DIAPHRAGM SENSING PRESSURE REDUCING VALVE P 7 DN ¼ 3/8
|
|
|
- Aron Preston
- 5 years ago
- Views:
Transcription
1 DIPHRGM SNSING PRSSUR RDUING VLV P 7 DN ¼ /8 DSRIPTION The P7 series direct acting, spring-loaded diaphragm sensing, pressure reducing valves, are designed for use on steam and compressed air and other gases compatible with the materials of construction. They are suitable for pressure reducing stations where very small loads are involved. They are also specifically recommended to operate as pilot valves in combination with other pressure regulators. MIN FTURS ompact design. Stainless steel diaphragm OPTIONS: US: VILBL MODLS: Outlet 1/ gauge connection on body. Regulating screw with top cap. Internal sensing orifice ompressed air top for remote control Stainless steel construction Steam, compressed air and other gases compatible with the construction. P7S arbon steel construction P7SS Stainless steel construction PITIS Valve Size 1/" /8" KVs (m/h) 1, 1, LIMITING ONDITIONS Valve model P7 SIZS: ONNTIONS: INSTLLTION: ORDR RQUIRMNTS : DN 1/ and DN /8 Female screwed ISO7/1Rp(BS 1) or NPT. Horizontal installation. strainer should be provided upstream the valve. See IMI, installation and maintenance instructions. Type of fluid Maximum operating temperature Inlet pressure and required outlet pressure apacity (maximum and minimum). Body design conditions Max.upstream pressure (steam) Max.upstream pressure (gases) Max.downstream pressure Min.downstream pressure PN 0 5 bar 1 bar 17 bar 0,5 bar * Max.design temperature 00 º * 0,07 bar with low pressure top (limited at 7 bar inlet). The low pressure diaphragm should be fitted for outlet pressures from 0,07 up to 0,5 bar. Pressure and temperature may change if soft seating is used. The balance pipe connection is recommended to enter downstream pipe at a minimum 1meter from valve for higher accuracy. The valve can also be supplied with an internal sensing orifice instead of external. MRKING (PD - uropean Directive 97//) PN 16-PN6 DN 08 to 10 ategory SP - art., paragraph VLSTM IS P
2 DIMNSIONS (mm) Screwed SIZ DN B D * F d1** d*** d*** 1/" /8" 1/8" 1/8",8 /8" /8" 1/8" 1/8",8 *Low pressure diaphragm ; ** Sensing line connection *** Optional (pressure gauge connections),can be used also as sensing line connections. MTRILS P7S POS. DSIGNTION MTRIL 1 VLV BODY S55JG / *PILOT VLV BODY F8 / 1.08 *PILOT VLV GSKT OPPR PUSHROD ISI16 / *VLV HD ISI0-PDM-PTF,etc 6 *SPRING ISI0 / TOP OVR S55JG / OVR NUT S55JG / * DIPHRGM ISI01 / *GSKT ST.ST. / GRPHIT 11 LOWR SPRING RRIR BRSS 1 TOP SPRING RRIR BRSS 1 *DJUSTMNT SPRING SPRING STL 1 HNDWHL PLSTI 15 DJUSTMNT SRW ISI0 / LOKNUT ST.STL SPRING IDNT. PLT LUMINIUM 18 BOLTS STL 10.9 * vailable spare parts. ** Stainless steel on request. Remarks: ll valves have a serial number. In case of non-standard valves this number must be supplied if spare parts are ordered. VLSTM IS P
3 ORDRING ODS P7 Valve Model P7S arbon steel pilot regulator P7SS Stainless steel pilot regulator Outlet spring range (see table) Green Black (fitted with two diaphragms) P7S. 1 S S P7S P7SS Steam Gases plication S G Seal material Metal to metal lapped (1) PDM PTF T FPM/VITON V Stainless steel diaphragm Standard diaphragm (a) S Low pressure diapragm L Gauge port 1/8" * Without gauge ports (1) Gauge port on the left side (Related to the flow direction) Gauge port on the right side (Related to the flow direction) Gauge ports on both sides Pipe connection Threaded BSP ISO 7/1 Rp Threaded NPT NSI B1.0.1 Size DN 1/" 08 DN /8" 10 Special valves / xtras b) * Gauge port can also be used as external sensing line. (1) Omitted if a standard valve is requested a) Two diaphragms will be fitted with black spring b)full description or addicional codes have to be added in case of non-standard combination. PRSSUR RNGS IN bar SPRING OLOUR GRN W/1 Diaphragm BLK W/ Diaphragms Red. Pressure Red. Pressure 0,07 to 0,5 bar * 0,5 to bar ** to 17 bar ** / * With low pressure top; **Standard diaphragm. VLSTM IS P
