Weights: Motor... Lb Pump... Lb Extra Column... Lb
|
|
- Franklin Owen
- 6 years ago
- Views:
Transcription
1 Peerless Pump Company Electric Motor Driven Pump Unit Outline Dimensions 8MAF 250 GPM SECTION 1630 Page 1 December 18, 1998 Notes: 1 This drawing describes sump installation, above ground discharge head with threaded O. L. S. column and driver with bolted down ratchet. 2 Column length "U" minimum is 10 inches and maximum of 50 feet. 3 Dimensions are in inches unless otherwise indicated. 4 Submergence "Z" is minimum for proper priming and or operating 150% of design capacity, based on sea level elevation and a maximum water temperature of 85 o (NFPA Pamphlet No. 20 requirements) Weights: Motor... Lb Pump... Lb Extra Column... Lb Total Lb Discharge Assembly Size Lb. ANSI Discharge Flange A Motor Wt. Each Add'l 10 ft of Column Wt. Lbs. 4 x 4 x 10C x 4 x 10CHP Pump Bowl Size T U Stage Length- First Stage Length- Added V W X Z AA AB AH 4 Stg. Pump Wt. Lb Ea. Add'l. Stg. Wt. Lb. 8MAF Customer Job Name P. O. No. Item No S. O. No. Serial No. Motor Mfr. Enclosure Frame Hp. Volts Ph. Hz. Pump Model No. Of Stages. Rpm GPM Bowl Head Feet Certified for Approval Construction By Date Pump: UL Listed ULC Listed FM Approved Subject to change unless certified for construction DT Rev
2 SECTION 1630 Page 2 October 15, 2002 Electric Motor Driven Peerless Pump Company Note 1: This drawing describes a Vertical Turbine Fire Pump with Above Ground Discharge Head Casting, Threaded Open Line Shaft Column, Motor having bolted down ratchet. Note 2: Column length U dimension is 10 Inches minimum and 50 feet maximum. Note 3: All dimensions are in inches unless otherwise noted. Note 4: Submergence Z is minimum for proper priming and/or operation at 150% of design capacity, based on sea level elevation and a maximum water temperature of 85 o F. per NFPA Pamphlet No. 20. Weights: Basic Two Stage Pump Electric Motor Additional Stages Additional Column Feet Total Discharge Assembly Size A B C E H (125 Lb Flg.) (-S Head) H (250 Lb Flg.) (-SHP Head) J K N P Each Additional 10 Feet of Column Weight Lb x 6 x NA x 8 x 16-1/ x 8 x 16-1/ x 10 x 16-1/ x 10 x x 12 x Pump Bowl Size T U Stage Length- First Stage Length- Added V W X Z AA AB AH 2 Stg. Pump Wt. Lb. Ea. Add l. Stg. Wt. Lb. 10MAF MBF MCF MDF MCF HXBF HXBF Customer Job Name P. O. No. Item No. Invoice No. Serial No Motor Mfr. Enclosure Frame Hp Volts Ph. Hz. Pump Model No. Of Stages Rpm GPM Bowl Head Feet Certified for By Date Pump UL Listed ULC Listed FM Approved DT Subject to change unless certified for construction by factory Rev
3 Peerless Pump Company Types MAF, LDF, MBF, MCF, MDF, HXBF SECTION 1630 Page 2.1 October 15, 2002 Note 1: This drawing describes a Vertical Turbine Fire Pump with Above Ground Discharge Head Casting, Treaded Open Line Shaft Column, Right angle gear having bolted down ratchet. Note 2: Column length U dimension is 10 Inches minimum and 50 feet maximum. Note 3: All dimensions are in inches unless otherwise noted. Note 4: Submergence Z is minimum for proper priming and/or operation at 150% of design capacity, based on sea level elevation and a maximum water temperature of 85 o F. per NFPA Pamphlet No. 20. Note 5: Length R may be adjusted plus or minus 3/8 inch. Note 6: Tapped hole AD is to be connected by the customer to opening marked Raw Water Inlet on the engine outline drawing. Weights: Basic Two Stage Pump Right Angle Gear Additional Stages Additional Column Feet Total Discharge Assembly Size A B C E H (125 Lb Flg) (-S Head) H (250 Lb Flg) (-SHP Head) J K N P Q R S AD NPT Each Additional 10 Feet of Column Weight Lb. 6 x 6 x NA / x 8 x 16-1/ / x 8 x 16-1/ / x 10 x 16-1/ / x 10 x / x 12 x Pump Bowl Size T U Stage Length- First Stage Length- Added V W X Z AA AB AH 2 Stage. Pump Wt. Lb. Ea. Add l. Stage. Wt. Lb. 10MAF MBF MCF MDF MCF HXBF HXBF Customer Job Name P. O. No. Item No. Invoice No. Serial No Gear Mfr. Size Ratio Pump Model No. Of Stages Rpm Gpm Bowl Head Feet Certified for Approval Construction By Date Pump UL Listed ULC Listed FM Approved Right Angle FM Approved DT Subject to change unless certified for construction by factory Rev
4 SECTION 1630 Page 2.2 December 18, 1998 Electric Motor Driven Peerless Pump Company Note 1: This drawing describes a Vertical Turbine Fire Pump with Above Ground Discharge Head Casting, Threaded Open Line Shaft Column, Motor having bolted down ratchet. Note 2: Column length U dimension is 10 Inches minimum and 50 feet maximum. Note 3: All dimensions are in inches unless otherwise noted. Note 4: Submergence Z is minimum for proper priming and/or operation at 150% of design capacity, based on sea level elevation and a maximum water temperature of 85 o F. per NFPA Pamphlet No. 20. Weights: Basic Two Stage Pump Electric Motor Additional Stages Additional Column Feet Total Discharge Assembly Size 8 x 8 x 16-1/2x 250 Lb ANSI 8 x 8 x 16-1/2x 300 Lb ANSI Maximum Working Pressure A B C E H N P K T U X V Each Additional 10 Feet of Column Weight Lb No. of Stages Dimension V Weight Pump Less Driver 10 OLS Column Customer Job Name P. O. No. Item No. Invoice No. Serial No Motor Mfr. Enclosure Frame Hp Volts Ph. Hz. Pump Model No. Of Stages Rpm GPM Bowl Head Feet Certified for Approval Construction By Date Pump UL Listed ULC Listed FM Approved DT Subject to change unless certified for construction by factory Rev
