VACUUM PUMP Mini Pump
|
|
|
- Austin Norman
- 5 years ago
- Views:
Transcription
1
2 MINI PUMPS
3 VACUUM PUMP Mini Pump M-Mini Pump Max. vacuum level Max. flow rate Supply air pressure Supply air type Working temperature Noise level :-85 kpa(-25.1 inhg) :220 Nl/min (7.77 scfm) :4~6bar, max 7bar (58~87 psi, Max psi) : Dry compressed air :-20 to +80 :50~68 A C A BA B Main Advantages These M-Mini range pumps are compact and low weight design. Although they are the smallest of the VTM range they still use a Multi Stage Ejector principal for generating the vacuum, these pumps provide large capacity vacuum flow combined with high grade plastic, making the pumps resilient to most hazardous vapors. Because the pumps are too small they can be mounted locally to the vacuum requirement, even directly onto the back of suction cups if required. Different vacuum port sizes are available with options for an integrally mounted exhaust or a 3/8" detachable versions. The pumps can be specified with a vacuum switch or a quick release module attached directly onto the pump. The pump can have seal materials options of Viton & EPDM for corrosive and acidic appliactions. VTM5 - B - A3 CL - S1 - V 226 Specifications subject to change without notice.
4 VACUUM PUMP Mini Pump VACUUM PUMPS Specifications subject to change without notice
5 VACUUM PUMP Mini Pump X - Mini Pump Max. vacuum level Max. flow rate Supply air pressure Supply air type Working temperature Noise level :-92 kpa ( inhg) :185 Nl/min(6.53 scfm) : 4~6bar, max 7bar (58~87 psi, max 101.5psi) : Dry compressed air :-20 to +80 :50~68 A A BA B C Main Advantages These X-Mini range pumps are a compact and low weight design. Although they are the smallest of the VTX range they still use a Multi Stage Ejector principal for generating the vacuum. The X-Mini has the same external dimensions to that of the M-Mini, however the internal ejector system is different to enable higher levels of vacuum to be achieved. The X-Mini is a pump that bridges the gap between the High Flow VTM range and the High Vacuum VTH Range, giving a balance of the two. The housings are made from high grade plastic, making the pumps resilient to most hazardous vapours. Because the pumps are so small they can be mounted locally to the vacuum requirement, even directly onto the back of suction cups if required. Different vacuum port sizes are available with options for an integrally mounted exhaust or a 3/8"detachable versions. The pumps can be specified with a vacuum switch or a vacuum quick release module attached directly onto the pump. The pump can have seal materials options of Viton & EPDM for corrosive and acidic appliactions. VTX5 - B - A3 CL - S1 - V 228 Specifications subject to change without notice.
6 VACUUM PUMP Mini Pump VACUUM PUMPS Specifications subject to change without notice
7 VACUUM PUMP Mini Pump 5 VTM(X) (10)-A(NA) 5 VTM(X) (10)-B (BA, NB ) VTF 38-IN (See page : 318) [ Measure unit : mm] 230 Specifications subject to change without notice.
8 VACUUM PUMP Mini Pump 5 VTM(X) (10)-C (NC) with switch S1 VTF 38-IN (See page : 318) VTF 38-IN (See page : 318) VACUUM PUMPS [ Measure unit : mm] Specifications subject to change without notice
9 VACUUM PUMP One-Line Pump One-Line Pump Max. vacuum level Max. flow rate Supply air pressure Supply air type :VTOX pump -92 kpa( inhg) VTOM pump -85 kpa(-25.1 inhg) :VTOX pump 32 Nl/min x N Stack(1.13 scfm x N stack) VTOM pump 35 Nl/min x N Stack(1.23 scfm x N stack) :4~6bar, max 7bar (58~87 psi, max 101.5psi) : Dry compressed air Working temperature :-20~ 80 Noise level This oneline model uses individual pumps to make up the complete unit, each pump is in itself a multi stage ejector unit. Each individual pump can be stacked to together thus creating a modular manifold based system. The advantages of this unit is that it can be operated using just two control valve (as to vacuum and equal vacuum release time to each vacuum pads) whilst retaining individual vacuum lines separate to one another, therefore if any leakage or surface deformation occurs and one pad loses it vacuum, it does not effect the vacuum level in the other pads. Also, it can be used vacuum port for purging work filter cleaning function. It will be achieved long life time vacuum filter & pump. Pumps can be stacked up from 4-16 unit depending upon requirements. The pumps can have seal material options of Viton & EPDM for corrosive and acidic applications. :50~65 A Main Advantages Individual vacuum lines Filter cleaning function Efficiency and economic Can be adjust vacuum release flow Compact & long life time Application Semiconductor Robotic Packaging Pick & Place System Metal Sheet Handling Automotive VTOX5 x 6 - A3 R3 - CL - V About BUS cable ( 340, 341) 232 Specifications subject to change without notice.
10 VACUUM PUMP One-Line Pump VACUUM PUMPS Specifications subject to change without notice
11 VACUUM PUMP One-Line Pump 5 VTOX 10 VTOX 5,10 A 4 stack 5 stack 6 stack 7 stack 8 stack 9 stack 10 stack 11 stack 12 stack 13 stack 14 stack 15 stack 16 stack A B (mm) B (See page : 318) [ Measure unit : inch ] 234 Specifications subject to change without notice.
12 VACUUM PUMP One-Line Pump 5 VTOM 10 VTOM 5,10 A 4 stack 5 stack 6 stack 7 stack 8 stack 9 stack 10 stack 11 stack 12 stack 13 stack 14 stack 15 stack 16 stack A B (mm) B (See page : 318) VACUUM PUMPS [ Measure unit : inch ] Specifications subject to change without notice
13 VACUUM PUMP Minimultiple Pump M-Minimultiple Pump Max. vacuum level Max. flow rate Supply air pressure Supply air type Working temperature Noise level :-85 kpa(-25.1 inhg) :35 Nl/min x N Stack(1.23 scfm x N stack) :4~6bar, max 7bar (58~87 psi, max 101.5psi) : Dry compressed air :-20~ 80 :50~65 A Main Advantages This M-Minimultiple model uses individual pumps to make up the complete unit, each pump is in itself a multi stage ejector unit. Each individual pump can be stacked to together thus creating a modular manifold based system. The advantages of this unit is that it can be operated using just one control valve whilst retaining individual vacuum lines separate to one another, therefore if any leakage or surface deformation occurs and one pad loses it vacuum, it does not effect the vacuum level in the other pads. Pumps can be stacked up from 2-16 unit depending upon requirements. The pumps can have seal material options of Viton & EPDM for corrosive and acidic applications. VTM5 x 6 - A3 CL V 236 Specifications subject to change without notice.
14 VACUUM PUMP Minimultiple Pump VACUUM PUMPS Specifications subject to change without notice
15 VACUUM PUMP Minimultiple Pump X - Minimultiple Pump Max. vacuum level Max. flow rate Supply air pressure Supply air type Working temperature Noise level :-92 kpa( inhg) :32 Nl/min x N Stack(1.13scfm x N stack) :4~6bar, max 7bar (58~87 psi, max 101.5psi) : Dry compressed air :-20~ 80 :55~65 A Main Advantages This X-Minimultiple pump model uses individual pumps to make up the complete unit, each pump is in itself a multi stage ejetor unit. The X-Minimultiple pump has the same external dimensions to that of the M-Minimultiple pump, however the internal ejetor system is different to enable higher levels of vacuum to be achieved. The X- Minimultiple pump is a pump that bridges the gap between the High Flow VTM pump range and the High Vacuum VTH Range, giving a balance of the two. Each individual pump can be stacked togerher thus creating a modular manifold based system. The advantages of this unit is that it can be operated using just one control valve whilst retaining individual vacuum lines separate to one another, therefore if any leakage or surface deformation occurs and one pad loses its vacuum, it does not effect the vacuum level in the other pads. Pumps can be stacked up from 2-16 units depending upon requirements. The pumps can have seal material options of Viton & EPDM for corrosive and acidic applications. VTX5 x 6 - A3 CL - 4 V 238 Specifications subject to change without notice.
