SMART VALVE POSITIONER 4 to 20 ma + HART Digital Communication. smar B87
|
|
- Constance Charles
- 5 years ago
- Views:
Transcription
1 SMART VALVE POSITIONER to ma + HART Digital Communication B87
2 DESCRIPTION The FY microprocessor based positioner provides fast and accurate positioning of diaphragm or cylinder actuators. The FY produces a pressure output as required to position a control valve according to a to ma input signal supplied by a controller. The FY is compact and easy to maintain and adjust. Remote communication based on the HART protocol enables an easy interface between the field and the control room and several interesting features that considerably reduce installation, operation and maintenance costs. The FY is part of Smar s complete series of t devices. Local calibration and parameter setting may also be done without external devices. Reliable and Flexible Elimination of many mechanical parts seen in other positioners has a number of advantages. Higher reliability since there are less parts that wear, safer since there are less moving parts, more accurate since there is less deadband from mechanical imprecision. Position sensing is done without any mechanical contact virtually eliminating wear and tear and subsequent degradation. FY directly senses longitudinal or rotary movement based on the Hall effect. Valve characteristics, action, damping, etc. are altered in software instead of changing mechanical cam and spring. Changing damping, action or characteristics between linear, equal percentage, hyperbolic (quick opening) makes the FY extremely flexible. Compact and modular design. Low air consumption. Easy installation. Direct non-contact position sensing. Operate with rotary or linear motion, single or double acting pneumatic actuators. Easy adjustment and parameter settings with remote HART communication or local adjustment and display Weather proof, explosion proof and intrinsically safe. Flow Characteristics change with software cams. B88
3 OPERATION Output Module The main parts of the output module are the pilot, servo, Hall Effect sensor and the output control circuit. The FY CPU produces an electronic setpoint signal for the control circuit. The control circuit receives an actual valve position feedback signal from a Hall Effect sensor. The pneumatic part is based on the well known and widely used pilot tube and spool valve technology. A piezoelectric disk is used as flapper in the pilot stage. The flapper is deflected when a voltage is applied by the control circuit. If a change in position is demanded, the flapper deflects. A small stream of air flowing through the nozzle is changed, causing a change in pressure in the pilot chamber. This is called the pilot pressure. For a certain section used for the operation, the pilot pressure response is linear with the flapper deflection. The pilot pressure is far too low, and has no flow capacity and must therefore be boosted. This is done in the servo section, which acts as a transducer. The servo section has one diaphragm on the pilot chamber side, and another smaller diaphragm on the spool chamber side. The pilot pressure applies a force to the pilot side diaphragm which at steady state will be equal to the force that the spool valve applies on the smaller diaphragm. On-Board Parameters Convenient remote communication with HHT also allows easy configuration. Local adjustment allows operator easy calibration and parameter setting without external devices. Calibration of the open and close position of the actuator is automatic. If another position is required the fine calibration of zero point and travel is possible using a hand held terminal or a magnetic tool. Gain and travel time are adjustable allowing optimization for the process conditions. FY has combined all these functions in a single unit: Direct or reverse action. Single or double acting actuators. Linear and rotary motion actuators. Split range. Flow characterization: - Linear. - Equal percentage :5 - :5. - Hyperbolic :5 - : freely selectable points. When a change in position is demanded, pilot pressure increases or decreases as explained for the pilot stage. A change in pilot pressure forces the spool valve up or down changing the output and output pressures until the desired position is reached. The mounting set for rotary actuators complies with VDI/VDE 85. Rotary Magnet FLOW RESTRICTION PIEO FLAPPER NOLE PILOT DIAPHRAGM PILOT CHAMBER The mounting set for linear actuators complies with IEC5-6 (NAMUR). SPOOL DIAPHRAGM AIR SUPPLY SPOOL VENT OUTPUT OUTPUT VENT ø...5 ( ) CLAMPS Linear Magnet 65 (.56) SPRING B89
