Catalog No. C Super Compact Nitrogen Gas Springs. SC Series
|
|
- Samson Hood
- 5 years ago
- Views:
Transcription
1 atalog No uper ompact Nitrogen Gas prings eries
2 uper ompact Nitrogen Gas prings Introduction DADO produces top quality products at competitive prices and provides a superior level of customer service. Founded in 1958, DADO is the highest volume producer of gas springs for press tools. DADO s products are widely approved and used in global operations for many industries including metal stamping, automotive and plastic injection molding. uper ompact - eries DADO s uper ompact eries is ideal for applications that require high force and short stroke lengths including absorbing break through and fl anging. With stroke lengths ranging from 6 mm to 50 mm, and outer diameters ranging from 25 mm to 150 mm, DADO continues to provide more force in less space by providing up to tons (18400 dan) of force on contact. eal AD Templates On-line DADO s entire product line is available on-line in solid models and 2D AD formats. For more information, visit our website, or contact DADO. Installation Example DADO Nitrogen Gas prings can be installed with the piston rod in any position. However, DADO springs should be installed in a press or die that avoids lateral pressure, as any substantial lateral or oblique force will shorten the spring s service life. To maximize gas spring life, there should be a stroke reserve of at least 10% of the length of the stroke when the gas spring is installed in the press tool. Avoid contact with draw compound or other contaminants and provide adequate draining in the gas spring pockets. The eries bore-seal construction results in high force while maintaining a compact profile. inked apabilities The uper ompact eries can be operated in both self-contained or linked systems. uper ompact models have side-port linked capabilities through the addition of a sub plate to the base of the cylinder. DADO will install sub plates for systems requiring linked capabilities through the side-port. DADO offers a full range of nitrogen gas spring accessories including hose, fi ttings, control panels, and surge tanks. For more information, contact DADO. Rapid Delivery DADO s modern,600 m 2 main production facility as well as satellite facilities permit the fastest deliveries in the industry. Products are available both directly and through a network of trained distributors providing worldwide support. eries Gas prings should be installed in a manner that avoids lateral forces. Proper alignment and guidance in the tool is imperative for optimal performance. A safety warning plate, indicating that a gas spring is installed in the tool, should be placed in a clearly visible position either on a press tool or in its vicinity. ontact your DADO customer service representative to order or request bulletin B030A DADO.UA fax
3 kn uper ompact Nitrogen Gas prings ø12 Part No x R1.5.5 ø25 M6 Thread RFT x M6 H On-ontact Force lb dan 400 IMUM REOMMENDED TRAVE 90% Narrow Flange FT.004 ø ø38 BOT 4 x M6 H RFB.004 FB.004 ylinder Only: TO.150 ylinder w/mount: rft DADO.UA fax
4 uper ompact Nitrogen Gas prings kn ø M6.5 2 x R ø32 New! Part No On-ontact Force x M6 6 Deep M6 Port lb dan 710 REOMMENDED TRAVE 90% 250-RF (with cylinder) B quare Flange (with cylinder) B25 4 x M6 H ø ø50 BOT x M6 H 9 9 ylinder Only: TO.150 ylinder w/mount: b DADO.UA fax
5 kn uper ompact Nitrogen Gas prings 2 x R ø M ø38 2 x M6 6 Deep M6 Port Part No On-ontact Force lb dan 1025 REOMMENDED TRAVE 90% RFT.010 quare Flange FT.010 ub Plate P (with cylinder) x M6 H ø ø56 BOT x M6 H G 1/ RFB FB.010 ø x M6 12 Deep 17.7 ylinder Only: TO.150 ylinder w/ub Plate: TO.150 ylinder w/mount: rft.150 ub Plate Only: P DADO.UA fax
6 uper ompact Nitrogen Gas prings kn 2 x R ø30 M6 26 ø50 2 x M6 7 Deep G1/8 Port Part No On-ontact Force lb dan REOMMENDED TRAVE 90% ø RFT.018 H ø80 BOT quare Flange FT.018 H ub Plate ø43 P (with cylinder) G 1/ x M6 12 Deep plit Flange Plate B RFB.018 FB H ylinder Only: TO.150 ylinder w/mount: rft ylinder w/ub Plate: TO.150 ylinder w/ub Plate and Mount: B.150 ub Plate Only: P DADO.UA fax
7 kn uper ompact Nitrogen Gas prings ø45 M x R2 18 ø63 34 New! Part No On-ontact Force x M8 9 Deep G1/8 Port lb dan 35 REOMMENDED TRAVE 90% (with cylinder) B quare Flange (with cylinder) B25 ub Plate G 1/8 P (with cylinder) ø H ø85 BOT H 27 ø56 24 plit Flange Plate 8 7 ø34 BOT 12 Deep (with cylinder) B H ylinder w/ub Plate: TO.150 ylinder Only: TO.150 ylinder w/ub Plate and Mount: B2.150 ylinder w/mount: b.150 ub Plate Only: P DADO.UA fax