16 VACUUM PUMP Minimultiple Pump VACUUM PUMPS Specifications subject to change without notice
17 VACUUM PUMP Minimultiple Pump VTM(X) 5 x (2, 3)Stack 10 [ Measure unit : mm] (mm) 240 Specifications subject to change without notice.
18 VACUUM PUMP Minimultiple Pump VTM(X) 5 x (4~16)Stack 10 VACUUM PUMPS VTF 06-IN (See page : 318) [ Measure unit : mm] (mm) Specifications subject to change without notice
19 VACUUM PUMP Midimultiple Pump M-Midimultiple Pump Max. vacuum level Max. flow rate Supply air pressure Supply air type Working temperature Noise level :-85 kpa(-25.1 inhg) :220 Nl/min x N Stack (7.77scfm x N stack) :4~6bar, max 7bar (58~87 psi, max 101.5psi) : Dry compressed air :-20~ 80 :50~65 A Main Advantages Basically this pump is similar function with mini multiple stack pump. Each individual pump can be stacked up thus creating a modular manifold based system. The advantages of this unit is that it can be operated with one supply air port and activating individual vacuum pump which mounted on the manifold, as the result if any leakage occurs due to product surface deformation of one vacuum pad, it will not affect the vacuum performance in other vacuum pads. This pump can be stacked up from 2stack to 6stacks, depending on the requirment. This pump has sealing option of VITON and EPDM for corrosive and acidic application. Also, can be integrated vacuum filters directly on the pumps. VTM10 x 6 - B - A3 - CL - V 242 Specifications subject to change without notice.
20 VACUUM PUMP Midimultiple Pump VACUUM PUMPS Specifications subject to change without notice
21 VACUUM PUMP Midimultiple Pump X - Midimultiple Pump Max. vacuum level Max. flow rate Supply air pressure Supply air type Working temperature Noise level :-92 kpa( inhg) :185 Nl/min x N Stack (6.53 scfm x N stack) :4~6bar, max 7bar (58~87 psi, max 101.5psi) : Dry compressed air :-20~ 80 :50~65 A Main Advantages The X-Midimultiple pump has the same external dimension to X-Midimultiple pump. It enabling it to achieve higher vacuum level. Each individual pump can be stacked up thus creating a modular manifold based system. The advantage of this pump is that it has a bigger vacuum port as the applications requriing large vacuum flow and high vacuum level. If any leakage occurs due to product surface deformation of one vacuum pad, it will not affect the vacuum performance in the other pads. This pump can be stacked up from 2 stacks to 6 stacks. Also,can be specified with an air control solenoid valve and with Viton or EPDM as seal options. VTX10 x 6 - B - A3 CL - V 244 Specifications subject to change without notice.
22 VACUUM PUMP Midimultiple Pump VACUUM PUMPS Specifications subject to change without notice
23 VACUUM PUMP Midimultiple Pump VTM(X) 10 x (2~6)-NB B Model VTM(X)10x2-B,NB VTM(X)10x3-B,NB VTM(X)10x4-B,NB VTM(X)10x5-B,NB VTM(X)10x6-B,NB VTM(X)20x2-B,NB VTM(X)20x3-B,NB VTM(X)20x4-B,NB VTM(X)20x5-B,NB VTM(X)20x6-B,NB VTM(X)30x2-B,NB VTM(X)30x3-B,NB VTM(X)30x4-B,NB VTM(X)30x5-B,NB VTM(X)30x6-B,NB (mm) L1 L VTF 38-IN (See page : 318) 1 [ Measure unit : mm] 246 Specifications subject to change without notice.
24 VACUUM PUMP Midimultiple Pump VTM 10 x (2~6)-NC C Model VTM(X)10x2-C,NC VTM(X)10x3-C,NC VTM(X)10x4-C,NC VTM(X)10x5-C,NC VTM(X)10x6-C,NC VTM(X)20x2-C,NC VTM(X)20x3-C,NC VTM(X)20x4-C,NC VTM(X)20x5-C,NC VTM(X)20x6-C,NC VTM(X)30x2-C,NC VTM(X)30x3-C,NC VTM(X)30x4-C,NC VTM(X)30x5-C,NC VTM(X)30x6-C,NC (mm) L1 L VACUUM PUMPS 1 VTF 38-IN (See page : 318) [ Measure unit : mm] Specifications subject to change without notice
25 VACUUM PUMP Duplex Pump M-Duplex Pump Max. vacuum level Max. flow rate Supply air pressure Supply air type Working temperature Noise level :-85 kpa(-25.1 inhg) : 390 Nl/min (13.77scfm) :4~6bar, max 7bar (58~87 psi, max 101.5psi) : Dry compressed air :-20~ 80 :57~65 A Main Advantages M-Duplex pump is similar to the block type in that it uses the components of the mini type multi stage vacuum pump. The pumps are mounted onto a dual station manifold. This manifold enables compact and simple installation. The manifold can accommodate two VTM30 pumps thus producing a VTM60, which gives high flow rates in a compact format. A vacuum switch can be ordered with the unit which piggy backs one of the pumps again for compact and easy installation. There is an option for mounting the exhausts one either side or both on one end of the manifold. There is also the option of connecting vacuum and air supply connections on either side of the manifold block, vacuum connections are BSP 1/2X2. VTM20KD - C - V 248 Specifications subject to change without notice.
26 VACUUM PUMP Duplex Pump VACUUM PUMPS Specifications subject to change without notice
27 VACUUM PUMP Duplex Pump X - Duplex Pump Max. vacuum level Max. flow rate Supply air pressure Supply air type Working temperature Noise level :-92 kpa( inhg) : 332 Nl/min (11.72 scfm) :4~6bar, max 7bar (58~87 psi, max 101.5psi) : Dry compressed air :-20~ 80 :57~65 A Main Advantages The Duplex VTX type is similar to the mini block type in that it uses the components of the mini type multi stage vacuum pump. The X- Duplex has the same external dimensions to that of the M-Duplex, however the internal ejector system is different to enable higher levels of vacuum to be achieved. The pumps are mounted onto a dual station manifold. This manifold enables compact and simple installation. The manifold can accommodate two VTX30 pumps thus producing a X-Duplex 60, which gives higher flow rates in a compact format. A vacuum switch can be ordered with the unit which piggy backs one of the pumps again for compact and easy installation. There is an option for mounting the exhausts one either side, or both on one end of the manifold. There is also the option of connecting. VTX20KD - C - V 250 Specifications subject to change without notice.
28 VACUUM PUMP Duplex Pump VACUUM PUMPS Specifications subject to change without notice
29 VACUUM PUMP Duplex Pump Standard VTM(X) 20KD 30 1 [ Measure unit : mm] Model L1 (mm) VTM(X)20KD 44.4 VTM(X)30KD Specifications subject to change without notice.
30 VACUUM PUMP Duplex Pump with switch S1 with switch (P)C,(P)G, (P)GA VACUUM PUMPS 1 [ Measure unit : mm] Model L1 (mm) VTM(X)20KD 44.4 VTMI(X)30KD 51.6 Specifications subject to change without notice
31 VACUUM PUMP Duplex Pump Standard VTM(X) 40KD [ Measure unit : mm] Model L1 (mm) VTM(X)40KD 44.4 VTM(X)50KD 51.6 VTM(X)60KD Specifications subject to change without notice.