4 TECHNICAL CHARACTERISTICS Functional Specifications Travel Linear Motion: - mm. Rotary Motion: - Rotation Angle. Extended Linear Motion: - mm. Input Signal - ma, -wire. Power Supplied by the - ma current. No external supply required. Voltage drop Vdc max / ma (equivalent to 55 ). Minimum current.8 ma. Communication Protocol HART (is superimposed on the current signal). Reverse Polarity Protection No damage occurs from reversal of normal supply current (- ma) or from misapplication of up 5 ma. Output Output to actuator % supply air pressure. Single or double-action. Pressure Supply. - 7 bar (- psi). Free of oil, dust and water. Indication ½-digit LCD indicator. Hazardous Location Certification Explosion proof, weather proof and intrinsically safe from CEPEL, FM, CSA, NEMKO and DMT (pending). Temperature Limits Operation: - to 85 C (- to 85 F). Storage: - to 9 C (- to 9 F). Display: - to 6 C ( to F) operation. - to 85 C (- to 85 F) without damage. Humidity Limits to % RH. Flow Characterization Linear, Equal Percentage, Quick Opening, 6 freely selectable points. Gain Through software. Locally adjustable. Performance Specifications Sensitivity.% F.S. Repeatibility.% F.S. Hysteresis.% F.S. Consumption.5 Nm/h³ (.5 SCFM) at. bar ( psi) supply..7 Nm/h³ (. SCFM) at 5.6 bar (8 psi) supply. Output Capacity 6.7 Nm/h³ (8 SCFM) at 5.6 bar (8 psi) supply. Ambient Temperature Effect.8%/ C of span. Supply Pressure Effect Negligible. Vibration Effect ±. % /g of span during the following conditions: 5-5 Hz at mm constant displacement. 5-5 Hz at g. 5- Hz at g. Reference SAMA PMC. 98, Sec. 5., Condition, Steady State. Electro-Magnet Interference Effect Designed to comply with IEC 8 and European Standards EN58 and EN58. Physical Specifications Electrical Connection ½ - NPT, Pg,5 or M x,5. Pneumatic Connections Supply and output: ¼ -8 NPT. Gage: /8-7 NPT. Material of Construction Injected low copper aluminum with polyester painting or 6 Stainless Steel housing, with Buna N O-Rings on cover (NEMA X, IP 67). Weight Without display and mounting bracket:.7 kg. Add for digital display:.kg. Hart is a trademark of HART Communication Foundation. Travel Time Through software. Locally adjustable. Actual Position Sensing Magnet (Non-contact). Hall Effect. B9
5 ORDERING MODEL FY SMART VALVE POSITIONER - to ma + HART Digital Communication Local Indicator Without Digital Indicator With Digital Indicator Mounting Bracket Without Bracket With Bracket A B Electrical Connections ½ - NPT M X,5 Pg,5 DIN Type of Actuator (Not Included) Rotary-Single Action Rotary Double Action Linear Stroke Up to 5 mm - Single Action Linear Stroke Up to 5 mm - Double Action Linear Stroke Up to 5 mm - Single Action Linear Stroke Up to 5 mm - Double Action Linear Stroke Up to mm - Single Action Linear Stroke Up to mm - Double Action Others Specify Indication Gage 5 Without Gage With Gage - Input With Gage - Output With Gages - Input and Output With Gages - Output and With Gages Others Specify Optional Items* Special Options - Specify FY - - / * TYPICAL MODEL NUMBER * Leave it blank for no optional items BFY BRACKET Positioner Mounting Bracket Without Positioner Bracket Universal Rotary Universal Linear (Yoke and Pillar) Linear - Yoke Type Linear - Pillar Type Others - Specify Magnet Mounting Bracket Without Magnet Mounting Bracket Rotary Linear up to 5 mm Linear up to 5 mm Linear up to mm Others - Specify Mounting Bracket Material C I 7 Carbon Steel Bracket 6 SST Bracket Carbon Steel Bracket and Accessories in SST Others Specify Optional Items* Specify Actuador Model / Company BFY - C / * TYPICAL MODEL NUMBER * Leave it blank for no optional items B9
6 DIMENSIONS Dimensions are mm (in) Valve Positioner Rotary Magnet OUTPUT /8-7 NPT OUTPUT /8-7 NPT SUPPLY /8-7 NPT MOUNTING HOLES FOR M6x SCREWS ( PLACES) 6,5 (.5) 55 (.6) 8 (.7) (.5) (.77) (.77) OUTPUT / - 8 NPT 9 (.5) SUPPLY / - 8 NPT 6 (.) OUTPUT / - 8 NPT ø8 (.7) (.5) 6,5 (.8) 5, (.) (.9) (.9) (.9) ø69 (.7) ø (.8) ø (.95) ø5 (.97) (.87) 9 (.5) (.5) Linear Magnet HOLE 6. (.5) ( PLACES) 68 (.68) 8 (.7) 9,5 (.95) 55 (.7).5 5 (.89) (.59) A (.) TRAVEL UP TO 5 mm (.59) UP TO 5 mm (.97) UP TO mm (.9) DIMENSION A mm (.7) 9 mm (.9) 85 mm (7.8) B9
