP /4" x 2 1/2", PVC Schedule 80 $ 2.50 NP " x 3", PVC Schedule 80 $ 4.42 PLASTIC NIPPLES PLASTIC FITTINGS PLASTIC COUPLINGS, BUSHINGS INSERTS AND DELRIN SLEEVES (FERRULES) - Plastic - To order **See Page 13 - Brass Compression parts COUPLING - (FPT x FPT) (W) White Nylon (B) Black Polyethylene (P) Polypropylene W 1/4" $ W 3/8" $ W 1/2" $ W 3/4" $ W 3/4" x 1/2" (Reducing) $ 6.93 BUSHING - Reducer (MPT x FPT) Hex W 3/8" x 1/4" $ W 1/2" x 1/4" $ W 1/2" x 3/8" $ P 1/2" x 3/8" $ W 3/4" x 1/4" $ W 3/4" x 3/8" $ W 3/4" x 1/2" $ W 1" x 1/2" $ W 1" x 3/4" $ 2.91 Call for products not listed PURE WATER COMPONENTS 15.

18 PLASTIC FITTINGS PLASTIC NIPPLES & PLUGS HEX NIPPLES (MPT x MPT) P 1/4" x 1/4" $ W 1/4" x 1/4" $ W 3/8" x 3/8" $ P 3/8" x 3/8" $ W 1/2" x 1/2" $ W 1/4" x 1/8" (Reducing) $ B 3/8" x 1/8" (Reducing) $ W 3/8" x 1/4" (Reducing) $ W 1/2" x 1/4" (Reducing) $ W 1/2" x 3/8" (Reducing) $ W 3/4" x 1/2" (Reducing) $ W 3/4" x 3/8" (Reducing) $ 1.04 HEX HEAD PLUG - (MPT) W 1/8" $ W 1/4" $ W 3/8" $ W 1/2" $ W 3/4" $ 1.23 PLASTIC FITTINGS PLASTIC HOSE BARB MALE ADAPTER - (Barb x MPT) Barb (Hose ID) (W) White Nylon (B) Black Polyethylene (P) Polypropylene W 1/4" x 1/4" $ W 3/8" x 3/8" $ W 3/8" x 1/2" $ W 1/2" x 1/2" $ W 1/2" x 3/4" $ 1.50 CONNECTOR / UNION / SPLICER - (Barb x Barb) W 1/4" x 1/4" $ W 3/8" x 3/8" $ W 1/2" x 1/2" $ W 1/2" x 3/8", Reducing $ 1.08 ELBOWS - (Barb x Barb) W 1/4" x 1/4" $ W 3/8" x 3/8" $ W 1/2" x 1/2" $ B 5/8" x 5/8" $ 1.94 ELBOWS - (Barb x MPT) B 1/4" x 1/8" $ W 1/4" x 1/8" $ B 1/4" x 1/4" $ W 1/4" x 1/4" $ W 3/8" x 3/8" $ W 1/2" x 3/8" $ W 3/8" x 1/2" $ P 1/2" x 1/4" $ W 1/2" x 1/4" $ B 1/2" x 1/2" $ 1.84 TEES - (Barb x Barb x Barb) W 1/4" x 1/4" x 1/4" $ W 3/8" x 3/8" x 3/8" $ W 1/2" x 1/2" x 1/2" $ B 1/2" x 1/2" x 1/2" $ PURE WATER COMPONENTS Call for products not listed

19 PLASTIC COMPRESSION JACO JACO fittings are used with plastic, copper and aluminum tubing. NUTS & INSERTS N-04W 1/4" Compression, Nylon Nut $ 0.43 N-06W 3/8" Compression, Nylon Nut $ 0.62 NPG8 1/2" W/Plastic Gripper, PP Nut $ 1.26 NP8 1/2", Nylon Insert $ 0.42 FEMALE ELBOW - (Tube x FPT - Nylon) N-O 1/2" x 1/2" $ 3.47 FEMALE CONNECTOR - (Tube x FPT- Nylon) N-0 1/4" x 1/4" $ N-0 3/8" x 1/4" $ N-0 3/8" x 3/8" $ 2.67 MALE ELBOW - (Tube x MPT - Nylon) N-0 1/4" x 1/8" $ N-0 1/4" x 1/4" $ N-O 1/4" x 3/8" $ N-O 3/8" x 1/4" $ N-O 1/2" x 1/4" $ N-0 1/2" x 1/2" $ N-PG 1/2" x 1/2" W/Plastic Gripper $ 3.59 UNION ELBOW - (Tube x Tube - Nylon) 50-4-N-0 1/4" x 1/4" $ N-0 3/8" x 3/8" $ 2.59 MALE CONNECTOR - (Tube x MPT - Nylon) N-0 1/4" x 1/4" $ N-0 1/4" x 3/8" $ N-0 3/8" x 3/8" $ N-0 1/2" x 1/4" $ N-0 1/2" x 1/2" $ 2.79 UNION CONNECTOR - (Tube x Tube - Nylon) 15-4-N-0 1/4" $ N-0 3/8" $ N-0 1/4" x 3/8" (Reducing) $ 1.65 BULKHEAD UNION - (Tube x Tube- Nylon) N 1/4" x 1/4" $ 2.86 TEE - (Tube x Tube x Tube - Nylon) 70-4-N-0 1/4" x 1/4" x 1/4" $ N-0 3/8" x 3/8" x 3/8" $ N-0 1/2" x 1/2" x 1/2" $ 5.06 INSTALLATON SUPPLIES DRAIN ACCESSORIES 31-SC AIR GAP - Gap-A-RO - Plumbing Code Listed - Gap-A-RO is a compact plumbing code air gap with convenient mounting arrangement and cover for RO type water coolers. Provides back-siphonage protection. 31-SC Air Gap for RO Systems W/1/4" Inlet & 3/8" Outlet, W/Cover $ SA 31-SB 31-SA 31-SB Air Gap for RO Systems W/3/8" Inlet & Outlet, No Cover Air Gap for RO Systems W/1/4" Rt. Angle Inlet & 3/8" Outlet, $ $ SD 31-SD Air Gap, Sink Mount, 1/4" Inlet, 3/8" Outlet, White Plastic $ Call for products not listed PURE WATER COMPONENTS sales@pwcomponents.com 17.

20 INSTALLATON SUPPLIES DRAIN ACCESSORIES COMBINATION AIRGAP Duel Inlet/High Flow for Dishwasher, RO, Water Softeners. True 1" vertical air gap open to atmosphere, fully assembled, dual application, other quick connect dimensions available. TAG-25QC TAG-25QC DLA-TAG, 1/2"MIPT x 1/4" Quick Connect, Twin Inlet Dishwasher Airgap accommodates flow rates from high output RO membranes without the need of an airgap faucet. All parts included for dual application. IAPMO/UPC & IPC Listed $ TAGEC End Cap, 1/2" I.D. x 1" Black Vinyl ( Cap for single application) $ 0.45 TAGDM-5025 Male Connector, 1/2"MIPT x 1/4"White PP Quick Connect $ 1.79 G-150 G-200 G-38QCA MULTIPURPOSE AIRGAP DRAIN LINE ADAPTER - Designed for residential and commercial water treatment equipment and condensate lines that require an air gap discharge to the drain. IAPMO/UPC & IPC Listed. Installs onto 2" ABS or PVC Schedule 40 standpipe. Use approved ABS to PVC transition cement (NSF Certified, ASTM D 3138) when connecting to PVC pipe. G-150 DLA-G15, 1/2" FPT Inlet (on top) x 1 1/2" OUTLET, 2 of vertical $ airgap, Installs onto 1 1/2" ABS or PVC Sch-40 standpipe or fits into hub/socket of 2" ABS or PVC Sch-40 fitting G-200 DLA-G20, 1" Female Thread Inlet x 2" OUTLET, 2"of vertical air gap $ Installs onto 2" ABS or PVC Sch-40 standpipe G-38QCA DLA-G, 3/8 QC and 2 ABS Trap Adapters provided connections to 2" standpipe configuration, 2 "of vertical air gap $ DRAIN LINE ADAPTERS FOR REVERSE OSMOSIS 9-38QC DLA-9, 1 1/2" S. J. x 3/8" QC, DLA-9 provides a RO drain connection specifically for use with a garbage disposal and single compartment sink $ QC DLA-12, RO Drain Line Adapter Kit, 3/8" QC, DLA-12 can be used anywhere a drain saddle is typically installed undercounter, provides a solid connection. $ D-38QC DLA-D, Universal wye Adapter W/dishwasher comes in kit form w/all fittings, 1 Drain Line Adapter w/push-in connection or Barb Insert, 1 Hose Coupler, 2 Marine Stainless Steel Hose Clamps. Accommodates 1/2", 5/8", 3/4", 7/8" dishwasher drain line connection. $ Drain-Boa DC7900 Drain-Boa Rubber Coupling, Fits around 1 1/2" Pipe, 3/8"- 1/2"Drain Line, Black $ DRAIN CONNECTORS - ADJUSTABLE, PLASTIC, SADDLE PADS FI-19-1/4 Adjustable Hose Clip Drain Connector w/ 1/4" Comp., SS W/Brass $ 9.53 FI-19-3/8 Adjustable Hose Clip Drain Connector w/ 3/8" Comp., SS W/Brass $ W /2" x 3 1/4", 9 16" Width, Extender, Stainless Steel $ 4.85 (Drain Connectors Listed Below Fit Standard 1" - 1 1/2" Pipe ) PDC-Q14W 1/4" QC, Plastic, White $ 3.43 PDC-Q38W 3/8" QC, Plastic, White $ 3.90 PWDC-14QC 1/4" QC, Plastic, Black $ 3.43 PWDC-38QC 3/8" QC, Plastic, Black $ 3.90 PWDC-14M 1/4" Male Jaco Nut, Plastic, Black $ 1.56 PWDC-38M 3/8" Male Jaco Nut, Plastic, Black $ 1.62 DS-P Drain Saddle Pad $ Fax: (RUSH) PURE WATER COMPONENTS Call for products not listed