32 VACUUM PUMP Duplex Pump with swicth S1 with switch (P)C,(P)G, (P)GA VACUUM PUMPS [ Measure unit : mm] Model L1 (mm) VTM(X)40KD 44.4 VTM(X)50KD 51.6 VTM(X)60KD 51.6 Specifications subject to change without notice
33 VACUUM PUMP Conveying Pump Conveying Pump (Air Movers) VTRA Pump Max. vacuum level Max. flow rate Supply air pressure Supply air type :-84.4 kpa ( inhg) :3396 Nl/m(119.9 scfm) :4~6bar, max 7bar (58~87 psi, max 101.5psi) : Dry compressed air Main Advantages This is a series of adjustable flow rate single stage vacuum pumps particularly good for use in high contamination areas where dust and small debris is likely to enter the vacuum line. The design of this pump enables particles and small debris to pass directly through the pump. High flow rates can be achieved in conjunction with vacuum levels down to -84.4Kpa whilst maintaining a high performance to air consumption ratio. VTRF Pump Max. vacuum level Max. flow rate Supply air pressure Supply air type :-33.8 kpa (-9.98 inhg) :4670 Nl/m(164.9 scfm) :4~6bar, max 7bar (58~87 psi, max 101.5psi) : Dry compressed air Main Advantages These pumps provide a reliable and cost effective solution for in line product transfer, particularly for transferring bulk materials, granules, continuous strips and powders. Like the VTRA the pump has a straight through design, hence they are non-clogging and maintenance free.high flows can be achieved with in line bore sizes up to 1 1/2. VTRA AL VTRF AL 256 Specifications subject to change without notice.
34 257 Specifications subject to change without notice. VACUUM PUMPS VACUUM PUMP Conveying Pump
35 VACUUM PUMP Conveying Pump VTRA Series VTRF Series 258 Specifications subject to change without notice.
36 VACUUM PUMP Conveying Pump Unloading vibrator feeders Reloading hoppers with plastic Regrind Transferring of engine valves in grinding operation Chip removal in drilling operation Transfer power detergent and caustic chemicals Convey peanut husks Selvedge removal in trimming operation Mandrel collection system VACUUM PUMPS Specifications subject to change without notice
37
38 CLASSIC PUMPS
39 VACUUM PUMP L-Classic Pump L-Classic Pump Max. vacuum level Max. flow rate Supply air pressure Supply air type Working temperature Noise level Main Advantages This is most significant model base on the multi stage principle. Low compressed air are required for massive evacuation volumes at high vacuum flow and high vacuum level rate. Vtec air saving kit is available in this pump in order to maximum reduce the energy usage. VITON & EPDM seals can be also stipulated as option. :-91 kpa( inhg) : 1370 Nl/min (48.43 scfm) :3~6bar, max 7bar (43.5~87 psi, max 101.5psi) : Dry compressed air :-20~ 80 :50~65 A VTM25L A - AS - A3 R3 - CL SG2 N V ( 108) 262 Specifications subject to change without notice. About BUS cable ( 340, 341)
40 VACUUM PUMP L-Classic Pump VACUUM PUMPS Specifications subject to change without notice
41 VACUUM PUMP L-Classic Pump Standard with AS - KIT [ Measure unit : mm] VTM25L VTM50L VTM75L VTM100L VTM125L VTM150L (mm) Model L1 L Specifications subject to change without notice.
42 VACUUM PUMP L-Classic Pump VACUUM PUMPS [ Measure unit : mm] (mm) Model L1 L2 VTM25L VTM50L VTM75L VTM100L VTM125L VTM150L Specifications subject to change without notice
43 VACUUM PUMP VL-Classic Pump VL-Classic Pump Max. vacuum level Max. flow rate Supply air pressure Supply air type Working temperature Noise level Main Advantages :-80 kpa( inhg) : 2061 Nl/min (72.78 scfm) :4~6bar, max 7bar (58~87 psi, max 101.5psi) : Dry compressed air :-20~ 80 :50~65 A VL-Classic pumps produces the high flow rate gradually while vacuum level is increasing so it is useful for leakage system. Vtec Air Saving kit is available in this pump in order to maximum reduce the energy usage. VITON& EPDM seals can be also stipulated as option. VTL A - AS - A3 R3 - CL SG2 N V ( 108) 266 Specifications subject to change without notice. About BUS cable ( 340, 341)
44 VACUUM PUMP VL-Classic Pump VACUUM PUMPS Specifications subject to change without notice
45 VACUUM PUMP VL-Classic Pump Standard with AS - KIT [ Measure unit : mm] (mm) Model L1 L2 VTL25 VTL50 VTL75 VTL100 VTL125 VTL150 VTL175 VTL Specifications subject to change without notice.
46 VACUUM PUMP VL-Classic Pump VACUUM PUMPS [ Measure unit : mm] (mm) Model L1 L2 VTL25 VTL50 VTL75 VTL100 VTL125 VTL150 VTL175 VTL Specifications subject to change without notice
47 VACUUM PUMP M-Classic Pump M-Classic Pump Max. vacuum level Max. flow rate Supply air pressure Supply air type Working temperature Noise level Main Advantages :-92 kpa( inhg) : 1580 Nl/min (55.8 scfm) :4~6bar, max 7bar (58~87 psi, max 101.5psi) : Dry compressed air :-20~ 80 :50~65 A This Classic VTM pump is probably the most commonly used multi Stage ejector it is available in a large range of sizes and configurations. Each pump comes complete with an exhaust silencer, gauge and fixing brackets. The body whilst robust is also lightweight. The housings are manufactured from PPS high grade plastic, which means most hazardous vapors, can be accommodated. Pump sizes range from a VTM25 to the high flow VTM200. All units are available with the option of an air saving kit and non-return valves. Viton and EPDM seals can also be stipulated as options. VTM A - AS - A3 R3 - CL SG2 N V ( 108) 270 Specifications subject to change without notice. About BUS cable ( 340, 341)
48 VACUUM PUMP M-Classic Pump VACUUM PUMPS Specifications subject to change without notice
49 VACUUM PUMP M-Classic Pump Standard with AS - KIT (mm) Model L1 L2 VTM25 VTM50 VTM75 VTM100 VTM125 VTM150 VTM175 VTM200 [ Measure unit : mm] Specifications subject to change without notice.
50 VACUUM PUMP M-Classic Pump VACUUM PUMPS [ Measure unit : mm] (mm) Model L1 L2 VTM25 VTM50 VTM75 VTM100 VTM125 VTM150 VTM175 VTM Specifications subject to change without notice
51 VACUUM PUMP X-Classic Pump X-Classic Pump Max. vacuum level Max. flow rate Supply air pressure Supply air type Working temperature Noise level Main Advantages :-97 kpa( inhg) :521 Nl/min (18.4 scfm) :4~6bar, max 7bar (58~87 psi, max 101.5psi) : Dry compressed air :-20~ 80 :55 ~ 65 A This Classic VTX type is a pump that bridges the gap between the High Flow VTM range and the High Vacuum VTH Range, giving a balance of the two. The X- Classic has the same external dimensions to that of the M-Classic, however the internal ejector system is different to enable higher levels of vacuum to be achieved. Each pump comes complete with an exhaust silencer, gauge and fixing brackets. The body whilst robust is also lightweight. The housings are manufactured from PPS high grade plastic, which means most hazardous vapors, can be accommodated. Pump sizes range from a VTX25 to the VTX75. All units are available with the option of an air saving kit and non-return valves. Viton and EPDM seals can also be stipulated as options. VTX A - AS - A3 R3 - CL - SG2 N V ( 108) 274 Specifications subject to change without notice. About BUS cable ( 340, 341)
52 VACUUM PUMP X-Classic Pump VACUUM PUMPS Specifications subject to change without notice
53 VACUUM PUMP X-Classic Pump Standard with AS - KIT [ Measure unit : mm] Model L1 VTX25 VTX50 VTX (mm) L Specifications subject to change without notice.
