Proportional Valve Group PVG 16/32/128/256

Transcription

1 Service and Parts Manual Proportional Valve Group

2 Revision history Table of revisions Date Changed Rev October 208 Combined installation guides, service and parts manuals 00 2 Danfoss October 208 AX en-0000

3 Contents Function Installation Safety in Systems... 5 PVG 6/32 sectional drawings... 7 PVG 28/256 Sectional Drawing...0 PVG 6 installation... Standard assembly... Plug orientation... 2 Maximum flow setting...3 Pressure setting and adjustment...4 Installation of lever...6 Bleeding... 7 PVE Series Relevant technical data...9 PVHC...2 LED characteristics Standard main spool assembly...23 PVG 32 installation...24 Standard assembly...24 Plug orientation Maximum flow setting...26 Pressure setting and adjustment...27 Installation of lever...29 Bleeding PVEP series PVED-CC series PVE series PVHC...38 Standard main spool assembly...40 PVG 28/256 installation... 4 Standard assembly...4 Plug orientation Pump side module Pressure setting...44 Installation of lever...45 PVE series PVHC...49 Standard main spool assembly...5 PVG acronyms found in service parts PVG 6 service parts...53 Pump side module, PVP Pump side module PVPV...56 Electrical LS pressure unloading valve, PVPX PVB with LS port...59 PVB with PVLP/PVLA, basic module...6 PVLP Shock and PVLA, Suction Valves PVBS, main spool PVM mechanical activation...65 PVMD cover PVH hydraulic actuation...67 PVHC high current actuation...68 PVE series 6 PVEO on/off actuator PVE series 6 PVEA proportional actuator PVS/PVSI end plates...7 PVAS stay bolts Seal kits...74 PVG 32 service parts...75 Danfoss October 208 AX en

4 Contents Pump side module PVP Pump side module PVPV...78 Pump side module PVPM/PVPVM Electrical LS pressure unloading valve, PVPX... 8 External pilot pressure adapter, PVPC...83 PVB basic module Basic module, PVBZ...87 PVBZ with PVBD diverter...89 PVLP Shock and PVLA, Suction Valves... 9 PVBS main spool PVM medchanical activation PVMD, PVMR and PVMF covers...94 PVH hydraulic actuation...96 Electrical actuation PVHC...97 PVDI directional indication...98 PVS/PVSI end plates...99 PVSI, PVSD, PVST end plates...0 PVAS stay bolts...04 Seal kits PVE series 4 PVEO...06 PVE series 4 PVEA PVE series 4 PVEM PVE series 4 PVEP...09 PVE series 4 PVEU... 0 PVE series 4 PVEH... PVE series 4 PVES...2 PVED-CC series PVE series 7 PVEO...4 PVE series 7 PVEO-HP...5 PVE series 7 PVEM... 6 PVE series 7 PVEA... 7 PVE series 7 PVEH... 8 PVE series 7 PVES...9 PVG 28/256 service parts...20 Pump side module, PVPV PVB 28, basic module PVB 256, Basic Module PVLP Shock and PVLA, Suction Valves...26 PVBS main spool...27 PVM mechanical activation PVMD cover...29 PVH hydraulic actuation PVHC high current actuation... 3 PVEO on/off actuator PVEH proportional actuator PVS end plates...37 PVAS stay bolts...39 Seal kits Danfoss October 208 AX en-0000

5 Function Safety in Systems All types and brands of control valves, including proportional valves, can fail. Therefore, the necessary protection against the serious consequences of a functional failure should always be built into the system. General safety considerations For each application an assessment should be made for the consequences of the system in case of pressure failure and uncontrolled or blocked movements. W Warning Because the proportional valve is used in many different applications and under different operating conditions, it is the sole responsibility of the manufacturer to ensure that all performance, safety and warning requirements of the application is met in his selection of products and complies with relevant machine specific and generic standards. Control system example An example of a control system using an aerial lift is shown below: Aerial lift This example breaks down the control system into smaller bits explaining the architecture in depth. Even though many Danfoss components are used in the PVG control system. The function of the control system is to use the output from the PVE together other external sensors to ensure the PLUS+ main controllers correct function of the aerial lift. Danfoss October 208 AX en

6 Function Electrical block diagram W Warning It is the responsibility of the equipment manufacturer that the control system incorporated in the machine is declared as being in conformity with the relevant machine directives. C Caution A mix of electrical actuation and hydraulic actuation on the same valve stack is not safe. PVE and PVH are designed for different pilot pressure. Cost-free repairs, as mentioned in Danfoss General Conditions of Sale, are carried out only at Danfoss or at service shops authorized by Danfoss. 6 Danfoss October 208 AX en-0000

7 Function PVG 6/32 sectional drawings Sectional views of the product help identify certain components for servicing. PVG 6/32 PVP open center PVG 6/32 closed center Danfoss October 208 AX en

8 Function PVG 6 with PVEO PVG 6 with PVEA 8 Danfoss October 208 AX en-0000

9 Function PVG 32 with PVEO PVG 32 with PVEH Danfoss October 208 AX en

10 Service and Parts Manual Function PVG 28/256 Sectional Drawing PVG 256 with PVEH PVG 256 with PVEO 0 Danfoss October 208 AX en-0000

11 Service and Parts Manual Installation PVG 6 installation Standard assembled PVG 6 The exploded view illustration helps identify PVG 6 components to assist in installation. Oil flow direction for standard assembled PVG 6 PVM PVM A B B A PVS C xxx xxx xx xxx PVP xxx D xx xxx xxx PVEO/A xx PVB6 PVEA-F PVEO/A-CI PVHC PVH PVMD Identification C: PVG number, week and year of installation and series number PVP- pressure setting D: Engraved part number on PVP and PVB Danfoss October 208 AX en-0000

12 Installation PVG 6 Plug orientation The plug/port orientation shows dimensions of assembled product based on number of PVB used and data on mounting threads. Mounting thread: M8 x min 0 mm or 5/6-8 x min 0.39 in Torque: 40 N m [354 lbf in] Mounting thread: M8 x min 0 mm or 5/6-8 x min 0,39 in Torque: PVS: 20 N m [77 lbf in] PVSI: 40 N m [354 lbf in] In particularly exposed applications, protection in the form of screening of the electrical actuator is recommended L L2 In particularly exposed applications, protection in the form of screening of the electrical actuator is recommended Dimensions No. of PVB L mm [in] [2.9] [4.49] [6.06] [7.64] [9.2] [0.79] [2.36] [3.94] [5.5] [7.09] [8.66] [20.24] L2 mm [in] [5.5] [7.44] [8.39] [0.3] [2.24] [3.23] [5.6] [7.09] [8.03] [9.96] [2.69] [22.68] 2 Danfoss October 208 AX en-0000

13 Installation PVG 6/32 pump side module, PVP Pump side and max flow setting B B A A Flow P A Max. flow: P B 6±Nm[53±9lbf-in] Danfoss October 208 AX en

14 Installation PVG 6 pressure setting (LS connection) PVG 6 pressure setting, PVP/PVB C LS B C C LS C Relief valve adjustment C-C 4[0.6] bar [740 psi] T The table below determines which availability of relief valve based on date of PVP/PVB purchase. Relief valve availability Valve Prior to week 40/2003 Between week 40/2003 and week 2/202 Relief valve X X Relief valve 2 X X After week 2/202 4 Danfoss October 208 AX en-0000

15 Installation Rated pressure Product PVG 6 with PVS PVG 6 with PVSI Rated pressure 300 bar [435 psi] 350 bar [5076 psi] Torque on connection/port based on seal used Max. tightening torque Screwed connection RG BSP. F, R, G With steel washer Connection/port P A/B T LS, M, LSA, LSB, PVH, Accu. LX, PVS, PVSI /2 in 3/4 in 3/8 in 3/4 in /4 in /8 in /4 in 30 N m [50 lbf in] With copper washer 30 N m [270 lbf in] With aluminum washer 70 N m [620 lbf in] With cutting edge 30 N m [50 lbf in] 20 N m [850 lbf in] 50 N m [445 lbf in] 0 N m [970 lbf in] 20 N m [850 lbf in] 30 N m [50 lbf in] 30 N m [270 lbf in] 70 N m [620 lbf in] 30 N m [50 lbf in] 20 N m [850 lbf in] 50 N m [445 lbf in] 0 N m [970 lbf in] 20 N m [850 lbf in] 40 N m [350 lbf in] 20 N m [80 lbf in] 30 N m [270 lbf in] 40 N m [350 lbf in] 7 N m [50 lbf in] 5 N m [35 lbf in] 5 N m [35 lbf in] 7 N m [50 lbf in] 40 N m [350 lbf in] 20 N m [80 lbf in] 30 N m [270 lbf in] 40 N m [350 lbf in] Screwed connection UNF 7/8 in - 4 /6 in - 2 3/4 in - 6 /6 in - 2 /2 in /8 in - 24 /2 in - 20 O-ring 90 N m [800 lbf in] 20 N m [060 lbf in] 90 N m [800 lbf in] 20 N m [060 lbf in] 30 N m [270 lbf in] 0 N m [90 lbf in] 30 N m [270 lbf in] Danfoss October 208 AX en

16 Service and Parts Manual Installation PVG 6 installation of lever PVM lever installation positions and range Standard installation is shown on the left, installation with float is shown on the right. 6 Danfoss October 208 AX en-0000

17 Installation PVG Bleeding If the group is installed vertically, it is recommended to bleed it at the adjusting screws (Pos. A). It may be necessary to bleed the PVEK because of the hydraulic build-up of PVEA. PVG 6/32 bleeding A Danfoss October 208 AX en

18 Installation PVG 6 with PVE series 6 installation PVE series 6 exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] When installing, protect the LVDT pin (if present), ensure O-rings are in place and be sure to not overtorque. 8 Danfoss October 208 AX en-0000

19 Installation PVEO/PVEO-CI control specifications PVG 6 technical data overview Only an overview of technical data is shown below; for comprehensive data, please see the Technical Information document for PVG 6. Description Type Value Supply Voltage (Udc) Rated 2 Vdc 24 Vdc Range to 5 Vdc 22 to 30 Vdc Max. ripple 5% 5% Current consumption Typical 320 ma 60 ma PVEA/PVEA-CI/PVEA-F control specifications Supply voltage (Udc) Rated to 32 Vdc Range to 32 Vdc Max. ripple 5% Signal voltage (Us) Neutral 0.5 Udc Q: P A 0.25 Udc Q: P B 0.75 Udc Current 2 Vdc Vdc 70 ma Input impedance Rated 2 kω Input capacitance Rated 00 µf Operating conditions Pilot pressure Nominal 3.5 bar [96 psi] Minimum 0.0 bar [45 psi] Maximum 5.0 bar [28 psi] Oil consumption Neutral 0.04 l/min [0.0 US gal/min] Locked position 0.04 l/min [0.0 US gal/min] Actuating 0.6 l/min [0.6 US gal/min] Storage temperature Ambient -50 to +90 C [-58 to +94 F] Operating temperature Ambient -40 to +90 C [-40 to +94 F] Oil viscosity Operating range 2 to 75 mm 2 /sec [65 to 347 SUS] Minimum 4 mm 2 /sec [39 SUS] Maximum 460 mm 2 /sec [228 SUS] Oil cleanliness Minimum 8/6/3 (according to ISO 4406) PVG 6 connector variants PVG 6 connector variants for PVEO, PVEA, PVEO-CI, PVEA-CI, PVEA-F with pin layout information. Danfoss October 208 AX en