21 INSTALLATON SUPPLIES MISCELLANEOUS SV-1NL SVBV-14 FEED WATER SUPPLY VALVES SV-1-NL 1/2" MPT x 1/2" FPT x 1/4" Compression, Brass, No Lead $ SVBV-14 1/2" FPT x 1/2" MPT x 1/4" QC Valve (John Guest), Plastic $ SV-3NL SV-3-NL 1/4" Compression, Self Piercing, Bolt Style, Threaded bottom bracket, molded gasket, Fits 3/8"-1 1/4" Pipe, Brass, No Lead $ 7.49 SV-6-NL SV-6-NL 1/4" Compression, Self Piercing, C Clamp Style, Fits 3/8"- 5/8" Pipe, Brass, No Lead $ 9.74 JG Faucet Connector John Guest - Faucet Connector - #CI3208U7S & CI3212U7S, Acetyl Plastic See Page 8 John Guest - Faucet Connector - #PP3208U7W & PP3212U7W, Polypropylene See Page 4 Faucet Adapter (Plastic) FEED WATER SUPPLY FT-05-P-14QC Faucet Adapter 1/2"FPTx 1/2" MPT x 1/4 QC", PP Plastic $ 3.42 MAX -4NL 3/8" Male C x 3/8" Female C x 1/4" Outlet Comp, No Lead $ 7.50 MAX-6NL 3/8" Male C x 3/8" Female C x 3/8" Outlet Comp., No Lead $ 7.70 MAX Adapter No Lead Brass MAX-88C4-NL 1/2" Male C x 1/2" Female C x 1/4" Outlet Comp., No Lead $ MAX-88P4-NL 1/2" MPT x 1/2" FPT x 1/4" Outlet Comp. No Lead $ 9.37 Attach John Guest Faucet Connector to 1/4" compression thread to change connection to 1/4" quick connect. STAINLESS STEEL BRAIDED FAUCET CONNECTORS - Certified Lead Free BSS 3/8" Female OD Comp x 1/2" FPT, 12" Long $ BSS 3/8" Female OD Comp x 1/2" FPT, 16" Long $ BSS 3/8" Female OD Comp x 1/2" FPT, 20" Long $ OWSS 3/8" Female C x 3/8" Female C, 20" Long $ FLOW RESTRICTORS All reverse osmosis units use flow restrictors to apply back pressure to the membrane for production of purified water and delivery to the storage tank, and to maintain a desired ratio of drain flow to product flow. The flow restrictor must be sized to fit the RO membrane GPD for correct flow rate. A ratio of drain water to the flow water of the membrane is about 3-4 gals to 1 gal. The ratio can vary as TDS, temperature, pressure and other variables affect the flow rate to drain. FLOW RESTRICTORS Capillary Tube Flow Restrictors W/ 1/4" Quick Connect FLOW ml/min (93 GPD) for 25 GPD RO Membrane $ FLOW ml/min (111 GPD) for 35 GPD RO Membrane $ FLOW ml/min (139 GPD) for 50 GPD RO Membrane $ FLOW ml/min (211 GPD) for 75 GPD RO Membrane $ FLOW RESTRICTORS Capillary Inserts for tubing FRCT ml/min for 25 GPD RO Membrane, Black $ 3.60 FRCT ml/min for 35 GPD RO Membrane, Yellow $ 3.60 FRCT ml/min for 50 GPD RO Membrane, Green $ 3.60 FRCT ml/min for 75 GPD RO Membrane, Blue $ 3.60 FRCT ml/min for 100 GPD RO Membrane, White $ 3.60 Call for products not listed PURE WATER COMPONENTS Call: (PURE) 19.

22 INSTALLATION SUPPLIES MISCELLANEOUS FLOW RESTRICTORS Insert Flow Restrictors to fit John Guest Fixed Elbow 1/8" NPTF (PI480821S or PP480821W). Select a flow restrictor that is rated at approximately three times the RO s production rate FR Insert for 70 GPD to Drain, Blue $ 2.13 FR Insert for 100 GPD to Drain, Red $ 1.58 FR Insert for 150 GPD to Drain, Black $ 1.58 FR Insert for 200 GPD to Drain, Brown $ 1.58 FR JG JG Fixed Elbow 1/4" x 1/8" NPTF, W/150GPD Flow Restrictor $ 3.68 All sizes of Flow Restrictors listed above are available with JG Fixed Elbow FLOW RESTRICTORS Insert Flow Restrictors to fit JACO Fixed Elbow 1/8" NPTF ( N-O). Select a flow restrictor that is rated at approximately three times the RO s production rate. FR Insert for 70 GPD to Drain, Blue $ 2.13 FR Insert for 100 GPD to Drain, Red $ 1.58 FR Insert for 150 GPD to Drain, Black $ 1.58 FR Insert for 200 GPD to Drain, Brown $ 1.58 FR JG Jaco Fixed Elbow 1/4" x 1/8" NPTF, W/150GPD Flow Restrictor Insert, Call for other GPD $ 3.68 PRESSURE GAUGES Pressure Gauge, 100 PSI, 2 1/2" Dial, 1/4" MPT, Glycerin Filled, $ Low Pressure Gauge Pressure Gauge, 160 PSI, 2 1/2" Dial, 1/4" MPT, Glycerin Filled $ Pressure Gauge, 160 PSI, 2 Dial, 1/4" MPT $ 7.50 PRESSURE REGULATORS Regulates High Pressure and Spikes to 50, 60 or 85 PSI. Call for 3/8" QC. FMP50PSI Apex Filtamate Pressure Limiting Valve, 50PSI, 1/4" QC $ FMP60PSI Apex Filtamate Pressure Limiting Valve, 60PSI, 1/4" QC $ FMP85PSI Apex Filtamate Pressure Limiting Valve, 85PSI, 1/4" QC $ FMP60PSI-38 Apex Filtamate Pressure Limiting Valve, 60PSI, 3/8" QC $ FMP85PSI-38 Apex Filtamate Pressure Limiting Valve, 85PSI, 3/8" QC $ P-60-4 Water Pressure Regulator, Plastic with four -1/4" NPT Female Ports, Reduced Pressure Range 0 125psi, Max 300psi working pressure, Max temp range , Pre Set at 60 psi, Adjustable, 2 - Male Connectors (PI010822S) & 2 - Plugs included $ PUMPS-BOOSTER- Require Transformer and Pressure Switch The booster pump is durable, quiet and low voltage with adjustable pressure from 40 psi to 120 psi. It increases low feed pressure to reverse osmosis systems increasing production and improving water quality. CDP volts, 1/4" JG, Adjustable Outlet Pressure, Aquatec $ CDP volts, 3/8" JG, Adjustable Outlet Pressure, Aquatec $ TAS EP1 115V Transformer, 0.8 AMP, For 6800, Aquatec $ TACS V Transformer, 2 AMP, For 8800, Aquatec $ PSW-240 Tank 40 PSI Switch, 1/4" JG, For 6800 & 8800, Aquatec $ PSW-280 Tank 80 PSI Switch, 1/4" JG, For 6800 & 8800, Aquatec $ PSW-340 Tank 40 PSI Switch, 3/8" JG, For 6800 & 8800, Aquatec $ PSW-360 Tank 60 PSI Switch, 3/8" JG, For 6800 & 8800, Aquatec $ MORE PUMPS NEXT PAGE Fax: (RUSH) PURE WATER COMPONENTS Call for products not listed

23 INSTALLATION SUPPLIES MISCELLANEOUS PUMPS PERMEATE The non-electric permeate pump uses the hydraulic energy of the drain water to force product water into the storage tank, reducing membrane back pressure and maximizing available feed pressure. These quiet pumps improve efficiency of the RO water production and reduce wastewater. NSF 58 ERP-1000 Non electric, 1/4" JG $ PPC-1000 Permeate Pump Clip and Screws $ 4.02 PUMPS TRANSFER / DELIVERY The transfer/delivery pump is used to either draw water from a holding tank and pressurize it or to boost pressure from a low pressure source. The pump can be operated either in demand mode (pressure switch control contained in head of pump) or in delivery mode (controlled by external power switching device) E13-J574 DDP-5800 Series, Flow Range to 0.8 GPM, 115V, 3/8"JG, 60 PSI, Aquatec F12-J604 DDP 5800 Series, Flow Range to 1.7 GPM 115V, 3/8" JG, 70 PSI, Aquatec $ $ TESTING METERS - Temperature TM-1 Industrial Grade Digital Thermometer, 2 1/2" Stainless Steel Probe, 20" Cable, -50 to 200 C. For use is all $ TESTING METERS - TDS - In Line, Monitors TDS Levels of Feed and Product Water DM-1 In-Line Dual TDS Monitor - 1/4" Tee $ DM-1A In-Line Dual TDS Monitor - 3/8" Tee $ " Cable, Approximately 1000 Hours of Usage DM-2 Commercial In-Line Dual TDS Monitor - 1/4" Tee $ " Water Resistant Cable, Water Resistant Housing,Large Easy to Read LCD Display, Sliding Mounting TESTING METERS - Handheld (Batteries Included) TDS is the total amount of mobile charged ions including minerals, salts or metals dissolved in a given volume of water. EC (Electrical conductivity) is the measure of total concentration of dissolved salts in water. Distilled salts have a high EC. Conversion of Centigrade to Fahrenheit F = (9/5)C AP-1 COM-100 PH-200 TDS-EZ TDS-3 TDS-4 GRAINS OF HARDNESS = PPM (from TDS reading) 17.1 AP-1 AquaPro Water Quality Tester, Measures TDS & Temp (Centigrade & Fahrenheit), ppm TDS range, 0-80 C, $ COM-100 EC/TDS/Temperature Combo Meter, Waterproof, 0-80 C $ TDS 3 TDS & Temperature. Meter w/ Case, ppm, 0-80 C $ TDS 4 TDS Meter Slim Pocket Style, ppm, 0-80 C $ TDS-EZ Economy TDS Meter, ppm, 0-80 C $ PH-200 ph Meter & Thermometer, Waterproof, ph $ PH-BUF Variety pack of ph buffer solutions for calibration of PH Meter Includes 12 packets of different ph powder and 100 ml. mix bottle, Powder must be mixed with de-ionized water (not included). $ Call for products not listed PURE WATER COMPONENTS Call: (PURE) 21.

