SERIES PA SWING ARM CLAMPS for the Automotive Industry

Pa SERIES PA SWING ARM CLAMPS for the Automotive Industry Ideal for a wide variety of automated part holding and transfer applications Copper Arm Switches Installed

ORDERING DATA: SERIES PA CLAMPS INDEX: Ordering Data Page 2 Benefits Page 3 Dimensions Page 4 Engineering Data Page 5 Options & Kits Pages 6 to 8 Parts List & Exploded View, Application Concerns Page 8 OPTIONS BLANK - None SW1-2 Reed Switches provided SW2-2 Hall Effect Switches (PNP) provided SW3-2 Hall Effect Switches (NPN) provided SW4-2 Magnetoresistive Switches (PNP) w/quick Connect provided SW5-2 Magnetoresistive Switches (NPN) w/quick Connect provided TO ORDER SPECIFY: Model, Body Style, Unit Size, Arm Rotation Direction, Design No., and Additional Options if desired. ARM OPTIONS BLANK - None AS -Single Steel ASC -Single Copper DESIGN NO. 1 - Imperial 5 - Metric UNIT SIZE 2-25 Bore 3-32 Bore 4-40 Bore 5-50 Bore 6-63 Bore MODEL R - 1 - AS - TA - SW1 - LBB 2 PA S PORT FITTINGS (BOTH PORTS) BLANK - None LBB -90 Swivel Fitting (See Note 1) SPINDLE OPTIONS BLANK - None TA -Steel TN - Neoprene Tipped ARM ROTATION DIRECTION* R - Right L - Left BODY STYLE S - Standard (Block) NOTE: 1) 90 Swivel fittings not available on size 2 units. RIGHT LEFT ARM SPINDLE ARM DOWN CLAMP PORT CLAMP ARM UP RELEASE PORT *NOTE: Rotation is the direction the arm rotates when clamping and looking down at rod end. 2 Copyright 2016, by PHD, Inc. All Rights Reserved. Printed in the U.S.A.

SERIES PA CLAMPS IDEAL FOR A WIDE VARIETY OF AUTOMATED PART HOLDING AND TRANSFER APPLICATIONS steel and copper arms are supplied for standard and welding applications mounting patterns on three surfaces of the rectangular body provide flexibility in design and clamp mounting flow controls are not required body has controlled orifice counication steel and Neoprene-tipped spindles are available for clamping rugged or show finishes switch ready Reed and Hall Effect Switches are available for easy interfacing to electronic controls and logic systems simple design employs a hardened helical spline and three hardened drive balls, which ensure a long product life with little wear left and right rotations can be ordered to fit the application Major Benefits Simple design, compact size, for low weight, long life, and high clamp force make these clamps ideal for part holding or transfer Available in five sizes Mounting patterns on three surfaces Available in left and right rotations 24 hour delivery Industry Uses Welding equipment Door & window frames Assembly machine builders Machine tool (work holding) Aerospace Automotive Tier II and Tier III 3

