New Frontiers in Safety, Security and Comfort.

Transcription

1 New Frontiers in Safety, Security and Comfort. Sanda Plant PATLITE INDONESIA (FACTORY) Headquarters Tokyo Office PATLITE (U.S.A.) 8-8, Matsuyamachi, Chuo-ku, Osaka, Japan International Division TEL FAX South Western Ave., Torrance, Ca 900 Teinfaltstrasse 8/ Stock, 00,Vienna,Austria No. Leng Kee Road, #0-0 Thye Hong Centre,Singapore TEL TEL TEL sales@patlite.com FAX info@patlite.co.at FAX sales@patlite.com.sg FAX Block E, No.9 FL, Hua Du Bldg., No Zhang Yang Road, Pudong Dist., Shanghai China 00 TEL sales@patlite.cn FAX No.0, Fu Rong Rd., Qingdao E.&T. Development Zone,Qingdao, China, 666 TEL FAX LOT Batamindo Industrial Park, Jalan Beringin Mukakuning, Batam 9, Indonesia TEL FAX To ensure correct use of these products, read the Instruction Manual prior to use. Failure to follow all safeguards can result in fire, electric shock, or other accidents. Specifications are subject to change without notice. ISO00/ISO900Certified Headquarters/Sanda Plant/Techno Center PT. PATLITE INDONESIA This publication is chlorine free. 0C 0706J(J)/L(TS)D For the benefit of mankind and the earth, PATLITE is committed to developing environmentally friendly products.

2 B C E H K L BD BM BT BV CLB CLE CLF CLM CT EB EDLM EDWM EVB EVW EW EWH EWHS Product Index HP 77 KG KHE KJ KJB KJPV KJS KJSB KJT KP-A KPE KX LAS LCE LCE-U LCS LE LE-C LE-D LE-E LES LGE LGEH LGH LHE LHE-C LHE-D LHE-E LME LME-U LME-S LME-Q LMS LU LU7 LU7-V LU7-XE M N P R S W X OPTIONS ME-A MES-A MP MPS MV NE- PES PEW PS PSF PSX PV PVB PVW RES-A RH-A RHE RK-A RKE RKPV RKT RLE RT RU RS RV-A SE-D SKC-A SKH-A SKHB-006A SKHE SKH-EA SKL-A SKLB-A SKP-A SKV-A STD WE WEP WEP-C WEP-D WEP-E WH-A WM WME-A XL XP Optional Parts 9 Replacement s Wiring Diagrams ~9 Sound Selection Chart 0 PATLITE is Number for Signaling Technology. Combining innovative technology and advanced optical design, PATLITE s signaling products deliver the highest level of illumination and reliability with protection up to IP-6*. Featuring a broad selection of models, sizes, designs and optional accessories, you can find the best solution for specific requirements. PATLITE s quality standard guarantees long-term customer satisfaction in diversified applications. There is no better choice for signaling products than PATLITE for now and the future. PATLITE is number one in the world for signaling solutions. Note: *Some models are not IP 6-rated. Outstanding Illumination PATLITE s high-intensity s and innovative lens design ensure outstanding illumination and exceptional brightness from any direction and distance. Low Consumption PATLITE s high-intensity s are 8 times more efficient than conventional incandescent bulbs. Long Service Life and Reliability PATLITE s high-intensity s promise an extended service life of 00,000 hours. That is more than years of continuous operation! uced Maintenance and Labor PATLITE s high-intensity s drastically reduce costly maintenance requirements for replacing bulbs. The life of PATLITE s high intensity s is over 6 times longer than conventional incandescent bulbs. Environmentally Responsible Rugged and Robust Design Incandescent bulb Incandescent bulb Many PATLITE products use lead-free technology, and are RoHS compliant. In addition, long-life s reduce waste compared to conventional incandescent bulbs. PATLITE s design with a center shaft in its signal tower ensures the structural integrity of the modules, promising protection against vibration and mishandling. Yet, it offers modularity and flexibility for changing the modules. The smooth-finished body surface prevents collection and adhesion of dust, making our products easy to clean. PATLITE s signaling products are constructed using world-class quality materials to withstand harsh production environments. Patented Reflection System PATLITE s patented reflection system is optimized for full illumination over the entire lens. KW/year 0KW/year Note: For one module and one bulb with continuous operation over years less thanyear Note: Both with continuous operation Incandescent bulbs replacement

3 LHE-E ø70 Signal Tower LCE ø0 Signal Tower SE-D ø7 WEP-C LHE-D LCE-U STD Profile 7.mm ø70 ø0 ø7 Signal Tower ME-A MES-A LCS LME ø ø0 Index of ingress protection defined by CEI / IEC 9 IP WEP-E Profile 7.mm LE-E ø0 LE-C ø0 First digit: Protection level against human body and solid foreign objects No protection. Protection against solid objects larger than ø0mm. Protection against solid objects larger than ømm. Protection against solid objects larger than ø.mm. Protection against solid objects larger than ømm. Protection against dust-limited ingress (dust-protected). Total protection against dust (dust-tight). Code No Second digit: Protection level against water intrusion No protection. Protection against vertical falling drops of water. Protection against dripping water when tilted up to Protection against spraying water. Protection against splashing water. Protection against water jets. Protection against heavy seas. Protection against the effects of immersion. Protection against submersion. LHE-C 9 ø70 WEP-D 9 Profile 7.mm LE-D 9 ø0 Light Source Symbols Used in this Catalog High intensity s with 00,000 hours service life and low power consumption. Xenon Xenon bulb provides high visibility. Halogen Small, bright, and long-life halogen bulb. Economical. Readily available from PATLITE. Sound Electronic Sound Channels sound: Easy to recognize and gentle on the ears. The total recording time can be divided by the number of channels for making several different messages. Messages conveyed audibly. 8dB at m Max. sound pressure level will change based on the recorded contents such as melodies, alarms or messages. Easy to hear alarms, chimes and melodies, but gentle on the ears. MP MPS ø0 WE WEP Profile 7.mm PATLITE s audible alarm products may contain copyrighted music or songs. Patlite has not applied for permission to use the music or songs outside Japan, so please contact your local copyright association before using certain audible products. This disclaimer may not apply if the copyright association has not claimed the copyright of the music or songs in a particular country or jurisdiction. Types of Protection Drip-proof Dust-proof Sealed housing protects against water, including rain. Suitable for outdoor use. Highly sealed design keeps dust and dirt out. Suitable for outdoor use. Water-proof Explosion-proof Provides imperviousness even to direct water jet. Meets the explosion- proof standard Specifications IP6 Classification of dust-proof, jet flow-proof. Refer to the list above for details. NPN/PNP Open collector Open collector allows direct connection to a PLC without using contacts. LE LES ø0 LU ø0 ø60 Dual-face reflector The symmetrical dual-face reflectors emit a powerful rotating light. Use of lead-free solders in consideration of the environment. RoHS compliant products. CAUTION To ensure correct use of these products, read the Instruction Manual prior to use. Failure to follow all safeguards can result in fire, electric shock or other accidents. Specifications are subject to change without notice

4 Signal Tower Revolving Warning Light Revolving Warning Light Revolving Warning Light Revolving Warning Light Signal Tower Signal Tower Signal Light Signal Light Signal Light LHE 9 9 LMS 7 7 ø60 ø70 LME-S LME-Q ø60 LME-U ø60 LGE 7 7 ø00 NE- ø7 EDLM EDWM LGH 9 9 LGEH 9 9 ø00 ø00 PS PSF 7 7 ø8 XP 6 6 ø6 KX ø00 KHE 9 9 ø00 PSX 8 8 ø8 LU7 ø70 WME-A WM LU7-XE LU7-V ø70 ø70 W70 D80 W70 D80 XL 6 6 RH-A RK-A RU RS ø8 ø00 RLE ø8 KPE 6 6 ø6 ø6 SKHB-006A 7 7 ø6 KG ø86 HP ø8 SKLB-A SKL-A 7 7 ø6 ø6 SKC-A ø87 RV-A ø87 SKH-EA ø00 KP-A 7 7 ø6 SKP-A 7 7 ø8 SKH-A 7 7 WH-A ø00 ø8 Xenon Xenon Xenon PEW PES ø SKHE 6 6 ø8 6 RKE RHE 6 6 ø SKV-A ø Xenon

5 Revolving Warning Light Other RES-A ø7 KJS KJSB 8 KJ KJB 6 CLF CLB Other Signal Horn CLE ø7 CLM ø8 LAS BD 90 db at m 80 BM 90 db at m ø Signal Horn Voice Synthesizer BT 8 db at m 08 EB 9 db at m EWH EWHS EW 0 db at m PV W BV 80 db at m Signal Tower Revolving Warning Light Voice Synthesizer MV 8 db at m 70 CT 9 db at m EVB PVB 90 db at m KJPV 9 db at m 6 KJT 90 db at m Voice Synthesizer RKPV 9 db at m ø00 RKT 90 db at m ø00 EVW PVW 0 db at m RT 0 db at m 7 7 7

6 9 0 Max. panel thickness LHE-E LE-E WEP-E 90 Sensor SW 76 Sensor I/O terminal 7. Buzzer hole (B type) Approx 90 Approx 00 ASi Supported ASi Supported ASi Supported LHE-E / LE-E / WEP-E Application Example ASi power DC V power PLC ASi master Signal tower can co-exist with other devices on a single ASi cable. All other ASi models require an auxiliary power. LHE-E LE-E WEP-E Direct mount Pole mount dB at m (LE type: 8dB at m) Electronic Sound IP6 (LE type: IP) LHE-E type LE-E type WEP-E type Amber 9 6 Amber Amber Volume 6 0 Amber ASi supported Signal Tower for Open-field Network E-type: Uses ASi cable and ASi auxiliary power cable for larger systems more than A. Easy Connection: Direct connection to a linked ASi interface with ASi cable, without I/O terminals. Required Device: ASi-type controller (i.e. ASi master). Data Storage: Addresses stored in EPROM by an address input device. Lighting Pattern: Continuous only, no flashing. B type: Built-in alarm; LHE: 90dB at m (adjustable), LE: 8dB at m (adjustable), WEP: 90dB at m. Interchangeable modules*: No re-wiring even after installation, except for WEP type. -M Max. panel thickness 8 Approx 90 Approx 00 Wire entry hole Front - 0 -M 7. Approx 90 M7 P. 7 Approx 00 Approx 90 Approx 00 Side-Mount Bracket Pole hole Wire entry hole *Refer to the standard non-field bus model for details. Profile ø70 IP6 ø0 IP 7.mm IP6 ASi auxiliary power cable type LHE-E LHE-EB Sound Pattern: Short beep up to 90dB at m. Installation: Upright and indoors only. LHE-E: Add ASi power cable for more than A. ASi auxiliary power cable type Direct mount LE-EW LE-EBW Pole mount LE-EP LE-EBP Original Dual Reflection System: For enhanced light diffusion, creating bright distinctive illumination while saving energy (Patent Pending). Sound Pattern: Short beep up to 8dB at m. Installation: Upright and indoors only. ASi auxiliary power cable type WEP-E WEP-EB Clear Vertical Cut Lens: For enhanced illumination over a wide perspective. Sound Pattern: Continuous beep up to 90dB at m. Installation: Indoors only, vertical or horizontal, either direction except for alarm (B) type: alarm at the bottom. Number of stacks ( ) Lights Amber 0 0 Direction of audible alarm LHE-E LHE-EB LE-EW/LE-EP LE-EBW/LE-EBP WEP-E WEP-EB. required for Modules LHE-E / LE-E / WEP-E type ASi auxiliary power Audible alarm N/A available N/A available N/A available 0 Wire entry hole ASi power 0V (AS-i+ AS-i-) Auxiliary power V DC - 9 ASI PCB (Max.) 60mA Buzzer type required to be installed vertically with the buzzer outlet downward. Color of lead wire BROWN BLUE WHITE BLACK Current consumption Module (Max.) 0mA (,Amber) 0mA () ma (,Amber) 0mA () 0mA (,Amber) ma () ASi auxiliary power cable type AS-i+ AS-i- Auxiliary power V DC Auxiliary power 0V Audible alarm (Max.) Total current consumption of all devices ( and buzzer elements) must not exceed 00mA when operating more than three towers on the network. If the 00mA limit is exceeded, the ASi auxiliary power cable type is required. Patlite s standard signal tower for field bus application is the three-light style. 0mA 0mA 0mA

7 Max. panel thickness CC-Link PCB (Max.) 0mA Wire Color BLUE WHITE YELLOW (NONE) 7. Buzzer hole (B type) Wire entry hole Approx 90 Approx 00 Buzzer type required to be installed vertically with the buzzer outlet downward. Current consumption Element (Max.) ma (, Amber) 0mA () 0mA (, Amber) 0mA () 0mA (, Amber) ma () Remote I/O Signal DA DB DG SLD Audible alarm (Max.) 0mA 0mA 0mA CC-Link Supported CC-Link Supported CC-Link Supported 90dB at m (LE type: 8dB at m) Electronic Sound (WEP type: sound) LHE-C / LE-C / WEP-C Application Example PLC LHE-C LHE-CT CC-Link Master Remote I/O Remote I/O Remote I/O 70 Amber 9 LE-C LE-CT Direct mount 0 6 Amber IP LHE-C type LE-C type WEP-C type Window for Address Change Window for Address Change Volume PLC CC-Link Master Pole mount 0 Amber 6 LE-C type LHE-C type WEP-C type Repeater Remote I/O (T-branch) CC-Link stack light without terminating resistor can be branched using a terminal block in case a repeater is not used. WEP-C WEP-CT 0 90 Amber CC-Link supported Signal Tower for Open-field Network Single Cable: Regulates electrical power and control signals. Easy Connection: Direct connection to a linked CC-Link interface with CC-Link cable, without I/O terminals, up to 6 units. Required Device: CC-Link-type controller (i.e. CC-Link master). Data Storage: Addresses set by dip switch. Lighting Pattern: Continuous only, no flashing. B type: Built-in alarm; LHE: 90dB at m (adjustable), LE: 8dB at m (adjustable), WEP: 90dB at m, Interchangeable modules*: No re-wiring even after installation, except for WEP type. *Refer to the standard non-field bus model for details. -M Max. panel thickness 8 Approx 90 Wire entry hole 0 0 Approx Front - 0 -M 7. Approx 90 M7 P. 7 Approx 00 Approx 90 Approx 00 Side-Mount Bracket Pole hole Profile ø70 IP ø0 IP 7.mm Direct mount LHE-C WEP-C LHE-CB LE-CW WEP-CB LE-CBW Sound Pattern: Intermittent tone, up to 90dB at m. Selections: ) fast beep; ) slow beep Installation: Upright and indoors only. Pole mount LE-CP LE-CBP Original Dual Reflection System: For enhanced light diffusion, creating bright distinctive illumination while saving energy (Patent Pending). Sound Pattern: Intermittent tone, up to 8dB at m. Selections: ) fast beep; ) slow beep Installation: Indoors and upright only. Options Available: Direct or pole mount. Clear Vertical Cut Lens: For enhanced illumination over a wide perspective. Sound Pattern: Continuous up to 90dB at m. Installation: Indoors only, vertical or horizontal, either direction except for alarm (B) type: alarm exit must face downward. Number of stacks ( ) Lights Amber Direction of audible alarm. C: Without terminal resistor CT: Built-in terminal resistor LHE-C / LE-C / WEP-C type LHE-C(T) LHE-C(T)B LE-C(T)W/LE-C(T)P LE-C(T)BW/LE-C(T)BP WEP-C(T) WEP-C(T)B Audible alarm N/A available N/A available N/A available Patlite s standard signal tower for field bus application is the -light style. 0 Wire entry hole Signal Line DA, DB, DG, SLD

8 Max. panel thickness Wire Color RED WHITE (NONE) BLUE BLACK 7. Buzzer hole (B type) Wire entry hole Approx 90 Approx 00 Signal V+ (V DC) CAN- H DRAIN CAN- L V- (0V) Audible alarm (Max.) 0mA 0mA 0mA DeviceNet Supported DeviceNet Supported DeviceNet Supported 90dB at m (LE type: 8dB at m) Electronic Sound (WEP type: sound) IP LHE-D / LE-D / WEP-D LHE-D type LE-D type WEP-D type Application Example DC V power 70 PLC DeviceNet master LHE-D LE-D WEP-D Signal tower can co-exist with other devices on a single DeviceNet cable. 9 Direct mount 0 6 Volume Pole mount 0 6 SW Sensor I/O terminal LHE-D LE-D WEP-D Amber Window for Address Change Amber Window for Address Change Amber 0 Amber DeviceNet Supported Signal Tower for Open-field Network Single Cable: Uses DeviceNet cable only, which transfers power and signals for control. Easy Connection: Directly connect up to 6 linked DeviceNet units with DeviceNet cable, without I/O terminals. Required Device: DeviceNet-type controller (i.e. DeviceNet master). Data Storage: Addresses set by dip switch. Light Pattern: Continuous only, no flashing. B type: Built-in alarm; LHE: 90dB at m (adjustable), LE: 8dB at m (adjustable), WEP: 90dB at m. Sound Pattern: LHE / LE: Intermittent tone, : short beep, : long beep. WEP: alarm, continuous tone only. Interchangeable modules*: No re-wiring even after installation, except for WEP type. *Refer to the standard non-field bus model for details. -M Max. panel thickness 8 Approx 90 Wire entry hole 0 0 Approx 00-0 Direction of audible alarm. 0 Front - 0 -M 0 Wire entry hole 7. Approx 90 M7 P. 7 Approx 00 Side-Mount Bracket Pole hole Approx 90 Approx Buzzer type must be installed vertically with the buzzer outlet downward. Profile ø70 IP ø0 IP 7.mm Direct mount LHE-D WEP-D LHE-DB LE-D WEP-DB LE-DB Sound Pattern: Short beep or long beep up to 90dB at m. Installation: Upright and indoors only. Pole mount LE-DP LE-DBP Original Dual Reflection System: For enhanced light diffusion, creating bright distinctive illumination while saving energy (Patent Pending). LE-DB: Intermittent tone, up to 8dB at m. Selections: ) fast beep; ) slow beep Installation: Indoors and upright only. Options Available: Direct or pole mount. Clear Vertical Cut Lens: For enhanced illumination over a wide perspective. Sound Pattern: Continuous tone up to 90dB at m. Installation: Indoors only, vertical or horizontal, either direction except for alarm (B) type: alarm exit must face downward. LHE-D / LE-D / WEP-D type Number of stacks ( ) Lights Amber LHE-D LHE-DB LE-DW/LE-DP LE-DBW/LE-DBP WEP-D WEP-DB Audible alarm N/A available N/A available N/A available Signal Line V+ (V DC), CAN- H, DRAIN, CAN- L, V- (0V) Electric power is supplied by DeviceNet cable. Patlite s standard signal tower for field bus application is the -light style. DeviceNet PCB (Max.) 60mA Current consumption Element (Max.) 0mA (, Amber) 0mA () ma (, Amber) 0mA () 0mA (, Amber) ma ()

9 6 Blue Color R: Y: Amber G: B: Blue C: Clear/White Top to bottom ME-A / MES-A ME-A / MES-A ME-A / MES-A Signal Tower Cabtire (Special order) ø IP NPN Open collector Super slim mm Signal Tower with rust-free aluminum body, ideal for small devices. PATLITE's Exclusive Hybrid Prism-Cut Lens: For enhanced visibility from any direction and distance. Enhanced Illumination: Special high intensity illumination design. Installation: Direct mount with a single hole. Interchangeable Modules: No re-wiring even after installation. Main Body: Corrosion resistant anodized aluminum for retaining its external beauty. Lens: Superior impact and heat resistant polycarbonate resin for superior durability and light transmission. Available Colors:, Amber,, Blue, Clear/White. Body Length: MES 0mm, ME 00mm. Available by Special Order Cabtire Cable: Versatile and flexible m cable. Body Length: MEL 00mm. IP (for MES / ME / MEL). PNP compatible: ME V type. UL type (E660). Interchangeable modules Changeable color sequence: Easy to add/remove up to colored modules even after installation. Note: modules of the same color will light up simultaneously. The wiring remains the same. Each color of module corresponds to the lead wire color. MES-A Easy to add or remove If the number of module is changed, center shaft must be purchased. ME-A ME:00 (MES:0) 9 0 ø Height Lead wire length (from wire exit) ME-A: 00mm MES-A: 60mm Wiring Diagram R A Orange G B Blue C White ME-A / MES-A type Number of stacks ME-A type Height Light: 0 Lights: 70 Lights: 00 Lights: 0 Lights: 60 MES-A type Height Light: 80 Lights: 0 Lights: 0 Lights: 70 Lights: 00 A + V DC: NPN Transistor NPN Transistor ME/MES-0A-R ME/MES-0A-Y Light ME/MES-0A-G V DC Lights Lights Lights Lights ME/MES-0A-B ME/MES-0A-C ME/MES-0A-RY ME/MES-0A-RG ME/MES-0A-RB ME/MES-0A-RC ME/MES-0A-RYG ME/MES-0A-RYB ME/MES-0A-RYC ME/MES-0A-RYGB ME/MES-0A-RYGC ME/MES-0A-RYGBC R,O,G,B,C For continuous light A V DC V DC V DC V DC Max. panel thickness 0 Electrical nut (PF/) Bolt (M8) Current Capacity Withstand Current Leakage Electrical nut ø Optional mounting bracket (SZ-0) Signal line voltage and current per module ME-A/MES-A Color of Unit Color of Lead Wire Rated Signal Line Signal Line Current Amber Orange R, A: ma V DC V DC G, B, C: 0mA Blue Clear White ME/MES: positive(+) on yellow. For continuous light + V DC Consumption 0.6W 0.6W 0.W 0.W 0.W.W.W.W.W.7W.7W.7W.W.W.8W Nut Transistor Capacity ME/MES Transistor (NPN) Ic>0.A Vc>V IL<0.mA How to order ME: Standard body MES: Short body Stack ~ 0: V DC ME-0A-RYGBC

10 7 8 ø0 ø. Color of Lead Wire Orange Blue White MP/MPS Transistor (NPN/PNP) Ic>0mA Vc>V IL<0.mA Color R: Y: Amber G: B: Blue C: Clear/White Top to bottom MP / MPS MP / MPS MP / MPS Signal Tower Cabtire (Special order) ø0 IP6 NPN/PNP Open collector Patented reflection system increases visibility. High intensity Good visibility from any direction Interchangeable modules Changeable color sequence: Easy to add/remove up to colored modules even after installation. Note: modules of the same color will light up simultaneously. MPS Super slim 0mm silver body Signal Tower ideal for small devices. PATLITE's Exclusive Hybrid Prism Cut Lens: For enhanced visibility from any direction and distance. Double Insulation: For enhanced durability and safety in the work environment. Installation: Direct mount with a single hole. Interchangeable module: No re-wiring even after installation. Main Body: Superior impact and heat resistant ABS resin. Lens: Superior weather resistant and light translucent AS resin. Available Colors:, Amber,, Blue, Clear/White. Available by Special Order Cabtire Cable: Versatile and flexible m cable. All Clear Lens: Distinctive color recognition when operated (B08 type). UL type (E660). Available Colors:, Amber,, Blue, Clear/White. Easy to add or remove If the number of module is changed, center shaft must be purchased. MP MP:0 7 (MPS:) 0 ø0 Wiring Diagram MP / MPS type Height V DC: NPN / PNP Transistor NPN Transistor R, O, G, B, C Number of stacks Light Lights Lights Lights Lights A + V DC MP type Height Light: 6 Lights: 00 Lights: Lights: 70 Lights: 0 MPS type Height Light: 90 Lights: Lights: 60 Lights: 9 Lights: 0 PNP Transistor R, O, G, B, C A Max. panel thickness Bolt (M8) 0 + V DC Mounting hole ø How to order Washer Nut (M x P.mm) 7 Optional mounting bracket (SZ-0) Nut (M8) Signal line voltage and current per module MP/MPS Color of Unit Rated Signal Line Signal Line Current Amber For continuous light R A Orange R,A: 0mA V AC/DC V DC Blue G G,B,C: ma B Blue Clear C White A MP/MPS has no polarity. MP/MPS-0 MP/MPS-0 MP/MPS-0 MP/MPS-0 MP/MPS-0 Lead wire length (from wire exit) MP:,000mm MPS:,80mm For continuous light Consumption V AC/DC 0.7W V AC/DC.W V AC/DC.0W V AC/DC.6W V AC/DC.W For continuous light Stack ~ Transistor Capacity Current Capacity Withstand Current Leakage MP: Standard body MPS: Short body 0: V AC/DC MP-0-RYGBC Clear lens type: model no. with B08 The wiring remains the same. remains the same. Each color of module corresponds to the lead wire color.