SMART VALVE POSITIONER 4 to 20 ma + HART Digital Communication. smar
SMART VALVE POSITIONER to ma + HART Digital Communication smar DESCRIPTION The FY microprocessor based positioner provides fast and accurate positioning of diaphragm or cylinder actuators. The FY produces
More informationHART NEW. Digital Positioner PFLEX - Hart Protocol. Characteristics
Digital Positioner Characteristics Easy configuration - Excellent process control performance - Self calibration - Configuration via local adjustment or via software - Usual characterization curves or
More informationSINGLE-ACTING ACTUATORS FOR DOUBLE-ACTING & SERIES 65 POSITIONERS PNEUMATIC & ELECTRO-PNEUMATIC. The High Performance Company
POSITIONERS PNEUMATIC & SERIES 65 FOR DOUBLE-ACTING & SINGLE-ACTING ACTUATORS The High Performance Company SERIES 65 FEATURES The Brayline Series 65Pneumatic and Electro-Pneumatic Positioner feature modular
More informationFasTrak High Capacity Smart Positioner
FasTrak High Capacity Smart Positioner 2 CCI provides the next level of control valve performance CCI provides the next level of control valve performance with FasTrak, a high capacity digital positioner
More informationV200 Positioner. V200 P Pneumatic Positioner. V200 E Electropneumatic Positioner. Housing Material: Cast aluminium with polyester coating
V200 Positioner Housing Material: Cast aluminium with polyester coating Indicator Options: Flat pointed indicator or raised indicator (red/green or yellow/black) One housing for pneumatic or electropneumatic
More informationINTELLIGENT VALVE POSITIONER
INTELLIGENT VALVE POSITIONER FOR ACCURATE FINAL CONTROL ELEMENT POSITIONING Automatic setup Auto-tuning Non-contact position measurement Diagnosis for control valves including partial stroke test Easier
More informationSeries 60. New Smart Positioner. Compact design Convenient & powerful function Enhanced reliability
Series 60 New Smart Positioner Compact design Convenient & powerful function Enhanced reliability J Flow Controls, LLC 14 De Camp Cincinnati, OH 45216 Phone: 513-731-2900 Fax 513-731-6939 www.jflowcontrols.com
More informationTZIM. Electropneumatic Analog Positioner 10/ EN
TZIM Electropneumatic Analog Positioner EP001XA.tif Q Convenient, simple design Q Easy to handle Q User-friendly operation, easy to understand Q Reliable concept, I/P conversion through the 500,000 times
More informationControl Valves Positioner
Control Valves Positioner HiFlo Valve Positioner Easy calibration Corrosion-resistant cover and base Withstands 150 psi at all parts Two -sided cam for easy field reversibility Optional / NPT for piped
More informationControl Valves Positioner
Control Valves Positioner HiFlo HiFlo Valve Positioner Corrosion-resistant cover and base Easy calibration Withstands 150 psi at all parts Two -sided cam for easy field reversibility Optional / NPT for
More informationElectro-Pneumatic Linear Positioner Installation and Operation Instructions B GB
Installation and Operation Instructions 99.66.02-B GB Description of Device (4-~20mA) is the advanced control device for a linear control valve that provides unparalleled stability in difficult environments
More informationFlow Line Controls Positioner Specifications Series 55 3-15 psi Pneumatic Series 56 4-20 ma Electro-Pneumatic Series 55 Series 56 Flow Line Controls, Inc. P.O. Box 677 Schriever, LA 70395 Phone: 985-414-6003
More informationTECHNICAL BULLETIN. Logix 510si Series Digital Positioner. Experience In Motion FCD LGENTB /09
Logix 510si Series Digital Positioner TECHNICAL BULLETIN FCD LGENTB0510-01 09/09 Experience In Motion Introduction The Logix 510si series are single acting, user-friendly digital positioners. As all positioners
More informationPOSITIONERS and Controls for Complete Valve Automation
CONTROLS A Division of AT Controls Pneumatic & Electro-Pneumatic POSITIONERS and Controls for Complete Valve Automation 1 SS SERIES SS Features Easy and quick auto-calibration Detecting RA (reverse acting)
More information4.3 MSK SWITCH BOX MSK (SIZE I) FEATURES ADVANTAGES
SWITCH BOX MSK (SIZE I) FEATURES - A compact, robust switch box to be mounted on pneumatic actuators - Position response via integrated micro limit switches - Integrated terminal Strip - The micro limit
More informationMoniteur INSTALLATION & OPERATING INSTRUCTIONS. SERIES 40 Positioners. Installation and Operating Instructions Series 40 Positioners.