DIMENSIONS: SERIES PA CLAMPS SA8 SURFACE X 90 (LEFT) ARM RELEASED B3 MP2 SA11 SHCS THRU & CBORED FOR MP3 SHCS MP4 THREAD x MP5 DEEP (FROM OPPOSITE SIDE) ARM CLAMPED MP1 R1 5 SLOTS 90 (RIGHT) ARM RELEASED SA9 P3 DETAIL A SA10 SQUARE S2* S3* S1* P (CLAMP PORT) A SA7 SA1 SA6 MP5 SA2 MP6 P2 P1 2X THRU FOR MP8 SHCS MP9 B2 DIM B1 B2 B3 B4 B5 MP1 MP2 MP3 MP4 MP5 MP6 MP7 MP8 MP9 P P1 P2 P3 R1 S1* S2* S3* SA1 SA2 SA3 SA4 SA5 SA6 SA7 SA8 SA9 SA10 SA11 in 2.165 3.071 1.378.295.295 1.575.787 M6 x 1.25.787 1.260 1.575 2.795 71.0 10-32 M5.669 17.0 2.421 61.5.374 9.5.551 14.0 1.043 26.5.394 10.0.650 16.5 3.209 81.5 1.969 50.0 1.969 50.0 1.673 42.5 1.378 35.0 2.24-2.56 57.0-65.0 4.882 124.0 M6 x 1.0 thru 1.969.630 SA5 B4 P (RELEASE PORT) MP7 SA4 B5 B1 SA3 * NOTE: S1 = TOTAL STROKE S2 = ROTARY STROKE S3 = CLAMP STROKE PAS2x PAS3x PAS4x PAS5x PAS6x in in in in 55.0 2.362 60.0 2.756 70.0 3.346 85.0 3.937 78.0 3.543 90.0 3.543 90.0 3.937 100.0 3.937 35.0 1.772 45.0 2.165 55.0 2.559 65.0 3.150 7.5.295 7.5.354 9.0.374 9.5.394 7.5.492 12.5.610 15.5.846 21.5 1.083 40.0 1.772 45.0 2.047 52.0 2.598 66.0 3.150 20.0 1.181 30.0 1.457 37.0 1.811 46.0 2.362 20.0 32.0 40.0 50.0 16.0 M6 x 1.25.787 1.693 1.772 3.268 83.0 1/8 NPT 1/8 BSPP.827 21.0 2.854 72.5.492 12.5.630 16.0 1.181 30.0.551 14.0.630 16.0 3.780 96.0 2.047 52.0 2.283 58.0 1.870 47.5 1.575 40.0 2.36-2.87 60.0-73.0 5.709 145.0 x 1.25 thru 2.362.748 20.0 43.0 45.0 60.0 19.0 x 1.5.984 1.575 2.047 3.189 81.0 1/8 NPT 1/8 BSPP.787 20.0 2.854 72.5.551 14.0.630 16.0 1.181 30.0.512 13.0.669 17.0 3.740 95.0 2.165 55.0 2.520 64.0 2.146 54.5 1.791 45.5 2.36-2.87 60.0-73.0 5.670 144.0 x 1.25 thru 2.756.748 40.0 52.0 70.0 19.0 x 1.5 1.181 1.772 2.598 3.583 91.0 1/8 NPT 1/8 BSPP.984 3.091 78.5.669 17.0.787 20.0 1.161 29.5.571 14.5.591 15.0 4.193 106.5 2.362 60.0 2.756 70.0 2.303 58.5 1.929 49.0 2.17-2.95 55.0-75.0 6.339 161.0 M12 x 1.75 thru 3.150.984 30.0 45.0 66.0 80.0 M12 x 1.75 1.181 1.417 3.150 3.504 89.0 1/8 NPT 1/8 BSPP 1.102 28.0 3.150 80.0.787 20.0.787 20.0 1.181 30.0.512 13.0.669 17.0 4.193 106.5 2.717 69.0 2.913 74.0 2.461 62.5 2.067 52.5 2.17-2.95 55.0-75.0 6.358 161.5 M12 x 1.75 thru 3.543.984 100.0 100.0 80.0 10.0 27.5 80.0 60.0 30.0 36.0 80.0 90.0 4 All dimensions are reference only unless specifically toleranced.