54 VACUUM PUMP X-Classic Pump VACUUM PUMPS [ Measure unit : mm] Model L1 L2 VTX25 VTX50 VTX (mm) Specifications subject to change without notice
55 VACUUM PUMP MM-Midiflex Pump MM - Midiflex Pump Max. vacuum level Max. flow rate Supply air pressure Supply air type Working temperature Noise level Main Advantages :-92 kpa( inhg) : 2200 Nl/min (77.69 scfm) :4~6bar, max 7bar (58~87 psi, max 101.5psi) : Dry compressed air :-20~ 80 :55 ~ 65 A This MM-Midiflex pump is a compact manifold based multi stage ejector multi pump arrangement. Much higher flow rates and fast evacuation times can be achieved with this type of pump. The pump features a pressure gauge and a vacuum gauge along with two G3/4ports for connecting more than one large bore vacuum pipe. As with most of the other pumps the MM-Midiflex can be specified with an air saving kit, and with Viton or EPDM as seal options. This manifold has a special design allowing you to choose between two vacuum ports suited for your application. The pumps to achieve a combination of high flow rates and the highest vacuum levels. VTMM100 - V34 - AS A3 - SG2 - N V ( 108) 278 Specifications subject to change without notice.
56 VACUUM PUMP MM-Midiflex Pump VACUUM PUMPS Specifications subject to change without notice
57 VACUUM PUMP MM-Midiflex Pump 100 VTMM (150) 200 with AS - KIT Model (mm) L1 [ Measure unit : mm ] VTMM100 VTMM150 VTMM Specifications subject to change without notice.
58 VACUUM PUMP MM-Midiflex Pump VTMM 200F with air supply control valve VACUUM PUMPS [ Measure unit : mm] Specifications subject to change without notice
59 VACUUM PUMP MX-Midiflex Pump MX - Midiflex Pump Max. vacuum level Max. flow rate Supply air pressure Supply air type Working temperature Noise level :-97 kpa( inhg) : 1355 Nl/min (47.85 scfm) :4~6bar, max 7bar (58~87 psi, max 101.5psi) : Dry compressed air :-20~ 80 :63 ~ 68 A Main Advantages This MX-Midiflex pump is a compact manifold based multi stage ejector multi pump arrangement. The MX-Midiflex has the same external dimensions to that of the VTMM, however the internal ejector system is different to enable higher levels of vacuum to be achieved. A good balance between higher flow rates and higher vacuum levels with fast evacuation times can be achieved with this type of pump. The pump features a vacuum gauge along with two 3/4ports for connecting more than one large bore vacuum pipe. As with most of the other pumps the MX-Midiflex can be specified with an air saving kit, and with Viton or EPDM as seal options. VTMX100 - V34 - AS - A3 - SG2 - N V ( 108) 282 Specifications subject to change without notice.
60 VACUUM PUMP MX-Midiflex Pump VACUUM PUMPS Specifications subject to change without notice
61 VACUUM PUMP MX-Midiflex Pump 100 VTMX (200) 300 [ Measure unit : mm] Model L1 (mm) VTMX100 VTMX200 VTMX Specifications subject to change without notice.
62 VACUUM PUMP MX-Midiflex Pump with AS - KIT VACUUM PUMPS [ Measure unit : mm] Model L1 (mm) VTMX100 VTMX200 VTMX Specifications subject to change without notice
63 VACUUM PUMP H-Classic / H-Midiflex Pump H - Classic / H - Midiflex Pump Max. vacuum level Max. flow rate Supply air pressure Supply air type Working temperature Noise level Main Advantages : kpa( inhg) : 1042 Nl/min (36.8 scfm) :4~6bar, max 7bar (58~87 psi, max 101.5psi) : Dry compressed air :-20~ 80 :60 ~ 65 A The H-Classic / H-Midiflex range produces the very highest vacuum levels, whilst maintaining good flow rates for quick evacuation time. There are three models to choose from two classic sharp pumps and one midiflex pump, ranging from VTH50 to the VTH300. As with most of the other pumps there are options for an air saving kit, integral non return valve and Viton or EPDM seals. VTH A - AS - A3 R3 - CL - SG2 N V ( 108) About BUS cable ( 340, 341) 286 Specifications subject to change without notice.
64 VACUUM PUMP H-Classic / H-Midiflex Pump VACUUM PUMPS Specifications subject to change without notice
65 VACUUM PUMP H-Classic / H-Midiflex Pump Standard with AS - KIT [ Measure unit : mm] (mm) Model L1 L2 VTH50 VTH Specifications subject to change without notice.
66 VACUUM PUMP H-Classic / H-Midiflex Pump VACUUM PUMPS [ Measure unit : mm] (mm) Model L1 L2 VTH50 VTH Specifications subject to change without notice
67 VACUUM PUMP H-Classic / H-Midiflex Pump Standard VTH 300 [ Measure unit : mm] 290 Specifications subject to change without notice.
68 VACUUM PUMP H-Classic / H-Midiflex Pump with AS - KIT VACUUM PUMPS [ Measure unit : mm] Specifications subject to change without notice
69 VACUUM PUMP L-Maxflex Pump L - Maxflex Pump Max. vacuum level Max. flow rate Supply air pressure Supply air type Working temperature Noise level :-91 kpa( inhg) : 6100 Nl/min (215.4 scfm) :3~6bar, max 7bar (43.5~87 psi, max 101.5psi) : Dry compressed air :-20~ 80 :55 ~ 68 A Main Advantages This is the most significant model based on the multi stage principle. Low compressed air are required for massive evacuation volumes at high vacuum flow and high vacuum level rate Vtec air saving kit is available in this pump in order to maximize the reduction of energy usage. The pumps utilize an integrally mounted large bore air supply ON/OFF valve as an option. Viton & EPDM seals can be also stipulated as an option as well. VTM150LEF - AS - A3 - SG2 - N V ( 108) 292 Specifications subject to change without notice.
70 VACUUM PUMP L-Maxflex Pump VACUUM PUMPS Specifications subject to change without notice
71 VACUUM PUMP L-Maxflex Pump VTM150LEF [ Measure unit : mm] 294 Specifications subject to change without notice.
72 VACUUM PUMP L-Maxflex Pump VTM200LEF VACUUM PUMPS [ Measure unit : mm] Specifications subject to change without notice
73 VACUUM PUMP L-Maxflex Pump VTM300LEF [ Measure unit : mm] (mm) Model L1 L2 VTM300LEF VTM400LEF VTM500LEF Specifications subject to change without notice.
74 VACUUM PUMP L-Maxflex Pump VTM600LEF 800 VACUUM PUMPS [ Measure unit : mm] (mm) Model VTM600LEF VTM800LEF L Specifications subject to change without notice
75 VACUUM PUMP M-Maxflex Pump M - Maxflex Pump Max. vacuum level Max. flow rate Supply air pressure Supply air type Working temperature Noise level :-92 kpa( inhg) : Nl/min (388.5 scfm) :4~6bar, max 7bar (58~87 psi, max 101.5psi) : Dry compressed air :-20~ 80 :55 ~ 68 A Main Advantages This range of M-Maxflex pumps produces the very highest flow rates, as the name denotes all the pumps uses a large bore common vacuum port with port sizes up to 2. This type of pump has many applications but is particularly useful for high leakage systems, porous materials centerising vacuum system and large vacuum circuits. The pumps are based around a manifold design and utilize an integrally mounted large bore air supply on/off valve as option. The pumps also come with vacuum and air pressure gauges with two options for positioning of the exhausts, mounting brackets are also supplied. Air saving kits and VITON & EPDM seals options are also available with this pump. VTMM200EF - AS - A3 - SG2 - N V ( 108) 298 Specifications subject to change without notice.
76 VACUUM PUMP M-Maxflex Pump VACUUM PUMPS Specifications subject to change without notice
77 VACUUM PUMP M-Maxflex Pump VTMM200EF [ Measure unit : mm] 300 Specifications subject to change without notice.
78 VACUUM PUMP M-Maxflex Pump VTMM300EF VACUUM PUMPS [ Measure unit : mm] (mm) Model L1 L2 VTMM300-EF VTMM400-EF VTMM500-EF Specifications subject to change without notice
79 VACUUM PUMP M-Maxflex Pump VTMM600EF 800 [ Measure unit : mm] Model L1 (mm) VTMM600-EF VTMM800-EF Specifications subject to change without notice.