20 Installation Pin connector x 4 DEUTSCH 2 x 4 DEUTSCH x 6 DEUTSCH Pin layout for PVEO, PVEA, PVEO-CI, PVEA-CI PVE Type Connector Pin Pin 2 Pin 3 Pin 4 PVEO x 4 DEUTSCH NC2 Vneg Vneg NC4 PVEA x 4 DEUTSCH Vi SP Vneg Vbat PVEO-CI, PVEA-CI 2 x 4 DEUTSCH CAN_H CAN_L Vbat Vneg Pin layout for PVEA-F Connector Pin Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 x 6 DEUTSCH Vi NC Vf SP Vneg Vbat 20 Danfoss October 208 AX en-0000

21 Installation PVHC for PVG 6 5 [0.97] 8 ±0.5 Nm [70 ±4.4 lbf in] The seal in the PVHC connector and the seals for individual conductors are crucial for correctly sealing the conductor. U DC (B) U DC (A) Technical data Controller output current range 2 V ma 24 V ma Coil resistance 2 V.0 Ω ± 5% 24 V 0.25 Ω ± 5% Pilot pressure (over tank) Nominal 25 bar [363 psi] Minimum Maximum 2 bar [305 psi] 25 bar [363 psi] Control pressure Range 5-5 bar [ psi] Maximum tank pressure Port T Static 25 bar [363 psi] Port T Dynamic 30 bar [435 psi] Temperature range Ambient -30 C to 80 C [-22 to 76 F] Medium -20 C to 80 C [-4 to 76 F] Oil viscosity Range 2 to 75 mm2/s [65 to 347 SUS] Minimum Maximum Enclosure Protection class DEUTSCH DT IP 67 Filtering in the hydraulic system; Max. permissible degree of contamination Designed to be used with hydraulic activated spools 23/9/6 (ISO 4406, 999 version) 4 mm2/s [39 SUS] 400 mm2/s [230 SUS] Danfoss October 208 AX en

22 Installation PVG 6 LED characteristics For troubleshooting LED characteristics, please see the Technical Information document for PVG 6. PVEO LED characteristics Color LED view Function Green Power ON PVEA LED characteristics Green Hz Red Hz Operating Power Save mode Internal fault External or Float fault 22 Danfoss October 208 AX en-0000

23 Installation PVG 6 main spool assembly 8±Nm 8±Nm Danfoss October 208 AX en

24 Installation PVG 32 installation Standard assembled PVG 32 Oil flow direction for standard assembled PVG 6 The exploded view illustration helps identify PVG 32 components to assist in installation. PVM PVM B A B A PVS C D xxxxxxxxxxxxxxxxxxxxxx PVP PVEP PVB32 PVED PVEO/A/M PVEH PVHC PVH PVMD Identification C: PVG number, week and year of installation and series number PVP- pressure setting D: Engraved part number on PVP and PVB 24 Danfoss October 208 AX en-0000

25 Installation PVG 32 plug orientation The PVG 32 series has increasing L port sizes with higher PVB numbers. *85[3.3] *70[6.7] *70[6.7] PVP/PVSI: Max. 40 Nm [354 lbf in] PVS: Max. 20 Nm [77 lbf in] *85[3.3] In particularly exposed applications, protection in the form of screening of the electrical actuator is recommended Number of PVB L mm [in] [3.23] [5.2] [7.0] [8.90] [0.79] [2.68] [4.57] [6.46] [8.35] [20.24] [22.3] [24.02] L2 mm [in] [5.55] [7.48] [9.37] [.30] [3.9] [5.2] [7.0] [8.94] [20.83] [22.76] [24.65] [26.57] Danfoss October 208 AX en

26 Installation PVG 6/32 pump side module, PVP Pump side and max flow setting B B A A Flow P A Max. flow: P B 6±Nm[53±9lbf-in] 26 Danfoss October 208 AX en-0000

27 Installation PVG 32 pressure setting PVG 32 pressure setting (LS connection) C LS C C LS B C C LS A C 4[0.6] C-C 6[0.24] C-C 360º~20 bar 360º~740 psi 360º~00 bar 360º~450 psi T T P0940 Relief valve availability Valve Prior to week 40/2003 Between week 40/2003 and week 2/202 Relief valve X X Relief valve 2 X X Rated pressure "X" denotes availability. After week 2/202 Module PVG 32 with PVS PVG 32 with PVSI PVG 32 with PVBZ PVG 32 with HIC aluminum PVG 32/20 with PVS PVG 32/20 with PVSI PVG 32/00 with PVS PVG 32/00 with PVSI Rated pressure 300 bar [435 psi] 350 bar [5076 psi] 20 bar [3046 psi] 20 bar [3046 psi] 300 bar [435 psi] 350 bar [5076 psi] 300 bar [435 psi] 350 bar [5076 psi] Torque on connection/port based on seal used Seal Connection/port P A/B T LS, M, LSA, LSB, PVH, Accu. LX, PVS, PVSI Sealing thread G/2 G3/4 G/2 G3/4 G/2 G/8 G/4 With steel washer 30 N m [50 lbf in] 20 N m [850 lbf in] 30 N m [50 lbf in] 20 N m [850 lbf in] 40 N m [350 lbf in] 7 N m [50 lbf in] 40 N m [350 lbf in] Danfoss October 208 AX en

28 Installation Torque on connection/port based on seal used (continued) Seal With copper washer 30 N m [270 lbf in] with aluminum washer 70 N m [620 lbf in] With cutting edge 30 N m [50 lbf in] Connection/port P A/B T LS, M, LSA, LSB, PVH, Accu. 50 N m [445 lbf in] 0 N m [970 lbf in] 20 N m [850 lbf in] 30 N m [270 lbf in] 70 N m [620 lbf in] 30 N m [50 lbf in] 50 N m [445 lbf in] 0 N m [970 lbf in] 20 N m [850 lbf in] 20 N m [80 lbf in] 30 N m [270 lbf in] 40 N m [350 lbf in] LX, PVS, PVSI 5 N m [35 lbf in] 5 N m [35 lbf in] 7 N m [50 lbf in] 20 N m [80 lbf in] 30 N m [270 lbf in] 40 N m [350 lbf in] 28 Danfoss October 208 AX en-0000

29 Installation PVG 32 installation of lever The lever must be screwed in completely (±0.5N m) 8 ± N m PVG Bleeding If the group is installed vertically, it is recommended to bleed it at the adjusting screws (Pos. A). It may be necessary to bleed the PVEK because of the hydraulic build-up of PVEA. PVG 6/32 bleeding A Danfoss October 208 AX en

30 Installation PVEP series 4 for PVG 32 Seals must be correctly set to successfully seal the connector. PVEP/PVEP-F PVEP/PVEP-F 5[0.20] 8±0.5 Nm [70±4.4 lbf in] Be sure to protect the LVDT Pin and O-rings are in place during installation. Do not over torque. The seal in the DEUTSCH connector and the use of.5 mm 2 lines in all connections are crucial for correctly sealing the connector. PVEP series 4 for PVG 32 pin layout x6 DEUTSCH Pin layout Type Connector Pin Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 PVEP x6 DEUTSCH PWM_A Error PWM_B No connection Not used Udc PVEP series 4 for PVG 32 technical data PVEP control specification Description Type Value Supply Voltage (UDC) Range to 32 VDC Max. ripple 5% Max. 5 min 36 V 30 Danfoss October 208 AX en-0000

31 Installation PVEP control specification (continued) Description Type Value PWM Control range 0 80 % Float position control PWM_A = PWM_B = 90 % Frequency Input voltage swing Trigger point Hz 0 UDC Input Impedance Standard pull down 5 kw Power consumption Error voltage Fault V bat PVEP operating conditions No fault 70 % of V bat 7 W < 2 V All connector terminals are short-circuit protected, and protected against reverse connection (and their combinations). Connecting error pins from two or more PVE s will cause the surveillance system to malfunction. Description Type Value Pilot Pressure Nominal 3.5 bar [96 psi] Minimum Maximum 0.0 bar [45 psi] 5.0 bar [28 psi] Oil Consumption Neutral 0.04 l/min [0.0 US gal/min] Locked Position Actuating 0. l/min [0.03 US gal/min] 0.6 l/min [0.6 US gal/min] Storage Temperature Ambient -40 to +90 C [-40 to +94 F] Operating Temperature Ambient -30 to +60 C [-22 to +40 F] Oil Viscosity Operating Range 2 75 cst [ SUS] Minimum Maximum 4 cst [39 SUS] 460 cst [228 SUS] Oil Cleanliness Maximum 8/6/3 (according to ISO 4406) PVEP LED characteristics Green Red Hz Operating Internal fault External or float fault Danfoss October 208 AX en

32 Installation PVED-CC series 5 for PVG 32 Assembling the PVE requires close attention and completion of the information below. PVED-CC series 5 installation V A V30452.A Be sure to protect LVDT pin and O-rings are in place. Do not over torque. PVED-CC series 5 for PVG 32 pin layout 2x4 AMP x4 DEUTSCH Pin layout for PVEP Type Connector Pin Pin 2 Pin 3 Pin 4 PVEP 2x4 AMP CAN-L Vbat+ GND CAN-H 2x4 DEUTSCH CAN-H CAN-L Vbat+ GND All pins are internally connected. Internally connected 32 Danfoss October 208 AX en-0000

33 Installation PVED-CC series 5 for PVG 32 technical data PVED-CC control specification Description Type Value Supply Voltage (UDC) Nominal to 32 VDC Minimum 9 V Maximum 36 V Current 2 V V 300 ma Power 2 V V 7.2 W PVED-CC operating conditions Description Type Value Pilot Pressure Nominal 3.5 bar [96 psi] Minimum 0.0 bar [45 psi] Maximum 5.0 bar [28 psi] Oil Consumption Neutral 0 l/min [0 US gal/min] Locked Position 0 l/min [0 US gal/min] Actuating 0.7 l/min [0.84 US gal/min] Storage Temperature Ambient -40 to +90 C [-40 to +94 F] Operating Temperature Ambient -30 to +60 C [-22 to +40 F] Oil Viscosity Operating Range 2 75 cst [ SUS] Minimum 4 cst [39 SUS] Maximum 460 cst [228 SUS] Oil Cleanliness Maximum 8/6/3 (according to ISO 4406) Grade of enclosure IP 66 Danfoss October 208 AX en

34 Installation PVE series 7 for PVG 32 Assembling the PVE requires close attention. PVEO/M/A Series 7 PVEH/S Series 7 5 [0.2] 8 ± 0.5 N m [70 ± 4.4 lbf in] 5 [0.2] 8 ± 0.5 N m [70 ± 4.4 lbf in] P0920 Be sure to protect LVDT pin if present and ensure O-rings and gaskets are in place during installation. Do not over torque. PVEA is not compatible with PVG 00 High Flow. PVE series 7 for PVG 32 connector overview x 4 DEUTSCH 2 x 4 DEUTSCH x 6 DEUTSCH x 4 AMP 2 x 4 AMP x 6 AMP x 4 DIN PVEO-DI 4-pin AMP Connector Pinout Pin Pin 2 Pin 3 Pin 4 2x4 AMP (A) U DC _A U DC _B GND GND 2x4 AMP (B) DI-B DI-A GND U DC2 34 Danfoss October 208 AX en-0000