5 Peerless Pump Company Diesel Engine Driven Type 12LDF with Right Angle Gear Drive Dimensional Outline SECTION 1630 Page 2.3 August 28, 2000 Note 1: This drawing describes a Vertical Turbine Fire Pump with Above Ground Discharge Head Casting, Flanged Open Line Shaft Column, Right Angle Hollow Shaft Gear having bolted down ratchet. Note 2: Column length U dimension is 10 Inches minimum and 50 feet maximum. Note 3: All dimensions are in inches unless otherwise noted. Note 4: Submergence is minimum for proper priming and/or operation at 150% of design capacity, based on sea level elevation and a maximum water temperature of 85 o F. per NFPA Pamphlet No. 20. Note 5: Length R may be adjusted plus or minus 3/8 inch. Note 6: Tapped hole is to be connected by the customer to opening marked Raw Water Inlet on the engine outline drawing. Weights: Basic 8 Stage Pump 1542 Lb. Add for Each Additional Stage Add 106 Lb Lb. Right Angle Gear Lb. Additional Column Lb. Feet Lb Lb. Total Lb. Pump Model Discharge Head Size & Discharge Flange ANSI Rating Lb 8 x 8 x 16.5 Discharge Head Maximum Working Pressure PSI A B C E H N P K Q R S T U V X AD AE 12LDF /4-12LDF No of Stages Dimension V Customer Job Name P. O. No. Item No. Invoice No. Serial No Gear Mfr. Size Ratio Pump Model No. Of Stages Rpm 1760 GPM Bowl Head Feet Certified for Approval Construction By Date Pump UL Listed ULC Listed FM Approved Right Angle Gear FM Approved DT Subject to change unless certified for construction by factory Rev. 8-00
6 SECTION 1630 Page 2.4 August 28, 2000 Electric Motor Driven Type 20HXBF Dimensional Outline Peerless Pump Company Note 1: This drawing describes a Vertical Turbine Fire Pump with Above Ground Discharge Head Casting, Flanged Open Line Shaft Column, Electric Vertical Hollow Shaft Motor having bolted down ratchet. Note 2: Column length U dimension is 10 Inches minimum and 50 feet maximum. Note 3: All dimensions are in inches unless otherwise noted. Note 4: Submergence is minimum for proper priming and/or operation at 150% of design capacity, based on sea level elevation and a maximum water temperature of 85 o F. per NFPA Pamphlet No. 20. Weights: Basic Two Stage Pump Electric VHS Motor Additional Column Feet Total 3570 Lb. Lb. Lb. Lb. Lb. Pump Model Discharge Flange ANSI Rating Lb Discharge Head Maximum Working Pressure PSI Variable Dimensions Discharge Flange Holes A T U CF N BC H 20HXBF UNC 20HXBF /8-7 UNC Customer Job Name P. O. No. Item No. Invoice No. Serial No Motor Mfg. Hp Volts Ph Hz Frame Pump Model No. Of Stages 2 Rpm 1760 GPM Bowl Head Feet Certified for Approval Construction By Date Pump UL Listed ULC Listed FM Approved Electric Motor UL Listed DT Subject to change unless certified for construction by factory Rev. 8-00
7 Peerless Pump Company Diesel Engine Driven Type 20HXBF with Right Angle Gear Drive Dimensional Outline SECTION 1630 Page 3 August 28, 2000 Note 1: This drawing describes a Vertical Turbine Fire Pump with Above Ground Discharge Head Casting, Flanged Open Line Shaft Column, Right Angle Hollow Shaft Gear having bolted down ratchet. Note 2: Column length U dimension is 10 Inches minimum and 50 feet maximum. Note 3: All dimensions are in inches unless otherwise noted. Note 4: Submergence is minimum for proper priming and/or operation at 150% of design capacity, based on sea level elevation and a maximum water temperature of 85 o F. per NFPA Pamphlet No. 20. Note 5: Length R may be adjusted plus or minus 3/8 inch. Note 6: Tapped hole is to be connected by the customer to opening marked Raw Water Inlet on the engine outline drawing. Weights: Basic Two Stage Pump 3570 Lb. Right Angle Gear Lb. Additional Column Lb. Feet Lb. Total Lb. Pump Model Discharge Flange ANSI Rating Lb Discharge Head Maximum Working Variable Dimensions Discharge Flange Holes Pressure PSI A Q R S T U CF N BC H 20HXBF UNC 20HXBF /8-7 UNC Customer Job Name P. O. No. Item No. Invoice No. Serial No Gear Mfr. Size Ratio Pump Model No. Of Stages 2 Rpm 1760 GPM Bowl Head Feet Certified for Approval Construction By Date Pump UL Listed ULC Listed FM Approved Right Angle Gear FM Approved DT Subject to change unless certified for construction by factory Rev. 8-00
8 Peerless Pump Company Diesel Engine Driven CLARKE ENGINE OUTLINE (LAYOUT DIMENSIONS) SECTION 1630 Page 4.1 March 27, 1998 ENGINE MANUFACTURER ENGINE MODELS MAXIMUM DIMENSIONS (in Inches) A B C D E F G CLARKE VMFP04HN, HT CLARKE VMFP06HT, T6HT, L6HT,L6HR, T6HR Most controllers may be floor or base mounted. Base mounted controller, as shown with pump and engine is optional. All dimensions are approximate and may be used for general layout purposes only. Certified dimensional outline drawings will be submitted on job when entered at the factory for approval or construction. Subject to change without notice
9 Blank
10 SECTION 1630 Page 6 March Diesel Engine Driven Type 12LDF with Suction Vessel Mounting Arrangement at Discharge Head Assembly Dimensional Outline Peerless Pump Company Note 1: This drawing describes a Vertical Turbine Fire Pump with Suction Vessel Installation Discharge Head Assembly, Flanged Open Line Shaft Column, Vertical Hollow Shaft Electric Motor having bolted down ratchet. Note 2: Maximum suction pressure is 100 PSI Note 3: All dimensions are in inches unless otherwise noted. Note 4: Weights are for basic 3 stage pump unit and suction vessel less driver and weight of water (1.0 SG) contained in vessel Note 5: Installer to allow for grout between top of foundation and bottom of base. Grout thickness is to be determined by installing contractor. Weights: Basic 3 Stage Pump 1720 Lb. 782 Kg each additional 247 Lb (112 Kg) per stage including weight of water stages Lb. Kg Vertical Hollow Shaft Motor Lb. Kg Total Lb. Kg Discharge Head Size Discharge Flange ANSI Rating Lb. Discharge Head Maximum Working Pressure PSI A Wt Head Lb 6x8x16.5T x8x16.5T x8x16.5T x8x16.5T No of Stages Dimension L Dimension X Customer Job Name P. O. No. Item No. Invoice No. Serial No Motor Mfr. Frame HP Volts Phase Hz Pump Model 12LDF No. Of Stages Rpm 1760 GPM Bowl Head Feet Certified for Approval Construction By Date Pump UL Listed Page 1 of 2 DT Subject to change unless certified for construction by factory Rev. 3-98