24 INSTALLATION SUPPLIES MISCELLANEOUS Part Number Description List ea LEAK DETECTORS & CONTROLLERS THE LEAK CONTROLLER is for water coolers, RO Systems, etc. Water source is shut off when moisture is detected by sensor. Alarm sounds until the valve is manually reset. Additional sensors may be added in series. Each unit comes with one sensor w/5' cord, bracket and batteries. Battery operated. Case quantity is 30. LCS25 Leak Controller Leak Detector, Water Alarm & Shut Off $ LCS38 Leak Controller Leak Detector, Water Alarm & Shut Off $ System, Battery, 3/8" QC, Sensor THE AQUAGATE is for water conditioners, water heaters or systems with large water flow. Sensors may be added in series or up to four (4) connections on the circuit board. Water source is shut off when moisture is detected. Alarm sounds until the valve is manually reset. Each unit comes with one sensor w/15' cord and batteries. Battery operated. AG100 AQUAGATE Leak Detector, Water Alarm & Shut-Off System, 1" Full Port Ball Valve, Sensor w/15' Cord, Battery Operated $ AQUAGATE and LEAK CONTROLLER -EXTENDER SENSOR PADS are Available for attachment to Circuit Board or Extenders for Daisy-Chain. Call for lengths and configurations LD-14 Leak Detector with Audible Alarm, 1/4" QC, Battery $ LD-38 Leak Detector with Audible Alarm, 3/8" QC, Battery $ LEAK PROTECTORS & REPLACEMENT TABLETS by WATTS Detects leaks and shuts off flow to a drinking water system. When a leak occurs, the absorbent applicator tablet expands to close valve and shut off incoming water supply. Two tablets included with each Leak Protector. Non-electric. LPSOV Leak Protector 1/4" Shut Off Valve W/2 Applicator tablets $ LPSOV 3/8 Leak Protector 3/8" Shut Off Valve W/2 Applicator tablets $ Maximum Operating Pressure - 100psi LPSOV-PAD Replacement Applicator Tablets (2 per pack) $ 5.30 AUTOMATIC SHUT-OFFS VALVES Watt s dual diaphragm provides automatic shut-off to the supply line when storage tank reaches 65% of inlet pressure. S3000W Square, 4-1/4" Jaco. White $ S3000HCW Square, 4-1/4 John Guest Quick Connect, White or Black $ PWS592Q Automatic Shut Off, Round, 4-1/4" JG, White, Stainless Steel Rim $ CHECK VALVES 7C-LF Dual Check Valve, Series 7C, 3/8" FPT x 3/8" FPT, ASSE 124 rated $ C220-JGW JG Fixed Elbow 1/4" x 1/8" NPTF (PI480821S) w/check Valve Insert $ 7.36 J /2" Check Valve, PP, Dual EPDM O-rings, PSI Rating $ John Guest 14SCV, 38SCV - Check Valves 1032 John Guest Check Valves - See Page 4 SHUT OFF VALVES - Parker/LIQUIfit Straight and Feed Supply Valves LFPP4VUC4 1/4" Tube x 1/4" Tube, High Temperature, Scale Resistant Ball $ 6.26 LFPP6VUC6 3/8" Tube x 3/8" Tube, High Temperature, Scale Resistant Ball $ 6.65 LFPP4VAS6 3/8" M Comp. x 3/8 F Comp" x 1/4"QC, Angle Stop Valve $ LFPP4VAS8 3/8" M Comp. x 1/2 " FPT x 1/4"QC + Adapter to convert to 3/8" F Comp x 1/2" F Comp, Angle Stop Valve $ WATERMINDER Shuts off the water at a pre-determined gallon count. Settings in 100 gallon increments. Measures up to 1800 gallons. WM2000HCW Waterminder, 1800 Gal, 1/4" JG Quick Connect, White $ GALLON COUNTER - for monitoring of the flow that has passed through your filtration (RO/DI) system. FLM-3 Flow Meter, 1/4" Quick Connect, Tracks in Liters or Gallons, Programmable Alarm, LCD Display $ Fax: (RUSH) PURE WATER COMPONENTS Call for prod-

25 INSTALLATION SUPPLIES PLUMBING ACCESSORIES CABLE TIES MS " 18#, Natural, Pkg of 100 $ 8.00 MS " 40#, Natural, Pkg of 100 $ MS " 50#, Natural, Pkg of 100 $ MS " 50#, Natural, Pkg of 100 $ SM " 50#, w/ #10 Hole, Natural, Pkg. of 100 $ HOSE CLAMPS - OETIKER ONE EAR STEPLESS /32" $ /32" $ /32" $ /2" $ /64" $ 0.67 HOSE CLAMPS - WORM GEAR CLAMPS 2W /2" to 3 1/4", 9/16" Width, For Drain Hose Clip $ /4" to 5/8", 5/16" Band Width, Stainless Steel $ /16" to 7/8", 5/16" Band Width, Stainless Steel $ 1.26 NAIL CLIPS 806NC0006 1/4" Nail Clips (100/box) $ NC0009 3/8" Nail Clips (100/box) $ NC0011 1/2" Nail Clips (100/box) $ TUBING / CABLE CLIPS AND CLIP GUN 59ES 1/4" Tubing Clips, Black, ID.241", 400/box $ WS 1/4" Tubing Clips, White ID.241, 400/box $ F30D 3/8" Tubing Clips, Black, ID.375", 400/box $ RB-2 1/4" Staple Clip Gun (Uses 59 Series Clips) $ RB-4 3/8" Staple Clip Gun (Uses F30D Clips) $ SILICONE GREASE AND LUBRICANT 111CMPD6G DOW 111 Silicone Grease, 6 gm packet, NSF Certified $ CMPD150G DOW 111 Silicone Grease, 150 gm Tube, NSF Certified $ TEFLON TAPE /2" x 260" Teflon Tape $ 1.50 TOOLS /8" to 1 1/8", Copper Tube Cutter $ CCK TUBE CUTTER CCK Plastic Tube Cutter $ 7.63 BLADES CCK Replacement Blades CCK $ 2.70 JG TSNIP John Guest Tube Cutter $ BLADES John Guest Replacement Blade $ 4.38 TSPITOOL John Guest Release Tool $ 2.84 JG-TS Pipe Cutter, Suitable for Plastic, Rubber, Nylon Pipe $ JGH-DC Heavy Duty Pipe Cutter $ BLADES JGHDC Blade Replacement - Heavy Duty Pipe Cutter $ Call for products not listed PURE WATER COMPONENTS 23.

26 FAUCETS FAUCETS AND ACCESSORIES - LEAD FREE FNP FAUCETS FOR RO AND UNDER COUNTER SYSTEMS, NO LEAD FNP3033CP-US05 Long Reach, CHROME, Non AG, Round Base, NSF, $ WATTS Top Mount WTMFAG-C Top Mount, Air Gap/Non AG, CHROME, 3/8 Tube $ WTMFAG-BN Top Mount, Air Gap/Non AG, BRUSHED NICKEL, 3/8 Tube $ WTMFAG-ORB Top Mount, Air Gap/Non AG, OIL RUBBED BRONZE, 3/8 $ WTMFAG-W Top Mount, Air Gap/Non AG, WHITE, 3/8 $ WTMFAG-BN-M Top Mount, Air Gap/Non AG, CHROME 3/8", Monitor $ WTMFAG-C-M Top Mount, Air Gap/Non AG, BRUSHED NICKEL 3/8", Monitor $ FA-110- (Long Reach) Air Gap or Non Air Gap FA-111- (Standard or Goose-neck) Air Gap or Non Air Gap NON AIR GAP FAUCETS FOR RO AND UNDER COUNTER SYSTEMS - Ceramic Disk Valve, 1/4 " Comp - Call for colors not listed FA-110-C-LF Long Reach, Non AG, CHROME (C) $ FA-110-BN-LF Long Reach, Non AG, BRUSHED NICKEL(BN) $ FA-110-ORB-LF Long Reach, Non AG, OIL RUBBED BRONZE(ORB) $ FA-110-WH-LF Long Reach, non AG, WHITE (WH) $ FA-111-C-LF Standard, Non AG, CHROME( C) $ FA-111-BN-LF Standard, Non AG, BRUSHED NICKEL ( BN) $ FA-111-ORB-LF Standard, Non AG, OIL RUBBED BRONZE (ORB) $ FA-111-WH-LF Standard, Non AG, WHITE (WH) $ AIR GAP FAUCETS FOR RO AND UNDER COUNTER SYSTEMS - Ceramic Disk Valve, 1/4 " Comp - Call for colors not listed FA110-C-AG-LF Long Reach, Air Gap, CHROME (C) $ FA110-BN-AG-LF Long Reach, Air Gap, BRUSHED NICKEL (BN) $ FA110-ORB-AG LF Long Reach, Air Gap, OIL RUBBED BRONZE (ORB) $ FA111-C-AG-LF Standard, Air Gap, CHROME (C) $ FA111-BN-AG-LF Standard, Air Gap, BRUSHED NICKEL (BN) $ FA111-ORB-AG-LF Standard, Air Gap, OIL RUBBED BRONZE (ORB) $ BN C ORB W FAUCETS TOMLINSON FAUCETS TOMLINSON RO FAUCETS Lever style handle, High reach neck of 12" & swivels 360, Air Gap hardware included with each faucet for Air Gap option, Base diameter of 2.25", Pre-Installed tubing, LEAD FREE, cold water only, 3 Styles available Hot and Cold Tomlinson Faucets are Available Designer Contemporary Polished Satin White Biscuit Polished Antique Black Bright Brushed Chrome Nickel Brass Bronze Nickel Stainless TOMLINSON DESIGNER RO FAUCETS F Polished Chrome $ F White $ F Black $ F Satin Nickel (Similar to Brushed Nickel) $ F Antique Bronze $ F Polished Brass $ F Brushed Stainless $ F Bright Nickel $ TOMLINSON CONTEMPORARY RO FAUCETS Venetian Bronze F Chrome $ F Satin Nickel (Similar to Brushed Nickel) $ F Antique Bronze $ F White $ F Black $ F Brushed Stainless $ F Polished Brass $ F Venetian Bronze $ Call: (PURE) PURE WATER COMPONENTS Call for products not listed