ENGINEERING DATA: SERIES PA CLAMPS SPECIFICATIONS WORKING PRESSURE BODY PISTON ROD SEALS LUBRICATION TEMPERATURE LIMITS SERIES PA 40 psi min. - 100 psi max. 2.9 bar min. - 7 bar max. Hardcoated Aluminum Chrome Plated Steel Urethane Wiper and Rod Seal Nitrile Pistons and Static Seals Permanent for Non-Lube Air -20 to 180 F [-30 to 82 C] SPECIFICATIONS MODEL SIZE PAx2 PAx3 PAx4 PAx5 PAx6 BORE 25 32 40 50 63 THEORETICAL CLAMPING FORCE SINGLE ARM AT 87 psi (6 bar) lb N 46 204 82 365 143 636 223 992 378 1682 TOTAL STROKE 26.5 30 30 29.5 30 ROTARY STROKE 10 14 13 14.5 13 CLAMP STROKE 16.5 16 17 15 17 STROKE TOLERANCE - 0, + 2 ROTARY TOLERANCE including backlash deg 3 CLAMP WEIGHT lb 0.88 1.45 1.94 3.48 4.84 g 400 600 880 1580 2200 CLAMP MOUNTING KITS End mounting kit includes four alloy socket head cap screws for end mounting. Side mounting kit includes two alloy socket head cap screws for side mounting. DESCRIPTION END MOUNTING KIT - INCLUDES 4 SCREWS SIDE MOUNTING KIT - INCLUDES 2 SCREWS PAS2x 71110-02 M6 x 90 LG SHCS 71111-02 x 50 LG SHCS PAS3x 71110-03 M6 x 100 LG SHCS 71111-03 x 60 LG SHCS KIT NUMBER PAS4x 71110-04 x 100 LG SHCS 71111-04 x 70 LG SHCS PAS5x 71110-05 x 110 LG SHCS 71111-05 x 90 LG SHCS PAS6x 71110-06 x 110 LG SHCS 71111-06 x 100 LG SHCS 5

OPTIONS & KITS: SERIES PA CLAMPS AS SINGLE ARM - STEEL ASC SINGLE ARM - COPPER Single arms are made of steel or copper, one alloy socket head cap screw included. A3 A1 A4 DIM A1 A2 A3 A4 A5 D1 D2 H1 H2 H3 R1 PAx2x PAx3x PAx4x PAx5x PAx6x in in in in 66.0 3.150 80.0 3.543 90.0 4.134 105.0 4.528 16.0.748 19.0.748 19.0.984.984 6.0.354 9.0.354 9.0.394 10.0.394 50.0 2.362 60.0 2.756 70.0 3.150 80.0 3.543 20.0.984 1.378 35.0 1.378 35.0 1.772 14.0.551 14.0.551 14.0.669 17.0.669 8.5.335 8.5.335 8.5.413 10.5.413 16.0.748 19.0.748 19.0.984.984 6.0.354 9.0.354 9.0.472 12.0.472 6.0.276 7.0.276 7.0.354 9.0.354 14.0.630 16.0.630 16.0.787 20.0.787 in 2.598.630.236 1.969.787.551.335.630.236.236.551 115.0 10.0 90.0 45.0 17.0 10.5 12.0 9.0 20.0 SA8 M6 x 1.0 x 1.25 x 1.25 M12 x 1.75 M12 x 1.75 KIT NO. STEEL AS-PAS2-1 AS-PAS3-1 AS-PAS4-1 AS-PAS5-1 AS-PAS6-1 COPPER ASC-PAS2-1 ASC-PAS3-1 ASC-PAS4-1 ASC-PAS5-1 ASC-PAS6-1 WEIGHT STEEL COPPER A2 10 PAx2x PAx3x PAx4x PAx5x PAx6x kg lb kg lb kg lb kg lb.090.34.153.43.193.85.387.91.100.37.170.47.215.95.430 1.01 lb.20.22 SA8 THREAD THRU 5 A5 D1 D2 R1 H3 H1 H2 kg.414.460 TA STEEL SPINDLE Steel spindles are plated steel with two hex nuts included. TA5 (ACROSS NUT FLATS) TA1 THREAD DIM TA1 TA2 TA3 TA4 TA5 TA6 KIT NO. PAx2x PAx3x & PAx4x PAx5x & PAx6x in in in M6 x 1.0 x 1.25 M12 x 1.75 2.362 60.0 2.953 75.0 3.937 100.0.157 4.0.236 6.0.315 8.0.433 11.0.591 15.0.866 22.0.394 10.0.472 12.0.748 19.0.197 5.0.217 5.5.394 10.0 71200-02 71200-03 71200-05 TA2 TA3 TA6 TA4 HEX TN NEOPRENE TIPPED SPINDLE TN6 (ACROSS NUT FLATS) Neoprene tipped spindles are plated threaded steel with 65 Durometer Neoprene molded onto the end. Two hex nuts are included. TN1 THREAD DIM TN1 TN2 TN3 TN4 TN5 TN6 TN7 KIT NO. PAx2x PAx3x & PAx4x PAx5x & PAx6x in in in M6 x 1.0 x 1.25 M12 x 1.75 2.008 51.0 2.480 63.0 3.937 100.0.551 14.0.728 18.5 1.339 34.0.630 16.0.748 19.0 1.260 32.0.394 10.0.492 12.5.866 22.0.394 10.0.512 13.0.748 19.0.197 5.0.256 6.5.394 10.0 71100-02 71100-03 71100-05 TN2 TN3 TN5 TN4 TN7 6 All dimensions are reference only unless specifically toleranced.