11 Peerless Pump Company Electric Motor Driven Motor Drive Outline 12LDFwith Suction Vessel Mounting Arrangement at Discharge Head SECTION 1630 Page 7 June 22, 1990
12 SECTION 1630 Page 8 June 22, 1990 Electric Motor Driven Motor Drive Outline 12LDF with Suction Vessel Mounting Arrangement at Discharge Head Assembly Peerless Pump Company
13 Peerless Pump Company Electric Motor Driven Motor Drive Outline 12LDFwith Suction Vessel Mounting Arrangement at Discharge Head SECTION 1630 Page 9 June 22, 1990
14 SECTION 1630 Page 10 June 22, 1990 Electric Motor Driven Motor Drive Outline 12LDF with Suction Vessel Mounting Arrangement at Discharge Head Assembly Peerless Pump Company
15 Peerless Pump Company Electric Motor Driven Motor Drive Outline 12LDFwith Suction Vessel (3-10 Stages) Mounting Arrangement at Discharge Head SECTION 1630 Page 11 June 22, 1990
16 SECTION 1630 Page 12 June 22, 1990 Electric Motor Driven Motor Drive Outline 12LDF with Suction Vessel (11-14 Stages) Mounting Arrangement at Discharge Head Assembly Peerless Pump Company
17 Peerless Pump Company Electric Motor Driven Motor Drive Outline 12LDFwith Suction Vessel (11-14 Stages) Mounting Arrangement at Discharge Head SECTION 1630 Page 13 June 22, 1990
18 SECTION 1630 Page 14 June 22, 1990 Electric Motor Driven Motor Drive Outline 12LDF with Suction Vessel Mounting Arrangement at Discharge Head Assembly Peerless Pump Company
19 Peerless Pump Company Type12LDF with Suction Vessel Mounting Arrangement at Discharge Head Assembly and Right Angle Gear Drive SECTION 1630 Page 15 March 27, 1998 Page 2 of
20 SECTION 1630 Page 16 March 27, 1998 Electric Motor or Diesel Engine Driven Peerless Pump Company RIGHT ANGLE GEAR DIMENSIONS IN INCHES AMARILLO JOHNSON DE'RAN MODEL AG BD D XA MODEL AG BD D XA MODEL AG BD D XA SL H40(12) G40-FM SL40A H G60-FM SL40B H G80-FM SL60A, H80, H80HT G100A-FM SHC60A SL80A, H110, G125A-FM SHC80A H110HT SL100A, H125, G150A-FM SHC100A H125HT SL125A, H150, G200B-FM SHC125A H150HT SL150A, H200, G250A-FM SHC150A H200HT SL200A, HG250, G300A-FM SHC200A HG250HT S HH G350A-FM S HH350HT G400A-FM S HH G450A-FM SL450A, HH425HT F500A-FM SC450A SL500A, HI F590A-FM SC500A SL600A, HI500HT F750A-FM SC600A 1:1 Ratio only, refer to the factory for other ratios. Universal Joint Drive Shaft Dimensions in Inches SHAFT SIZE SC1310 SC1350 SC1410 SC1480 SC1550 SC1610 SC1710 SC1810 SC1880 R (LENGTH) LENGTHEN OR SHORTEN J (MINIMUM ANGLE) 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 J (MAXIMUM ANGLE) APPROX. WT. LBS REV Dimensions are subject to change without notice DT
21 Peerless Pump Company Vertical Turbine Fire Pumps Electric Motor or Diesel Engine Driven Fire Pump Fittings Outline SECTION 1630 Page 21 March 27, 1998 Notes: 1. Only Items Marked will be furnished 2. All Dimensions are in inches 3. Hose Valve Threading -(Specify) Item No. GPM GPM GPM GPM GPM Description Maximum Working Pressure PSIG 9A Hose Valve Head B Hose Valve Head B Hose Valve Head C Hose Valve Head D Hose Valve Head Angle Hose Valve Qty of Wt. Lbs Cap & Chain Qty of Wt. Lbs Drain Valve Discharge Gauge Dial Graduations 18 Gauge Set ( Type Outer Scale Inner Scale Furnished with Gauge Discharge 0 PSI to 300 PSI 0 to 20 BAR Cock) Discharge 0 to 600 PSI 0 BAR to 41 BAR ANSI Std. Dimension Flange Dimen-sion 25 0 Pump Rating GPM W W W W W W Quantity Q Weight Lbs. (Maximum) Item No. 9A 9B 9B 9B 9B 9B 9B 9B 9C 9C 9C 9C 9C DT Subject to change without notice Rev 1-93
22 SECTION 1630 Page 22 March 13, 1998 Electric Motor Driven Fire Pump Fitting Outline Dimensions Standard Pressure Peerless Pump Company Notes: 1. Only Items marked will be furnished. 2. All dimensions are In Inches. 3. Pump flanges must not be used to support weight of fittings. 4A 4. All fitting flanges will conform to ANSI Standard B16.1 and will be: a.} 125 Lb. on relief valve Inlet and relief valve elbow. b.} 150 Lb. on OCV, Cla-Val relief valve inlet and outlet. c.} 125 or 150 Lb. on tee. d.} 125 or 150 Lb. cone Inlet and outlet. 5. All gaskets and bolting are to be supplied by others. 6. All direct acting and pilot operated valves are suitable for a back pressure up to 100 psi. Item Description 4 Discharge Tee Relief Valve Elbow 5 Direct Acting Relief Valve 6 Pilot Operated Relief Valve 7 Overflow Cone 15A Air Release Valve Assembly Manufacturer Model Listing /Approval Pressure Range Psi 3 In 4 In 6 In 8 In Kunkle 218CS164 UL/FM UL/FM UL/FM Not Available 70 to 170 Watts 1116FM UL UL UL UL 20 to 175 OCV OCV 108FCA UL UL UL UL 20 to 175 Cla-Val 50BK4KG1 UL/FM UL/FM UL/FM UL/FM 20 to 200 Must be mounted with stem in vertical position, interchange elbow and relief valve. Rev 3-98 Page 1 of 2 DT Subject to change without notice
23 Peerless Pump Company Indianapolis, IN Diesel Engine Driven Fire Pump Fitting Outline Dimensions Standard Pressure SECTION 1630 Page 23 March 13, 1998 Notes: 1. Only Items marked will be furnished. 2. All dimensions are In Inches. Item Description 3. Pump flanges must not be used to support weight of fittings. 4. All fitting flanges will conform to ANSI Standard B16.1 and 4A will be: a.} 125 Lb. on relief valve Inlet and relief valve elbow. b.} 150 Lb. on OCV, Cla-Val relief valve inlet and outlet. c.} 125 or 150 Lb. on tee. d.} 125 or 150 Lb. cone Inlet and outlet. 5. All gaskets and bolting are to be supplied by others. 6. All direct acting and pilot operated valves are suitable for a back pressure up to 100 psi. 4 Discharge Tee Relief Valve Elbow 5 Direct Acting Relief Valve 6 Pilot Operated Relief Valve 7 Overflow Cone 15B Air Release Valve Assembly Manufacturer Model Listing /Approval Pressure Range Psi 3 In 4 In 6 In 8 In Kunkle 218CS164 UL/FM UL/FM UL/FM Not Available 70 to 170 Watts 1116FM UL UL UL UL 20 to 175 OCV OCV 108FCA UL UL UL UL 20 to 175 Cla-Val 50BK4KG1 UL/FM UL/FM UL/FM UL/FM 20 to 200 Must be mounted with stem in vertical position extra fittings are required refer to factory Rev 3-98 Page 1 of 2 Subject to change without notice DT