8 uper ompact Nitrogen Gas prings kn 2 x R ø50 18 ø75 ø M RFT.047 H ø104 BOT 26 RFB Deep ø40 BOT G1/8 Port quare Flange Part No On-ontact Force lb dan REOMMENDED TRAVE 90% FT.047 H 26 FB.047 ub Plate plit Flange Plate ø G 1/ ø40 BOT 12 Deep P (with cylinder) B H ylinder Only: TO.150 ylinder w/mount: rft ylinder w/ub Plate: TO.150 ylinder w/ub Plate and Mount: B.150 ub Plate Only: P DADO.UA fax
9 kn uper ompact Nitrogen Gas prings 2 x R2.5 ø63 ø95 ø M RFT x M12 H ø130 BOT 30 RFB Deep ø52 BOT G1/8 Port quare Flange Part No On-ontact Force lb dan REOMMENDED TRAVE 90% FT x M12 H 30 FB.075 ub Plate plit Flange Plate 1 12 ø P (with cylinder) G 1/ ø52 BOT 12 Deep 92 4 x M12 H B.075 ylinder Only: TO.150 ylinder w/mount: rft.150 ylinder w/ub Plate: TO.150 ylinder w/ub Plate and Mount: B.150 ub Plate Only: P DADO.UA fax
10 uper ompact Nitrogen Gas prings kn x R2.5 ø ø ø M8 RFT.8 4 x M12 H ø155 BOT 33 RFB.8 10 Deep ø68 BOT G1/8 Port quare Flange Part No On-ontact Force lb dan REOMMENDED TRAVE 90% FT.8 4 x M12 H 33 FB.8 ub Plate plit Flange Plate ø G 1/ ø68 BOT H B x M12 H P.800 (with cylinder).800 ylinder Only: TO.150 ylinder w/mount: rft ylinder w/ub Plate: TO.150 ylinder w/ub Plate and Mount: B.150 ub Plate Only: P DADO.UA fax
11 kn uper ompact Nitrogen Gas prings x R2.5 M8 ø100 Part No ø ø RFT x M H ø195 BOT 38 RFB Deep ø90 BOT G1/8 Port quare Flange On-ontact Force lb dan REOMMENDED TRAVE 90% FT x M H 38 FB.183 ub Plate plit Flange Plate ø P (with cylinder) G 1/ ø90 BOT 12 Deep B x M H ylinder Only: TO.150 ylinder w/mount: rft.150 ylinder w/ub Plate: TO.150 ylinder w/ub Plate and Mount: B.150 ub Plate Only: P DADO.UA fax
12 Printed in UA AUTION DO NOT attempt maintenance on spring until internal pressure is exhausted. Installation Requirements 100% F.1 Drain Hole F.3 90% * 0.9 F.5 F.7 F.9 Technical Data harging Medium: Maximum harging Pressure: Operating Temperature: Maximum peed: Operating pecifications Avoid ide oading The striking surface should encompass the full diameter of the rod (F.1). A misaligned press or die will lead to side loading. This condition increases wear on the bearing, seal and cylinder wall. Any damage to the cylinder wall renders the product irreparable (F.1). Therefore, avoid side loading when possible (F.2). Protect From Fluids Direct contact with certain die lubricants and cleaners should be avoided (F.4). Protect gas springs by providing adequate drainage in gas spring pockets (F.3). Rod End Thread The end of the piston rod has a construction thread intended for assembly and disassembly purposes only, and should never be used to mount or secure the gas spring (F.2). DADO s.004 does not have a rod end thread and should be sent to DADO for repair. Provide troke Reserve DADO uper ompact Gas prings will permit travel of the full nominal stroke; however, at least a 10% stroke reserve is recommended to achieve optimal performance (F.5 and F.6). Discharging elf-ontained Gas pring The DADO Pressure Analyzer ( ) allows for charging, discharging and gauging of the pressure in the eries Gas prings (F.7). For information on completely exhausting the gas spring contact DADO. Recharging elf-ontained Gas pring Hold the spring vertically at all times during fi lling. Never compress the gas spring in a vice or clamp outside of the die or application as damage to the gas spring can result (F.8). Prior to recharging, assure that (1) the rear head is seated against the c-ring and (2) the rod is fully extended (F.9). Never charge the gas spring with the rod down or the rear head not seated against the c-ring (F.10). To seat the rear head, thread two bolts into the tapped holes in the rear head and depress the valve stem while pulling the rear head back against the c-ring. Thread the T-handle ( or ) into the rod end and depress the valve stem with the Valve Bleed Tool ( ) or Port ervicing Tool (90.3.8). Pull the piston rod up until it is fi rmly seated. Remove the T-handle from the rod and charge the gas spring to the desired pressure. Repair For information on the repair of DADO s uper ompact eries contact DADO. Nitrogen Gas bar (2 75 psi) ( F 0 F).5 m/sec ( in/sec) Plymouth Oaks Blvd. Plymouth, Michigan DADO.UA fax The global leader in nitrogen gas spring technology DADO, Inc. 09 All Rights Reserved >0.2 F.2 F.4 > * 0.9 F.6 F.8 F.10