35 Installation PVEM 4-pin DIN Connector Pinout Pin Pin 2 Pin 3 Pin 4 x4 DIN U DC U S Error GND PVEO, PVEO-R and PVEO-HP 4-pin Connector Pinout Pin Pin 2 Pin 3 Pin 4 x4 AMP U DC _A U DC _B GND GND x4 DEUTSCH U DC _A GND GND U DC _B x4 DIN U DC _A U DC _B - GND PVEA/PVEH/PVES Pinout Pin Pin 2 Pin 3 Pin 4 x4 AMP U S U DC GND Error x4 DEUTSCH U S Error GND U DC x4 DIN U DC U S Error GND PVEA-DI and PVEH-DI 4-pin Connector Pinout Pin Pin 2 Pin 3 Pin 4 2x4 AMP (A) U S U DC GND Error 2x4 AMP (B) DI-A DI-B GND U DC2 2x4 DEUTSCH (A) U S Error GND U DC 2x4 DEUTSCH (B) U DC2 GND DI-A DI-B PVEH-FLA 6-pin Connector Pinout Pin Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 x6 AMP U S U DC GND Error Float - PVEH-SP and PVES-SP 6-pin Connector Pinout Pin Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 x6 DEUTSCH U S Error - SP GND U DC PVE series 7 for PVG 32 operating conditions The PVE products work under the specific conditions detailed in the table below. Description Type Value Pilot Pressure Nominal 3.5 bar [96 psi] Minimum 0.0 bar [45 psi] Maximum 5.0 bar [28 psi] Oil Consumption Neutral 0.04 l/min [0.0 US gal/min] Locked Position 0.04 l/min [0.0 US gal/min] Actuating 0.6 l/min [0.6 US gal/min] Storage Temperature Ambient -50 to +90 C [-58 to +94 F] Operating Temperature Ambient -40 to +90 C [-40 to +94 F] Danfoss October 208 AX en

36 Installation Description Type Value Oil Viscosity Operating Range 2 75 cst [ SUS] Minimum 4 cst [39 SUS] Maximum 460 cst [228 SUS] Oil Cleanliness Maximum 8/6/3 (according to ISO 4406) PVE series 7 for PVG 32 control specifications The tables below detail the control specifications for PVEO, PVEM, PVEA/PVEH/PVES. PVEO control specification Supply Voltage (UDC) Rated 2 VDC 24 VDC Range 5 VDC VDC Max. ripple 5 % PVEM control specification Supply Voltage (UDC) Rated/Range 32 VDC Max. ripple 5% Signal Voltage (US) Neutral US = 0.5 UDC Q: P A US = ( ) UDC Q: P B US = ( ) UDC Signal Voltage PWM (US) neutral US = 50% DUT Q: P A US = 50% 25% DUT Q: P B US = 50% 75% DUT PWM Frequency (US) Recommended > 200 Hz Input Impedance Rated 2 kω Input Capacitance Rated 00 nf PVEA/PVEH/PVES control specification Supply Voltage (UDC) Rated/Range 32 VDC Max. ripple 5% Signal Voltage (US) Neutral US = 0.5 UDC Q: P A US = ( ) UDC Q: P B US = ( ) UDC Signal Voltage PWM (US) neutral US = 50% DUT Q: P A US = 50% 25% DUT Q: P B US = 50% 75% DUT PWM Frequency (U S) Recommended > 000 Hz Input Impedance Rated 2 kω Input Capacitance Rated 00 nf PVE series 7 for PVG 32 LED characteristics The LED provided on the PVE products can tell the user if the product is operating correctly or not. PVEO LED characteristics Color LED view Function Green Power ON 36 Danfoss October 208 AX en-0000

37 Installation PVEM/PVEA/PVEH/PVES LED characteristics Green Hz Red Hz Operating Neutral - Power Save Internal fault External or Float fault PVEH-U/PVES-U LED characteristics Green Hz Red Hz Yellow Operating Neutral - Power Save Internal fault External or Float fault Disable Mode Danfoss October 208 AX en

38 Installation PVHC for PVG 32 installation The seal in the PVHC connector and the seals for individual conductors are crucial for correctly sealing the connector. PVHC for PVG 32 5 [0.20] 8 ± 0.5 Nm [70 ± 4.4 lbf in] PVHC for PVG 32 connector DEUTSCH (left) and AMP (right) connectors U DC (B) U DC (A) DC (B) DC (A) U U Parameter Control range 2 V 24 V Current ma ma Pressure control range 5 to 5 bar [72.5 to 27.5 psi] PVHC for PVG 32 technical data Description Value Controller output current range 2 V ma 24 V ma Coil resistance 2 V 4.72 Ω ± 5% 24 V 20.8 Ω ± 5% Pilot pressure (over tank) * Nominal 25 bar [363 psi] Minimum 2 bar [305 psi] Maximum 25 bar [363 psi] Control pressure Range 5-5 bar [ psi] 38 Danfoss October 208 AX en-0000

39 Installation Description Value Maximum tank pressure Port T Static 25 bar [363 psi] Port T Dynamic 30 bar [435 psi] Temperature range Ambient -30 C to 80 C [-22 to 76 F] Medium -20 C to 80 C [-4 to 76 F] Oil viscosity Range 2 to 75 mm2/s [65 to 347 SUS] Minimum Maximum Enclosure Protection class DEUTSCH DT IP 67 Filtering in the hydraulic system; Max. permissible degree of contamination * Designed to be used with hydraulic activated spools AMP JPT IP 66 23/9/6 (ISO 4406, 999 version) 4 mm2/s [39 SUS] 400 mm2/s [230 SUS] The PVHC is produced in an environment using mineral based hydraulic oil. Danfoss October 208 AX en

40 Installation Standard main spool assembly PVG 32 main spool assembly installation Friction Detent Mec.Float A-Port 2[0.47] 8±Nm [7±9lbf-in] Mec.Float B-Port Standard Standard DETENT (NO SPRING) Standard FLOAT A FLOAT B PVM [0.43] 8±Nm [7±9lbf-in] PVML 8±Nm [7±9lbf-in] 40 Danfoss October 208 AX en-0000

41 xxxxxx Service and Parts Manual Installation PVG 28/256 installation Oil flow direction for standard assembled groups Standard assembled PVG 28/256 Flow: P A PVM PVM C PVSI xxxxxxxx xxxxxxxx D PVPV xxxx PVEH, PVEH-U, PVEH-FLA PVB28 PVB256 PVEO PVHC PVH PVMD P Identification C D PVG - number, week and year of installation and series number PVP - pressure setting Engraved part number on PVPV, PVB and PVSI Danfoss October 208 AX en

42 Installation Installation and plug orientation PVG 28/256 plug orientation L 345 [4.6]* 345 [3.6]* 4 x M2 x 8 PVP/PVGI Max. 60 Nm [530 lbf in] 32 [5.2] 20 [4.7]* 20 [4.7]* In particularly exposed applications, protection in the form of screening of the electrical actuator is recommended * Room for dismantling PVB L (mm) L (in) PVB L (mm) L (in) Danfoss October 208 AX en-0000

43 Installation PVG 28/256 pump side module Pump side and max flow setting Flow: P A Max. flow: P B 8 ±2 N m [59 ±8 lbf in] Max. flow: P A 8 ±2 N m [59 ±8 lbf in] Danfoss October 208 AX en

44 Installation PVG 28/256 pressure setting Pressure setting LS A, LS B C C C C LSA LSA C C LS B 4 [0.6] C C LS B C-C 360º ~20 bar [740 psi] Relief valve LS A/B T P Rated pressure Product PVG 28 with PVSI PVG 256 w PVSI Rated Pressure 350 bar [5076 psi] 350 bar [5076 psi] 44 Danfoss October 208 AX en-0000

45 30 30 Service and Parts Manual Installation PVG 28/256 installation of lever The lever must be screwed in completely. PVM lever PVM Standard 30 PVM with float Danfoss October 208 AX en

46 Installation PVE 28/256 PVE series 7 installation PVEO Series 7 PVEH/H-U/H-FLA Series 7 5 [0.2] 8 ±0.5 N m [70 ±4.4 lbf in] P W Warning For safety reasons, the PVE actuator and interface components must be considered as one unit. Do not try to disassemble under any circumstances. PVG 28/256 PVE connector variants x4 DEUTSCH x6 DEUTSCH x4 DIN Pin Pin Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 PVEO x4 DEUTSCH Udc_A GND GND Udc_B PVEH PVEH-U x4 DIN Udc_A Udc_B GND x4 DEUTSCH Us Error GND Udc x4 DIN Udc Us Error GND PVEH-FLA x6 DEUTSCH Us Error Float GND Udc PVG 28/256 PVE control specifications PVEO control specifications Control specification PVEO Supply Voltage (Udc) Rated 2 Vdc 24 Vdc Range 5 Vdc Vdc Max. ripple 5% 5% 46 Danfoss October 208 AX en-0000

47 Installation PVEH/H-FLA and PVEH-U control specifications Control specification PVEH/H-FLA PVEH-U Supply Voltage (Udc) Rated/Range 32 Vdc 32 Vdc Max. ripple 5% 5% Signal Voltage (Us) Neutral Us = 0.5 Udc Us = 5 V Q: P A Us = ( ) Udc Us = 5 V 2.5 V Q: P B Us = ( ) Udc Us = 5 V 7.5 V Signal Voltage PWM (Us) Neutral Us = 50% DUT Q: P A Us = 50% 25% DUT Q: P B Us = 50% 75% DUT PWM Frequency (Us) Recommended >000 Hz Input Impedance Rated 2 kω Input Capacitance Rated 00 nf PVG 28/256 PVE operating conditions PVEO, PVEH/H-U/H-FLA Operating Conditions Pilot Pressure Nominal 3.5 bar [96 psi] Minimum 0.0 bar [45 psi] Maximum 5.0 bar [220 psi] Storage Temperature Ambient -50 C 90 C [-58 F 94 F] Operating Temperature Ambient -40 C 90 C [-40 F 94 F] Oil Viscosity Operating range 2 75 cst [ SUS] Minimum 4 cst [39 SUS] Maximum 460 cst [228 SUS] Oil Cleanliness Maximum Maximum PVG 28/256 PVE LED characteristics PVEO LED characteristics Color LED view Function Green Power ON PVEH/H-FLA LED characteristics Color LED view Function Green Operating Hz Red Hz Neutral - Power Save Internal fault External or Float fault PVEH-U LED characteristics Color LED view Funtion Green Operating Hz Neutral - Power Save Danfoss October 208 AX en

48 Installation PVEH-U LED characteristics (continued) Color LED view Funtion Red Internal fault Hz External or Float fault Yellow Disable mode 48 Danfoss October 208 AX en-0000

