Appendix D Outline Dimensions for Model Z2000
|
|
- Reynold Gardner
- 5 years ago
- Views:
Transcription
1 INTERNAL RELIEF VALVE SET AT 150 P.S.I. Appendix D Outline Dimensions for Model Z (0.61) 1/" x 1-9/16" square key 2-1/8 (5.0) NOT FOR RECIRCULATING INSTALLER TO PROVIDE SEPARATE BY-PASS VALVE SET AT 125 P.S.I. MAXIMUM CORKEN, INC. A Unit Of IDEX Corp. 2-1/8 (5.0) 1-1/8 (2.85) 3-1/ (8.25) 5-15/16 (15.08) -9/16 (11.59) 2-3/8 (6.03) 5-1/2 (13.97) 3/ (1.9) Inltet: 2" NPT -9/16 (11.59) 1/2 (1.27) 7/16 (1.11) 2-1/2 (6.35) 9-1/ (23.5) 2-1/2 (6.35) 28
2 INTERNAL RELIEF VALVE SET AT 150 P.S.I. NOT FOR RECIRCULATING INSTALLER TO PROVIDE SEPARATE BY-PASS VALVE SET AT 125 P.S.I. MAXIMUM CORKEN, INC. A Unit Of IDEX Corp. Appendix D Outline Dimensions for Model Z /8 (2.86) 10-15/16 (27.78) -15/16 (12.7) 8-3/ (22.23) 17-1/2 (.3) 1/" NPT 3-7/16 (8.73) 6-3/ (17.1) 2" NPT auxillary inlet 1-15/16 (37.9) 5 (12.70) 2" NPT discharge Internal relief valve 1-5/8 (.13) 5-11/32 (13.57) 3-7/8 (9.8) 8-1/ D (20.95) 1/" square keyway 3" 300 lb ANSI flange inlet 6-5/8 BC (16.83) 1-1/8 (2.86) 2-7/16 (6.2) Eight 7/8" (2.22) diameter holes 29
3 Appendix D Outline Dimensions for Model Z (8.18) (19.5) (2.9) 3" NPT outlet (17.3) 6.06 (15.) 1/" keyway (18.3) (.5) (1.0) 3" NPT inlet 8.35 (21.) (3.2) (.) (3.2) (.) (7.6) (18.3) (7.6).125 (10.5) (7.6).125 (10.5) (13.7) 30
4 Appendix D Outline Dimensions for Model Z /16 (3.01) Internal relief valve INLET 2" NPT auxillary inlet C O R K E N 8 (20.32) 13-13/16 (35.08) 2-5/8 (6.67) OUTLET 3-1/ (8.26) N E K C O R 7 (17.78) 7-3/ (19.69) 16-31/32 (3.08) 10-1/8 D (25.72) 19-1/2 (9.53) 7-7/8 BC (20.00) Inlet: " 300 lb ANSI flange 2-1/8 (5.0) 1-1/ (3.18) 1-1/ (3.17) 5/16" square key 5/16" square key Eight 7/8 (2.22) diameter holes 31
5 Appendix D Outline Dimensions for Model Z500 8-Ø.875 (2.2) on a 6-5/8" B.C. Outlet 3" R.F. 300# ANSI flange 8.69 (21.5) (.8) Inlet " R.F. 300# ANSI flange 5/16" square key (27.3) 1.0 (2.5) 6.5 (16.5) (53.6) (7.3) (7.3) 8-Ø.875 (2.2) on a 7-7/8" B.C. -5/8 (1.587) mounting holes.688 (11.9).688 (11.9) (15.6) 32
6 INTERNAL RELIEF VALVE SET AT 150 P.S.I. NOT FOR RECIRCULATING SET AT 125 P.S.I. MAXIMUM CORKEN, INC. A Unit Of IDEX Corp. 28 Appendix D Outline Dimensions for Model ZH2000 Hydraulic drive adapter assembly INSTALLER TO PROVIDE SEPARATE BY-PASS VALVE 1/" square keyway 2-1/8 (5.0) Char-Lynn Hydraulics, Inc. A Division of EATON 6.2 Cubic Inch / Rev Disc Valve Hydraulic Motor Model No /8 D (2.85) Hydraulic motor 17-11/16 (.90) 10-1/2 (26.63) 3-1/ (8.25) 13/16 (2.06) 8 (20.30) 5-15/16 (15.08) -9/16 (11.59) 2-3/8 (6.03) 5-1/2 (13.97) 3/ (1.9) Inltet: 2" NPT -9/16 (11.59) 1/2 (1.27) 7/16 (1.11) 2-1/2 (6.35) 9-1/ (23.5) 2-1/2 (6.35) 33