11 Body color WE: Chrome plated WEP: Ivory white Stacks ~ 0: V AC/DC WEP-0FB-RYG Color R: Y: Amber G: B: Blue C: Clear/White Top to bottom Type Blank: Continuous light FB: Continuous or flashing light with audible alarm 9 0 WE / WEP WE / WEP WE / WEP Slim Wall-Mount Signal Tower Ivory White Body WEP Type Chrome Plated Body WE Type Height Height Lights: 76 Lights: 06 Lights: ø. P Lights: 0 Lights: 80 Lights: 0 P Wire Entry Hole ø 90dB at m (FB type) Electronic Sound (FB type) IP6 NPN/PNP Open collector (FB type: IP) IP6 construction is safe for installation in damp locations, dusty factories and outdoor environments. Ultra slim half-moon shaped Signal Tower offers seamless integration with most equipment. Clear Vertical Cut Lens: For enhanced illumination over a wide perspective. FB type: Built-in audible alarm with 90dB at m. Installation: Vertical and horizontal. Body Color: Chrome plated or ivory white. Lens: Superior impact and heat resistant polycarbonate resin for superior durability and light transmission. NPN/PNP Compatible: Direct connection to PLC (V DC ONLY) Lighting Pattern: Flashing and Continuous. Dust-proof and waterproof IP6 (except for FB type: IP). UL type: Available as special order (E660) Available Colors:, Amber,, Blue, Clear/White. Wiring Diagram Note: See 8 for wiring diagram WE / WEP type How to order Number of stacks Consumption Lights WE(P)-0 WE(P)-0FB V AC/DC.7W V AC/DC.7W 7. mm Super-thin design! Patlite has perfected a 7.mm-thin design that significantly enhances integration with the equipment as a built-in signal system. New and exclusive lighting design (patent pending) PAT.P Patlite has created a revolutionary lighting design (patent pending) in which multiple s project light across a broad peripheral area, ensuring equal intensity at the sides as well as the front. This design, with its side-projection technology, is a unique achievement in signal light design. Lights Lights WE(P)-0 WE(P)-0FB V AC/DC.7W V AC/DC.7W 0.6kg 0.0kg WE(P)-0 V AC/DC.0W 0.kg WE(P)-0FB V AC/DC.W 0.kg 0.kg 0.kg FB type: approx 60 flashes per minute Conventional design WE/WEP

12 LCE / LCE-U LCE / LCE-U Signal Tower Cabtire (LCE-U type only) 8dB at m (FB type) Electronic Sound (FB type) ø0 IP6 (LCE-FB type IP) NPN/PNP Open collector Reflection system High visibility from any angle Adjustable volume Max. 8dB/m Interchangeable modules Changeable color sequence: Easy to add / remove up to colored modules even after installation. Note: modules of the same color will light up simultaneously. The wiring remains the same Each color of module corresponds to the lead wire color. PATLITE s Exclusive Hybrid Prism Cut Lens: For enhanced visibility from any direction and distance. Original Dual Reflection System: For enhanced light diffusion, creating bright, distinctive illumination while saving energy (Patent Pending). Built-in s (FB Type): selectable sound patterns with adjustable volume up to 8dB at m. Installation: Direct or pole mount. Color-coordinated Wiring: Corresponds to the lens colors for quick wiring verification. Interchangeable Modules: No re-wiring even after installation. Main Body: ABS resin with superior resistance to impact and heat (U type has silver color and m cabtire cable). Lens: Superior impact resistant and light translucent AS resin. NPN/PNP Compatible: For V DC type; M type compatible with NPN only. Available Colors:, Amber,, Blue, Clear/White. High visibility from any angle. Adjustable volume Max. 8dB at m Easy to add and remove Ivory White Body LCE Type If the number of module is changed, center shaft must be purchased. Silver Color Body LCE-U Type Low-priced, high quality Signal Tower featuring low maintenance and energy savings. Dual reflection system PATLITE s original dual reflection system with its exclusive hybrid prism-cut lens and color modules create bright, distinctive, even illumination. LCE type LCE-U type ø0 * 7 ø7. Height () *M-FB type:67 Side-Mount Bracket 0 Pole hole ø Wiring Diagram Continuous only AC/DC V, R, A Orange, G, B Blue, C White wire AC/DC V, R, A Orange, G, B Blue, C White Purple Skyblue Flashing COM Brown wire wire Continuous - ø9 LCE / LCE-U type A A Flashing Continuous & alarm. Continuous and Flashing with Number of stacks Light Lights Lights Lights Lights LCE-0(U) LCE-M LCE-0(U) LCE-M LCE-0(U) LCE-M LCE-0(U) LCE-M LCE-0(U) LCE-M AC 90~0V, R, A Orange, G, B Blue, C White LCE-W type LCE-UW type ø0 Height Max. panel thickness 0 Continuous COM wire wire Ground wire and striped AC 90~0V, R, A Orange, G, B Blue, C White Purple Skyblue Continuous COM Flashing COM Brown wire wire Ground wire and striped A A V AC/DC Consumption.7W 90~0V AC.9W V AC/DC.W 90~0V AC.6W V AC/DC.0W 90~0V AC.W V AC/DC.6W 90~0V AC.8W V AC/DC.W 90~0V AC.W FB type:approx. 60 flashes per minute. LCE type LCE-U type Height Light: 8 Lights: 9 Lights: 8 Lights: 6 Lights: 98 Continuous Flashing Continuous & alarm Color of Unit Amber Blue Clear/White LCE-MFB type Height Light: Lights: 8 Lights: 8 Lights: 8 Lights: Lead wire color correspondence table All voltage types Color of Lead Wire Orange Blue White Color of Lead Wire Purple Skyblue for outer contact protection A Standard Mounting Bracket SZ-0 Optional Mounting Bracket SZ-0 Signal line voltage and current per module Signal Line Signal Line Current Signal Line Inrush Type R,Y G,B,C Current Current LCE/LCE-U V AC/DC V AC/DC 0mA ma 0mA 0mA LCE-M 90~0V AC V DC 0mA ma 0mA 0mA How to order (LCE type) LCE-0UFBW-RYGBC-Z Stacks ~ 0: V AC/DC M: 90~0V AC Body Color Blank: Ivory white U: Silver Color Type Blank: Continuous light FB: Continuous or flashing light with audible alarm Mount Blank: Pole Mount (with SZ-0) K: Pole Mount (with SZ-0) W: Direct Mount Mounting Bracket SZ-0 Color of R: Color of Lens Y: Amber G: Blank: Colored lens B: Blue Z: Clear lens C: Clear/White Top to bottom Audible alarm -0 - ø ø0 Wire entry hole ø LCE / LCE-U

13 LCS-K ø0 0.kg 0.7kg 0.60kg Easy to add or remove If the number of module is changed, center shaft must be purchased. 8 ø7. Height (0.) Clear lens style tower is also available. OFF ON Mount 0: V AC/DC Blank: Pole Mount (with SZ-0) K: Pole Mount (with SZ-0) LCS type Mounting Bracket SZ-0 LCS-K type Mounting Bracket SZ-0 Color of Lens Blank: Colored lens Z: Clear lens LCS / LCS-U LCS / LCS-U Signal Tower ø0 IP Ivory White Body LCS Type Silver Color Body LCS-U Type Interchangeable modules Changeable color sequence: Easy to add/ remove up to colored modules even after installation. Note: modules of the same color within a signal tower will light up simultaneously. The wiringremains the same. Each color of module corresponds to the lead wire color. LCS type ø0 Height LCS-K type Height Light: 6 Lights: 96 Lights: Lights: 66 Lights: 0 NPN/PNP Open collector 8 ø7. (7) Reflection system High visibility from any angle Versatile Signal Tower featuring high quality and low price. PATLITE s Exclusive Hybrid Prism Cut Lens: For enhanced visibility from any direction and distance. Original Dual Reflection System: For enhanced light diffusion, creating bright, distinctive illumination while saving energy (Patent Pending). Installation: Pole mount only. Color coordinated Wiring: Corresponds to the lens colors for quick wiring verification. Interchangeable Modules: No re-wiring even after installation. Main Body: ABS resin with superior resistance to impact and heat. Lens: Superior impact resistant and light translucent AS resin. Available Colors:, Amber,, Blue, Clear/White. Approx. 0 from wire exit Wiring Diagram Note: See for wiring diagram LCS type 7. Side-Mount Bracket Pole Hole ø ø9 0. Please add Z at the end of the part number when ordering the clear lens type tower. Available by Special Order Silver Color Body Type (LCS-U). Cabtire Cable: Versatile and flexible m cable. Clear Lens Module: Distinctive color recognition when operated (B08 type). UL type (E660). How to order(lcs type) Number of stacks Consumption LCS Light LCS-0 V AC/DC 0.7W 0.kg Lights LCS-0 V AC/DC.W 0.kg Lights LCS-0 V AC/DC.0W 0.8kg Lights LCS-0 V AC/DC.6W 0.kg Lights LCS-0 V AC/DC.W 0.kg LCS-0K- RYGBC-Z Stacks ~ Color of R: Y: Amber G: B: Blue C: Clear/White Top to bottom

14 .W Standard Mounting Bracket SZ-0 LES-A type Height Light: 7. Lights: 0. Lights:.6 Lights: 6.8 Lights: 9.0 M7 P. Max. panel thickness 8 Vinyl tube Side-Mount Bracket Pole hole ø ø7. ø0 Optional Mounting Bracket SZ-0 - ø9 0. Height (87) LES-AW type Max. panel thickness 0 Mounting screw (M) Vinyl tube ø8 Wire exit Optional Mounting Bracket SZ-0 Color Designator Chart * Color of unit Color of Lead wire Amber Orange Blue Blue Clear/White White *LE type: All light wires are supplied even if all colors are not used. Color of Lead wire Purple Skyblue * wires do not exist for continuous only models. for customer-supplied contact protection All voltage types A Height Light: 7. Lights: 0. Lights:.6 Lights: 6.8 Lights: 9.0 How to order 0 0 ø0 Height - ø (M Through hole) Optional Mounting Bracket SZ-0 Signal line voltage and current per module Signal Line Signal Line Current LE V AC/DC V AC/DC R, A: 0mA G, C: 0mA B: ma Signal Line Current LES/LE V AC/DC V AC/DC R, A: ma G, C: 0mA B: ma 0mA LE 00V,0V AC V DC R, A: ma G, C: 0mA B: ma Inrush Current 0mA Stacks ~ LE-0FBW-RYGBC LE / LES LE / LES LE / LES Signal Tower LES-A LE LE type ø7. ø0 Height M7 P. 00/0V AC type Height Light: 0.8 Lights:.0 Lights: 6. Lights: 9. Lights:.6 /V AC/DC type Height Light:.0 Lights: 6. Lights: 9. Lights:.6 Lights:.8 Baffle Max. panel thicknes -M LE-FB type ø0 Height Side-Mount Bracket Pole hole ø Audible alarm. 0 - ø ø ø0 Wire entry hole ø 8dB at m (LE-FB type) ø0 IP (Pole-mount type IP) NPN/PNP Open collector Wiring Diagram LE /V AC/DC (LES: V type only) LE 00/0V AC For continuous light, R, R, A Orange, A Orange, G, G, B Blue, B Blue, C White, C White () A For continuous light A Reflection system High visibility from any direction Versatile, cost and energy efficient Signal Tower for every need. PATLITE s Exclusive Hybrid Prism Cut Lens: For enhanced visibility from any direction and distance. Original Dual Reflection System: For enhanced light diffusion, creating bright distinctive illumination while saving energy (Patent Pending). Built-in s (FB Type): selectable sound patterns with adjustable volume up to 8dB at m. Installation: Direct or pole mount Color-coordinated Wiring: Corresponds to the lens colors for quick wiring verification. Interchangeable Modules: No re-wiring even after installation. The module of LES-A cannot be added, removed or interchanged. Main Body: ABS resin with superior resistance to impact and heat. Lens: Superior impact resistant and light translucent AS resin. NPN/PNP Compatible: Except LE 00/0V AC, compatible with NPN only. Available Colors:, Amber,, Blue, Clear. Available by Special Order LES V: IP6 for direct mount and IP for pole mount types. UL type (E660). LE-FB /V AC/DC, R, A Orange, G, B Blue, C White Purple Skyblue Flashing COM Brown () LE type A Continuous Flashing LE-FB 00/0V AC, R, A Orange, G, B Blue, C White Purple Skyblue Flashing COM Brown Continuous COM A Continuous Flashing Number of stacks Consumption LE-0 V AC/DC.W LE-0 V AC/DC.6W Light LE-0 00V AC.7W LE-0 0V AC LE-0 V AC/DC.7W LE-0 V AC/DC.W Lights LE-0 00V AC 6.7W LE-0 0V AC LE-0 V AC/DC 0: V AC/DC 0: V AC/DC 0: 00V AC 0: 0V AC Lights LE-0 LE-0 V AC/DC.7W 00V AC Color R: Y: Amber G: B: Blue C: Clear/White Top to bottom Interchangeable modules Changeable color sequence: Easy to add / remove up to colored modules even after installation. Note: modules of the same color will light up simultaneously. The wiring remains the same Each color of module corresponds to the lead wire color. Easy to add and remove If the number of module is changed, center shaft must be purchased. Note: The module of LES-A cannot be added, removed or interchanged. Dual reflection system PATLITE s original double reflection system with its exclusive hybrid prism-cut lens and color modules create distinctive illumination that is bright and even (Patent Pending). Lights Lights LES type LE-0 LE-0 LE-0 LE-0 LE-0 LE-0 LE-0 LE-0 LE-0 0V AC V AC/DC V AC/DC 00V AC 0V AC V AC/DC Number of stacks Consumption Light V AC/DC 0.6W LES-0A Lights.W LES-0A V AC/DC Lights V AC/DC LES-0A.7W Lights LES-0A.W V AC/DC Lights V AC/DC LES-0A.7W.7W.W 8.W V AC/DC.7W 00V AC 0V AC 7.W.W 9.W FB type:approx. 60 flashes per minute. Type Blank: Continuous light FB: Continuous or flashing light with audible alarm Stacks ~ 0: V AC/DC LES-0AW-RYGBC Mount Blank: Pole Mount (with SZ-0) W: Direct Mount Mount P: Pole Mount (with SZ-0) W: Direct Mount 6 Color R: Y: Amber G: B: Blue C: Clear/White Top to bottom

15 POLE- S POLE- A SZ-00 SZ-06A SZ-70-B SZ-00 ADC Aluminum alloy die-cast Wiring Diagram No. unit No. Orange unit Amber No. unit No. Blue unit Blue No. White unit Clear/White No.6 No.7 No.8 COM No.9 Flashing COM No.0 for flashing <Recommended electric wire> Solid wire : 0.8-.mm Stranded wire : 0.-.mm (AWG -8) Steel Pole 00mm Aluminum Pole 800mm.7mm 00mm.7mm 00mm.7mm 800mm : POLE-800A 00mm : POLE-00A 00mm : POLE-00A 7 8 ø68 LU-0FB V DC Modules Material Steel Aluminum ADC ADC ABS resin ABS resin A For continuous light and buzzer For flashing LU LU Signal Tower 8dB at m (FB type) Electronic Sound (FB type) ø0 IP6 NPN/PNP Open collector Module Base Module Terminal block -M.6 Height Optional parts Upper Bracket SZ-60-U LU type Height Light: Lights: Lights: 9 Lights: Lights: 7 - Front (Buzzer) 0 Wire entry Max. panel thickness 0 template Mounting Bracket SZ-00 (For ø.7mm pole) 0. SZ-06A (For ø.7mm pole) Versatile modular Signal Tower featuring easy assembly and wiring designed for every need. PATLITE s Exclusive Hybrid Prism Cut Lens: For enhanced visibility from any direction and distance. Built-in s (FB Type): selectable sound patterns up to 8dB at m. Installation: Direct or pole* mount. Color-coordinated Wiring: Terminal block color corresponds to the lens colors for quick wiring verification. Interchangeable Modules: No re-wiring even after installation. Lens: Superior impact and heat resistant polycarbonate resin for superior durability and light transmission. Available Colors:, Amber,, Blue, Clear/White. Required for pole mounting Pole bottom line ø00± ø7 - ø ø 800mm.7mm 00mm.7mm.7mm 800mm : POLE-800S 00mm : POLE-00S 00mm : POLE-00S Available By Special Order RoHS Compliance. Silver Color Body. Modules of the same color can be modified to operate from different terminals. * Optional part sold separately. How to order module LU-E-R unit Base module Color R: Y: Amber G: 0: V DC B: Blue C: Clear/White LU-0FB Type Blank: Continuous light FB: Continuous or, flashing light with audible alarm Wall Mount Bracket SZ-00 For.7mm pole 7 7 Mounting module Base module Module Color RED AMBER GREEN BLUE CLEAR LU-E-R LU-E-Y LU-E-G LU-E-B LU-E-C Rated voltage V DC Operating voltage Rated voltage ± 0% (.6~6.V) Current/ ma/.w ma/.0w Operating temperature range -0 C~+60 C g ±0% Options LU-0 Continuous only LU-0FB sounds / Flash Rated V DC Operating voltage Rated voltage ± 0% (.6~6.V) Operating temperature range -0 C~+60 C Open Collector 8g ±0% PNP/NPN 00g ±0% FB type: approx. 60± flashes per minute

16 Wire exit ø -ø How to order SEFBW-0D-R Blank: Continuous light FB: Continuous or flashing light with audible alarm 9 0 Blank: Pole mount (with SZ-0) W: Direct mount Stacks ~ 0: V AC/DC 0: 00V AC 0: 0V AC 6 Color R: Y: Amber G: B: Blue C: Clear/White Top to bottom SE-D SE-D SE-D Signal Tower 8dB at m (FB type) Electronic Sound (FB type) ø7 IP ( ) FB type: IP Pole mount: IP SEB(W), SEFB(W) type Height Light: 7.7 Lights:.8 Lights: 8.9 Lights: 9.0 Lights: 6. SE(W), SEF(W) type Height Light: 7. Lights:. Lights: 09. Lights: 76. Lights:. Max. panel thickness: 0mm Pole mount ø7 Wiring Diagram Height (7) Direct mount (W type) Max. panel thickness: mm -M ø7 Height NPN/PNP Open collector Note: See 7 for wiring diagram Signal Tower featuring enhanced visibility with original reflection system. PATLITE's Exclusive Hybrid Prism Cut Lens: For enhanced visibility from any direction and distance. Original reflection system: Improves brightness and provides maintenance free operation. FB type: tone built-in buzzer with volume control (8dB at m). Installation: Direct or pole mount. Color-coordinated wiring: Corresponds to the lens color for quick wiring verification. Interchangeable module: No re-wiring even after installation. Lens: Weather resistant and light translucent AS resin. NPN/PNP compatible: Except 00/0V AC, compatible with NPN only. CE Compliance: V AC/DC type ONLY. Available Colors:, Amber,, Blue, Clear/White. Available by Special Order UL type (E660). RoHS compliance. SE-D type Number of stacks Consumption Light Lights Lights Lights Lights SE-0D SE-0D SE-0D SE-0D SE-0D SE-0D SE-0D SE-0D SE-0D SE-0D SE-0D SE-0D SE-0D SE-0D SE-0D V AC/DC 00V AC 0V AC V AC/DC 00V AC 0V AC V AC/DC 00V AC 0V AC V AC/DC 00V AC 0V AC V AC/DC 00V AC 0V AC.W.0W.W.W.0W.W.W 6.W 7.0W.W 7.W 8.W.W 8.W 0.0W

17 Front - ø ø0 Wire exit ø STD type Circular mounting bracket Optional Mounting Bracket SZ-00 STD STD STD Signal Tower 7 Height Light: 60 Lights: 6 Lights: 9 Lights: 8 Height ~7 (optional) ø7 IP0 Vibration-absorption technology to extend bulb life. Extended Life: Shock resistance bulb and vibration-absorption mechanism provides long bulb life even under severe vibration. Installation: Pole mount. Lens: Superior impact and heat resistant polycarbonate resin for superior durability and light transmission. CE Compliance: For V AC/DC type ONLY. Available Colors:, Amber,, Blue, Clear/White. Optional Parts Illuminant DE Light diffusion through hybrid prism-cut lens. E Base illuminant bulb will eliminate bulb failure. Enhanced Visibility: PATLITE's exclusive hybrid prism-cut lens with super bright s Energy Efficient: -saving and long life. Installation: Same as bulb type. AC/DC compatible. Available Colors:, Amber,, Blue, Clear/White. Dimension Base E ø7.7 mm MODEL DE-E Visible from Top Even optical diffusion with the combination of PATLITE's hybrid prism-cut lens and radial layout. Amber Blue Clear/White BASE RATED VOLTAGE WATTAGE E V AC/DC 0.7W Edison Base Only V model is applicable on all series. 60 Wiring Diagram STD (Continuous lighting type) Type V AC/DC 00~0V AC STD type Number of stacks Light Lights Lights Lights ( wire) (Orange wire) ( wire) (Blue wire) Common wire ( wire) For continuous light Amperage rating for the fuse STD-0 STD-0 STD- STD- STD-0 STD-0 STD- STD- STD-0 STD-0 STD- STD-0 STD-0 STD- STD- :0V/0V/0V/0V: T0 E Amperage rating A A ) STD-F V type V AC/DC 00V AC 0V AC 0V AC V AC/DC 00V AC 0V AC 0V AC V AC/DC 00V AC 0V AC V AC/DC 00V AC 0V AC 0V AC ( wire) (Orange wire) ( wire) (Blue wire) Common wire for flashing (Brown wire) source wire ( wire) source wire ( wire) 0A 0V 0W 0V W 0V 0W 0V W 0V 0W 0V W 0V 0W 0V W 0V 0W 0V W STD- 0V AC 0V 0W Vibration-absorption mechanism extends bulb life. 0V W 0V 0W 0V W 0V 0W 0V W Without vibration-proof The unique vibration absorbing structure using new material reduces vibration and impact from all machines and devices, greatly extending bulb life (PAT.) For continuous light For flashing ) STD type STD-F 00V/0V/00~0V type ( wire) (Orange wire) ( wire) (Blue wire) Common wire for flashing (Brown wire) Common wire for continuous lighting ( wire) source wire ( wire) source wire ( wire) How to order Stack ~ 0: V AC/DC 0: 00V AC : 0V AC : 0V AC The rubber vibration isolator absorbs vibration. For continuous light For flashing A STD-0F-RYG ) Color R: Y: Amber G: B: Blue C: Clear/White Top to bottom Type Blank: Continuous light F: Continuous light or flashing light