49 Installation PVHC for PVG 28/256 installation 5 [0.2] 8 ± 0.5 N m [70 ± 4.4 lbf in] PVHC for PVG 28/256 connector The seal in the PVHC connector and the seals for individual conductors are crucial for correctly sealing the connector. DEUTSCH Version AMP Version (B) Udc (B) Udc (A) Udc (A) Udc PVHC for PVG 28/256 technical data Controller output current range 2 V ma 24 V ma Coil resistance 2 V 4.72 Ω ± 5% 24 V 20.8 Ω ± 5% Pilot pressure (over tank) * Nominal 25 bar [363 psi] Minimum 2 bar [305 psi] Maximum 25 bar [363 psi] Control pressure Range 5-5 bar [ psi] Max. tank pressure Port T Static 25 bar [363 psi] Port T Dynamic 30 bar [435 psi] Temperature range Ambient -30 C 80 C [-22 F 76 F] Medium -20 C 80 C [-4 F 76 F] Oil viscosity Operating range 2 75 mm2/s [ SUS] Minimum 4 mm 2 /s [39 SUS] Maximum 400 mm 2 /s [230 SUS] Danfoss October 208 AX en

50 Installation Enclosure - Protection class DEUTSCH DT IP 67 Filtering in the hydraulic system; Max. permissible degree of contamination * Designed to be used with hydraulic activated spools AMP JPT 2/24 V IP 66 23/9/6 (ISO 4406, 999 version) 50 Danfoss October 208 AX en-0000

51 Installation PVG 28/256 main spool assembly installation Standard spools for PVE and PVH/PVHC Spool for PVE Spool for PVH/PVHC 6±2Nm [4±8lbf-in] 6±2Nm [4±8lbf-in] Same tightening torque for PVE and PVH/PVHC spools Danfoss October 208 AX en

52 PVG acronyms found in service parts These acronyms appear in the service parts list. PVG (Proportional Valve Group) acronyms PPRV PVAS PVB PVBD PVBE PVBO PVBS PVBSO PVBZ PVDI PVE PVEA PVED PVEH PVEO PVES PVGI PVH PVHC PVLA PVLP PVM PVMD PVMF PVMR PVP PVPC PVPD PVPE PVPF PVPH PVPP PVPV PVPV/M PVPVP PVPX, LS PVS PVSI PVSKM PVSP/PVSPM PVT PVTI Pilot Pressure Reduction Valve Assembly (Tie Rod) Kit Basic Module (Body) Diverter Module for PVB/PVBZ Basic End Module (Body) Basic Open-Ended Module (Body) Main Spool for PVB Main Spool for PVBO Basic Module (Body) Zero Leak Directional Indicator Electrical Actuator Electrical Actuator-Fine Proportional Electrical Actuator-Digital Electrical Actuator-High Proportional Electrical Actuator-ON/OFF Electrical Actuator-Super Proportional Interface Module Cover for Hydraulic Actuation Electrical Actuator-High Current Anti-Cavitation Valve Shock Valve Mechanical Actuator Cover for Mechanical Activation Cover for Mechanical Float Cover for Friction Detent Pump Side Module (Inlet) Plug for external pilot oil supply Open Center PVPF Dummy Spool Electrical Unloading Valve for PVPF Open Center PVP Hydraulic Unloading Valve for PVPF Electrical Pilot Shut-Off Valve Closed Center PVP without Pressure Adjustment Spool Pump side module Closed Center PVP with Priority LS Unloading valve End Plate (Aluminum) End Plate (Cast Iron) Full Flow Cut-Off Module Priority Module Tank Side Module Interface Module 52 Danfoss October 208 AX en-0000

53 PVG 6 service parts PVP exploded view PVG 6 pump side module PVP [0.24] 30±3Nm [266±27lbf-in] 5 6 5±0.5Nm [44±4.4lbf-in] 6 5±0.5Nm [44±4.4lbf-in] 5±0.5Nm [44±4.4lbf-in] [0.6] 8±Nm [7±9lbf-in] 7 Closed Center [.0] 4±Nm [35±9lbf-in] 6[0.24] 30±3Nm [266±27lbf-in] Open center 0 3 6[0.24] 30±3Nm [266±27lbf-in] 3[0.2] 4±Nm [35±9lbf-in] 5 4 PVP kits Description Code number P-port T-port/HPCO-port Letter Open center 57B5000 G/2 G3/4 A 57B500 G3/4 57B5200 7/8-4 UNF -/6 UN 57B5300 -/6 UN Open center with PVPX facility 57B502 G3/4 G3/4 B Open center with PPRV for PVE 57B500 G/2 G3/4 C 57B50 G3/ B520 7/8-4 UNF -/6 UN 57B530 -/6-2 UNF -/6-2 UNF Open center with PPRV for PVE and PVPX facility 57B502 G/2 G3/4 D B52 G3/4 G3/4 57B522 7/8-4 UNF -/6 UN 57B532 -/6-2 UNF -/6-2 UNF Danfoss October 208 AX en

54 PVP kits (continued) Description Code number P-port T-port/HPCO-port Letter Open center with PPRV for PVE and pilot oil pressure take-off Open center with PPRV for PVH/PVHC and pilot oil pressure take-off 57B580 G3/4 G3/4 E 57B5380 -/6-2 UNF -/6-2 UNF 57B590 G3/4 G3/4 F 57B5390 -/6-2 UNF -/6-2 UNF G3/4 G3/4 Closed center 57B500 G/2 G3/4 G 57B50 G3/4 57B520 7/8-4 UNF -/6 UN 57B530 -/6 UN Closed center with PVPX facility 57B503 G3/4 G3/4 H Closed Center with PPRV for PVE 57B50 G/2 G3/4 I 57B5 G3/4 57B52 7/8-4 UNF -/6 UN 57B53 -/6 UN Closed center with PPRV for PVE and PVPX facility 57B503 G/2 G3/4 J Closed center with PPRV for PVE and pilot oil pressure take-off Closed center with PPRV for PVH/PVHC and pilot oil pressure take-off 57B53 G3/4 57B523 7/8-4 UNF -/6 UN 57B533 -/6-2 UNF -/6-2 UNF 57B58 G3/4 G3/4 K 57B538 -/6-2 UNF -/6-2 UNF 57B59 G3/4 G3/4 L 57B539 -/6-2 UNF -/6-2 UNF PVP parts list Item Description Code number Letter A B C D E F G H I J K L Service tool for relief valve 55L Sealed adjusting screw (for sealing with a wire) 3 Sealed plastic plug, black (50 pcs.) Sealed plastic plug, yellow (50 pcs.) 55L L668 55L Pilot supply for PVE 3.5 bar 55L Pilot supply for PVH/PVHC 25 bar Relief valve 55L Plastic plug for G/ Plastic plug for 7/8-4 UNF - Plastic plug for G3/4 - Plastic plug for -/6-2 UNF - 7 N/A (See PVP for PVG32) Conversion kit open to closed and closed to open center 9 Orifice Ø.0, bonded seal and plug for closed center 55L Danfoss October 208 AX en-0000

55 PVP parts list (continued) Item Description Code number Letter A B C D E F G H I J K L 0 Plug M6 for open center 55L Plug with O-ring N/A (See PVP for PVG32) Inlet compensator assembly - 4 Plastic plug - 5 Locking pin - 6 Orifice M6 Ø.0-7 PVP inlet module - Danfoss October 208 AX en

56 PVPV exploded view PVG 6 pump side module PVPV 6 5±0.5Nm [44±4.4lbf-in] 6[0.24] 30±3Nm [266±27lbf-in] [0.24] 30±3Nm [266±27lbf-in] [0.5] 35±3Nm [30±27lbf-in] 6[0.24] 30±3Nm [266±27lbf-in] PVPV kits Description Code number P-port T-port Letter Closed center with PPRV for PVH/PVHC 57B596 5/6-2 UN 5/6-2 UN A Closed center with PPRV for PVE 57B59 5/6-2 UN 5/6-2 UN B 57B5938 G G Closed center with PPRV for PVH/PVHC and PVLP G G C /6-2 UN 5/6-2 UN Closed center with PPRV for PVE and PVLP 57B593 5/6-2 UN 5/6-2 UN D 57B594 G G PVPV parts list Item Description Code number Letter A B C D PVLP assembly See PVLP section Plug for PVLP 57B Plug - 4 Pilot supply for PVE 3.5 bar 55L Pilot supply for PVH/PVHC 25 bar Plug for external Pp Plastic plug Plug PVPV inlet module - 56 Danfoss October 208 AX en-0000

57 PVPX exploded view PVG 6/32 electrical LS pressure unloading valve, PVPX 24[0.94] 45+5Nm [398+44lbf-in] 2 24[0.94] 45+5Nm [398+44lbf-in] 3 24[0.94] 45+5Nm [398+44lbf-in] 4 24[0.94] 45+5Nm [398+44lbf-in] PVPX plug Description Manual Override Item Code number Plug for PVPX port - 57B560 PVPX, NO configuration x2 DIN (2 Vdc) B4236 x2 DIN (24 Vdc) - 57B4238 x2 AMP (2 Vdc) B498 x2 AMP (24 Vdc) - 57B4982 x2 DEUTSCH (2 Vdc) x2 DEUTSCH (24 Vdc) Danfoss October 208 AX en

58 PVPX, NC configuration x2 DIN (2 Vdc) B4246 x2 DIN (24 Vdc) - 57B4248 x2 DIN (26 Vdc) - 57B4976 x2 AMP (2 Vdc) B4983 x2 AMP (24 Vdc) - 57B4984 x2 DEUTSCH (2 Vdc) x2 DEUTSCH PVPX, NOMO configuration x2 DIN (2 Vdc) PUSH 2 57B4256 x2 DIN (2 Vdc) PUSH & TURN 57B4257 x2 DIN (24 Vdc) PUSH 57B4258 x2 DIN (24 Vdc) PUSH & TURN 57B4259 x2 DIN (26 Vdc) PUSH 57B4260 x2 AMP (2 Vdc) PUSH 4 57B4985 x2 AMP (24 Vdc) PUSH 57B Danfoss October 208 AX en-0000

59 PVG 6 PVB with LS, basic module PVB with LS exploded view [0.24] 30±3Nm [266±27lbf-in] PVB with LS kits Description Code number A-port B-port Letter Compensated PVB /8 BSP 3/8 BSP A /4-6 UNF 3/4-6 UNF Compensated PVB with LS /8 BSP 3/8 BSP B /4-6 UNF 3/4-6 UNF Non-Compensated PVB 042 3/8 BSP 3/8 BSP C /4-6 UNF 3/4-6 UNF Non-Compensated PVB with check valve /8 BSP 3/8 BSP D /4-6 UNF 3/4-6 UNF PVB with LS parts list Item Description Code number Letter A B C D PVB Basic module - 2 Relief valve 55L Service tool for relief valve 55L Danfoss October 208 AX en

60 PVB with LS parts list (continued) Item Description Code number Letter A B C D 4 Sealed adjusting screw (for sealing with a wire) 55L Sealed plastic plug, black (50 pcs.) 55L668 Sealed plastic plug, yellow (50 pcs.) 55L Shuttle disc assembly - 7 Compensator assembly Locking pin Danfoss October 208 AX en-0000

61 PVB with PVLP/PVLA exploded view PVG 6 PVB with PVLP/PVLA, basic module 2 4 3[0.5] 35±3Nm [30±27lbf-in] 3 4 3[0.5] 35±3Nm [30±27lbf-in] [0.24] 30±3Nm [266±27lbf-in] PVB with PVLP/PVLA kits Description Code number A-port B-port Letter Compensated PVB /8 BSP 3/8 BSP A /4-6 UNF 3/4-6 UNF Compensated PVB with PVLP/PVLA /8 BSP 3/8 BSP B /4-6 UNF 3/4-6 UNF Non-Compensated PVB 042 3/8 BSP 3/8 BSP C /4-6 UNF 3/4-6 UNF Non-Compensated PVB with check valve /8 BSP 3/8 BSP D /4-6 UNF 3/4-6 UNF Non-Compensated PVB with PVLP/PVLA /8 BSP 3/8 BSP E /4-6 UNF 3/4-6 UNF Danfoss October 208 AX en