7 INTERNAL RELIEF VALVE SET AT 150 P.S.I. NOT FOR RECIRCULATING INSTALLER TO PROVIDE SEPARATE BY-PASS VALVE SET AT 125 P.S.I. MAXIMUM CORKEN, INC. A Unit Of IDEX Corp. Appendix D Outline Dimensions for Model ZH /8 (6.02) 10-15/16 (27.75) 8-3/ (22.22) Char-Lynn Hydraulics, Inc. A Division of EATON 6.2 Cubic Inch / Rev Disc Valve Hydraulic Motor Model No Hydraulic motor Hydraulic drive adapter assembly 3-7/8 (9.8) 6-5/8 D B.C. (16.83) 8-1/D (20.96) 2-7/16 (6.2) 1-1/8 (2.86) 1/" square keyway 3" 300 lb ANSI flange inlet Eight 8-7/8 (2.22) diameter holes 10-15/16 (27.78) -15/16 (12.7) 1-1/8 (2.87) 3-7/15 (8.73) 6-3/ (17.15) 1-15/16 (37.9) Internal relief valve 5 (12.70) 2" NPT discharge 1-5/8 (.13) 5-5/16 (13.57) 3
8 MODEL SERIAL NO. CORKEN,INC. A Unit Of IDEX Corp. OKLAHOMA CITY,OKLAHOMA MADE IN U.S.A. POWER OPERATED PUMP FOR LPG OR ANHYDROUS NH READ CORKEN INSTRUCTION MANUAL BEFORE OPERATING LISTED 656L PAT. NOS. 3,072,066 AND 3,392,677 R Appendix D Outline Dimensions for Model ZH /16 (9.69) 12-3/8 (31.3) 9-3/ (2.77) Char-Lynn Hydraulics, Inc. A Division of EATON 6.2 Cubic Inch / Rev Disc Valve Hydraulic Motor Model No CORO-VANE Hydraulic motor Hydraulic drive adapter assembly Inlet: " 300 lb ANSI flange 10-1/8 D (25.72) 7-7/8 B.C. (20.00) 2-1/8 (5.0) 1-1/ (3.18) 5/16" square keyway Eight 7/8 (2.22) diameter holes Internal relief valve 1-3/16 (3.01) INLET 2" NPT auxillary inlet 8 (20.32) C O R K E N 2-5/8 (6.67) 3-1/ (8.26) OUTLET N E K R O C 13-13/16 (35.08) 7-3/ (19.69) 7 (17.78) 16-31/32 (3.08) 35
9 Appendix D Outline Dimensions for Z Mounting 3" NPT outlet 3" NPT inlet 18-1/8 (6) 3 (7.62) 5-3/16 (13.2) -1/2 (11.) 12 (30.5) 15 (38.1) 1-1/2 (3.8) 7-3/16 (18) 1/" pipe plug Electric motor 7-3/16 (18) 8-1/2 (22) 1-1/ (3) 7-1/2 (19) Adjustable motor slidebase 31-1/2 (80) 3 (86) Use four 1/2" anchor bolts 36
10 Appendix D Outline Dimensions for Z Mounting Inlet " - 300# ANSI Baseplate web 12-1/ (31.12) 1-1/2 (3.81) 5-5/8 (1.30) 17 (3.18) 20 (50.80) Beltguard 8-1/2 (21.59) 1-7/8 (.76) Discharge 3" - 300# ANSI Electric motor 10-3/ (27.31) 10-1/2 (26.67) 9-1/2 (2.13) 1-1/ (3.18) 9-5/16 (23.65) Adjustable motor slide base Use for 1/2" anchor bolts 30-7/8 (78.) 39-1/2 (100.33) 2 (106.68) 37
Model Z4500 Stationary Pump
LPGCVP3C Sales Catalog for Stationary and Truck Pumps Model Z32 Truck Pump Model Z35 Stationary and Truck Pump Model Z45 Stationary Pump Model C51 Direct-Coupled Mounting Model 121 Stationary Coro-Vane
More informationAppendix D Outline Dimensions
Appendix D Outline Dimensions Models 91 691 and F91 F691 Bare with Flywheel L L1 M M1 M M1 L L1 Outline Dimensions Inches (Centimeters) Model A B C D E F G H J K 91, F91 1-13/16 2-3/8 3-11/16 13/32 5/8
More informationSolutions beyond products...
