Sentry Governors. Class 1. Advanced Diagnostics. Sentry Governor Kits

Transcription

1 Ready to Go also offer a range of pre-configured electronic components that can be used in stand-alone application or integrated into an Es-Key system. In keeping with the same rugged design philosophy as the Es-Key range, these components can be utilised in a variety of fixed plant and mobile applications.

2 Sentry Governors 44 Twister 45 Total Pressure Governors 46 Intelli-Tank Level Engine Information Centre 52 Vehicle Data Recorder 53 Seat Belt Warning System 54 Minder Series 56 43

3 Sentry Governors SAE J1939 CAN based pressure governing system. Controls engine speed directly over J1939 network or analogue control. Monitors RPM and other pertinent data directly from the engine ECU. 4.3 full colour LCD display with 8 tactile feedback buttons. Kits include Sentry display, Twister throttle, pressure transducers and associated wiring. Available in horizontal or vertical models. Advanced diagnostics - 2 levels, one for operator and one for maintenance technician. Environmentally sealed - IP67. Voltage : 9-32V Current Draw : 13.8V Analogue Output : 0-5V CAN : SAE J1939 Construction : Polycarbonate Ingress Protection : IP67 Approvals : J1113, ISO , MIL-STD-810F Operating Temperature : -40 C to 85 C 208mm Ø4mm 85mm mm 176mm 57mm Advanced Diagnostics The Sentry Pressure Governor System has the most advanced diagnostics of any pressure controller on the market. It provides two levels of diagnostics: one for the operator, and one for the maintenance technician. Error screen describing issue with suggested solution and illustration Sentry Governor Kits Style/Orientation Kits contain: Vertical 1 x Vertical Display 1 x Twister throttle 1 x Sentry system harness 1 x Vertical decal 1 x Bezel 2 x Transducer PSI * Horizontal 1 x Horizontal Display 1 x Twister throttle 1 x Sentry system harness 1 x Horizontal decal 1 x Bezel 2 x Transducer PSI * * Optional PSI transducer available. 44

4 s Twister is an electronic vernier style throttle for controlling the speed of: - SAE J1939 CAN compliant engines - Analogue (DC voltage) controlled engines. Power-on state is always idle. Interlocked for safety. Clockwise or counter-clockwise operation. Ergonomic control with superior tactile feedback. Large and easily accessible idle button Bright LED indicators: Throttle Ready for interlock, and Active for active engine control. Environmentally sealed - IP67. Twister Voltage : 9-32V Current Draw : 13.8V Analogue Output : 0-5V CAN : SAE J1939 Construction : Die-cast Alloy Ingress Protection : IP67 Approvals : J1113, ISO , MIL-STD-810F Operating Temperature : -40 C to 85 C 98mm Ø4mm 67mm 81mm 113mm 51mm 59mm Twister Output CAN Analogue Connection Kit CONNKIT-TWISTER Suits Both Twisters Crimp tools can be found on page

5 Total Pressure Governors Controls engine speed directly over J1939 network or analogue control. Tactile feedback buttons. Water S.I.P. - Maximises pressure & flow with minimum engine RPM. Large, easy to read alpha-numeric displays. Easy setup & configuration. Dedicated Pump Intake and Pump Discharge displays. TPG+ only. Integrated warning lights - battery voltage, water temperature & oil pressure. Audible alarm output. Programmable presets. Environmentally sealed - IP67. Multi-voltage. Voltage : 9-32V Current Draw : TPG 13.8V TPG+ 13.8V Analogue Output : 0-5V CAN : SAE J1939 Construction : Die-cast Alloy Ingress Protection : IP67 Approvals : SAE J1455, SAE-J1113, MIL-STD-810F Operating Temperature : -40 C to 85 C 94mm Ø5mm 56mm TPG 133mm 152mm mm 12mm 170mm Ø5mm 56mm Dedicated pump intake & discharge displays TPG+ 133mm 152mm 190mm 12mm Total Pressure Governor Kits Kit Description Kits contain: TPG Pump governor TPG+ Pump governor + dedicated pump intake & discharge displays 1 x TPG 1 x Transducer 1 x TPG+ 2 x Transducer 1 x Harness 1 x Manual 1 x Harness 1 x Manual 46