4 DIPHRGM SNSING PRSSUR RDUING VLV P15SS DN ¼ 1/ ; DN15 DSRIPTION The P15 series direct acting, spring-loaded diaphragm sensing, pressure reducing valves, are designed for use on compressed air, water and other gases or liquids compatible with the materials of construction. They are suitable for pressure reducing stations where low capacity is required. onnections are female screwed or flanged. MIN FTURS ompact design. Machined from barstock materials. OPTIONS: US: VILBL MODLS: SIZS: ONNTIONS: INSTLLTION: ORDR RQUIRMNTS: Metal to metal or soft valve. Relieving-Internal relief valve to allow reduce outlet pressure in a no-flow condition. Built-in strainer. Outlet 1/ gauge connection on body. Panel mounting nut and thread. Straight or angle connections. ompressed air, water and other gases and liquids compatible with the construction. Special version available for steam, on request. P15SS Stainless steel. DN 1/, /8 and 1/. DN 15 Female screwed ISO7/1Rp(BS 1) or NPT. Flanged N PN0 / PN6 Special flanges upon request. Horizontal installation. n Y strainer should be provided upstream the valve. See IMI, installation and maintenance instructions Type of fluid Maximum operating temperature Inlet pressure and required outlet pressure apacity (maximum and minimum). Valve Size Body design conditions Max.upstream pressure Max.downstream pressure Min.downstream pressure Max.design temperature * Max.recommended reducing ratio *Other on request. MRKING (PD - uropean Directive 97//) PN 16-PN6 DN 8 to 15 PITIS Valve model 1/" /8" 1/" KVs (m/h) 1,15 1,15 1,5 LIMITING ONDITIONS P15SS PN 6 50 bar 15 bar 0, bar 80 º 0:1 ategory SP - art., paragraph VLSTM IS P
5 DIMNSIONS (mm)-screwed N Flg.PN16/0 N Flg.PN6/100 SIZ DN 1 B D* D* 1/" , /8" , /" , 150 7,5,7 10 5,5,1 * Different lenghts on request. Note: DN15 PN16/0 face to face dim. was adopted as per DN0 MTRILS POS. DSIGNTION MTRIL 1 VLV BODY ISI16 / 1.01 ; F8M / 1.08 TOP OVR ISI16 / 1.01 ; F8M / 1.08 ST ISI16 / 1.01 * GSKT ISI0 / PUSHROD ISI16 / * VLV HD NBR-PDM-PTF,etc 8 * VLV SPRING ISI0 / * STRINR SRN ISI0 / * DIPHRGM ISI01 / * GSKT ST.STL GRPHIT 1 * GSKT ISI0 / SPRING PLT BRSS 15 * DJUSTMNT SPRING SPRING STL 16 TOP SPRING PLT BRSS 17 DJUSTMNT SRW ISI0 / LOKNUT ST.STL HNDWHL PLSTI 0 SPRING IDNT. PLT LUMINIUM * vailable spare parts. Remarks: ll valves have a serial number. In case of non-standard valves this number must be supplied if spare parts are ordered. VLSTM IS P
6 ORDRING ODS P15 Valve Model P15. 1 W N R. 15 P15SS - Diaphragm sensing P15 Outlet spring range Nº1-0, to 1,5 bar Nº - 0, to bar Nº - 0,8 to 8 bar Nº - 1,5 to 15 bar 1 plicattion Water Gases Oxygen (Degreased) Seal material W G O NBR PDM PTF FPM/VITON N T V Maximum inlet pressure 0 bar 50 bar a) D Diaphragm material Stainless steel (Non-relieving) Rubber/PTF (Relieving or non-relieving) S R Gauge port 1/" Without gauge ports Gauge port on the left side (Related to the flow direction) Gauge port on the right side (Related to the flow direction) Gauge ports on both sides (1) Relieving Non-relieving Relieving (Only for non-dangerous gases) (1) R Pipe connection Threaded BSP ISO 7/1 Rp Threaded NPT NSI B1.0.1 Socket weld SW NSI B16.11 H Butt weld BW NSI B16.5 I Flanged N109-1 PN0 N Flanged N109-1 PN6 O Flanged NSI B # U Flanged NSI B # V Flanged NSI B # W Size DN 1/" 08 DN /8" 10 DN 1/" or DN Special valves / xtras b) (1) Omitted if a standard valve is requested a) The 50 bar inlet available only with spring Nº b)full description or addicional codes have to be added in case of non-standard combination. VLSTM IS P
7 DIPHRGM SNSING PRSSUR RDUING VLV P 0D DN ¼ /8 DSRIPTION The P0D series direct acting, spring-loaded diaphragm sensing, balanced valve pressure reducing valves, are designed for use on compressed air, water and other gases or liquids compatible with the materials of construction. They are suitable for pressure reducing stations where small loads are involved. They are also specifically recommended to operate as pilot valves in combination with other pressure regulators. MIN FTURS ompact design. Balanced valve. Machined from barstock materials or investment casting. Ultrasonically cleaned and degreased OPTIONS: US: VILBL MODLS: SIZS: ONNTIONS: INSTLLTION: ORDR RQUIRMNTS : Different soft valves for water and gases. Outlet 1/ gauge