Catalog No. C09101B. SC Series. Super Compact Nitrogen Gas Springs PED 2014/68/EU COMPLIANT
atalog No. 09101B uper ompact Nitrogen Gas prings eries PED 2014/68/EU OMPIANT uper ompact Nitrogen Gas prings Introduction DADO produces top quality products at competitive prices and provides a superior
More informationPED 2014/68/EU COMPLIANT. Full and Compact Height Nitrogen Gas Springs Series Full Height / Matches ISO Standards
atalog No. 17102 Full and ompact Height 90.10 / 90.8 eries 90.10 eries Full Height / Matches IO tandards 90.8 eries ompact Height Alternative PED 14/68/EU OMPIANT Introduction The global leader in nitrogen
More informationCompact Nitrogen Gas Springs / 90.60N Series
Catalog No. C09112 Compact 90.60 / 90.60N eries 90.60 / 90.60N eries 90.60N.00500 0.5 ton / 5 kn ø 16.5 2 x R1 C L ø44.5 G 1/8 Port 2 x 12.5 Deep Force Graph FORCE (dan) 665 625 580 535 490 445 Based on
More informationPED 97/23/EC COMPLIANT. Full and Compact Height Nitrogen Gas Springs Series Full Height / Matches ISO Standards
atalog No. 10108A Full and ompact Height 90.10 / 90.8 eries 90.10 eries Full Height / Matches IO tandards 90.8 eries ompact Height Alternative PED 97/23/E OMPIANT 2 Introduction The global leader in nitrogen
More informationCatalog No. C12119B. Nitrogen Gas Spring Lifters. Lifters for Single-Point, Multi-Point and Rail Lift Applications
atalog No. 12119B Nitrogen Gas pring Lifters L eries Lifters for ingle-point, Multi-Point and Rail Lift Applications Nitrogen Gas Lifters Introduction High Quality onstruction The global leader in nitrogen
More informationCatalog No. C12118E PED 2014/68/EU COMPLIANT. Ideal for Coil Spring Replacement
atalog No. 12118E Micro Micro Series PED 2014/68/EU OMPIANT Ideal for oil Spring Replacement Micro Series Introduction DADO produces top quality products at competitive prices and provides a superior level
More informationCatalog No. C Gestamp Specific Selected Products PED 2014/68/EU COMPLIANT
atalog No. 15114 PED 2014/68/EU OMPIANT Introduction The global leader in nitrogen gas spring technology DADO produces top quality products at competitive prices and provides a superior level of customer
More informationCatalog No. C11107A. Extreme Condition Solutions PED 97/23/EC COMPLIANT
Catalog No. C11107A PED 97/23/EC COMPLIANT Nitrogen Gas Spring Introduction The global leader in nitrogen gas spring technology DADCO produces top quality products at competitive prices and provides a
More informationSuper Compact CU4 420 CU
Product eries Gas prings including tandard Mounts uper ompact U4 420 U4 18300 Edition 1.2012 opyright KALLER Would you like to order this product? All available information at. FEATURE AND BENEFIT UPER
More informationT2 Mini Series. Mini Nitrogen Gas Springs. One-half inch diameter T2-50. Three-quarter inch diameter T2-90. One-inch diameter T2-180
T2 Mini eries Mini Nitrogen Gas prings One-half inch diameter T2-50 Three-quarter inch diameter T2-90 One-inch diameter T2-180 tripper springs with special model conforming to GM Global tandard Table of
More informationCJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting
1 Air Cylinder Double Acting: ø/ingle Acting, pring Return: ø., ø eries Variations tandard eries Double acting ingle acting style B pring return B U mm For single acting type, refer to pages 6-- to.. How
More informationTanker 400 XP Series NITROGEN GAS SPRINGS IDEAL NITROGEN GAS SPRINGS FOR HIGH PERFORMANCE (TNK 400) AND HIGH SPEED (TNK 400HS)
Tanker 400 XP Series NITROGEN GAS SPRINGS IDEAL NITROGEN GAS SPRINGS FOR HIGH PERFORMANCE (TNK 400) AND HIGH SPEED (TNK 400HS) Tanker 400 XP Series Nitrogen Gas Springs IDEAL NITROGEN GAS SPRINGS FOR HIGH
More informationDouble Acting & Spring Return. SERIES 92/93 Rack & Pinion PNEUMATIC ACTUATOR. The High Performance Company
PNEUMATIC ACTUATOR SERIES 92/93 Rack & Pinion Double Acting & Spring Return The High Performance Company SERIES 92/93 Styling, strength, compactness, and simplicity of design have been combined to produce
More informationTanker 400 XP Series NITROGEN GAS SPRINGS IDEAL NITROGEN GAS SPRINGS FOR HIGH PERFORMANCE (TNK 400) AND HIGH SPEED (TNK 400HS)
Tanker 400 XP Series NITROGEN GAS SPRINGS IDEAL NITROGEN GAS SPRINGS FOR HIGH PERFORMANCE (TNK 400) AND HIGH SPEED (TNK 400HS) Tanker 400 XP Series Heavy Duty Gas Springs GENUINELY HYSON Since 1964, HYSON
More informationT5 Series. Ultra High-Force, Compact-Design Nitrogen Gas Springs. Ultra High-Force, Compact-Design Nitrogen Gas Springs.
