Grosvenor Plus 138 decorative Solid brass highly polished, with rope-edge detail Pre-treated heat-cured powder lacquer finish Total safety

Transcription

1 38 Grosvenor Plus wiring devices decorative range introduction feature benefits Grosvenor Plus stylish solid brass and elegant rope-edge detail combine in an extensive range exclusively designed for traditional appeal. Manufactured from the finest materials and sealed with a pre-treated, heat-cured powder lacquer ensures Grosvenor Plus products maintain their appearance and makes them very durable and tarnish resistant, ideal for both public and domestic surroundings. Solid brass highly polished, with rope-edge detail Providing a range of products that complement the décor of the finest modern and traditional interiors Pre-treated heat-cured powder lacquer finish Ensures that the range is durable, tarnish resistant and maintains its stylish and understated appearance for many years and eliminates the need for a gasket Total safety 3-pin operated child resistant shutter system, which is designed to inhibit access to the electricity supply, unless all 3 pins of a standard British 3 Amp plug are in position Comprehensive range of sockets, switches and ancillary products Whatever the application, the Grosvenor Plus range has a wiring device to suit

2 Grosvenor Plus 39 technical hotline +44 (0) decorative wiring devices PRE-TREATED HEAT-CURED POWDER LACQUER FINISH Ensures that the range is durable and tarnish resistant and eliminates the requirement for a gasket MANUFACTURED FROM SOLID BRASS MATCHING SCREWS OPTIONAL INSERTS Choice of white or black inserts, or black inserts with matching metal rocker switches. Double Pole Switching. 3-PIN CHILD RESISTANT SHUTTER SYSTEM Designed to inhibit access to the electricity supply, unless all 3 pins of a standard British 3 Amp plug are in position STYLISH DESIGN Elegant and traditional rope-edge design Terminal screws are backed out and captive and terminals are upwards facing to make installation easier. Funnel entrance to terminals. Clear terminal markings for easy identification. Heat-cured powder lacquer finish. Ensures that the ranges are durable, tarnish resistant and maintain their stylish and understated appearance for many years. The elegant rope-edge finish is Ideal for traditional décor.

3 40 Grosvenor Plus wiring devices decorative Switchsocket Outlets Socket Outlets 3 AMP 3 AMP NON STANDARD 5 AMP 3 AMP RCD PROTECTED 2 AMP, 5 AMP AND 5 AMP 6 AMP MODULAR FORMAT K4357 POB K268 POB K6306 POB K4380 POB K82 POB / K583 WHI K4357 POB CB K268 POB B K438 POB K84 POB / K583 BLK K4347 POB K4383 POB K228 POB B K433 POB / K490 WHI K4347 POB CB K4383 POB CB K2282 POB K433 POB / K490 BLK K4357 POB K4357 POB B K4357 POB CB GANG DP 3 AMP DUAL EARTH TERMINALS K4347 POB K4347 POB B K4347 POB CB 2 GANG DP 3 AMP 25mm GANG: 86 ZIC 2 GANG: 862 ZIC 35mm (for extra wiring space) GANG: 866 ZIC 2 GANG: 886 ZIC High integrity earthing. K4357 is fitted with two earth terminals to provide a double earth facility when installations are to comply with Section 607 of BS.767, IEE Wiring Regulations gang: 2 gang: 87.5 x 49.5mm gang: 60.3mm 2 gang: 20.6mm BS.363 Pt. 2: 995 K268 POB K268 POB B K268 POB CB GANG DP 3 AMP NON STANDARD WITH CLEAN EARTH FACILITY K4383 POB K4383 POB B K4383 POB CB GANG DP 5 AMP B as a suffix on the list number denotes BLACK INSERTS C denotes METAL ROCKER CAP 25mm 86 ZIC 35mm (for extra wiring space) 866 ZIC K268 has facility for clean earth connection and is suitable for nonstandard plugs with T shaped earth pins. See page mm BS.363 Pt. 2: 995, where relevant (3A) BS.546: 950 (5A) K6306 POB GANG 30mA RATED TRIPPING CURRENT ACTIVE CONTROL CIRCUIT : 886 ZIC Boxes must have a minimum depth of 35mm K6306 is pulsating d.c. and a.c. fault current sensitive Only suitable for supply voltage of 240V a.c., 50Hz. Earth pin operated shutter x 49.5mm 20.6mm For Active/Passive definition see page 260 BS.7288: 990 K4380 POB K4380 POB B 2 AMP SHUTTERED K438 POB K438 POB B 5 AMP SHUTTERED K228 POB K228 POB B GANG SHUTTERED 5 AMP 27V K2282 POB K2282 POB B 2 GANG SHUTTERED 5 AMP 27V 25mm gang: 86 ZIC 2 gang: 862 ZIC 35mm (for extra wiring space) gang: 866 ZIC 2 gang: 886 ZIC gang: 2 gang: 87.5 x 49.5mm gang: 60.3mm 2 gang: 20.6mm BS.546: 950 (Round Pin) SSA 444: 985 (5A 27V) K82 POB with K583 WHI/BLK GANG 6 AMP 250V SHUTTERED GERMAN TYPE (2P+E) SOCKET K84 POB with 2 x K583 WHI/BLK 2 GANG 6 AMP 250V SHUTTERED GERMAN TYPE (2P+E) SOCKETS K433 POB with K490 WHI/BLK and K370 Grid GANG 6 AMP 25/250V SHUTTERED UNIVERSAL SOCKET P+E SOCKETS 35mm: GANG: 866 ZIC 2 GANG: 886 ZIC gang: 2 gang: 87.5 x 49.5mm IEC : 2002 UNIVERSAL SOCKET BS.5733: 995 MOUNTING BOX 35mm 866 ZIC 87.5 x 87.5 The universal socket does not incorporate an earth contact. Therefore, appliances needing earth connection (class equipment) must NOT be used with this socket. The socket is intended for use with BS, USA and CEE standard plugs.