connection on body. Regulating screw with top cap. onnection for external sensing line Piston sensing design ompressed air, water and other gases and liquids compatible with the construction. P0D Stainless steel diaphragm sensing P0P St.Steel piston sensing (on request) DN 1/ and DN /8 Female screwed ISO7/1Rp(BS 1) or NPT. Horizontal or vertical installation. strainer should be provided upstream the valve. See IMI, installation and maintenance instructions. Type of fluid Maximum operating temperature Inlet pressure and required outlet pressure apacity (maximum and minimum). PITIS Valve Size KVs (m/h) 1/" 1, /8" 1,8 LIMITING ONDITIONS Valve model Body design conditions Max.upstream pressure Max.downstream pressure Min.downstream pressure Max.design temperature * Max.recommended reducing ratio P0D PN 6 50 bar 15 bar 0, bar 80 º 0:1 *Other on request. MRKING (PD - uropean Directive 97//) PN 16-PN6 ategory DN 08 to 10 SP - art., paragraph VLSTM IS P0D
8 DIMNSIONS (mm) Screwed SIZ DN B d1* d* 1/" /" 1/" 1,8 /8" /" 1/" 1,8 * Optional d1 and d can be used both as pressure gauge connection or external sensing line connection. MTRILS POS. DSIGNTION MTRIL 1 VLV BODY ISI16 / 1.01 ; F8M / 1.08 TOP OVR ISI16 / 1.01 ; F8M / 1.08 ST OVR ISI16 / 1.01 ; F8M / 1.08 * O-RING NBR 5 * PISTON VLV ISI16 / * VLV HD NBR-PDM-PTF,etc 6 PUSHROD ISI16 / * O-RING NBR-PDM-PTF,etc 10 * DIPHRGM PTF 11 * DIPHRGM **NBR 1 GSKT **RUBBR 1 SPRING PLT ISI0 / NUT ST.STL * DJUSTMNT SPRING SPRING STL 16 TOP SPRING PLT BRSS 17 DJUSTMNT SRW ISI0 / LOKNUT ST.STL HNDWHL PLSTI 0 SPRING IDNT. PLT LUMINIUM * vailable spare parts. ** Stainless steel on request. Remarks: ll valves have a serial number. In case of non-standard valves this number must be supplied if spare parts are ordered. VLSTM IS P0D
9 ORDRING ODS P0D Valve Model P0D - Diaphragm sensing Outlet spring range Nº1-0, to 1,5 bar Nº - 0, to bar Nº - 0,8 to 8 bar Nº - 1,5 to 15 bar P0. 1 W N R P0 plication Water W Gases G Oxygen (Degreased) O Seal material NBR N PDM PTF T FPM/VITON V Maximum inlet pressure 0 bar 50 bar a) D Diaphragm material Stainless steel S Rubber/PTF R Gauge port 1/" * Without gauge ports (1) Gauge port on the left side (Related to the flow direction) Gauge port on the right side (Related to the flow direction) Gauge ports on both sides Pipe connection Threaded BSP ISO 7/1 Rp Threaded NPT NSI B1.0.1 Size DN 1/" 08 DN /8" 10 Special valves / xtras b) * Gauge port can also be used as external sensing line. (1) Omitted if a standard valve is requested a) The 50 bar inlet available only with spring Nº b)full description or addicional codes have to be added in case of non-standard combination VLSTM IS P0D
PILOT OPERATED PRESSURE REDUCING VALVES PRV47 (Steel) DN65 DN80
PORTUGAL abcde PILOT OPRATD PRSSUR RDUCING VALVS PRV47 (Steel) DN65 DN80 DSCRIPTION The PRV47 pilot operated pressure reducing valves are designed for use on steam, compressed air, nitrogen and other gases
PRESSURE REDUCING VALVE DIRECT ACTING PRV 25/2 S Forged steel body. Saturated steam, compressed air and other gases compatible with the construction.
PRESSURE REDUCING VALVE DIRECT ACTING PRV / S Forged steel body DESCRIPTION The PRV/S series direct acting pressure reducing valves are designed for use on steam, compressed air and other gases. They are
PILOT OPERATED PRESSURE REDUCING VALVES PRV47 (Steel) PRV47I (St.Steel)
PILOT OPERATED PRESSURE REDUCING VALVES PRV47 (Steel) PRV47I (St.Steel) DESCRIPTION The PRV47 pilot operated pressure reducing valves are designed for use on steam, compressed air, nitrogen and other gases
PILOT OPERATED PRESSURE REDUCING VALVES PRV47/2 DN65 DN100
PILOT OPERATED PRESSURE REDUCING VALVES PRV47/2 DN65 DN100 DESCRIPTION The PRV47/2 pilot operated pressure reducing valves are designed for use on steam, compressed air, nitrogen and other gases compatible
ADCATROL PNEUMATIC CONTROL VALVES PV16 ON-OFF (V16 globe valves series with linear actuators PA series)
TROL PNEUMTIC CONTROL VLVES PV16 ON-OFF (V16 globe valves series with linear actuators P series) DESCRIPTION The PV16G ON-Off valves are single seated, two-way body constructed with in-line straight connections.