62 PVB with PVLP/PVLA kits (continued) Description Code number A-port B-port Letter Non-Compensated PVB with check valve and PVLP/PVLA /8 BSP 3/8 BSP F /4-6 UNF 3/4-6 UNF PVB with PVLP/PVLA parts list Item Description Code number Letter A B C D E F PVB basic module - 2 PVLA See PVLP/PVLA PVLP See PVLP/PVLA Plug for PVLP/PVLA 57B Shuttle disc assembly - 6 Compensator assembly Locking pin Danfoss October 208 AX en-0000

63 PVLP Shock and PVLA, Suction Valves 35±3 Nm [30±27 lbf in] 3 [0.50] 35±3 Nm 2 [30±27 lbf in] 3 [0.50] Type Part number PVLP/PVLA PVLA 57B200 PVLP 57B B B B B200 57B225 57B240 57B250 57B260 57B275 57B290 57B220 57B B B B B B B B B2380 Plug 57B2002 Part number: 57B2230 Danfoss October 208 AX en

64 PVBS exploded view PVG 6 PVBS, main spool 8±Nm 8±Nm PVG 6 PVBS part numbers PVBS Symmetrical main spools code numbers Description Code number according to flow in l/min [US gal/min] 5 [.32] 0 [2.64] 25 [6.60] 40 [0.57] 65 [7.7] Open neutral, use with PVE Open neutral, use with PVH Closed neutral, use with PVE Closed neutral, use with PVH PVBS Asymmetrical main spools code numbers Description Code number according to flow in l/min [US gal/min] 5/2.5 [.32/0.66] 0/5 [2.64/.32] 25/0 [6.60/2.64] 25/5 [6.60/3.96] 40/5 [0.57/3.96] 40/25 [0.57/6.60] Cylinder ratio Closed neutral, use with PVE Closed neutral, use with PVH For more PVG 6 PVBS part numbers, please see PVG 6 Technical Information. 64 Danfoss October 208 AX en-0000

65 PVM exploded view PVG 6 PVM mechanical activation 2 6 0[0.40] 6±Nm [53±9lbf-in] 4[0.2] 2.5±Nm [22±9lbf-in] [0.2] 5[0.20] 8±0.5Nm [70±4.5lbf-in] 3[0.5] 8±Nm [70±9lbf-in] PVM kits Description Code number Letter Non-adjustable A Non-adjustable with float B Non-adjustable with lever base and lever C Non-adjustable with float, lever base and lever D Adjustable E Adjustable with lever base and lever F PVM parts list Item Description Code number Letter A B C D E F PVM - 2 Seal kit 57B Lever base Lever with black knob Lever base and lever with black knob Lever base and lever with red knob Screw M6x Danfoss October 208 AX en

66 PVG 6 PVMD cover PVMD exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVMD kit Description Code number Cover for mechanical activation 0558 PVMD parts list Item Description Screw M6x5 (4 pcs.) 2 Seal kit 66 Danfoss October 208 AX en-0000

67 PVG 6 PVH hydraulic actuation PVH exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVH kits Description Code number G/4 BSP /6-8 UNF 0838 Item Description Screw M6x5 (4 pcs.) 2 Seal kit Danfoss October 208 AX en

68 PVHC exploded view PVG 6 PVHC high current actuation 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 4 [0.6] 3 Nm [26.5 lbf in] 3 2 PVHC kits Description Code number Letter 2x2 DEUTSCH (2 V) 2694 A 2x2 DEUTSCH (24 V) B PVHC parts list Item Description Code number Letter A B Screw 55L Solenoid valve 2 V Solenoid valve 24 V Seal kit Danfoss October 208 AX en-0000

69 PVG 6 PVE S6 PVEO on/off actuator PVEO 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVEO kits Type Description Code number PVEO x4 DEUTSCH (2 Vdc) x4 DEUTSCH (24 Vdc) PVEO-CI x4 DEUTSCH (J939/ISObus) x4 DEUTSCH (CANopen) PVEO parts list Item Description Code number Amount Screw kit 55L499 2 Seal kit 3365 Danfoss October 208 AX en

70 PVG 6 PVE S6 PVEA, proportional actuator PVEA 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 Type Description Code number PVEA x4 DEUTSCH PVEA-F x4 DEUTSCH (Float B-port) PVEA-CI x4 DEUTSCH (J939/ISObus) 2945 x4 DEUTSCH (CANopen) Item Description Code number Amount Screw kit 55L499 2 Seal kit Danfoss October 208 AX en-0000

71 PVG 6/32 PVS/PVSI end plates PVS/PVSI exploded view 2 5±0.5Nm [44±4.4lbf-in] PVSI with P, T, LX, and M connection exploded view 3 4 4±0.5Nm [35±4.4lbf-in] 5 5±0.5Nm [44±4.4lbf-in] 4±0.5Nm [35±4.4lbf-in] 6 4 PVST with T connection exploded view 8 5±0.5Nm [44±4.4lbf-in] 7 9 6[0.24] 30±3Nm [266±27lbf-in] PVS/PVSI kits Type Description Mounting Code number Letter PVS (Aluminum) End plate M8 57B2000 A 5/6-8 UNC 57B2020 End plate with LX-connection M8 57B20 B 5/6-8 UNC 57B202 Danfoss October 208 AX en

72 PVS/PVSI kits (continued) Type Description Mounting Code number Letter PVSI (Cast iron) End plate 5/6-8 UNC 57B2004 C M8 57B204 End plate with LX-connection 5/6-8 UNC 57B2005 D M8 57B205 57B290 End plate with P-,T-, LX- and M-connection M8 57B2920 E PVST (Steel) End plate with T-connection M8 57B2500 F 5/6-8 UNC 57B2520 Item Description Code number Letter A B C D E F PVS/PVSI End plate with LX-connection Plastic plug PVSI with P-, T-, LX- and M-connection Plastic plug Plastic plug Plastic plug PVST with T-connection Plastic plug Plug with O-ring Danfoss October 208 AX en-0000

73 PVAS exploded view PVG 6/32 PVAS stay bolts Item Description Code number Set of seals for 7 work sections: PVB 6/ For PVAS part numbers, refer to the relevant Technical Information document. Danfoss October 208 AX en

74 PVG 6 seal kits Seal kits for PVG 6 Type Description Code number PVP/PVPV/PVPVM Module 57B5999 PVB Module 57B6999 PVM/PVH/PVMD Module 57B3999 PVEO/PVEA/PVEO-CI/PVEA-CI/PVHC Module 3365 Seal kit for one work section For a PVG 6 with PVB-section 57B8999 Seal kit for seven work sections For a PVG 6 with 7 PVB-section PVPX Module 57B5996 PVPX Module before B Danfoss October 208 AX en-0000

75 PVG 32 service parts PVP exploded view PVG 32 pump side module, PVP [0.24] 30±3Nm [266±27lbf-in] 5 6 5±0.5Nm [44±4.4lbf-in] 6 5±0.5Nm [44±4.4lbf-in] 5±0.5Nm [44±4.4lbf-in] [0.6] 8±Nm [7±9lbf-in] 7 Closed Center [.0] 4±Nm [35±9lbf-in] 6[0.24] 30±3Nm [266±27lbf-in] Open center 0 3 6[0.24] 30±3Nm [266±27lbf-in] 3[0.2] 4±Nm [35±9lbf-in] 5 4 PVP kits Description Code number P port T/HPCO port Letter Open center 57B5000 G/2 G3/4 A 57B500 G3/4 57B5200 7/8-4 UNF -/6 UN 57B5300 -/6 UN Open center with PVPX facility 57B502 G3/4 G3/4 B Open center with PPRV for PVE 57B500 G/2 G3/4 C Open center with PPRV for PVE and T0 facility and pilot oil pressure take-off 57B G3/4 57B520 7/8-4 UNF -/6 UN 57B530 -/6-2 UNF -/6-2 UNF M27x2.0 M27x2.0 D 57B530 G3/4 G3/4 57B5330 -/6-2 UNF -/6-2 UNF 57B5964 M22x.5 M22x.5 Danfoss October 208 AX en

76 PVP kits (continued) Description Code number P port T/HPCO port Letter Open center with PPRV for PVE, T0 and HPCO facility Open center with PPRV for PVE, T0, HPCO and PVPX facility and pilot oil pressure takeoff Open center with PPRV for PVE and PVPX facility Open center with PPRV for PVE and PVPX and T0 facility and pilot oil pressure take-off Open center with PPRV for PVE and pilot oil pressure take-off Open center with PPRV for PVH/PVHC and pilot oil pressure take-off Open center with PPRV for PVH/PVHC and PVPX facility 57B540 G3/4 G3/4 E 57B5340 -/6-2 UNF -/6-2 UNF 57B596 M27x2.0 M27x2.0 57B5965 M22x.5 M22x.5 57B542 G3/4 G3/4 F 57B5342 -/6-2 UNF -/6-2 UNF 57B502 G/2 G3/4 G B52 G3/4 G3/4 57B522 7/8-4 UNF -/6 UN 57B532 -/6-2 UNF -/6-2 UNF 57B532 G3/4 G3/4 H 57B5332 -/6-2 UNF -/6-2 UNF 57B580 G3/4 G3/4 I 57B5380 -/6-2 UNF -/6-2 UNF 57B590 G3/4 G3/4 J 57B5390 -/6-2 UNF -/6-2 UNF G3/4 G3/ G3/4 G3/4 K Closed center 57B500 G/2 G3/4 L 57B50 G3/4 57B520 7/8-4 UNF -/6 UN 57B530 -/6 UN Closed center with PVPX facility 57B503 G3/4 G3/4 M Closed Center with PPRV for PVE 57B50 G/2 G3/4 N Closed Center with PPRV for PVE and T0 facility and pilot oil pressure take-off Closed center with PPRV for PVE and PVPX facility Closed center with PPRV for PVE, T0 and PVPX facility and pilot oil pressure take-off Closed center with PPRV for PVE and pilot oil pressure take-off Closed center with PPRV for PVH/PVHC and T0 facility Closed center with PPRV for PVH/PVHC and pilot oil pressure take-off 57B5 G3/4 57B52 7/8-4 UNF -/6 UN 57B53 -/6 UN 57B53 G3/4 G3/4 O 57B533 -/6-2 UNF -/6-2 UNF 57B503 G/2 G3/4 P 57B53 G3/4 57B523 7/8-4 UNF -/6 UN 57B533 -/6-2 UNF -/6-2 UNF 57B533 G3/4 G3/4 Q 57B5333 -/6-2 UNF -/6-2 UNF 57B58 G3/4 G3/4 R 57B538 -/6-2 UNF -/6-2 UNF /6-2 UNF -/6-2 UNF S 57B59 G3/4 G3/4 T 57B539 -/6-2 UNF -/6-2 UNF 76 Danfoss October 208 AX en-0000