18 -M V AC/DC: 00* 00/0V AC: 00* 00/0V AC type Height Light: 06.0 Lights: 7. Lights: 88. Lights: 9.6 Lights: 70.8 V AC/DC type Height Light: 0.0 Lights: 9. Lights:. Lights: 7.6 Lights:.8 Dual reflection system PATLITE s original dual reflection system with its exclusive hybrid prism-cut lens and color modules create bright, distinctive, even illumination. Color of R: Y: Amber G: B: Blue C: Clear/White Top to bottom standard Circular mounting bracket LME-UL/LME-UFBL LME-L/LME-FBL type Mounting Bracket SZ-0 Optional Mounting Bracket SZ-08 Color of Lens Blank: Colored lens Z: Clear lens LME / LME-U LME / LME-U LME / LME-U Signal Tower Cabtire (LME-U) 90dB at m (FB type) Electronic Sound (FB type) ø60 IP6 (FB,L,K type: IP) Ivory White Body LME Type Silver Color Body LME-U Type Interchangeable modules Changeable color sequence: Easy to add / remove up to colored modules even after installation. Note: modules of the same color within a signal tower will light up simultaneously. The wiring remains the same Each color of module corresponds to the lead wire color. LME type ø60. Height LME-L type ø.7 7 (60.) Easy to add and remove If the number of module is changed, center shaft must be purchased. LME-W type ø60 Height NPN/PNP Open collector 00±0* Baffle Max. thickness 7 Reflection system High visibility from any direction Adjustable volume Max. 90dB at m Versatile, cost and energy efficient Signal Tower for every need. PATLITE's Exclusive Hybrid Prism Cut Lens: For enhanced visibility from any direction and distance. Original Dual Reflection System: For enhanced light diffusion, creating bright distinctive illumination while saving energy (Patent Pending). FB type: selectable built-in alarms with adjustable volume up to 90dB at m. Installation: Direct or pole mount. Interchangeable module: No re-wiring even after installation. Main Body: Superior impact and heat resistant ABS resin. Lens: Superior weather resistant and light translucent AS resin. NPN/PNP Compatible: Except 00/0V AC LME-U type, compatible with NPN only. Available Colors:, Amber,, Blue, Clear/White. LME-U type Available V AC/DC only. Silver Color Body. Cabtire Cable: Versatile and flexible m cable. Pole-mount with circular mounting base or wall mount bracket as an optional accessory. Available by Special Order UL type (E660) ø.7 00* 00 Wiring Diagram LME type Number of stacks ø Consumption LME LME-0 V AC/DC.W 0.kg Light LME-0 00V AC.W 0.66kg LME-0 0V AC LME-0 V AC/DC.W 0.8kg Lights LME-0 00V AC 7.W 0.7kg LME-0 0V AC LME-0 V AC/DC.8W 0.kg Lights LME-0 00V AC 7.9W 0.78kg LME-0 0V AC LME-0 V AC/DC.W 0.60kg Lights LME-0 00V AC 8.7W 0.8kg LME-0 0V AC LME-0 V AC/DC.6W 0.66kg Lights LME-0 00V AC 9.W 0.90kg LME-0 0V AC LME-L 0.77kg.0kg 0.8kg.06kg 0.87kg.kg M. - ø LME-W 0.8kg 0.kg 0.kg 0.8kg 0.0kg 0.6kg 0.6kg 0.70kg 0.kg 0.76kg FB type:approx. 60 flashes per minute. *LME-U: 000 Note: See for wiring diagram 8 How to order LME-0UFBW-RYGBC-Z Stack ~ 0: V AC/DC 0: 00V AC 0: 0V AC Body Color Blank: lvory white U: Silver color Type Blank: Continuous light FB: Continuous or flashing light with audible alarm Mount Blank: Pole Mount (with circular mounting bracket) K: Pole Mount (with SZ-00) L: Pole Mount (with SZ-0) W: Direct Mount

19 0 ø0 How to order Clear lens Patlite's new single-tier, multi-color unit is ideally suited for installations requiring a multiple color display but have limited vertical space. Clear lenses distinguish between lit and unlit lamps, and the unlit set integrates visually with the equipment to which it is attached. Wire exit ø LME-0UFBW-S 6 Mount Standard Circular mounting bracket Optional Mounting Bracket SZ-00 Optional Mounting Bracket SZ-0 Optional Mounting Bracket SZ-08 LME-S / LME-Q LME-S / LME-Q LME-S / LME-Q Signal Tower Cabtire 90dB at m (FB type) Electronic Sound (FB type) ø60 IP6 NPN Open collector Patlite's new single tier, triple color or quadruple color unit S:, Amber, Q:, Amber,, Blue S:,, Blue Q:, Amber,, Clear/White S7: Amber,, Blue Q: Amber,, Blue, Clear/White LME type ø (V DC type: 0.0) 7 LME-W type Baffle Max. panel thickness -M ø (V DC type: 0.0) 00 (LME-W) 6~7 0 - ø Reflection system High visibility from any angle Adjustable volume Max. 90dB at m Versatile, cost and energy efficient Signal Tower for every need. PATLITE's Exclusive Hybrid Prism-Cut Lens: For enhanced visibility from any direction and distance. Original Dual Reflection System: For enhanced light diffusion, creating bright, distinctive illumination while saving energy (Patent Pending). FB type: selectable built-in alarms with adjustable volume up to 90dB at m. Installation: Direct or pole mount. Interchangeable Modules: No re-wiring even after installation. Patlite's new single tier, triple or quadruple color unit: For multi color display applications with limited vertical space. Pole-mount type: Includes circular mounting base as standard equipment. Available Colors: Refer to color combination table (p. 6). Available by Special Order PNP compatible. Silver color body. UL compliance. ø Wiring Diagram LME-S / LME-Q type LME-S type Number of stacks Light LME-0S LME-0S 00V AC 0V AC Consumption Note: See for wiring diagram LME LME-0S V DC.W 0.kg.W 0.66kg LME-W 0.8kg 0.kg FB type:approx. 60 flashes per minute. LME-Q type Number of stacks Light LME-0Q LME-0Q 00V AC 0V AC Consumption LME LME-0Q V DC.W 0.kg.W 0.66kg LME-W 0.8kg 0.kg FB type: approx. 60 flashes per minute. 0: V DC 0: 00V AC 0: 0V AC Body color Blank: Ivory white U: Silver color Dual reflection system PATLITE s original dual reflection system with its exclusive hybrid prism-cut lens and color modules create bright, distinctive, even illumination. Type Blank: Continuous light FB: Continuous or flashing light with audible alarm Blank: Pole Mount (with circular mounting bracket) W: Direct Mount Color S:, Amber, S:,, Blue S7: Amber,, Blue Q:, Amber,, Blue Q:, Amber,, Clear/White Q: Amber,, Blue, Clear/White

20 (LMS) (LMS-K) Standard Mounting Bracket LMS-K type Mounting Bracket SZ-00 LMS-L type Mounting Bracket SZ-0 All clear lens type is also available. OFF Please add - Z after the part number when you place the order for all clear lens type. 7 8 (0) (0) 66 ø M 6~7 ø0 0 - ø ø 8 - ø 0 ø0 Wire exit ø Color of R: Y: Amber G: B: Blue C: Clear/White Top to bottom Color of Lens Blank: Colored lens Z: Clear lens ON LMS / LMS-U LMS / LMS-U LMS / LMS-U Signal Tower ø60 IP6 NPN/PNP Open collector Ivory White Body LMS Type Silver Color Body LMS-U Type LMS LMS type Height Light: 69. Lights: 0. Lights:.6 Lights: 9.8 Lights:.0 ø.7 ø60 00±0 LMS-K 7 Height (9) ø60 7 ø.7 LMS-L ø.7 M P. (0~6) 8 68 (6) 7. Reflection system High visibility from any direction Versatile, cost and energy efficient Signal Tower for every need. PATLITE's Exclusive Hybrid Prism Cut Lens: For enhanced visibility from any direction and distance. Original Dual Reflection System: For enhanced light diffusion, creating bright distinctive illumination while saving energy (Patent Pending). Installation: Pole mount. Interchangeable Modules: No re-wiring even after installation. Main Body: Superior impact and heat resistant ABS resin. Lens: Superior weather resistant and light translucent AS resin. Available Colors:, Amber,, Blue, Clear/White. Available by Special Order Silver Color Type (LMS-U). Cabtire Cable: Versatile and flexible m cable. UL type (E660). Wiring Diagram LMS type Note: See for wiring diagram How to order Number of stacks Consumption LMS LMS-L LMS-K Light LMS-0 V AC/DC.W 0.9kg 0.6kg Lights LMS-0 V AC/DC.W 0.kg 0.67kg Interchangeable modules Easy to add or remove Lights Lights LMS-0 V AC/DC.8W LMS-0 V AC/DC.W 0.9kg 0.kg 0.7kg 0.7kg Changeable color sequence: Easy to add/ remove up to colored modules even after installation. Note: modules of the same color within a signal tower will light up simultaneously. If the number of module is changed, center shaft must be purchased. Lights LMS-0 V AC/DC.6W 0.9kg 0.8kg 0.kg 0.7kg 0.kg 0.7kg 0.6kg LMS-0UL-RYGBC-Z Stack ~ 0: V AC/DC Body Color Blank: Ivory white U: Silver color Mount The wiring remains the same. Each color of module corresponds to the lead wire color. Blank: Pole Mount (with circular mounting bracket) K: Pole Mount (with SZ-00) L: Pole Mount (with SZ-0)

21 LHE type Height Light: Lights: Lights: 9 Lights: Lights: 76 Optional parts How to order Optional Wall mount Bracket SZ-08 LHE LHE LHE Signal Tower ø70 Height Wire exit ø ø ø Optional Mounting Pole SZ-0L Optional Mounting Pole SZ-0T 90dB at m (FB type) Electronic Sound (FB type) ø70 IP6 (FB type IP) -M Max. panel thickness 0 ''Super Bright'' provides highest level of visibility. RED Buzzer AMBER GREEN BLUE CLEAR/WHITE NPN/PNP Open collector Wiring Diagram Signal Tower with waterproof design for wet environments. Reflection system Adjustable volume Max. 90dB at m Original reflection system: Improves brightness and provides maintenance free operation. FB type: built-in alarms with adjustable volume up to 90dB at m. Installation: Direct mount; pole mount is available with optional mounting pole. Interchangeable Modules: No re-wiring even after installation. Lens: Superior impact and heat resistant AS resin for superior durability and light transmission. Available Colors:, Amber,, Blue, Clear/White. Available by Special Order UL type (E660). LHE type Note: See for wiring diagram Interchangeable modules Changeable color sequence: Easy to add / remove up to colored modules even after installation. Note: modules of the same color within a signal tower will light up simultaneously. The wiring remains the same Each color of module corresponds to the lead wire color. Easy to add and remove If the number of module is changed, center shaft must be purchased. Dual reflection system PATLITE s original dual reflection system with its exclusive hybrid prism-cut lens and color modules create bright, distinctive, even illumination. Number of stacks Light Lights Lights Lights Lights LHE-0A/AFB LHE-0A/AFB LHE-0A/AFB LHE-0A/AFB LHE-0A/AFB LHE-0A/AFB LHE-0A/AFB LHE-0A/AFB LHE-0A/AFB LHE-0A/AFB LHE-0A/AFB LHE-0A/AFB LHE-0A/AFB LHE-0A/AFB LHE-0A/AFB V AC/DC 00V AC 0V AC V AC/DC 00V AC 0V AC V AC/DC 00V AC 0V AC V AC/DC 00V AC 0V AC V AC/DC 00V AC 0V AC Consumption.W.7W.7W.W 6.W 6.W.W 7.9W 7.9W.W 9.W 9.W 6.W 0.9W 0.9W FB type approx. 60 flashes per minute. Stack ~ LHE-0AFB-RYGBC 0: V AC/DC 0: AC 00V 0: AC 0V Color R: Y: Amber G: B: Blue C: Clear/White Top to bottom Type Blank: Continuous light FB: Continuous or flashing light with audible alarm 9 0

22 Wiring Diagram No. unit No. Orange unit Amber No. unit No. Blue unit Blue No. White unit Clear/White No.6 No.7 No.8 COM No.9 Flashing COM No.0 for flashing <Recommended electric wire> Solid wire : 0.8-.mm Stranded wire : 0.-.mm (AWG -8) -M 60 6 Aluminum Pole Max.mounting hole size (? 0) A Easy wiring terminal system SZ-0T 8 ø70 ø70 Pole bottom line 66 R0 ø. For continuous light and alarm For flashing ø00± ø7 Ground screw M Hexagon nut - ø 8 LU7 LU7 LU7 Signal Tower 90dB at m (FB type) Electronic Sound (FB type) ø70 Base Module Module Terminal block -M ø70.. Height LU7 type Optional Parts Height Light: Lights: Lights: 9 Lights: Lights: 7 Max. panel thickness 0 Wire exit ø ø ø IP6 NPN/PNP Open collector Upper Bracket SZ-0-U Mounting Bracket SZ-06A (For.7mm pole Steel Pole Versatile modular Signal Tower featuring easy assembly and wiring designed for every need. PATLITE's Exclusive Hybrid Prism Cut Lens: For enhanced visibility from any direction and distance. FB type: selectable built-in alarms with adjustable volume up to 90dB at m. Installation: Direct mount (Pole mount with optional parts). Color-coordinated Terminal Block: Corresponds to the lens colors for quick wiring verification in the base unit. Interchangeable module: No re-wiring even after installation. Lens: Superior impact and heat resistant polycarbonate resin for superior durability and light transmission. Available Colors:, Amber,, Blue, Clear/White. Available by Special Order RoHS Compliance. Silver Color Body. Required for pole mounting - ø. 0 ø70 ø8 SZ-08 ø0 -M 0 (unit: mm) (unit: mm) 800mm.7mm Wall Mount Bracket SZ-00 (For.7mm pole 00mm.7mm 00mm.7mm 800mm : POLE-800S 00mm : POLE-00S 00mm : POLE-00S 800mm.7mm SZ-07 (For.7mm pole 00mm.7mm 00mm.7mm 800mm : POLE-800A 00mm : POLE-00A 00mm : POLE-00A SZ-0L 70 Mounting -? module Base module 70? ?0 LU7-E-R LU7-E-Y LU7-E-G LU7-E-B LU7-E-C Color Amber Blue Clear/White LU7-0 LU7-0FB LU7-M V DC V DC 90~0V AC / Flash LU7-MFB 90~0V AC sounds / Flash FB type: approx. 60 flashes per minute. - sounds / Flash - Modules Material SZ-0-U ADC POLE- S Steel POLE- A Aluminum SZ-06A ADC SZ-00 ABS resin SZ-0L ADC Steel SPHC EPT ADC Aluminum alloy die-cast SPHC Hot rolled milled (sheet) steel EPT Ethylene propylen rubber? SZ-70-B SZ Modules Material ABS resin ADC ?. Pre-assembled Material Upper Mounting Pole L Bracket Bushing Bracket Bracket SZ-0T ADC Steel ADC 80 M (unit: mm)

23 Color Consumption Amber Blue Clear/White GREEN BLUE CLEAR LU7-XE-R LU7-XE-Y LU7-XE-G LU7-XE-B LU7-XE-C LU7-XE Strobe Module LU7-E V DC V DC V DC V DC V DC 000 LU7-E 600 LU7-E LU7-E LU7-XE(peak) LU7-XE(peak) 000 LU7-XE(peak) 00 LU7-XE(peak) 000 LU7-E 000 LU7-XE(peak) ø70 IP6 NPN/PNP Open collector Comparative Brightness x. 90mA 90mA 0mA 70mA 80mA x8.0 x.0 x x kg 0.07kg 0.07kg 0.07kg 0.07kg [mcd] LU7-XE LU7-V LU7-V Sound Module 80dB at m ø70 IP6 NPN/PNP Open collector Stackable sound module with high volume in all directions. Volume () : Adjustable with internal control, high level of 80dB at m in all direction. Playback System () : High quality MP, alarms, melodies or up to messages in seconds. Operating Terminal / Playback Sound: Selected by internal jumper placement. CE compliant. UL approved. () Sound level may vary depending on type of sound. () Sound data is pre-recorded per order at the factory. Stackable audible alarm Available for all LU7 base styles. Easily mounts on top of the light stack. LU7-V Stackable strobe module saves energy and requires low maintenance. Application () : For use with the LU7 series signal tower. Lighting Pattern: Double-flash for a visually stunning display. : Super bright for enhanced visibility. Assembly: Stackable and interchangeable before or after installation. () For use with the LU7-0 and LU7-0FB bases only. RED YELLOW Selectable playback sound The jumper position determines the sound. LU7-V type LU7-XE type ø70 Consumption ø70 LU7-V V DC.W 0.7kg MP ( Messages) Head cover is supplied with the base unit.

24 ø Wire exit ø When installing, please keep the buzzer hole faced downward. Signal line voltage and current per module WME-A Type V AC/DC How to order Stack ~ 8 Signal Line V AC/DC 90~0V AC V DC 8. ( Lights) ( Lights) 66 ( Lights) 07 ( Lights) Signal Line Current R A G B C ma 0mA WM-0FB-RYGB 0: V AC/DC 0: 00V AC : ~0V AC 0: 00~0V AC Stack ~ Signal Line Current 0mA Color R: Y: Amber G: B: Blue C: Clear/White Top to bottom Type Blank: Continuous light FB: Continuous or flashing light with audible alarm WME-0AFB-RYGB 0: V AC/DC M: 90~0V AC Color R: Y: Amber G: B: Blue C: Clear/White Top to bottom Inrush Current 0mA WM / WME-A WM / WME-A WM / WME-A Signal Tower (WME-A) (WME-A) (WM) 90dB at m (WME-A) (WM type: 80dB at m) Electronic Sound (WME-AFB) (WM type: sound) W70 D80 IP6 (FB type: IP) NPN/PNP Open collector Exclusive wall-mount design saves space and enhances its integral appearance. FB type: Built-in audible alarm up to 90dB at m (WM-FB type: 80dB at m). Extended Life: Shock resistant bulb strong even under severe vibration (WM type). Installation: Easy vertical and horizontal installation with mounting bracket. Interchangeable Modules: No re-wiring even after installation. Mount option: Compatible with household switch box (JISC 86 with 8.m pitch). Main body: Made of ABS resin (WME-A). Lens: Superior impact and heat resistant polycarbonate resin for superior durability and light transmission. NPN/PNP Compatible: V DC type ONLY. Available Colors:, Amber,, Blue, Clear/White. Available by Special Order UL type (E660). WME-A stack type. Interchangeable Modules (WME-A type) If the number of module is changed, center shaft and mounting bracket must be purchased. Buzzer hole (FB type) 70 Wiring Diagram WME-A Continuous light V AC/DC Amber Orange Blue Blue Clear White Purple Skyblue Flashing COM Brown Continuous Continuous A Continuous or flashing light with audible alarm V AC/DC Continuous Amber Orange Blue Blue Clear White Flashing A Supply WM / WME-A type WM-0 WM-0 V AC/DC 00V AC Height 90~0V AC 90~0V AC Number of stacks No. Lights WM-0 WM-0 WM- V AC/DC 00V AC ~0V AC 8V W 0V W 0V W WME-0A WME-MA Lights WM-0 WM-0 WM-0 00~0V AC V AC/DC 00V AC 0V W 8V W 0V W 9 0 WME-0A WM- ~0V AC 0V W 9 WME-MA WM-0 00~0V AC 0V W WM-0 V AC/DC 8V W 9 WME-0A Lights WM-0 00V AC 0V W 0 WM- ~0V AC 0V W 9 WME-MA WM-0 00~0V AC 0V W Lights WM type: T0 BAD 8V W 9 0V W 0 WM- ~0V AC 0V W 9 WM-0 00~0V AC 0V W WME-0A WME-MA Height Lights: 7 Lights: 88 Lights: 9 Lights: Amber Orange Blue Blue Clear White Amber Orange Blue Blue Clear White Purple Skyblue Flashing COM Brown Continuous COM V AC/DC 90~0V AC V AC/DC 90~0V AC V AC/DC 90~0V AC V AC/DC 90~0V AC Continuous A Continuous Flashing A Consumption.W.W (at 00V).8W 6.6W (at 00V).8W 8.6W (at 00V).8W 0.6W (at 00V) FB type approx. 60 flashes per minute. : Custom order Supply Note: When the same colored of modules are in one light tower, they will light simultaneously. Individual module control is possible by special order. Type Blank: Continuous light FB: Continuous or flashing light with audible alarm 6

25 Wire exit ø 6 Front 0 Stack ~ 0: V AC/DC 0: 00V AC 0: 0V AC Optional Mounting Bracket SZ-007 Optional Mounting Bracket SZ-008 LGE-0FB-RYGB Color R: Y: Amber G: B: Blue C: Clear/White Top to bottom Type Blank: Continuous light FB: Continuous or flashing light with audible alarm LGE LGE LGE Signal Tower ø00 Height Light: Lights: 0. Lights: 67 Lights: 8. Height 8dB at m (FB type) Electronic Sound (FB type) ø00 IP NPN/PNP Open collector -M ''Super Bright'' provides highest level of visibility. Wiring Diagram Max. panel thickness 9 RED - ø6 ø70 AMBER GREEN BLUE CLEAR/WHITE Large Signal Tower featuring enhanced visibility and downward illumination, designed for large machines. Triple Reflection system PATLITE's large prism cut lens: For enhanced downward illumination (cut lens:?00mm x 60mm high). Newly developed triple-reflection system: For enhanced visibility and low power consumption. Lighting Pattern: Flashing and continuous. FB type: Built-in buzzer with volume up to 8dB at m. Installation: Direct mount. Interchangeable Modules: No re-wiring even after installation. Lens: Superior impact and heat resistant polycarbonate resin for superior durability and light transmission. NPN/PNP compatible: V DC type; 00/0V AC compatible with NPN only. CE Compliance: V AC/DC type ONLY. Available Colors:, Amber,, Blue and Clear/White. LGE type Number of stacks Note: See 6 for wiring diagram LGE Consumption How to order LGE-0 / 0FB V AC/DC Light LGE-0 / 0FB 00V AC LGE-0 / 0FB 0V AC Interchangeable modules Changeable color sequence: Easy to add / remove up to colored modules even after installation. Note: modules of the same color within a signal tower will light up simultaneously. Easy to add and remove If the number of module is changed, center shaft must be purchased. Lights Lights Lights LGE-0 / 0FB LGE-0 / 0FB LGE-0 / 0FB LGE-0 / 0FB LGE-0 / 0FB LGE-0 / 0FB LGE-0 / 0FB LGE-0 / 0FB V AC/DC 00V AC 0V AC V AC/DC 00V AC 0V AC V AC/DC 00V AC LGE-0 / 0FB 0V AC The wiring remains the same.w.7w.w 8.W 6.W 0.7W 8.W.W FB type: approx. 60 flashes per minute. Each color of module corresponds to the lead wire color. 7 8