NON-RETURN VALVE RT25
NON-RETURN VALVE RT25 DESCRIPTION The RT25 all stainless steel disc check valve has a compact design and was specially designed for use with steam and hot condensate. Connections are female screwed MAIN
Pressure Reducing Valve - PRV 25/2SG. Pressure Reducing Valve - PRV 25 IG
Pressure Reducing Valve - PRV 25/2SG Direct Acting, Forged Steel Body with Soft Seat for Steam upto 180 C The ADCA PRV25/2S series direct acting pressure reducing valves are designed for use on steam,
Pilot Operated Pressure Reducing Valves with Stainless Steel Bodies
Page 1 of 7 TI-P107-01 CH Issue 10 Cert. No. LRQ 0963008 ISO 9001 Pilot Operated Pressure Reducing Valves with Stainless Steel odies Description The pilot operated pressure reducing valves have been manufactured
ADCATROL INTERMITTENT BLOWDOWN VALVES VPA 26 (Fabricated steel)
TROL INTERMITTENT BLOWDOWN VLVES VP 26 (Fabricated steel) DESCRIPTION The VP26 blowdown valve was specially designed for application on steam boilers removing the concentrations of solids avoiding boiler
DP27, DP27E, DP27G, DP27R and DP27Y Pilot Operated Pressure Reducing Valves with SG Iron Bodies
Page 1 of 9 TI-P470-01 H Issue 4 DP27, DP27, DP27G, ISO 9001 DP27R and DP27Y Pilot Operated Pressure Reducing Valves with SG Iron odies ert. No. LRQ 0963008 Description The pilot operated pressure reducing
DP143, DP143G and DP143H. Pilot Operated Pressure Reducing Valves with Cast Steel Bodies
Page 1 of 7 TI-P006-01 CH Issue 11 ISO 9001 Pilot Operated Pressure Reducing Valves with Cast Steel Bodies Cert. No. LRQ 0963008 Description The pilot operated pressure reducing valves have been manufactured
Pilot Operated Pressure Surplussing Valve with Cast Steel Body
Page 1 of 7 TI-P004-01 CH Issue 6 SDP143 ISO 9001 Pilot Operated Pressure Surplussing Valve with Cast Steel Body Cert. No. LRQ 0963008 Description The SDP143 is a cast steel pilot operated pressure surplussing
Special Kv available. Classification according pressure equipment Directive, 2014/68/UE
SELF-OPERATED PRESSURE REGULATORS PRESSURE REDUCING VALVE MODEL PRV45 PRODUCT FEATURES Self-actuating pressure reducing valve balancing by diaphragm used to provide a constant downstream still there being
DP163, DP163G and DP163Y Pilot Operated Pressure Reducing Valves with Stainless Steel Bodies
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
DP143, DP143G and DP143H. Pilot Operated Pressure Reducing Valves with Cast Steel Bodies
TI-P006-01 CH Issue 8 DP143, DP143G and DP143H ISO 9001 Pilot Operated Pressure Reducing Valves with Cast Steel Bodies Cert. No. LRQ 0963008 Description The DP143, DP143G and DP143H pilot operated pressure
,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents
MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product
Process Filtration From Pure to Sterile
rom Pure to Sterile MIN TURS & NITS: High quality stainless steel design xtremely low differential pressure Various connection types rom 60 m 3 /h up to 19.200 m 3 /h INDUSTRIS: ood & everage ngineering
General Purpose Ball Valves CERTIFIED TO ISO 9002 QUALITY STANDARDS
General Purpose all Valves RTIFID TO ISO 92 QULITY STNDRDS VOP- ON-PI RDUD PORT GNRL PURPOS LL VLV 4 2 (8 mm) RON OR STINLSS STL ODY, RPTF STS FIGUR NUMR RON = S-L2-SSG F8M = S-L-SSG STNDRD MTRILS PRT
PF6 Stainless Steel Piston Actuated On/ Off Valves
Page of TI-P7- CH Issue Cert. No. LRQ 9 ISO 9 PF Stainless Steel Piston Actuated On/ Off Valves Description A -port pneumatically actuated on / off stainless steel valve for use on steam, water, air, oil
SPIRA-TROL. ½" to 4" ASME (ANSI) Two-port KEA, KFA and KLA Control Valves
Page 1 of 11 MNGMNT SYSTMS TI-P375-1 Issue 3 SPIR-TROL ISO 91 ½" to 4" SM (NSI) Two-port K, KF and KL ontrol Valves ert. No. LRQ 9638 Description SPIR-TROL is a range of two-port single seat globe valves
SDP143 Pilot Operated Pressure Surplussing Valve with Cast Steel Body
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
SOLENOID VALVES pilot operated, spool type single/dual solenoid (mono/bistable function) brass body, 1/4
SOLNOID VLVS pilot operated, spool type single/dual solenoid (mono/bistable function) brass body, /4 N 0 / Series 55 FTURS The monostable spool valves have TÜV certified I 650 Functional Safety data and
SOLENOID VALVES pilot operated, spool type single/dual solenoid (mono/bistable function) brass body, 1/4
SOLNOID VLVS pilot operated, spool type single/dual solenoid (mono/bistable function) brass body, /4 N 0 / Series 55 FTURS The monostable spool valves in conformity with I 650 Standard (00 route H version)
SOLENOID VALVES pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, 1/4-1/2
SOLNOID VLVS pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, /4 - / N 0 / Series 55 55 FTURS The monostable spool valves have TÜV-XID certified I 650 Functional