27 WATER FILTRATION RESIDENTIAL REVERSE OSMOSIS SYSTEMS WATTS REVERSE OSMOSIS SYSTEM - Sediment (FPMB5-978), Pre-Carbon Block Filter, (CBC 10-5 (5 Stage uses 2 Carbon Blocks), 50 GPD Membrane (W ), In-Line Post Carbon (AICRO), 4 Gal Storage Tank, Non Air Gap Faucet (Chrome), 3/8 Tubing from tank to faucet, Saddle Valve, Drain Connector, Assembled in USA. GTS550S-NAGF-MT (FMRO5MT-USA) GTS450S-NAGF-PT (FMRO4G-USA) GTS550S-NAGF-PT (FMRO5G-USA) PART # MODEL Stage (GPD) Faucet Tank -4 Gal Fittings LIST GTS450S-NAGF-MT (FMRO4MT-USA) GTS450S-NAGF-PT (FMRO4G-USA) GTS550S-NAGF-MT (FMRO5MT-USA) GTS550S-NAGF-PT (FMRO5G-USA) Long Reach Non AG, Lead Free Long Reach-Non AG Lead Free Long Reach-Non AG Lead Free Long Reach-Non AG Lead Free Metal Tank Quick Connect $ RO-PRO Quick Connect $ Metal Tank RO-PRO QC/Jaco Drain Connector QC/Jaco Drain Connector $ $ REVERSE OSMOSIS SYSTEM W/KWIK-CHANGE CARTRIDGES - Sediment Filter (WQCSC), Carbon Block Filter (WQCCC), GAC Filters (WQCGAC), Membrane (WQCM), Metal or Plastic Tank, NO FAUCET, Install Kit Hinge bracket for easy cartridge removal and replacement Internal valve shuts-off flow during cartridge and membrane replacement Proprietary filter cartridges and membranes are installed and removed by a 1/4 turn Cartridges have a double O-ring to prevent leakage Systems have integrated check valves between the cartridges and membranes to prevent backflow. PART # MODEL Stage (GPD) Size Elements Tank -4 Gal Fittings LIST WQC4RO11-50MTNF Metal Tank QC/Jaco Dr. Conn $ WQC4RO11-50PTNF RO-PRO QC/Jaco Dr. Conn $ GPD Systems Available W/13 Cartridges Call ****See Page 34 for Replacement Cartridges NEW for 2017 REVERSE OSMOSIS SYSTEM W/INCAPSULATED FILTER CARTRIDGES Sediment Filter, 10 Micron Carbon Block Filter, GAC Filter Standard 75 GPD Membrane, 4-Gal Metal Tank, Chrome Faucet, Install Kit PART # MODEL Stage (GPD) Tank -4 Gal Fittings LIST FIL-W Metal Tank Quick-Connects $ REPLACEMENT RO KIT Sediment, Carbon Block, GAC, 75 GPD Membrane PART # MODEL Stage (GPD) Fittings LIST FIL-W Quick-Connects $ REPLACEMENT FILTER KIT Sediment, Carbon Block, GAC PART # MODEL Stage (GPD) Fittings LIST FIL-W N/A Quick-Connects $ Non-RO DRINKING WATER UNITS WATTS KWIK-CHANGE UNITS - Non-Hinged Bracket and Specified Cartridges Only WQCFU-D-11 10" Dual System with bracket, Sediment & Carbon $ WQCFU-T-11 10" Triple System with bracket, Carbon, Sediment, $ UF Hollow Fiber Membrane See Page 34 for Replacement Cartridges and Filter specifications Call for products not listed PURE WATER COMPONENTS Call:

28 WATER FILTRATION DRINKING WATER UNITS-COUNTER TOP/UNDER COUNTER UNDER COUNTER DRINKING WATER UNITS - Fully Assembled, Non RO, Long Reach Chrome Non Air Gap Faucet, Cartridges Not Included ADWU-S Single Stage, Cartridge Not Included, $ ADWU-D Dual Stage, Cartridges Not Included $ ADWU-T Triple Stage, Cartridges Not Included $ COUNTER TOP FILTERS - Attaches to Faucet with Diverter, Cartridge Not Included ACT-C Single Housing, Chrome Long Reach Faucet, Assembled $ WATER FILTRATION REVERSE OSMOSIS SYSTEM ACCESSORIES BLADDER TANKS - NSF Certified RO TK-PRO-2-SS FRO-132-BL FRO-132-W ROPRO4W 2 Gal Metal RO Tank, Stainless Steel, White, 1/4" MPT Outlet, White, No Stand 4 Gal Metal Storage, SS Nipple, 1/4" MPT Outlet, Blue, 11" (Diam.) x 14" (Height), w/stand, NSF 58 4 Gal Metal Storage, SS Nipple, 1/4" MPT Outlet, White, 11" (Diam.) x 14" (Height), w/stand, NSF 58 4 Gal Plastic Storage, 100 PSI, 1/4" MPT Outlet, White, 100PSI, 9" (Diam.) x 20" (Height), NSF 58 $ $ $ $ FRO-1070-BL FRO-1070-WH TK-PRO-14W 14 Gal Metal Storage, NSH, 1/4" MPT Outlet, Blue, 15" (Diam.) x 23" (Height) w/stand, NSF Gal Metal Storage, NSH, 1/4" MPT Outlet, White, 15" (Diam.) x 23" (Height). w/stand, NSF Gal Metal Storage, NSH, 3/4" MPT Outlet, White, 15" (Diam.) x 23" (Height). w/stand, NSF 58, $ $ $ CALL FOR LARGER RO TANK SIZES - RANGING FROM 20 TO 119 GALLON RO HOUSINGS EH-2501KW Membrane Housing, PP, 1/8" FNPT,End, Side, Side $ EH-2501KHCW Membrane Housing, PP, 1/4" QC,,End, Side, Side $ OR2 O Ring for EH Membrane Housings $ 2.01 RO MEMBRANES PTLC - 50 Pentair Residential Membrane, 50 GPD $ PTLC Pentair Residential Membrane, 100 GPD $ W Watts Residential Membrane, 24 GPD $ W Watts Residential Membrane, 36 GPD $ W Watts Residential Membrane, 50 GPD $ W Watts Residential Membrane, 75 GPD $ W Watts Residential Membrane, 100 GPD $ ( ) Hydrotech, 25 gpd, TFC (Yellow/Black Band) $ Hydrotech, 50 gpd, TFC (Yellow/White Band) $ WQCM GPD Membrane for Kwik-Change $ WQCM GPD Membrane for Kwik-Change $ WQCM GPD Membrane for Kwik-Change $ Q /2" x 12", 80 GPD TFC RO Membrane, Omnipure $ PL TFC R/O Membrane for Purlogix - Water Coolers $ Call: (PURE) PURE WATER COMPONENTS Call for products not listed

29 WATER FILTRATION UV SYSTEMS - Call for Systems not Listed REVERSE OSMOSIS SYSTEM ACCESSORIES PUV-6W-110 Complete Plastic UV System w/replaceable Lamp, 1/4" JG, 1500 GPD, Max 120 psi, , 110V, SS $ (Replacement Ballast and Lamp have a new Part#) PUV-BAL110 Replacement Ballast, 110V, 6 Watts (PUV-BAL110) $ PUV-RL-6W Replacement Lamp, 110V, 6 Watts (PUV-RL-6W) $ See page 37 for Light Commercial Watts & Viqua UV Systems WATER FILTRATION FILTER HOUSINGS ACCESSORIES B1PW FM-10 FM-25 Bend Down Z Bend Up U Bend Down Z WBKT-CD WBKT-FF BRACKETS - FLOWMATIC & MISCELLANEOUS B1PW Single Plastic, White, Series 4200, 7000 (Residential) $ 2.50 FM10 Single Steel Zinc Plated w/screws, Series 500, 4200, 7000 $ 1.87 FM20 Single Steel, White, Series 4500, 8000 (Commercial) $ 3.23 FM-25A Single Aluminum, Series 5000, (Full-Flow) $ FM-25W Single Steel, Series 5000, (Full-Flow) $ FM-30 Double Steel, Series 500, 4000, 4200, 7000, Bend Down Z $ 9.37 FM-30AW Double Aluminum, Series 500, 4000, 4200, 7000, Bend Down $ FM-100SS Double Stainless Steel, Series 4500, 8000 $ FM-35W Double Steel, Series 5000 & 10000, Bend Down Z $ FM-40 Double Steel, Series 500, 4000, 4200, 7000, Bend Up U $ 9.51 FM-45 Triple Steel, Series 5000 & 10000, Bend Down Z $ FM-50 Triple Steel, Series 500, 4000, 4200, 7000, Bend Down Z $ FM-50AW Triple Aluminum, Series 500, 4000, 4200, 7000, Bend Down $ FM-60 Triple Steel, Series 500, 4000, 4200, 7000, Bend Up U $ BRACKETS - WATTS WBKT-RCS Bracket -Residential & Commercial Housings, Steel, White, $ 5.81 WBKT-RD Bracket - Double Residential Housing, Steel, White, Watts $ 8.71 WBKT-RT Bracket - Triple Residential Housing, Steel, White, Watts $ WBKT-CD Bracket - Double Commercial Housing, Steel, White, Watts $ WBKT-CT Bracket - Triple Commercial Housing, Steel, White, Watts $ WBKT-FF-1 Bracket for Watts Full-Flow Housings, Single, Steel, White $ WBKT-FF-2 Bracket for Watts Full-Flow Housings, Double, Steel, White $ WBKT-FF-3 Bracket for Watts Full-Flow Housings, Triple, Steel, White $ GAFFSCREW Mounting Screws/Washers for Watts Full-Flow Housing (4/pkg) $ 6.73 See page 16 for nipples BRACKET SCREWS MS0812 # 8 Mounting Screw, 1/2" for In-Line Filter Clips $ 0.17 MS1010 #10 Mounting Screw, 1", Series 4000, 4200 $ 0.30 MS1012 #10 Mounting Screw, 1/2", Series SS-1000 $ 0.17 MS1034 #10 Mounting Screw, 3/4", Series 4000, 4200 $ 0.28 MS1410 #14 Mounting Screw, 1", Series 8000, 4500 $ 0.64 MS5161 5/16 Mounting Screw, 1", Series 5000, $ 1.02 GAFFSCREW Mounting Screws/Washers for Watts Full-Flow Housing (4/pkg) $ 6.73 CLIPS FOR IN-LINE FILTERS PPC-204 Single Clip (Small), Fits 1.91" Cylinder $ 1.00 PPC-212 Single Clip (Med), Fits 2.375" Cylinder, Easy Clip $ 1.00 PPC-205 Double Clip (S/M), 2" & 2.5" OD $ 1.00 PPC-208 Double Clip (S/S), 2" OD $ 1.00 PPC-222 Double Clip (M/M), 2 1/2" OD $ 1.10 MS0812 #8 Mounting Screws, 1/2" for Mounting Clip $ 0.17 O RINGS OR2 O Ring, for EH Membrane Housing $ 2.01 OR4 O Ring, for FH Housing Series 4000,4200,7000 $ 1.84 OR5 O Ring for FH Housing Series 5000, $ 3.01 OR8 O Ring for FH Housing Series 4500, 8000 $ 4.08 WOR-R O Ring for Watts Residential Housings $ 0.68 WOR-C O Ring for Watts Commercial Housings $ 1.06 WOR-FF O Ring for Watts Full-Flow Housings $ 2.56 Call for Viton high-temp O-Rings Call for products not listed PURE WATER COMPONENTS Call: (PURE) 27.

