DIMMERS - TRAILING EDGE

Transcription

1 DIMMER - TRAIIG EDGE These quiet grid modules can be used to dim lights from several locations. They are suitable for dimming mains and/or dimmable transformer low voltage lamps. Pressing the button dims or brightens the light to any level. A quick press es off. Another press returns the lamp softly to its previous brightness. All versions are suitable for dimming most mains dimmable ED lamps and fittings and mains halogen lamps. Quiet operation oft start feature prolongs the lamp life. ome ED lamps may require a small resistive (order code REOADE, see page 57) to enable smooth dimming. Multi-way ing and dimming can be achieved from any position by using the complementary DAER es. These grid modules fit any position on the appropriate grid or plate system. PECIFICATIO Operation: Push on, push off, hold to dim Dimensions: Module for MK Grid Plus: 59 x x 34mm Minimum wall box depth of 35mm Dimensions: Module for Crabtree grid: 5 x x mm Minimum wall box depth of 40mm Dimensions: Module for Eurodata plates: 50 x 25 x mm Minimum wall box depth of 35mm OADIG ee tables on page 69 for minimum and maximum s For ing of Grid s on multi-gang plates the following limits also apply: 2 gang: Maximum for total plate 630W 3 or 4 gang: Maximum for total plate 000W 6, 8, 9 or 2 gang: Maximum per row 000W 8 or gang: Maximum per row 200W 5 YEAR WARRATY - MADE I THE U.K. A. Dimensions in mm B. Dimensions in mm C. Dimensions in mm DQDGD MK400W - uitable for MK Grid Plus DQDGD CB400W - uitable for Crabtree grid DQDGD EU400W - uitable for Eurodata plates 68

2 DIMMER - TRAIIG EDGE DAER PRODUCT ORDER CODE REITIE, MAI HAOGE OR DIMMABE EECTROIC TRAFORMER OAD Minimum Maximum DIMMABE WIRE-WOUD OR TOROIDA TRAFORMER IDUCTIE OAD Minimum Maximum ED AMP AD FITTIG* Minimum Maximum WA BOX DIMEIO DIAGRAM DQDGD MK400W 40W 400W ot suitable ot suitable 0W* 200W* 35mm A DQDGD CB400W 40W 400W ot suitable ot suitable 0W* 200W* 40mm B DQDGD EU400W 40W 400W ot suitable ot suitable 0W* 200W* 35mm C * PEAE OTE Due to the characteristics and ever changing design of different lamp manufacturers ED drivers, DAER cannot specify a universal accurate maximum / minimum. The 0W minimum published above is at the higher end of the minimum value range. However, with some manufacturers lamps, the minimum can be as low as 4W. The use of DAER REOADE (see page 57) can help to eliminate lamp instability in many ED lamps and fittings. 2-way and intermediate wiring can be used with DAER Quiet grid s (see page 75 for wiring diagrams) however all 2-way and intermediate es must be changed to DAER lave es G or _. 69. Wiring diagrams -way ing and dimming Example of an existing 2-way circuit Quiet grid resistive (Order code: REOADE) augmenting the, should ED lamp instability occur. Quiet grid and a lave replacing existing 2-way es Multi-way ing and dimming (lights can be ed and dimmed from any position) DAER Quiet grid resistive (Order code: REOADE) augmenting the, should ED lamp instability occur. DAER DAER Quiet grid Telephone: +44(0)

3 ED DIMMER - EADIG EDGE These leading edge push s are compatible with many mains dimmable ED lamps and fittings. The range includes, 2, 3 and 4 gang options in a white polycarbonate moulded plate and a module (DPD ED). DPD ED is ideal to retrofit onto many existing wall plates or can be fitted onto Original Equipment Manufacturers own plates. Each has an adjusted spindle on the back of the product to specify the minimum dim level to help eliminate lamp instability. Each includes a thermal fuse for short circuit protection. PECIFICATIO Operation: Push on/off ing, with rotary dimming control. Can be used in -way or 2-way ing circuits. Dimensions: DPD ED module: 25 x 59 x 30mm Wall box depth 35mm Dimensions: quare plates: x x 2mm Wall box depth 35mm Dimensions: Rectangular plates: 46 x x 2mm Wall box depth 35mm OADIG ee tables on page 73 for minimum and maximum s 5 YEAR WARRATY - MADE I THE U.K. A. Dimensions in mm B. Dimensions in mm DPD ED DPD ED DP2D ED pindle Ø = 6mm ( gang illustrated) C. Dimensions in mm DP3D ED DP4D ED 46 2 (4 gang illustrated) 70

