Hydraulic breakers Valid from serial number 50 www.cp.com
Contents Contents General information............................................................... 5.................................................................... 6 Hydraulic breaker................................................................. 6 Percussion unit part : cover........................................................ 8 Percussion unit part : main body complete......................................... 0 Tightening torques............................................................... Working tools.................................................................... 3 Accessories....................................................................... 4 Hydraulic hoses.................................................................. 4 Optional equipment............................................................. 4 Kits............................................................................... 5 Seal kit.......................................................................... 5 Label kit......................................................................... 5 Dimensions...................................................................... 6 3
4
General information This spare parts list applies to the following: Part number 3363 05 0 Hydraulic breaker Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability. Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. Instructions for use This spare parts list contains no safety regulations and is merely intended to assist in the ordering of spare parts. For information about operating, servicing, or repairing, the relevant Safety and operating instructions must be consulted at all costs. Please observe the safety instructions listed in the relevant Safety and operating instructions! 5
Hydraulic breaker 3 0 3 4 4 8 6 99 3 40 33 34 39 37 37 35 5 4 38 95 3 37 36 3 6
No. Remark Quantity Part number 3 4 5 6 8 0(-4) 3 4 3 3 33 34 35 36 37 38 39 40 95 99 Percussion unit Elastic pad Shock absorber Guide plate Guide plate Guide ring Cap Transport safety device complete Transport safety device Allen screw Label transport safety device Nut Plate Cover Pair of lock washers Allen screw Plate Plug Plug Plug Plug Sleeve Lifting eye Breaker box see separate chapter with 3 times no. 40 with 4 times no. 40 professional welding process necessary with no. 95 7 7 6 7 3363 094 4 3363 05 4 3363 046 89 3363 046 9 3363 046 93 3363 046 95 3363 059 95 3363 0834 6-3360 068 83 3363 098 7 3360 03 54 3363 4 0 3363 05 39 336 8505 96 3360 037 50 3363 4 03 3363 0860 336 678 97 336 678 93 3363 059 87 3363 7 3363 9 94 3363 03 94 7
Percussion unit part : cover 9 9 93 08 X 05 9 07 06 0 93 6 04 60 09 0 00 83 8 8 80 8 8 83 0 6 63 60 09 0 04 00 0 03 03 04 90 9 9 9 9 9 0 0 9 X 8
No. Remark Quantity Part number 00 0 04 05 06 07 08 09 0 0 60 6 6 63 80(8-83) 8 8 83 9(9-93) 9 93 00 03 04 90(9-9) 9 9 Cover O-ring Main control valve Cover Cap O-ring Allen screw Fitting Cap Pair of lock washers Plate spring Disk O-ring Threaded insert Screw plug Screw plug Filling valve complete Filling valve Threaded plug O-ring Bolt complete Bolt Washer Seal bush Seal Seal Seal kit Seal Back-up ring with no. 6-63 with no. 60 observe mounting direction 6 6 6 8 3363 00 7 336 039 5 3363 094 59 3363 094 65 3363 0 5 3363 0987 0 3363 0837 5 3360 9956 65 336 3534 88 336 3337 03 3363 00 6 3363 094 7 3360 345 5 336 039 5 3363 0669 63 3360 4784 39 3363 087 86-3360 4784 6 3360 75 5 3363 00 84 3363 094 43 3363 094 63 3363 094 6 3363 0987 00 3363 00 7 3363 03 5 - - 9
Percussion unit part : main body complete 04 04 350 04 04 04 0 04 30 39 39 390 39 39 04 39 39 305 0 305 307 308 04 04 370 306 300 384 04 38 387 388 3 385 386 383 383 30 3 3 309 0
No. Remark Quantity Part number 0 04 300 30 305 306 307 308 309 30 3 3 350 370 38 383 384 385 386 387 388 390(39-39) 39 39 O-ring Seal Main body Cylinder bush Wiper Seal Seal Seal Retainer bar Bolt Protective cap O-ring Percussion piston Lock pin Impact ring Wear bush Threaded insert Bolt O-ring Non-return valve Grease nipple Seal kit Seal Back-up ring with no. 38-388 5 8 8 336 039 5 3363 00 7 3363 00 8 3363 4 47 3363 0987 05 3363 00 9 336 675 8 336 675 83 3363 094 75 3363 094 57 3360 9953 39 3363 00 76 3363 00 0 3360 067 84 3363 094 67 3363 094 69 3363 0835 74 3363 094 57 3363 00 76 3363 094 35 3360 4337 74 3363 03 53 - -
Tightening torques No. Tightening torque Remark 34 08 09 8 8 9 387 Allen screw Allen screw Fitting Filling valve Threaded plug Bolt Non-return valve 85 Nm 00 Nm 330 Nm 30 Nm 0 Nm 00 Nm Allen key size 0 Allen key size 4 Open-end wrench size 46 Socket spanner size Allen key size 5 Torque wrench or Power wrench size 4. Pretighten the bolts to 00 Nm, proceeding in a crosswise fashion,. again pretighten the bolts to 00 Nm, proceeding in a crosswise fashion, 3. then tighten each bolt through 60 ( sides of hexagonal head) in a crosswise fashion, 4. finally tighten each bolt again through 90 ( ½ sides of hexagonal head) in a crosswise fashion. Socket wrench size 7
Working tools 3 35 (5.3) L W L T Metric No. Remark W (mm) L (mm) L T (mm) Wt (kg) Part number 3 Moil point Chisel (cross) Blunt tool 35 565 565 565 050 050 050 0.5 07.8 5. 4 055 7 4 055 8 4 055 5 Imperial No. Remark W (in.) L (in.) L T (in.) Wt (lb) Part number 3 Moil point Chisel (cross) Blunt tool 5.3.44.44.44 4.34 4.34 4.34 3.8 37.7 53.8 4 055 7 4 055 8 4 055 5 3
Accessories Hydraulic hoses Remark Quantity Part number Hose Hose I.D. 5 ("), both ends M 4x conical seal 4, length 300 mm (9 in.) I.D. 5 ("), both ends M 4x conical seal 4, length 800 mm (0 in.) 3360 993 40 336 8538 59 Optional equipment Chisel paste cartridge for grease gun and CP-Lube Grease gun for cartridge Service box with nitrogen cylinder Service box without nitrogen cylinder Test gauge lower wear bush Inside callipers upper wear bush Adapter plate matching the carrier Consult the Chicago Pneumatic Customer Center/Dealer in your area. Base plate with through borings Bolt kit Allen key CP-Lube kit Dust wiper HD kit Remark 30 x 500 g (. lbs) l 0.43 gal (0.53 US gal) 9 mm for bolt kit reinforcement for breaker box Quantity Part number 3363 0949 0 3363 0345 67 3363 490 04 3363 0949 40 336 85 69 3363 0949 5-3363 006 97 3363 0945 75 3360 09 53 3363 4 90 3363 05 5 3363 5 64 4
Kits Seal kit No. Remark Quantity Part number Seal kit 3363 00 85 Label kit No. Remark Quantity Part number Label kit 3363 00 87 5
Dimensions mm (inch) 495 495 (9.49) 47 (.85) 630 (4.80) 45 30 5 35 45 550 630 5 40 700 (66.93) Ø 33 (9.49) (6.73) (.38) (.) (4.53) 40 (.58) (6.73) (.65) (4.9) (.58) (4.80) 95 (.6) 565 (.4) 45 (6.73) Ø (.30) Ø 35 (5.3) 6
7
8
9
0--3 No. Copyright Atlas Copco Construction Tools GmbH ESSEN GERMANY