SOLENOID VALVES pilot operated, spool type single/dual solenoid (mono/bistable function) brass body, NAMUR, 1/4
FTURS The monostable spool valves in conformity with I 650 Standard (200 route 2 H version) have TÜV certified with integraty levels: SIL 2 for HFT = 0 / SIL for HFT = The solenoid operated spool valves
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
Size : Ends : Min Temperature : Max Temperature : Materials : Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP or NPT, Socket or Butt Welding -20 C + 180 C Max Pressure : 63 Bars up to DN20 Specifications : Anti blow-out stem Locking
SOLENOID VALVES pilot operated, high flow floating diaphragms 3/8 to 1
SOLNOI VLVS pilot operated, high flow floating diaphragms 3/8 to 1 N 3/2 P Series NO 316 TURS rass bodied high flow valves with two floating diaphragms for larger single actuators The solenoid valves vent
SOLENOID VALVES no voltage release (lever type) manual reset construction 3/8 to 1
SOLNOI VLVS no voltage release (lever type) manual reset construction 3/8 to N NO 3 2 3/2 Series 308 TURS Lever type Manual Reset function which means that the valve has to be energized as well as manually
Pressure reducing valves
Pressure reducing valves Pilot Operated 25 Series The Spirax Sarco 25-Series regulators are a versatile family of self-acting pressure regulators with control pilots and interchangeable main valves for
Cipriani Harrison Valves Corp.
Shutoff & Divert Valve pplication Shutoff and divert valves are used in process flow systems for stopping or diverting the flow of liquid. variety of body configurations allows flexibility in designing
PRESSURE REDUCING VALVES
14.01 Part No. 536 536 WRAS APPROVED BRASS BODY WITH BSP THREADED CONNECTIONS SUITABLE FOR WATER & AIR The 536 pressure reducing valve is a economical and reliable solution for water and air applications.
Size : Ends : Min Temperature : Max Temperature : Materials : Carbon steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP or NPT, Socket or Butt Welding -20 C + 180 C Max Pressure : 63 Bars up to DN20 Specifications : Anti blow-out stem Locking
PF6 Stainless Steel Piston Actuated On/Off Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
CATALOG. 2/2 - Way Angle Seat Valves SMART IN FLOW CONTROL.
CATALOG / - Way Angle Seat Valves SMART IN FLOW CONTROL. Description and Features The SED Angle Seat Valve is composed of a /-way angle seat valve body and a pneumatically operated piston actuator, which
MSC-125 and MSC-160 Manifolds for Steam Distribution and Condensate Collection.
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
600, 630. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The /630 pneumatically operated 2/2-way valves have a low maintenance piston actuator which can be controlled by inert gaseous media. They have an integral optical
197C. Valve Group. Series Farris Engineering Pressure Relief Valves
97 Valve Group Series 700 Farris Engineering Pressure Relief Valves Numbering System Selecting and specifying Farris pressure relief valves is simple using the numbering system that follows. Each digit
Bronze Gate Valves. SECTION 2a. Tel: +44 (0) Fax: +44 (0)
SETION 2a ronze Gate Valves Tel: +44 (0)1695 712800 Fax: +44 (0)1695 712820 Email: sales@hattersley.com export@hattersley.com www.hattersley.com ontents ronze Gate Valves ontents Page Figure Number Index
Section 4 Flanges. Edition 3
Section 4 langes dition 3 65 [4] LNGS Specifications SPIITIONS: NSI 16.5 - Pipe langes and langed ittings (merican) S2129 - langes for Pipes, Valves and ittings (ustralian) S4504 - ircular langes for Pipe,
ACCESSORIES ACCESSORIES VALVE BODIES... AC2 CAVITY PLUGS... AC4 MANUAL OVERRIDE OPTIONS... AC9 PILOT PISTON ASSEMBLIES... AC11
SSORIS Section / Description page VLV BODIS... 2 VITY PLUGS... 4 MNUL OVRRID OPTIONS... 9 PILOT PISTON SSMBLIS... 11 STNDRD KNOB SSMBLIS... 12 Page 1 STNDRD BODIS - DLT BODY PORT SIZ P/N STYL / SIZ DIMNSIONS
PNEUMATIC CONTROL VALVES V403 DN65 DN100 (V403 globe valves series with linear actuators PA or EL series)
PNEUMATIC CONTROL VALVES V403 DN65 DN100 (V403 globe valves series with linear actuators PA or EL series) DESCRIPTION The PV403 control valves are three-way valves for mixing or diverting service. The
SV73 Cast Iron Safety Valve
Page 1 of 5 TI-S13-25 H Issue 11 ert. No. LRQ 0963008 ISO 9001 SV73 ast Iron Safety Valve Description The SV73 cast iron series valves are built in conformance to Section I and VIII of the SME oiler and
D I V I S I O N O F M A R S H B E L L O F R A M
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
Gachot Ball Valve Type V16 carbon steel / reduced bore / DN 8 to DN 200
carbon steel / reduced bore / DN 8 to DN 200 Three-piece ball valve featuring a unique design for easy and fast maintenance Features pplications Saturated steam. mmonia, natural gas, propane and utilities.
Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure
Series Thermal Relief Safety Valves Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure Applications The Sempell series provides a complete and comprehensive range
SPIRA-TROL. DN15 to DN50. LE, LF and LL Two-port Control Valves
Page 1 of 10 Cert. No. LRQ 0963008 ISO 9001 SPIR-TROL DN15 to DN100 LE, LF and LL Two-port Control Valves TI-P303-11 CH Issue 2 Description SPIR-TROL is a range of two-port single seat globe valves with
MARINE STRAINERS. APPLICATIONS: ALL COMMERCIAL & MILITARY MARINE MATERIALS: BRONZE (ALL GRADES), STAINLESS STEEL, OTHER ALLOYS
MRIN STRINRS PPLITIONS: LL OMMRIL & MILITRY MRIN MTRILS: RONZ (LL GRS), STINLSS STL, OTHR LLOYS SIZS: 3/8" TO 30" ONNTIONS: UNION NS, SILVR RZ, NPT, FLNG, T. QULITY SYSTM: ISO-9001:2000, RTIFI Y NV SHOK
PRODUCT EVOLUTION. Be careful, our valves Ref.702 are changing
PRODUCT EVOLUTION Be careful, our valves Ref.702 are changing We currently have 2 different types available (according to DN) with different dimension and non-commutable gaskets Old marking : New marking
Automatic Control Valves WATTS EU 100 Series
utomatic ontrol Valves WTTS U Series The Watts Industries range of automatic control valves consist of a hydraulically operated valve, which is controlled by a pilot circuit. The main valve (U ) is the
STAINLESS STEEL PRESSURE REDUCING VALVE PRV ELITE
Pressure (bar) STAINLESS STEEL PRESSURE REDUCING VALVE PRV ELITE MAIN CHARACTERISTICS The stainless steel PRV elite valve is intended for the function of pressure reduction of the fluids such as water,
STAINLESS STEEL ATEX 2/2 SOLENOID VALVE SPU225-X NF
MAIN CHARACTERISTICS The SPU 225-X is a pilot operated ATEX 2/2 solenoid valve in stainless steel. It s intented for the shut-off the networks of agressive fluids no charged in hazardous explosives atmospheres,
P95H Regulator Applications P95H Part Matrix Specifi cations Materials of Construction P95H Flow Coeffi cients Wide Open Coeffi cients
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
Ball Valves in investment cast stainless 2-way
Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out
BERMAD Waterworks. Pressure Relief/Sustaining Valve. Model: WW Series. Features and Benefits. Major Additional Features
Pressure Relief/Sustaining Valve Prioritizing pressure zones Ensuring controlled pipeline fill-up Preventing pipeline emptying Pump overload & cavitation protection Safeguarding pump minimum flow Excessive
SPOOL VALVES pilot operated or air operated, spool type single/dual solenoid or air (mono/bistable function) aluminium body, NAMUR style, 1/4 to 1/2
FTURS SPOOL VLVS pilot operated or air operated, spool type single/dual solenoid or air (mono/bistable function) aluminium body, NMUR style, / to / SO/JOUOMTI solenoid valves satisfy all relevant irectives
DEP7 SG Iron Excess Pressure Valve
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
SOLENOID VALVES pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, NAMUR, 1/4-1/2
SOLNOI VLVS pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, NMUR, / - / / N 5/ 5 5 0 5 5 / 5/ Series 55-55 FTURS The monostable spool valves have TÜV-XI certified
MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 200 Flanged R.F. PN25/40-29 C + 425 C Max Pressure : 40 Bars Specifications : Stainless steel removable filter Bolted
Globe valves Shut-off check valve 200 AE/BE PN DN Globe valves Lift check valve 240 MT PN DN 10-50
Globe valves Shut-off check valve 200 AE/BE PN 10-160 DN 10-50 Globe valves Lift check valve 240 MT PN 10-160 DN 10-50 Admissible operating pressure [bar] at design temperature [ C] 1) Material PN -200-60
GACHOT TYPE V16 BALL VALVES CARBON STEEL / FULL BORE / DN 8 TO DN 150
CRBON STEEL / FULL BORE / DN 8 TO DN 150 Carbon steel, forged body full bore ball valve designed to international and European standards FETURES PPLICTIONS Saturated steam. mmonia, natural gas, propane
DIFFERENTIAL PRESSURE GAUGE DIAPHRAGM OPERATED
DIRNTIL PRSSUR U DIPRM OPRTD OST - R SPCIL TURS M PPROVD NCLOSUR I OPRTIN PRSSUR UP TO 100 bar SIMPL ND COMPCT DSIN COST CTIV RLIL PPLICTIONS ILTRS, YDRULIC SYSTMS, WTR TRTMNT PLNTS, CMICL PLNTS, NTURL
SOLENOID VALVES pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, NAMUR, 1/4-1/2
SOLNOI VLVS pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, NMUR, / - / / N 5/ 5 5 0 5 5 / 5/ Series 55-55 FTURS The monostable spool valves in conformity
Straight Bodied Flanged Valve 7030 DN 15 up to DN 150 PN 16
Straight Bodied Flanged Valve 7030 DN 15 up to DN 150 PN 16 Pneumatically operated straight bodied seat valve for the use in chemical plants, process technology and industrial automation. Unaffected by
Materials : Carbon steel or stainless steel
Size : Ends : Max Temperature : DN 15 to 600 mm Flanges PN10/16/25/40 + 150 C for flange gaskets, 200 C for flanges Max Pressure : 40 Bars for flanges PN40 Specifications : Welding flanges Flat flanges