80 VACUUM PUMP M-Maxflex Pump VTMM1000EF VACUUM PUMPS [ Measure unit : mm] Specifications subject to change without notice
81
82 MEGA PUMPS
83 VACUUM PUMP Mega Pump Mega Pump Max. vacuum level Max. flow rate Supply air pressure Supply air type Working temperature Noise level :-92 kpa( inhg) : Nl/min (510.6 scfm) :4~6bar, max 7bar (58~87 psi, max 101.5psi) : Dry compressed air :-20~ +80 :68 ~ 76 A Main Advantages The largest compressed air-driven vacuum pump in the market place, that is comparatively compact and light weight. This pump is mainly used on applications where larger air volume is to be evacuated or to compensate for the leakage flow must remarkable application for this pump will be in conveying system for granules, transferring bulk materials and powder. This unit is complete with vacuum gauge, pressure gauge and mechanical ON/OFF valve as standard. Air saving kit, solenoid valve, non-return valve, and with VITON or EPDM as seal options. VTML200 - AS - N V ( 108) 306 Specifications subject to change without notice.
84 VACUUM PUMP Mega Pump VACUUM PUMPS Specifications subject to change without notice
85 VACUUM PUMP Mega Pump VTML [ Measure unit : mm] 308 Specifications subject to change without notice.
86 VACUUM PUMP Mega Pump VTML VACUUM PUMPS (mm) Model L1 VTML600 VTML800 VTML1000 VTML L [ Measure unit : mm] Specifications subject to change without notice
VACUUM PUMP Midi Keyboard Pump
Midi Keyboard Pump Max. vacuum level Max. flow rate Supply air pressure Supply air type : VKX pump -92 kpa (-27.16 inhg) VKM pump -85 kpa (-25.1 inhg) : VKX pump 62 Nl/min (2.19 scfm) VKM pump 74 Nl/min
Vacuum Level. Max Vacuum -Kpa / Hg. Model A B C D E F G H ØI Supply Vacuum Exhaust CV05H / SK CV10H / SK
VACUUM VENTURI CV VACUUM VENTURI Anodized aluminum body All metal construction Maximum vacuum of 27 Hg Vacuum flow rates up to 8CFM Single stage technology HSK s include part presence switch R N CV 15
VMECA Vacuum Auto - Locking system
VMECA Vacuum Auto - Locking system www.vmeca.com Vacuum Auto Locking system Introduction In the automobile industries today, vacuum is widely used for a pick and place applications on automobile parts
Vacuum Generators. Catalogue Edition 2
Vacuum Generators Catalogue Edition 2 Switch Options S = SK = The fixed switch option is normally open and changes position at 12 Hg The adjustment of the SK model switch is between 6-16 Hg Features: Anodized
VACUUM PUMP P5010. Profit from new vacuum technology
VACUUM PUMP P5010 COAX THE NEXT DIMENSION IN VACUUM TECHNOLOGY Profit from new vacuum technology Patented COAX push-in technology Efficient use of energy Outstanding performance Slim and modular design
ZFC Series. Air Suction Filter. In-line Type with One-touch Fittings
Air Suction Filter ZFC Series N402 IN/OUT straight piping Lightweight molded resin parts Cartridge type element replacement One-touch fittings for easy installation and removal Series ZFC An in-line type
VACUUM CONVEYOR SYSTEM
ISO 9001 CERTIFIED 0575 Ⅱ 1Dc 90 C / Ⅱ 2 GD c 100 C VACUUM CONVEYOR SYSTEM Why!! We are VMECA Vacuum conveyor system? Minimal Maintenance Low Noise Level Automatic Filter Cleaning System Simple to Installation
Micro-venturis, series GVA
Micro-venturis, series GVA Reference V : vacuum outlet Coupling M F, 6 mm deep or Quick-connect coupling, tube 4 mm dia. or Male coupling, 4 mm dia.,. mm long ø. 4... Version GVA -- 44 GVASIL or GVASPO
Catalog 080-/USA Notes Vacuum Control Valves
Vacuum Control Valves Section Catalog 080-/USA Notes Vacuum Control Valves Catalog 080-/USA Index Vacuum Control Valves VA0 Vacuum Control Valves for Centralized Vacuum Systems VA0PSV & VA0PSP, -Port,
Multi-Stage Ejectors. Multi-Stage Ejectors SEM. Suction rate from 332 l/min to 2,370 l/min. Suitability for Industry-Specific Applications
Multi-Stage Ejectors Suction rate from 332 l/min to 2,370 l/min Suitability for Industry-Specific Applications Applications Multi-stage ejector for handling of cardboard, packing materials, insulating
DRY BULK MATERIAL HANDLING COMPONENTS. AFTER-MARKET SPARE PARTS. PNEUMATIC CONVEYING EQUIPMENT. PNEUMATIC CONVEYING COMPONENTS & SPARE PARTS
DRY BULK MATERIAL HANDLING COMPONENTS. AFTER-MARKET SPARE PARTS. PNEUMATIC CONVEYING EQUIPMENT. PNEUMATIC CONVEYING COMPONENTS & SPARE PARTS PNEUMATIC COMPONENTS AIRLOCKS, PARTS & ACCESSORIES Searching
SECTION 7 AX SERIES PUMPS
SECTION X SERIES PUMPS EDCO US www.edcousa.net : X PUMPS Z - ZERO BSE G /8 NPSF G / NPSF LRGE CPCITY G / NPSF General Information : Z: Zero Base (No Base) :4 G/8 NPSF Bases :5 - :6 G/ NPSF Bases : - :
Factors to consider when selecting a diverter valve
Factors to consider when selecting a diverter valve Selecting a diverter valve for your pneumatic conveying system can be a tough job, especially when you consider how many diverter valves are on the market.
Cylindrical Pumps. J-Series Cylindrical Venturi Pumps
J-Series Cylindrical Venturi Pumps The J-Series Venturi Vacuum Pumps utilize a fixed cartridge venturi design. J-Series pumps employ a cylindrical design for ease of installation and mounting into in-line
MULTISTAGE MICRO EJECTORS
MULTISTAGE MICRO EJECTORS MED07-E, MED10-E Specifications Basic model Item Media Operating pressure range MPa [psi.] Proof pressure MPa [psi.] Operating temperature range (atmosphere and media) C [ F]
MULTI JECTOR Vacuum Pumps
VOLKMANN MULTI JECTOR Vacuum Pumps and Vacuum Components by VOLKMANN multiple stage ejectors energy-saving compact ejectors stainless steel Vacuum Pumps vacuum switches vacuum filters VOLKMANN has been
MICRO EJECTORS. Micro ejector single unit (without solenoid valve) ME. Micro ejector with solenoid valve DC24V. Block-off plate ME MA-BP
Micro Ejector Order Codes Manifold Order Codes Micro ejector single unit (without solenoid valve) ME Body model nozzle diameter : Maximum flow rate on vacuum side 03 0.3 : 3.0R/min. [0.012in., 0.106ft.