30 WATER FILTRATION FILTER HOUSINGS ACCESSORIES HOUSING WRENCH PFW-190 Housing Wrench, Half Circle, 4200, 7000 Series, PAYNE $ 2.01 WR100 Housing Wrench, Std. & Slim Line, 4200, 7000 (FH) $ 2.27 WR200 Housing Wrench, 4500, 8000, Half-Circle (FH) $ 2.23 WR500 Housing Wrench, 5000, (FH) $ 5.29 WW-R Housing Wrench for Watts Residential Housing, White $ 1.46 WW-C Housing Wrench for Watts Commercial Housing, White $ 2.38 WW-FF Housing Wrench for Watts Full-Flow Housings, White $ 3.48 WATER FILTRATION Flowmatic Plastic Housings (FH) with buttress (tapered) thread. Temperature rated at 125 F. Food grade polypropylene FLOWMATIC and WATTS RESIDENTIAL HOUSINGS, 10", 20" Polypropylene, EPDM O-Ring, Max 125 psi, Buttress Threads FILTER HOUSINGS Part Number Description List ea. 1+ Case #/Case FH-4200WW14 10" Residential, 1/4" FNPT, White,/White, NSF Certified $ (12) FH-4200CW14 10" Residential, 1/4" FNPT, Clear Sump/White Cap $ (12) FH-4200BL14PR 10" Residential, 1/4" FNPT, PR, Blue/Black $ (12) FH-4200WW38 10" Residential, 3/8" FNPT, White/White, NSF Certified $ (12) FH-4200CW38 10" Residential, 3/8" FNPT, Clear Sump/White Cap $ (12) FH-4200CW12 10" Residential, 1/2" FNPT, Clear Sump/White Cap $ (12) FH-4200WW12 10" Residential, 1/2" FNPT, White//White $ (12) FH-4200WW12PR 10" Residential, 1/2" FNPT, PR, White/White $ (12) FH-4200CW34PR 10" Residential, 3/4" FNPT, PR, Clear Sump/White Cap $ (12) FH-4200BL34PR 10" Residential, 3/4" FNPT, PR, Blue/Black $ (12) FH-7000WW38 20" Residential, 3/8" FNPT, White/White $ (6) FH-7000WW38PR 20" Residential, 3/8" FNPT, PR, White/White $ (6) FH-7000BL38 20" Residential, 3/8" FNPT, Blue/Black $ (6) FH-7000BL12 20" Residential, 1/2" FNPT, Blue/Black $ (6) FH-7000BL12PR 20" Residential, 1/2" FNPT, PR, Blue/Black $ (6) COMMERCIAL HOUSINGS, 10", 20" - Polypropylene, EPDM O-Ring, Max 125 psi, Buttress Threads HD-4500BL34PR 10" Commercial, 3/4" FNPT, PR, Blue/Black $ (12) HD-4500CB34PR 10" Commercial, 3/4" FNPT, PR, Clear/Black $ (12) HD-4500HT34 10" Commercial, 3/4" FNPT, PR, RED (High Temp) $ (12) FH-8000BL34PR 20" Commercial, 3/4" FNPT, PR, Blue/Black $ (6) FH-8000BB34PR 20" Commercial, 3/4" FNPT, PR, Black/Black $ (6) FH-8000CB34PR 20" Commercial, 3/4" FNPT, PR, Clear/Black $ (6) FH-8000WW34PR 20" Commercial, 3/4" FNPT, PR, White/White $ (6) FULL-FLOW (BB), 10", 20" - Polypropylene, EPDM O-Ring, Max 90 psi, Buttress Threads FH-5000BL34PR 10" Full Flow BB, 3/4" FNPT, PR, Blue/Black $ (4) FH-5000BL1PR 10" Full Flow BB, 1" FNPT, PR, Blue/Black $ (4) FH-5000CB1PR 10" Full Flow BB, 1" FNPT, PR, Clear/Black $ (4) FH-10000BL34PR 20" Full Flow BL, 3/4" FNPT, PR, Blue/Black $ (4) FH-10000BB1PR 20" Full Flow BB, 1" FNPT, PR, Black/Black $ (4) FH-10000BL1PR 20" Full Flow BB, 1" FNPT, PR, Blue/Black $ (4) FH-10000BL15PR 20" Full Flow BB, 1.5" FNPT, PR, Black/Black $ (4) RESIDENTIAL HOUSINGS, 10", 20"- Polypropylene, EPDM O-Ring, Max 125 psi, Straight Threads, Flat Cap Watts Plastic Housings (W) are made of polypropylene with EPDM O-Ring, rated for 125 F, 125psi with straight threads (not interchangeable with FlowMatic Housing cap or sump). Flat Cap Part Number Description List ea. 1+ Case #/Case W10RPH14WW 10" Residential, 1/4" FNPT, White/White, Flat Cap $ (15) W10RPH12CW 10" Residential, 1/2" FNPT. Clear Sump/White Cap, $ (15) W10RPH12WW 10" Residential, 1/2" FNPT, White/White, Flat Cap $ (15) 28. See pages 15 & 16 for nipples PURE WATER COMPONENTS Cont. Call for products not listed

31 WATER FILTRATION WATTS FILTER HOUSINGS Part Number Description List ea. 1+ Case #/Case COMMERCIAL HOUSINGS, 10", 20" - Polypropylene, EPDM O-Ring, Max 125 PSI, Straight Threads W10CPH34CBPR 10" Commercial, 3/4" FNPT, PR, Clear/Black $ (12) W10CPH34BLPR 10" Commercial, 3/4" FNPT, PR, Blue/Black $ (12) W20CPH34BLPR 20" Commercial, 3/4" FNPT, PR, Blue/Black $ (8) FULL-FLOW (BIG BLUE) HOUSINGS, 10", 20" - Rated Max 90 psi, Straight Threads W10FFPH34BLPR 10" Full Flow BB, 3/4" FNPT, PR, Blue/Black $ (6) W10FFPH1BLPR 10" Full Flow BB, 1" FNPT, PR, Blue/Black $ (6) W10FFPH1CBPR 10" Full Flow BB, 1" FNPT, PR, Clear/Black $ (6) W20FFPH34BLPR 20" Full Flow BB, 3/4" FNPT, PR, Blue/Black $ (6) W20FFPH1BLPR 20" Full-Flow BB, 1" FNPT, PR, Blue/Black $ (6) W20FFPH1CBPR 20" Full-Flow BB, 1" FNPT, PR, Clear/Black $ (6) W20FFPH15BLPR 20" Full-Flow BB, 1.5" FNPT, PR, Blue/Black $ (6) WATER FILTRATION REFILLABLE CARTIRIDGES CALL FOR MEDIA Part Number Description List ea. 1+ Case #/Case RC-C /2"x 9 3/4" Refillable Cartridge, Empty, 50M Pad $ 4.68 (12) RC-C /2"x 20" Refillable Cartridge, Empty, 50M Pad $ (12) RC-W-BB /2"x 20" Refillable Cartridge, Empty, 50M Pad $ (4) WATER FILTRATION Part Number Description List ea. 1+ Case #/Case CHLORINE, TASTE, ODOR & SEDIMENT REDUCTION CARBON BLOCK CARTRIDGES CaWare - COCONUT SHELL CARBON CARTRIDGE Chlorine, Taste,and Odor, OD x Length, 165, NSF Certified CBC /2" x 10", 5u, 4000 Gal $ 6.91 (20) CBC /2" x 10", 10u $ 6.91 (12) CBC /2" x 20", 5 u $ (12) BCBC /2" x 9 3/4", 5u, Full Flow $ (6) BCBC /2" x 20", 5u, Full Flow $ (6) CHLORINE, TASTE, ODOR & SEDIMENT REDUCTION MAX-ETW CARBON BLOCK - Chlorine, Taste and Odor - Economical (OD x Length), NSF Certified, All C-MAX filters rated for temperatures to 165 F C-MAX MAXETW /2" x 9 3/4", Thick Wall, 5 u, 3000 Gal $ (12) MAXETW /2" x 20", Thick Wall, 5 u, 6000 Gal $ (6) MAXETW-FF /8" x 9 3/4", Thick Wall, 5 u, Gal, Full Flow $ (4) MAXETW-FF20 4 5/8" x 20", Thick Wall, 5 u, $ (4) HIGH DIRT HOLDING CAPACITY CARBON BLOCK Pentek EP Series- High Dirt Holding Capacity, 5u. NSF, (OD x Length) /8" x 9 3/4", EP-10, 6000 Gal $ (12) /8" x 20", EP-20, Gal $ (6) /2" x 9 3/4", EP-BB, 22,000 Gal, Full Flow $ (4) /2" x 20", 5 u, EP-20BB, Gal, Full Flow $ (4) REDUCTION OF VOCS, CYSTS, & TASTE AND ODOR CARBON BLOCK Pentek CBC Series - Reduction of chlorine taste and odor. Reduction of cysts and fine sediment particles down to 0.5u, NSF, (OD x Length) /8" x 9 3/4", CBC-10, 0.5 u, Gal $ (12) /8" x 20", CBC-20, 0.5U 45,000 Gal $ (6) /8" x 9 3/4", CBC-BB, 0.5 u, 50,000 Gal, Full Flow $ (4) /8" x 20", CBC-20BB, 0.5u, 150,000 Gal, Full Flow $ (4) CHLORAMINE REDUCTION CARTRIDGE /8" x 9 3/4", Chlor-Plus 10, 50,000 Capacity $ (12) Call for products not listed PURE WATER COMPONENTS Call: (PURE) 29.