6 Accessories Description Pressure Transducer - 0 to 300 PSI Harness - 1.2m. Suits TPG Harness - 1.2m. Suits TPG+ 47

7 Intelli-Tank Level 40 Easy calibration (1 to 9 point) suitable for all tanks of any size or shape. Programmable output, typically used for autofill function, low/high tank level warning etc. One wire data link allows for unlimited optional remote displays. Ultra bright LEDs easily viewable from 180º to 9 precise tank levels. Custom scrolling text sequences on power up. Built-in self diagnostics displayed through scrolling text. Optional remote driver module used to control external lights, sirens etc concurrent to ITL display. Uses proven industrial pressure transducer instead of probes. Multiple programmable features inbuilt, including LED dimming level and anti-slush function. Rocker switch sized Mini Remote Indicator available. Voltage : 9-32V Current Draw : 13.8V Output : Digital 250mA ground CAN : SAE J1939, Es-Key compatible Construction : Polycarbonate Bezel : Die-cast Alloy Connection : Deutsch DT06-12SB (12-Pin) Ingress Protection : IP67 Approvals : SAE J1113, CE Operating Temperature : -40 C to 85 C Ø3.8mm 80mm 24mm 115mm 130mm 66mm 31mm ITL-40 System Layout 1 - Simple Install Illustration shows a typical tank monitoring system demonstrating the simplicity of installation and the use of the programmable output function. Pressure Transducer ITL-40 Tank Level Indicator Typically used for auto-fill function, low/high tank level warnings etc. Programmable 250mA ground output 48

8 ITLF-40G Intelli-Tank Level 40 Kits Decal Text Decal Colour LED Colour Green Blue Yellow Red Multi WATER LEVEL Blue ITL-40G ITL-40B ITL-40Y ITL-40R ITL-40M FOAM LEVEL Red ITLF-40G ITLF-40B ITLF-40Y ITLF-40R ITLF-40M CLASS A FOAM LEVEL Yellow ITLF-40MYA CLASS B FOAM LEVEL Yellow ITLF-40MYB Kits contain: 1 x Indicator 1 x Indicator Decal 1 x Harness - 3m 1 x Pressure Transducer 1 x Foam Adaptor (Foam Kits only) Multi colour indicators feature 2 rows of Green, Blue, Yellow and Red LEDs from top to bottom ITL-TESTER Accessories Description * Mini Remote Indicator V Mini Remote Indicator Decal - Blue WATER LEVEL Mini Remote Indicator Decal - Red FOAM LEVEL Driver Module 4 x 7.5A outputs 12-24V Zero Pressure Vacuum Vent ITL-TESTER Diagnostic tool for tank level simulation * supplied with 1 x Water Decal & 1 x Foam Decal. 49

9 C Fig ITL-40 Individual Components Description Fig LED Indicator, no decal - Red LED Indicator, no decal - Yellow LED Indicator, no decal - Green LED Indicator, no decal - Blue LED Indicator, no decal - Multi-colour Indicator decal - WATER LEVEL - Green Indicator decal - WATER LEVEL - Blue Indicator decal - FOAM LEVEL - Red Indicator decal - FOAM LEVEL - Green Indicator decal - FOAM LEVEL - Yellow Indicator decal - FOAM LEVEL - Blue Indicator decal - CLASS A FOAM LEVEL - Yellow Indicator decal - CLASS B FOAM LEVEL - Yellow Indicator decal - CLASS B FOAM LEVEL - Green Pressure transducer Foam tank adaptor for pressure transducer Harness - 3m Custom labels available upon request. Other harness lengths available upon request. ITL-40 System Layout 2 - With Options Illustration shows a typical tank monitoring system incorporating the optional Mini Remote Indicator and Remote Driver Module used to control external lights/alarms. ITL-40 Tank Level Indicator Remote Driver Module External Warning Lights External Tank Level Lights Pressure Transducer External Sirens / Horns Mini Remote Indicator 50

10 atalogu Catalogues Lighting LED & Halogen Beacons Strobes Lightbars Minebars ROPS Bar Directional Arrows LED Lighting Bus Warning Light Kits Flasher Units To get your copy visit ionnic.com Connectors DT Series DTM Series DTP Series DTHD Series HD10 Series HD30/HDP20 Series DRC Series PCB Headers Controller Area Network Contacts & Plugs Deutsch Connector Tools To get your copy visit ionnic.com Lighting Safety Electrical

11 Engine Information Centre Engine RPM display. System voltage display & alarm. Engine oil pressure display & alarm. Engine temperature display & alarm. SAE J1587 & SAE J1939 compliant models. Super bright displays for maximum visibility in daylight. Output for External Alarm (0.25A). Input for silencing the alarm. Environmentally sealed - IP67. Multi-voltage. Voltage : 9-32V Current Draw : 13.8V Max Alarm Draw : 250mA CAN : SAE J1939 Construction : Polycarbonate Bezel : Aluminium Alloy Ingress Protection : IP67 Approvals : SAE J1113 Operating Temperature : -40 C to 85 C 72mm 52mm 142mm 45mm Engine Information Centre IV Description Engine Information Centre IV Connection Kit CONNKIT-ENFOIV Crimp tools can be found on page