MULTISTAGE MICRO EJECTORS CONTENTS ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS. Caution
ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS MULTISTAGE MICRO EJECTORS CONTENTS MED07-E, MED10-E Series Specifications 715 Order Codes 716 Operation Principle
Ejector, Series EBS push-in fitting electrical control, T-design with release valve with silencer
Type Ejector Ambient temperature min./max. + C / + C Medium temperature min./max. + C / + C Working pressure min./max. 3 bar / 6 bar Medium Compressed air Max. particle size µm Oil content of compressed
Simple venturis, series GVP
Simple venturis, series GVP 5-bar compressed air network 45 13 5 35 L1 Exhaust D1 L 1/4 gas, 6x8 quick-connect or 4x6 quick-connect D 30 Connection for options 6 Vacuum 1/ gas Vacuum generators in series
About Pre-Separators. When a Pre-Separator is to be used the following should be considered: Pre-Separators should be used: Dustcontrol Pre-Separators
Pre-Separators When large quantities of material are to be separated, it is advisable to use a pre-separator. The pre-separator can be placed at the workplace or in conjunction with the central unit. 49
Syslog Technologies Innovative Thoughts
AUTOMATIC PNEUMATIC WATER PUMPING SYSTEM SYNOPSIS The aim of the project is pneumatic operated water pumping system. Radial plunger Pneumatic Water pumping system are reciprocating pump in which the piston
Vacuum generation Compact ejectors
Energy saving function by integrated pressure control saves up to 5 % of energy q = Vacuum connection z = Compressed air connection Product notes s = Exhaust outlet Check valve with wire mesh to keep out
UNIDIRECTIONAL Knife Gate Valve
12/04/2016 UNIDIRECTIONAL Knife Gate Valve Unidirectional knife gate valve. Mechanically welded body. Various seat and packing materials available. Face to face dimension in accordance with standard, it
Mark 5108 Series. Back Pressure Regulating Valves Mark 5108 Series. Back Pressure Regulating Valves. Valve Features. Operation
Mark 5108 Series Back Pressure Regulating Valves In many liquid piping systems, it is vital that line pressure is maintained within relatively narrow limits. The Mark 5108 is designed to do just that.
Ergonomic Handling Solutions. Vacuum Handling Systems Tube Lifters Jumbo and Lifting Devices VacuMaster
Ergonomic Handling Solutions Vacuum Handling Systems Tube Lifters Jumbo and Lifting Devices VacuMaster 53 Vacuum Tube Lifters Jumbo Introduction Application Fast and frequent lifting and moving of workpieces
Eurovacuum EVC Series
Eurovacuum EVC Series Dry Running Claw Vacuum Pump Eurovacuum EVC Series Dry Running Claw Vacuum Pumps Eurovacuum Company is offering its various products to meet industrial vacuum needs. Eurovacuum Company
Camlocks. Snaplock Camlock Couplings. The original Snaplock quick release coupling. Applications
Snaplock Camlock Couplings The original Snaplock quick release coupling The tried & trusted cam coupling with the high reputation of the Snaplock brand name offering additional features to our standard
AVL SERIES. Technical Specifications. Compressed Air Loaders. Features
Material Handling Process Cooling Temperature Control Size Reduction Compressed Air Loaders Technical Specifications Features (Shown with Optional Sight Glass) AVL loaders are designed to provide trouble-free
SERIES. The Ultraflo Transport Line Resilient Seated Butterfly Valves: Specifically Designed for use in the Bulk Trailer Industry.
The Ultraflo Transport Line Resilient Seated Butterfly Valves: 2-12 Specifically Designed for use in the Bulk Trailer Industry 390 SERIES 400 SuperioR Performance STRONGER Construction Ultraflo proudly
CUP ACCESSORIES SECTION 4 FLOW VALVES, CHECK VALVES, MECHANICAL VALVES, SWIVEL JOINTS, & TEE ADAPTORS EDCO USA.
CUP ACCESSORIES SECTION FLOW ALES, CHECK ALES, MECHANICAL ALES, SWIEL JOINTS, & TEE ADAPTORS 0 EDCO USA. www.edcousa.net : CUP ACCESSORIES CONTENTS DUAL FLOW ALE TRI-FLOW ALE FLOW SENSOR ALE RELEASE CHECK
C 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 G1/4 8,5
CL/CM UNIVERSAL Valves G1/8 - CHARACTERISTICS Ambient temperature Fluid Commutation system Pressure Max Connections Nominal bore (mm) Nominal flow rate (Nl/min) Valve body Seals Spool Electropilot/Coil
MICRO EJECTORS ME12, ME25, ME60. Specifications. Mass MICRO EJECTORS. Vacuum switches. Micro ejectors. Single and twin solenoid valves.
ME12, ME25, ME60 Specifications Micro ejectors Media Operating pressure range MPa [psi.] Operating temperature range C [ F] Nozzle diameter Note mm [in.] kpa [in.hg] flow rate Note R/min [ft. 3 /min.]
Eurovacuum EVC Series. Dry Running Claw Vacuum Pump
Eurovacuum EVC Series Dry Running Claw Vacuum Pump Eurovacuum EVC Series Dry Running Claw Vacuum Pumps Eurovacuum Company is offering its various products to meet industrial vacuum needs. Eurovacuum Company
LEM. mini-modules compact integrated vacuum pumps. US3
mini-modules compact integrated pumps LEM TM www.coval.com US3 LEM LEM series: mini-module pressure OUT IN 2 exhaust TM certified quality management system All industrial functions integrated into the
Vacuum Components SHREE VYANKATESHWARA E N T E R P R I S E S
CKD Actuators Pneumatic Valves Pneumatic Auxiliary Components Pneumatic Auxiliary Components (Main Line Unit) Pneumatic Filter, Regulator, Lubricator (F.R.L. Unit) Related Pneumatic Products DD Actuator
All rights reserved. Copyright Jouka Oy. Ver. 2 (2007).
TABLE OF CONTENTS Decisive benefi ts............................ 3-5 Aluminium valves............................. 6 Steel valves................................ 7 Stainless steel valves...........................
DUST COLLECTOR (BOTTOM REMOVAL BAG & CAGE) INSTALLATION AND OPERATING INSTRUCTIONS
4080 SE International Way. Suite B110, Milwaukie, OR 97222 (503) 654-0867 Fax: (503) 654-4671 email: ftech@filtertechnologyltd.com www.filtertechnologyltd.com DUST COLLECTOR (BOTTOM REMOVAL BAG & CAGE)
Pelletising Systems. Moulding & Recycling Underwater pelletising systems for up to 15,000kg/hr. Strand pelletisers
Pelletising Systems 0 Underwater pelletising systems for up to 5,000kg/hr Our modular pelletising systems are highly cost efficient & cover a wide range of applications: Primary pelletising Masterbatch
General Engineering Spray Nozzles & Accessories
General Engineering Spray Nozzles & Accessories 3 GENERAL SPRAY NOZZLES & ACCESSORIES Clip On Spray Nozzles SWIVELING ANGLE ADJUSTMENT SPRAY CHARACTERISTICS : These nozzles simply clip over a pre-drilled
Miniature Venturi Vacuum Pump with Pneumatic Blow-off and Silencer
Miniature Venturi Vacuum Pump with Pneumatic Blow-off and Silencer Fastbreak Mini Series: VP0X & VP0X-ADJ VP0X-60 Fastbreak blow-off pump with vacuum cup, spring leveler assembly for rapid part release
Prodigy HDLV Pump. Customer Product Manual Part A02
Prodigy HDLV Pump Customer Product Manual Issued 1/07 For parts and technical support, call the Industrial Coating Systems Customer Support Center at (800) 433-9319 or contact your local Nordson representative.
1" 42" SBP Butterfly Valves plastomer-lined PM 51 us /
1" 42" SBP Butterfly Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive process media in either liquid, powdery or gaseous state. Modular Design Valves are available
Quality in vibrators. Pneumatic vibrators for industries. Conveying Filling Compacting Separating. Detailed technical data:
Quality in vibrators Pneumatic vibrators for industries Detailed technical data: www.findeva.com Conveying Filling Compacting Separating Findeva AG Loostrasse 2 CH-8461 Oerlingen Switzerland www.findeva.com
White Paper Piston spool valves and poppet valves A technical comparison of available solenoid valves
White Paper Piston spool valves and poppet valves A technical comparison of available solenoid valves Why should you choose your valves carefully? The increasing demands placed on valve technology in recent
LEM. mini-modules compact integrated vacuum pumps. US5
mini-modules compact integrated pumps LEM TM www.coval.com US5 LEM LEM Series: Mini-Module pressure OUT IN 2 exhaust TM certified quality management system 40% energy savings (on average, see p.5). No
DN25 DN1000 resp. 1" 42"
DN25 DN1000 resp. 1" 42" SBP Butterfly Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive process media in either liquid, powdery or gaseous state. Modular Design
Vacuum Generators. Section B.