32 WATER FILTRATION CARBON BLOCK CARTRIDGES Part Number Description List ea. 1+ Case #/Case LEAD & CYST REDUCTION MAX-PB COCONUT SHELL CARBON BLOCK - for Lead & Cyst Reduction, 0.5u, NSF, rated for temperatures to 165, (OD x Length) C-MAX MAXPB /8" x 9 3/4", 0.5 u, Gal $ (12) MAXPB-FF20 4 5/8" X 20", 0.5 u, Gal, Full Flow $ (6) IRON REDUCTION FOR WHOLE HOUSE - Radial Flow, Removes dissolved iron, metallic taste & stains from plumbing fixtures. Reduction for ferrous iron (dissolved), up to 3ppm FPIR-BB /2" x 20", Ferrous Iron Reduction, 4-6 GPM. Capacity gals (3 ppm), gals (2ppm), gals (1 ppm) Flow-PRO $ (6) WATER FILTRATION GAC AND SPECIALTY CARTRIDGES WATER WASHED COCONUT SHELL GRANULAR ACTIVATED CARBON (GAC) CARTRIDGE Flow-PRO GAC10N 2 3/4" x 9 3/4", 2500 Gal - Flow-PRO $ 8.02 (24) GAC20NRW 2 3/4" x 20", 5000 Gal - Flow-PRO $ (24) GAC-BB10 4 1/2" x 9 3/4", Full Flow, 7500 Gal - Flow-PRO $ (8) GAC-BB20 4 1/2" x 20", Full Flow, 15,000 Gal - Flow-PRO $ (4) /2 x 20 Radial-Flow GAC, 70,000 Gal Pentek $ (6) GAC + KDF55 - Enhanced Chlorine Reduction, Municipal Water Effective chlorine removal agents that may be used in point-of-entry municipal water supplies. Patented medium consists of high purity copper-zinc granules to reduce/remove chlorine. KDF55 is ideal for whole house water treatment and in commercial buildings to reduce chlorine with concentrations up to 5ppm. AF /2" x 10", 8000 Gal, $ (12) AF /2" x 20", Gal. $ (9) AF BB 4 1/2" x 10", Gal. $ (8) AF BB 4 1/2" x 20", 95,000 Gal, Full Flow $ (4) GAC + KDF85 - Iron, HS Reduction, Well/Ground Water Effective ferrous iron and hydrogen sulfide (H2S) removal agents that may be used alone or to protect existing water filtration/ purification technologies in point-of-entry treatment of ground water supplies. Patented medium consists of copper-zinc granules that effectively reduce/remove iron and hydrogen sulfide. Stabilized W/Acid-Washed Coconut GAC. AF /2" x 10",.5 lb of KDF85, 8,000 Gal., Clear $ (12) AF /2" x 10", 1 lb of KDF85, 16,000 Gal., Clear $ (12) AF /2" x 20", 22,000 Gal., Clear $ (9) AF BB 4 1/2" x 9 3/4", 35,000 Gal., Clear $ (8) AF BB 4 1/2" x 20", 95,000 Gal, Full Flow $ (4) GAC Catalytic Carbon Cartridge for Chloramines & Hydrogen Sulfide Removal AF /2" x 9 3/4", 1,800 Gal Capacity $ (12) GAC +PHOSPHATE - Carbon treatment plus Scale Reduction, Phosphate W/Acid Washed Coconut Shell GAC. AF /2" x 10", 8 oz. Phosphate, 4,000 Gals. Capacity $ (12) AF /2" x 20", 1 lb. Phosphate. 8,000 Gals. Capacity $ (9) AF BB 4 1/2" x 9 3/4", 2 lb. Phosphate, 16,000 Gals. Capacity $ (8) AF BB 4 1/2" x 20", 2 lb. Phosphate, 16,000 Gals. Capacity $ (4) CALCOR - ph Neutralizing Cartridge, 50% Calcite, and 50% Corosex AF /2" x 10", ph Neutralizing $ (12) NITRATE REMOVAL - ANSI/NSF61 AF /2" x 10", Nitrate Removal, Aries $ (12) IF-SM-NIT /2" x 9 3/4", 5,000mg/l, Intelifil $ (12) MIXED BED DI RESIN FOR DEMINERALIZATION available in certain filter sizes. Grains of Hardness = PPM (from TDS reading) 17.1 Ideal cartridge for Post RO to lower TDS. Color change indicator Gal. Usage = Grains of resin in filter Grains of hardness in water ARIES WITHOUT COLOR CHANGING INDICATOR, BLUE CARTRIDGE, HIGH PURITY DEIONIZER AF /2" x 10", 450 Grains Capacity $ (12) AF /2" x 20", 900 Grains Capacity $ (9) AF BB 4 1/2" x 9 3/4", 1050 Grains Capacity, Full Flow $ (8) AF BB 4 1/2" x 20", 2,350 Grains Capacity, Full Flow $ (4) 30. Cont. More DI Filters Call for products not listed PURE WATER COMPONENTS Call: (PURE)

33 WATER FILTRATION GAC AND SPECIALTY CARTRIDGES Part Number Description List ea. 1+ Case #/Case MIXED BED DI RESIN FOR DEMINERALIZATION Ideal cartridge for Post RO to lower TDS. Color change indicator available in certain filter sizes. ARIES WITH NO COLOR CHANGING INDICATOR, CLEAR CARTRIDGE, LOW ODOR HIGH PURITY DEIONIZER AF /2" x 10", 450 Grains Capacity, Clear, Low Odor $ (12) ARIES WITH COLOR CHANGING INDICATOR, CLEAR CARTRIDGE, HIGH PURITY DEIONIZER AF /2" x 10", 450 Grains Capacity, $ (12) AF /2" x 20", 900 Grains Capacity $ (9) FLORIDE REDUCTION CARTRIDGE GAC and Fluoride Removal Media (Activated Alumina) IF-SM-AA /2" x 9 3/4", 4,500 mg/l, Intelifil $ (12) WATER FILTRATION HYDROTECH Part Number Description List ea. 1+ Case #/Case HYDROTECH and HYDROTECH-Compatible Carbon Block, 10u, CTO, Blue Cap $ (24) Lead Removal, 1u, Aquafier Lead Filter, Black Cap $ (24) Coconut Carbon Block, 5u, Aquafier Carbon Filter, White Cap $ (24) gpd, TFC Membrane (# ) - Yellow/Black Band gpd, TFC Membrane - Yellow/White Band * See page 26 for pricing String Wound Depth-Gradient Sediment Filter, Black Cap $ 6.85 (24) RS-22-CB5 Carbon Block, 10", 10 u, Hydrotech Compatible $ 9.80 (36) RS-22-SED5 Spun Bonded PP, Sediment, 5u, Hydrotech Compatible $ 4.80 (36) WATER FILTRATION PLEATED FILTER CARTRIDGES - SEDIMENT WATTS BRAND LOW-COST PLEATED CARTRIDGES - 100% Cellulose Free. Synthetic Media, Color Coded End Caps, Wrapped (OD x Length) Part Number Description List ea. 1+ Case #/Case WPC /4" x 9 3/4", 1u, Tan $ 6.72 (24) WPC /4" x 9 3/4", 5u, White $ 5.97 (24) WPC /4" x 9 3/4", 20u, Blue $ 4.85 (24) WPC /4" x 9 3/4", 50u, Yellow $ 4.90 (24) WPC /4" x 20", 1u, Tan $ (25) WPC /4" x 20", 5u, White $ (25) WPC /4" x 20", 20u, Blue $ (25) WPC /4" x 20", 50u, Yellow $ (25) WPC1-FF /2" x 9 3/4", Full-Flow, 1u $ (18) WPC5-FF /2" x 9 3/4", Full-Flow, 5 u $ (18) WPC20-FF /2" x 9 3/4", Full-Flow, 20 u $ (18) WPC50-FF /2" x 9 3/4", Full-Flow, 50 u $ (18) WPC1-FF20 4 1/2" x 20", Full-Flow, 1 u $ (18) WPC5-FF20 4 1/2" x 20", Full-Flow, 5 u $ (9) WPC20-FF20 4 1/2" x 20", Full-Flow, 20 u $ (9) WPC50-FF20 4 1/2" x 20", Full-Flow, 50 u $ (9) PURE WATER COMPONENTS Call for products not listed 31.