Ultra Proline. ECTFE (Halar ) Single Wall Piping System
ECTFE ( ) Single Wall Piping System 222 - Specification Natural Ethylene Chlorotrifluoroethylene (ECTFE) Chemical Piping System REV:IN0512HA Materials: ASTM D3275 Class 2 resin. Raw resins are certified
HERZ 7217 V. Integral Fixed Orifice Control Valve HERZ 7217 V. Data sheet 7217 V, Issue Size in mm. STRÖMAX Fig No DN L Lm Rp H SW kv kvs
HERZ 7217 V Integral Fixed Orifice Control Valve Data sheet 7217 V, Issue 1011 Size in mm STRÖMAX Fig No DN L Lm Rp H SW kv kvs TS-V LF 1 7217 50 15 83 28,5 1/2 41 27 0,07-0,45 0,48 TS-V MF 1 7217 59 15
Materials : Carbon steel ASTM A216 WCB
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 300 Flanged R.F. PN25/40-29 C + 425 C Max Pressure : 40 Bars Specifications : Stainless steel removable filter Bolted bonnet
2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel valve body Compact industrial design with long service life /2702 can be combined
1/4" JRPH/JRPL Series
1/4" JRPH/JRPL Series Pressure Reducing Valves PRESSURE REDUCING VALVES The 1/4" LowFlow JRPH Series and JRPL Series are piston operated pressure regulators that offer excellent control at Cv's of 0.20
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance actuator. Normally Closed, Normally Open and Double Acting control functions are available.
SOLENOID VALVES direct operated core disc 1/4
SOLENOI VLVES direct operated core disc / N U NO / Series 70 FETURES Three-way solenoid valves with orifice and pipe connections in valve body enabling convenient installation ompact valve intended for
PFF SERIES FLANGED NETWORK PLASTIC BOX
PFF SERIES FLANGED NETWORK PLASTIC BOX Thnil Dt Prottion lss: IP40 Oprting tmprtur: -10 C ~ +60 C 1 Nw PF plsti s with wll mounting flng ottom dsign. Md of flm-rsistnt ABS UL94V-0 nd vill in off-whit olor.
Materials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 50 mm Threaded BSP or NPT, S.W. or B.W. -30 C in SS and -20 C in carbon steel + 220 C Max Pressure : 100 to 140 Bars Specifications : Antistatic
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally
Materials : Stainless Steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP, NPT, Socket or But Welding -20 C + 180 C Max Pressure : 63 Bars up to DN50 ( 40 bars over ) Specifications : ISO 5211 mounting
SOLENOID VALVES direct operated core disc 1/4
SOLENOI VLVES direct operated core disc /4 N U NO / Series 4 FETURES ompact valve intended for single-acting actuator control Epoxy moulded coil for general service applications oils interchangeable without
ADCATROL Pneumatic Control Valves PV25G (V25G globe valves series with linear actuators PA series)
ADCATROL Pneumatic Control Valves PV25G (V25G globe valves series with linear actuators PA series) DESCRIPTION The PV25G control valves are single seated, two-way body constructed with in-line straight
Size : Ends : Min Temperature : Max Temperature : Materials : Carbon steel ou Stainless Steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP, Socket or Butt Welding -30 C in S.S.and -20 C in carbon steel + 220 C Max Pressure : 63 Bars up to DN50, 40 Bars over Specifications
SOLENOID VALVES direct operated core disc 1/4
SOLNOI VLVS direct operated core disc 1/ U N NO 3 1 2 3/2 Series 32 TURS Three way solenoid valves with orifice and pipe connections in valve body Valves are designed to handle relatively high pressure
YSB SERIES Y - STRAINER
YS SERIES Y - STRINER ronze Y Strainer to 4 100% merican Made Self-ligning Screen Design vailable NPT or Solder onnection Working Pressure (cold non-shock) 125 psi @ 350 F Steam 400 psi @ 150 F WOG RN
Size : Ends : Min Temperature : Max Temperature : Materials : Carbon or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP or NPT, Socket or Butt Welding -20 C + 180 C Max Pressure : 63 Bars up to DN20 Specifications : Anti blow-out stem Locking
R627 High Flow Gas Regulator with Internal Relief
High Flow Gas Regulator with Internal Relief The Relieving Regulator has an internal relief valve that provides protection against over pressurization. As output pressure builds up above the start-to-discharge
SOLENOID VALVES no voltage release (lever type) manual reset construction 1/4 to 1/2
SOLENOI VLVES no voltage release (lever type) manual reset construction 1/4 to 1/2 U 1 3 2 3/2 Series 307 FETURES Lever type Manual Reset function which means that the valve has to be energized as well
Hollow Cone Nozzles. Gas cooling Sulfur Burning dust control water aerating chemical Production Cooling m e t a l T r e a t i n g w A S H i n g
Hollow one s Gas cooling ulfur urning dust control water aerating chemical Production ooling m e t a l T r e a t i n g w H i n g gas scrubbing brine spraying product degreasing D1 HOO ON NOZZ INTRODUTION
Applications. T98H Part Matrix. Specifications. Spring Range. Materials of Construction. T98H Regulator Rebuild Kits. marshbellofram.