4 Grosvenor Plus 4 technical hotline +44 (0) decorative wiring devices Shaver Supply Units Connection Units DP Switches Cooker Switches Plateswitches 32 AMP AND 45 AMP 45 AMP DP MAIN SWITCH AND 3 AMP SWITCH SOCKET OUTLET WITH NEONS 0 AMP WIDE ROCKER 0 AMP K436 POB K526 POB K4305 POB K437 POB K473 POB K704 POB K436 POB B K526 POB B K4372 POB B K473 POB B K4336 POB K70 POB B K497 POB K4373 POB K4732 POB K497 POB B K4336 POB B K4732 POB B K704 POB K704 POB B DUAL VOLTAGE 5/230 VOLT OUTPUT (220/240 VOLT 50/60HZ INPUT) K70 POB K70 POB B DUAL VOLTAGE 5/230 VOLT OUTPUT (20/30 VOLT 50/60Hz INPUT) : 878 ZIC This design incorporates a double wound isolating transformer rated 20VA at 230 or 5 volts it meets BS.3535: 996 making it safe for use in bathrooms. Insertion of a shaver plug automatically switches on by energising the primary side of the isolating transformer removal automatically switches off. The transformer is protected against overload by an automatic solid state overload device with automatic resetting x 87.5mm 20.6mm BS EN : 998 K436 POB K436 POB B DP SWITCHED WITH NEON K497 POB K497 POB B DP SWITCHED WITH FLEX OUTLET AND NEON : 866 ZIC All units are fitted with a 3amp fuse (to BS.362) TERMINAL CAPACITY 2 x 6mm 2 stranded (max) 60.3mm BS. 363 Pt 4: 995 K4305 POB K4305 POB B 32 AMP DP SWITCH WITH NEON K4336 POB K4336 POB B 45 AMP DP SWITCH WITH NEON K4305 : 866 ZIC (6mm 2 conductors) 877 ZIC (0mm 2 conductors) K4336 : 886 ZIC (6mm 2 conductors) 878 ZIC (0mm 2 conductors) 60.3mm BS EN 60669: 2000 Fitted with an earth terminal. These products are NOT recommended for switching large banks of PCs. K526 POB K526 POB B COOKER SWITCH : 886 ZIC (Up to 6mm 2 conductor) 878 ZIC (Up to 0mm 2 conductor) Rotary operated shutter. 86 x 46mm 20.6mm BS.477: 992 K437 POB CB K437 POB K437 POB B GANG SP TWO-WAY K4372 POB K4372 POB B 2 GANG SP TWO-WAY K4373 POB K4373 POB B 3 GANG SP TWO-WAY K4379 POB CB 2 GANG SP TWO-WAY WITH SEPARATED SWITCHES : 3995 ZIC These switches do not have to be derated when used with fluorescent or inductive loads. Switches can be wired as either one-way or two-way x 87.5mm 60.3mm BS EN : 2000 K473 POB K473 POB B GANG SP TWO-WAY WIDE ROCKER K4732 POB K4732 POB B 2 GANG SP TWO-WAY WIDE ROCKER B suffix on the list number denotes BLACK INSERTS C denotes METAL ROCKER CAP