24 SECTION 1630 Page 24 September 14, 2004 Electric Motor or Diesel Engine Driven Fire Pump Fitting Outline Dimensions Standard Pressure Peerless Pump Company DISCHARGE TEE ASSEMBLY WITH KUNKLE DIRECT ACTING RELIEF VALVE PUMP MAXIMUM TOTAL RATED WORKING A B C E G H5 J K5 L R ASSEM GPM PRESSURE WT PSI lb ø * DISCHARGE TEE ASSEMBLY WITH PILOT OPERATED RELIEF VALVE PUMP MAXIMUM WATTS OCV CLA-VAL TOTAL RATED WORKING A B C E G H6 J K6 H6 J K6 H6 J K6 L R ASSEM GPM PRESSURE WT PSI lb ø * ø APPLIES ONLY TO 3000 GPM * APPLIES ONLY TO 3000 GPM APPLIES ONLY TO 3500 GPM Page 2 of 2 DT DT Subject to change without notice Rev
25 Peerless Pump Company Electric Motor Driven Fire Pumps Fittings Outline Dimensions High Pressure SECTION 1630 Page 25 March 13, 1998 Notes: 1. Only Items marked will be furnished. 2. All dimensions are In Inches. 3. Pump flanges must not be used to support weight of fittings. 4A 4. All fitting flanges will conform to ANSI Standard B16.1 and will be: a.} 250 Lb. on relief valve Inlet and relief valve elbow. b.} 300 Lb. on OCV, Cla-Val Valve inlet and outlet. c.} 250 or 300 Lb. on tee. d.} 125 or 150 Lb. cone Inlet and outlet. 5. All gaskets and bolting are to be supplied by others. 6. All direct acting and pilot operated valves are suitable for a back pressure up to 100 psi. Item Description 4 Discharge Tee Relief Valve Elbow 5 Direct Acting Relief Valve 6 Pilot Operated Relief Valve 7 Overflow Cone 15A Air Release Valve Assembly Manufacturer Model Listing /Approval Pressure Range Psi 3 In 4 In 6 In 8 In Kunkle 218CS164 UL/FM UL/FM UL/FM Not Available 70 to 200 Watts 1116FM UL UL UL Not Listed or Approved OCV OCV 108FCA UL UL UL Not UL Listed 100 to to 300 Cla-Val 50BK4KG1 UL UL UL Not UL Listed 100 to 300 Cla-Val 50BK4KG1 FM FM FM FM 20 to 200 Must be mounted with stem in vertical position, refer to factory for required fittings to adapt. Rev 3-98 Page 1 of 2 DT Subject to change without notice
26 SECTION 1630 Page 26 March 13, 1998 Diesel Engine Driven Fire Pumps Fittings Outline Dimensions High Pressure Peerless Pump Company Notes: 1. Only Items marked will be furnished. 2. All dimensions are In Inches. 3. Pump flanges must not be used to support weight of fittings. 4A 4. All fitting flanges will conform to ANSI Standard B16.1 and will be: a.} 250 Lb. on relief valve Inlet and relief valve elbow. b.} 300 Lb. on OCV, Cla-Val Valve inlet and outlet. c.} 250 or 300 Lb. on tee. d.} 125 or 150 Lb. cone Inlet and outlet. 5. All gaskets and bolting are to be supplied by others. 6. All direct acting and pilot operated valves are suitable for a back pressure up to 100 psi. Item Description 4 Discharge Tee Relief Valve Elbow 5 Direct Acting Relief Valve 6 Pilot Operated Relief Valve 7 Overflow Cone 15B Air Release Valve Assembly Manufacturer Model Listing /Approval Pressure Range Psi 3 In 4 In 6 In 8 In Kunkle 218CS164 UL/FM UL/FM UL/FM Not Available 70 to 200 Watts 1116FM UL UL UL Not Listed or Approved 100 to 300 OCV OCV 108FCA UL UL UL Not UL Listed 100 to 300 Cla-Val 50BK4KG1 UL UL UL Not UL Listed 100 to 300 Cla-Val 50BK4KG1 FM FM FM FM 20 to 200 Must be mounted with stem in vertical position extra fittings are required refer to factory Rev 3-98 Page 1 of 2 DT Subject to change without notice
27 Peerless Pump Company Electric Motor or Diesel Engine Driven Fire Pump Fitting Outline Dimensions High Pressure SECTION 1630 Page 27 September 14, 2004 DISCHARGE TEE ASSEMBLY WITH KUNKLE DIRECT ACTING RELIEF VALVE PUMP MAXIMUM TOTAL RATED WORKING A B C E G H5 J K5 L R ASSEM GPM PRESSURE WT PSI lb DISCHARGE TEE ASSEMBLY WITH PILOT OPERATED RELIEF VALVE PUMP MAXIMUM Watts OCV CLA-VAL TOTAL RATED WORKING A B C E G H6 J K6 H6 J K6 H6 J K6 L R ASSEM GPM PRESSURE WT PSI lb ø * ø APPLIES ONLY TO 3000 gpm * APPLIES ONLY TO 3000 gpm APPLIES ONLY TO 3500 gpm Page 2 of 2 DT DT Subject to change without notice Rev
28 Blank
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
Weights: Motor... Lb Pump... Lb Extra Column... Lb
Peerless Pump Company Indianapolis, IN 46207-7026 VERTICAL TURBINE FIRE PUMPS Electric Motor Driven Pump Unit Outline Dimensions 8MAF 250 GPM SECTION 1630 Page 1 May 24, 2004 Notes: 1 This drawing describes
More informationApplication & Reference Data Typical Specifications. Section 914 Vertical Turbine Fire Pump
Section 914 Page 101 Supersedes Section 913 Page 101 Dated November 1, 199p Application & Reference Data Typical Specifications Section 914 Section 914 Page 102 Supersedes Section 913 Page 102 Dated November
More informationHORIZONTAL SPLIT CASE SINGLE STAGE DOUBLE SUCTION Type BT
Peerless Pump Company Indianapolis, IN 46207-7026 HORIZONTAL SPLIT CASE SINGLE STAGE DOUBLE SUCTION Type BT SECTION 2030 Page 1 August 15, 1998 Pump Size & Type Suction Flange Size x 125 ANSI Lb. Discharge
More informationVERTICAL TURBINE PUMPS SECTION 115. Discharge Head and Accessories
Peerless Pump Company SECTION 115 Page 0.1 May 19, 2005 Application Data Discharge Head and Accessories INDEX DATA & DIMENSIONS ITEM Type C & CHP 4 Type FA, FRA 7 Type S & SHP 5 Type UG 6 Column Flange,
More informationPeerless Pump FIRE PUMPS. Horizontal Split-Case, Vertical Turbine, In-Line and End Suction. Sterling Fluid Systems (USA), Inc.