77 PVP parts list Item Description Code number Letter A B C D E F G H I J Relief valve service tool 55L Sealed adjusting screw 55L Plastic plug (black) 55L Pilot supply for PVE (3.5 bar) 55L Pilot supply for PVH/PVHC (25 bar) Relief valve 55L Plastic plug T0 plug Conversion kit (open closed, closed open) 9 Orifice Ø.0, bonded seal and plug for closed center 55L M6 plug for open center 55L553 Plug with O-ring Plastic plug Inlet compensator assembly - 4 Plastic plug - 5 Locking pin - 6 Orifice M6 Ø.0-7 PVP inlet module - Item Description Code number Letter K L M N O P Q R S T Relief valve service tool 55L Sealed adjusting screw 55L Plastic plug (black) 55L668 4 Pilot supply for PVE (3.5 bar) 55L Pilot supply for PVH/PVHC (25 bar) Relief valve 55L Plastic plug T0 plug Conversion kit (open closed, closed open) 9 Orifice Ø.0, bonded seal and plug for closed center 55L M6 plug for open center 55L Plug with O-ring Plastic plug Inlet compensator assembly - 4 Plastic plug - 5 Locking pin - 6 Orifice M6 Ø.0-7 PVP inlet module - Danfoss October 208 AX en

78 PVPV exploded view PVG 32 pump side module PVPV 6 5±0.5Nm [44±4.4lbf-in] 6[0.24] 30±3Nm [266±27lbf-in] [0.24] 30±3Nm [266±27lbf-in] [0.5] 35±3Nm [30±27lbf-in] 6[0.24] 30±3Nm [266±27lbf-in] PVPV kits Description Code number P port T port Letter Closed center M27x2.0 M33x2.0 A Closed center with T0 facility M27x2.0 M27x2.0 B Closed center with PPRV for PVH/PVHC 57B596 5/6-2 UN 5/6-2 UN C Closed center with PPRV for PVE 57B59 5/6-2 UN 5/6-2 UN D Closed center with PPRV for PVE and T0 facility Closed center with PPRV for PVH/PVHC and PVLP Closed center with PPRV for PVH/PVHC and T0 facility 57B5938 G G M27x2.0 M33x2.0 57B M27x2.0 M27x2.0 E G G F /6-2 UN 5/6-2 UN 57B5963 -/6-2 UNF -/6-2 UNF G Closed center with PPRV for PVE and PVLP 57B593 5/6-2 UN 5/6-2 UN H Closed center with PPRV for PVE and PVLP and T0 facility 57B594 G G 57B B5973 * * This module includes the plug for external Pp (item 5) G G I /6-2 UNF -/6-2 UNF PVPV parts list Item Description Code number Letter A B C D E F G H I PVLP assembly See PVLP section Plug for PVLP 57B Danfoss October 208 AX en-0000

79 PVPV parts list (continued) Item Description Code number Letter A B C D E F G H I 3 Plug Pilot suplly for PVE 3.5 bar 55L Pilot suplly for PVH/PVHC 25 bar Plug for external Pp Plastic plug Plug PVPV inlet module Danfoss October 208 AX en

80 PVPM/PVPVM exploded view PVG 32 pump side module PVPM/PVPVM 6 5±0.5Nm [44±4.4lbf-in] 6[0.24] 30±3Nm [266±27lbf-in] [0.24] 30±3Nm [266±27lbf-in] [0.5] 35±3Nm 6[0.24] [30±27lbf-in] 30±3Nm [266±27lbf-in] Type Description Code number P-port T-port Letter PVPVM Closed center with PPRV for PVE 57B592 5/6-2 UN 5/6-2 UN A PVPM Closed center with PPRV for PVH/PVHC and PVLP Closed center with PPRV for PVE and PVLP Open Center/Closed Center with PVLP and T0 facility 57B5937 G G /6-2 UN 5/6-2 UN B 57B5986* G G 57B594 5/6-2 UN 5/6-2 UN C 57B5940 G G /6-2 UN 5/6-2 UN D G G Item Description Code number Letter A B C D PVLP assembly See PVLP section - 2 Plug for PVLP 57B Plug Pilot supply for PVE 3.5 bar 55L Pilot supply for PVH/PVHC 25 bar Plug for external Pp Plastic plug Plug PVPV inlet module Danfoss October 208 AX en-0000

81 PVPX exploded view PVG 6/32 electrical LS pressure unloading valve, PVPX 24[0.94] 45+5Nm [398+44lbf-in] 2 24[0.94] 45+5Nm [398+44lbf-in] 3 24[0.94] 45+5Nm [398+44lbf-in] 4 24[0.94] 45+5Nm [398+44lbf-in] PVPX plug Description Manual Override Item Code number Plug for PVPX port - 57B560 PVPX, NO configuration x2 DIN (2 Vdc) B4236 x2 DIN (24 Vdc) - 57B4238 x2 AMP (2 Vdc) B498 x2 AMP (24 Vdc) - 57B4982 x2 DEUTSCH (2 Vdc) x2 DEUTSCH (24 Vdc) Danfoss October 208 AX en

82 PVPX, NC configuration x2 DIN (2 Vdc) B4246 x2 DIN (24 Vdc) - 57B4248 x2 DIN (26 Vdc) - 57B4976 x2 AMP (2 Vdc) B4983 x2 AMP (24 Vdc) - 57B4984 x2 DEUTSCH (2 Vdc) x2 DEUTSCH PVPX, NOMO configuration x2 DIN (2 Vdc) PUSH 2 57B4256 x2 DIN (2 Vdc) PUSH & TURN 57B4257 x2 DIN (24 Vdc) PUSH 57B4258 x2 DIN (24 Vdc) PUSH & TURN 57B4259 x2 DIN (26 Vdc) PUSH 57B4260 x2 AMP (2 Vdc) PUSH 4 57B4985 x2 AMP (24 Vdc) PUSH 57B Danfoss October 208 AX en-0000

83 PVG 32 external pilot pressure adapter, PVPC PVPC exploded view 2 98[0.75] 40±3Nm [355±25lbf-in] Type Item Thread Code number PVPC without check valve G/2 57B5400 /2-20 UNF 58X000 PVPC with check valve 2 G/2 57B5600 /2-20 UNF 57B5700 Danfoss October 208 AX en

84 PVG 32 basic module, PVB PVB exploded view 4 5 3[0.5] 35±3Nm [30±27lbf-in] [0.5] 35±3Nm [30±27lbf-in] ±0.5Nm [44±4.4lbf-in] Pressure setting 4 Pressure setting [0.39] 0±Nm [88.5±9lbf-in] 6[0.24] 30±3Nm [266±27lbf-in] PVB part kits Type Description Code number A/B-port LS A/B-port Letter Uncompensated PVB Basic module 57B6000 G/2 - A 57B6400 7/8-4 UNF - Basic module with T0 57B600 G/2-57B640 7/8-4 UNF - Basic module with PVLP/PVLA 57B6030 G/2 - B 57B6430 7/8-4 UNF - Basic module with PVLP/PVLA and LS A/B shuttle valve G/2 - C 84 Danfoss October 208 AX en-0000

85 PVB part kits (continued) Type Description Code number A/B-port LS A/B-port Letter Uncompensated PVB with load drop check valve Basic module 57B600 G/2 - D 57B6500 7/8-4 UNF - Basic module with T0 57B60 G/2-57B6909 7/8-4 UNF - Basic module with PVLP/PVLA 57B630 G/2 - E Basic module with PVLP/PVLA and T0 Basic module with PVLP/PVLA and LS A/B shuttle valve 57B6530 7/8-4 UNF - 57B640 G/2-57B6904 7/8-4 UNF - 57B636 G/2 - F 57B6536 7/8-4 UNF - Compensated PVB Basic module 57B6200 G/2 - G 57B6600 7/8-4 UNF - 57B6849 Machined top - Basic module with T0 57B620 G/2-57B6922 7/8-4 UNF - Basic module with PVLP/PVLA 57B6230 G/2 - H Basic module with PVLP/PVLA and T0 57B6630 7/8-4 UNF - 57B6240 G/2-57B6906 7/8-4 UNF - 57B6850 M22x.5 - Dampened compensated PVB Basic module 57B6206 G/2 - I /8-4 UNF - Basic module with PVLP/PVLA 57B6236 G/2 - J /8-4 UNF - Compensated PVB with LS A/B Basic module 57B6203 G/2 G/4 K 57B6603 7/8-4 UNF /2-20 UNF Basic module with T0 57B623 G/2 G/4 57B663 7/8-4 UNF /2-20 UNF Basic module with PVLP/PVLA 57B6233 G/2 G/4 L Basic module with PVLP/PVLA and T0 57B6633 7/8-4 UNF /2-20 UNF 57B6243 G/2 G/4 57B6643 7/8-4 UNF /2-20 UNF Compensated high flow PVB Basic module with T /8-4 UNF - M Compensated high flow PVB with LS A/B G/2 - Basic module with PVLP/PVLA 57B6852 G/2 - N Basic module with PVLP/PVLA, T0 and LS A/B shuttle 57B6938 7/8-4 UNF /8-4 UNF - O Basic module 57B6855 G/2 G/4 P Basic module with T G/2 G/ /8-4 UNF /2-20 UNF Basic module with PVLP/PVLA 57B6854 G/2 G/4 Q Basic module with PVLP/PVLA and T /8-4 UNF /2-20 UNF /8-4 UNF /2-20 UNF Danfoss October 208 AX en

86 PVB parts list Item Description Code number Letter A B C D E F G H I PVLP assembly See PVLP section Plug for PVLP/PVLA 57B PVLA assembly See PVLP section Service tool for relief valve 55L Sealed adjusting screw (for sealing with a wire) 6 Sealed plastic plug, black (50 pcs.) Sealed plastic plug, yellow (50 pcs.) 55L L L Relief valve 55L Compensator assembly Plug Damping screw Load drop check valve assembly LS shuttle valve assembly Shuttle disc - 4 Plastic plug PVB basic module - Item Description Code number Letter J K L M N O P Q PVLP assembly See PVLP section Plug for PVLP/PVLA 57B PVLA assembly See PVLP section Service tool for relief valve 55L Sealed adjusting screw (for sealing with a wire) 6 Sealed plastic plug, black (50 pcs.) Sealed plastic plug, yellow (50 pcs.) 55L L L Relief valve 55L Compensator assembly - 9 Plug Damping screw Load drop check valve assembly LS shuttle valve assembly Shuttle disc - 4 Plastic plug PVB basic module - 86 Danfoss October 208 AX en-0000

87 Standard PVBZ exploded view PVG 32 basic module, PVBZ 5±0.5Nm [44±4.4lbf-in] 2 2 4[0.6] 20Nm [77lbf-in] 5±0.5Nm [44±4.4lbf-in] [0.24] 30±3Nm [266±27lbf-in] Type Description Code number A/B-port POC Letter Uncompensated PVBZ with POC Basic module 57B605 G/2 B-port A Basic module with LS A/B shuttle valve 57B645 7/8-4 UNF B-port 57B6969 Machined top A-port 57B6452 7/8-4 UNF A/B-port B 57B6052 G/2 A/B-port Compensated PVBZ with POC Basic module 57B625 G/2 B-port C 57B6960 7/8-4 UNF A-port 57B665 7/8-4 UNF B-port Machined top A-port 57B6252 G/2 A/B-port D 57B6652 7/8-4 UNF A/B-port Basic module with thermo relief 57B626 G/2 B-port E Basic module with thermo relief and LS A/B shuttle valve 57B666 7/8-4 UNF B-port 57B6262 G/2 A/B-port F 57B6662 7/8-4 UNF A/B-port 57B6266 G/2 A/B-port G 57B6666 7/8-4 UNF A/B-port 57B6954 m22x.5 A/B-port 57B6952 Machined top A/B-port 57B6958 Machined top A/B-port Danfoss October 208 AX en