5 42 Grosvenor Plus wiring devices decorative Standard Dimmer Switches 230V a.c. 50Hz TUNGSTEN FILAMENT Intelligent Dimmer Switches 230V a.c. 50Hz TUNGSTEN FILAMENT AND LOW VOLTAGE Dimmer Switches V a.c. 50Hz or 60Hz 27V a.c. 60Hz Blank Plates TV/FM Coaxial Satellite Socket Outlets K4306 POB K4306 POB LV K54 POB K73 POB K4330 POB K4320 POB K4307 POB K4307 POB LV K63 POB K74 POB K4329 POB K432 POB B K4308 POB K430 POB LV K64 POB K76 POB K4322 POB K430 POB K4302 POB LV K66 POB K4325 POB K4306 POB GANG TWO WAY SINGLE 40W min, 250W max K4307 POB GANG TWO WAY DOUBLE 40W min, 250W max for each dimmer K4308 POB 2 GANG TWO WAY TRIPLE 40W min, 250W max for each dimmer K430 POB GANG TWO WAY SINGLE 75W min, 500W max K4302 POB 2 GANG TWO WAY DOUBLE 60W min, 450W max for each dimmer Conforming to the latest standards BS EN and BS EN 5505, they are overload protected and are suitable for use with tungsten filament lamps only. Two way dimmers use push on/push off switches. Only one dimmer switch can be used in a two-way switching circuit. They are not suitable for use with fluorescent loads, electronic transformers or wire-wound transformers in low voltage lighting systems K4306 POB LV GANG TWO WAY SINGLE 40W/VA min, 300W/240VA max K4307 POB LV GANG TWO WAY DOUBLE 40W/VA min, 300W/240VA max for each dimmer MIN. BOX DEPTH - 35mm K430 POB LV GANG TWO WAY SINGLE 60W/VA min, 500W/400VA max K4302 POB LV 2 GANG TWO WAY DOUBLE 60W/VA min, 450W/360VA max for each dimmer Conforming to the latest standards BS EN and BS EN 5505, they use state of the art micro controller based circuitry to provide soft start and overload protection. The soft start feature helps in greatly prolonging the life of tungsten, normal or halogen lamps. Suitable for use with good quality electronic or wire wound transformers. Can also be used with good quality mains voltage halogen lamps incorporating GU0 bases. Please check with lamp manufacturer to determine suitability. Not suitable for use with fluorescent loads. K53 POB GANG SINGLE ONE WAY W 50Hz K54 POB GANG SINGLE ONE WAY W 50Hz K56 POB GANG SINGLE TWO WAY W 50Hz K63 POB GANG SINGLE ONE WAY W 60Hz K64 POB GANG SINGLE ONE WAY W 60Hz K66 POB GANG SINGLE TWO WAY W 60Hz FOR DIMMERS : gang: 86 ZIC 25mm deep min 866ZIC - 35mm deep min for K4307 POB LV 2 gang: 862 ZIC 25mm deep min gang: 86 x 86mm 2 gang: 86 x 46mm gang: 60.3mm 2 gang: 20.6mm K73 POB GANG SINGLE ONE WAY W K74 POB GANG SINGLE TWO WAY W K76 POB 2 GANG SINGLE TWO WAY W Conforming to relevant parts of BS 558, these dimmers are suitable for use with tungsten filament lamps only. NOTE: Dimmer switches specified to work at 50Hz are not really suitable for use at 60Hz and vice versa. The one way dimmers use rotary on/off switches, while the two way dimmers use push on/push off switches. These dimmer switches are not suitable for use with fluorescent loads, electronic or wire-wound transformers in low voltage lighting systems K4330 POB GANG K4329 POB 2 GANG gang: 2 gang: 87.5 x 49.5mm gang: 60.3mm 2 gang: 20.6mm BS. 5733: 995 K4320 POB K4320 POB B SINGLE OUTLET (NON ISOLATED) K432 POB K432 POB B SINGLE OUTLET (ISOLATED) K4322 POB K4322 POB B TWIN OUTLET WITH FM/TV DIPLEXER (ISOLATED) K4325 POB K4325 POB B SINGLE OUTLET F TYPE SATELLITE SOCKET : 86 ZIC K4320, K4325 Single outlet for connection to a single TV or FM co-axial aerial lead. K432, K4322 Provides safety isolation rated at 2000Va.c. between aerial lead and socket. Single outlet for connection to a single TV or FM co-axial aerial lead. Twin outlet with TV/FM diplexer for connection to single co-axial aerial lead with combined TV & FM signals. Suitable for UHF TV and VHF FM radio. 60.3mm IEC 69-2: 965 BS. 5733: 995 where applicable