TH Back Regulator / Valve The TH monitors upstream pressure and opens to relieve excess pressure increases above setpoint. s a Back Regulator, the upstream pressure is monitored and released downstream
Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way valve has a low maintenance piston actuator which can be controlled by inert gaseous media. It has an integral optical position
STAINLESS STEEL ATEX 2/2 SOLENOID VALVE SPU220-X NF
Pressure (bar) STAINLESS STEEL ATEX 2/2 SOLENOID VALVE SPU220-X NF MAIN CHARACTERISTICS The SPU 220-X is a direct acting ATEX 2/2 solenoid valve in stainless steel. It s intended for the shut-off the networks
2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life /2702 can
PRESSURE RELIEF VALVE CONTROL VALVE
PRESSURE RELIEF VALVE CONTROL VALVE LEHRY Pressure Relief Valve, Sustaining or Backpressure Control Valve is designed to permitting flow when upstream pressure is above the adjustable setpoint of the control
SINGLE ROD Pneumatic. Major Benefits
SINGL ROD Pneumatic SPMNT Major enefits Ideal for shot pin applications Shock pad options reduce noise and minimize end of stroke shock Imperial or metric versions available Simple construction for easy
Hollow Cone Nozzles. Gas cooling Sulfur Burning dust control water aerating chemical Production Cooling m e t a l T r e a t i n g w A S H i n g
Hollow one s Gas cooling ulfur urning dust control water aerating chemical Production ooling m e t a l T r e a t i n g w H i n g gas scrubbing brine spraying product degreasing D1 HOO NOZZ INTRODUTION
Series: CS. 4CS RPM - 60Hz. CS RPM - 60Hz. CS RPM - 50Hz. Close Coupled Regenerative Turbine.
4S - RPM - 60Hz. S - 40 RPM - 60Hz. (See Indivdual curves for symbol number) Symbol Number 4 6 8 0 4 6 8 *MXIMUM HD atalog Number - Phase - Phase / / / / / / ½ ½ ½ 4SM 4S6M 4S6M 4SM 4SM 4S8M 0SM SM 0S6M
2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body vailable with flow direction below and above
Butterfly Valve - Series 200
utterfly Valve - Series 200 utterfly Valve design is the most common type of rotary valve and provides low weight to v Ratio combined with simplicity of design and comparatively low cost. It is a simple
800 m. Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request 8.
Metric Stainless Steel Pipe Seamless to EN ISO 1127 Produced in approx. 6 m lengths other material, dimensions or welded pipe on request S 800 m max. operating pressure for 1.4301 for 1.4571 x s PB -No
Built-in Slam-Shut Valve. Independent pneumatic control Accuracy class: ±5% Response time: 1 second. 1/2, 11/16, and 3/4-inch (13, 18, and 19 mm)
RP Series Regulators Introduction The RP Series regulators are direct-operated with non-balanced trim. Normally they are fitted with a built-in filter. They are produced in the following versions: Types
GW C300 AUTOMATIC WATER CONTROL VALVE PRESSURE REDUCING WITH SOLENOID (electrical actuation)
Ni Al Bronze PART NUMBER Super Duplex Titanium 3 64.515.34 64.515.36 64.515.37 4 64.516.34 64.516.36 64.516.37 6 64.517.34 64.517.36 64.517.37 8 64.518.34 64.518.36 64.518.37 10 64.519.34 64.519.36 64.519.37
Table of contents. Valves 141. Check valves 142. with threaded connector 142. with ISO-flange connection (SAE) 144
Table of contents Valves 4 Check valves 4 with threaded connector 4 with ISO-flange connection (SAE) 44 for manifold mounting 48 Needle valves 5 with threaded connector 5 for manifold mounting 5 for manifold
STANDARDS and SPECIFICATIONS
ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)