12 Utilises SAE J1939 CAN standard to record NFPA required data. Retains last 100 hours of stored data in memory. Internal real-time clock with 10 year battery back-up. Integrates with Seat Belt Warning System to record seating data. 32-bit ARM processor. Software available for quick & easy data retrieval. Supplied upon request. USB connector for data retrieval via VDR management software. Monitors and records Engine RPM, Throttle percentage, Vehicle speed, ABS events, Transmission range information, Parking brake position, Master warning position, Seatbelt status. Voltage : 9-32V Current Draw : 13.8V Output : 250mA per Output CAN : SAE J1939 Construction : Polycarbonate Ingress Protection : IP67 Approvals : SAE J1113 Operating Temperature : -40 C to 85 C Vehicle Data Recorder 75mm 102mm M6 16mm 134mm USB connector for data retrieval via VDR management software. Software supplied upon request. LED status indicators 119mm 37mm Vehicle Data Recorder (VDR) Description VDR control module Connection Kit CONNKIT-PDM Crimp tools can be found on page

13 Seat Belt Warning System Utilises SAE J1939 CAN standard to record NFPA required data. Seat Belt Monitor available in rocker size. Large Seat Belt Monitor displays the status of up to 12 seats simultaneously. Can integrate with Vehicle Data Recorder for event archiving. Multi-voltage. Voltage : 9-32V CAN : SAE J1939, 250 Kbit/second Construction : Polycarbonate Ingress Protection : Seat Belt Warning module IP67 Approvals : SAE J1113 Operating Temperature : -40 C to 85 C LED status indicators 102mm 16mm 75mm M6 134mm 119mm 37mm Seat Belt Warning Input Module Current Draw 13.8V

14 158mm 133mm M mm 146mm 23mm 3mm mm 24mm 24mm Indicates all occupied seats have seat belts engaged. Each occupied seat without a seatbelt engaged is momentarily displayed until all are engaged. Seat Belt Warning Displays Description Current Draw 13.8V Large seat belt display Small seat belt display 57 CONNKIT-IO CONNKIT-TWISTER Connection Kits Suits CONNKIT-iO Seat Belt Warning input module (118093) CONNKIT-TWISTER Large Seat Belt Display (118551) Crimp tools can be found on page

15 Minder Series Super-bright, easy to see display. 90dB warning buzzer included in selected models. Compact design. Silence button for audible alarm included. Environmentally sealed - IP67. Multi-voltage. Voltage : 9-32V Alarm Output Polarity : Negative Ingress Protection : IP67 Operating Temperature : -40 C to 85 C Flowminder Displays current flow (litres per minute) in a numeric format. Pressure Gauge The Pressure Gauge displays current pressure or vacuum (kpa, PSI or BAR) in a numeric format. Airminder Airminders display current breathing air level in a simple, easy-to-read LED bar style display. Display flashes at 25% total air capacity. Audible alarm sounds at 20% air capacity. Ideal for aerials, aerial platforms, air trucks and C.F.R. vehicles. Oxyminder Oxyminder displays current oxygen level in a simple, easy-to-read LED bar style display. Display flashes at 25% total air capacity. Audible alarm sounds at 20% air capacity. 63mm Loadminder 48mm 79mm 7mm 97mm Loadminders display the current low-level load in a simple, easy-to-read LED bar style display that instantly adjusts as the ladder angle, extension or live load changes. As the loading increases, so does the number of bars that are illuminated on the display. When the maximum low-level loading approaches (as determined by the aerial manufacturer and calibrated at the factory) the display will begin to flash. A slight (25-50kg) additional load will cause the audible alarm to sound which alerts the operator to an overload condition. Display flashes when approaching maximum load. Audible alarm when maximum reached. Auxiliary output activates strobe (optional). 56

16 Optional accessory Flow Sensor mounting boss SFM Flowminder Description Kit contains fms Flowminder Kit 1 x Display Mounting kit (102008) 1 x Decal FLOWMINDER (103522) 1 x Harness - 3.1m (102033) 1 x Display (111663) 1 x Flow Sensor (102714) SFM Flow Sensor mounting boss Pressure Gauge Description Kit contains psis Digital Pressure Gauge Kit 1 x Display Mounting kit (102008) 1 x Decal PRESSURE (103523) 1 x Harness - 3m (102035) 1 x Display (111667) 1 x Transducer (102161) Airminder Description Kit contains ams Airminder Kit 1 x Display Mounting kit (102008) 1 x Buzzer 90dB (100571) 1 x Silence Button (102088) 1 x Decal % AIR REMAINING (101994) 1 x Pressure Transducer (102606) 1 x Display only (111655) 1 x Harness - 3m (102671) 57

17 Oxyminder Description Kit contains oms Oxygen Minder Kit 1 x Display only (111654) 1 x Pressure Transducer (102606) 1 x Decal % OXYGEN REMAINING (101996) 1 x Silence Button (102088) 1 x Buzzer 90dB (100571) 1 x Display Mounting kit (102008) 1 x Harness 3m (102671) Loadminder Description Kit contains lms Loadminder Kit 1 x Display (111653) 1 x Pressure Transducer (102606) 1 x Decal LOW LEVEL AERIAL LOADING (101995) 1 x Silence Button (102088) 1 x Buzzer 90dB (100571) 1 x Display Mounting kit (102008) 1 x Harness - 3m (102671) Spare Parts Description Suits Replacement display bezel All Minder Series 58