OPTIONS & KITS: SERIES PA CLAMPS SW1 REED ES PROVIDED SW2 SW3 HALL EFFECT ES (PNP) PROVIDED HALL EFFECT ES (NPN) PROVIDED SW4 SW5 MAGNETORESISTIVE ES (PNP) PROVIDED WITH QUICK CONNECT MAGNETORESISTIVE ES (NPN) PROVIDED WITH QUICK CONNECT.276 [7.0].984 [] LED M2.5 MOUNTING SCREW TORQUE TO 1.5 in-lb MAX.157 [4.0] 39.370 [1.0 m] CABLE LENGTH 1.236 [31.4] LED M2.5 MOUNTING SCREW TORQUE TO 1.5 in-lb MAX.157 [4.0] 39.370 [1.0 m ] CABLE LENGTH 1.004 [25.5].157 [4.0].181 [4.6] x 1.25 THREAD 1.004 [25.5].157 [4.0].181 [4.6] SPECIFICATIONS ACTUATED BY POWER CAPACITY OUTPUT STATE OPERATING PRINCIPLE OUTPUT TYPE OPERATING VOLTAGE CURRENT RATING (RES.) BURDEN CURRENT VOLTAGE DROP CIRCUIT PROTECTION LED COLOR OPERATING TEMP. ENVIRONMENTAL CABLE TYPE (SW1) 71115-01-01 Moving Magnet 6 Watt Max. Normally Open Magnetic Reed SPST Contact Closure 5-120 VAC/VDC 50 ma Max. 2.5 V Max. None Red -10 to +70 C IP67 PVC (SW2) (SW3) 71125-01-01 71125-02-01 Moving Magnet 6 Watt Max. Normally Open Magnetic Hall Effect Solid State PNP Solid State NPN 5-28 VDC 200 ma Max. 20 ma Max. @ 24 VDC (Switch Active) 0.5 V @ 200 ma Max. Power Source Reverse, Surge Suppression Green Red -10 to +70 C IP67 PVC (SW4) (SW5) 71125-04-01 71125-03-01 Moving Magnet 1.5 Watt Normally Open Magnetoresistive PNP Current Sourcing NPN Current Sinking 5-30 VDC 50 ma Max. 15 ma @ 24 VDC Max. 12 ma @ 24 VDC Max. 1.5 V @ 25 ma Max. 0.5 V @ 25 ma Max. Reverse Polarity, Surge Supression Green -10 to +70 C IP67 PVC Red 71115-xx-xx DC PNP (SOURCING) DC NPN (SINKING) +DC -DC AC +DC -DC LINE NEUTRAL OPTION SW1 SW2 SW3 SW4 SW5 KIT NO. 71115-01-01 71125-01-01 71125-02-01 71125-04-01 71125-03-01 DESCRIPTION NPN (Sink) or PNP (Source), 5-120 VAC/VDC 1 meter cable PNP (Source), 5-28 VDC, 1 meter cable NPN (Sink), 5-28 VDC, 1 meter cable PNP (Source), Magnetoresistive Switch with Quick Connect NPN (Sink), Magnetoresistive Switch with Quick Connect DC NPN (SINKING) BLACK 71125-xx-xx DC PNP (SOURCING) +DC -DC BLACK +DC -DC 63549-xx CORDSET WITH FEMALE QUICK CONNECT PIN 2/4 WIRE COLOR BLACK PIN 1 WIRE COLOR A MODEL NO. 63549-02 63549-05 DIM. A 78.74 [2 m] 196.85 [5 m].402 [10.2] PIN 3 WIRE COLOR.689 [19.3] 1.299 [34.8] CABLE x.177 [4.5] NOTE: 1) ALL NUMBERS IN [ ] ARE METRIC AND ARE IN All dimensions are reference only unless specifically toleranced. 7