4 ED DIMMER - EADIG EDGE DAER PRODUCT ORDER CODE UMBER OF GAG FORMAT MIIMUM WATTAGE ED AMP AD FITTIG MAXIMUM WATTAGE ED AMP AD FITTIG WA BOX DIMEIO DIMEIO DIAGRAM DPD ED Module 5W* 250W 35mm 25 x 59 x 30mm A DPD ED Plated 5W* 250W 35mm x x 2mm B DP2D ED 2 Plated 5W* 250W / gang 35mm x x 2mm B DP3D ED 3 Plated 5W* 250W / gang 35mm 46 x x 2mm C DP4D ED 4 Plated 5W* 250W / gang 35mm 46 x x 2mm C * PEAE OTE: 5W is the optimum minimum on ED lamps tested by DAER. However due to the variable nature of ED lamp drivers we cannot guarantee 5W is the minimum with A ED lamps and fittings. The adjustable spindle on these s can help to eliminate lamp instability in many ED lamps and fittings. The use of DAER REOADE (see page 57) can also help to eliminate lamp instability in many ED lamps and fittings. 7. Wiring diagrams Existing intermediate circuit Either of the 2-way es can be replaced: Or: Alternative intermediate circuit Either of the 2-way es can be replaced: Or: Telephone: +44(0)

5 EADIG EDGE DIMMER These leading edge s are compatible with tungsten s, mains halogen lamps and dimmable low voltage transformer s. A range of white polycarbonate plated s with elegant styling. Dim lights to any brightness. All versions are suitable for mains halogen lamps without the need for derating. Mains halogen lamps must have an integral thermal safety fuse. PECIFICATIO Rotary s: Rotary on/off ing, with rotary dimming control. -way only Push s: Push on, push off, with rotary dimming control. or 2-way ing Push : Push on, push off. or 2-way ing Dimensions: quare plates: x x 2mm ee tables on page 73 for wall box depths Dimensions: Rectangular plates: 46 x x 2mm ee tables on page 73 for wall box depths OADIG ee tables on page 73 for minimum and maximum s 5 YEAR WARRATY - MADE I THE U.K. quare plated es - Dimensions in mm quare plated es 2 ( gang illustrated) Rectangular plated es - Dimensions in mm Rectangular plated es 46 2 (4 gang illustrated) 72