INSTALLATION & OPERATING INSTRUCTIONS SERIES 40 Positioners Form IO2-0406 Description of Device Moniteur's Series 40 pneumatic (3-15psi) and electropneumatic (4-20mA) positioners are advanced control devices
More informationFig Single-Acting Rotary Smart Positioner
Fig. 3303 Single-Acting Rotary Smart Positioner Order Information Model No. EC03303RSN52000S Econ series 3300 Smart Positioner for quarter turn actuators in single acting version. This positioner regulates
More informationSS3 Linear / Rotary. Smart Valve Positioner. Smart performance with innovative and ever-strong coil drive even under harsh working environments
Smart Valve Positioner SS3 Linear / Rotary Smart performance with innovative and ever-strong coil drive even under harsh working environments Easy and quick auto-calibration Detecting RA (reverse acting)
More informationType Installation, Operation and Maintenance Instructions. Ordering Information. Contents CA20 -
Type 2000 Pneumatic and Electropneumatic Valve Positioner Installation, Operation and Maintenance Instructions Ordering Information Use this coding system to order Model CA20 - Type of Positioner 00 P/P
More informationType Type 1001 Transducers. I/P & E/P Transducers
Type 1001 I/P & E/P Description The Type 1001 is a patented family of electropneumatic instruments that is used to reduce a supply pressure to a regulated output pressure which is directly proportional
More informationValve Positioners Series 760P/E Valve Positioners
Introduction Features & Benefits Universal design and choice of interchangeable AMUR IEC 54-6 rectilinear or VDI/VDE 845 rotary mountings provide wide application flexibility Double-acting or single-acting
More informationFisher 546 Electro Pneumatic Transducer
546 Transducer Product Bulletin Fisher 546 Electro Pneumatic Transducer Fisher 546 transducers receive a direct current input signal and use a torque motor, nozzle flapper, and pneumatic relay to convert
More informationValve Positioners Series 760P/E Valve Positioners
Introduction Features & Benefits Universal design and choice of interchangeable AMUR IEC 54-6 rectilinear VDI/VDE 845 rotary mountings provide wide application flexibility Double-acting or single-acting
More informationV200 Series Positioners
V200 Series Positioners In a single compact and rugged housing The V200 positioner incorporates the flexibility of converting from a pneumatic unit to several versions of an electropneumatic unit, and
More informationType 3660 and 3661 Positioners
August 1998 Bulletin 62.1:3660 Type 3660 and 3661 Positioners The Type 3660 pneumatic (see figure 1) or Type 3661 electro-pneumatic, single-acting positioners are used with various actuators on sliding-stem
More informationValtek XL Series High Performance Positioner. for Control Valves
Valtek XL Series High Performance Positioner for Control Valves Features Easy calibration Ground Screw Corrosion-resistant cover and base Simple signal conversion with interchangeable modules Split ranges
More informationFeatures. Flexibility
The V100 positioner can be ordered as a base model pneumatic positioner, converted to standard NEMA 4X electropneumatic, EX model, or FF (fail freeze) model in a matter of minutes, without removing the
More informationV200 Series Positioners
V200 Series Positioners In a single compact and rugged housing The V200 positioner incorporates the flexibility of converting from a pneumatic unit to several versions of an electropneumatic unit, and
More informationOperation & Maintenance Manual ALPHATEK Pneumatic Positioner Electro-Pneumatic Positioner
Operation & Maintenance Manual ALPHATEK Pneumatic Positioner Electro-Pneumatic Positioner Instruction Manual Jul 2006 Version 1.0 CONTENTS TABLE 1. GENERAL INFORMATION....3 2. DESCRIPTION... 5 3. ESPECIFICATION...
More informationInstallation and Operating Instructions Electro-Pneumatic Rotary Positioner SP-21. Description of Device. Part Number System
Description of Device VALMAC Posi-Zest SP-2100 Series is the advanced control device for a rotary control valve that provides unparalleled stability in difficult environments. Easy Maintenance Precise
More informationSP-20 Input. Installation and Operating Instructions Electro-Pneumatic Linear Positioner. Description of Device. Part Number System
Description of Device VALMAC Posi-Zest SP-2000 Series is the advanced control device for a linear control valve that provides unparalleled stability in difficult environments. Easy maintenance Precise
More informationCorrosion Resistant Pneumatic Positioners Model 4700P and 4700E
Corrosion Resistant Pneumatic Positioners Specification Data CS2007 4/98 Table of Contents Foreword............................................................. 2 Numbering System.....................................................
More informationThe T5220 Series Electro-Pneumatic Transducer converts a DC current or voltage input signal to a directly proportional pneumatic output.