ORIGINAL INSTRUCTIONS IH102C Installation, Operation & Maintenance Manual Model B177 External Automatic Bypass Valve Model B177 External Automatic Bypass Valve Warning: (1) Periodic inspection and maintenance
More informationInstallation, Operation & Maintenance Manual
IH106 Installation, Operation & Maintenance Manual ZV200 Bypass Valve Model ZV200 Bypass Valve Warning: (1) Periodic inspection and maintenance of Corken products is essential. (2) Inspection, maintenance
More informationAUTOGAS 150 SERIES PUMPS INSTALLATION GUIDELINES FOR UNDERGROUND TANK APPLICATIONS
Application Bulletin A Unit of IDEX Corporation No. 13 June 21 AUTOGAS 1 SERIES PUMPS INSTALLATION GUIDELINES FOR UNDERGROUND TANK APPLICATIONS CORKEN, INC. A Unit of IDEX Corporation P.O. Box 12338, Oklahoma
More informationUnderground Tank Applications Installation Guide
IF Underground Tank Applications Installation Guide Coro-Flo Pumps Background: Because of the environmental problems caused by traditional fuels such as gasoline and diesel, the use of alternative fuels,
More informationCoro-Flo Sales Catalog
LPGCFP100C LPG Pumps Coro-Flo Sales Catalog FF-Model DL-Model DLF-Model C-Model Table of Contents General Information What is a Coro-Flo Pump...3 History of the Coro-Flo Pump... 4 Markets Served... 4 Model
More informationZ-Series. Coro-Vane Truck Pumps. For LPG, NH 3, and other Applications
Z-Series Coro-Vane Truck Pumps For LPG, NH 3, and other Applications A Tradition of Excellence Corken, Inc. is recognized as a world leader in the manufacture of LPG pumps and compressors. Corken s exceptional
More informationAppendix D Outline Dimensions
Appendix D Outline Dimensions Model D81 Bare with Flywheel Suction valve unloaders (optional) 5-1/2" (13.) 5-1/2" (13.) 1/4" NPT drain Inlet 2" Weld flange Inlet pressure guage Outlet pressure gauge Outlet
More informationLPG-Series. Compressors and Stationary Pumps for LPG and NH 3 Bulk Plant Applications. A Unit of IDEX Corporation.
LPG-Series Compressors and Stationary Pumps for LPG and NH 3 Bulk Plant Applications Model Z45 Pump Model 491 Compressor Model C12 Pump Model HG62 Compressor A Unit of IDEX Corporation A Tradition of Excellence
More informationBSM ROTARY GEAR PUMPS
FT. MTD. PUMP B-Series pumps are a good choice for a variety of recirculating, mixing, and transfer applications. Typical pumped liquids include solvents, resins, and petroleum products. These pumps are
More informationLPG-Series. Pumps and Compressors. For LPG and NH 3 Stationary Applications
LPG-Series Pumps and Compressors For LPG and NH 3 Stationary Applications A Tradition of Excellence Corken, Inc. is recognized as a world leader in the manufacture of LPG pumps and compressors. Corken
More informationLPG-Series. Compressors and Stationary Pumps for LPG and NH 3 Bulk Plant Applications. Solutions beyond products... A Unit of IDEX Corporation
LPG-Series Compressors and Stationary Pumps for LPG and NH 3 Bulk Plant Applications Model SC24 Pump Model 491 Compressor Model C12 Pump Model Z4500 Pump Model HG602 Compressor Solutions beyond products...
More informationPV Series Vane Truck Pumps
PV Series Vane Truck Pumps ISO 900-008 PV Series Pumps General Introduction Versa vane truck pumps are specifically designed to comply with the pumping requirements demanded by the LPG industry. Bulk delivery
More informationInstallation, Operation & Maintenance Manual
IF102B Installation, Operation & Maintenance Manual Coro-Flo Pumps 150 Models Direct Mount Frame Mount Warning: (1) Periodic inspection and maintenance of Corken products is essential. (2) Inspection,
More informationSolutions beyond products...
ORIGINAL INSTRUCTIONS ID107E Installation, Operation & Maintenance Manual PZ-Series Sliding-Vane Truck Pumps for Refined Petroleum Products and Industrial Solvents PZ7 Model with Standard Bypass Valve
More informationIF102F Installation, Operation & Maintenance Manual Models 060, 075 and 150 Coro-Flo Pumps
IF102F Installation, Operation & Maintenance Manual Models 060, 075 and 150 Coro-Flo Pumps Frame Mount ANSI Flange (FF) and DIN Flange (FD) Direct Mount ANSI Flange (DLF) and DIN Flange (DLD) Warning:
More informationSolutions beyond products...
ORIGINAL INSTRUCTIONS IP00B Installation, Operation & Maintenance Manual Stationary & Mobile Sliding-Vane Pumps for Industrial Applications All Models 5, 52, 72, 02, 32, and 52 D5 Model CDHN052 Model CDBN02
More informationBSM ROTARY GEAR PUMPS
FT. MTD. PUMP The Heavy Duty S-Series pumps are designed to handle a wide variety of liquids and are particularly suitable for bulk transfer applications where long life and dependable service is required.