T5 Series T5-500 to T5-1900 Ultra High-Force, Compact-Design Nitrogen Gas Springs Ultra High-Force, Compact-Design Nitrogen Gas Springs APPROVED 97/23/EC T5 Series Ultra-High Force, Compact-Design Nitrogen
More informationSERIES HYDRAULIC MOTORS
ERIE HYDRULIC MOTOR overview The eries motor is the leader in its class, offering high efficiency and durability. The three-zone orbiting valve, laminated manifold and Roller tator motor work harmoniously
More informationCombination Clutch/Brake
ombination lutch/brake For metalforming equipment Fast, smooth cycling ool running with higher torque ompact disc design Simple Installation Multiple mounting options for compatability with other competitive
More informationTechnical Specifications
All-Electric 55 Frame 21/24/29/34 oz Injection Unit Specifications A B C A B C Injection Capacity, Max GPPS* oz 21 29 34 gm 595 822 963 Theoretical Disp in^3 37.7 52.6 61.1 cm^3 618 862 1,001 Max Pressure
More informationBray/ VAAS Slurry Series Knife Gate Valve 760/762/765/766/767/768 Series Operation and Maintenance Manual
Bray/ VAAS Knife Gate Valve 760/762/765/766/767/768 Series Table of Contents Definition of Terms 1 Safety Instructions 1 Introduction 2 Unpacking 2 Storage 2 Installation 3 Commissioning 3 Cylinder-Operated
More informationAir Cylinder. Single rod 2.5. Single rod Spring return. How to Order/Double Acting. Applicable tubing. Symbol Tube material Polyurethane Soft nylon
Air Cylinder Double Acting: ø/ingle Acting pring Return: ø2., ø Variations eries tandard B Basic mm Double acting ingle acting ingle rod ingle rod pring return 2. tandard stroke,, 1,,,, 1, How to Order/Double
More informationInlet and Exhaust Valve Springs - Remove and Install
Page 1 of 6 'LVDVVHPEO\DQG$VVHPEO\ &&DQG&2QKLJKZD\(QJLQHV 0HGLD1XPEHU5(15 3XEOLFDWLRQ'DWH 'DWH8SGDWHG Inlet and Exhaust Valve Springs - Remove and Install SMCS - 1108-010 Removal Procedure Table 1 Required
More informationø19 to 38mm ø19 to 150mm ø25 to 150mm ø25 to 120mm ø38 to 165mm
TBLE OF CONTENT USEFUL INFORMTIONS MICRO GS SPRINGS HIGH POWER GS SPRINGS SUPER COMPCT GS SPRINGS LOW PROFILE GS SPRINGS ISO GS SPRINGS CONNECTION OF GS SPRINGS CONNECTION MNIFOLD BLOCKS MNIFOLD DISTRIBUTORS
More informationø19 to 38mm ø19 to 150mm ø25 to 150mm ø25 to 120mm ø38 to 165mm
TBLE OF CONTENT USEFUL INFORMTIONS MICRO GS SPRINGS HIGH POWER GS SPRINGS SUPER COMPCT GS SPRINGS LOW PROFILE GS SPRINGS ISO GS SPRINGS CONNECTION OF GS SPRINGS CONNECTION MNIFOLD BLOCKS MNIFOLD DISTRIBUTORS
More informationDIMENSIONS. Oil Capacity = 14.6 oz Maximum Fluid Temperature = 140 F Inlet Thread = 1/2 F Discharge Thread = 3/8 F
Plunger Pumps XMA 1750 RPM E VERSION 1 1/8 WITH NEMA 182-184 FLANGE FEATURING MANIFOLD: High strength forged brass for long term use. DIMENSIONS BOLTS: Eight 6mm grade 12.9. PLUNGERS: A special thick solid
More informationDesign. Dynamic Sealing Face Ød1,ØD max Static Sealing Face Ød2,ØD2, L1 3.2 max 16 max 125 max 140 max
Design Hallite 506 bearing strip is available in three forms: cut rings, spiral lengths and flat coils. Hallite 506 provides an extremely effective, hard wearing and easy to use bearing material. Manufactured
More informationDESIGN-TITE Nitrogen Gas Springs. They truly are... Better by Design
DESIGN-TITE Nitrogen Gas Springs They truly are... Better by Design DESIGN-TITE - Expanded & Improved We are proud to offer our new and expanded line of nitrogen gas springs. Now the manufacturer of the
More informationFrom the Hyson family of higher force gas springs
rom the Hyson family of higher force gas springs Same force and diameter as T3 Series S-4 (7/16-20) port for use with standard full size hoses ive sizes from 1000 to 9500 Up to 21,400 lbs. contact force
More informationDESIGN-TITE Nitrogen Gas Springs. They truly are... Better by Design
DESIGN-TITE Nitrogen Gas Springs They truly are... Better by Design DESIGN-TITE - Expanded & Improved Index We are proud to offer our new and expanded line of nitrogen gas springs. Now the manufacturer
More informationSD Bendix TP-3DC Tractor Protection Valve with Double Check DESCRIPTION
SD-03-3656 Bendix TP-3DC Tractor Protection Valve with Double Check 3/8"-18 NPT 3/8"-18 NPT DATE CODE STAMPED HERE LABEL WITH TP-3DC O.E. PC. NO. HERE AUXILIARY 1/4" -18 NPT QR-L FACTORY INSTALLED ON SOME
More informationAERIAL & DIE MOUNT WIDE CAMS CATALOG
AERIAL & DIE MOUNT WIDE CAMS CATALOG AERIAL & DIE MOUNT WIDE CAMS SERVICE WE DELIVER AND QUALITY YOU CAN DEPEND ON IEM is a leading manufacturer of die and mold components supplied globally to the parts
More informationRam Cushions and Pressure Parallels Dynamic Solutions For A Global Market
Nitro-Dyne Ram Cushions and Pressure Parallels APPROVED 97/23/EC Dynamic Solutions For A Global Market Nitro-Dyne Ram Cushions and Pressure Parallels Table of Contents Page Introduction...2 The Advantages...3
More informationG max rad Ød 2 Ød 3 ØD to to to to
Design Hallite 506 bearing strip is available in three forms: cut rings, spiral lengths and flat coils. Hallite 506 provides an extremely effective, hard wearing and easy to use bearing material. Manufactured
More informationANSI Centrifugal Process Pumps. 911 Series
ANSI Centrifugal Process Pumps 9 Series WHAT IS AN ANSI PUMP In 977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition
More informationNPL Series LOW HEIGHT GAS SPRINGS PLL I CATIONS WHERE IGHT IS RESTRICTED
NPL Series LOW HEIGHT GAS SPRINGS IDEAL EAL FFOR O R STAMPING APPLICATIONS PLL I CATIONS WHERE HEIGHT IGHT IS RESTRICTED NPL Series 2 1-800-876-4976 440-526-5900 www.hysonproducts.com Hyson Products 2014
More informationXMV 3400 RPM D VERSION 1 WITH GAS ENGINE FLANGE DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XMV 3400 RPM D VERSION 1 WITH GAS ENGINE FLANGE DIMENSIONS BOLTS: Eight 6mm grade 12.9. PLUNGERS: A special thick solid ceramic
More informationACT-132. DC/91000/M, DC/93000/M Single acting Ø mm DC/9 / /
Series 90000 ompact Actuators D/91000/, D/93000/ Single acting Ø 12... 63 mm ne third the basic length of a corresponding IS/VDA model ow friction, long life seal design Fully non-corrodible specification
More informationSD Bendix MV-3 Dash Control Module DESCRIPTION. Bottom View
SD-03-3415 Bendix MV-3 Dash Control Module MOUNTING PLATE MOUNTING HOLES (4) Dual Circuit SUPPLY Check VALVE AUXILIARY PORT (Optional) delivery DESCRIPTION secondary supply Trailer delivery FIGURE 1 -
More informationYour Global Flow Control Partner. Series 92/93 Pneumatic Actuators. Technical Manual
Your Global Flow Control Partner Series 92/93 Technical Manual TM-1056 Pneumatic Actuator - 04/18/2017 Bray Series 92/93 Technical Manual - Table of Contents Topic...Page(s) Actuator Installation Notes...
