Solid / Liquid Level Measurement for Field Application Pneumatic Vibrator/Air Shocker Solution Temperature Controller/ Counter /Digital Panel Meter

Transcription

1 Solid / Liquid Level Measurement for Field Application Pneumatic Vibrator/Air Shocker Solution Temperature Controller/ Counter /Digital Panel Meter

2 By-pass Level Transmitter EF Series Material SUS316, PVDF, PP, Titanium Heating jacket installation available High temp. up to 400BC High pressure up to 130 Bar Accuracy: A6.35mm Output: 4~20mA Magnetic Float Level Transmitter FG Series Output available with loop power and 3 wire resistance Resolution: A6.35 mm, A12.7 mm Housing available with explosion proof and anti-corrosive Agency Approval: ABS, GL, CE, NEPSI (EEx d ) Enclosure protection: IP65, EEx d llb T4 Measuring range: max. 6M. Mini By-Pass Level Transmitter MEF Series Visible level indication Safer than glass type of level gauges Smart volume allows easy installation. Magnetic Switches can be installed and adjusted to control Low Level and High Level Alarms. Level Transducer can be installed to convert level into 4-20mA analogue signal. Side Mounting Float Switch FF Series Max. Operating Temperature: 350BC Wetted parts available with stainless steel and plastic. Housing available with explosion proof and anti-corrosive. Agency Approval: ABS, GL, CE, NEPSI (EEx d) Mini Float Level Switch FC/FD Series Compact simple design with high reliability, and low price Different mounting options Different connection types water fountain, machinery, electrical, chemical, marine, test instrument, food machinery, washer, air condition, hydraulic machine Magnetic Float Level Switch FC/FD Series Custom-made multi-point control, easy installation, reliable performance Housing available with explosion proof and anti-corrosive Max. Operating Temperature: 200BC for stainless steel liquid processing, heat exchanger, hydraulic, power plant, oil, shipbuilding & petrochemical Industries Cable Float Level Switch FA/FB Series Float material available with plastic and stainless steel Micro switch, Proximity Switch, Reed Switch and Mercury Switch available Simple installation and durable

3 RF-Capacitance / Admittance Level Switch SB Series Suitable for sticky, viscosity application Max. Operating Temperature: 550BC Time delay & ground level test function available Pressure Level Transmitter EC Series Designed for complete submersibility Unique cable seal system ensures water tight integrity Pressure range: 0.1~400 Bar Accuracy: 0.3%FS, 0.5%FS Output: 4~20mA or 0~10Vdc Zero & Span adjustment Vibrating Probe Level Switch SC Series Glass window allows visible observation of the Power Supply and Output, without the need to remove the cover of the enclosure (SC3 series). Dual Insulation to prevent damage on PCB by moisture (SC3 series) Power Supply: 20~250Vac/Vdc, 50/60Hz Output: SPDT Relay, SSR MOSFET No calibration required. Ease of use, rugged design High/Low failure safe modes. Safe and reliable operating Digital Differential Pressure Transmitter EC3 Series Accuracy: ±0.075%~±0.1% Rate of Measuring Range: 100:1 Capacitance Sensor is applied to enhance over-pressure resistance capacity. Available with various diaphragm materials Measurement: Meter Pressure, Absolute Pressure, Negative Pressure Output: 4~20mA / 2-wire 6-digits LCD Display Calibration can be done through RS485 or HART. Tuning Fork Level Switch SC Series Glass window allows visible observation of the Power Supply and Output, without the need to remove the cover of the enclosure (SC3 series). Dual Insulation to prevent damage on PCB by moisture (SC3 series) Power Supply: 20~250Vac/Vdc, 50/60Hz Output: SPDT Relay, SSR MOSFET No calibration required. Ease of use, rugged design High/Low failure safe modes. Safe and reliable operating Capacitance Level Switch SA Series Ground Level Test Function available Max. Operating Temperature: 800BC Sensitivity and time delay adjustable Rotary Paddle Level Switch SE Series Torsion adjustable for light material Clutch assembly to protect the motor Good shaft seal designed Temperature up to 200BC Various power supply selectable Unique sealing ring design to protect dust permeation suitable for chemical, food, mining, plastic, ceramic industries