Peerless Pump FIRE PUMPS Split-Case, Vertical Turbine, In-Line and End Suction Sterling Fluid Systems (USA), Inc. Brochure B-1500 Fire Protection Fire Pump Units & Packaged Systems You have decided to
More informationA-C Fire Pump. Fitting and Accessories A-C 100A
A-C Fire Pump Fitting and Accessories A-C 100A A-C Fire Pump Fitting and Accessories Table of Content Page Automatic Air Release Valve... 1 Suction And Discharge Gauge Assembly... 2 Casing Relief Valve...
More informationFAIRBANKS FIRE PUMPS JOCKEY PUMP SELECTIONS MODELS 933 & 934
FAIRBANKS FIRE PUMPS JOCKEY PUMP SELECTIONS MODELS 933 & 934 Section 932 Page 393 Supersedes Section 932 Page 393 Dated April 6 2.5 GPM 45 104 FJP-104-2.5 X900101 50 115.5 FJP-115.5-2.5 X900102 55 127
More informationElectronic Control Valves
MODEL 131 Series (Full Internal Port) 631 Series (Reduced Internal Port) Electronic Control Valves Model 131-01/631-01 Simple Proven Design Quality Solenoid Pilot Controls Ideal For SCADA Systems Multi-Function
More informationModel descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60
More informationProduct Numbering System Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC Pump Assembly, Types AC & AE
Index Sheet ITEM S Bulletin Product Numbering System... 1 Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC... 2 Pump Assembly, Types AC & AE... 3-4 Dimensions, Types AC & AE... 5-8 Selection Curves,
More informationTypical Specifications for Horizontal Fire Pumps
Peerless Pump Company Indianapolis, IN 46207-7026 GENERAL: The pumps furnished for fire protection service shall be supplied with the specified drivers, controls and pump accessory items by the pump manufacturer.
More informationJOCKEY PUMPS MTH Tool Co. Series T41, T51, 150, 160 Regenerative Turbine Vane Type. TYPICAL SPECIFICATION MTH Tool Co. Series T41, T51 Pumps
Peerless Pump Company Indianapolis, IN 46206-7026 JOCKEY PUMPS MTH Tool Co. Series T41, T51, 150, 160 Regenerative Turbine Vane Type SECTION 1720 Page 1 August 10, 1992 TYPICAL SPECIFICATION MTH Tool Co.
More informationModel descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.
More informationSERIES WC & WCS. Watchman Series & WCS Condensate Units. Replacement Parts for. Hoffman PARTS LIST DN0436. Hoffman Pump
Hoffman PARTS LIST DN06 REVISION B Watchman Series WC Cast Iron Receiver Single or Duplex Replacement Parts for Watchman Series WCS Steel Receiver Single or Duplex Watchman Series WC & WCS Condensate Units
More informationHydracel High Pressure Pump
Hydracel High Pressure Pump Mfg: Hydracell Model: D10 SL SE SHEHC Stock No. HDPH038.5a Serial No. 99260 Hydracell High pressure Pump. Model D10 SL SE SHEHC, S/N 99260. Inlet (1) 1-1/2 in., Outlet (1) 1
More informationCast Iron Liquid Relief Valves
Cast Iron Liquid Relief Valves Features Bolted bonnet permits easy inspection and servicing without removal from system. Quality cast iron body and bonnet, insert and disc are available in either bronze
More informationEngineers Without Borders
Engineers Without Borders Proposal No: JI12-02-07 04 Item No: ITEM 001 February 7, 2012 Attn: Adam MODEL:VIT-CATM Size:7CHC 10 Stage(s) QTY:1 Operating conditions SERVICE LIQUID LIQUID TYPE CAPACITY RATED
More informationKunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
More informationKunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
More informationSINCE Double Suction Split Case Fire Pump. Series 4800 & (New Generation) 001-cat f
SINCE 1981 Double Suction Split Case Fire Pump Series 4800 & 4900 (New Generation) www.flofab.com 001-cat-2016-4000f Go to www.flofab.com in Our Products Section to see the Master Spec - http://www.arcomnet.com/masterspec/
More informationFLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8
FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:
More informationTYPE ET14 TEMPERATURE REGULATOR CAST IRON, BRONZE or STEEL CONTROLS 20 to 500 F
TYPE ET14 TEMPERATURE REGULATOR CAST IRON, BRONZE or STEEL CONTROLS 20 to 500 F Temperature Regulation for Batch Process Storage Heaters (Water, Fuel Oil or Chemical) Air Heating TYPE ET14 TEMPERATURE
More informationFIRE PUMPS & PACKAGED
4600F Series HSC FIRE PUMPS & PACKAGED Systems FILE NO: 11-1 DATE: December 2004 SUPERSEDES: K13.110 DATE: April 1998 4600F Series Horizontal split case HSC fire pumps Armstrong Holden Brooke Pullen takes
More informationPUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
More informationSeries 4600F. HSC Fire Pumps & Packaged Systems
Series 4600F HSC Fire Pumps & Packaged Systems FILE NO: F43.11 DATE: May 26, 2008 SUPERSEDES: F43.11 DATE: Dec. 15, 2007 Series 4600F Series 4600F - Truly Superior The Series 4600F, drawing on over 100
More informationGH General Horizontal, Close Coupled and Frame Mounted Pumps
GH General Horizontal, Close Coupled and Frame Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The GH Series is Carver s horizontal, end suction pump for handling
More informationHead - m. Flow - US gpm. Comments. Customer : Contact : Re Cotizacion Metro Linea 4 EDB Project : Quote No. :
Customer : Project : Re Cotizacion Metro Linea 4 Page No : 3 Contact : Phone : Fax : Type: PVF - In-Line Close Coupled Fire Item : RCI Electrica Pump Model: Nom. Speed: 2950 RPM, 50 Hz Electric Impeller
More informationBasic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
More informationVERTICAL MULTI-STAGE PUMPS
VR SERIES - 6 HZ FEATURES All 316 stainless steel hydraulic components for superior durability, efficiency, and performance over a wide variety of applications Rugged NEMA motor mounting with oversized
More informationWATEROUS CX SERIES PUMPS. Model Intake Discharge
Data Sheet Form No. DS-1010 Issue Date 04/19/96 Rev. Date 12/18/14 Description: Single Stage Centrifugal Fire Pump Waterous CX Series Fire Pumps are Available as Follows: Model Intake Discharge CXS CXV
More informationFIRE PUMPS F AI LISTED R LISTED N K S MOR S E P U IT Y S Y S T E M CE R T IF IE D
IS O 9 0 0 1 IT Y S Y S T E M R LISTED RBA N K S MOR S E P U MP C F AI LISTED UAL T IF IE D R CE R Q FIRE PUMPS HORIZONTAL SPLIT CASE FIRE PUMP SYSTEM DIESEL ENGINE DRIVEN 1 4 5 2 3 6 7 8 1. Fuel Tank,
More informationSECTION H3 TRAYMASTER SERIES DEAERATORS
SECTION H3 TRAYMASTER SERIES DEAERATORS SAMPLE SPECIFICATIONS PART 1 GENERAL... H3-12 1.1 Packaged Deaerator Specification... H3-12 PART 2 PRODUCTS... H3-12 2.1 Deaerator... H3-12 2.2 Deaerator Vessel...
More informationUNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 4223, 4323 (API 682 Seal) Section 304 Page 304. TABLE OF CONTENTS Features & Benefits...2 Revolvable Pump Casings...2 Materials of Construction...2 Cutaway View & Pump Features...3 Key...4 Specifications...4
More informationCXVT Engineering Data
CXVT Engineering Data H Access Door Both Ends W End Elevation: CXVT Units CXVT-x-1224-x and CXVT-x-1426-x CXVT-x-2424-x and CXVT-x-2826-x 1. Model number denotes R-717 capacity in evaporator tons at a
More informationBourdon Tube Pressure Gauge
6720 Best Friend Road Norcross, GA 30071 Phone: (770) 409-3280 Fax: (770) 409-3290 Bourdon Tube Pressure Gauge Applications Fire sprinkler systems Suitable for all media that will not obstruct the pressure
More informationMOTOR SPEED PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1442 Page 1442.
Page 1442.1 TABLE OF CONTENTS Features & Benefits...2 Standard Materials of Construction...2 Specifications...2 Model Number Key...3 Cutaway View & Pump Features...3 Dimensions C, F, FH Sizes...4 Dimensions
More informationHORIZONTAL SPLIT CASE SINGLE STAGE DOUBLE SUCTION Type AE CHECKING LIST
Section Tab 1200 SINGLE STAGE DOUBLE SUCTION Section 1210 List Prices Removed 07-01-02 Use Rapid Section 1220 Data Page 0.1 & (Blank)(03-30-07) 1 & 2 (03-30-07) 2.1 & 2.2 (03-30-07) 2.21 & 2.22 (03-30-07)
More information5" Submersible Turbine Pump 120 GPM
5" Submersible Turbine Pump 120 GPM Submersible Turbine Pumps Features: n 100% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life
More informationKUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
More informationDate: Project #: Engineer: Prepared By: Bid Date:
NEOTHERM Hydronic Boiler NTH Hydronic Boiler Indoor Sizes 285-850 Date: Submittal Data Project #: Engineer: Project Name: Prepared By: Location: Bid Date: Contractor: Standard Equipment High condensing
More information5" Submersible Turbine Pump 220 GPM
5" Submersible Turbine Pump 220 GPM Submersible Turbine Pumps Features: n 00% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life
More informationEN. 850 Filtrate Pumps. Technical Specification Pages
850 17.01.EN 850 Filtrate Pumps Technical Specification Pages 850 Series Filtrate Pump 850 17.01.EN This page left intentionally blank. 1.0 Overview. The 850 is Carver s filtrate pump line designed for
More informationSeries 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating VENT 'A' FLOW
Series 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating 1/4" NPT VENT 'A' 1/4" NPT 2 - REQ'D 'D' REQ D FOR BASKET REMOVAL 'B' FLOW 'C'
More informationL Q LIQUID-SPECIFIC PRODUCT LINE: CAST IRON ASPHALT PUMPS SERIES DESCRIPTION (34 & 32E) OPERATING RANGE: MODEL NUMBER KEY:
LIQUID-SPECIFIC PRODUCT LINE: SERIES 4A, 4AE, 44A, 44AE, 34A, 434A, 14E, 34E, 34, 3E Section 430 Page 430.1 Issue S SERIES DESCRIPTION (34 & 3E) Viking 34 Series Asphalt Pumps are designed to handle asphalts,
More informationVERTICAL MULTI-STAGE PUMPS
VR SERIES - 6 HZ FEATURES All 316 SS hydraulic components for superior durability, efficiency, and performance over a wide variety of applications Rugged NEMA motor mounting with oversized ball bearings
More informationMosherflo-ST, SU, and STX Self-Priming Pumps
Mosherflo-ST, SU, and STX Self-Priming Pumps 8-339-338 pumps@rbmosherco.com Physical Address: 9 FM 7 San Leon, TX 7739 Mailing Address: Drawer - A Dickinson, TX 7739 www.rbmosherco.com ST & SU Parts List
More informationPRODUCT OF FIRE PUMPS SYSTEMS
PRODUCT OF FIRE PUMPS SYSTEMS 3 SFFECO FIRE PUMPS SYSTEMS MANUFACTURING The Fire Pumps undergo various processes in our modern well organized manufacturing and assembly line. Before delivering to our
More informationDeep Well Pump Control Valve
MODEL 61-02 661-02 Deep Well Pump Control Valve Prevent Surges in Pipelines Simple Hydraulic Operation Adjustable Opening & Closing Speeds Solenoid Control Can Be Operated Manually Proven Reliable Design
More information3340 Series Single Stage End Suction Pumps
3340 Series Single Stage End Suction Pumps Bulletin 3340/Rev. A Model 3344 Aurora 3340 Pump Setting New Standards of Efficiency Liquid handling requirements are much more involved than they were five years
More informationFire Pump Systems. For the protection of life and property, A-C Fire Pump offers package systems that meet every fire protection need.
Fire Pump Systems For the protection of life and property, A-C Fire Pump offers package systems that meet every fire protection need. 2C11829 A-C Fire Pump Systems and Professional Fire Protection... A
More informationNMSU FIRE DEPARTMENT FIRE PUMP ACCEPTANCE TEST
Date Documents Submitted: Log No.: File No.: Plan Examiner: Permit No.: Property Information Building Name: Building Address: Building Manager's Name: Building Manager's Phone: Fax: System Designer/Contractor
More informationModel 133 Models 134 & 135 AURORA 130 SERIES SINGLE STAGE TURBINE TYPE PUMPS
Model Models 4 & AURORA 0 SERIES SINGLE STAGE TURBINE TYPE PUMPS WWW.AURORAPUMP.COM AURORA 0 SERIES Single Stage Turbine Type Pumps Capacities to 0 G.P.M. Heads to 700 Ft. Temperatures to F A Pioneer in
More informationInstructions for Installation, Operation, Care and Maintenance
Bulletin 59 Model DDX Deluge Valve (50 mm), ½ (65 mm), (80 mm), 76 mm, 4 (00 mm), 6 (50 mm), 65 mm & 8 (00 mm) Bulletin 59 Instructions for Installation, Operation, Care and Maintenance Wet Pilot Line,
More informationTECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN. PrimeLine SP SPM & SPH SERIES
TECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN PrimeLine SP SPM & SPH SERIES FEATURES Self Priming Design: Features a replaceable check valve which acts to retain sufficient liquid in the casing
More informationDolan Mechanical, Inc. 638 Johnson Road, PO Box 326 Sicklerville, NJ (856) FAX (856) NO EXCEPTION TAKEN
Dolan Mechanical, Inc. 638 Johnson Road, PO Box 326 Sicklerville, NJ 08081 (856) 629-9331 FAX (856) 629-6545 TO: Imad Haq PROJECT NAME: Philadelphia International Airport Concourse B HVAC Renovation &
More informationIndex - Section 14 End Suction Pump Semi-Open Impeller
Index - Section End Suction Pump Semi-Open Impeller ITEM S Product Numbering System...1 Typical Architects / Engineers Specifi cations - Series 4000...2 Seal Application...3-4 Technical Charts...5-6 Pump
More informationFLUID COOLING Shell & Tube B Series
FLUID COOLING Shell & Tube Series WATER COOLED COPPER & STEEL CONSTRUCTION Features Young Touchstone Interchange Optional Non-Ferrous Construction Competitively Priced 1/4 or 3/8 Tubes Standard Water to
More informationSECTION H4 BOILERMATE DEAERATORS
SAMPLE SPECIFICATIONS PART 1 SECTION H4 BOILERMATE DEAERATORS GENERAL...H4-14 1.01 General...H4-14 PART 2 PRODUCTS...H4-14 2.01 Hardware...H4-14 A. Deaerator...H4-14 B. Make Up Valve and Controller...H4-15
More informationPeerless Pump FULL PRODUCT LINE. Brochure B Sterling Fluid Systems (USA), Inc.