GENERAL INFORMATION T5220 SERIES TRANSDUCER Electro-Pneumatic (I/P, E/P) APPLICATIONS The T5220 Series Electro-Pneumatic Transducer converts a DC current or voltage input signal to a directly proportional
More informationValtek Beta Positioner. Valtek Beta Positioners. for Control Valves
Valtek Beta Positioners for Control Valves 1 Features Easy calibration Corrosion-resistant cover and base Simple signal conversion with interchangeable modules Independent zero and span settings Split
More informationINTERPLANT STANDARD - STEEL INDUSTRY. Specification for Smart Pressure & Differential Pressure Transmitter
INTERPLANT STANDARD - STEEL INDUSTRY IPSS Specification for Smart Pressure & Differential Pressure Transmitter Corresponding IS does not exist IPSS: 2-07-104-15 1. Scope 1.1 This Interplant Standard covers
More informationSpring Cylinder Rotary Actuator
Spring Cylinder Rotary Actuator Rotary Actuator Spring Cylinder Rotary Actuators High torque and pneumatic stiffness combine together in the Mascot "Spring cylinder rotary actuator" These characteristics
More informationfact sheet Masoneilan * 8012/8013 Series Electro-pneumatic Valve Positioners GE Oil & Gas Excellent Dynamic Response and Positioning Accuracy
GE Oil & Gas Masoneilan * 8012/8013 Series Electro-pneumatic Valve Positioners fact sheet Excellent Dynamic Response and Positioning Accuracy Accurate, Simple, Rugged The primary function of a valve positioner
More informationAP ATEX AIRPOWER POSITIONERS AP2000 FEATURES AP1000 & AP1200 FEATURES OPTIONS OPTIONS
AP1000-2000 Airpower positioners are a robust range of rotary or linear valve positioners in AP1000 electro-pneumatic (4-20mA), AP1200 pneumatic (3-15 psi) or AP2000 programmable smart type. Designed to
More informationDouble Acting & Spring Return. SERIES 92/93 Rack & Pinion PNEUMATIC ACTUATOR. The High Performance Company
PNEUMATIC ACTUATOR SERIES 92/93 Rack & Pinion Double Acting & Spring Return The High Performance Company SERIES 92/93 Styling, strength, compactness, and simplicity of design have been combined to produce
More informationFisher 3710 and 3720 Positioners and 3722 Electro-Pneumatic Converter
3710 and 3720 Positioners Product Bulletin Fisher 3710 and 3720 Positioners and 3722 Electro-Pneumatic Converter Fisher 3710 pneumatic and 3720 electro-pneumatic positioners are designed for use with either
More informationARCAPRO positioner. Positioner customized for specific tasks
ARCAPRO ARCAPRO Positioner customized for specific tasks 2 3 1 A linear function between the input signal and stroke is the best way to ensure maximum control precision. Control valves with pneumatic actuators,
More informationT-1001 TYPE 1001 I/P & E/P TRANSDUCERS
TYPE 1001 I/P & E/P TRANSDUCERS T-1001 The Type 1001 is a patented family of electro-pneumatic instruments that is used to reduce a supply pressure to a regulated output pressure which is directly proportional
More informationSeries 3730 Electropneumatic Positioner Type
Series 3730 Electropneumatic Positioner Type 3730-1 Application Single-acting or double-acting positioner for attachment to pneumatic control valves. Self-calibrating, automatic adaptation to valve and
More informationProduct Specification
Automax Valve Automation Systems APEX 7000 Pneumatic Positioner Product Specification FCD AXENPS0125-06 Introduction: The Apex 7000 Pneumatic Positioner provides accurate valve positioning for rotary and
More informationSATRON VTe pressure transmitter
SATRON VTe pressure transmitter belongs to the series V-transmitters which will have both analog and smart properties. SATRON VTe is used for 0-4 kpa...0-00 MPa ranges. The transmitter communicates in
More informationPneumatic Positioner PNY Series USER'S MANUAL. Max-Air Technology. Version 1.0
USER'S MANUAL Max-Air Technology Version 1.0 Table of Contents Introduction 3 Manufacturer Warranty 3 Product Description 4 Main Features and Functions 4 Operation Logic 4 Specification 5 Parts and Assembly
More informationSS2 Linear / Rotary Smart Valve Positioner
COTROLS A Division of AT Controls Smart performance with innovative and ever-strong coil drive even under harsh working environments Also available in REMOTE TYPE 316 STAILESS STEEL BODY Smart performance
More informationFisher 3660 and 3661 Positioners
3660 and 3661 Positioners Product Bulletin Fisher 3660 and 3661 Positioners Fisher 3660 pneumatic and 3661 electro pneumatic single acting positioners are used with various actuators on sliding stem valves
More informationVALVE ACCESSORIES & CONTROLS V200 POSITIONER A POSITIONER THAT OFFERS IT ALL IN ONE COMPACT, SIMPLE, HOUSING
VALVE ACCESSORIES & CONTROLS V200 POSITIONER A POSITIONER THAT OFFERS IT ALL IN ONE COMPACT, SIMPLE, HOUSING WWW.VACACCESSORIES.COM 205-678-0507 The V200 Positioner Internal I/p with simple loop test points.