88 Type Description Code number A/B-port POC Letter Compensated high flow PVBZ with POC Basic module with LS A/B shuttle valve Basic module with PVLP/PVLA and LS A/B shuttle valve Basic module with PVLP/PVLA on B- port 57B6957 M22x.5 A/B-port H M22x.5 A/B-port G/2 A/B-port /8-4 UNF A/B-port 57B6968 M22x.5 B-port I Item Description Code number Letter A B C D E F G H I Plastic plug Thermo relief valve Pilot valve Shuttle disc - 5 Pilot operated check valve (POC) 6 Compensator assembly Plug Locking pin LS shuttle valve assembly 0 Pilot operated check valve (POC) Danfoss October 208 AX en-0000

89 Service and Parts Manual PVG 32 basic module PVBZ with PVBD diverter PVBZ with PVBD diverter exploded view [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 4 50±5Nm [443±44lbf-in] ±5Nm [443±44lbf-in] ±3Nm [266±27lbf-in] [0.24] 35±3Nm [30±27lbf-in] PVBZ with PVBD kits Type Description Code number A/B-port POC Letter Compensated high flow PVBZ with POC Basic module with manifold interface 57B6958 Machined top A/B-port A Machined top A/B-port Machined top A/B-port 57B50 M22 x.5-57b503 7/8-4 UNF M22 x.5 - C Code number Letter A B C PVBD PVBD diverter 6/2 shift valve Multi-valve for PVBZ Item Description B PVBD Diverter Plastic plugs Screw PVBD spool PVC assembly PVC Solenoid - - Danfoss October 208 AX en

90 Item Description Code number Letter A B C 7 Pilot operated check valve (POC) LS shuttle valve assembly Locking pin Plug Compensator assembly Pilot operated check valve (POC) Shuttle disc Pilot valve PVBZ basic module with manifold interface Danfoss October 208 AX en-0000

91 PVLP Shock and PVLA, Suction Valves 35±3 Nm [30±27 lbf in] 3 [0.50] 35±3 Nm 2 [30±27 lbf in] 3 [0.50] Type Part number PVLP/PVLA PVLA 57B200 PVLP 57B B B B B200 57B225 57B240 57B250 57B260 57B275 57B290 57B220 57B B B B B B B B B2380 Plug 57B2002 Part number: 57B2230 Danfoss October 208 AX en

92 PVBS exploded view PVG 32 PVBS main spool Friction Detent 2[0.47] 8±Nm [7±9lbf-in] [0.43] 8±Nm [7±9lbf-in] Mec.Float A-Port Mec.Float B-Port Standard Standard DETENT (NO SPRING) Standard FLOAT A FLOAT B PVM PVML 8±Nm [7±9lbf-in] For spool part numbers, see PVG 32 Technical Information. 92 Danfoss October 208 AX en-0000

93 PVM exploded view PVG 32 PVM, mechanical activation 2 6 0[0.40] 6±Nm [53±9lbf-in] 4[0.2] 2.5±Nm [22±9lbf-in] [0.2] 5[0.20] 8±0.5Nm [70±4.5lbf-in] 3[0.5] 8±Nm [70±9lbf-in] PVM kits Type Description Code number Letter PVM (Aluminum) Non-adjustable 57B393 A Non-adjustable with lever base 57B394 B Non-adjustable with lever base and lever 57B39 C Adjustable 57B373 D Adjustable with lever base 57B374 E Adjustable with lever base and lever 57B37 F PVM (Anodized aluminum) Adjustable 57B386 D Adjustable with lever base and lever 57B384 F PVM (Cast iron) Adjustable with lever base and lever 57B36 PVM parts list Item Description Code number Letter A B C D E F PVM - 2 Seal kit 57B Lever base Lever with black knob Lever base and lever with black knob Lever base and lever with red knob Screw M6x Danfoss October 208 AX en

94 PVMD exploded view PVG 32 PVMD, PVMR and PVMF covers 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVMR/PVMF exploded view [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 5 Cover kits Type Description Code number Letter PVMD Cover in aluminum 57B000 A Cover in anodized aluminum 57B0009 Cover in cast iron 57B002 PVMF Cover in aluminum 57B0005 B PVMR Cover in aluminum 57B0004 C Cover in anodized aluminum 57B002 Cover in cast iron 57B Danfoss October 208 AX en-0000

95 Parts list Item Description Code number Letter A B C Screw Seal kit 57B Friction detent plug assembly Screw Seal kit 57B Danfoss October 208 AX en

96 PVG 32 PVH hydraulic actuation PVH exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVH kits Description Connection Code number Aluminum 9/6-8 UNF 57B0007 Anodized aluminum 57B000 Cast iron 57B004 Aluminum G/4 57B0008 Anodized aluminum 57B00 Cast iron 57B006 Item Description Code number Amount Screw Seal kit 57B Danfoss October 208 AX en-0000

97 PVHC exploded view PVG 32 PVHC electrical actuation 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 4 [0.6] 3 Nm [26.5 lbf in] 2 3 PVHC kits Description Code number AMP connector - 2 V 2037 AMP connector - 24 V 2036 DEUTSCH connector 2 V 2038 DEUTSCH connector 24 V 2039 Parts list Item Description Code number Amount Screw Solenoid valve Seal kit 57B3999 Danfoss October 208 AX en

98 PVG 32 PVDI directional indicator PVDI exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 Direction indicator kits Type Description Code number PVDI Directional indicator - x4 DIN 57B00 Directional indicator - x4 DIN 57B002 Directional indicator - x4 DIN 57B003 Directional indicator with two NO switches - x4 DIN 57B005 PVDI-H (For PVH) Directional Indicator for hydraulic actuation x4 DIN 57B004 Parts list Item Description Code number Amount Screw Seal kit 57B Danfoss October 208 AX en-0000

99 PVG 6/32 PVS/PVSI end plates PVS/PVSI exploded view 2 5±0.5Nm [44±4.4lbf-in] PVSI with P, T, LX, and M connection exploded view 3 4 4±0.5Nm [35±4.4lbf-in] 5 5±0.5Nm [44±4.4lbf-in] 4±0.5Nm [35±4.4lbf-in] 6 4 PVST with T connection exploded view 8 5±0.5Nm [44±4.4lbf-in] 7 9 6[0.24] 30±3Nm [266±27lbf-in] PVS/PVSI kits Type Description Mounting Code number Letter PVS (Aluminum) End plate M8 57B2000 A 5/6-8 UNC 57B2020 End plate with LX-connection M8 57B20 B 5/6-8 UNC 57B202 Danfoss October 208 AX en

100 PVS/PVSI kits (continued) Type Description Mounting Code number Letter PVSI (Cast iron) End plate 5/6-8 UNC 57B2004 C M8 57B204 End plate with LX-connection 5/6-8 UNC 57B2005 D M8 57B205 57B290 End plate with P-,T-, LX- and M-connection M8 57B2920 E PVST (Steel) End plate with T-connection M8 57B2500 F 5/6-8 UNC 57B2520 Item Description Code number Letter A B C D E F PVS/PVSI End plate with LX-connection Plastic plug PVSI with P-, T-, LX- and M-connection Plastic plug Plastic plug Plastic plug PVST with T-connection Plastic plug Plug with O-ring Danfoss October 208 AX en-0000

101 PVG 32 PVSI, PVSD, PVST end plate PVSI start plate exploded view 6[0.24] 30±3Nm [266±27lbf-in] ±0.5Nm [35±4.4lbf-in] 6[0.24] 30±3Nm [266±27lbf-in] PVSD end plate exploded view 35±5Nm [309±44lbf-in] ±0.5Nm [44±4.4lbf-in] 4±0.5Nm [35±4.4lbf-in] 6 6[0.24] 30±3Nm [266±27lbf-in] 7 90±5Nm [797±44lbf-in] PVSI with PVE PPRV exploded view 6[0.24] 30±3Nm [266±27lbf-in] [0.24] 30±3Nm [266±27lbf-in] Danfoss October 208 AX en

102 PVST with PVE PPRV and PP dump 24 6[0.24] 30±3Nm [266±27lbf-in] [0.24] 30±3Nm [266±27lbf-in] 29 6[0.24] 30±3Nm [266±27lbf-in] ±3Nm [266±27lbf-in] 5±0.5Nm [44±27lbf-in] 6[0.24] 30±3Nm [266±27lbf-in] Type Description Mounting Code number Letter PVSI Start plate M A 5/6-8 UNC End plate with PVE PPRV M0 57b207 B PVST End plate with PVE PPRV and PP dump (iron) M C PVSD PVSD End plate M8 57B2904 D Item Description Code number Letter A B C D PVS/PVSI End plate with LX connection Plastic plug PVSI with P-, T-, LX- and M-connection Plastic plug Plastic plug Plastic plug PVST with T-connection Plastic plug Plug with O-ring Plug Pilot supply for PVE 3.5 bar Plastic plug PVSI Start plate Pilot cartridge Plastic plug Check valve Plug Plastic plug PVSD end plate PVSI with PVE PPRV Plug Danfoss October 208 AX en-0000

103 Item Description Code number Letter A B C D 22 Pilot supply for PVE 3.5 bar PVST with PVE PPRV and PP dump Plug Plug PVPP Electrical Pilot Shut-Off valve Plug Selector for LX Plug Pilot supply for PVE 3.5 bar Danfoss October 208 AX en

104 PVAS exploded view PVG 6/32 PVAS stay bolts Item Description Code number Set of seals for 7 work sections: PVB 6/ For PVAS part numbers, refer to the relevant Technical Information document. 04 Danfoss October 208 AX en-0000

105 PVG 32 seal kits Seal kits for PVG 32 Type Description Code number PVP/PVPV/PVPVM Module 57B5999 PVB Module 57B6999 PVM/PVH/PVMD/PVMR/PVMF Module 57B3999 PVEO/PVEM/PVEP/PVEA/PVEH/PVES Module 57B4997 PVDI Module 57B099 Seal kit for one work section For a PVG 32 with PVB section 57B8999 Seal kit for seven work sections For a PVG 32 with 7 PVB section PVPX Module 57B5996 PVHC Module PVEO/PVEM/PVEH Module before middle B4999 PVPX Module before B4998 PVBZ PVBZ with POC 57B6989 PVSP Priority module 57B5999 Danfoss October 208 AX en