More informationBack Check Valves A2885 & A2883 (LPG) A2882 (Refined Fuels)
Back Check Valves A2885 & A2883 (LPG) A2882 (Refined Fuels) Installation and Parts L I Q UID C O N T R O L S An IDEX Energy & Fuels Business LC_IOM_BackcheckValves: V2: 0317 TABLE OF CONTENTS INTRODUCTION
More informationCorken Pumps. Corken Coro-Flo Regenerative Turbine Pumps. Corken C Series Coro-Flo Pumps. Corken F Series Coro-Flo Pumps
Corken Coro-Flo Regenerative Turbine Pumps The regenerative turbine pump is the most dependable LP gas pump on the market. The free floating impeller with teeth cut on both sides picks up the fluid and
More informationD1AFF Fleet Fueling Dispensers
D1AFF Fleet Fueling Dispensers (Mechanical Register) 6102 One in a series of the finest dispensers, all designed with you in mind. Compare these features & benefits Compact D1AFF Aluminum Cabinet 1" Neptune
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA3 RA2 DEAN PUMP SERIES RA FAN COOLED HIGH TEMPERATURE HOT OIL PUMPS No Liquid Cooling Required
More informationPIPELINE INJECTION PRODUCTS
PIPELINE INJECTION PRODUCTS DURABLE & RELIABLE SOLUTIONS PIPELINE INJECTION PUMP GP-10 & GP-1 SERIES Flows up to: 210 GPM / BPH / 7,20 BPD (nominal flow) BUSHINGS BACK PULL OUT SEAL HEAD DRIVER SHAFT DRIVEN
More informationT-Brake Motor Parts Information
T-Brake Motor Parts Information 2 4 5 6 7 8 9 1 3 10 14 15 14 13 32 31 33 16 34 14 20 35 36 33 34 30 29 29 28 27 20 26 25 24 REFERENCE NUMBER 13 REFERENCE NUMBER 16 REFERENCE NUMBER 28 Displ. Length Width
More informationLIQUEFIED GAS PUMP INSTALLATION
LIQUEFIED GAS PUMP INSTALLATION Z400C ENGINEERING DATA AND DESIGN HANDBOOK THE APPLICATION OF PUMPS TO LIQUEFIED GAS TRANSFER Although we cannot change the nature of the liquefied gas, there are many things
More informationChar-Lynn Power Steering. Parts Information. 110, 230, and 450 Series. July, 1999
Char-Lynn Power Steering July, 1999 Parts Information Steering Contol Units 001 002 1 2 O-ring Groove 3 O-ring Groove 4 7 3 6 5 Low Input Torque Spring (4)/Spacer (2) Package Standard Input Torque Spring
More informationHydra-Cell T80 Series Pumps Design Advantages
Hydra-Cell T80 Series Pumps Design Advantages An Economical and Environmental Choice Hydra-Cell is a positive displacement, multiple-diaphragm pump featuring a seal-less design that provides full containment
More informationBasic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
More informationEFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date:
Contents Section Page Model Designation 2 Features 3 Standard Specifications 5 Specifications 6 Selection Chart 7 Suction Speed Flow Chart 9 Performance Curves 10 Dimension Drawings 20 Model Designation
More informationIndustrial Pump Catalog
Industrial Pump Catalog Contents Why Corken?........................................................................ i-5 About This Catalog...................................................................
More informationFLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8
FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:
More informationH/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs
H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete specifications. The H-25
More informationWeights: Motor... Lb Pump... Lb Extra Column... Lb
Peerless Pump Company Electric Motor Driven Pump Unit Outline Dimensions 8MAF 250 GPM SECTION 1630 Page 1 December 18, 1998 Notes: 1 This drawing describes sump installation, above ground discharge head
More informationSolutions. We Manufacture. H y d r a u l i c s. Eaton Medium Duty Piston Pump. h y d r a u l i c s
H y d r a u l i c s ydraulics Eaton Medium Duty Piston Pump h y d r a u l i c s Model 70122, 70422, 70423, and 70523 or -Flow Compensated Piston Pumps We Manufacture April 1997 Solutions S o l u t i o
More informationPressure Relief Valves Series. Consolidated Safety Valve
Pressure Relief Valves 1511 Series Consolidated Safety Valve Consolidated Type 1511 safety valves are designed for low pressure, steam heating boilers and steam generators as well as air service applications.