More informationFisher i2p 100 Electro Pneumatic Transducer
Product Bulletin D103197X012 i2p 100 Transducer Fisher i2p 100 Electro Pneumatic Transducer The Fisher i2p 100 electro pneumatic transducer, shown in figure 1, uses a converter module that converts a milliampere
More informationTECHNICAL BULLETIN. Logix 520MD Series Digital Positioner. Experience In Motion FCD LGENTB /09
Logix 520MD Series Digital Positioner TECHNICAL BULLETIN FCD LGENTB0520-01 11/09 Experience In Motion Introduction The Logix 520MD Series combines superior positioning and tuning functions with convenient
More informationFisher 3710 and 3720 Positioners and 3722 Electro Pneumatic Converter
Product Bulletin D200437X012 3710 and 3720 Positioners Fisher 3710 and 3720 Positioners and 3722 Electro Pneumatic Converter Fisher 3710 pneumatic (figure 1) and 3720 electro pneumatic positioners (figure
More informationSeries AV1 / 2 / 3 / 4 Characterizable pneumatic positioners
Data sheet DS/AV34 EN Rev. G Series AV / / 3 / 4 Analog pneumatic and electro-pneumatic positioners built on proven performance for demanding process conditions Measurement made easy Proven pilot valve
More informationData Sheet. I/P and E/P converters. RS stock numbers ,
Data Pack G Issued March 997 3-4998 Data Sheet I/P and E/P converters RS stock numbers 79-47, 79-48 Standard (electro-mechanical) Construction Housing Zinc diecastings, passivated and black epoxy paint,
More informationSMART POSITIONER YT-2300 SERIES USER'S MANUAL
SMART POSITIONER YT-2300 SERIES USER'S MANUAL Table of Contents Contents Page No. Introduction 4 Manufacturer Warranty 4 Product Description 5 Main Features and Functions 5 Label Description 6 Suffix Symbols
More informationSATRON VDt Differential Pressure Transmitter
SATRON VDt differential pressure transmitter belongs to V-transmitter family. The series V transmitters have both analog and smart properties. SATRON VDt is used for -,1kPa...-15 MPa ranges. It is a 2-wire
More informationActuators & Positioners Pneumatic Actuators Series UP1/2/3/4/5/6
Data Sheet Actuators & Positioners Pneumatic Actuators Series UP1/2/3/4/5/6 Wide Range of Torque Ratings - Six actuator sizes available in ratings from 122 to 6372 Newton meters (90 to 4700 foot-pounds)
More informationMiniature I/P, E/P Transducer for Electronic Air Pressure Control
Miniature I/P, E/P Transducer for Electronic Air Pressure Control Self-correcting to maintain precise control The Type-900X I/P, E/P transducer converts an electrical signal (current or voltage) to a proportional
More informationSeries AV1 / 2 / 4 Characterizable pneumatic positioners
Data sheet DS/AV24 EN Rev. H Series AV / 2 / 4 Analog pneumatic and electro-pneumatic positioners built on proven performance for demanding process conditions Measurement made easy Proven pilot valve increased
More informationUser s Manual. Pneumatic Positioner. Series 58. J Flow. Series 58. J Flow
Pneumatic Positioner Series 58 User s Manual J Flow Series 58 J Flow Series 58 J Flow Controls, LLC 14 De Camp Cincinnati, OH 45216 Phone: 513-731-2900 Fax 513-731-6939 www.jflowcontrols.com Introduction
More informationMiniature I/P, E/P Transducer for Electronic Air Pressure Control
Type 900X Miniature I/P, E/P Transducer for Electronic Air Pressure Control Self-correcting to maintain precise control Available with zero-based ranges The Type-900X I/P, E/P transducer converts an electrical
More informationActuators & Positioners Electro-Pneumatic Converters I/P Signal Converters - TEIP 11 Model without Booster Stage
Data Sheet Actuators & Positioners Electro-Pneumatic Converters I/P Signal Converters - TEIP 11 Model without Booster Stage Reliable through well-proven concept - More than 1,000,000 units in use Compact
More informationABB MEASUREMENT & ANALYTICS DATA SHEET. AV1 and AV2 Characterizable pneumatic and electro-pneumatic positioners
ABB MEASUREMENT & ANALYTICS DATA SHEET AV1 and AV2 Characterizable pneumatic and electro-pneumatic positioners 2 AV 1 AN D AV 2 CH AR ACTER I Z ABLE PNE U MATIC POSITIONE RS DS/AV 1 2-E N RE V. I Measurement
More informationPositioners Converters Limit Switches Position Transmitters Solenoid Valves Accessories. Selection and Application
Positioners Converters Limit Switches Position Transmitters Solenoid Valves Accessories Selection and Application Associated s T 8355 EN ff. Edition January 2010 Information Sheet T 8350 EN Positioners,
More informationSystem 6000 Electropneumatic Converter for Direct Current Signals Type 6116 i/p Converter
System 6000 Electropneumatic Converter for Direct Current Signals Type 6116 i/p Converter Application Used to convert a direct-current input signal into a pneumatic output signal for measuring and control
More informationE-training. Positioners (Pneumatic, Electro pneumatic, I to P converters) Pneumatically actuated valves can be positioned in a number of ways.