Section www.parker.com/pneu/vacgen 2 asic Generator Selection How to Select a Generator 4-9 Inline : Single Stage MCA, CV, CV-CK MCA is lightweight generator that can be located directly on the cup fitting
Conveyor systems. Hinged belt conveyors page 448 Proven for a wide range of disposal tasks. Scraper conveyors page 456 For disposal of small materials
Conveyor systems Reliability and experience based on tradition PLUS Hinged belt page 448 Proven for a wide range of disposal tasks Scraper page 456 For disposal of small materials LIFE- Safety Cables Modular
SAFETY MANUAL READ FIRST!
966-05-XX SAFETY MANUAL READ FIRST! IMPORTANT: READ THESE WARNINGS AND SAFETY PRECAUTIONS PRIOR TO INSTALLATION OR OPER- ATION. FAILURE TO COMPLY WITH THESE INSTRUC- TIONS COULD RESULT IN PERSONAL INJURY
GRAVITY FLOW. DILUTE PHASE PNEUMATIC CONVEYING (Pressure or Vacuum) DENSE PHASE PNEUMATIC CONVEYING SEAL TITE DIVERTER
The Vortex Seal Tite Diverter is designed for use in gravity flow applications where material can be diverted from one source to either two or three destinations. The Seal Tite Diverter offers a removable
Vacuum Filters. Catalogue Edition 2
Vacuum Filters Catalogue Edition 2 INLINE VACUUM FILTERS Vacuforce plastic in-line filters provide easy monitoring, economy and safety. These shatterproof filters are 100% airtight, can withstand high
mini-modules compact integrated vacuum pumps LEM
mini-modules compact integrated pumps LEM TM www.coval.com LEM LEM series: mini-module pressure OUT IN 2 exhaust TM All industrial functions integrated into the mini-module Efficient communication for
Mobrey 003 Ultrasonic Liquid Level Switch
Product Data Sheet Mobrey 003 Ultrasonic Liquid Level Switch Self-contained liquid level alarm Manufactured in Polyphenylene Sulphide (PPS) for corrosion resistance in most liquids Threaded process connections
With Integral Filter and Silencer, Optional Vacuum Switch, Type VADM- Solenoid-Actuated Vacuum Generator with integral filter and silencer Type VADM-
Features and Benefits Solenoid-Actuated Vacuum Generators Types VADM-... / VADMI-... l Integral Filter, Silencer, Manual Override l Integral Solenoid Valve for Controlling Air Supply l Vacuum Range up
GMK EV SERIES. Single Stage Oil Sealed Rotary Vane Pump
GMK EV SERIES Single Stage Oil Sealed Rotary Vane Pump EV Series Single Stage Oil Sealed Rotary Vane Pumps Eurovacuum Company is offering its various products to meet industrial vacuum needs. Eurovacuum
INSPECTION. 3. INSPECT FUEL TANK CAP Visually check if the cap and/or gasket are deformed or damaged. If necessary, repair or replace the cap.
EMISSION CONTROL EC5 EC0E601 INSPECTION 1. INSPECT LINES AND CONNECTORS Visually check for loose connections, sharp bends or damage. 2. INSPECT FUEL TANK FILLER PIPE Visually check for deformation, cracks
OIL FREE SCREW COMPRESSORS XK RANGE
OIL FREE SCREW COMPRESSORS XK RANGE The Range XK machines are a range of contactless, oil free, screw type compressors designed to discharge all types of dry products from road tankers. This leading design
Smart Fume Extractor
The most efficient solution Smart Fume Extractor The most efficient solution. It only works when soldering and features a unique system integrated into the stand JBC takes fume extractors to a higher level
From grippers to complete turnkey vacuum handling systems, Joulin is flexible and offers a quick response to supply the best solution for you.
Family owned, JOULIN invented the foam vacuum gripper over 50 years ago; we continue to pioneer advances in vacuum technology today. Whether you are picking a complete layer, partial layer or single part,
KNIFE GATE VALVES -- MODEL D
PRODUCT DESCRIPTION Flanged unidirectional knife gate valve for high pressure applications One piece integral cast body with seating wedges and bolted bonnet. High flow rates with low pressure drops. Several
Vacuum gripping systems Contents
Vacuum gripping systems Contents Vacuum gripping systems at a glance... 16 Customized vacuum grippers... 17 Standard vacuum grippers... 18 15 Vacuum gripping systems Vacuum gripping systems at a glance
LEDGELESS VERTICAL CARTRIDGE DUST COLLECTOR
RIES Platinum Cartridge Dust Collectors LEDGELESS VERTICAL CARTRIDGE DUST COLLECTOR 7 to 10 Gauge Construction 1'' Goyen Valves Goyen Solenoid lock Kit Service Ladder and Platform (optional) Manual Cam
NUKON AUTOMATION SHEET STORAGE SYSTEMS
1 NUKON AUTOMATION SHEET STORAGE SYSTEMS NUKON AUTOMATION SHEET STORAGE SYSTEMS 2 AUTOMATION LASERS WHICH INCREASE YOUR PRODUCTION EFFICIENCY Nukon automation systems increase your machines productivity
Wafer Grippers. Wafer Grippers SWGm. Two suction areas suitable for wafer sizes 125 x 125 mm and 156 x 156 mm
Wafer Suitability for Industry-Specific Applications Applications Wafer gripper for extremely fast and gentle handling of wafers and solar cells in the production processes Loading and unloading from stacks
KNIFE GATE VALVES -- MODEL A
PRODUCT DESCRIPTION Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. Several seat
Transportation Products
Transportation Products Butterfly Valves Hopper Tees Actuators Accessories A Name You ve Trusted for Years... Resilient Seated Butterfly Valves 400 & 480 Series 1 Piece Body Design This economical, resilient
Vacuum pumps/generators Small
picompact10 Ejector with COAX patented technology. Reduced air-consumption with 30-50% compared to other ejector technologies. Easy to optimize vacuum performance with a varied selection of micro multi-stage
Manifold QF. Contents. Description. Installation & Setup Guide. Safety 3. Introduction 3. Installation Standards 4. Specifications 5.