26 Max. 6 sec. V AC Outer Contacts Continuous rate Signal Line Current A 90mA Flashing Sound signal line Lamp Signal Line LGEH Sound Signal Line Current FL,FK : V DC Current: ma FV : 0VDC Current: ma How to order Light LGEH: LGH: Incandescent bulb Stack LGEH: ~ LGH: ~ 0: V AC/DC 0: 00V AC 0: 0V AC LGEH-FV Total 6 second long recording capacity can be divided up to messages. LGH-FK, LGEH-FK Comes with 8 alarm sounds. A type Beep (slow intermittent horn) Stutter (rapid intermittent horn) 6 Ch Ch Bell (clear high-pitched bell) 7 Yelp (rapid siren) 8 LGEH-FL LGEH-FV type V DC NPN Open Collector R Y G B C AUX OUT GND Blue BUSY OUT Orange STOP Lead Wire Skyblue Lead Wire Lead Wire Pink Lead Wire Light green Lead Wire Com Brown Rated Lamp, Lamp, Orange Lamp, Lamp, Blue Blue Lamp, Clear Light green Continuous Flashing Brown Supply Supply White Signal Line V AC/DC V AC/DC 00V AC 00V AC 0V AC 0V AC Shielded Cable L rate + Continuous LGEH-0FV-RYGB Type Outer contacts Flashing External Amplifier Sound Signal Line Lamp Signal Line LGH Incandescent bulb Sound Signal Line Rush Current Current Signal Line Current 7A 600mA 6A FK A 00mA A : V DC Current: ma A 00mA A FV: Voice Synthesizer FK: FL: & Melody Voice Synthesizer Rapid Hi-Lo Melody Synthesized Piano Synthesized Bell Comes with 6 melodies and chimes. TYPE OF SOUND Ch S type Q type Amaryllis Mary Had a Little Lamb Symphony No.0 The Camptown Races Silent Lakeside Cuckoo Mountain Musician smith in the Village Romance De Amour On the Avignon Bridge 6 Petrouchka Ob-La-Di,Ob-La-Da 7 8 Color R: Y: Amber G: B: Blue C: Clear/White Top to bottom LGEH / LGH LGEH / LGH LGEH / LGH Signal Tower (LGEH) (LGH) 0dB at m ø00 IP (FV type) NPN Open collector (V) ø Height Max.panel thickness 0 -M Wiring Diagram LGH-FK/LGEH-FK, FL type R A G B C Sound Signal Line Lead Wire Skyblue Lead Wire Lead Wire Pink Lead Wire Light green Lead Wire Lead Wire 6 Orange Lead Wire 7 Lead Wire 8 Blue Lead Wire COM Brown Outer contacts Lamp Signal Line Height Light: 7 Lights: 6 Lights: 97 Lights: 9 Lights: 0 Front Front ø0 - ø6 Continuous Flashing Lamp, Lamp, Amber Orange Lamp, Lamp, Blue Blue Lamp, Light green Continuous COM Flashing COM Brown Supply V AC/DC Supply White 00V AC 0V AC ø70 0 R Y G B C 0 LGH/LGEH-FK, FL type V DC NPN Open Collector Lead Wire Skyblue Lead Wire Lead Wire Pink Lead Wire Light green Lead Wire Lead Wire 6 Orange Lead Wire 7 Lead Wire 8 Blue Lead Wire COM Brown Lamp, Lamp, Orange Triple Reflection system Interchangeable modules Changeable color sequence: Easy to add / remove up to colored modules even after installation (LGEH type). Note: modules of the same color within a signal tower will light up simultaneously. Integrated signal device featuring enhanced visibility and 0dB at m adjustable volume perfect for noisy environments. PATLITE's large prism cut lens: For enhanced downward illumination (lens:?00mm x 60mm high). Newly developed triple-reflection system: For enhanced visibility and low power consumption. Lighting Pattern: Flashing and continuous. ADPCM 6kbit/s: High sound quality from LSI digital voice synthesizer (LGEH-FV type). Adjustable volume up to 0dB at m. Extended Life: Vibration-resistant Bayonet base incandescent bulbs (LGH type). Installation: Direct mount. Interchangeable Modules: No re-wiring even after installation. Lens: Superior impact and heat resistant polycarbonate resin for superior durability and light transmission. NPN compatible: V DC only. CE Compliant: V AC/DC type (LGEH-?0FK/FL/FV). Available Colors:, Amber,, Blue, Clear/White. Available by Special Order (LGEH type) AC 0V type. Easy to add or remove If the number of module is changed, center shaft must be purchased. LGEH-FV type R A G B C Sound Signal Line AUX OUT GND Blue BUSY OUT Orange + L STOP Lead Wire Skyblue Lead Wire Lead Wire Pink Lead Wire Light green Lead Wire COM Brown Shielded Cable External Amplifier Outer contacts Lamp Signal Line LGEH / LGH type Number of stacks LGEH-0F/LGH-0F Light LGEH-0F/LGH-0F LGEH-0F/LGH-0F LGEH-0F/LGH-0F Lights LGEH-0F/LGH-0F LGEH-0F/LGH-0F LGEH-0F/LGH-0F Lights LGEH-0F/LGH-0F LGEH-0F/LGH-0F LGEH-0F/LGH-0F Lights LGEH-0F/LGH-0F LGEH-0F/LGH-0F Lights LGH-0F LGH-0F LGH-0F LGH type: T0 BAD Continuous Flashing Lamp, Lamp, Amber Orange Lamp, Lamp, Blue Blue Lamp, Light green Continuous COM Flashing COM Brown Supply V AC/DC Supply White 00V AC 0V AC Lamp, Lamp, Blue Blue Lamp, Clear Light green Continuous Flashing Brown Supply Supply White Please cut shielded cable length as short as possible. Signal line voltage and current per module Rated Signal Line V AC/DC V AC/DC 00V AC 0V AC LGEH LGH Rated Consumption V type:( ) Range LGEH LGH V AC/DC V~6V AC/DC 0()W 8W.8kg.7kg 00V AC 90V~0V AC W 9W.0kg.8kg 0V AC 00V~0V AC V AC/DC V~6V AC/DC (6)W 8W.0kg.8kg 00V AC 90V~0V AC W 9W.kg.9kg 0V AC 00V~0V AC V AC/DC V~6V AC/DC (8)W 68W.kg.0kg 00V AC 90V~0V AC 8W 69W.kg.0kg 0V AC 00V~0V AC V AC/DC V~6V AC/DC 00V AC 90V~0V AC 0V AC 00V~0V AC V AC/DC V~6V AC/DC 00V AC 90V~0V AC 0V AC 00V~0V AC 6(0)W 08W 09W.kg.kg.6kg.kg FB type approx. 60 flashes per minute. BUSY Output Operating Temperature Range Volume AUX Output (Max load.) Channel Message Time W 88W 89W.kg.kg The wiring remains the same FV FK -0 C~+ C (Humidity 8% or less) -0 C~+ C (Humidity 8% or less) Max. 0dB at m -0dBv 600? V DC 00mA 8 Each color of module corresponds to the lead wire color. 9 0

27 Horizontal Mount 9 Flush Mount rear view: EDWM ( color ) EDLM / EDWM EDLM / EDWM EDLM / EDWM Explosion-proof Signal Tower ATEX & FM CENELEC Standards IP66 Testing Authority NEC Article 0 NPN/PNP Open collector* *AC 0/0/90-0V types are NPN compatible only EDLM EDWM Terminal block Standards : Compliance to ATEX and NEC standards. Connection : Easy wiring for parallel connection to another interlocking device through lead-in ports. Terminal Block : Easy connection to the signal tower by opening the bottom cover. Body : Made of aluminum alloy. Light Source : Long life, maintenance-free. Mounting : Wall mount, flush mount and horizonal mount. See. (Photo shows model EDWM.) EDLM & EDWM are covered by the specifications shown in the shaded areas below Common in Europe Classification ATEX, IEC/EU Directive 9/9/EC Common in the USA Classification NEC Article 0 NEC Article 00 (EDLM, EDWM) Standard IEC EN Standard (8) Lead-in port Plug Cover () PATLITE s EDLM, EDWM PATLITE s ø. 6 8 O-ring (86) 6 Present Continuously (0) ø0 ø0 Fitting bracket Upper case modules (8) Glass case Lower case Lead-in port /? NPT /? NPT Zone 0 Zone Zone Present Continuously Ground terminal M screw ATEX directive is CENELEC standard. Present Intermittently Installation (Wall-mount) 6 7 (Horizonal-mount) Present Abnormally NEC standard is National Electrical Code. Present Intermittently Present Abnormally ANSI/NFPA 7 EDLM, EDWM Zone 0 Zone Zone ANSI/NFPA 70 Division Division Cable gland* /? NPT (60) *ATEX model... Included *NEC model... Sold separately 9 6 Bracket for flush mount ø ø9 Wall Mount ø ø9 Terminal block Specifications (ATEX) Type Rated voltage Signal line current (Per module) EDLM-0FE AC/DC V Explosion protection ratings llg Ex d?c T6 (Zone,)?D Ex td A IP66 T80? (Zone, ) Operating temp. Operating humidity Ambient pressure Lighting pattern IP Vibration resistance -0?~+0? (no ice) %~8%RH (Keep from dew condensation) 80~0kpa Flashing (60± flashes per minute) / Continuous light IP66 9.8m/s Mounting Luminosity (Main body) Material Specifications (NEC) Type Rated voltage Signal line current (Per module) Explosion protection ratings Operating temp. Operating humidity Ambient pressure Lighting pattern IP Vibration resistance Mounting Luminosity (Mainbody) Material EDLM-0FA AC/DC V EDLM-FE AC 0V /Amber:.mA : 0.0mA Outdoor & Indoor Upright : 0mcd, Amber: 80mcd : 00mcd.kg Upper & Lower case : Aluminum alloy(housing finish: Melamine baking finish) Glass case : Borosilicate glass Fitting bracket : Stainless steel (SUS 6) Cable gland : Brass EDLM-FA AC 0V /Amber:.mA : 0.0mA Outdoor & Indoor Upright : 0mcd, Amber: 80mcd : 00mcd.kg EDLM-FE AC 0V EDLM-FA AC 0V Class?, Zone AEx d?c T6 -?~+0? (no ice) %~8%RH (Keep from dew condensation) 80~0kpa Flashing (60± flashes per minute) / Continuous light IP66 9.8m/s EDWM-0FE EDWM-MFE AC/DC V AC 90~0V :.6mA, Amber: 6.6mA, : 7.mA Blue/White: 8.9mA Outdoor & Indoor Upright & Sideways //White: 000mcd Amber: 700mcd, Blue: 00mcd.7kg EDWM-0FA EDWM-MFA AC/DC V AC 90~0V :.6mA, Amber: 6.6mA, : 7.mA Blue/White: 8.9mA Outdoor & Indoor Upright & Sideways //White: 000mcd Amber: 700mcd, Blue: 00mcd.7kg Upper & Lower case : Aluminum alloy(housing finish: Melamine baking finish) Glass case : Borosilicate glass Fitting bracket : Stainless steel (SUS 6) Wiring Diagram (EDLM ( color )) Wiring Diagram (EDLM ( color )) EDLM-0FE/FA Orange Brown L R L Y L G F C V EDLM-FE/FA EDLM-FE/FA / L R L Y L C G C <Casing main body> V Orange Brown F V C PWR wire PWR wire Flashing COM Amber <Casing main body> V Set screw PWR wire PWR wire Flashing COM Continuous COM Amber < Non-hazardous area > external protection fuse A Continuous light Outer contacts Flashing Outer contacts < Non-hazardous area > external protection fuse A Continuous light Outer contacts Flashing Outer contacts 8 EDWM-0FE/FA EDWM-MFE/FA <Casing main body> Orange Blue White Brown L R / L Y L G L B L W F C <Casing main body> V V PWR wire PWR wire Flashing COM White Blue Amber Orange Blue White Brown L R L Y L G L B L W C C F C V V PWR wire PWR wire Flashing COM Continuous COM White Blue Amber < Non-hazardous area > external protection fuse A Continuous light Outer contacts Flashing Outer contacts < Non-hazardous area > external protection fuse A Continuous light Outer contacts Flashing Outer contacts

28 NE- NE- Signal Light MEMO ø7 IP6 pending NPN/PNP Open collector NE series Dome Indicator Light The dome shape provides increased visibility and the s provide years of maintenance-free operation. Enhanced Illumination : Use of long-life, super bright. Energy Efficient : Low power consumption. Maintenance-Free : High vibration resistant and no bulb replacement needed. Terminal Block : For easy wiring. Applications : Suitable for small machine tools, control panel, etc. Available colors :, Amber,, Blue, Clear/White. NE- type ø7 ø.6 7 Rated voltage NE- V DC (No polarity) NPN/PNP open collector Wire entry hole Operating voltage range.6v ~6.V DC M6 P. -ø. Consumption Amber Blue Clear/White 0.6W 0.6W 0.6W 0.W 0.W Operating temperature range (Relative humidity) Mounting place Mounting direction Protection rating -0?~+ 0? (Less than 90%) Indoor & Outdoor Upright, Upside down & Horizontal IP6. Vibration proof 9.6m/s Luminous intensity Amber Blue Clear/White 00mcd 00mcd 0mcd 00mcd 60mcd g

29 0.kg 0.kg 0.kg 0.kg 0.kg 0.kg 0.kg 0.kg 0.kg PES 0 ø External contact ø8 Wire exit ø (Unit: mm) -M Length from line exit line 000, Signal line 900 Length from hook line 960, Signal line 860 (A) proof Current leak How to order : V AC/DC 00: 00V AC 00: 00V AC Type Blank: Continuous or flashing light B (PEW type only): Continuous or flashing light with audible alarm PEW-B-R 6 PEW/PES Color R: Y: Amber G: B: Blue PEW / PES PEW / PES PEW / PES Signal Light 8dB at m (PEW-B only) Electronic Sound (PEW-B only) ø8 IP* NPN Open collector *PES: IP with rubber gasket SZ-0 (IP without SZ-0) *PEW: IP (IP : Using the side wire exit) PEW type Dome shape Signal Light featuring enhanced visibility and maintenance-free operation. PES type Optional Rubber Gasket SZ-0 Newly Developed Triple-reflection System: For enhanced visibility and low power consumption. Flashing Cycles: patterns 60/0/80 fpm, selectable by a switch. PEW-B type: Built-in audible alarm with adjustable volume up to 8dB at m. Maintenance-free: s power consumption is approx. half of incandescent bulb type (00V/00V AC). Installation: Indoors upright, inverted, sideways; Outdoors upright only. Dome: Superior weather resistant and light translucent acrylic resin. PEW: IP (IP : Using the side wire exit); PES: IP (with optional rubber gasket SZ-0, IP without SZ-0). CE Compliance: V AC/DC type ONLY. Available Colors:, Amber,, Blue. (PEW, PES) PEW Wire exit 77 7 Wire entry ø 0 Wiring Diagram ø07 ø8 R Baffle Side line 970 Signal line 870 ø97 -M tapping screw or - ø hole Light Flash 0 All models have the same wiring. Brown Sky-blue Common * Skyblue line exists on buzzer type only. Transistor Operation Example Transistor NPN Current capacity Available by Special Order Silver Color Body. IP6: PEW type only. UL type (E660). PEW/PES type Consumption Flash Frequency Triple Reflection system Max. 8dB at m Max. 8 R/Y PEW- G/B R/Y PES- G/B R/Y PEW-B G/B R/Y PEW-00 G/B R/Y PES-00 G/B R/Y PEW-00B G/B R/Y PEW-00 G/B R/Y PES-00 G/B R/Y PEW-00B G/B V AC/DC 00V AC 00V AC.W.W.W.8W.W.8W.6W.W.6W Approx. 80 times/minute Approx. 0 times/minute Approx. 60 times/minute

30 PSX Signal Light Xenon ø8 IP With SZ-0 Consumption Rush Current Double Flashes PSX-00 00V AC.0W A flashes/min PSX-0 AC 0V.W 0A Rush current of this product is very high. Please check the outer contact capacity. 7 8 PSX PS / PSF PS / PSF Signal Light ø8 IP With SZ-0 Optional Rubber Gasket SZ-0 Optional Rubber Gasket SZ-0 Silver Color Body Available by Special Order Compact, anti dazzle Signal Light featuring simple function suitable for small devices. Original Prism Cut Lens: For enhanced visibility and high illumination in every direction. Flashing Cycle: 60 flashes/min. for PSF type. Installation: Indoors upright, inverted, sideways; Outdoors upright only. Main Body: Superior impact and heat resistant ABS resin. Dome: Superior impact and heat resistant polycarbonate resin. CE compliance: V AC/DC type. Available Colors:, Amber,, Blue. Xenon Signal Light featuring long-lasting afterglow ideal for use in bad weather or snow. Original Prism Cut Lens: For enhanced visibility and high illumination in every direction. Double Flashing: For enhanced visibility (night-time visibility:,000m+). Installation: Indoors upright, inverted, sideways; Outdoors upright only. Main Body: Impact and heat resistant ABS resin. Dome: Superior impact and heat resistant polycarbonate resin. IP with the optional rubber gasket SZ-0. Available Colors:, Amber,, Blue. Available by Special Order Silver Color Body. PS / PSF type PSX type -M ø8 7 Wire exit hole ø ø ø0 Flashes per Minute No. PS-/PSF- V AC/DC V 0W 9 PS-/PSF- V AC/DC 60 times/minute V 0W 0 PS-00/PSF-00 00V AC (PSF type) 0V 0W 0.kg PS-0/PSF-0 0V AC 0V 0W V/V G8 BAS 0V/0V T0 E -M ø8 7 Wire exit hole ø ø ø0

31 KX- KX- KX-00 KX-0 00V AC 0V AC W KX Signal Light Consumption Rush Current V DC 8W V DC 0A A Flashes per Minute 0~90 Rush current of this product is very high. Please check the outer contact capacity. KX KHE KHE Multi Signal Light ø00 IP6 With SZ-00A Optional Rubber Gasket SZ-00A Optional Rubber Gasket SZ-00A Xenon ø00 IP With SZ-00A Multi Signal Light featuring three flashing patterns for diverse use. Flashing Pattern: Patterns Simulated Rotation, Strobe, Blinking. Enhanced Illumination: Use of long-life, super bright. Maintenance-free: No bulb replacement needed. Energy Efficient: Low power consumption. Extended Product Life: Longer life without the use of a motor. Installation: Indoor: upright, inverted and sideways; Outdoors: upright only. Available Colors:, Amber,, Blue. Available by Special Order Silver Color Body. Xenon Signal Light featuring superior night-time visibility and adjustable flashing cycle. Newly Developed Prism Cut Lens: For bright illumination and improved visibility from all directions. Extended Life: Shock resistant xenon, even under severe vibration. Installation: Upright, inverted and sideways for indoors only. Main Body: Impact and heat resistant ABS resin. Lens: Superior impact and heat resistant polycarbonate resin for superior durability and light transmission. Superior Visibility: Intensive flashing using a xenon lamp (night-time visibility:,000m or more). Flashing Cycle: Adjustable between 0~90 times/minute. IP with the optional Rubber gasket SZ-00A (IP without SZ-00A). Available Colors:, Amber,, Blue. Available by Special Order Silver Color Body. UL type (E660). KHE type KX type?00 Color Consumption Current Luminosity (6) (90) 9 0 -?6?70.7?0 Wire exit 0 KHE- V DC (no polarity) Amber Blue 8.W 8.W 0.W.6W 0mA 0mA 0mA 900mA 0cd cd cd cd 9 ø00 - ø. 0 0 Wire entry hole ø8 ø70 6 () (?7.9). -M (70) 6 -M

32 XL-M Current.A (V DC) ~V DC.A (V DC) XL Signal Light Xenon ø6 6 6 Flashes per Minute 70~90 (adjustable).0kg XL XP XP Signal Light Xenon ø6 IP Corrosion-proof plastic Signal Light with triple flashing. Newly Developed Prism Cut Lens: For bright illumination and improved visibility from all directions. Superior Visibility: Intensive flashing using a xenon lamp (night-time visibility:,000m or more). Extended Life: Shock resistant xenon, even under severe vibration. Installation: Indoors upright, inverted, sideways; Outdoors upright only. Main Body: Impact and heat resistant ABS resin. Lens: Superior weather resistant and light translucent AS resin. Available Colors:, Amber, Blue. Xenon Signal Light with corrosion-proof stainless steel body. Newly Developed Prism Cut Lens: For bright illumination and improved visibility from all directions. Superior Visibility: Intensive flashing using a xenon lamp (night-time visibility:,000m or more). Installation: Indoors upright, inverted, sideways; Outdoors upright only. Main Body: Corrosion proof stainless steel body (SUS0) with stainless steel fixing bolt. Lens: Superior impact and heat resistant polycarbonate resin for superior durability and light transmission. Available Colors:, Amber, Blue. XP type XL type -M8 ø Wire exit hole ø0 - ø9 Current Flashes per Minute XP- V DC.A XP- V DC 0.7A 0 XP-00 00V AC 0.A XP-0 0V AC 0.A Rush current of this product is very high. Please check the outer contact capacity..kg.kg ø0 -M8 ø ø9 Wire exit hole ø0