Welcome to the K Controls e-training course designed to deliver useful Pneumatic Valve Actuation application information in small instalments. To unsubscribe or to register a colleague to receive these
More informationFisher 3710 and 3720 Positioners and 3722 Electro Pneumatic Converter
Product Bulletin D200437X012 3710 and 3720 Positioners Fisher 3710 and 3720 Positioners and 3722 Electro Pneumatic Converter Fisher 3710 pneumatic (figure 1) and 3720 electro pneumatic positioners (figure
More informationCONTROLS INC. Position Indicators. Valve Positioners
Position Indicators Valve Positioners Apex 5000 The Apex 5000 Pneumatic Positioner provides accurate valve positioning with advanced features. It may be used with 3-15 psi pneumatic control signals, or
More informationTOP-QUALITY PNEUMATIC ACTUATOR
TOP-QUALITY PNEUMATIC ACTUATOR BS EN ISO 9001:2000 INTRODUCTION PDS series Pneumatic Actuators are designed using Scotch-Yoke technology from PDS 50 to the largest of PDS 200. Scotch-Yoke technology is
More informationElectro-Pneumatic Positioner YT-1000 / 1050 SERIES
Electro-Pneumatic Positioner YT-1000 / 1050 SERIES PRODUCT MANUAL VERSION 1.01 Contents 1. Introduction 4 1.1 General information for the users. 4 1.2 Manufacturer Warranty 4 1.3 Explosion Proof Warning.
More informationV200 Series Positioners
V200 Series Positioners In a single compact and rugged housing The V200 incorporates the flexibility of converting from a pneumatic unit to several versions of an electropneumatic unit, and the ability
More informationFisher 3610J and 3620J Positioners and 3622 Electro-Pneumatic Converter
360J and 3620J Positioners Product ulletin Fisher 360J and 3620J Positioners and 3622 Electro-Pneumatic Converter Fisher 360J, 360JP, 3620J, 3620JP, 362JP, and 3622 instruments are part of the 3600 series
More informationPneumatic Positioner Type 3766 Electropneumatic Positioner Type 3767
Pneumatic Positioner Type 3766 Electropneumatic Positioner Type 3767 Application Single-acting or double-acting positioners for attachment to pneumatic control valves. Supplied with a pneumatic input signal
More informationSATRON VVFe Pressure Transmitter
SATRON VVFe pressure transmitter belongs to Vtransmitter family. SATRON VVFe is used for 0 4 kpa...0500 kpa ranges. It is a 2wire transmitter with HART standard communication. SATRON VVFe pressure transmitter
More informationSATRON VT Pressure Transmitter
SATRON VT pressure transmitter belongs to the series V-transmitters. SATRON VT is used for 0-1.4 kpa...0-100 MPa ranges. It is a 2-wire transmitter with HART standard communication. In pressure measuring
More informationElectro-Pneumatic Positioner YT-1000 / 1050 SERIES
Electro-Pneumatic Positioner YT-1000 / 1050 SERIES PRODUCT MANUAL VERSION 1.01 Contents 1. Introduction 4 1.1 General information for the users. 4 1.2 Manufacturer Warranty 4 1.3 Explosion Proof Warning.
More informationType 3761 Pneumatic or Electropneumatic Positioner for Rotary Actuators. Fig. 1 Type 3761 Positioner. Mounting and Operating Instructions EB 8386 EN
Type 3761 Pneumatic or Electropneumatic Positioner for Rotary Actuators Fig. 1 Type 3761 Positioner Mounting and Operating Instructions EB 8386 EN Edition July 2007 Contents Contents Page 1 Design and
More informationField IT Actuators & Positioners Electro-Pneumatic Converters I/P Signal Converters Standard Model with Booster Stage
Data Sheet Field IT Actuators & Positioners Electro-Pneumatic Converters I/P Signal Converters Standard Model with Booster Stage Reliable through well-proven concept - More than 1,000,000 units in use
More informationMiniature I/P, E/P Transducer
Miniature I/P, E/P Transducer Accurate and economical electronic pressure control The Type 550X is an electronic pressure regulator that converts a variable signal (current or voltage) to a proportional
More informationField instrumentation. Electropneumatic units. as I/P converters and positioners
Electropneumatic units as I/P converters and positioners I/P converter TEIP 11, millionfold approved Analogue positioner TZIM, robust and low-cost concept Intelligent positioner - TZID for top level demands
More informationSystem 6000 Electropneumatic Converter for Direct Current Signals i/p Converter Type 6126
System 6 Electropneumatic Converter for Direct Current Signals i/p Converter Type 66 Application Devices used to convert a direct current signal into a pneumatic signal for measurement and control. Especially
More informationABB Automation. Characterizable Pneumatic Positioners Series AV1/2/3/4. Series AV1/2/3/4 Pneumatic Positioners
Specification Valve Automation Instruments Characterizable Pneumatic Positioners Series AV1/2/3/4 Proven pilot valve - Increased realibility minimizes downtime and maintenance costs. High capacity - Standard
More informationThe EP5 electropneumatic positioner is
EP5 Electropneumatic Positioner The EP5 electropneumatic positioner is adapted from the PMV P5 pneumatic positioner. This compact and sturdy unit is designed for maximum performance in all types of environments.