More informationAPCO ASU COMBINATION AIR VALVE
BULLETIN 300.00-1 JANUARY 2016 APCO ASU COMBINATION AIR VALVE - Design - Operation - Performance www.dezurik.com Innovative Air Valve Technology The APCO ASU Combination Air Valve introduces an innovative
More information.75 Ton to 7.5 Tons Nitrogen Gas Springs ( 7.5 kn to 75 kn ) IS Series. International Standards NAAMS Standards
N-FORCER CER.75 Ton to 7.5 Tons Nitrogen Gas Springs ( 7.5 kn to 75 kn ) IS Series International Standards NAAMS Standards Detachable mounts shown Welded mounts also available Die, Mold & Automation Components,
More informationXTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS BOLTS: Six 6mm grade 12.9. PLUNGERS: A special thick solid ceramic for
More informationOperating Instruction Manual For EP-100WC Compression Tool with Parts List
Operating Instruction Manual For EP-100WC Compression Tool with Parts List EP-100WC SPECIFICATIONS SPECIFICATIONS Output: 100 ton Weight: 96 lbs. Size: 7-1/2 W x 14 H Die Style: HA100 Series Ram Stroke:.98
More informationMobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C
Mobile Cylinder Div. Standard Build Series Catalog HY18-0014/US Rev C WARNING - USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE
More informationPRODUCT OVERVIEW. Our BDB (Bolted Body) and BW3 (Fully Welded Body) trunnion-mounted ball valves are designed and manufactured
PRODUCT OVERVIEW For over 30 years, FluoroSeal has been manufacturing and customizing a wide range of valves, and accessories for many industries including Oil & Gas, Petrochemical, Chemical, Mining, Pharmaceutical,
More informationT3F Series HIGH FORCE GAS SPRINGS WITH G1/8 CHARGING PORT INTRODUCING COMPLETE RANGE OF GAS SPRINGS MEETING FCA GLOBAL DIE ENGINEERING STANDARDS
TF Series HIGH FORCE GAS SPRINGS WITH G1/8 CHARGING PORT INTRODUCING COMPLETE RANGE OF GAS SPRINGS MEETING FCA GLOBAL DIE ENGINEERING STANDARDS GENUINELY HYSON Since 196 HYSON Metal Forming Solutions has
More informationSD Bendix R-12P Pilot Relay Valve DESCRIPTION
SD-03-1063 Bendix R-12P Pilot Relay Valve 1/4 RELAY PISTON RESERVE SPRING LOAD PISTON 1/4 COVER EQUALIZING ORIFICE BODY 1/2 SUPPLY 3/8 DELIVERY 1/2 SUPPLY (2) 3/8 DELIVERY (4) EXHAUST FIGURE 1 - CUTAWAY
More informationWESTATE DIESEL SYSTEMS
Centrifugal Filtration for Lubricants and Fluids Mining - Industrial - Marine - Agriculture - Automotive Model 996 Installation Instructions, Parts List and Service Instructions Three connections are required
More informationDESIGN 2 -TITE Nitrogen Gas Springs
READY THE INNOVATOR OF OUR INDUSTRY SM DESIGN 2 -TITE Nitrogen Gas Springs They truly are... Better by Design DESIGN 2 -TITE - Expanded & Improved We are proud to offer our new and expanded line of nitrogen
More informationOPERATING INSTRUCTIONS & SERVICE MANUAL BLUE MAX II HYDROSTATIC TEST PUMP
PAGE 1 OF 10 OPERATING INSTRUCTIONS & SERVICE MANUAL BLUE MAX II HYDROSTATIC TEST PUMP EFFICIENT, EASY OPERATION Air operated pump Wide range of pressures and volumes Easy to operate controls Output pressure
More informationMachine elements. Pneumatic stamping unit. Toggle-lever presses
Machine elements Pneumatic stamping unit Toggle-lever presses Machine elements ST 1292 ST 1092 Page 7.03 ST 9041 Page 7.04 ST 9061/62 Page 7.05 ST 9067 Page 7.05 ST 9070/72 Page 7.06 ST 9075 Page 7.07
More informationTanker B Series. High Force, High Performance. H&O DIE SUPPLY, INC Dynamic Solutions for a Global Market
High Force, High Performance Tanker B Series Over 25% more force than the Super Tanker Series it replaces Dynamic lubrication extends spring life Bore seal resists contamination and rod damage Self-aligning
More informationSMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
More informationModel T TC TS TSC Initial F (dan) L max (mm) Stroke (mm) Standards
uerza: 15 orce 2 orce 2 Piston Rod ealed gas springs Bore ealed gas springs Ø15 Ø15 Ø Ø G-15- Ø15 Ø15 Ø15 Ø15 Model KP-2 HD-2 Initial () max () troke () 2 2 2xtroke1 2xtroke6 19-125 25- * Model T-1 TC-1
More informationOil-free Portable Compressors
Oil-free Portable Compressors High performance, easy operation, and outstanding control For more than 125 years, Ingersoll Rand has been the world leader in compressor technology. That tradition of leadership
More informationLinear Alignment Coupler. Flange Couplers and Weld Plates. Spherical Rod Accessories. Milwaukee Cylinder provides various cylinder accessories to
ylinder ccessories Page Linear lignment oupler MLOK Rod lamp Flange ouplers and Weld Plates Spherical Rod ccessories 19 150-151 15 15 Milwaukee ylinder provides various cylinder accessories to maximize
More informationSeries 111 Accumulator Product Information
Series 111 Accumulator Product Information l Model 111.11 Model 111.12 011-553-304 B Copyright information Trademark information Contact information Publication information 2000 MTS Systems Corporation.