33 KPE KPE Signal Light SKHE / SKHEB chip super bright Revolving Warning Light SKHE / SKHEB ø6 IP Drip-proof 90dB at m (SKHEB type) ø8 IP Revolving Warning Light featuring Rust-free plastic,, adjustable flashing cycles, and maintenance-free design. Enhanced Illumination: Special high intensity illumination design for improved light diffusion, ensuring sufficient brightness even outdoors. Flashing Cycle: Adjustable flashes between 0~00 times/minute with internal volume. Extended life: No bulb replacement needed with long-life, perfect for "hard-to-service" locations. Installation: Indoors upright, inverted, sideways; Outdoors upright only. No Motor: No worn-out motor within electronic rotating light system. Main Body: Weather resistant special resin. Dome: Superior weather resistant and light translucent acrylic resin. Stainless Mounting Bolts: Corrosion-proof screws, even in marine environment. Available Colors:, Amber. Compact revolving warning light featuring enhanced illumination with chip super bright and new high dispersion reflection system. Colors available :, Amber,, Blue. SKHEB series has an integral alarm (hi-pitch tone 90dB at m ) that sounds with light operation. Compact Motor : High durability and energy-efficient. Energy-Efficient : Maintenance-free chip super bright. Dome lens : Made of acrylic resin with superior weather resistance and light translucence. Installation : Indoors-Upright, inverted, sideways; Outdoors-upright only. CE Compliant (V DC, V DC type only) Newly developed reflector for revolving warning light. PATLITE revolving warning light uses a unique (patented) reflecting system solely designed for these models. Even though the dispersion effect of the unit is less than an incandescent bulb, PATLITE revolving warning light creates the equivalent dispersion effect with the light reflector. The newly designed reflector enables not only upward and sideway light reflections, but also downward light reflection that is not achieved by incandescent bulb type revolving warning lights. PATLITE revolving warning light is suitable for applications where high visibility from below is required. -M8 ø Wire exit hole ø ø9 ø0 0 - ø9 KPE type Current KPE-00 KPE-0 00V AC 0V AC 0mA/00mA 0mA/0mA Operating Temperature Range: -0 C ~ +60 C Flashes per Minute 0~00 (revolution) 60 (flashes).kg ø0 -M ø8 8 Mounting 0 0 Wire exit hole ø70 -ø6 (unit: mm) SKHE type Size ø8 SKHE/SKHEB- DC Current Consumption Rotations per Minute Weight 0.A 0 0.kg SKHE/SKHEB- V DC 0.6A 0 0.kg SKHE/SKHEB-00 00V AC 0.0A 0 0.6kg SKHE/SKHEB-00 00V AC 0.0A 0 0.6kg 6 6

34 RLE Revolving Warning Light ø8 IP With SZ-0 Drip-proof 6 66 RLE RKE / RHE RKE / RKEB / RHE / RHEB chip super bright Revolving Warning Light ø00 IP With SZ-00A (RKEB/RHEB type) RHE Optional Rubber Gasket SZ-00A RKE Optional Rubber Gasket SZ-0 Compact revolving warning light featuring enhanced illumination with chip super bright and new dispersion reflection system. Colors available:, Amber,, Blue. RHEB/RKEB series has an integral alarm (hi-pitch tone 90dB at m) that sounds with light operation. Compact Motor: High durability and energy-efficient. Energy-Efficient: Maintenance-free chip super bright. Dome lens: Impact and heat resistant polycarbonate resin. Main Body: Impact and heat resistant ABS resin. CE Compliant (V DC, V DC type only). Terminal Block: For easy wiring.?00 -M Mounting -?6 70 Wire exit hole 0 0 R R?70 Wire exit hole Newly developed reflector for revolving warning light. RKE/RHE type PATLITE revolving warning light uses a unique (patented) reflecting system solely designed for these models. Even though the dispersion effect of the unit is less than an incandescent bulb, PATLITE revolving warning light creates the equivalent dispersion effect with the light reflector. The newly designed reflector enables not only upward and sideway light reflections, but also downward light reflection that is not achieved by incandescent bulb type revolving warning lights. PATLITE revolving warning light is suitable for applications where high visibility from below is required. Size Current Consumption Rotations per Minute Weight?00 RHE-/RKE- V DC 0.6A 0 0.kg?00 RKE/RKEB- V DC 0.6A 0 0.kg Signal Light featuring energy-saving and enhanced illumination with integrated reflection system. Integrated Reflection System: For enhanced illumination. Compact Motor: High durability and energy-efficient. Energy-Efficient: Maintenance-free. Installation: Indoors upright, inverted, sideways; Outdoors upright only. Main Body: Impact and heat resistant ABS resin. Dome: Superior impact and heat resistant polycarbonate resin. Available Colors:, Amber,. -M ø8 7 Wire exit hole ø ø ø0 RLE type RLE- RLE- RLE-00 RLE-0 V DC V DC 00V AC 0V AC Consumption Rotations per Minute.7W MAX.9W MAX W MAX W MAX 0 0.kg 0.6kg : Special order (unit: mm)

35 RH-A / RK-A Revolving Warning Light Terminal 90dB at m (RHB and RKB Types) Electronic Sound (RHB and RKB Types) ø00 IP With SZ-00A RH-A / RK-A RU / RS RU / RS Revolving Warning Light With optional rubber gasket ø8 IP With SZ-0 RU Optional Rubber Gasket SZ-0 RS Optional Rubber Gasket SZ-00A Compact Revolving Warning Light perfectly designed for small devices. Integral Rotating Parabolic Reflector: For enhanced visibility from a distance. Extended Life: Vibration resistant automobile bulb. Installation: Indoors upright, inverted, sideways; Outdoors upright only. Main Body: Impact and heat resistant ABS resin. Dome: Superior impact and heat resistant polycarbonate resin. CE Compliant: V DC, V DC type only. Available Colors:, Amber,, Blue. Available by Special Order Silver Color Body. RUP series furnished with mounting pole and bracket. RU/RS- RU/RS- RU/RS-00 RU/RS-0 RU/RS-AC G BA9S Current Rotations per Minute No. RU/RS V DC 0.A V6W 8 V DC 0.A V6W 9 0.kg 00V AC 0.A 0 V6W 8 0.6kg 0V AC 0.0A V AC 0.A V6W 9 0.kg RUP 0.8kg.0kg 0.8kg Integral Rotating Parabolic Reflector: For enhanced visibility from a distance. Extended Life: Vibration-resistant automobile bulb. Built-in : Built-in audible alarm up to 90dB at m for RHB/RKB. Installation: Indoors upright, inverted, sideways; Outdoors upright only. Terminal Block: For easy wiring. Main Body: Impact and heat resistant ABS resin. Dome: Superior impact and heat resistant polycarbonate resin. CE Compliant: V DC, V DC type only. Available Colors:, Amber,, Blue. AUL type comes with rubber basket SZ-00A. Available by Special Order (RH type) Silver Color Body. UL type (E660). RU/RS type RH-A / RK-A type RU RS -M ø8 70 ( 7) RU/RUP-, 7 (AC Type) 7 (DC Type) 0 ( ) (AC Type) (DC Type) Wire exit hole (With SZ-0) ø ø0 6 Wire entry hole RUP : Special order Compact Revolving Warning Light featuring high durability and easy wiring with terminal block. RH RK ø00 ø00 -M (DC/V type: 8) (AC Type) 8 (DC Type) hole (RHB/RKB) - ø6 Wire entry hole (With SZ-00A) R R ø70 Wire entry hole G8 BAS Rotations Current per Minute No. RH/RHB/RK/RKB-A (UL) RH/RHB/RK/RKB-A (UL) RH/RHB/RK/RKB-00A (UL) RH/RHB/RK/RKB-0A (UL) RH/RHB/RK/RKB-00A RH/RHB/RK/RKB-0A (UL) V DC V DC 00V DC 0V AC 00V AC 0V AC 0.8A 0.A 0.06A 0.A 0.0A 0.0A 70 V0W 9 V0W 0 VW 0.kg 0.6kg -M? M 6

36 WH-A type WH-A Revolving Warning Light 90dB at m (WHB-A type) WH-A SKH-EA SKH-EA Revolving Warning Light ø00 IP Electronic Sound (WHB-A type) ø00 IP (WHB: IP) Best-selling Revolving Warning Light for wide range of applications. Integral Rotating Parabolic Reflector: For enhanced visibility from a distance. Extended Life: Vibration-resistant automobile bulb. Installation: Indoors upright, inverted, sideways; Outdoors upright only. Dome: Superior weather resistant and light translucent acrylic resin. CE Compliance: For V DC, V DC type only. Available Colors:, Amber,, Blue. Easy to attach to an electrical box and the terminal block allows easy wiring. Installation in various directions is available for indoor use. Sideways Upside down When installing the WHB, please keep it's buzzer outlet faced downward. Wall-mount Revolving Warning Light featuring easy wiring with terminal block. Built-in : Audible sound volume up to 90dB at m, synchronized with light. Extended Life: Vibration-resistant automobile bulb. Installation*: Indoors, Outdoors upright, inverted, sideways. Terminal Block: For easy wiring. Main Body: Impact and heat resistant ABS resin. Dome: Superior impact and heat resistant polycarbonate resin. Compact Motor: Higher durability and energy-efficient. CE Compliant: For V DC type only. Available Colors:, Amber,, Blue. * WHB type: upright only (outdoors). Available by Special Order Silver Color Body. IP6. SKH-EA type ø9 -M ø ø 0 0 Wire exit hole ø70 SKH-EA SKH-EA SKH-00EA SKH-00EA G8 BAS V DC V DC 00V AC 00V AC Current 0.8A 0.A 0.06A 0.0A Rotations per Minute No. V0W 9 V0W 0 70 VW 0.kg 0.6kg 66 7 ø ~8 A 80 A Wire entry hole A 66~8 9. R. 80 Current Rotations per Minute No. WH-A V DC 0.A V0W 0 0.kg WH-00A 00V AC 0.07A VW 0.7kg WH-00A 00V AC 0.0A 70 WHB-A V DC 0.A V0W 0 0.kg WHB-00A 00V AC 0.07A VW 0.7kg WHB-00A 00V AC 0.0A G8 BAS 69 70

37 SKP-A type SKP-A Revolving Warning Light Current Rotations per Minute SKP-0A V DC.6A SKP-0A V DC.A SKP-0A 8V DC 0.8A 0 SKP-0ADC 00V DC 0.A SKP-0A 00V AC 0.A SKP-0A 00V AC 0.A 0 V/V RP BAS 8V/0V/0V RP BAD No. VW.0kg VW 8VW 0V0W 6.kg 0V0W 6 0V0W 7 : Special order 7 7 ø8 SKP-A SKH-A SKH-A Revolving Warning Light 90dB at m (SKHB type) Electronic Sound (SKHB type) ø8 IP6 (SKH-SA type) (others: IP) IP Corrosion-proof plastic Revolving Warning Light for wide range of applications. Integral Rotating Parabolic Reflector: For enhanced visibility from a distance. Extended Life: Vibration-resistant automobile bulb. Built-in : Audible sound up to 90dB at m, synchronized with light function. Installation: Indoors upright, inverted; Outdoors upright only. Dome: Superior weather resistant and light translucent acrylic resin. CE Compliant: V DC, V DC type only. Available Colors:, Amber,, Blue, Purple. Environment resistant and corrosion-proof Revolving Warning Light featuring silent and stable rotation. Rotary Mechanism: Gear-driven, for stable rotation under vibration. Installation: Indoors upright, inverted, sideways; Outdoors upright only. Main Body: Melamine baked finish with corrosion-proof stainless steel (SUS 0) lens mounting fixture. Dome: Superior impact and heat resistant polycarbonate resin. CE Compliant: V DC, V DC, 8V DC type only. Available Colors:, Amber,, Blue. SKH-SA Installation: Indoors upright, inverted. ø0 -M ø8 (00,0V type:0) 6 (DC type) (AC type) - ø ø6 Wire exit hole ø Wire exit hole ø70 SKH-A type Current Rotations per Minute SKH-0A/SKHB-A V DC 0.8A SKH-0A/SKHB-A V DC 0.A SKH-0A/SKHB-00A 00V AC 0.06A 70 SKH-0A/SKHB-00A 00V AC 0.0A SKH-0SA V DC 0.A SKH-0SA 00V AC 0.A Blub G8 BAS No. V0W 9 V0W 0 VW V0W 0 VW 0.kg 0.6kg 0.kg 0.6kg ø0 -M8 ø Wire exit hole 0 - ø9 0 ø0

38 SKHB-006A Revolving Warning Light Current Rotations per Minute No. SKHB-006A SKHB-006MA G8 BAS SUM- 0.6A Electronic Sound ø6 IP VW 8.8kg.9kg SKHB-006A KP-A KP-A Revolving Warning Light ø6 IP Rust-free plastic Revolving Warning Light for a wide range of applications. Integral Rotating Parabolic Reflector: For enhanced visibility from a distance. Extended Product Life: Vibration resistant and reliable operation even under severe cold environment (-0?). Installation: Indoors upright, inverted, sideways; Outdoors upright only. Main Body: UV and water-proof special resin. Dome: Superior weather resistant and light translucent acrylic resin. Mounting Bolts: Drip-proof and rust-free stainless steel type. CE Compliant: V DC type only. Available Colors:, Amber,, Blue. Portable Revolving Warning Light with dry cell battery. Built-in : Operation selectable with external switch for light rotation with buzzer or light rotation only (solenoid buzzer sound). Battery Life: SUM- : about hours; LR0 : about hours. Installation: Upright only. Dome: Superior weather resistant and light translucent acrylic resin. 006MA type: includes a powerful magnet for secure placement. Available Colors:, Amber. KP-A type SKHB-006A type ø -M8 ø Wire exit hole ø0 - ø9 Current Rotations per Minute KP-A V DC.A 0 KP-00A 00V AC 0.A KP-00A 00V AC 0.A 0 V RP BAS 0V/0V RP BAD No. VW 0V0W 6 0V0W 7.0kg.kg.kg ø ø0 ø6 8

39 SKLB-0A 00V AC SKLB-0A 00V AC RP BAD SKLB-A Revolving Warning Light Current 0.A 0.A 80dB at m Electronic Sound Rotations per Minute No. 0 0V0W 6 0 0V0W ø6.8kg SKLB-A SKL-A SKL-A Revolving Warning Light Melamine Baked Finish Steel Body SKL-CA Type ø6 IP Stainless Steel Body SKL-SA Type Large Basic Revolving Warning Light with highly durable housing. Installation: Indoors upright, inverted, sideways; Outdoors upright only. Main Body: SKL-CA - Scratch-free melamine baked finish; SKL-SA - Corrosion-proof stainless steel body (SUS0). Dome: Superior impact and heat resistant polycarbonate resin. Available Colors:, Amber,, Blue. Revolving Warning Light featuring built-in buzzer up to 80dB at m. Built-in : Intermittent buzzer in levels of volume low: 6dB at m, medium: 70dB at m, high: 80dB at m. selectable by external switch (60 times/min.). Installation: Indoors upright, inverted, sideways; Outdoors upright only. Dome: Superior impact and heat resistant polycarbonate resin. Available Colors:, Amber. SKL-A type SKLB-A type ø0 SKL-0CA/0SA V DC Current.6A Rotations per Minute VW No. ø ø9 Wire exit hole 0 0 ø0 SKL-0CA/0SA V DC.A SKL-0ACSA V AC 0 SKL-0CA 8V DC 0.8A SKL-0CA/0SA 00V AC 0.A SKL-0CA/0SA 00V AC 0.A 0 V/V RP BAS 8V/0V/0V RP BAD VW 8VW 0V0W 0V0W 6 7.kg.kg : Special order ø9 0 0 Wire exit hole ø0 -M8 ø M8 ø6 7 0

40 Current Rotations per Minute KG- V DC.7A VW 0.7kg KG- V DC.A VW 80 KG-00 00V AC 0.A 0V0W 0.9kg KG-00 00~0V AC 0.A 0V0W RP BAS KG Revolving Warning Light ø86 Dual-face reflector IP KG HP HP Revolving Warning Light Halogen (Sold separately) ø8 Main Body: Impact and heat resistant ABS resin. Dome: Superior weather-resistant and light translucent acrylic resin. Range: V, V DC. Available Colors:, Amber, Blue. sold separately (H). Dual-face reflector: For powerful rotary flash. Compact Motor: High durability and energy-efficient. Installation: Indoors: Upright, inverted, sideways. Outdoors: Upright only. Main Body: body for resistance to harsh weather and UV rays. Dome: : AS resin; Amber: PS resin. Available Colors:, Amber. HP type KG type ø ø0 Halogen Rotations Rated is sold Per ( separately ) Minute VW HP-/ V/V DC or V70W 60.0kg :V W H, V 70W H : Special order ø ø9 0 ø0 Wire exit hole 0 0 Large Revolving Warning Light with solid design. Light and large Revolving Warning Light with dual-face reflector. 0 ø80 - ø7 -M8 0 0

41 RV-0A 00V AC RV-0A 00V AC RP BAS RV-A Revolving Warning Light Current 0.A 0.A ø87 Vibration-proof Rotations per Minute 0 0 No. VW.kg RV-A SKC-A SKC-A Revolving Warning Light ø87 IP Dual-face reflector Large Revolving Warning Light featuring powerful flash using dual-face reflector. Dual-face reflector: For powerful rotary flash. Rotary Mechanism: Belt-drive, for extremely quiet and stable rotation. Compact Motor: Higher durability and energy-efficient. Extended Product Life: Vibration resistant and reliable operation even under severe cold environment (-0?). Installation: Indoors upright, inverted, sideways; Outdoors upright only. Main Body: Melamine baked finish with corrosion-proof stainless steel (SUS 0) lens mounting fixture. Dome: Superior weather resistant and light translucent acrylic resin. Available Colors:, Amber,, Blue. CE compliant: DCV, V type only. Vibration-proof Revolving Warning Light, ideal for devices with high vibration such as overhead, gantry, and jib cranes. Integral Rotating Parabolic Reflector: For enhanced visibility from a distance. Rotary Mechanism: Belt-drive, for stable rotation under vibration. Extended Product Life: Vibration resistant and reliable operation even under severe cold environment (-0?). Extended Life: Vibration resistant automobile bulb. Dome: Superior weather resistant and light translucent AS resin. Available Colors:, Amber. SKC-A type RV-A type ø66 -M8 ø DC type 6 AC type 7 8 Wire exit hole 0 - ø9 0 0 ø0 Current Rotations per Minute SKC-0A V DC.6A VW SKC-0A V DC.A 00 VW SKC-0A 00V AC 0.A 0V0W SKC-0A 00V AC 0.A 60 0V0W V/V RP BAS 0V/0V RP BAD No kg.8kg ø66 -M8 ø Wire exit hole 0 - ø9 0 0 ø0

42 RES-0A 0~0V AC RES-A Explosion-Proof Revolving Warning Light Current 0.9A 0.A 0.A 0.A 0.0A Rotations per Minute ø Explosion-proof V0W V0W 8V0W VW Blub G8 BAS : Special order 8 8 IP6 No kg RES-A SKV-A SKV-A Revolving Warning Light ø0 IP66 Corrosion-resistant Revolving Warning Light. Installation: Upright, inverted, sideways. Main Body: Corrosion-resistant aluminum alloy die-cast with metal cable gland. Dome: Superior impact and heat resistant polycarbonate resin. Operating Temperature Range: -0?~80?. Available Colors:, Amber. Compact explosion-proof revolving warning light with parabolic reflector. Integral Rotating Parabolic Reflector: For enhanced visibility from a distance. Installation: Indoors upright, inverted, sideways; Outdoors upright only. Main Body: Aluminum alloy die-cast with silver color baked finish. Dome: Acrylic resin covered with clear hard-glass, and metal guard. Product Standards: IEC Standards (IEC ExdIIB + HT6) Zone, compliant. Approved by: TIIS. Available Colors:, Amber,, Blue. ø ø9 ø0 SKV-A type RES-A type Current Rotations per Minute No. SKV-0A V DC.6A VW SKV-0A V DC.A 0 VW.6kg SKV-0A 00V AC 0.A 0V0W 6.8kg SKV-0A 00V AC 0.A 0 0V0W 7 V/V RP BAS 0V/0V RP BAD : Special order ø9 0 0 RES-A RES-A RES-8A RES-00A RES-A RES-0A V DC V DC 8V DC 00~0V AC ~0V AC 00~0V AC -M8 ø0 9 0

43 0 KJS (KJSB) Wire exit hole ø ø70 KJSB-0-RYG Type B: With audible alarm 8 Stack ~ Color R: Y: Amber G: B: Blue Top to bottom 0: V DC 0: V DC 0: 00V AC 0: 0V AC KJS / KJSB KJS / KJSB KJS / KJSB Cube Tower 8dB at m Electronic Sound (KJSB type) 8 IP NPN Open collector Compact Cube Tower featuring built-in buzzer designed for applications with small equipment. Integral Rotating Parabolic Reflector: For enhanced visibility from a distance. Flashing Cycle: 60 times/min. Built-in : Intermittent buzzer volume up to 8dB at m. Installation: Upright only. Main Body: Impact and heat resistant ABS resin. Lens: Superior weather resistant and light translucent AS resin. Spare : Included. Available Colors:, Amber,, Blue. Wire ø9 8 Height 7 Wiring Diagram KJS / KJSB type Height Light: 7 Lights: 6 Lights: 9 Blue COM Brown White V DC V DC 00V AC 0V AC Outer Contact KJS does not have gray wires. Mind the polarity in case of DC power. Lamp Wire Current ma + - Wire Current 00mA - ø 0 NPN open collector transisfor Transistor Capacity (NPN) Current Capacity Withstand Lamp Wire Contact Capacity More than 0mA,, Blue, COM Brown Current consumption and contact capactiy per module Wire Contact Capacity More than 00mA How to order Number of stacks KJS/KJSB-0 KJS/KJSB-0 Light KJS/KJSB-0 KJS/KJSB-0 KJS/KJSB-0 KJS/KJSB-0 Lights KJS/KJSB-0 KJS/KJSB-0 KJS/KJSB-0 KJS/KJSB-0 Lights KJS/KJSB-0 KJS/KJSB-0 G8 BAS V DC V DC 00V AC 0V AC V DC V DC 00V AC 0V AC V DC V DC 00V AC 0V AC Consumption 6W W 8W W W 6W 6W W W V W V 0W V W V W V 0W V W V W V 0W V W No KJSB type approx. 60 flashes per minute.