More informationElectropneumatic positioner APIS
Electropneumatic positioner APIS HART protocol ATEX certificate II 2G Exia IIC T6/T5 Gb II 2G Exia IIC T6/T5/T4 Gb version with Hart Simple in installation and programming Possibility of remote assembling
More informationModel WEP Electro-pneumatic positioner. WEP positioner A valve control without compromise
Data Sheet DS/WEP-EN Rev. C Model WEP Electro-pneumatic positioner WEP positioner A valve control without compromise Standard - ma input Single acting, force-balance operating principle Excellent dynamic
More informationK10 Intrinsically Safe Electro-Pneumatic Positioner Operating Manual
K0 Intrinsically Safe Electro-Pneumatic Positioner Operating Manual Pneumatic Connection Outlet Port Gauge Single Acting Actuator (Spring Return): For single acting actuators Outlet Port 2 is to be plugged.
More informationActuators & Positioners Characterizable Pneumatic Positioners Series AV1/2/3
Data Sheet Actuators & Positioners Characterizable Pneumatic Positioners Series AV1/2/3 Proven pilot valve - Increased realiability minimizes downtime and maintenance costs. High capacity - Standard model
More informationPrecision Control Devices
Precision Control Devices Electro-Pneumatic Servo Pressure Controllers Electro-Pneumatic I/P, E/P, & P/I Transducers Diaphragm Regulators & Relays Diaphragm Cylinders Filter - Regulator - Lubricators Gauge
More informationFisher 3660 and 3661 Positioners
3660 and 3661 Positioners Product Bulletin Fisher 3660 and 3661 Positioners Fisher 3660 pneumatic and 3661 electro pneumatic single acting positioners are used with various actuators on sliding stem valves
More informationAPS & APIS ATEX AIRPOWER SWITCH BOXES FEATURES DESCRIPTION
page 1 DESCRIPTION The switch boxes are suitable for rotary actuators and are the industry leader in versatility, quality and approvals gained. Models include APS standard range with a variety of outputs
More informationCONTROLS. Bray Pneumatic Actuators & Accessories. Technical Manual. A Division of BRAY INTERNATIONAL, Inc.
CONTROLS A Division of BRAY INTERNATIONAL, Inc. Bray Pneumatic Actuators & Accessories Technical Manual TM-056 Pneumatic Actuator - 08//00 Bray Pneumatic Actuators & Accessories Technical Manual - Table
More informationAutomation Selection Guide
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Automation Selection Guide Automator Products Pneumatic & Electric Actuators And Accessories PDF processed with CutePDF evaluation
More informationPneumatic or Electropneumatic Positioner for Rotary Actuators Type Fig. 1 Type 3761 Positioner. Mounting and Operating Instructions EB 8386 EN
Pneumatic or Electropneumatic Positioner for Rotary Actuators Type 3761 Fig. 1 Type 3761 Positioner Mounting and Operating Instructions EB 8386 EN Edition June 2004 Contents Contents Page 1 Design and
More informationFisher 3610J and 3620J Positioners and 3622 Electro Pneumatic Converter
Product ulletin D200064X02 360J and 3620J Positioners Fisher 360J and 3620J Positioners and 3622 Electro Pneumatic Converter Fisher 360J or 360JP pneumatic and 3620J or 3620JP electro pneumatic positioners
More informationElectro-Pneumatic Positioner Series 830/831-WP/EX. Operation & Maintenance Manual
Electro-Pneumatic Positioner Series 830/831-WP/EX Operation & Maintenance Manual Electro-Pneumatic Positioner Model 830/831- WP/EXP This operation & maintenance manual corresponds to Forbes Marshall Arca
More informationRosemount 1810 Flush Mount Pressure Transmitter ROSEMOUNT 1810 FEATURES:
Rosemount 1810 Rosemount 1810 Flush Mount Pressure Transmitter ROSEMOUNT 1810 FEATURES: A cleanable and compact stainless steel design An innovative patented venting configuration that prevents gauge reference
More informationTable of Contents. Proportional & Precision Regulator Instrumentation
Table of Contents Proportional & Precision Regulator Instrumentation...3-27 Features and Benefits... 3 Electropneumatic Transducer...4-5 Economy Miniature Electropneumatic Transducer...6-7 Miniature Electropneumatic
More informationCENTAC Inlet and Bypass Valve Positioners
CENTAC Inlet and Bypass Valve Positioners INGERSOLL-RAND AIR COMPRESSORS INLET AND BYPASS VALVE POSITIONERS Copyright Notice Copyright 1992, 1999 Ingersoll-Rand Company THIS CONTENTS OF THIS MANUAL ARE
More information350 Series Electrohydraulic Actuators
March 2000 350 Series Electrohydraulic Actuators 350 Series electrohydraulic actuators (figure 1) use a dc milliampere signal to operate a variety of slidingstem or rotary valves for proportional or two-position
More informationLogix 3800 Digital Positioner
Logix 3800 Digital Positioner Maximize production and reduce operating costs Experience In Motion Experience In Motion Solving the toughest challenges in flow management Flowserve is working with the world
More information