Peerless Pump FULL PRODUCT LINE Sterling Fluid Systems (USA), Inc. Brochure B-1270 Vertical Industrial and Process Axial and Mixed Flow for Large Volume Pumping Encased (Can ) Water and Process Liquid
More informationNEMA Frame. W Premium Brake Motors NEMA. Foot Mounted 3PH, 60 Hz Aluminum Construction /5T 4.5
W Premium Brake Motors NEMA NEMA Foot Mounted 3PH, 60 Hz Aluminum Construction Performance - Page 77 Dimensions - Pages 67-68 Plus Additional Length shown below FOOT MOUNTED CC133B HP RPM FRAME BRAKE 230/460*
More informationAxial and Mixed Flow Pumps for Large Volume Pumping
Vertical Industrial and Process Vertical close coupled single or multi-stage turbine pumps. Axial and Mixed Flow for Large Volume Pumping Vertical pumps for handling water in large volumes. Mixed flow
More information68 Universal RAI-G PD Blower Visit us online:
Authorized Howden Roots Distributor, Warranty, Service & Repair Facility 68 Universal RAI-G PD Blower Visit us online: www.fraserwoods.ca Call 1-780-962-1827 for technical, application and sales support.
More informationWATEROUS CS SERIES PUMPS DESCRIPTION: MIDSHIP MOUNTED SINGLE STAGE CENTRIFUGAL FIRE PUMP
Data Sheet Form No. Issue Date Rev. Date 04/19/96 3/2/17 DESCRIPTION: MIDSHIP MOUNTED SINGLE STAGE CENTRIFUGAL FIRE PUMP WATEROUS CS SERIES CENTRIFUGAL FIRE PUMPS ARE AVAILABLE AS FOLLOWS: CS Single Stage:
More informationTEMPERATURE REGULATORS W91/W94 Series
Self-Operated Temperature Regulators Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company Self-Operating Design Indicating
More informationModel Z4500 Stationary Pump
LPGCVP3C Sales Catalog for Stationary and Truck Pumps Model Z32 Truck Pump Model Z35 Stationary and Truck Pump Model Z45 Stationary Pump Model C51 Direct-Coupled Mounting Model 121 Stationary Coro-Vane
More informationModel CBEX Elite HP
Model CBEX Elite 100-800 HP TABLE OF CONTENTS FEATURES AND BENEFITS.....................................................3 PRODUCT OFFERING.........................................................3 DIMENSIONS
More informationCXVB Engineering Data
CXVB Engineering Data Access Door Both Ends H 8-5 3/4 1 1-2 5-11 3/4 1 1-2 5-11 9-0 3/4 Connection Side: CXVB 8 x 6, 8 x 9, 8 x 12 and 8 x 18 Units CXVB 8 x 6 Units CXVB 8 x 9 Units 1 1-2 12 12-0 0 CXVB
More informationTrash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service
Trash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service WIDE RANGE OF APPLICATIONS: Liquids Entrained with Solids General Industrial, Pulp & Paper,
More information45HB, 70HB. High Pressure Centrifugal Booster Pump MODEL. WARNING: This is a booster pump. It has no lift capability. DO NOT RUN DRY. DO NOT DEADHEAD.
High Pressure Centrifugal Booster Pump MODEL 45HB, 7HB APPLICATIONS Wide variety of industrial, commercial and agricultural uses, especially: High rise buildings Multiple dwelling buildings Reverse osmosis
More informationInstallation Manual. Automated Fuel Maintenance System FTI-5A FUEL TECHNOLOGIES INTERNATIONAL
Installation Manual Automated Fuel Maintenance System FTI-5A FUEL TECHNOLOGIES INTERNATIONAL Replacement Manuals Available on Website: www.fueltechnologiesinternational.com 07/15/2015 Rev E Fuel Technologies
More informationSeries
MTH PUMPS 15 25 26 17 27 Series Flexible Coupled Capacities to 15 GPM Heads to 115 Feet Low NPSH Requirements Page 1-19 15 17 25 26 27 LIMITATIONS Discharge Pressure Seal Pressure* Suction Pressure (Min.)
More informationGrinnell Grooved Fire Protection Products Grooved Fittings
Technical Services: Tel: (800) 38-932 / Fax: (800) 79-5500 www.tyco-fire.com Grinnell Grooved Fire Protection Products Grooved Fittings General Description LPCB Vd S The grooved fittings provide an economical
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
More informationSAMPLE SPECIFICATIONS
SAMPLE SPECIFICATIONS CONTENTS PART 1 GENERAL...H1a-12 1.1 DEAERATOR SPECIFICATION...H1a-12 PART 2 PRODUCTS...H1a-12 2.1 HARDWARE...H1a-12 A. Deaerator...H1a-12 B. Make Up Valve and Controller...H1a-14
More informationParts List. and Kits PARTS LIST & KITS CONTENTS. Parts List. Spare Part Kits Accessories Special Tools Standard Tools Tools for Torques
GRUNDFOS Pumps Corporation 3131 N. Business Park Avenue Fresno, CA 93727 Parts List and Kits CONTENTS Parts List Spare Part Kits Accessories Special Tools Standard Tools Tools for Torques L-CR-SM-012 NEW
More informationSubmittal Data 3450 RPM 60 Hertz JOB or CUSTOMER:
Redi-Flo4 Environmental Submersible Pumps 5E Submittal Data 3450 RPM 60 Hertz JOB or CUSTOMER: ENGINEER: CONTRACTOR: SUBMITTED BY: APPROVED BY: ORDER NO: SPECIFICATION REF: QUANTITY TAG NO. MODEL NO. GPM
More information900 Series Split Case Fire Pump Systems
BULLETIN 900/REV. E 900 Series Split Case Fire Pump Systems MODEL 481 MODEL 483 FM Approved U L Listed motralec 4 rue Lavoisier. ZA Lavoisier. 95223 HERBLAY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48
More informationInstallation. Installation. 12. System Diagram... 10
Pressure Control Systems Installation Instructions Form No. F-1031 Section 3010 Issue Date 08/20/96 Rev. Date 9/11/17 Table of Contents Discharge Relief Valve System System Description....................................