44 Wire exit hole ø -ø7 White 7 Outer Contact Wire Rush Current 00mA 7 KJB-0-RYG 8 86 Color R: Y: Amber G: B: Blue Top to bottom 0: V DC 0: 00V AC 0: 0V AC KJ / KJB KJ / KJB KJ / KJB Cube Tower 6 Height Height Light: 8 Lights: 90 Lights: 9 Lights: 00 8dB at m (KJB type) Electronic Sound 6 IP Light-weight Cube Tower featuring built-in buzzer suitable for various indoor applications. Integral Rotating Parabolic Reflector: For enhanced visibility from a distance. Flashing Cycle: 0 times/min. Built-in : Adjustable intermittent buzzer volume up to 8dB at m. Installation: Upright only. Main Body: Impact and heat resistant ABS resin. Lens: Superior weather resistant and light translucent AS resin. Spare : Included. Available Colors:, Amber,, Blue. Available by Special Order CE Compliance. Wiring Diagram KJ/KJB (V DC) Outer Contact Blue + White KJ type Number of stacks KJ/KJB-0 Light KJ/KJB-0 KJ/KJB-0 KJ/KJB-0 Lights KJ/KJB-0 KJ/KJB-0 KJ/KJB-0 Lights KJ/KJB-0 KJ/KJB-0 KJ/KJB-0 Lights KJ/KJB-0 KJ/KJB-0 G8 BAS 6 KJ/KJB (00V AC, 0V AC) Signal Wire Rush Current Outer Contact Wire Current Capacity Current V DC 0.A.6A More than A 60mA 00V AC/0V AC Consumption V DC.W 00V AC 6W 0V AC.W V DC.W 00V AC 0V AC V DC 7.W 00V AC 0V AC V DC 9.W 00V AC 0V AC V 0W V W V 0W No. 0 0 W V W 9.9W V 0W 0 6W V W.W V 0W 0 W V W 8.7W KJB type approx. 0 flashes per minute. COM Current consumption and contact capactiy per module Blue White KJ-0/0 are voltage contact type (there are no alarm signal wires). KJ does not have gray wires. How to order Type B: With audible alarm Stack ~

45 Approx. 00mm from cord exit hole 6 6. CLB type Lens Color Operating Range Current Consumption (ma) Rated Temperature Range Relative Humidity Housing Material Protection Rating Illuminance at 0cm (lx) Mounting Direction Vibration Resistance Agency Approval R () CLB-N- Y C (Amber) (White) CLB Light Bar R () CLB-N- V DC (No polarity) V DC ± V -0? ~ +60? Less than 90% RH (Without Dew) Polycarbonate IP Indoor, Horizontal, Vertical (Up or Down) 9.6m/s CE / RoHS IP Y C (Amber) (White) R () CLB-N- Y C (Amber) (White) CLB CLF CLF Light Bar CLF0--C CLF0--C CLF0--R CLF0--R CLF0--Y Vertical mounting IP67 CLF0--Y High power,700lx illumination* for precise work operation. Water and dustproof IP67 construction. Steady Light Source. The light emitted from the unit does not contain infrared or UV rays, which radiate heat and damage materials. Stable operation -0 C to +60 C. * Luminous intensity at 0cm (CLF0--C) Specifications of red color type and yellow color type may be different from those of white color type Clear/White Machine tool, control panel applications CLF type Semiconductor manufacturing machinery, tester, etc. Semiconductor manufacturing machinery, cleanroom environment, etc. Long life lighting with lower power consumption and less heat generation than conventional fluorescent lamps. High illumination in a compact body. Super bright s are maintenance-free, providing long service life and lower power consumption and heat. Rated voltage: V DC (No polarity). Luminous Intensity: 00lux at 0cm. Housing is made of heat and shock resistant polycarbonate. Available in Clear/White,, Amber. How to order CLB-N-R R: Y: Amber C: Clear/White N: 00mm long N: 00mm long N: mm long CLF (0.)? CLF0-?? Approx. 0 Approx. 0 (0.)? Approx. 0 Approx (8) CLF0- CLF0- color R Y C R Y C Rated voltage Operating voltage range V DC (No polarity) Rated voltage ±0% consumption.w W Light source High intensity High intensity 8 Luminous intensity at optical center (lx at 0cm) ,700 Main body Housing: Aluminum Cover: Polycarbonate Operating temperature range -0 C ~ +60 C (No condensation 90% RH or less) Installation Protection rating Indoor, Forward Direction IP67 R CLB-N: 6 CLB-N: 6 CLB-N: 78 CLB-N: 00 CLB-N: 00 CLB-N: Luminous section CLB-N: CLB-N: CLB-N: 6 CLB-N: ± CLB-N: ± CLB-N: 67± Mounting dimensions? 0 -M*? 0 -M* Vibration resistance 0g±0g 9.6m/s g±0g 7. Mounting Screw (M)? 8. Cord exit hole (Unit: mm). 0. * When mounting with supplied nuts :?. (Unit : mm) g ± 0% 60g ± 0% 86g ± 0% 87 88

46 lux at m Illuminance Distribution Distance (m) Relative Emission Intensity (a.u.) CLM Work Light ø8 IP67f Measurement Condition: IFP=0mA, Ta=? Wavelength (nm) Temperature Range 00cd.0W -? to +60? (center) CLM CLE CLE Work Light ø7 IP6f Wide Spot Type CLE- Enhanced Illumination: Use of ultra-bright s. Extended product life even in harsh environment. Energy-Efficient: Low power consumption and less heat build-up. Installation: Upright, inverted, sideways. Enhanced Illumination: super-bright white s. Installation: Direct mount with screw, or point angle-mount. Mounting Parts: Corrosion resistant stainless steel bracket and mounting screws. Main Body: Impact resistant robust aluminum alloy body. Glass: Impact resistant tempered glass. Spectra (8) (60) CLE type CLM type Consumption Luminosity CLE- V DC W 0cd 0.kg 0 (7) Consumption Intensity Level 60 ø7 CLE-N V DC W 0cd 0.kg ø8 Narrow Spot Type CLE-N Work Light designed for applications for machine tool, inspection and processing industries. Super bright work light with resistance to weather, dust, oil and water. -ø6. CLM- V DC (no polarity) ø7 0± (97.) 00 from wire exit Length of power wire: 0mm from the slot 89 90

47 Voice & Sound 9 LAS LAS Warning Light Water- Vibration- V V proof Compatible Water-proof: JIS D 00SI-99 Vibration-proof: 70m/s JIS D Super bright, compact energy-saving auxiliary warning light designed for emergency vehicles to ensure safety. Enhanced Illumination: Use of super bright with optimized special lens design for highest illumination and wide emission. Improved Visibility: From front and sides. Lighting Pattern: 0 built-in patterns and multiple units can be flashed synchro nously. Installation: Direct mount with L-angle bracket. Available Colors:, Amber, Blue. Light Source Super bright Inner lens LAS type Rated Operating voltage range Flashing pattem Current consumption Operating temperature range LAS-M V / V DC 9. ~ 0.0V DC 0 patterns 60 ± 90mA (at V DC) / Amber 90 ± 0mA (at V DC) 80 ± 0mA (at V DC) Blue 70 ± 0mA (at V DC) -0? ~ +80? approx. 0.kg Operating temperature range is -0?~+0? when all lit-up

48 BD-C type GROUP CH CH CH CH A Beep (slow intermittent horn) Stutter (rapid intermittent horn) Bell (clear highpitched bell) Yelp (rapid siren) B C D E F G H I J K L M N O P Rapid Hi-Lo Stutter (rapid intermittent horn) Bell (clear highpitched bell) Can't Take My Eyes off of You How to order : V DC 00: 00V/0V AC Melody Synthesized Melody Top of the World The Entertainer Amazing Grace Amairono Kamino Otome Les Champs-Elysees Canon Rara Sanshain Uchuusenkan Yamato Oshiete Makenaide Gonna Fly Now (Theme for "Rocky") I Don't Want to Miss a Thing Yozorano Mukou Aiwa Katsu Truth Gattsudaze Odoru Ponpokorin Imasugu Kisu Mi Haruyo Koi Les Champs-Elysees Truth Canon Gattsudaze Rara Sanshain Uchuusenkan Yamato BD-A-J Synthesized Piano Stutter (rapid intermittent horn) Bell (clear highpitched bell) Stutter (rapid intermittent horn) Bell (clear highpitched bell) Mounting hardware Sound Type A: A Type C: C Type D: D Type Odoru Ponpokorin Color J: Ivory White K: Dark Synthesized Bell Synthesized Melody Synthesized Melody Imasugu Kisu Mi BD BD BD Audible Movable range of front cover Sound selection charts V only 90dB at m Sounds 80 IP The BD series has a melody, chime and alarm capability, variable audible control, and a compact but loud speaker. Maximum output level of 90dB at m is suitable for use in a noisy factory. sounds are pre-recorded in one unit which can be used for various applications. Sound output level and sound group can be selected by rotary switches stored behind the front panel for easier operation even after installation. Select one sound group from A to P to playback pre-recorded sounds. A new sound group can be created from the sounds by using an optional memory card (Sold separately). RoHS compliant. Available by Special Order Binary input controlled sound playback type (C0090). Rotary switch for melody group selection Pending Maximum output level of 90dB at m Memory card slot Volume control BD type BD-00 V/V DC 00V / 0V AC 0/60Hz Operating Range 0.8 ~ 6.V DC 00V±0% AC / 0V±0% AC Consumption Max. W Max. 6W Volume Input System Input Signal Time Boot up Time Channel Recorded Sound Sound Group BD- Max. 90dB at m (when flush mount), volume level adjustable Volume may be less, depending on sound type and operating conditions bit input Continuous For input voltage: s or less For channel signal: 70ms or less channels alarms and melodies 6 patterns (A to P) Operating Temperature Range Relative Humidity -0? ~ 0? 8% RH or less (No condensation) Protection Rating IP (when flush mount, front direction only) Vibration Resistance 9.6m/s 0g±0% g±0% BD-A type GROUP A B C D E F G H I J K L M N O P CH Beep (slow intermittent horn) Stutter (rapid intermittent horn) Bell (clear highpitched bell) Yelp (rapid siren) Rapid Hi-Lo Stutter (rapid intermittent horn) Bell (clear highpitched bell) Fur Elise Minuet London Bridge is Falling Down Mary Had a Little Lamb Kuck kuck On the Bridge of Avignon Amaryllis Itsy Bitsy Spider Jeux Interdits Grandfather's Clock Holdiridia Mary Had a Little Lamb Camptown Races BD-D type CH CH CH Melody Synthesized Melody Maiden's Prayer Annie Laurie Holdiridia Camptown Races Der Schmied im Walde Daydream Believer Mozart Symphony No. 0 Ich bin ein Musikante Katuscha Ave Maria Ich bin ein Musikante Jeux Interdits Kuck kuck Synthesized Piano Stutter (rapid intermittent horn) Bell (clear highpitched bell) Stutter (rapid intermittent horn) Bell (clear highpitched bell) Katuscha Synthesized Bell Synthesized Melody Synthesized Melody Grandfather's Clock GROUP CH CH CH CH A Beep (slow intermittent horn) Stutter (rapid intermittent horn) Bell (clear highpitched bell) Yelp (rapid siren) B Rapid Hi-Lo Melody Synthesized Piano Synthesized Bell C Runner Mamotte Agetai D Oribiao Kikinagara A September E Doyoubino Koibito Akino Kehai F Saafu Tengoku Sukii Tengoku Iro Howaitoburendo G Hi Ho Bear Song H Konnako Irukana Rudolph the -nosed Reindeer I Oh My Darling Clementine Yankee Doodle J Runner Mamotte Agetai Oribiao Kikinagara A September K Doyoubino Koibito Hi Ho Saafu Tengoku Sukii Tengoku Iro Howaitoburendo L Happy Birthday OKonnako Irukana I've been working on the Railroad Bear Song M Toys Go Cha Cha Cha Konnako Irukana Wiegenlied Rudolph the -nosed Reindeer N She Wore a Ribbon Oh My Darling Clementine Rose of Texas Yankee Doodle O When the Saints Go Marching In Londonderry Air Runner Mamotte Agetai P Hi Ho I've been working on the Railroad Yankee Doodle When the Saints Go Marching In Factory default setting Can be programmed with optional SD Card (SDV-8P/sold separately)

49 MODEL 6 MADE IN JAPAN CH CH COM Volume Max. 80dB at m Max. 8dB at m Max. 8dB at m Max. 90dB at m Max. 7dB at m Max. 80dB at m Terminal Outer Contact Capacity More than 00mA Min. 7. Operating Temperature Range -0 C~+60 C Humidity 8% or less. ø0. Max..0 Max. panel thickness: 7 Auxiliary Input Channel contact 9 96 Protection IP 0.kg BM BM BM Signal Horn BUZZER 90dB at m (BM-H type) (BM type: 8dB at m, BM-D type: 80dB at m) Wiring Diagram channels CH CH COM ø0 IP (BM-D Type:Front only) A V NPN/PNP Open collector BM-D Reverse Side View Channel priority CH>CH CH has priority when CH and CH are activated simultaneously. Compact Signal Horn designed for integrated applications with control panels, switchboards and production equipments. Built-in : Audible sound up to 90dB at m *. Sound Pattern: Selectable patterns of alarm sound. Body: Compact and light weight (00g). NPN/PNP Compatible: V type only. CE Compliant: For V AC/DC only. * BM-H type only BM type Application Examples Standard type Rated Range BM-0 V AC/DC AC/DC V~6V BM-0 00V AC 90V~0V AC Consumption 0.W.W BM-0 0V AC 00V~0V AC BM-0H V AC/DC V~6V AC/DC.W 0.W High volume type BM-0H 00V AC 90V~0V AC.W BM-0H 0V AC 00V~0V AC.W BM-0D V AC/DC V~6V AC/DC 0.W Drip proof type BM-0D 00V AC 90V~0V AC.W BM-0D 0V AC 00V~0V AC.W

50 Installation Wire entry hole ø0 Panel Wire entry hole ø0 Panel mm or less ø. 0 mm mm mm BT BT BT Signal Horn 6 BT-0 type 0 8dB at m ) Panel-mount Install directly to the panel enclosure with the detachable mount. Once mounted, volume control can be accessed easily from the bottom. Indoor only 8 channels 08 IP NPN Open collector embedded ( wall mount) Wall-mount Signal Horn featuring sound volume of up to 8dB at m. ADPCM 6kbit/s: High sound quality from LSI digital voice synthesizer *. Built-in : Adjustable audible sound up to 8dB at m with volume control. Sound Pattern: Up to 8 patterns. K type: 8 alarm sounds, L type: 6 melodies + chimes, BT-0 type: messages *. Installation: types types of direct panel-mount, embedded wall-mount. Compatibility: Connectable to DIN 9mm when embedded. CE Compliant: BT type V AC/DC only. * BT-0 type only. * BT-0 type only; Playback always starts from the beginning. Wiring Diagram Wiring Diagram BT-0 BT-K, L White Skyblue Pink Light green STOP COM Brown BUSY OUT Orange GND Blue AUX OUT SHIELDED WIRE V DC Skyblue Outer contact Pink Light green 6 Orange 7 8 Blue COM Brown White (V DC: ) 00mA External Amplifier + ) Panel-mount For more permanent and tamper free mount, turn the special mounting plate (patent pending) and mount the BT directly to the panel. ) Wall-mount Flush mount is used in restricted areas or for a concealed look (DIN 9mm). 0 Panel thickness must be Meets IP BT type Ch BT-K type 8 alarm sounds. A type Beep (slow intermittent horn) Stutter (rapid intermittent horn) Bell (clear high pitched bell) Yelp (rapid siren) Rapid Hi-Lo Melody Synthesized Piano Synthesized Bell S type Amaryllis Symphony No.0 Silent Lakeside Mountain Musician Romance De Amour Petrouchka BT-L type 6 melodies and chimes. Call Sign Q type Mary Had a Little Lamb The Camptown Races Cuckoo smith in the Village On the Avignon Bridge Ob-La-Di,Ob-La-Da Operating Auxiliary Input Channel AUX Output BUSY Output Max Message Time Temperature Range free -0 C~+ C Max. load contact Humidity 8% or less. V DC 00mA 6 sec. /bit Humidity 8% or less. 0.kg Rated Outer Contact Range Volume Consumption Capacity BT-0JS V AC/DC 0V~V AC, 0V~8V DC 7W/6W 0.kg BT-0KS 00V AC 90V~0V AC W 0.kg BT-0QS 0V AC 80V~0V AC W 0.kg BT-K V AC/DC 0V~6V AC, 0V~8V DC.W 0.kg Max. More than BT-00K 00V AC 90V~0V AC 0.kg W 8dB at m ma free BT-00K 00V AC 00V~0V AC -0 C~+ C 0.kg contact 8 BT-L V AC/DC 0V~6V AC, 0V~8V DC.W 8/bit BT-00L 00V AC 90V~0V AC 0.kg W BT-00L 00V AC 00V~0V AC 0.kg

51 7 0 COM 6 ETB 00~0V AC ESB Mounting Pitch 8. V AC/DC 00V AC 0 0 For panel mount application, cut square hole to 0mm. Panel thickness must be mm or less. Outer contact Open Circuit: V Closed Circuit: ma COM EB / ESB / ETB EB / ESB / ETB EB / ESB / ETB Signal Horn 9dB at m 8 channels Wiring Diagram EB 00~0V AC V AC/DC 00V AC NPN Open collector Box-type Signal Horn featuring wide range of tones and sound volume up to 9dB at m, suitable for various devices. LSI Digital Synthesizer: Original high quality clear sound. Built-in : Adjustable audible sound up to 9dB at m with volume control. Sound Pattern: 8 patterns available, (EB-L: 6 melodies + chimes, EB-K: 8 alarm sounds, ESB: alarm sound, ETB: alarm sounds). Installation: types direct or embedded* wall-mount. NPN Compatible: Direct connection to PLC (except ESB). * Mounting panel thickness ~mm Outer contact Open Circuit: V Closed Circuit: ma EB CH8>CH7>CH6>CH>CH>CH>CH>CH ETB CH>CH>CH>CH 7 8 0V AC V AC/DC 00V AC Source V AC/DC A 00V/0V AC 0.A Note:The greater number has priority when any of the channels are activated simultaneously. EB-K Comes with 8 alarm sounds. A type Ch Beep (slow intermittent horn) Stutter (rapid intermittent horn) Bell (clear high pitched bell) Yelp (rapid siren) Rapid Hi-Lo Melody Synthesized Piano Synthesized Bell EB-L Comes with 6 melodies and chimes. Ch TYPE OF SOUND S type Q type Amaryllis Symphony No.0 Mary had a Little Lamb The Camptown Races Silent Lakeside Mountain Musician Cuckoo smith in the Village 6 Romance De Amour Petrouchka On the Avignon Bridge Ob-La-Di,Ob-La-Da 7 8 Ch ESB Comes with alarm sound. ETB Comes with alarm sounds. P type Stutter B type Stutter Beep Yelp EB type Melody EB-K EB-00K EB-L EB-00L ETB-B ETB-00B ESB-P ESB-0P ESB-0P Rated V AC/DC 00/00V AC V AC/DC 00/00V AC V AC/DC 00/0V AC V AC/DC 0V AC 0V AC Range 0V~6V AC/DC 90V~0V AC 80V~0V AC 0V~6V AC/DC 90V~0V AC 80V~0V AC 0V~6V AC/DC 90V~0V AC 80V~0V AC 0V~6V DC 90V~0V AC 00V~60V AC Consumption 6W 7W 6W 7W 6W 7W W W Volume Max. 90dB at m Max. 9dB at m Max. 9dB at m Outer Contact Capacity More than ma More than 0mA More than ma Operating Temperature Range -0 C~+0 C Humidity 8% or less. -0 C~+60 C Humidity 8% or less. Auxiliary Input free contact 8/bit free contact /bit contact Channel 8 0.7kg 0.9kg 0.7kg 0.9kg 0.7kg 0.9kg 0.7kg 0.9kg

52 How to order EWH: 8 channels/bit input channels/binary input EWHS: channel : /V AC/DC 8: 8V DC 00: 00V AC 00: 00V AC EW-TB Operating Temperature Range -0 C~+60 C Humidity 8% or less. COM Outer contact EWH-A-J EW-TB-J White Brown Skyblue Pink Light green capacity (EW) Channel priority (for EW series) (Light green) > (Pink) > () > (Skyblue) The greater number has priority when any of the channels are activated simultaneously. Auxiliary Input Channel Protection 0 0 : V AC/DC 00: 00V AC 0: 0V AC EW-TB EW-00TB EW-0TB EWH: free contact 8/bit /binary EWHS: contact free contact /bit V 00V 0V 8/bit or /binary Body Color J: Ivory White Y: R : Sound type A: Type A C: Type C D: Type D Body Color J: Ivory White Y: R: IP IP6* 0.A 0.A 0.A.kg.kg.kg.kg.kg.kg * By special order EWH / EWHS / EW EWH / EWHS / EW EWH / EWHS / EW Signal Horn 0dB at m (EW-TB: 0dB at m) sounds (EW-TB: channels) IP6 (IP6 available by special order) NPN Open collector Original wide horn featuring clear and high volume up to 0dB at m, designed for use in noisy environments. sounds are pre-recorded in one unit (EWH/EWHS type). For enhanced durability and safety in the work environment. Built-in : Adjustable audible sound up to 0dB at m with volume control. Installation: Indoors upright, inverted, sideways; Outdoors upright only. (Do not install the horn facing upward). Easy Installation: With anticorrosive stainless steel mounting bracket. NPN Compatible: V type only (EWH series only). CE Compliant: V AC/DC only. Available: PNP as special order. Available by Special Order PNP open collector type. sounds are pre-recorded in one unit (EWH, EWHS) sounds are pre-recorded in one unit. sound types are available. Type A Type C Type D Beep (slow intermittent horn) Stutter (rapid intermittent horn) Bell (clear highpitched bell) Yelp (rapid siren) Rapid Hi-Lo Melody Synthesized Piano Synthesized Bell Stutter (rapid intermittent horn) Bell (clear highpitched bell) Synthesized Melody Fur Elise Maiden's Prayer Minuet Annie Laurie London Bridge is Falling Down Holdiridia Mary Had a Little Lamb Camptown Races Kuck kuck Der Schmied im Walde On the Bridge of Avignon Daydream Believer Amaryllis Mozart Symphony No. 0 Itsy Bitsy Spider Ich bin ein Musikante Jeux Interdits Katuscha Grandfather's Clock Ave Maria alarms (EW-TB) Beep (slow intermittent horn) Stutter (rapid intermittent horn) Bell (clear highpitched bell) Yelp (rapid siren) Rapid Hi-Lo Melody Synthesized Piano Synthesized Bell Stutter (rapid intermittent horn) Bell (clear highpitched bell) Synthesized Melody Can't Take My Eyes off of You Top of the World The Entertainer Amazing Grace Amairono Kamino Otome Les Champs-Elysees Canon Rara Sanshain Uchuusenkan Yamato Oshiete Makenaide Gonna Fly Now (Theme for "Rocky") I Don't Want to Miss a Thing Yozorano Mukou Aiwa Katsu Haruyo Koi Gattsudaze Odoru Ponpokorin Imasugu Kisu Mi Truth Beep (slow intermittent horn) Stutter (rapid intermittent horn) Bell (clear highpitched bell) Rapid Hi-Lo Runner Oribiao Kikinagara Saafu Tengoku Sukii Tengoku I've been working on the Railroad Wiegenlied Rose of Texas Melody Mamotte Agetai A September Iro Howaitoburendo Bear Song T-06B0 T-0709 T-0700 Rudolph the -nosed Reindeer She Wore a Ribbon Oh My Darling Clementine Yankee Doodle Synthesized Piano Doyoubino Koibito Happy Birthday Toys Go Cha Cha Cha When the Saints Go Marching In Yelp (rapid siren) Synthesized Bell Akino Kehai Hi Ho Konnako Irukana Londonderry Air Wiring Diagram EWH Signal wires for channel selection Open circuit 0V Closed circuit ma EWH / EWHS / EW type EWH EWHS EW EWH- EWH-8 EWH-00 EWH-00 EWHS- EWHS-8 EWHS-00 EWHS-00 EW-TB EW-00TB EW-0TB 00 wire COM Approx. 00mm from wire exit Signal wires (for EWH/EW series only) White Brown Skyblue Pink Light green Orange Blue Rated /V AC/DC 8V DC 00V AC 00V AC /V AC/DC 8V DC 00V AC 00V AC V AC/DC 00V AC 0V AC core cord Outer Contact Nominal sectional area : Cord type wire : 0.7mm : VCTF Signal wire : 0.mm : VCTF Range 8V~8V AC/9V~V DC V~60V DC 90V~V AC 80V~60V AC 8V~8V AC/9V~V DC V~60V DC 90V~V AC 80V~60V AC 0V~6V AC/0V~8V DC 90V~0V AC 80V~0V AC Cover Dipswitch, volume and test switch are stored under cover *EWHS/EW does not have test switch EW does not have dipswitch 86 0 Test switch (for EWH series only) Test switch is stored under cover. Switch can be used to check the operation or adjust sound volume. EWHS Consumption 8W 0W W W 8W 0W W W.W W W -?9 66 White Sound selection made by dipswitch Channel priority (for EWH series) 8 (Blue) > 7 () > 6 (Orange) > () > (Lightgreen) > (Pink) > () > (Skyblue) The greater number has priority when any of the channels are activated simultaneously. Polarity symbol of power source is for EWH and EWHS series, in /V DC and 8V DC types. Volume Max. 0dB at m Max. 0dB at m core cord Nominal sectional area : Cord type 0.7mm : VCT capacity (EWH/EWHS) EWH-/EWHS- EWH-8/EWHS-8 EWH-00/EWHS-00 EWH-00/EWHS-00 -V 8V 00V 00V A (Anti-rush) A (Normal) A (Normal) A (Normal) Outer Contact Capacity EW: More than 0mA EWH/EWHS: More than A ch EW-TB Stutter Beep Yelp