4 Ultrasonic Level Transmitter EA Series Non-contact operation ensures readings will not be affected by material character (such as pressure, viscosity, density) Liquid measuring range max. 50M, Short Range 5M available Solid measuring range max. 35M, Short Range 5M available Level, distance, flow volume display function selectable Radar Level Transmitter JFR Series Non Contact Measurement With LCD Display, User Friendly Calibration Available for High Pressure, High Temp. High Viscosity Fluid, Dusty Environment Intrinsic Safety and Explosure Proof Measuring Range 0.5m~40m Wireless & PROFIBUS Supported Magnetostrictive Level Transmitter EG Series Absolute position measurement Excellent resolution and repeatability Voltage, current and RS485 outputs Field adjustable zero and span settings (analog only) Fast response time, High reliable performance of 0.01% F.S. resolution, with 0.1% F.S. Linearity Enclosure IP-67 rating LPG liquid medium, pharmaceutical / beverage chemical process Electromechanical Level Measuring System EE Series Microprocessor based controller Standard measuring range of 45M, with maximum of 70M available Different types of sensing weights to choose from Alarm output for sensing probe buried and probe wire broken condition ore, clinker, coal, cement, grain, plastic powder, feedstuffs, granule, and any liquid RF-Capacitance Level Transmitter EB Series Operating Voltage: 24Vdc; max. Output current: 4~20mA, resolution: K2% Max. Tensile strength of wire (f9mm) can up to 3.5 Tons and 50M in length Sensitive range: 150pf, 500pf, 1500pf High temp. Up to 200BC Unaffected by pressure, sound wave temperature Loop Power Indicator LR Series Loop power operation Universal display unit for all 4~20mA transmission circuits Work with standard DIN plug 4 Digit LCD display, free scaling of display value 3-keys operation 4~20mA,10~50mA ranges

5 Materials Management System MMS Series MMS accumulates tanks data from level instruments that are equipped with RS-485 interface and then data are transmitted to the main computer. Data being transmitted includes Measuring Distance, Analogue Output Setting, Distance / Level, Tank Height Setting, Zero Point Setting, High Alarm Setting, Low Alarm Setting, Error Alarm (plumb buried, cable break), Communication Mode Setting, Communication ID Setting, Baud Rate Setting, Communication Format Setting, etc. Optical Level Switch SD Series NPN, PNP open collector output to energize relay or PLC Outer material of PC, Polysulfone, SUS304/316 for acidity and alkaline; applicable in grease, waste water, liquid solution, liquor, alcohol...etc Over-current and reverse polarity protection LED status indication liquid leakage detection motor/pump protection Level Measurement System LMS Series Stable system framework thanks to ARM embedded system Full Color Touch LCD display to show 4 tanks information at one time One data management center to control and monitor level information of numerous tanks Simultaneous tank data monitoring chart Automatically calculate non-linear compensation of all types of tanks Equipped with Intelligent Automatic Internet Alarm technique, tank data are sent by SMS through GSM. Pressure Switch SQ Series Robust In Any Severe Application Customized Body Housing (steel, Sus316, Brass) Selectable Contact (gold Contact Or Silver Contact) Screw / Push-on Terminal Contact Selectable High Quality And Cost Effective Adjustable Pressure Range Setting Thermal Dispersion Flow Switch SP Series Open collector alarm output Measuring Range: (Speed) water: 1~150 cm/s, oil: 3~300 cm/s Material: SUS304, 316, PVDF, PP No moving parts to cause wear and tear water power plant, HVAC system, steel marking, petrochemical, food process, pharmaceutical, semiconductor, cooling pipe Cloth Seam Detector PS Series Adopted multi-control function allows the system to response simultaneously. Specially designed circuit structure, working performance will not be affected even in a severe environment. Free of battery. Data are kept permanently without any power/ electricity needed, and it is possible to introduce the setup input parameters of the machine. Specially designed circuit enhances stability of the system. Paddle Type Flow Switch SF Series Operating Temp: 30~150BC Contact Rating: 60W/220Vdc SPDT Operating Pressure: 355 PSI

6 Speed Monitor ED Series Maximum monitoring range 1~999rpm. 7-seg led display 0~999 Alarm monitoring: low speed, stop, reverse, blackout and overload Start up delay function allow motor to run up gradually Alarm delay function to avoid false alarm, which may be caused by temporary slow down or load change Multi-function Temperature And Speed Safety Meter TS Series Key pad lock with password to avoid unexpected dialing Delay start Overload delay RS-485-Modbus communication interface Programmable Vibrating Controller AE610/620 Series Specially designed for universal application modes Functions are controlled by microprocessor. 1~10/ 20 Output Users can choose the best application mode based on the natures of the equipment and material detected. Applied in sequential controller of vibrators Air Hammer BAS/BAH/BVP Series Highly strengthened aluminum body Low frequency/ continuous impact model, sudden activation/ deactivation is allowed Frequency and amplitude of impact can be adjusted as required Direct impact onto target object to produce the optimum vibration feedback Pneumatic Vibrator BVK/BVR/BVT Series Special aluminum alloy, small size, light weight Fine enclosure protection can be applied in high humidity dust working area Frequency and amplitude of vibration can be adjusted as required Low price and durable