6 EADIG EDGE DIMMER Tungsten rotary s, -way uitable for resistive s. uitable for mains halogen lamps. (Mains halogen lamps must have an integral thermal safety fuse.) UMBER OF GAG ORDER CODE MI. WATTAGE MAX. WATTAGE MAX. O. OF TRAFORMER WA BOX DIMEIO DRD 250W 40W 250W - 6mm x x 2mm DRD 400W 60W 400W - 6mm x x 2mm WIRIG DIAGRAM() DR2D 250W 40W/gang 250W/gang - 6mm x x 2mm Tungsten push s, 2-way uitable for resistive s. uitable for mains halogen lamps. (Mains halogen lamps must have an integral thermal safety fuse). DPD 250W 40W 250W - 6mm x x 2mm DPD 400W 60W 400W - 6mm x x 2mm DPD 630W 60W 630W - 40mm x x 2mm DPD 000W 60W 000W - 25mm 46 x x 2mm 2 DP2D 250W 40W/gang 250W/gang - 6mm x x 2mm 3 DP3D 250W 40W/gang 250W/gang - 6mm 46 x x 2mm DP4D 250W 40W/gang 250W/gang - 6mm 46 x x 2mm ow voltage push s, 2-way For dimmable wire-wound transformer inductive s. DPD 250WI 60W 250W 6 6mm x x 2mm 73. DPD 400WI 60W 400W 8 40mm x x 2mm 73.2 DPD 630WI 60W 630W 2 25mm 46 x x 2mm DP2D 60WI 40W/gang 60W/gang 4/gang 6mm x x 2mm 73.5 ow voltage push s, 2-way For dimmable electronic transformer s. DPD 250WIET 60W 250W 4 6mm x x 2mm DPD 400WIET 60W 400W 6 6mm x x 2mm DPD 630WIET 60W 630W 8 40mm x x 2mm DPD 000WIET 60W 000W 2 25mm 46 x x 2mm 2 DP2D 250WIET 40/gang 250W/gang 4/gang 6mm x x 2mm 3 DP3D 250WIET 40/gang 250W/gang 4/gang 6mm 46 x x 2mm DP4D 250WIET 40/gang 250W/gang 4/gang 6mm 46 x x 2mm Push, 2-way On/off to match Rotary and Push ranges. or 2-way ing. DP 500W 0W 500W /A 6mm x x 2mm - Wiring diagrams way ing and dimming Intermediate circuit Intermediate circuit (alternative) Dimming circuits with 2-way ing. The lights can be ed on and off and dimmed at the. At the other the lights can only be ed on and off at the brightness level which is set by the Telephone: +44(0)

7 OFT TART DIMMER - EADIG EDGE These s can be used to dim lights from several locations. They are suitable for dimming resistive lamps or dimmable transformer low voltage lamps. Pressing the button dims or brightens the light to any level. A quick press es off. Another press returns the lamp softly to its previous brightness. oft start feature prolongs the lamp life Multi-way ing and dimming can be achieved from any position only by using the complementary DAER es. These s can also be used to control the speed of fans and motors. These s automatically off in the event of transformer malfunction, helping to protect the and the transformer. All versions are suitable for mains halogen lamps* without the need for derating *Mains halogen lamps must have an integral thermal safety fuse. PECIFICATIO Plated versions: Grid modules: Dimensions: Push on, push off, hold to dim. Push on, push off, hold to dim. quare plates: x x 2mm Dimensions: Module for MK Grid Plus: 59 x x 34mm Minimum wall box depth of 35mm Dimensions: Module for Crabtree grid: 5 x x mm Minimum wall box depth of 40mm Dimensions: Module for Eurodata plates: 50 x 25 x mm Minimum wall box depth of 35mm OADIG ee tables on page 75 for minimum and maximum s For ing of Grid s on multi-gang plates the following limits also apply: 2 gang: Maximum for total plate 630W 3 or 4 gang: Maximum for total plate 000W 6, 8, 9 or 2 gang: Maximum per row 000W 8 or gang: Maximum per row 200W 5 YEAR WARRATY - MADE I THE U.K. A. Dimensions in mm B. Dimensions in mm DD 250W, DD 400W, and 2 2 DGD MK400W and G MK - uitable for MK Grid Plus C. Dimensions in mm gang versions illustrated D. Dimensions in mm DGD CB400W and G CB - uitable for Crabtree grid DGD EU400W and G EU - uitable for Eurodata plates