106 PVG 32 PVE series 4 PVEO PVEO exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVEO part kits Type Description Code number PVEO x4 DEUTSCH 2 V 57B429 x4 DEUTSCH 24 V 57B4292 x4 AMP 2 V 57B490 x4 AMP 24 V 57B4902 x4 AMP 24 V (anodized) 57B4272 x4 DIN 2 V 57B426 x4 DIN 24 V 57B4228 x4 DIN 2 V (anodized) 57B4266 x4 DIN 24 V (anodized) 57B4268 PVEO-R x4 DEUTSCH 2 V x4 DEUTSCH 24 V x4 AMP 2 V 57B4903 x4 AMP 24 V 57B4904 x4 AMP 24 V (anodized) 57B4274 x4 DIN 2 V 57B427 x4 DIN 24 V 57B4229 PVEO-DI x4 AMP 2 V x4 AMP 24 V PVEO parts list Item Description Code number Amount Screw Seal kit 57B Danfoss October 208 AX en-0000

107 PVG 32 PVE series 4 PVEA PVEA exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVEA part kits Type Description Code number PVEA x4 DEUTSCH active 57B4792 x4 DEUTSCH - passive x4 AMP - active 57B4734 x4 AMP - passive 57B4735 x4 AMP (anodized) 57B4775 PVEA-DI 2x4 DEUTSCH active 57B4796 2x4 AMP active 57B4736 2x4 AMP passive 57B4737 PVEA-NP x6 DEUTSCH - active PVEA parts list Item Description Code number Amount Screw Seal kit 57B3999 Danfoss October 208 AX en

108 PVG 32 PVE series 4 PVEM PVEM exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 Type Description Code number PVEM x4 DIN 2 V 57B46 x4 DIN 24 V 57B428 PVEM-FLB x4 DIN 2 V 57B446 x4 DIN 24 V 57B4428 PVEM-R x4 DIN 2 V 57B456 x4 DIN 24 V 57B4528 Item Description Code number Amount Screw Seal kit 57B Danfoss October 208 AX en-0000

109 PVG 32 PVE series 4 PVEP PVEP exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVEP kit Description Code number x6 DEUTSCH - active PVEP parts list Item Description Code number Amount Screw Seal kit 57B3999 Danfoss October 208 AX en

110 PVG 32 PVE series 4 PVEU PVEU exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVEU kits Description Code number x4 DEUTSCH - passive x4 AMP - active x4 AMP active 57B4044 x4 AMP passive 57B4045 PVEU parts list Item Description Code number Amount Screw Seal kit 57B Danfoss October 208 AX en-0000

111 PVG 32 PVE series 4 PVEH PVEH exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVEH part kits Type Description Code number PVEH x4 DEUTSCH active 57B4092 x4 DEUTSCH - passive 57B4093 x4 AMP active 57B4034 x4 AMP passive 57B4035 x4 AMP active (anodized) 57B4074 x4 AMP passive (anodized) 57B4075 x4 DIN active 57B4032 x4 DIN passive 57B4033 x4 DIN active (anodized) 57B4073 PVEH-FLA x6 DEUTSCH - active 57B4398 x6 AMP - active 57B4338 PVEH-FLB x6 DEUTSCH - passive 57B4392 x6 DIN - active 57B4332 PVEH-DI 2x4 DEUTSCH active 57B4096 2x4 AMP - active 57B4036 2x4 AMP - passive 57B4037 PVEH-NP x6 DEUTSCH - active Item Description Code number Amount Screw Seal kit 57B3999 Danfoss October 208 AX en-0000

112 PVG 32 PVE series 4 PVES PVES exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVES kits Type Description Code number PVES x4 DEUTSCH active 57B4892 x4 DEUTSCH - passive x4 DEUTSCH active (Fast-no memory) 57B4894 x4 AMP active 57B4834 x4 AMP passive 57B4835 x4 AMP passive (anodized) 57B4865 x4 DIN active 57B4832 x4 DIN passive 57B4833 PVES-SP x6 DEUTSCH - passive PVES parts list Item Description Code number Amount Screw Seal kit 57B Danfoss October 208 AX en-0000

113 PVG 32 PVED-CC series 5 PVED-CC exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVED-CC kits Type Description Code number PVED-CC 2x4 DEUTSCH ISObus Spare parts for DEUTSCHconnector Spare parts for AMPconnector 2x4 AMP ISObus x4 DEUTSCH CANopen x4 AMP CANopen m cable m loop cable m loop cable m loop cable CAN bus terminator m cable with gray connector 57B m cable with black connector 57B m loop cable 57B m loop cable CAN bus terminator with gray connector CAN bus terminator with black connector 57B4988 PVED-CC parts list Item Description Code number Amount Screw Seal kit 57B3999 Danfoss October 208 AX en

114 PVG 32 PVE series 7 PVEO PVEO exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVE 7 PVEO part kits Type Description Code number PVEO x4 DEUTSCH 2 V x4 DEUTSCH 24 V x4 AMP - 2 V x4 AMP - 24 V x4 DIN - 2 V x4 DIN - 24 V PVEO-R x4 DEUTSCH 2 V x4 DEUTSCH 24 V x4 AMP - 2 V x4 AMP - 24 V x4 DIN - 2 V 6683 x4 DIN - 24 V PVEO-DI 2x4 AMP 2 V x4 AMP 24 V Item Description Code number Amount Screw Seal kit 57B Danfoss October 208 AX en-0000

115 PVG 32 PVE series 7 PVEO-HP PVE series 7 PVEO-HP exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVEO-HP kits Description Code number x4 DEUTSCH 2 V x4 DEUTSCH 24 V x4 AMP - 2 V x4 AMP - 24 V x4 DIN - 2 V 8755 x4 DIN - 24 V Parts list Item Description Code number Amount Screw Seal kit 57B3999 Danfoss October 208 AX en

116 PVG 32 PVE series 7 PVEM PVEM exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVE series 7 PVEM kits Type Description Code number PVEM x4 DIN passive PVEM-FLB x4 DIN passive PVEM-R x4 DIN passive PVEM-Q x4 DIN passive Parts list Item Description Code number Amount Screw Seal kit 57B Danfoss October 208 AX en-0000

117 PVG 32 PVE series 7 PVEA PVEA exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVEA kits Type Description Code number PVEA x4 DEUTSCH - active x4 DEUTSCH - passive x4 AMP active x4 AMP passive PVEA-NP x6 DEUTSCH active PVEA-DI 2x4 DEUTSCH passive x4 AMP active x4 AMP passive Parts list Item Description Code number Amount Screw Seal kit 57B3999 Danfoss October 208 AX en

118 PVG 32 PVE series 7 PVEH PVEH exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVEH kits Type Description Code number PVEH x4 DEUTSCH - passive x4 DEUTSCH - active x4 AMP passive x4 AMP active 6688 x4 DIN passive x4 DIN active 6687 PVEH-U x4 AMP passive x4 AMP active 6682 x4 DIN passive x4 DIN active PVEH-FLB x4 DEUTSCH passive x4 DEUTSCH active x4 DIN active PVEH-FLA x6 DIN active 6684 x6 AMP passive x6 AMP active PVEH-SP x6 DEUTSCH active PVEH-NP x6 DEUTSCH fast active PVEH-DI 2x4 DEUTSCH active x4 AMP passive x4 AMP active 6689 Parts list Item Description Code number Amount Screw Seal kit 57B Danfoss October 208 AX en-0000

119 PVG 32 PVE series 7 PVES PVES exploded view 5 [0.2] 8 ± 0.5 Nm [70 ± 4.4 lbf in] 2 PVES kits Type Description Code number PVES x4 DEUTSCH - passive x4 DEUTSCH - active x4 AMP passive x4 AMP active x4 DIN passive x4 DIN active PVES-U x4 DEUTSCH passive x4 AMP active PVES-SP x6 DEUTSCH - passive Parts list Item Description Code number Amount Screw Seal kit 57B3999 Danfoss October 208 AX en

120 PVG 28/256 service parts PVPV exploded view PVG 28/256 pump side module, PVPV 2 35±5Nm [30±44lbf in] 5±Nm [44±9lbf in] 3 30±3Nm [265±27lbf in] 35±5Nm [30±44lbf in] 4 30±3Nm [265±27lbf in] 35±3Nm [30±27lbf in] 3[0.50] PVPV kits Description Measure Code number Letter Closed center with pilot supply for electrical actuation, pilot gage port, and facility for pilot shut off Closed center with pilot supply for hydraulic actuation, pilot gage port, and facility for pilot shut off Metric flange 7330 A G-/2" BSP SAE flange 7669 Thread ports -7/8 UNF Metric flange B G-/2" BSP SAE flange 787 Thread ports -7/8 UNF 789 Parts list Item Description Code numbers Letter Pilot pressure reducing valve - 2 PVPP 2V PVPP 24V 6039 A B 20 Danfoss October 208 AX en-0000

121 Parts list (continued) Item Description Code numbers Letter 3 Plug if no PVPP is mounted - 4 Shock and anti-cavitation Valve See PVLP/PVLA 2 2 A B Danfoss October 208 AX en

122 PVB 28, basic module PVB exploded view 35±3Nm [30±27lbf in] 3[0.50] 2 35±3Nm [30±27lbf in] 3[0.50] 3 20±3Nm [77±27lbf in] 4 20±3Nm [77±27lbf in] E W Warning Risk of leak The module will leak if the flange mount screws are not properly secured. Flange mount screws according to ISO PVB 28 kits Description Measure Code number Letter Compensated basic module Metric flange A G-/2" BSP SAE flange Thread ports -7/8 UNF Compensated basic module with LSA/B relief valve for each work port Metric flange 7695 B Compensated basic module with LSA/B relief valve for each work port and 2xPVLPs for each work port G-/2" BSP 7698 SAE flange 7696 Thread ports -7/8 UNF 7697 Metric flange 6562 C G-/2" BSP SAE flange Thread ports -7/8 UNF Danfoss October 208 AX en-0000

123 Parts list Item Description Code number Letter A B C and 2 Shock and anti-cavitation Valve See PVLP/PVLA LS relief valve 55L LS relief valve service tool 55L Danfoss October 208 AX en

124 PVB 256, Basic Module PVB 256 exploded view 35±3Nm [30±27lbf in] 3[0.50] 2 35±3Nm [30±27lbf in] 3[0.50] 3 20±3Nm [77±27lbf in] 4 20±3Nm [77±27lbf in] E PVB 256 kits Description Measure Code number Letter Compensated basic module Metric flange A G-/2" BSP SAE flange Thread ports -7/8 UNF Compensated basic module with LSA/B relief valve for each work port Metric flange 705 B Compensated basic module with LSA/B relief valve for each work port and 3xPVLPs for each work port Turbo compensator feature basic module with LS A/B relief valve for each work port and 3xPVLPs for each work port G-/2" BSP 7707 SAE flange 7706 Thread ports -7/8 UNF 7709 Metric flange C G-/2" BSP 6925 SAE flange Thread ports -7/8 UNF 7708 Metric flange D G-/2" BSP SAE flange Thread ports -7/8 UNF Danfoss October 208 AX en-0000

125 Item Description Code number Letter A B C D and 2 Shock and anti-cavitation Valve See PVLP/PVLA LS relief valve 55L LS relief valve service tool 55L Danfoss October 208 AX en

126 PVLP Shock and PVLA, Suction Valves 35±3 Nm [30±27 lbf in] 3 [0.50] 35±3 Nm 2 [30±27 lbf in] 3 [0.50] Type Part number PVLP/PVLA PVLA 57B200 PVLP 57B B B B B200 57B225 57B240 57B250 57B260 57B275 57B290 57B220 57B B B B B B B B B2380 Plug 57B2002 Part number: 57B Danfoss October 208 AX en-0000