6 Grosvenor Plus 43 technical hotline +44 (0) decorative wiring devices Telephone Socket Outlets Euro Data and LJU6C Data Frontplates Power Modules MK Modular Data Frontplates Grid Plus Frontplates K4340 POB K82 POB K5830 WHI K5833 WHI K409 POB K4340 POB B K84 POB K583 WHI K5834 WHI K4092 POB K4352 POB K72 POB K5832 WHI K4093 POB K4333 POB K4094 POB K4334 POB K4340 POB K4340 POB B 3 PIN SOCKET OUTLET WITH TELEPHONE SYMBOL SINGLE OUTLET : 86 ZIC Accepts standard BS amp 2 pin + earth plug where 2 pins are used for telephone circuits and the earth pin is used to ensure correct polarity x 87.5mm 60.3mm BS. 5733: 995 where applicable B suffix on the list number denotes BLACK INSERTS EURO K82 POB EURO 2 MODULE K84 POB EURO 4 MODULE LJU6C K72 POB LJU6C 2 MODULE Suitable for flush boxes to BS.4662: 970 and surface boxes to BS.5733: 995 Refer to appropriate data module for minimum box depth. For the complete selection of data frontplates and modules see pages gang: 60.3mm 2 gang: 20.6mm BS.5733: 995 where applicable Note: No grid required, modules just clip into place. Fully screened modular TV/satellite outlets are also available to fit Euro frontplates. See page 3 5 K5830 WHI 0 K5830 BLK 0 UK EURO 2 MODULE 3 AMP 250V SHUTTERED K583 WHI 0 K583 BLK 0 GERMAN 2P+E 6 AMP 250V SHUTTERED EURO 2 MODULE K5832 WHI 0 K5832 BLK 0 AMERICAN 5 AMP 27V SHUTTERED EURO 2 MODULE K5830 MOUNTING BOX: 25mm 35mm (for extra wiring space) 50 x 50mm BS. 363: Part 2: 995 K583 MOUNTING BOX: 46mm 50 x 50mm IEC : 2002 K5832 MOUNTING BOX: 25mm 35mm (for extra wiring space) 50 x 50mm SSA.444: 985 K5833 WHI 0 K5833 BLK 0 UK GANG EURO 2 MODULE 5 AMP 250V SHUTTERED K5834 WHI 0 K5834 BLK 0 FRENCH/BELGIAN 2P+E 6 AMP 250V SHUTTERED EURO 2 MODULE K5833 MOUNTING BOX: 25mm 35mm (for extra wiring space) 50 x 50mm BS 546: 950 K5834 MOUNTING BOX: 46mm 50 x 50mm NF C6-34 K409 POB GANG ONE MODULE K4092 POB GANG TWO MODULE K4093 POB 2 GANG THREE MODULE K4094 POB 2 GANG FOUR MODULE 35mm (for extra wiring space) GANG: 866 ZIC 2 GANG: 886 ZIC See Pages 46 and for appropriate data modules and mounting frames. gang: 2 gang: 87.5 x 49.5mm gang: 60.3mm 2 gang: 20.6mm BS.5733: 995 where applicable Note: Require appropriate grid. K433 POB MODULE K4332 POB 2 MODULE K4333 POB 3 MODULE K4334 POB 4 MODULE K4346 POB 6 MODULE K4348 POB 8 MODULE K4352 POB 2 MODULE & 2 module: 3 & 4 module: 87.5 x 49.5mm 6 & 8 module: 49.5 x 49.5mm 2 module: 208 x 49.5mm See pages for the appropriate switch modules. For modules with black inserts and brass capped rocker choose PBR modules on pages BS.5733: 995