More informationAppendix E Part Details for the PZ7 with Standard Bypass Valve
Appendix E Part Details for the PZ7 with Standard Bypass Valve No. Part No. Description Qty. 568 Pump case 66-X6R Rotor-shaft assembly 57 Vane 6 4 46-X Vane driver 5 9 Sideplate 44-XA Seal assbly. (Buna-N
More informationDisc Valve Motors Integral Cross Over Relief Valve Technical Manual 2000 Series
Disc Valve Motors Integral Technical Manual 2000 Series Introduction Eaton Char-Lynn, your proven low speed high torque motor supplier, now offers the Char-Lynn 2000 Series motor with our proven Eaton
More informationChar-Lynn Power Steering. Parts Information. 217 Series and 227 Series OUT OUT. November, Series (Gerotor Unit) 227 Series (Geroler Unit)
Char-Lynn Power Steering November, 6 Parts Information 27 Series (Gerotor Unit) 227 Series (Geroler Unit) 27 Series and 227 Series Torque Generator 002 Torque Generator Parts Drawing 700 27 Series (Gerotor
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA296 RA3146 RA3186 RA296 The smaller, foot mounted economy version of the air-cooled RA series
More informationSelf-Priming Fiberglass Pumps
Fybroc Division SERIES 16 Self-Priming Fiberglass Pumps B U L L E T I N 16B1 FYBROC THE LEADER IN CORROSION-RESISTANT FIBERGLASS PUMPING EQUIPMENT Fybroc is the leading manufacturer of fiberglass reinforced
More informationMANUAL FOAM SYSTEM MODELS: MFA200 CLASS A FOAM MFA201 CLASS B FOAM MFA220 CLASS A and B FOAM
Document Number: XM-MFA2PM-R0A MFA200 Rev150814 MANUAL FOAM SYSTEM MODELS: MFA200 CLASS A FOAM MFA201 CLASS B FOAM MFA220 CLASS A and B FOAM FIRE RESEARCH CORPORATION www.fireresearch.com 26 Southern Blvd.,
More information3D drawings available at Kg GAS-NPT thread adapters available at page 1.117
These small dry vacuum pumps have a suction capacity of 2 and 4 cum/h. The particular shape of the working chamber and the special graphite, with which the locking flanges and vanes are made, allow these
More informationChar-Lynn. Parts Information. 217 Series and 227 Series Torque Generator 002. Power Steering OUT OUT. No November, 1996
Char-Lynn Power Steering No. 6-34 November, 6 Parts Information 7 Series (Gerotor Unit) 7 Series (Geroler Unit) 7 Series and 7 Series Torque Generator 00 Torque Generator Parts Drawing 700 7 Series (Gerotor
More informationBSM ROTARY GEAR PUMPS
FT. MTD. PUMP BSM bronze pumps are ideal for use where corrosion resistant materials are required such as providing circulation on water-jacketed engines, pumping saline solutions as well as a variety
More informationCorken Compressor Repair
Corken Compressor Repair Click photo to make move Gauge Openings Inspection plate with model and serial #s Oil filter and oil pump assembly Crankcase breather vent Crankcase breather location. If excess
More informationContents Project: Model: Chk d: Date:
Contents Model DSHU6. DSHU6.7 DSHU6. DSU6. DSHU6. DSU6.7 DSHU6.7 8DSU6. 8DSHU6. 8DSU6.7 8DSHU6.7 DSU6. DSU67. Section Page Specifications -7, 8 Selection Chart -7., 8. Performance Curves -6 Outline Drawings
More informationOperation & Service Manual
Operation & Service Manual Model: 06-4035-3600 Hydraulic Service Unit 03/2003 AA Rev. 15 Includes Illustrated Parts List Tronair, Inc. 1740 Eber Road Holland, Ohio 43528-9794 USA Telephone: (419) 866-6301
More informationDATA BOOKLET LSD SERIES. Suction Diffusers. Pumps Motors ISO 9001 Company. Catalogue Pumping Solution
SERIES DATA BOOKLET Suction Diffusers Pumps Motors ISO 9001 Company Catalogue 2011 Pumping Solution CONTENTS INTRODUCTION Page 3 FEATURES AND BENEFITS Page 3 DESIGN FEATURES Page 4 MATERIAL OF CONSTRUCTION
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: 45 gpm (170.4 l/min) Maximum Pressure: 3500 psi (241 bar) T100 Series medium pressure model with Nickel Aluminum Bronze pump head Available
More informationSolutions beyond products...