8 OFT TART DIMMER - EADIG EDGE oft start s DAER PRODUCT ORDER CODE DD 250W DD 400W REITIE, MAI HAOGE OR DIMMABE EECTROIC TRAFORMER OAD DIMMABE WIRE-WOUD OR TOROIDA TRAFORMER IDUCTIE OAD MIIMUM WATTAGE MAXIMUM WATTAGE MIIMUM WATTAGE MAXIMUM WATTAGE MAXIMUM UMBER OF TRAFORMER WA BOX DIMEIO DIAGRAM 40W 250W 40W 60W 4 6mm A 60W 400W 60W 250W 6 6mm A DGD MK400W 40W 400W 40W 250W 6 35mm B DGD CB400W 40W 400W 40W 250W 6 40mm C DGD EU400W 40W 400W 40W 250W 6 35mm D lave push buttons These are normally open (push to make) push buttons. They can be used as es to operate a DAER oft start. DAER PRODUCT ORDER CODE 2 PRODUCT DECRIPTIO WA BOX DIMEIO DIAGRAM gang plated push button 6mm A 2 gang plated push button 6mm A G MK lave grid module suitable for MK Grid Plus 35mm B G CB lave grid module suitable for Crabtree grid 40mm C G EU lave grid module suitable for Eurodata plates 35mm D Wiring diagrams 2-WAY CIRCUIT ITERMEDIATE CIRCUIT 75.. Existing 2-way circuit Existing intermediate circuit Dimming circuits with 2-way ing and dimming Dimming circuits with multi-way ing and dimming ATERATIE 2-WAY CIRCUIT Existing alternative 2-way circuit ATERATIE ITERMEDIATE CIRCUIT Existing alternative intermediate circuit Alternative dimming circuits with 2-way ing and dimming DAER Alternative dimming circuits with multi-way ing and dimming DAER DAER Telephone: +44(0)

9 MAUA HIGH FREQUECY DIMMER High frequency controllers for -0DC or DI dimmable s (including EDs). All versions include a relay capable of ing a total of, lamps plus other of up to 6 amps, including fluorescent. When controlling ED drivers a capacitor (order code CAPOAD) may be required to augment the. Plated versions: Push on, push off, with rotary dimming control. Grid modules: Push on, push off, hold to dim. ersions to suit the MK Grid Plus, Crabtree grid and Eurodata plates. They may be placed in any position on the appropriate grid or plate. They can also be operated by additional mains rated, normally open retractive es. Please call for details. PECIFICATIO Plated versions: Push on, push off, rotary dimming control. Grid modules: Push on, push off, hold to dim. Dimensions: ee diagrams below. OADIG -0DC (plated): ersion for control of one or two -0DC s. ersion for control of up to twenty -0DC s. -0DC (grid): Grid modules for control of up to twenty -0DC s. DI (plated): For control of up to twenty DI s. 5 YEAR WARRATY - MADE I THE U.K. A. Dimensions in mm DPD 0DC B, DPD 0DC MB, DPD DI DGD MK 0DC B. Dimensions in mm C. Dimensions in mm D. Dimensions in mm DGD CB 0DC DGD EU 0DC

10 MAUA HIGH FREQUECY DIMMER DAER PRODUCT ORDER CODE FORMAT BAAT OUTPUT WA BOX DIMEIO DIMEIO DIAGRAM WIRIG DIAGRAM DPD 0DC B Plated, gang or 2-0DC s 6mm x x 2mm A 77. DPD 0DC MB Plated, gang Up to 20* -0DC s 6mm x x 2mm A 77.2 DPD DI Plated, gang Up to 20* DI s 25mm x x 2mm A 77.3 DGD MK 0DC Grid module suitable for MK Grid Plus Up to 20* -0DC s 35mm 59 x x 34mm B 77.4 DGD CB 0DC Grid module suitable for Crabtree grid Up to 20* -0DC s 40mm 5 x x mm C 77.4 DGD EU 0DC Grid module suitable for Eurodata plates Up to 20* -0DC s 35mm 50 x 25 x mm D 77.4 * Can control up to 20mA, eg. 20 s at ma. Wiring diagrams 77.. DPD 0DC B dimming a single -0DC (optional multi-way ing illustrated) 2-way intermediate (es) 2 DPD 0DC B optional other * control lines 0 * Total of (s), lamps plus other not more than 6 amps DPD 0DC MB dimming several -0DC s (optional multi-way ing illustrated) 2-way intermediate (es) 2 DPD 0DC MB optional other * control lines * Total of s, lamps plus other not more than 6 amps DPD DI dimming several DI s (optional multi-way ing illustrated) 2-way 2 DPD DI intermediate (es) optional other * control lines D D2 D D2 D D2 * Total of s, lamps plus other not more than 6 amps DGD MK 0DC, DGD CB 0DC, DGD EU 0DC dimming several -0DC s mains rated, normally open push button(s) High frequency grid module R optional other * control lines * Total of s, lamps plus other not more than 6 amps Telephone: +44(0)