34 WATER FILTRATION PLEATED FILTER CARTRIDGES - SEDIMENT Part Number Description List ea. 1+ Case #/Case FLOW-MAX PLEATED FILTER CARTRIDGES - SEDIMENT- 100% Cellulose Free Synthetic Media, Pleated for greater surface area and longer life, 5u and up are washable, (OD x Length) Flow-Max FM /4" x 9 3/4", 0.35u $ (24) FM /4" x 9 3/4", 1u $ (24) FM /4" x 9 3/4", 5 u $ 8.14 (24) FM /4" x 9 3/4", 20 u $ 7.63 (24) FM /4" x 9 3/4", 50u $ 7.63 (24) FM /4 x 20, 0.35u $ (24) FM /4" x 20", 1u $ (24) FM /4" x 20", 5 u $ (24) FM /4" x 20", 20 u $ (24) FM-BB /2" x 9 3/4", Full-Flow, 1u $ (8) FM-BB /2" x 9 3/4", Full-Flow, 5 u $ (8) FM-BB /2" x 9 3/4", Full-Flow, 20 u $ (8) FM-BB /2" x 9 3/4", Full-Flow, 50 u $ (8) FM-BB /2" x 20", Full-Flow, 0.35u $ (4) FM-BB /2" x 20", Full-Flow, 1u $ (4) FM-BB /2" x 20", Full-Flow, 5 u $ (4) FM-BB /2" x 20", Full-Flow, 20 u $ (4) FM-BB /2" x 20", Full-Flow, 50 u $ (4) WATER FILTRATION MELT BLOWN CARTRIDGES - SEDIMENT FLOW-PRO MELT BLOWN - Polypropylene Cartridges, Sediment, Low cost, High Dirt Holding Capacity, Excellent Chemical Resistance, NSF (OD x Length) Flow-Pro FPMB /2" x 9 7/8", 1u $ 2.36 (48) FPMB /2" x 9 7/8", 5 u $ 2.00 (48) FPMB /2" x 9 7/8", 10 u $ 2.00 (48) FPMB /2" x 9 7/8", 20 u $ 2.00 (48) FPMB /2" x 9 7/8", 50 u $ 2.00 (48) FPMB /2" x 20", 1 u $ 4.55 (24) FPMB /2" x 20", 5 u $ 4.32 (24) FPMB /2" x 20", 20 u $ 4.32 (24) FPMB /2" x 20", 50 u $ 4.29 (24) FPMB-BB /2" x 9 3/4, 1 u, Full Flow $ (24) FPMB-BB /2" x 9 3/4, 5 u, Full Flow $ (24) FPMB-BB /2" x 20", 1 u, Full Flow $ (12) FPMB-BB /2" x 20", 5 u, Full Flow $ (12) FPMB-BB /2" x 20", 20 u, Full Flow $ (12) FPMB-BB /2" x 20", 50 u, Full Flow $ (12) WATER FILTRATION WOUND FILTER CARTRIDGES - SEDIMENT FLOW-PRO WOUND FILTER CARTRIDGES Polypropylene String, Excellent chemical resistance, Food Grade for Potable Water, High dirt holding capacity (OD x Length) SF /4" x 9 3/4", 1 u $ 3.62 (30) SF /4" x 9 3/4", 5 u $ 3.62 (30) SF /4" x 9 3/4", 20 u $ 3.32 (30) SF /4" x 9 3/4", 50 u $ SF /2" x 20", 1 u $ 6.48 (15) SF /2" x 20", 5 u $ 6.48 (15) SF /2" x 20", 20 u $ 6.11 (15) SF /2" x 20", 50 u $ 6.11 (15) SF /2 " x 9 3/4", 1 u, Full Flow $ (8) SF /2 " x 9 3/4", 5 u, Full Flow $ (8) SF /2 " x 9 3/4", 20 u, Full Flow $ (8) SF /2 " x 9 3/4", 50 u, Full Flow $ (8) SF /2" x 20", 1 u, Full Flow $ (4) SF /2" x 20", 5 u, Full Flow $ (4) SF /2" x 20", 20 u, Full Flow $ (4) SF /2" x 20", 50 u, Full Flow $ (4) 32. Call for products not listed PURE WATER COMPONENTS Call: (PURE)

35 WATER FILTRATION Part Number Description List ea. 1+ Case #Case TOC - Taste, Odor & Chlorine Reduction; TOC/Cyst - Taste, Odor, Chlorine & Cyst Reduction TOC/Cyst/Lead - Taste, Odor, Chlorine, Cyst & Lead Reduction; TOC/Cyst/Scale - Taste, Odor, Chlorine, Cyst & Scale Red. INLINE CARBON (GAC) IN LINE FILTERS AICRO/KDF050 2" x 10", 1/4" FNPT, 0.5 lb. KDF55, Chlorine Reduction $ (25) " x 10", Calcite, 1/4"FPT,Raises TDS/pH,#GS10CAL/RO-B, Pentek $ (25) " x 10", Calcite, 3/8"QC, Raises TDS/pH,#GS10CAL/RO-H, Pentek $ (25) /2" x 11", 1/4"FPT, Pentek, 20u, High Capacity DI Resin, TDS $ (25) Reduction, Pentek, #GS-210DI-B /2" x 14", 1/4"FPT, Pentek, 20u, High Capacity DI Resin, TDS $ (25) Reduction, Pentek, #GS-215DI-B " x 10", 3/8" QC, #GS-10RO-H, Coconut Shell GAC, Pentek $ (25) AICRO 2" x 10", Coconut Shell GAC, 1/4" FPT $ 8.08 (25) AICRO JGK 2" x 10", Coconut Shell GAC, 1/4" JG $ (25) INLINE SEDIMENT AIPRO 2" x 10", 1/4 FPT", PP Spun, 5u, Kemflo $ (25) " x 10", 3/8 FPT", 5u Sediment & Rust, GS-10SED/5-C, Pentek $ (25) K - SERIES INLINE OMNIPURE GRANULAR ACTIVATED CARBON (GAC) K2333JJ 2" x 6", Acid Washed, 1/4" QC, Post RO, TOC $ (25) K2333-LPSO 2" x 6", Acid Washed, 1/4" QC, Post RO, TOC $ (25) K2528JJ 2" x 10", 1/4" QC, Pre RO, TOC $ (25) K2533JJ 2" x 10", Acid Washed, 1/4" QC, Post RO, TOC $ (25) K2586JJ 2" x 10", Polyphosphate, 1/4" QC, Scale Inhibitor, TOC/SCALE $ (25) K5528JJ 2 1/2" x 10", 1/4" QC, Pre RO, TOC $ (25) K5528SS 2 1/2" x 10", 1/4" JG 90, Pre RO, TOC $ (25) K5533JJ 2 1/2" x 10", Acid Washed, 1/4" JG, Post RO, TOC $ (25) K5540SS 2 1/2" x 10", Coconut Shell Acid Washed, 1/4" JG 90,Post RO, $ (25) TOC K5686JJ 2 1/2" x 12", Polyphosphate, 1/4" QC, TOC/SCALE $ (25) K5628JJ 2 1/2" x 12", 1/4 QC, Pre RO, TOC $ (25) K5633JJ 2 1/2" x 12", Acid Washed, 1/4 QC, Post RO, TOC $ (25) SCL10 2" x 10", Phosphate, 1/4" FPT, TOC/SCALE $ (25) K - SERIES INLINE OMNIPURE CARBON BLOCK K2515JJ 2" x 10", 1u, 1/4" QC, Lead Specific Media, TOC/CYST/LEAD $ (25) K2520JJ 2" x 10", 1u. 1/4" QC,, TOC/CYST $ (25) K2521JJ 2" x 10", 10 u, 1/4" QC, TOC $ (25) K5515JJ 2 1/2" x 10", 1 u, Lead Specific Media,1/4" QC, TOC/CYST/LEAD $ (25) K5520JJ 2 1/2" x 10", 1 u, 1/4" QC, TOC/CYST $ (25) K5615JJ 2 1/2" x 12", 1 u, Lead Specific Media, 1/4" QC, TOC/CYST/ $ (25) K5620JJ 2 1/2" x 12", 1 u, 1/4" QC, TOC/CYST/SCALE $ (25) K5621JJ 2 1/2" x 12", 10 u, 1/4" QC, TOC $ (25) K - SERIES INLINE OMNIPURE SEDIMENT K2505JJ 2" x 10", PP Spun, 5 u, 1/4" QC $ (25) K5505JJ 2 1/2" x 10", PP Spun, 5 u, 1/4" QC $ (25) K5505SS 2 1/2" x 10", PP Spun, 5 u, 1/4" JG, 90 $ (25) K5605JJ 2 1/2" x 12", PP Spun, 5 u, 1/4" QC $ (25) WATER FILTRATION OMNIPURE - E SERIES - EVERPURE COMPATIBLE E - SERIES OMNIPURE E /2" x 10", Spun PP, 5 u, Sediment $ (20) E /2" x 10", Carbon Block, Lead Specific Media,1u,TOC/LEAD $ (20) E /2" x 10", Carbon Block, 1u, TOC/CYST $ (20) E /2" x 10", Carbon Block, 10 u, TOC $ (20) E /2" x 10", GAC, Pre RO, TOC $ (20) E /2" x 10", Acid Washed GAC, Post RO, TOC $ (20) E /2" x 10", GAC + Polyphosphate, TOC/SCALE $ (20) E5620-P 2 1/2" x 12", GAC + Polyphosphate, 1u, TOC/SCALE $ (20) E /2" x 12", GAC/KDF55, TOC $ (20) E /2" x 14", GAC, Pre RO, TOC $ (20) OMNIPURE E SERIES - PERMANENT HEAD AND BRACKET ELF - DK7 E Filter Head, 3/8" FPT $ (20) E/ELF/Q Series E Filter Head Bracket w/screws $ 4.00 (20) Fax: (RUSH) PURE WATER COMPONENTS Call for products not listed 33.