7 Diaphragm Valve BRD Series Fast response, large flow volume, good reverse cleaning affect, less air consumption Available with 3/4", 1-1/2", 2", 2-1/2", 3" Material: Aluminum, Stainless Steel Programmable Sequential Controller AE611/621 Series Designed by microprocessor to control solenoid pilot 2 sets of digital displays to indicate the next cleaning spot in the bag, and also indicate how much time left for cleaning next bag Jet pulse timing, jet pulse interval, and control points of the solenoid pilot are adjustable. Circular cleaning continues even when the machine is shut down. Setting can be done through the buttons of the control panel. Controller for Dust Collector System AE Series Jet pulse timing of sequential controller: 0~0.2 seconds Jet pulse interval: 2~180 seconds No switch contact in the circuit, operating life is half-eternity. Power supply: 110/220Vac, 24Vdc Control points: 10, 20, 40 points Safety Cable Pull Switch SRS Series Contact rating: 10A/250Vac For emergency or normal shut-off Pull force: 5Kg Accessories of Diaphragm Valve for Dust Collector BDB Series Connector: Convenient for users to install ash cleaning system on the dust collector Free from welding process during installation, and allows easy removal for maintenance purposes Remote Solenoid Enclosure Working Liquid: Air Diaphragm Material: NBR Operation Temp.: -20~85BC Remote Solenoid Pilot: Conveyor Belt Misalignment Switch SRT Series Contact rating: 10A/250Vac For Protection of Belt Conveyors and Personnel

8 [FC/FD] [FG] [FF] [FA/FB] [SP] [SF] Mini Float/Magnetic Float Level Switch Magnetic Float Level Transmitter Side Mounting Float Switch Cable Float Level Switch Thermal Dispersion Flow Switch Paddle Flow Switch [EF] [EB] [EA] [EG] [FA/FB] [LR] [EB] [EC] [PB] [FG] [JFR] [FC/FD] [SB] [SD] [SE] Optical Level Switch Rotary Paddle Level Switch [SA] [SA] Capacitance Level Switch [FF] [EC] [LR] Pressure Level Transmitter Loop Power Indicator [SF] Vibrating Probe Level Switch Tuning Fork Level Switch [SD] [FC/FD] [SP] [EB] [SB] RF-Capacitance Level Transmitter RF-Capacitance / Admittance Level Switch [EE] [EA] [PB/PM] [EG] [EF] Magnetostrictive Level Transmitter By-Pass Level Transmitter [EB] [SB] [SE] [JFR] [EB] [MEF] [EA] Mini By-Pass Level Transmitter Ultrasonic Level Transmitter [SA] [JFR] [EE] FMCW Radar Level Transmitter Electromechanical Level Measuring System [SE] [ED] Speed Monitor [SB] [SRT/SRS] Conveyer Belt Misalignment Switch & Safety Cable Pull Switch [PB/PM] Microprocessor Based Bargraphic Display Scaling Meter [BRD/AE] Valve and Controller for Dust Collector System [BAS/BAH/BVP] Air Hammer [BVK/BVR/BVT] Pneumatic Vibrator [BAS/ BAH/BVP] [BVK/ BVR/BVT] FineTek Co., Ltd. No.16, Tzuchiang St., Tucheng Industrial Park, New Taipei City 236, Taiwan. TEL: FAX: info@fine-tek.com Taichung Branch TEL: FAX: Tainan Branch TEL: FAX: Kaohsiung Branch TEL: FAX: Fine automation (ShangHai) Co., Ltd. No.451 DuHui Rd, MinHang District, Shanghai, China TEL: FAX: info.sh@fine-tek.com FineTek Pte Ltd. No. 60 Kaki Bukit Place, #07-06 Eunos Techpark 2 Lobby B, Singapore TEL: FAX: info.sg@fine-tek.com Distributor: FineTeK GmbH Frankfurter Str. 62, OG D Ruesselsehim, Germany TEL: FAX: info@fine-tek.de Aplus Finetek Sensor inc. 355 S. Lemon Ave, Suite D, Walnut, CA Tel : Fax : peter.wu@aplusfine.com 08-ALL01-B1-ED, 10/05/ JW