53 Vertical mount Optional Speaker (W8?) SPW-E Horizontal mount 0 0 Optional Speaker (0W8?) SPH-0EA - ø 9 - ø Optional Speaker (W6?) SPB-D PV PV PV Voice Synthesizer PV-0/ type PV-0H/H type 0 - ø DIN rail attachment 8 sec channels Editing Mixing W NPN/PNP Open collector How to order PV-0JTH Number of channels 0 type: Memory Storage type: S: Mbit T: Mbit J: V AC/DC F: Mbit K: 00V/0V AC E: 8Mbit Mountings The PV can be mounted vertically, horizontally or simply mounted to a DIN rail. Bit rate H: 8kbit/s Blank: 6kbit/s Easy Access to Memory Compartment: Simply lift memory compartment cover. High fidelity (8 Kbit/s, half recording time) or long recording ( Kbit/s) is available by changing the bit rate. Editing ROM makes many combinations without using much ROM space. Mixing function can playback music and message together. Voice Synthesizer featuring enhanced sound quality and Programmable Multi-Message Controller for original audible messages. ADPCM 8kbit/s: High sound quality from LSI digital voice synthesizer for PV-0H/H type, 6kbit/s for PV-0/ type. Recordable Messages: Editable up to 8 sec. Recordable Channels: Up to channels for PV-. Installation: Vertical and horizontal on any place such as DIN rail. Control Method: Binary* or bit input. Easy Access to Memory Compartment: Simply lift memory compartment cover. * PV- only. Library Programming Choose words from the Command Library that can be programmed into the PV's internal library. From this internal library, the commands are linked or sequenced to create messages for your application. With a maximum of channels you can store up to 8 commands in each channel. Custom Programming Give us your messages that apply to your particular application up to 8 second total program time and up to individual channels. Note: PV requires a professionally recorded message. PV type PV-0JTH PV-0KTH PV-0JFH PV-0KFH PV-JFH PV-KFH PV-JEH PV-KEH PV-0JS PV-0KS PV-0JT PV-0KT PV-0JF PV-0KF PV-JT PV-KT PV-JF PV-KF PV-JE PV-KE Range Consumption V AC/DC 0V~6V AC/DC W/W 00/0V AC 90V~0V/80V~0V AC 6W/9W V AC/DC 0V~6V AC/DC W/W 00/0V AC 90V~0V/80V~0V AC 6W/9W V AC/DC 0V~6V AC/DC W/W 00/0V AC 90V~0V/80V~0V AC 6W/9W V AC/DC 0V~6V AC/DC W/W 00/0V AC 90V~0V/80V~0V AC 6W/9W Range Consumption V AC/DC 0V~6V AC/DC W/W 00/0V AC V AC/DC 90V~0V/80V~0V AC 0V~6V AC/DC 6W/9W W/W 00/0V AC V AC/DC 90V~0V/80V~0V AC 0V~6V AC/DC 6W/9W W/W 00/0V AC V AC/DC 90V~0V/80V~0V AC 0V~6V AC/DC 6W/9W W/W 00/0V AC 90V~0V/80V~0V AC 6W/9W V AC/DC 0V~6V AC/DC W/W 00/0V AC 90V~0V/80V~0V AC 6W/9W V AC/DC 0V~6V AC/DC W/W 00/0V AC 90V~0V/80V~0V AC 6W/9W Outer Contact Capacity More than 0mA Outer Contact Capacity More than 0mA Horizontal mount Operating Auxiliary Input Temperature Range Channel -0 C~+ C Humidity 8% or less. -0 C~+ C Humidity 8% or less. / Bit 6/ Bit or 6/Binary / Bit 6/ Bit or 6/Binary 6/ Bit or /Binary Operating Auxiliary Input Channel AUX Output BUSY Output Temperature Range 6/ Bit or /Binary DIN rail Rail attachment Vertical mount Blade screwdriver Max. Output AUX Output BUSY Output Max Message Time Output Impedance 6 sec. 0.kg (Mbit ROM ) 0.77kg sec. 0.kg -0dBv Max. load (Mbit ROM ) 0.77kg W 8? 600? V DC 00mA sec. 0.kg (Mbit ROM ) 0.77kg 6 sec. 0.kg (Mbit ROM ) 0.77kg -0dBv 600? Max. load V DC 00mA Max. Output Max Message Time Output Impedance 6 sec. 0.kg (Mbit ROM ) 0.77kg sec. 0.kg (Mbit ROM ) 0.77kg 6 sec. 0.kg (Mbit ROM ) 0.77kg W 8? sec. 0.6kg (Mbit ROM ) 0.8kg 6 sec. 0.6kg (Mbi ROMt ) 0.8kg 8 sec. 0.6kg (Mbit ROM ) 0.8kg 0 0

54 90 6 Operating Temperature Range Auxiliary Input Channel 6 Protection ø66 ø. Max Message Time IP 6 sec C~+ C Humidity 8% or less. free contact /bit 0.kg 0.kg BV BV BV Signal Horn dB at m 6 channels 80 IP NPN Open collector IP Signal Horn perfect for integrated applications with control panel and production site. ADPCM 6kbit/s: High sound quality from LSI digital voice synthesizer. Built-in : Adjustable audible sound up to 80dB at m with volume control *. Sound pattern: voice messages totalling 6 sec. Playback Sound: Selected by external sound switch *. Installation: Indoors embedded wall-mount in upright, inverted, sideways; Outdoors: embedded wall mount in upright with buzzer outlet downwards. * Playback always starts from the beginning. * Control line only Wiring Diagram 00V AC /V DC 00V AC A COM BV Open Circuit:V Closed Circuit:6mA Volume control Outer contact Channel Channel priority COM CH>CH>CH>CH Note: The greater number has priority when any of the channels are activated simultaneously. BV-0CS V DC BV type BV-0KS BV-0CS Rated V DC 00/0V AC Range 0V~7V AC 90V~0V AC 80V~0V AC Consumption.W W Volume Max. 80dB at m Outer Contact Capacity More than 0mA

55 Operating Temperature Range -0 C~+60 C Humidity 8% or less. Range Auxiliary Input contact free contact Volume Consumption Max. 9dB at m Channel CT Voice Synthesizer 9dB at m 6 sec channels IP NPN Open collector Outer Contact Capacity More than ma Max Protection Message Time 6 sec. IP 0.7kg CT MV MV Voice Synthesizer MP 8dB at m 70 IP0 Compact Voice Synthesizer featuring choice of MP messages for in-vehicle and integrated applications*. *(For example: control panels, switchboards and production equipment) Audible messages up to 8dB at m. MP 6kbit/s: Clear sound quality. Sound Pattern: or messages in sec. Installation: Easy mount for indoors only. Compact Voice Synthesizer designed for vehicle-mount and outdoor applications. Audible message adjustable up to 9dB at m. Sound Pattern: messages in 6 sec. and custom made messages available *. * Continuous contact closure replays selected channel repeatedly. 0 MV type CT type MV-0CT MV-0CT Rated V~V DC Range 0V~V DC Consumption W.W Volume Max. 8dB at m Outer Contact Capacity More than 0mA 0 CT-0 Rated V~V DC 0V~0V DC 6W 70 0 MV-0CT MV-0CT Operating Temperature Range -0 C~+ C Humidity 8% or less. Auxiliary Input contact / free contact free contact Channel Max Message Time sec. 0.09kg 7 sec channels (MV-0CT) channels (MV-0CT) 80 Approx. 00mm from wire exit ø

56 Operating Temperature Range -0 C~+ C Humidity 8% or less. Operating Temperature Range -0 C~+ C Humidity 8% or less. -0dBv 600? -0dBv 600? BUSY Output Max. load V DC 00mA BUSY Output Max. load V DC 00mA 0 Max Message Time Max Message Time 0.8kg.kg 0.8kg.0kg EVB / PVB EVB / PVB EVB / PVB Voice Synthesizer RECORD&PLAY 90dB at m 60 sec (PVB type: 6 sec) channels NPN Open collector Speaker-type Voice Synthesizer featuring recordable messages * up to 60 sec. with microphone *. * PVB type: messages up to 6 sec. * EVB only. ADPCM 6kbit/s: Clear sound quality from LSI digital voice synthesizer for PVB type, kbit/s for EVB type. Recordable Messages: recordable * and editable messages up to 60 sec. * with microphones *. Installation: Panel and wall mount for indoors only. * PVB type: selectable pre-installed messages up to 6 sec. * Refer to channel priority when more than one playback input is received. * Message data can be transferred easily with optional cable EVH-K (Sold separately). EVB (Recording and Replay) PVB (Replay only) Wiring Diagram 0V AC EVB / PVB type V AC/DC 00V AC Shielded wire V DC External amplifier 00mA GND AUX OUT BUSY OUT STOP CH CH CH CH COM Mounting pitch 8. 0 For panel mount application, cut square hole to 0mm. Panel thickness must be mm or less. Source Voice: CH~CH STOP Open Circuit: Vs=0V ( ) Closed Circuit: Is=mA Is V AC/DC 0.A 00V/0V AC 0.A More than 00ms. input is required to activate the message. Channel priority STOP>CH>CH>CH>CH Note: The greater number has priority when any of the channels are activated simultaneously. COM EVB Hexagon bolt Panel thickness ~mm EVB-0JF EVB-0KF Rated V AC/DC 00/0V AC Range 0V~V AC 0V~8V DC 90V~0V AC 80V~0V AC Consumption W/9W 9W Volume Max. 90dB at m Outer Contact Capacity More than 0mA Push switch for mode select PVB-0JS PVB-0KS Rated V AC/DC 00/0V AC Range 0V~V AC 0V~8V DC 90V~0V AC 80V~0V AC Consumption 7W/W 7W Volume Max. 90dB at m Outer Contact Capacity More than 0mA Auxiliary Input Channel AUX Output free contact /bit Auxiliary Input Channel AUX Output free contact /bit 60 sec. 6 sec. Operating lamp Optional microphone Push switch for recording or start Can be mounted into the switchboard or wall. Panel thickness: ~mm Mounting pitch: 0 0mm 09 0

57 KJPV / KJT KJPV / KJT KJPV / KJT Voice Synthesizer / Melody KJPV 9dB at m KJT 9dB at m 6 IP NPN Open collector 6 Wiring Diagram KJPV Height 7 Light Light Orange Light Lead Wire CH (Skyblue) Lead Wire CH () Lead Wire CH (Pink) STOP Blue COM Brown Height Light: Lights: 7 Lights: Outer contact - ø7 Wire exit hole ø KJT 7 7 Outer contact Light Light Orange Light Lead Wire CH (Skyblue) Lead Wire CH () Lead Wire CH (Pink) Lead Wire CH (Light green) Lead Wire CH (Purple) Lead Wire CH6 () Lead Wire CH7 (White) Lead Wire CH8 (Blue) Multi-layer Revolving Warning Lights combined with integrated voice synthesizer or melody alarm for various applications. Built-in : Adjustable audible sound volume up to 9dB at m* with volume control. ADPCM 6kbit/s: High sound quality from LSI digital voice synthesizer (KJPV). Sound Pattern: messages in 6 sec. for KJPV, 8 sounds for KJT (KJT-L: 6 melodies & chimes, KJT-K: 8 alarms). and light signal units can be replayed together or separately. Installation: Upright only. Lens: Superior weather resistant and light translucent acrylic resin. Available Colors:, Amber,, Blue. * KJT type: 90dB at m White Supply KJPV 00V AC Open Circuit: V 00V AC Closed Circuit: ma Open Circuit: V V AC/DC Closed Circuit: ma CH (Light green)>ch (Pink)> CH ()>CH (Skyblue) Note: The greater number has priority when any of the channels are activated simultaneously. KJPV / KJT type COM Brown White (V DC: ) (V DC: ) V DC A 00V/0V AC A A Supply KJT 00V AC 00V AC V AC/DC Open Circuit: V Closed Circuit: ma Open Circuit: V Closed Circuit: ma CH8 (Blue)>CH7 (White)>CH6 () >CH (Purple)>CH (Light green)> CH (Pink)>CH ()>CH (Skyblue) Note: The greater number has priority when any of the channels are activated simultaneously. Note: See 0 for the Sound type Selection Chart. Ch KJT-K type 8 alarm sounds. A type Beep (slow intermittent horn) Stutter (rapid intermittent horn) Bell (clear high pitched bell) Yelp (rapid siren) Rapid Hi-Lo Melody Synthesized Piano Synthesized Bell S type Amaryllis Symphony No.0 Silent Lakeside Mountain Musician Romance De Amour Petrouchka KJT-L type 6 melodies and chimes. Call Sign Q type Mary Had a Little Lamb The camptown Races Cuckoo smith in the Village On the Avignon Bridge Ob-La-Di,Ob-La-Da Optional Mounting Bracket SZ-008 Rated Rotations per Outer Contact Operating Range Volume Auxiliary Input Channel Consumption No. Minute Capacity Temperature Range KJPV-0S V DC 0V~7V DC 0W V 0W 0 free.kg KJPV-0S 00V AC 90V~0V AC contact stack 0W V W.7kg KJPV-0S 0V AC 80V~0V AC /bit KJPV-0S V DC 0V~7V DC 0W V 0W 0 Max. -0 C~+ C free.0kg Voice More than KJPV-0S 00V AC 90V~0V AC 0 9dB Humidity contact stacks 6W V W 0mA (Up to 6 sec.).kg KJPV-0S 0V AC 80V~0V AC at m 8% or less. 6/bit KJPV-0S V DC 0V~7V DC 0W V 0W 0 free.6kg KJPV-0S 00V AC 90V~0V AC contact stacks W V W.0kg KJPV-0S 0V AC 80V~0V AC 7/bit KJT-0 V AC/DC V~7V AC/DC W/8W V 0W 0 free.kg -K: KJT-0 00V AC 90V~0V AC contact stack 0W V W 0.7kg KJT-0 00V AC 80V~0V AC 9/bit KJT-0 V AC/DC V~7V AC/DC 6W/8W V 0W 0 Max. -0 C~+0 C free.0kg -L: More than KJT-0 00V AC 90V~0V AC 90dB Humidity contact 8 stacks 6W V W 0 0mA.kg KJT-0 00V AC 80V~0V AC at m 8% or less. 0/bit Melody KJT-0 V AC/DC V~7V AC/DC 7W/8W V 0W 0 free.6kg KJT-0 00V AC 90V~0V AC contact stacks W V W 0.0kg KJT-0 00V AC 80V~0V AC /bit Special order

58 Outer contact A (V DC: ) RKPV / RKT RKPV / RKT RKPV / RKT Voice Synthesizer / Melody RKPV RKT NPN Open collector Sleek design Revolving Warning Light with voice synthesizer or alarm suitable for various applications. Built-in : Adjustable audible sound volumes up to 9dB at m* with volume control. ADPCM 6kbit/s: High sound quality from LSI digital voice synthesizer (RKPV only). Sound Pattern: RKT-L: 6 melodies & chimes, RKT-K: 8 alarms, RKPV: messages in 6 sec. and light signal units can be replayed simultaneously or separately. Extended Life: Vibration resistant automobile bulb. Installation: Indoors- Upright, inverted; Outdoors- Upright only. Dome: Superior impact and heat resistant polycarbonate resin for superior durability and light transmission. Available Colors:, Amber,, Blue. * RKT type: 90dB at m 9dB at m 9dB at m ø00 IP RKPV M Wiring Diagram Revolving Light Lead Wire CH (Skyblue) Lead Wire CH () Lead Wire CH (Pink) Lead Wire CH (Light green) STOP Blue COM Brown Supply RKPV 00V AC Open Circuit: V 00V AC Closed Circuit: ma Open Circuit: V V AC/DC Closed Circuit: ma RKPV / RKT type White ø00 Outer contact CH (Light green)>ch (Pink)>CH ()>CH (Skyblue) Note: The greater number has priority when any of the channels are activated simultaneously. 0 (V DC: ) V DC A 00V/0V AC A RKT 0 6 Wire exit hole ø ø70 ø6 Revolving Light Lead Wire CH (Skyblue) Lead Wire CH () Lead Wire CH (Pink) Lead Wire CH (Light green) Lead Wire CH (Purple) Lead Wire CH6 (Orange) Lead Wire CH7 () Lead Wire CH8 (Blue) COM Brown White Supply RKT 00V AC Open Circuit: V 00V AC Closed Circuit: ma Open Circuit: V V AC/DC Closed Circuit: ma CH8 (Blue)>CH7 ()>CH6 (Orange)>CH (Purple) >CH (Light green)>ch (Pink)>CH ()>CH (Skyblue) Note: The greater number has priority when any of the channels are activated simultaneously. Note: See 0 for the Sound type Selection Chart. Ch RKT-K type 8 alarm sounds. A type Beep (slow intermittent horn) Stutter (rapid intermittent horn) Bell (clear high pitched bell) Yelp (rapid siren) Rapid Hi-Lo Melody Synthesized Piano Synthesized Bell S type Amaryllis Symphony No.0 Silent Lakeside Mountain Musician Romance De Amour Petrouchka RKT-L type 6 melodies and chimes. Call Sign Q type Mary Had a Little Lamb The camptown Races Cuckoo smith in the Village On the Avignon Bridge Ob-La-Di,Ob-La-Da Optional Mounting Bracket SZ-008 Rated Rotations per Outer Contact Operating Max Message Range Volume Auxiliary Input Channel Consumption Minute Capacity Temperature Range Time No. RKPV-S V DC 0V~7V DC W V 0W 0 Max. -0 C~+ C free.0kg Voice RKPV-00S 00V AC 90V~0V AC 0 9dB Humidity contact 6 sec. 0W V W RKPV-0S 0V AC 00V~0V AC at m 8% or less. /bit.kg RKT-K V AC/DC 0V~7V AC/DC W/8W V 0W 0.0kg More than RKT-00K 00V AC 90V~0V AC 0W V W 0 Max. 0mA -0 C~+0 C free.kg RKT-00K 00V AC 00V~0V AC 90dB Humidity contact 8 RKT-L V AC/DC 0V~7V AC/DC W/8W V 0W 0 at m 8% or less. 9/bit.0kg RKT-00L 00V AC 90V~0V AC 0W V W 0.kg Melody RKT-00L 00V AC 00V~0V AC

59 ø9 66 Protection Protection 6 sec. IP.kg.kg.kg.kg.kg.kg.kg.kg.kg.kg.kg EVW / PVW EVW / PVW EVW / PVW Voice Synthesizer RECORD&PLAY EVW type PVW type From wire exit 00 0dB at m EVW PVW EVW PVW 60 sec 6 sec channels channels IP Built-in : Adjustable audible sound volume up to 0dB at m with volume control. ADPCM 6kbit/s: Clear sound quality from LSI digital voice synthesizer for PVW type (kbit/s for EVW type). Recordable Messages: recordable * and editable messages up to 60 sec. with microphone * (EVW). Installation: Indoors upright, inverted, sideways; Outdoors upright only. Easy Installation: With anticorrosive stainless steel mounting bracket. * Message data can be transferred easily with optional cable EVH-K (Sold separately). * Refer to channel priority when more than one replay input is received. Available by Special Order CE Compliance: PVW-**JF type. EVW type Concept of Horn Configuration. Driving unit PVW type Horn-type Voice Synthesizer featuring recordable messages up to 60 sec. * with a microphone *. * PVW-0/- type: or selectable pre-installed messages up to 6 sec. * EVW only. Conventional type New wide Horn Type New design increases volume output by changing the location of the driving unit from the back to the front. Wiring Diagram 00mA + EVW / PVW type Rated EVW-0JF /V AC/DC EVW-0KF EVW-0QF 00V AC 0V AC PVW-JF /V AC/DC PVW-DF 8V DC PVW-KF 00V AC PVW-QF 0V AC DC V White Skyblue Pink Light green STOP COM Brown BUSY OUT Orange GND Blue Shielded wire AUX OUT External amplifier Voice: CH~CH STOP ( ) Open Circuit: Vs=0V Closed Circuit: Is=mA Is COM Brown Source V A V 0.A 00V 0.A 0V 0.A More than 00ms.input is required to activate the message. Channel priority STOP () >CH (Light green) >CH (Pink) >CH () >CH (Skyblue) Note: The greater number has priority when any of the channels are activated simultaneously. Range 8~8V AC 9~VDC 90V~V AC 80V~70V AC Rated Range PVW-0JF /V AC/DC 8~8V AC PVW-0DF 8V DC V~60V DC PVW-0KF 00V AC 90V~V AC PVW-0QF 0V AC 80V~60V AC Consumption 0W/9W 8W 8W 9~V DC W 8~8V AC 9~V DC V~60V DC 90V~V AC 80V~60V AC 0W 8W 8W W 0W 8W 8W Volume Max. 0dB at m Volume Consumption Max. 0dB at m Outer Contact Capacity More than 0mA Outer Contact Capacity More than 0mA Operating Temperature Range -0 C~+ C Humidity 8% or less. Operating Temperature Range -0 C~+ C Humidity 8% or less. Auxiliary Input Channel AUX Output BUSY Output free contact /bit free contact /binary Max Message Time -0dBv Max. load 600? V DC 00mA 60 sec. IP Auxiliary Input Channel AUX Output BUSY Output free contact /bit -0dBv 600? Max. load V DC 00mA Max Message Time