36 WATER FILTRATION OMNIPURE Q SERIES Part Number Description List ea. 1+ Case #/Case OMNIPURE Q SERIES Q /2" x 8", Keurig Filter, Taste, Odor, Scale Inhibitor $ (25) Q /2" x 12", Spun PP, 5u, $ (25) Q /2" x 12", Carbon Block, 1u, Cyst & Lead $ (25) Q /2" x 12", Carbon Block, 1 u, Cyst $ (25) Q /2" x 12", Carbon Block, 10 u $ (25) Q /2" x 12", GAC, Pre RO $ (25) Q /2" x 12", GAC Acid Washed, Post RO $ (25) Q /2" x 12", GAC, Post RO $ (25) Q /2" x 12", 80 GPD TFC RO Membrane $ (25) Q /2" x 12", GAC Phosphate, Scale Inhibitor $ (25) Q /2" x 14", GAC, Pre RO $ (20) OMNIPURE Q SERIES - NON-VALVED HEADS and BRACKET Q-1/4NVH 1/4" FPT, Non-Valved Q Series Head $ (25) Q-1/4NVHJJ 1/4" Quick Connect, Non-Valved Q Series Head $ (25) E/ELF/Q Series Single Bracket w/screws for Non-Valved Head $ 4.00 (20) WATER FILTRATION Quick-Change WATTS CARTRIDGES & Brackets See page 25 for Reverse Osmosis Systems, Cooler Cartridge Systems and Drinking Water Units that use Kwik-Change Cartridges UF Membrane (Purple) Type Micron Capacity in gallons Size of Cartridge 10" 11" 13" Sediment (RED) ,000 1,100 Carbon (YELLOW) 1 1,500 2,000 2,500 UF Hollow Fiber Membrane (PURPLE) ,500 2,000 2,500 Carbon GAC (BLUE) 1,500 2,000 2,500 TFC RO Membrane (GREEN) 35GPD 50GPD 100GPD Part Number Description List ea. 1+ Case #/Case Quick-Change 10" CARTRIDGES Carbon Block WQCCC10 Carbon Block, Taste. Odor, Chlorine - Yellow $ (30) WQCHFC10 UF Hollow Fiber Membrane - Purple $ (30) WQCGAC10 Granular Activated Carbon - Blue $ (30) WQCM GPD Membrane - Green $ (30) WQCSC10 Sediment, 5u - Red $ (30) GAC (Blue) Quick-Change 11" CARTRIDGES WQCCC11 Carbon Block, Taste. Odor, Chlorine - Yellow $ (25) WQCHFC11 UF Hollow Fiber Membrane - Purple $ (25) WQCGAC11 Granular Activated Carbon - Blue $ (25) WQCM GPD Membrane - Green $ (25) WQCSC11 Sediment, 5u - Red $ (25) Quick-Change 13" CARTRIDGES RO Membrane (Green) Sediment (Red) WQCCC13 Carbon Block, Taste. Odor, Chlorine - Yellow $ (25) WQCHFC13 UF Hollow Fiber Membrane - Purple $ (25) WQCGAC13 Granular Activated Carbon - Blue $ (25) WQCM GPD Membrane - Green $ (25) WQCSC13 Sediment, 5u - Red $ (25) Quick-Change Brackets - Brackets are unhinged with no internal valve to shut off flow during cartridge/membrane change. WQCFUB-S Bracket Only for filter unit (No Head Connectors), Single $ (10) WQCFUB-D Bracket Only for filter unit (No Head Connectors), Double $ (10) WQCFUB-T Bracket Only for filter unit (No Head Connectors), Triple $ (10) Double Bracket W/Ports Attached WQCH14-2 Valved Head Connector -2 ports, 1/4" QC $ 5.18 (10) WQCH14-3 Head Connector -3 ports. 1/4" QC (for RO membrane) $ 6.50 (10) WQCFUB- Screws for Quick-Change Brackets $ 0.30 (10) Quick-Change Units 34. Call for products not listed PURE WATER COMPONENTS

37 WATER FILTRATION Watts Quick-Change Under Counter Units WATTS QUICK-CHANGE UNITS - 11 Filters and Non-Hinged Bracket Only WQCFU-D 11" Dual System with bracket, Sediment & Carbon $ WQCFU-T 11" Triple System with bracket, Carbon, Sediment, UF Hollow Fiber Membrane $ WATER FILTRATION PURLOGIX CARTRIDGES & ACCESSORIES Part Number Description List ea. 1+ Case #/Case PL Sediment (Yellow Label) $ (30) PL Post Carbon (Blue Label) $ (30) PL U/F Filter (Black Label) $ (30) PL RO Membrane, 80 GPD (Red Label) $ (10) PL Pre Carbon (Green Label) $ (30) PL Carbon Block, 1u (Purple Label) $ (30) PHX0002A Clip, 4M (4 slots for cartridges) $ 1.95 (30) PCM0001A U.V. Replacement Bulb and Quartz Sleeve Assembly $ (30) PHC0026A U.V. Lamp Nut $ 0.72 (30) L-SOL Valve, SV-11SDW-4 (Old Part #PCC0001A) $ (30) PHX0002A Clip (holds 4 Purlogix filters) $ 1.95 (30) PFC0004A Hot Cock Valve, White, Purlogix $ (30) PFC0004B Cold Cock Valve, White, Purlogix $ (30) Cold Cock Valve, Black $ (30) Hot Cock Valve, Black $ (30) WATER FILTRATION MISCELLANEOUS Part Number Description List ea IN LINE SHOWER FILTER FMSHWRKDF55 SH-CP-1 Chlorine & Heavy Metal Reduction, 100% KDF-55, 4 3/4 " Length x 3 " Diameter Chrome Single Spray Shower Head & Replaceable Filter, KDF-55 Media $ $ SCALE KLEEN VE2431 Scale Kleen 24-7 oz. Pkgs./Case, Removal of scale deposits $ 9.58 Case Quantity 24 HAYNES LFP LUBRICANT 4 oz. Haynes Lubri Film Plus, Sanitary Lubricant, not for use on o-rings $ 8.25 Case Quantity 12 Fax: (RUSH) PURE WATER COMPONENTS Call for products not listed 35.

38 Part Number Description List ea BIG-BUBBA NON-METAL FILTER HOUSING - Economical alternative to high cost stainless steel Whole House Made of rugged glass reinforced PP 2 outlets to allow flexibility for installations NSF ANSI BBH-150 BIG-BUBBA FILTERS - 40 W/Double o-rings Big Bubba WHOLE HOUSE FILTER BBC-150-ACP Activated Carbon, Chlorine, Taste, Odor & Sediment Reduction, 5u $ BBC-150-D1 BBC-150-D5 BBC-150-D50 Plastic, 40" H x 12" OD, 150GPM, 125 PSI, 2" FNPT. Call for specifications Melt Blown PP, Depth, Sediment, Use if Gelatinous substances and Chemical resistance required, 1 u Melt Blown PP, Depth, Sediment, Use if Gelatinous substances and Chemical resistance required, 5 u Melt Blown PP, Depth, Sediment, Use if Gelatinous substances and Chemical resistance required, 50 u $ $ $ $ BBC-150-P5 Pleated, Sediment, 5 u $ BBC-150-P50 Pleated, Sediment, 50 u $ WHOLE HOUSE RO R4X40 Series Whole House RO - Inlet solenoid valve 20" prefilter Prefilter Pressure gauge Low-pressure protection W/microprocessor auto reset Stainless steel Pressure vessel (s) Product flow meter & Reject flow meter Feed water and product water TDS monitor For indoor installation only Applications: Whole House, Process Water, Boiler Feed Water, Electronics, Humidifiers, Car wash spot-free, Greenhouses. For Indoor installation only. Model # R4X40-1 R4X40-2 RX4x40-3 Maximum GPD Call for Pricing -Call for other RO Systems not listed. No. of Membranes Feed Water Required 10 gpm 12gpm 14gpm Dimensions 20x20x50 20x20x50 20x26x50 LC Series Light Commercial RO Systems LC200P-MINI - Compact Light-Commercial RO System, Rated 200GPD, 4.5 x 10 Sediment and (2)Carbon Filters, (2)100 GPD RO Membranes (2), Pump, Pressure Gauge, (Tank not Included) LC200P-MINI Complete with Aluminum Stand, 4.5 x 10 Filters, Gauge, Install Manual $ LC200P - Light-Commercial RO System, Rated 200GPD, 2.5 x 20 Sediment and (2)Carbon Filters, (2)100 GPD RO Membranes (2), Pump, Pressure Gauge, (Tank not Included) LC200P Complete with Aluminum Stand, 2.5 x 20 Filters, Gauge, Install Manual $ LC Series Units rated at 300GPD and 380GPD are available. Call for pricing. 36. Call: (PURE) PURE WATER COMPONENTS Call for products not listed

39 COMMERCIAL REVERSE OSMOSIS SYSTEMS R12 SERIES WALL-MOUNTED RO SYSTEM W/ADJUSTABLE RECOVERY GPD Stainless Steel Frame Automatic Inlet Valve Pre-filter Housing and Cartridge Procon Pump (brass) 1/2 HP Motor Liquid Filled Pump Pressure Gauge Stainless Steel Pressure Vessels Needle Valve for Concentrate Line Needle Valve for Recycle Line Check Valve for Product Water (Stainless Steel) Product Pressure Switch Auto/Off Low-Pressure Shut-Off with Automatic Restart Four Models for Flow Rate to 1200 GPD 3 Packages Available Including Flow Meters, Pressure Gauges and Automatic Fast Flush Optional Leg Kit Applications: Whole House, Process Water, Ice Makers, Labs, Beverages, Coffee Shops, Restaurants, Car-Wash Spot-free, Greenhouses Call for Pricing Call for other RO Systems not listed. WHOLE HOUSE & LIGHT COMMERCIAL UV SYSTEMS Part Number Description List ea. 1+ Watts SmartStream UV SYSTEMS T GPM, 3/8 MPT, 120V $ T GPM, 3/4 MPT, 120V $ T GPM, 3/4 MPT, 120V $ T GPM, 1 MPT, 120V $ VIQUA Standard Series UV SYSTEMS VH200 9 GPM, 17 3/4 x 3 1/2, 3/4 FPT in x 1 MPT out $ VH GPM, 23 1/2 x 3 1/2, 3/4 FPT in x 1 MPT out $ VP GPM, 30 1/2 x 3 1/2, 1 MPT $ VP GPM, 45 x 3 1/2, 1 1/2 MPT $ Larger Capacity Watts and Viqua Systems are Available Replacement Lamps, Sleeves and Ballasts Available for Watts and Viqua Systems WATER SOFTENERS & MEDIA COMMERCIAL & RESIDENTIAL CALL FOR INFORMATION, AVAILABILITY AND PRICING Media Alamo Brand, Aquamatic, Autotol, Calgon, Aquasorb, Catalytic, Clack, Filox, Fleck, GE Performa, Greensand-Plus, Hydrotech, Micor-Z, ScaleNet, Vortech, Watts Media Residential Water Softeners Commercial Water Softeners Water Softener Parts Call for products not listed PURE WATER COMPONENTS Call: (PURE) 37.