ORIGINAL INSTRUCTIONS IF0M Installation, Operation & Maintenance Manual Regenerative Turbine Pumps for LPG, NH 3, and Many Other Liquefied Gases and Thin Liquids All Models 0, 2, 3, 4, 6, and 7 DL-Model
More informationH/G-25 Series. Up to 20 gpm (75.7/min) H/g-25 hydra-cell diaphragm pump. H/G-25 Specialized Designs
H/g-25 hydra-cell diaphragm pump H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
More informationCapacity Charts. Direct Spring Acting Safety Relief Valves for Air, Gas, Liquid, and Steam Service
Direct Spring Acting Safety Relief Valves for Air, Gas, Liquid, and Steam Service About Reyco Valve Division The Reyco line of direct spring acting pressure relief valves utilizes sound engineering principles
More informationG04 Series. Maximum Flow Rate: 11.2 l/min (2.9 gpm) Maximum Pressure: 200 bar (2900 psi) for Metallic Pump Heads. G04 with Stainless Steel pump head
G04 Series Maximum Flow Rate: 11.2 l/min (2.9 gpm) Maximum Pressure: 200 bar (2900 psi) for Metallic Pump Heads ATEX G04 with Stainless Steel pump head G04 with Brass pump head G04 with Stainless Steel
More informationDisc Valve Hydraulic Motors Series 4000
Disc Valve Hydraulic Motors Series 0 10.20 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.20 EN EATON_Motoren english Highlights Features 10 displacements, a variety of mounting flanges
More informationSolutions. ydraulics. We Manufacture. H y d r a u l i c s. Char-Lynn Disc Valve Hydraulic Motors. h y d r a u l i c s
H y d r a u l i c s ydraulics Char-Lynn Disc Valve Hydraulic Motors h y d r a u l i c s 4000 Compact Series Standard, Wheel, and Bearingless Hydraulic Motors We Manufacture 11-01-113 EN-0400 Solutions
More informationPRODUCT CATALOG BUILT FOR HEAVY-DUTY PERFORMANCE
PRODUCT CATALOG BUILT FOR HEAVY-DUTY PERFORMANCE MADE IN THE USA 532 CFM Reliable Efficient Cost Effective Exclusive Manufacturer 800-253-5500 887 Vacuum Pump - Page 3 887 Hydraulic Drive Pump - Page 4
More informationCrosby Series 800 and 900 OMNI-TRIM Pressure Relief Valves. Flow Control
Crosby s Series 800 adjustable blowdown and Series 900 fixed blowdown OMNI-TRIM full nozzle pressure relief valves have a simplified, single trim design with superior application versatility. Features
More informationBSM ROTARY GEAR PUMPS
-SERIES FLG. MTD. PUMP PUMP FOOT The BSM -Series pumps are designed to provide quiet and efficient service at standard motor speeds, moderately high pressures. Typical applications are supplying hydraulic
More informationDisc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
More informationSolenoid Operated Block Valves A2800 Series
Solenoid Operated Block Valves A2800 Series Installation and Parts Liquid Controls An IDEX Fluid & Metering Business Installation: M400-40 Table of Contents Introduction Safety Procedures... 3 A2800 Series
More informationNo January, Char-Lynn. Power Steering. Parts Information. 3, 4, 6, and 12 Series Steering Contol Units
Char-Lynn Power Steering No. 6-317 January, 1998 Parts Information Steering Contol Units 001 002 Cap Screws 12 Pt. Drive No. 5389-, Spacer Plate 7970, and End Cap, 8438 (21888 Series 4) are -001 Parts.
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G1 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 13 bar (15 psi) for Metallic Pump Heads 24 bar (35 psi) for Non-metallic Pump Heads API 674 ATEX G1 with Cast Iron pump head G1 with
More informationT100 Series Low Pressure Models T100E, T100F & T100H
T100 Series Low Pressure Models T100E, T100F & T100H Maximum Flow Rate: Maximum Pressure: 96 gpm (366.1 l/min) 3292 BPD 2100 psi (145 bar) T100 Series low-pressure model with Nickel Aluminum Bronze (NAB)
More informationPWD. PWD API 610 BB1 Single Stage Pump
PWD PWD API 610 BB1 Single Stage Pump HYDRAULIC PERFORMANCE COVERAGE FLOW (m 3 /h) 50 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain
More informationIndex. Butterfly Valves
Dry Bulk - Chemical - Petroleum Dry Bulk - Chemical - Petroleum Nozzles Nozzles & Valves & Index Index Part No. Description Page Nozzles P- 202 Overwing Aircraft Refueling, Bronze 1 P- 2022 Overwing Aircraft
More informationPWM API 610 BB3 Multistage Pump