Contents Description Page Safety 3 Introduction 3 Installation Standards 4 Specifications 5 Materials 5 Overall System Configurations 6 Manifold Installation 7 Fixing Unit to Wall 7 Water Connection 8
AIR-T AIR-T AIR-T AIR-T
Exhaust Fan Units INDEX PAG. HIGH HEAD ASPIRATORS WITH SIDE GROOVE TURBINE KW m 3 /h mm H O 3 NC /70 TRAILER-MOUNTED WITH CYLINDER Ø 300, 35 000 3 NC 5/30 " " " " ",5 00 " 5 N 5/30A " " " " ",5 00 500
Innovative solutions for your handling projects
For a Compact and durable design, Look no further! Foams adjust to smooth and rough surfaces easily Level compensators allow the Mini-Gripper to adjust for uneven layer heights without changing the mount
Multi Processing Station with Oven 24V
- 536632 Multi Processing Station with Oven 24V I9 Q10 Q4 I1 O14 I8 Q7/Q8 I1 I3 I4 I2 Q3 not in the picture: Q1, Q2, Q5, Q6, Q9, Q11, Q12, Q13, I4, I5, I6, I7 Circuit layout of the Multi Processing Station
Smart Fume Extractor
Smart Fume Extractor The most efficient solution. It only works when soldering and features a unique system integrated into the stand JBC takes fume extractors to a higher level with its new smart Fume
Prodigy HDLV Pump Manifold and Circuit Board
Prodigy HDLV Pump Manifold and Circuit Board Customer Product Manual Issued 05/08 For parts and technical support, call the Finishing Customer Support Center at (800) 433-939. This document is available
DIAMOND SERIES. With DHP Advantages
DIAMOND SERIES www.novarotors.com With DHP Advantages DIAMOND SERIES Nova Rotors presents its new range of progressing cavity pumps called the Diamond Series. Completely renewed mechanics to increase the
Piston spool valves and poppet valves - A technical comparison of available solenoid valves
Piston spool valves and poppet valves - A technical comparison of available solenoid valves White Paper This whitepaper includes information on: An introduction to valve technologies Poppet valves, piston
Vacuum Accessories. Pneumatic. Section E. Pneumatic. Parker Hannifin Corporation Pneumatic Division Richland, Michigan
Vacuum Accessories Section E E 1 Notes 2 Index Contents Convum Filters... 4-5 Convum Silencers... 6 Silencer (Flow Thru)... 7 ASN Series Air Line Mufflers... 8 E 3 (Revised 10/13/04) Ordering Information
Miniature Venturi Vacuum Pump with Solenoid Operated Vacuum and Blow-off
Modular Venturi Vacuum Pumps with Solenoid-Operated Vacuum and Blow-Off Miniature Venturi Vacuum Pump with Solenoid Operated Vacuum and Blow-off Fastvac Mini Series: VP01QR-60 VP01QR-60H/24vDC Standard
POWER TRANSMISSION. Product range
POWER TRANSMISSION Product range Product range Business Unit Power Transmission Since the firm was established in 1911 by Wilhelm Binder, the Power of Magnetism has always been the essential principle
UCC Series Co-Axial Drive Pneuma-Hydraulic
UCC Series Co-Axial Drive Pneuma-Hydraulic 40mm - 200mm bore sizes Features Co-Axial Drives (UCC) consist of two integral elements; a pneumatic drive unit to provide power and an integrated, closed circuit
Process Inline Filter PLF1
Process Inline Filter PLF1 10 bar 16 bar Specifications Nominal size: DN 50 DN 150 Q s max: 200 m 3 /h p s max: 16 bar Filtration ratings: 1 90 µm 1. GENERAL Product description Continuous separation of
BIDIRECTIONAL WAFER Knife Gate Valve
05/10/2012 BIDIRECTIONAL WAFER Knife Gate Valve Bidirectional wafer design knife gate valve. Monoblock one piece cast iron body. Stainless steel gate. Two rubber sleeves. Provides high flow rates with
Miniature Solenoid Valves
Miniature Solenoid Valves Our IPS Miniature Solenoid Valves offer precision performance under extreme conditions. Offered as 2-Way and 3-Way Valves with four internal body configurations and five seat
Mechanical Vacuum Lifters
Self-Powered, Self-Cycling Mechanical Vacuum Lifters The Leading Sheet & Plate Lifters in North America Since 1968 The Unique Design Allows You to Attach to Any Crane Hook and Lift Made in USA by ANVER
SBE Butterfly Valves elastomer-lined PM 52 e / Modular Design
DN40 DN800 resp. 1½" 32" SBE Butterfly Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive process media in either liquid, powdery or gaseous state. Modular Design
CONTENTS. History. Joulin s Performance. Joulin s System. Options. Questionnaire
1 CONTENTS History Joulin s Performance Joulin s System Options Questionnaire HISTORY from1969 to today History JOULIN, since its formation 50 years ago, has dealt with wood stacking/destacking applications.
CATALOG. Actuated Diaphragm Valve DN PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL.
CATALOG Actuated Diaphragm Valve DN 15-100 PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL. TABLE OF CONTENTS Type 186 - DN 12-15 (MA 10) 04 General information - Technical specification 04 Sectional
Industrial Pneumatic Systems Syllabus [Detailed]
![Industrial Pneumatic Systems Syllabus [Detailed]](/thumbs/81/83340511.jpg "Industrial Pneumatic Systems Syllabus [Detailed]")
TECHNICAL TRAINING - SWAPPING DOWNTIME FOR PRODUCTIVITY! Industrial Pneumatic Systems Syllabus [Detailed] 1. Fundamentals of Fluid Power Systems. The three states of matter. Definition of a fluid. Derivation
INSPECTION. 3. INSPECT FUEL TANK CAP Visually check if the cap and/or gasket are deformed or damaged. If necessary, repair or replace the cap.
EC8 EMISSION CONTROL (2RZFE, 3RZFE) EC0LY01 INSPECTION 1. INSPECT LINES AND CONNECTIONS Visually check for loosen connections, sharp bends or damage. 2. INSPECT FUEL TANK Visually check for deformation,
Vacuum generators 1.1. High vacuum levels of up to 93% Easy connection of holders and suction cups. Lightweight and compact design.
High vacuum levels of up to 93% Easy connection of holders and suction cups Lightweight and compact design No wearing parts Long service life Vacuum monitoring with vacuum switch 2005/07 Subject to change
Configurable Cutting Chamber For Multiple Applications
Configurable Cutting Chamber For Multiple Applications The innovative and adaptable hardened cutting chamber on the Conair Viper Granulator 12-Series granulators allows these granulators to be configured
Phone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model BPS-05-NPT Stainless Steel Back Pressure Regulator Valve
stream and green PUMPING The new PCM Delasco DX series DX65 - DX80 - DX100
stream and green PUMPING The new PCM Delasco DX series DX65 - DX80 - DX100 MOVING CONCENTRATED FLUIDS TO CUT DOWN YOUR PROCESSING COST Water is precious. Saving water has become paramount in industrial
Bulk Solids Feeding. Distributor for. Blow-Through Rotary Valves RVS Drop-Through Rotary Valves RVC
Bulk Solids Feeding Distributor for Blow-Through Rotary Valves RVS Drop-Through Rotary Valves RVC Blow-Through Rotary Valves RVS Drop-Through Rotary Valves RVC High filling efficiency and precise metering
GRANULATORS AND SHREDDERS. crushmaster.com
GRANULATORS AND SHREDDERS crushmaster.com RANGE OF MACHINES A SERIES BESIDE THE PRESS GRANULATORS Type: A 15 A 25 A 35 G SERIES ECONOMICAL GRANULATORS Type: G 30 G 45 G 60 H SERIES ECONOMICAL GRANULATORS
AMS 4711 media-compatible pressure transmitter for industrial applications in matchbox format
There is a general belief that piezoresistive pressure sensors are not suitable for measuring pressure in liquids e.g. for liquid level measurement. Taking the example of pressure transmitter AMS 4711
Features More than 30 years of expertise has gone into the design and manufacture of Todo-Matic range of Dry-Break couplings.
Features Applications: Road / Rail tanker loading / discharge ISO retrofit & new build IBC containers Offshore rig supply Pharmaceutical processing Vapor Recovery Ship to shore / ship / rig transfer Ship
HES810 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE
ispeed E0 E0 E00 E000 ø0." ø0.9" ø0." ø0.9" HES0 -p0 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE Specifications Speed... 0,000-0,000 min - (rpm) Ideal Operating Speed... 0,000-0,000 min - (rpm) Max. Output
Quality in vibrators. Pneumatic vibrators for industries. Conveying Filling Compacting Separating. data
Quality in vibrators Pneumatic vibrators for industries a.com l chnica e T d e l Detai indev f. w w :w data Conveying Filling Compacting Separating Findeva AG Loostrasse 2 CH-8461 Oerlingen Switzerland
Butterfly valves Leakage butterfly valves Ball valves
SO EVERYTHING KEEPS FLOWING Butterfly valves Leakage butterfly valves Ball valves Quality down to the smallest detail Butterfly valves and ball valves are the most used shutoff devices in process engineering.