60 Front - ø9 Wire exit hole ø ø0 RT RT RT Voice Synthesizer Ch 0dB at m IP NPN Open collector Large horn with revolving warning light featuring clear sound up to 0dB at m. Built-in : Adjustable audible sound volumes up to 0dB at m with volume control. ADPCM 6kbit/s: High sound quality from LSI digital voice synthesizer (RT-VS only)*. Installation: Upright only. Dome: Superior weather resistant and light translucent acrylic resin. Available Colors:, Amber,, Blue. * RT-VS requires a professionally recorded message. Available by Special Order Cabtire Cable: Versatile and flexible m cable. IP6. CE Compliance. 0V AC RT-K type 8 alarm sounds. A type Beep (slow intermittent horn) Stutter (rapid intermittent horn) Bell (clear high pitched bell) Yelp (rapid siren) Rapid Hi-Lo Melody Synthesized Piano Synthesized Bell S type Amaryllis Symphony No.0 Silent Lakeside Mountain Musician Romance De Amour Petrouchka RT-L type 6 melodies and chimes. Call Sign Q type Mary Had a Little Lamb The Camptown Races Cuckoo smith in the Village On the Avignon Bridge Ob-La-Di,Ob-La-Da Concept of Horn Configuration. 0dB at m 0dB at m Optional Mounting Bracket SZ-008 Wiring Diagram RT-VS RT-K,-L RT type Revolving Light Lead CH (Skyblue) Lead CH () Lead CH (Pink) Lead CH (Light green) STOP Blue COM Brown Revolving Light Lead CH (Skyblue) Lead CH () Lead CH (Pink) Lead CH (Light green) Lead CH (Purple) Lead CH6 (Orange) Lead CH7 () Lead CH7 (Blue) COM Brown White White Outer contact V DC A 00V/0V AC A Outer contact Supply 00V AC 00V AC V AC/DC CH (Light green)>ch (Pink)> CH ()>CH (Skyblue) Note: The greater number has priority when any of the channels are activated simultaneously. (V DC: ) RT-VS Open Circuit: V Closed Circuit: ma Open Circuit: V Closed Circuit: ma *more than 00ms input is required to activate. Supply RT-K,L 00V AC Open Circuit: V 00V AC Closed Circuit: ma Open Circuit: V V AC/DC Closed Circuit: ma CH8 (Blue)>CH7 ()>CH6 (Orange) >CH (Purple)>CH (Light green)> CH (Pink)>CH ()>CH (Skyblue) Note: The greater number has priority when any of the channels are activated simultaneously. (V DC: ) A Note: See 0 for the Sound type Selection Chart. How to order : V AC/DC 00: 00V AC 0: 0V AC (RT-VS) 00: 00V AC (RT-K,-L) Sound VS: Voice Synthesizer K: L: Melody RT-L-F-R Color R: Y: Amber G: B: Blue Type of sound Only RT-K,-L Rated Rotations per Outer Contact Operating Max Message Range Volume Auxiliary Input Channel Consumption Minute Capacity Temperature Range Time No. RT-VS V AC/DC 0V~7V AC/DC 6W V 0W -0 C~+ C free.0kg Voice RT-00VS 00V AC 90V~0V AC 0 Humidity contact 6 sec. 0W V W RT-0VS 0V AC 80V~0V AC 8% or less. /bit.kg RT-K V AC/DC V~7V AC/DC W/W V 0W Max..0kg More than RT-00K 00V AC 90V~0V AC 0dB W V W 0 0mA at m -0 C~+0 C free.kg RT-00K 00V AC 80V~0V AC Humidity contact 8 RT-L V AC/DC V~7V AC/DC W/W V 0W 8% or less. 9/bit.0kg RT-00L 00V AC 90V~0V AC W V W 0.kg Melody RT-00L 00V AC 80V~0V AC

61 6 6 SZ-007 SZ-008 SZ-0 Pole is not included SZ-0 Pole is not included SZ-08 SZ-08 R0 ø Ground hole - ø. R0. ø7. ø0 ø0 ø70 6- ø6-6 ø0 ø70 ø0 ø0 ø ø6 ø ø Material For SZ-00 ABS resin SZ-0 SZ-00C SZ-00M SZ-007 SZ Electro-galvanized steel ø ø ø0 ø0. - ø6 6- ø ø9 Ground screw M Hexagon nut - ø LU, LU7, LME, LMS, RUP, STD LC, LCS, LE, LES-A LCE LME LU7, LHE-A Pitch diameterø0, Pitch diameter ø0,70,0,0 and Optional Parts Optional Parts Optional Parts Mounting Pole SZ-60L SZ-80L 0 87 ø0 (ø0) ø0 (ø0) ø60 ø70 ø8 SZ-60T 9 ø0 SZ-70L 7 86 ø60 8 SZ-0L ø70 SZ-0T ø70 SZ-0L 00 ø8 SZ-0T ø8 Wall mount bracket Bracket is detachable from machinery by loosening a screw and taking off the connectors. Bracket can be removed or installed upside-down during transportation. Wiring should not be exposed. Silver color type: available with special order. Before After M7 Includes SZ-0 ( ): SZ-80L M M M Includes SZ-0 Includes SZ-0 Includes SZ-0 Includes SZ-00 Includes SZ-0 Includes SZ-00 How to install Material Upper bracket Pole L Bracket Cord bushing Circular SZ-80L ABS resin SPHC 6/6 nylon LCE-W SZ-0L ADC SZ-60L Carbon SPHC 6/6 nylon LE-W SZ-0T ADC SZ-60T steel pipe ADC LES-AW SZ-0L ABS resin SZ-70L ABS resin SPHC EPT LME-W SZ-0T ADC Aluminum alloy die-cast SPHC Hot rolled mild (sheet) steel EPT Ethylene propylene rubber For Material Upper bracket Pole L Bracket Cord bushing Circular Carbon steel pipe SPHC EPT ADC SPHC EPT ADC For LU7 LHE-A RLE, RU RH, PS PES, SKH Drill a hole on the mounting surface of machinery. Fix a mounting part and connector on the hole. SZ-00 (For ø.7mm pole) SZ-0 (For ø7.mm pole) Join the connectors. Hook the mounting bracket to the metal part by tightening with a screw. Mounting Bracket SZ-00 (For ø.7mm pole) SZ-0 (For ø7.mm pole) SZ-0 SZ-06A (For ø.7mm pole) SZ-00 SZ-0 Pole bottom line ø00±0. Material ø7 Aluminum alloy die-cast Pole bottom line For ø9 STD, RUP, LME, LMS, LHE LCE, LCS, LE, LES-A -. 8 ø7 Rubber Gasket Tripod stand SZ-00A SZ SZ-0 SZ-06A -. 7 Pitch diameter ø7 ø7 ø ø90 Material Cold rolled mild steel - ø Pitch diameter ø0 - ø. Pitch diameter ø - ø. Pitch diameter ø0 0 Aluminum alloy die-cast For LE, LES-A ø68 - ø ø LU, LU7, STD, RUP, LME, LMS, LHE SZ-07 (For ø.7mm pole) Mounting dimensions M ø. ø0 - ø Wire connector (SZ-00-00) sold separately Max.mounting hole size (ø0) SZ-00C 0 ø0 - R - ø SZ-009 ø R ø - ø ø00 ø8 6 ø0~ø0 ø0 SZ-00M 0 - ø ø0 Material For 7 ø 80 SZ-00A SZ-0 KX, RH(B) Ethylene propylene rubber RU, RLE, PS(F), PSX, PES SZ-009 For Height SZ-009 Pitch diameter ø0~ø0,8~,8mm - R - ø SZ-0 SZ-0 SZ-07 SZ-08 SZ-08 Hot rolled mild steel Aluminum alloy die-cast PBT/ABS resin LCE, LCS, LE, LES LME, STP, ME, MP LME, STD, RUP LU7, LHE LME 9 0

62 Wire Wire 0A Orange Wire ) For continuous & alarm ) Outer contact for lighting V Common wire for flashing (Brown) Common wire for continuous lighting () source wire () source wire () Lead wire color correspondence table Style Lights Lights Lights Lights Transistor Capacity Color of Lead wire O R G O R B G O R W B G O R A and Amperage of lead wire per layer Signal Line Incandescent bulb Type Signal Line Current Current Rush Current Signal Line Current Rush Current V AC/DC V AC/DC 00mA.6A 0mA 0mA 00V AC 00V AC 00mA A ma 0mA 00~0V AC 0V AC 0mA 0.A ma 0mA TRIAC Capacity Current Capacity ) V AC MP/MPS Transistor (NPN/PNP) Ic 0mA Vc V IL<0.mA WM STD 00~00V AC Io A Replacement s Replacement s No. Wattage Part No. No. Wattage Part No. Vibration Endurance 9 8VW D080 VW D VW D00 VW D000 RP/BAS T0/BAD 0VW D00 8VW D0800 VW D V0W D0000A VW D000 RP/BAD S/BAS 8 6VW D V0W D0000A VW D V0W D0000A 8V0W D08000 V70W D G8/BAS VW D0000A T0/BAS 0V0W D000006A ME/MES/MP/MPS/STD/WM Wiring Diagram [ME/MES/MP/MPS ] DC V: NPN(PNP)Transistor R,O,G,B,C R A Orange G B Blue C White (NPN Transistor) [STD ] A STD(Continuous lighting type) () (Orange) () (Blue) Rated ME-A/MES-A Signal Line Signal Line Current Color of unit Continuous Amber V DC V AC V DC V AC R,Y: ma G,B,C: 0mA Blue (MP/MPS only) (MP/MPS only) Clear A For continuous light Continuous Supply + V DC MP/MPS has no polarity. (ME/MES: positive(+) on yellow) STD-F V type (PNP Transistor) MP/MPS only A + V DC R, O, G, B, C () (Orange) () (Blue) For continuous light For flashing Continuous Transistor Capacity ME/MES Current Capacity Withstand Current Leakage STD-F 00V/0V/00~0V type () (Orange) () (Blue) ME/MES MP/MPS Transistor (NPN) Ic 0.A Vc V IL<0.mA For continuous light For flashing 0V0W D00006A 0V0W D00006A 6 0VW D0006A 6 0V0W D00006 Common () Amperage rating for the fuse Type V AC/DC 00~0V AC Amperage rating A A ) Common wire for flashing (Brown) source wire () source wire () T0/E G/BA9S 7 0VW D0006A 8 V6W D V6W D VW D VW D VW D VW D V0.A D0/07 T0/E Vibration Endurance T0/BAD Vibration Endurance 0 8V0W D0800 0V0W D000 0V0W D000 [WM-ccc(FB) ] WM DC type For continuous light Orange ) V V: NPN(PNP)Transistor WM-FB Orange Skyblue Flashing Flashing Com Brown AC type Skyblue Wire Outer contact for lighting Wire Orange Wire Wire Skyblue Wire T0/E0 8 V0.A D0/07 T0/BAD RP/BAD 6 0V0W D V0W D V0W D0000 G8/BAS VW D000 V0W D0000 Flashing Com Brown Outer contact for flashing + ) V Flashing Com Brown Outer contact for flashing Current Withstand + ) V Transistor (NPN or PNP) WM Ic A Vc V Withstand Current Leakage Io A Vo 0V Vo 0V I 6mA Continuous signal has priority when continuous signal and Flashing signal are activated simultaneonsly. Never connect wire to Flashing common wire. This diagram shows NPN diagram. In case of PNP, please connect in reverse order as of NPN.

63 For flashing Current Leak IL ma Continuous Flashing g Lead wire color correspondence table Color of unit Color of Lead wire Amber Orange Blue Blue Clear White LE type: All light wires are supplied even if all colors are not used. Color of Lead wire Purple Skyblue wires do not exist for continuous only model. g for outer contact protection All voltage types A 00/0V AC NPN Transistor g Continuous only For Continuous light, R, A Orange, G, B Blue, C White Continuous COM ) A g Continuous and Flashing with For Continuous light and alarm, R LE LES LHE, A Orange, G, B Blue, C White Purple Sky Blue Continuous COM Flashing COM Brown A For flashing ) LCE/LCS Wiring Diagram (LCE/LCS-ccc(FB)(W)(K) ) LCE/LCS [Continuous only] g V AC/DC, R, A Orange, G, B Blue, C White NPN(PNP) Transistor V DC NPN Transistor g Continuous only, R, A Orange, G, B Blue, C White, R, A Orange, G, B Blue, C White Purple Skyblue wire g V AC/DC, R, A Orange, G, B Blue, C White Purple Skyblue A V DC For continuous light g Continuous and Flashing with For continuous light and alarm supplly A V DC A For continuous light For flashing LCE [Continuous and Flashing with ] For continuous & alarm g 90~0V AC, R, A Orange, G, B Blue, C White Continuos COM Ground wire and striped g 90~0V AC, R, A Orange, G, B Blue, C White Purple Skyblue Continuous COM Flashing COM Brown Flashing COM Brown A Ground wire A and striped g Signal line voltage and current per module Rated Signal Line Signal Line Current Signal Line Inrush R,A G,B,C Current Current LCE/LCS V AC/DC AC/DC V 0mA ma 0mA 0mA LCE-M 90~0V AC V DC 0mA ma 0mA 0mA V DC PNP Transistor g Continuous only Wire, R, A Orange, G, B Blue, C White Wire, R, A Orange, G, B Blue, C White Purple Skyblue Flashing COM Brown V DC A For continuous light g Continuous and Flashing with V DC A A For continuous light For flashing For continuous & alarm For continuous light and alarm g Lead wire color correspondence table Color of unit Amber Blue Clear All voltage types Color of Lead wire Orange Blue White Color of Lead wire Purple Skyblue g for outer contact protection A 90~0V AC NPN Transistor g Continuous only, R, A Orange, G, B Blue, C White Continuous COM Ground wire and striped g Continuous and Flashing with For continuous light and alarm, R, A Orange, G, B Blue, C White Purple Skyblue Continuous COM LCS LCE A For continuous light ) For flashing LES/LE/LHE Wiring Diagram g LES/LE/LHE /V AC/DC (LES:V type only) g LE/LHE 00/0V AC Continuous, R, R, A Orange, A Orange, G, G, B Blue, B Blue, C White, C White (LHE: ) A g LE/LHE-FB /V AC/DC g LE/LHE-FB 00/0V AC (LE-ccc(FB)(W)(P) ) Purple Skyblue Flashing COM Brown (LHE:) NPN(PNP) Transistor V DC NPN Transistor g Continuous only A Continuous Flashing For Continuous light, R, A Orange, G, B Blue, C White A V DC g Continuous and Flashing with For Continuous light and alarm, R, R, A Orange, G, B Blue, C White, A Orange, G, B Blue, C White Purple Skyblue wire Supply A V DC Purple Skyblue Flashing COM Brown Continuous COM g Signal line voltage and current per module Signal Line Signal Line Current LE V AC/DC V AC/DC R, A: 0mA G, C: 0mA B: ma LHE-A R, A: 0mA G, C, B: 0mA V AC/DC V AC/DC LES/LE R, A: ma G, C: 0mA B: ma LHE-A R, A: 0mA G, C, B: 0mA 00V,0V AC V DC LE R, A: ma G, C: 0mA B: ma V DC PNP Transistor g Continuous only, R, A Orange, G, B Blue, C White wire, R, A Orange, G, B Blue, C White Continuous A A Supply For Continuous light V DC g Continuous and Flashing with Supply For Continuous light wire A V DC, B Blue, C White Purple Skyblue Flashing COM Brown, R, A Orange, G A Signal Line Current 0mA Rush Current 0mA Flashing COM Brown Flashing COM Brown For flashing Current Capacity For flashing Transistor (NPN or PNP) Ic 00mA ( UNIT) Ic 00mA () Withstand Current Leak Vc V IL ma For flashing Flashing COM Brown Ground wire and striped A ) LES LE LHE Transistor NPN or PNP Current Capacity Ic 00mA ( UNIT) Ic 00mA () Ic 0mA ( UNIT) Withstand Vc V Vc 0V

64 Rated V AC/DC 00V AC 0V AC Signal Line V AC/DC V AC g PNP LGE R A G B C Signal Line Current 90mA Continuous COM, R, A Orange, G, B Blue, C Light green LGE Signal Line Inrush Current Current 0mA White White 0mA For continuous lighting LGE ) + V Outer contact for continuous lighting Outer contact for flashing + ) V 6 LME/LMS Wiring Diagram (LCE/LCS-ccc(FB)(W)(K) [LME/LMS-ccc(FB)(W)(L)(K) ) ] LME( W)/LME( W)-S Q/LMS [Continuous type] g V AC/DC g 00/0V AC (LME only), R, A Orange, G, B Blue, C White g V AC/DC, R, A Orange, G, B Blue, C White Purple Skyblue Flashing COM Brown For continuous light A For flashing, R, A Orange, G, B Blue, C White Continuous Com LME-FB(W)/LME( W)-S Q [Continuous/Flashing/ type] g 00/0V AC (LME only) Continuous &Buzzer, R, A Orange, G, B Blue, C White Purple Skyblue Continuous COM Flashing COM Brown For continuous light A A A LME-FB-S/Q Series: V model is DC only, with only one polarity: positive (+) on (NPN) g Signal line voltage and current per module Rated Signal line Signal Line Current Signal Line R,A G,B,C Current V AC/DC V AC/DC LME 00V AC V DC 0mA 0V AC 0mA 0mA V DC LME-S 00V AC V DC 0mA 0V AC Buzzer Inrush Current 0mA For flashing Continuous &Buzzer g Lead wire color correspondence table Color of unit Amber Blue Clear g LME-S/Q Color of unit S Amber S Blue S7 Amber Blue Q Amber Blue Q Amber Clear Q Amber Blue Clear All voltage types LME LMS Color of Lead wire Orange Blue White Color of Lead wire Orange Blue Orange Blue Orange Blue Orange White Orange Blue White Color of Lead wire Purple Skyblue g for outer contact protection A LGE Wiring Diagram [LGE-ccc(FB) (LE-ccc(FB)(W)(P) ] ) R A G B C g Continuous signal has priority when Continuous signal and Flashing signal are activated simultaneously. g NPN LGE R A G B C, R, A Orange, G, B Blue, C Light green Skyblue Continuous Continuous COM Flashing COM Brown White DC V: NPN(PNP)Transistor, R, A Orange, G, B Blue, C Light green Continuous COM For continuous lighting For flashing ) + V g Signal line voltage and current per module NPN(PNP)Transisitor V DC NPN Transistor g Continuous only For fontinuous light, R, A Orange, G, B Blue, C White A V DC g Continuous and Flashing with For fontinuous light and alarm, R, A Orange, G, B Blue, C White Purple Skyblue Flashing COM Brown Current Capacity A V DC For flashing Transistor (NPN or PNP) Ic 00mA ( UNIT) Ic 00mA (Buzzer) DCV PNP Transistor(except for S/Q type) g Continuous only wire A, R VDC, A Orange, G, B Blue, C White For flashing For fontinuous light g Continuous and Flashing with For fontinuous wire light and alarm A, R V DC, A Orange, G, B Blue, C White Purple Skyblue Flashing COM Brown Current Leakage Vc? V IL ma AC00/0V NPN Transistor g Continuous only For fontinuous light, R, A Orange, G, B Blue, C White Continuous COM ) A g Continuous and Flashing with For fontinuous light and alarm, R, A Orange, G, B Blue, C White Purple Skyblue Continuous COM Flashing COM Brown A For flashing ) LGE-FB R A G B C g rate type Rated current White Buzzer Sky blue, R, A Orange, G, B Blue, C Light green Continuous COM Flashing COM Brown White LGE All types Miniature glass tube fuse ø 0mm A ) + V Outer contact for continuous lighting Outer contact for flashing ) + V g Transistor Capacity (NPN/PNP) LGE Current Capacity LGE-FB R A G B C Ic 0.A ( unit) Ic 0.A () Vc V Buzzer Sky blue, R, A Orange, G, B Blue, C Light green Continuous COM Flashing COM Brown

65 Rated Lights - Lights - - Signal Line V AC/DC V AC/DC PNP Transistor Continuous light Vc V Orange Blue White Wire color Purple Skyblue Signal Line Current R,A G,B,C 0mA Orange Blue White Purple Skyblue Flashing COM Brown ma V DC WEP/WE Sound Short pips Long beeps Signal Line Current Continuous or flashing light with audible alarm V DC Continuous COM 0mA Inrush Current 0mA For continuous light 7 8 For continuous light and alarm SE-D Wiring Diagram WEP/ WE Wiring Diagram SE-D [Continuous type] g V AC/DC SE-D [Flashing type] g V AC/DC [SE(F)(B)(W)-cccD ], R, A Orange, G, B Blue, C White g 00/0V AC A, R, A Orange, G, B Blue, C White Purple Skyblue Brown Flashing COM (SEF) (SEF) Continuous For continuous light *SEB type: Without Brown/ color wire. *SEF type: Without Purple/Skyblue color wire. Continuous A Continuous Buzzer For flashing, R, A Orange, G, B Blue, C White g 00/0V AC, R, A Orange, G, B Blue, C White Purple Skyblue Brown A Flashing COM Continuous *SEB type: Without Brown/ color wire. *SEF type: Without Purple/Skyblue color wire. For continuous light A Continuous Continuous Buzzer For flashing Wire color Light Color of unit Amber Blue Clear Color of Lead Wire Orange Blue White Color of Lead Wire Purple Skyblue [WEP/WE-ccc(FB) ] Continuous light Orange Blue White Flashing COM Brown Continuous For continuous A Continuous or flashing light with audible alarm For continuous light and alarm Orange Blue White For flashing Purple Skyblue A Wire color Light Wire color Orange Blue White Lights Signal line voltage and current per module WEP/WE Signal line voltage and current per module Rated Signal Line Signal Line Current Signal Line Current Inrush Current V AC/DC V AC/DC R,A:00mA G,B,C:80mA V AC/DC 00V AC0V AC V AC/DC AC V R,A: 0mA G,B,C: 0mA Max 0mA 0mA V DC NPN(PNP) Transistor V DC NPN(PNP) Transistor NPN Transistor Continuous light Orange Blue White For continuous light NPN Transistor Continuous light, R, A Orange, G, B Blue, C White + For continuous light PNP Transistor Continuous light, R, A Orange, G, B Blue, C White + For continuous light Capacity of Transistor Current Capacity Withstand Current Leak Transistor (NPN or PNP) Ic 0.A ( unit) Ic 00mA () Vc V IL < 0.mA for outer contact protection All voltage type A Continuous or flashing light with audible alarm Orange Blue White Purple Skyblue Continuous COM V DC Supply For continuous light and alarm Continuous or flashing light, R For continuous light alarm, A Orange, G, B Blue, C White Purple Skyblue + Continuous or flashing light, R, A Orange, G, B Blue, C White Purple Skyblue Brown Flashing COM + For continuous light alarm V DC Flashing COM Brown Type Transistor (NPN or PNP) Current Capacity Ic 0.A Buzzer 00mA For flashing Current Leak IL 0.A [ rate] A For flashing Brown Flashing COM *SEB type: Without Brown/ color wire. For flashing *SEB type: Without Brown/ color wire. For flashing