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
More informationFire Protection. FP-XA End Suction
Fire Protection FP-XA End Suction PRODUCT BULLETIN MODEL FP-XA END SUCTION CPS Model FP-XA End Suction pumps are used in a variety of fire fighting applications. These rugged and efficient centrifugal
More informationSECTION METERS AND GAUGES
SECTION 22 05 19 PART 1 GENERAL 1.1 DESCRIPTION OF WORK: A. Extent of meters and gauges required by this section is indicated on drawings and/or specified in other Division-22 sections. B. Types of meters
More informationUNIVERSAL PRODUCT LINE: CAST IRON NON-JACKETED PUMPS SERIES DESCRIPTION TABLE OF CONTENTS RELATED PRODUCTS OPERATING RANGE:
Page 1401.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features (124A/AE, 4124A/AE, 324A, 4324A)...4
More informationBristol: A History & Future.
Fire Pumps Bristol: A History & Future. In 1971, seven emirates joined forces to create the United Arab Emirates, with the goal of becoming a growing leader on an international scale. The UAE s focus has
More informationInstalled on the pump suction, CRISPIN Foot Valves prevent the
Foot Valves Crispin Foot Valves SERIES Valve Function Maintains pump prime upon pump outage Features Resilient seat provides positive shut off Full flow area Stainless steel inlet screen Rugged construction
More informationEFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date:
Contents Section Page Model Designation 2 Features 3 Standard Specifications 5 Specifications 6 Selection Chart 7 Suction Speed Flow Chart 9 Performance Curves 10 Dimension Drawings 20 Model Designation
More informationSeries Low Pressure Steam Heating Boiler Safety Valves
12-200 Series Low Pressure Steam Heating Boiler Safety Valves Section IV Heating Boilers Medium capacity safety valves protect ASME Section IV low pressure steam heating boilers. Cast bronze, full nozzle
More informationCOVER PLATES & ROLLERS
COVER PLATES & ROLLERS 9035-10 Revised 8/95 FOR MODELS - ALL 3/98 Item Part Number Part Description Qty. 1 9035--1--10 Top Cover Plate 1 2 62--425 3/8NC x 3/4 Hex Washer Thread Cutting Screw 8 3 62--544
More informationTECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS
TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and
More informationDate: Project #: Engineer: Prepared By: Bid Date: 30 psi pressure relief valve 50 psi pressure relief valve 60 psi pressure relief valve
NEOTHERM Hydronic Boiler NTH Hydronic Boiler Date: Indoor Sizes 285-850 Submittal Data Project #: Engineer: Project Name: Prepared By: Location: Bid Date: Contractor: Standard Equipment Large LCD display
More informationOR STAINLESS STEEL CONSTRUCTION
FLUID COOLING Shell & Tube Series 92 COPPER/STEEL OR STAINLESS STEEL CONSTRUCTION Features API/BASCO Interchange ASME Code Option Preferred for New Oil-Water Applications C-Series / SSC Series Rugged Steel
More informationModel CV-1FR Grooved-End Riser Check Valves 2 Inch to 12 Inch (DN50 to DN300) General Description. Installation. Technical Data
Worldwide Contacts www.tyco-fire.com Model CV-FR Grooved-End Riser Check Valves Inch to Inch (DN0 to DN00) General Description The TYCO Model CV-FR Grooved- End Riser Check Valve is a compact and rugged
More informationSeries PVP Variable Volume Piston Pumps
Series PVP Variable Volume Piston Pumps Catalog HY28-2661-CD/US zp2 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference Only
More informationPUMP PERFORMANCE TEST
Performance by Weis Fire & Safety as Per NFPA 1911-2012 and ISO Standards Recommended On Rated and n-rated Fire Service Performed With A Draft Commander 3000 Using Clean Clear Water 1911-86 INSPECTION,
More informationPriming Systems Installation Instructions
Priming Systems Installation Instructions System Components: Single Priming Pump: Single VAP Valve Systems: Control Panel Activated... 2 Auto Prime (Pressure Switch) Activated... 3 Multiple VAP Valve Systems...
More informationHYDROMATIC HE8/HE12/HE20/HE25/ HE30/HE35/HE50 HIGH HEAD FILTERED EFFLUENT
PERFORMANCE DATA Wholesale Products Page: 6650-1 RPM: 3450 Discharge: * Solids: ⅟₁₆ 8 GPM 500 3/4 HP 0 2 4 6 8 10 12 14 16 18 20 HP ¾ 1 12 GPM Voltage Pump Model HE8-51 HE8-52 HE8-72 HE8-12 25 GPM 0 0
More informationSeries CC Condensate Units
Bulletin S-215F Series CC Condensate Units Simplex or Duplex 1,000 thru 15,000 sq. ft. EDR 250 thru 7,500 lb./hr. Cast Iron Receivers: for years of dependable service; warranted for 20 years from date
More informationInstallation Manual FTI-10A & FTI-20A SINGLE TANK. Automated Fuel Maintenance System FUEL TECHNOLOGIES INTERNATIONAL
Installation Manual Automated Fuel Maintenance System FTI-10A & FTI-20A SINGLE TANK FUEL TECHNOLOGIES INTERNATIONAL 05/01/2016 Rev A Fuel Technologies FTI-10A & FTI-20A Single Tank Installation Manual
More informationInstallation Manual. Automated Fuel. Maintenance. System FUEL TECHNOLOGIES INTERNATIONAL LLC
Installation Manual Automated Fuel Maintenance System FTI-10A & FTI-20A FUEL TECHNOLOGIES INTERNATIONAL LLC Replacement Manuals Available on Website: www.fueltechnologiesinternational.com 03/01/2011 -
More informationIn-Duct High Pressure Nozzle Humidification System - HP HVAC Series Submittal Drawings
In-Duct High Pressure Nozzle Humidification System - HP HVAC Series Submittal Drawings Date: Job Name: Contractor: Contractor or Order No.: Engineer: Agent: Agent P.O. No.: Date Ordered: Date Required:
More informationG2C and G2S Series Vertical Cantilever and Sump Pumps
G2C and G2S Series s Technical Specification Pages This page left intentionally blank. 1.0 Overview. Carver s vertical pump line is designed for moderate to high flow rates. It includes a cantilevered
More information