More informationDieMax XL TM Maximum Life Springs
TRUSTED SOLUTIONS AND INNOVATION DieMax XL TM Maximum Life Springs Meets ISO Standards DieMax XL TM Maximum Life Springs Strategically located to serve you better IEM, a division of Connell Limited Partnership,
More information2011 American Cylinder Co., Inc.
0 2011 American Cylinder Co., Inc. Catalog LPC 1108-E TABLE OF CONTENT Table of Contents... Page 1 How to Order... Page 1 tandard Features and Benefits... Page 2 pring Action Models ingle Acting:pring
More informationHigh Volume, Corrosion Resistant Rotary Unions. HVH Series FLOW PASSAGE OPTIONS
High Volume, Corrosion Resistant Rotary Unions HVH Series FLOW PASSAGE OPTIONS 3 4 6 8 Contents About DSTI 3 What is a Rotary Union? 4 Overview 5 How To Order 7 Specifi cations & Operating Information
More informationTLD 2500 Tube Testing Guns
Phone: (713) 766-1589 Toll Free: (866) 799-2007 Plugging Gun Air Injection Gun Operator s Manual TLD 2500 Tube Testing Guns Quick and safe pressure testing of 7 to 8 tubes per minute! Online: www.usaindustries.com/manual/tld2500
More informationQUICK INDEX. Series SMA Aluminum. Pancake and conventional lengths 1 1/8 thru 3 bore. Series SMS Solid Stainless
QUICK INDEX A U R O R A A I R P R O D U C T S Series SMA Aluminum Pancake and conventional lengths /8 thru 3 bore Series SMS Solid Stainless Pancake and conventional lengths for hostile environments Series
More informationHydraulic cylinders are devices which convert fluids power into mechanical force or motion. This force or motion will be in a straight line.
HYDRAUC CYNDR Hydraulic cylinders are devices which convert fluids power into mechanical force or motion. his force or motion will be in a straight line. C--1-0 Graphic ymbol C eries C- standard hydraulic
More informationStainless Steel Flat-I The Corrosion Resistant, IP69K Rated Solution for Low Profile Applications. We make things MOVE
Stainless Steel Flat-I The Corrosion Resistant, IP69K Rated Solution for Low Profile Applications We make things MOVE Stainless Steel Flat-I Stainless Steel Flat-I Cylinders are designed specifically for
More informationThe MP-Series of Hydraulic Pressure Intensifiers
The MP-Series of Hydraulic Pressure Intensifiers Applications: Hydraulic Workholding on Machine Tools Static and Impulse Testing Equipment Hydraulic Power Packs Stone Chrushing Machines Subsea R.O.V. s
More informationSMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
More informationDualSeal 24 Hose System
DualSeal 24 Hose System THE PREFERRED HOSE SYSTEM IDEAL FOR CONNECTING NITROGEN GAS SPRINGS AND ENSURING A BALANCED LOAD METAL FORMING SOLUTIONS DualSeal 24 System The Preferred Hose System IDEAL FOR CONNECTING
More informationO-Ring Face Seal Hose
Hose TRADITIONAL HIGH VIBRATION HOSE SYSTEM THE STANDARD FOR MANY AUTOMOTIVE APPLICATIONS THE STANDARD FOR MANY AUTOMOTIVE APPLICATIONS Table of Contents Page Introduction... 1 Safety Guidelines... 2 Control
More informationInstallation & Maintenance Manual SPRING ENGAGED FRICTION CLUTCHES THROUGH SHAFT MOUNT - BALL BEARING PILOT REGULAR DUTY
Installation & Maintenance Manual SPRING ENGAGED FRICTION CLUTCHES THROUGH SHAFT MOUNT - BALL BEARING PILOT REGULAR DUTY Catalog Products: E3A2R-STH E4A2R-STH E5A2R-STH E6A2G-STH And non-catalog variations
More informationSD Bendix SR-5 Trailer Spring Brake Valve DESCRIPTION PORTS. 1-1/2" or 3/4" NPT Spring Brake Reservoir Mounting (SPR BK RES)
SD-03-4516 Bendix SR-5 Trailer Spring Brake Valve PRESSURE PROTECTION SR-5 IDENTIFICATION HOLE 1/4 NPT (2) COVER* FIGURE 1 DESCRIPTION 1/4 NPT TRAILER 1/4 NPT SR-5 TRAILER *SHOWN WITH OPTIONAL ANTI-COMPOUNDING
More informationYOUR GLOBAL PARTNER FOR HIGH EFFICIENCY EXTRUDER DRIVES
YOUR GLOBAL PARTNER FOR HIGH EFFICIENCY EXTRUDER DRIVES GEARBOXES AND DRIVE PACKAGES FOR EXTRUSION, COMPOUNDING AND INJECTION MOLDING MACHINES Sponges, PVC pipes, colored granules, profi le of high performance
More informationTop quality components
2 The Winning Force As a total supplier for sheet metal manufacturing with almost 60 years of experience, Durma understands and recognizes the challenges, requirements and expectations of the industry.