PWM API 610 BB Multistage Pump PWM API 610 BB MULTISTAGE PUMP HYDRAULIC PERFORMANCE COVERAGE 60 Hz Performance Coverage FLOW (m /h) Visit our web site at www.pumpworks610.com and specify flow and performance
More informationValves. Model Code Breakdown. Valves. Steel High Pressure Steel Ball Valves. Steel High Pressure Steel Ball Valves
Steel Ball Steel Ball Model Code Breakdown AB2 N1-1/2 _ 1 1 D B Valve Series Connection Type/Size N NPTF Pipe Thread S SAE Straight Thread Adapter & Stem Seals B Buna - Standard V Viton Bore Restriction
More informationSRS Series. Smooth Return Gas Springs
Smooth Return Gas Springs SRS Series Built in return stroke speed dampening reduces pad bounce as much as 90%! Increases part transfer efficiency Stroke lengths from 125 mm to 300 mm Retrofits to existing
More informationT100 Series Low Pressure Models T100E, T100F & T100H
T100 Series Low Pressure Models T100E, T100F & T100H Maximum Flow Rate: Maximum Pressure: 366 l/min (96 gpm) 145 bar (2100 psi) API 674 T100 Series low pressure model with Stainless Steel pump head Available
More informationInstallation, Operation & Maintenance Manual
Original Instructions if03 Installation, Operation & Maintenance Manual Magnetic Drive Coro-Flo Pump Models MDC0 and MDC2 Model MDC0 Warning: () Periodic inspection and maintenance of Corken products is
More informationSolutions. ydraulics. We Manufacture. H y d r a u l i c s. Char-Lynn Disc Valve Hydraulic Motors. h y d r a u l i c s
H y d r a u l i c s ydraulics Char-Lynn Disc Valve Hydraulic Motors h y d r a u l i c s 2000, 4000, 6000, and 10,000 Series Hydraulic Motors We Manufacture 11-01-878 EN-0201 Solutions S o l u t i o n s
More informationDisc Valve Hydraulic Motors Series 6000
Disc Valve Hydraulic Motors Series 6000 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Features 9 displacements available Presents a multitude
More informationA-C Fire Pump. Fitting and Accessories A-C 100A
A-C Fire Pump Fitting and Accessories A-C 100A A-C Fire Pump Fitting and Accessories Table of Content Page Automatic Air Release Valve... 1 Suction And Discharge Gauge Assembly... 2 Casing Relief Valve...
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 170 l/min (45 gpm) 241 bar (3500 psi) API 674 ATEX T100 Series medium pressure model with Stainless Steel pump head
More informationSolutions. ydraulics. We Manufacture. H y d r a u l i c s. Eaton Directional Control Valves. h y d r a u l i c s. Models and 31930
H y d r a u l i c s ydraulics Eaton Directional Control Valves h y d r a u l i c s Models 319 and 3193 with Pilot Operated Checks We Manufacture No. 11-5 March 1996 Solutions Directional Control Valves
More informationG25 Series API bar (350 psi) for Non-metallic Pump Heads. G25 with Cast Iron pump head
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
More informationNo July, Char-Lynn. Power Steering. Parts Information. 110, 230, and 450 Series Steering Contol Units
Char-Lynn No. 6-321 July, 1999 Parts Information Steering Contol Units 001 002 1 2 O-ring Groove 3 O-ring Groove 4 7 3 6 5 Low Input Torque Spring (4)/Spacer (2) Package Standard Input Torque Spring (6)
More information103 bar (1500 psi) for Metallic Pump Heads
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 13 bar (15 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Brass pump head G35
More informationChar-Lynn Hydraulic Motor. Parts Information. R Series General Purpose Geroler Motor January, 1995
Char-Lynn Hydraulic Motor January, 1995 Parts Information -001-002 General Purpose Geroler Motor 001 002 Parts Dwg/List -002-002 -001-002 -001 Displ. cm 3 /r Ref. No. 13 Ref. No. 16 Ref. No. 19 [in 3 /r]
More informationG03 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G03 Shaft-driven with Stainless Steel pump head
G03 Series Maximum Flow Rate: Maximum Pressure: 11.7 l/min (3.1 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G03 Shaft-driven with Stainless Steel pump
More informationOperation & Service Manual
Operation & Service Manual Technical Manual Model: 02-7813C0100 12 Ton (10.8 Metric Ton) Two Stage Hydraulic Axle Jack 06/2006 Rev. OR Includes Illustrated Parts List Tronair, Inc. 1740 Eber Road Holland,
More informationBRASS BALL VALVES. CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0.