OPTION: SERIES PA CLAMPS LBB PORT FITTINGS Port fitting is not available on size 2. DIMENSION PF1 (MIN) PF1 (MAX) PF2 PF3 PORT FITTING OPTION in.629 12.0.748 16.0.885 20.0.472 12.0 To order fittings separately: Part No. 71120-001 - Imperial Part No. 71121-001 - Metric FITTINGS MAY SWIVEL 360 FROM LOCATION SHOWN PF3 HEX PF1 PF2 SELF SEALING SWIVEL MALE ELBOW FOR 1/4" [6 ] TUBING CLAMP PORT RELEASE PORT EXPLODED VIEW & PARTS LIST: SERIES PA CLAMPS 4 2 1 5 PART NUMBER KEY DESCRIPTION PAS2x PAS3x PAS4x PAS5x PAS6x 1 Body Assembly Imperial 71087-02 71087-03 71087-04 71087-05 71087-06 Metric 71088-02 71088-03 71088-04 71088-05 71088-06 2 Piston & Rod Assembly 71091-02 71091-03 71091-04 71091-05 71091-06 3 Spline & Plug Assembly 90 Right 71092-02-R 71092-03-R 71092-04-R 71092-05-R 71092-06-R 90 Left 71092-02-L 71092-03-L 71092-04-L 71092-05-L 71092-06-L 4 Arm Kits Single Steel AS-PAS2-1 AS-PAS3-1 AS-PAS4-1 AS-PAS5-1 AS-PAS6-1 Single Copper ASC-PAS2-1 ASC-PAS3-1 ASC-PAS4-1 ASC-PAS5-1 ASC-PAS6-1 5 Spindle Kits Standard Adjustable 71200-02 71200-03 71200-03 71200-05 71200-05 Neoprene Tipped 71100-02 71100-03 71100-03 71100-05 71100-05 Seal Kit 71105-02 71105-03 71105-04 71105-05 71105-06 Mounting Kit End 71110-02 71110-03 71110-04 71110-05 71110-06 Side 71111-02 71111-03 71111-04 71111-05 71111-06 Switch Kit Reed 71115-01-01 71115-01-01 71115-01-01 71115-01-01 71115-01-01 Hall Effect PNP (Source) 71125-01-01 71125-01-01 71125-01-01 71125-01-01 71125-01-01 Hall Effect NPN (Sink) 71125-02-01 71125-02-01 71125-02-01 71125-02-01 71125-02-01 Magnetoresistive PNP (Source) 71125-04-01 71125-04-01 71125-04-01 71125-04-01 71125-04-01 Magnetoresistive NPN (Sink) 71125-03-01 71125-03-01 71125-03-01 71125-03-01 71125-03-01 3 APPLICATION CONCERNS Do not attach heavy arms or weights to the clamp without reducing rotation speed. Do not machine the arm while it is still attached to the clamp. The forces generated may damage the internal components. Eliminate impact to the arm as it may damage the internal components. Do not stop clamp arm during its rotary stroke (dim. S2). The arm may only be stopped during its clamp stroke (dim. S3). BMC Hold the arm (not the clamp body) when loosening or tightening the arm mounting screw. 8 5/16 9835