More informationT2 ISO Series. Fully meets ISO 11901, NAAMS, Chrysler, Ford and General Motors Die Standards
T2 ISO Series Fully meets ISO 11901, NAAMS, Chrysler, Ford and General Motors Die Standards Secondary piston ring assembled onto rod Guide features built-in pressure relief if assembled upside down Modular
More informationSJV 3400 RPM D VERSION 3/4 WITH GAS ENGINE FLANGE DIMENSIONS
Plunger Pumps FEATURING SJV 3400 RPM D VERSION 3/4 WITH GAS ENGINE FLANGE DIMENSIONS MANIFOLD: High strength forged brass for long term use. BOLTS: Three 8mm grade 8.8. PISTONS: Ceramic coated stainless
More informationUNSCREWING DEVICES FOR MOLDS
The Threadformer UNSCREWING DEVICES FOR MOLDS TGA - BASIC UPRIGHT UNITS The Threadformer Features and Specifications Powerful Hydraulic Motor Precision Core stopping Compact and sturdy design Unscrews
More informationStock Lifters IDEAL FOR IMPROVED PART HANDLING THROUGH GUIDED LIFTING SYSTEMS. Hyson
Stock Lifters IDEAL FOR IMPROVED PART HANDLING THROUGH GUIDED LIFTING SYSTEMS 1 Introduction Stock Lifters GENUINELY HYSON Since 1964, HYSON has been dedicated to providing safer and more reliable products
More informationSPRING LOADED DEVICES
Spring Loaded Devices SPRING LOADED DE VICES Plungers: Plungers, Spring...38 39 Plungers, Spring, Metric... 40 41 Plungers, Shortie Spring... 42 Plungers, Shortie Spring Stainless Steel... 42 Plungers,
More informationT4 Series HEAVY DUTY GAS SPRINGS IDEAL FOR STAMPING ULTRA-HIGH STRENGTH STEELS HYSON 2018
T4 Series HEAVY DUTY GAS SPRINGS IDEAL FOR STAMPING ULTRA-HIGH STRENGTH STEELS 1 Introduction Heavy Duty Gas Springs GENUINELY HYSON Since 1964, HYSON has been dedicated to providing safer and more reliable
More informationThe Winning Force PRESS BRAKES. Perfect Precision Deep And Fast Bending Efficient Winning Elegant Design
The Winning Force AD ERIE PRE BRAKE Perfect Precision Deep And Fast Bending Efficient Winning Elegant Design 2 The Winning Force As a total supplier for sheet metal manufacturing with almost 60 years of
More information1721 Intimidator AGM Bro_ _1641 DUR AGM Brochure 9/8/11 10:57 AM Page 3 AGM BATTERIES
AGM BATTERIES Innovative AGM Solutions for Intimidating Battery Needs Conventional flooded batteries can be extremely intimidated by the power demands of today s vehicles falling short of delivering critical
More informationNitrogen Gas Springs. subject to alterations. f107
Nitrogen Gas Springs 2 8876 8 2 f107 Two-Chamber System 2480. 2 8605 2002 6 F108 Compact-Gas Springs 2490. Single-Chamber System 2 10468 6 1 F109 FIBRO Gas Springs The extensive range of FIBRO Gas Springs
More informationTRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS Quality & performance Quick delivery Precision Components
www.danly.com TRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS Quality & performance Quick delivery Precision Components www.danly.com CATALOG DIE SETS Service We Deliver and Quality You Can Depend On
More informationTECHNICAL DATA. Inlet Type Outlet Type OBSOLETE 6 (DN150)
January 13, 2006 Deluge Valves 211 a 1. PRODUCT NAME Viking Model E-1 Deluge Valve 3 (DN80) Available since 1985 4 (DN100) Available since 1985 6 (DN150) Available since 1984 2. MANUFACTURER THE VIKING
More informationT3T Series. From the Hyson family of higher force gas springs. Dynamic Solutions for a Global Market. Same force and diameter as T3 Series
T3T Series rom the Hyson family of higher force gas springs Same force and diameter as T3 Series S-4 (7/16-20) port for use with standard full size hoses Uses T2 flange mounts ive sizes from 1000 to 9500
More informationDYNE-A-CAM SERIES IDEAL FOR PIERCING, FLANGING, CUTTING AND FORMING OPERATIONS
Cam Units DYNE-A-CAM SERIES IDEAL FOR PIERCING, FLANGING, CUTTING AND FORMING OPERATIONS CAM Units v9.indd 1 6/18/2015 4:59:50 PM Introduction Dyne-A-Cam Series IDEAL FOR PIERCING, FLANGING, CUTTING AND
More informationCompact Hydraulic Cylinder. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order Z73. Bore size. 20mm 25mm 32mm 40mm 50mm 63mm 80mm 100mm
ompact ydraulic ylinder MPa Series KG ø, ø, ø, ø, ø, ø, ø, ø0 With uto Switch With auto switch (built-in magnet) KG DKG Mounting: asic type 0 ore size ow to Order mm mm mm mm mm mm mm 0mm Z3 Refer to "uto
More informationTools, Equipment and Supplies Needed:
153-162 DISC BRAKE/DUAL MASTER CYLINDER CONVERSION Please take the time to read the enclosed instructions carefully. If you have any questions, call our Product Assistance personnel for clarifi cation.