195 Series Ball Valves BRASS BALL VALVES CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0. Hot forged brass body Blow-out nickel plated
More informationParts List 8 AAT-60 and AAT-90 Auto-Adjust II Turbo-Meters
MP-1073C Rev. 3 Parts List 8 AAT-60 and AAT-90 Auto-Adjust II Turbo-Meters Parts List 8 AAT-60 and AAT-90 Auto-Adjust II Turbo-Meters Working Pressures: 175, 275, 720 & 1440 psig Copyright 2001 Invensys
More informationInstallation S19-110BF. Freestanding Drench Shower
Freestanding Drench Shower Table of Contents Pre- Information... Instructions.... 3 Assembly of Components... 4 Parts List... 5 15-1417 Rev. E; ECN 1-05-016A 01 Bradley Page 1 of 5 5/9/01 P.O. Box 309,
More informationFGMDLPG-1 Flow Meter FGMDLPG-1 flow meter is made by cast Aluminum, small size, light weight, used in Liquid Gas Dispenser. Max 5~60L Discharge rate per revolution : 0.5L/r Adjustable Minimum Volume: 0.001
More informationHydraulic Concentrate Control Valve
Hydraulic Concentrate Control Valve DESCRIPTION The standard hydraulic actuated valve assembly consists of a factory assembled and tested quarter turn regular port ball valve to which a hydraulic actuator
More informationPhone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model PRS-09i-FLG In-Line Pressure Reducing Valve Spring diaphragm
More informationInstallation S19-310NN. Frost-Proof Combination Drench Shower and Eyewash (18", 3', 4', 5' or 6' Bury Depth)
Frost-Proof Combination Drench Shower and Eyewash (18", 3', 4', 5' or 6' Bury Depth) Table of Contents Pre- Information...................... 2................................... 3 Assembly of Components.....................
More informationH25 Series. Maximum Flow Rate: 20.0 gpm (75.9 l/min) Maximum Pressure: 1000 psi (69 bar) for Metallic Pump Heads
25 Series Maximum Flow Rate: 2. gpm (75.9 l/min) Maximum Pressure: 1 psi (69 bar) for Metallic Pump eads 25 Series Performance apacities Max. Max. Flow Input @ 1 psi (69 bar) Model rpm gpm l/min 25-115
More informationCLARK SOLUTIONS S Series Rotary Gear Pump Pressure to 200 PSI, Flow to 32 GPM, Drive Speed to 1800 RPM
CLARK SOLUTIONS S Series Rotary Gear Pump Pressure to 200 PSI, Flow to 32 GPM, Drive Speed to 1800 RPM DESCRIPTION Series S pumps are general purpose positive displacement gear pumps and are a good choice
More informationModel DA05 Model DA07 Model DA10
SERVICE & OPERATING MANUAL Original Instructions Quality System ISO9001 Certified Environmental Management System ISO14001 Certified Model DA05 Model DA07 Model DA10 Metallic and Non-Metallic Surge Dampeners
More informationEaton Char-Lynn Low Speed High Torque Orbit Motor for Swing Drive
Eaton Char-Lynn Low Speed High Torque Orbit Motor for Swing Drive 2 Eaton Char-Lynn Low Speed High Torque Orbit Motor for Swing Drive October 2014 Table of Contents Contents General introduction 4 S series
More informationWATEROUS PRESSURE CONTROL SYSTEMS DESCRIPTION: WATEROUS HAS TWO SYSTEMS AVAILABLE FOR CONTROLLING PUMP PRESSURE AS FOLLOWS:
Data Sheet Form No. DS-4004 Issue Date Rev. Date 04/19/96 06/05/09 DESCRIPTION: WATEROUS HAS TWO SYSTEMS AVAILABLE FOR CONTROLLING PUMP PRESSURE AS FOLLOWS: DISCHARGE RELIEF VALVE The automatic discharge
More informationHigh Capacity Direct Operated Pressure Reducing Valve. Features
MK608UBAN Series High Capacity Direct Operated Pressure Reducing Valve The MK608UBAN series are spring loaded, direct-operated, pressure reducing regulators. Their main function is to regulate the outlet
More informationModel RVL-20. Stainless Steel Low-Pressure Diaphragm Relief Valve
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVL-20 Stainless Steel Low-Pressure Diaphragm Relief
More informationPower Steering Units - Eaton / Char-Lynn
A fully fluid linked steering control unit consisting of a manually operated directional control servo valve and with a feedback meter element in a single body. It is used principally for fluid linked
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 170 l/min (45 gpm) 1543 BPD 241 bar (3500 psi) API 674 ATEX T100 Series medium pressure model with Stainless Steel
More informationWeights: Motor... Lb Pump... Lb Extra Column... Lb
Peerless Pump Company Indianapolis, IN 46207-7026 VERTICAL TURBINE FIRE PUMPS Electric Motor Driven Pump Unit Outline Dimensions 8MAF 250 GPM SECTION 1630 Page 1 May 24, 2004 Notes: 1 This drawing describes
More informationWaterous Midship Pump and Accessory Weight Chart
Weight Chart Form No. F 2108 Issue Date Rev. Date 01/91 02/17/98 Waterous Midship Pump and Accessory Weight Chart Waterous Company Since 1886 Printed in U.S.A. CONTENTS Add weight of items required from
More information