More informationAxial piston variable pump A4VG Series 40
Axial piston variable pump A4VG eries 40 RE 92004 Edition: 07.2016 Replaces: 06.2012 High-pressure pump for applications in a closed circuit up to 500 bar ize 110...280 Nominal pressure 450 bar Maximum
More informationSD Bendix SV-1 Synchro Valve SV-3 & SV-4 Trailer Release Valve CONTROL CONTROL EXHAUST EXHAUST DELIVERY DELIVERY SUPPLY SUPPLY
SD-03-4020 Bendix SV-1 Synchro Valve SV-3 & SV-4 Trailer Release Valve BENDIX SV-3 BENDIX SV-4 PISTON PISTON PISTON PISTON 1/8" P.T. BODY 1/8" P.T. GUIDE BODY GUIDE CHECK DETAIL OF BENDIX SV-3 DETAIL OF
More informationAxial Piston Fixed Pump A2FO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial Piston Fixed Pump A2FO RE 91401/03.08 1/24 Replaces: 09.07 Technical data sheet eries 6 izes Nominal
More informationOLYMPUS. Gas Turbine Fuel Controls. Building of complete custom designed fuel systems. Single or serial production quantities
OLYMPUS Gas Turbine Fuel Controls Gas Fuel Throttle Valve Liquid Fuel Throttle Valve Liquid Fuel Metering Pump Gas & Liquid Fuel Throttle Assemblies Building of complete custom designed fuel systems Single
More informationMANN+HUMMEL ProVent. Oil separator for closed and open crankcase ventilation
MANN+HUMMEL ProVent Oil separator for closed and open crankcase ventilation ProVent high performance with distinct advantages The development of the whole MANN+HUMMEL ProVent product family was directed
More informationUNIQUE USER FRIENDLY MICROMETER STYLE ADJUSTMENT
The series hose crimper with Micrometer Style Adjustment and 35 tons of crimping force has the capability to crimp hoses up to " 2 wire and 3/4" 4 wire. UNIQUE USER FRIENDLY MICROMETER STYLE ADJUSTMENT
More informationSachs shock manual. ( ) 2 & 4 Stroke RR Enduro. ( ) RS Dual Sport
Sachs shock manual (2013 2015) 2 & 4 Stroke RR Enduro (2014-2015) RS Dual Sport 1 Introduction The procedures in this manual must take place in a clean environment using professional tools and some specific,
More informationXCITE. Reso-not TM Damping System XCITE. Model No ZSP-101-P2-38 Foot Mount Damper with 1 Quart Accumulator System
XCITE Model No. 1206-ZSP-101-P2-38 Foot Mount Damper with 1 Quart Accumulator System Xcite Systems Corporation 675 Cincinnati RDS Batavia - 1 Pike Cincinnati, Ohio 45245 Tel: (239) 980-9093 Fax: (239)
More information제품문의 : SR Tech KALLER GAS SPRING 공식공급업체 About gas springs GENERAL Page 2.1/2 Main groups of gas springs Page 2.
www.srtech.co.kr 제품문의 : SR Tech 05-966-707 KALLER GAS SPRING 공식공급업체 GENERAL Page 2./2 Main groups of gas springs Page 2./2 Overview of Models Page 2./3 LCF (Low Contact Force) Gas Spring Information Page
More informationCOMPACT CYLINDER CYLINDER FORCE AND WEIGHT TABLE BASE WEIGHT EFFECTIVE AREA
CRS COMPACT CYLINDER STROKE TOLERANCE TEMPERATURE LIMITS VELOCITY LIFE EXPECTANCY SERIES CRS 1 psi min to 15 psi max at zero load [.7 bar min to 1 bar max] air.31 inch [.8 mm] -2 to +18 F [-28 to +82 C]
More informationSCHMIDT HydroPneumaticPress
SCHMIDT HydroPneumaticPress C-rame design eatures The C-rame design offers full accessibility when manually inserting and removing parts Easy adaptation to different tool and part heights because of simplistic
More informationJIS SPRINGS SeRvIce We DelIveR and QualIty you can DePeND on DaNly IeM DaNly IeM DaNly IeM DaNly IeM
JIS SPRINGS 1 JIS SPRINGS Service We Deliver and Quality You Can Depend On DANLY IEM is a leading manufacturer of die and mold components supplied globally to the parts forming industry. Backed by years
More informationAdvanced Air Driven Gas Boosters and Amplifiers. Sprague. Air Amplifiers. Gas Boosters
Advanced Air Driven Gas Boosters and Amplifiers Sprague Gas Boosters Air Amplifiers Gas Boosters and Systems Works off compressed air supplies Operates quietly Features mechanical separation between air
More informationAxial piston variable pump A4VG Series 40
Axial piston variable pump A4VG eries 40 RE 92004 Edition: 02.2017 Replaces: 07.2016 High-pressure pump for applications in a closed circuit up to 500 bar ize 110...280 Nominal pressure 450 bar Maximum
More information