STANDARD PROGRAMME Shrink Chucks
|
|
- Susanna McKinney
- 5 years ago
- Views:
Transcription
1 116 STANDARD PRORAMME Shrink Chucks
2 122 STANDARD PRORAMME Shrink Chucks Shrink Chuck ISO , Form AD/AF (prev. DIN AD/B), narrow design, ISO Form AD/AF 2.5 SK/ISO Dimensions sw Weight l 1 l 2 l 3 l M Z M Z M Z M Z M Z M8x Z M10x Z M10x Z M12x Z M12x Z M16x Z Basic form AD. Please indicate form AF (prev. B) in your order.
3 STANDARD PRORAMME Shrink Chucks 123 Shrink Chuck ISO , Form AD/AF (prev. DIN AD/B), long narrow design, ISO Form AD/AF 2.5 SK/ISO Dimensions sw Weight l 1 l 2 l 3 l Z/ Z/ Z/ Z/ Z/ Z/ Z/ Z/ Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M8x Z/ M8x Z/ M8x Z/ M10x Z/ M10x Z/ M10x Z/ M10x Z/ M10x Z/ M10x Z/ M12x Z/ M12x Z/ M12x Z/ M12x Z/ M12x Z/ M12x Z/ M16x Z/ M16x Z/ M16x Z/ Shrink Chucks Basic form AD. Please indicate form AF (prev. B) in your order.
4 138 STANDARD PRORAMME Shrink Chucks Shrink Chuck DIN A Narrow design, DIN Form A 2.5 HSK-A Dimensions sw Weight l 1 l 2 l 3 l M Z M Z M Z M Z M Z M8x Z M10x Z M10x Z M12x Z M12x Z M16x Z MQL-capable design possible on request.
5 STANDARD PRORAMME Shrink Chucks 139 Shrink Chuck DIN A Long narrow design, DIN Form A 2.5 HSK-A Dimensions sw Weight l 1 l 2 l 3 l Z/ Z/ Z/ Z/ Z/ Z/ Z/ Z/ Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M8x Z/ M8x Z/ M8x Z/ M10x Z/ M10x Z/ M10x Z/ M10x Z/ M10x Z/ M10x Z/ M12x Z/ M12x Z/ M12x Z/ M12x Z/ M12x Z/ M12x Z/ M16x Z/ M16x Z/ M16x Z/ Shrink Chucks MQL-capable design possible on request.
6 148 STANDARD PRORAMME Shrink Chucks Shrink Chuck DIN A Narrow design, DIN Form A 2.5 HSK-A Dimensions sw Weight l 1 l 2 l 3 l M Z M Z M8x Z M10x Z M10x Z M12x Z M12x Z M16x Z MQL-capable design possible on request.
7 STANDARD PRORAMME Shrink Chucks 149 Shrink Chuck DIN A Long narrow design, DIN Form A 2.5 HSK-A Dimensions sw Weight l 1 l 2 l 3 l M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M8x Z/ M8x Z/ M8x Z/ M10x Z/ M10x Z/ M10x Z/ M10x Z/ M10x Z/ M10x Z/ M12x Z/ M12x Z/ M12x Z/ M12x Z/ M12x Z/ M12x Z/ M16x Z/ M16x Z/ M16x Z/ Shrink Chucks MQL-capable design possible on request.
8 162 STANDARD PRORAMME Shrink Chucks Shrink Chuck DIN E Narrow design, DIN Form E 2.5 HSK-E Dimensions sw Weight l 1 l 2 l 3 l M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/
9 STANDARD PRORAMME Shrink Chucks 165 Shrink Chuck DIN E Narrow design, d1 DIN Form E 2.5 HSK-E Dimensions sw Weight l 1 l 2 l 3 l M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M8x Z/ M Z/ M Z/ M10x Z/ Shrink Chucks
10 168 STANDARD PRORAMME Shrink Chucks Shrink Chuck DIN E Narrow design, DIN Form E 2.5 HSK-E Dimensions sw Weight l 1 l 2 l 3 l M Z/ M Z/ M Z/ M Z/
11 STANDARD PRORAMME Shrink Chucks 169 Shrink Chuck DIN E Long narrow design, DIN Form E 2.5 HSK-E Dimensions sw Weight l 1 l 2 l 3 l M Z/ M Z/ M8x Z/ M10x Z/ Shrink Chucks
12 STANDARD PRORAMME Shrink Chucks 173 Shrink Chuck DIN F Narrow design, DIN Form F 2.5 HSK-F Dimensions sw Weight l 1 l 2 l 3 l M M M M M M8x M10x M10x M12x M12x M16x Shrink Chucks
13 174 STANDARD PRORAMME Shrink Chucks Shrink Chuck DIN F Long narrow design, DIN Form F 2.5 HSK-F Dimensions sw Weight l 1 l 2 l 3 l / / / / / / M / M / M / M / M8x / M8x / M10x / M10x / M10x / M10x / M12x / M12x / M12x / M12x / M16x / M16x /
14 180 STANDARD PRORAMME Shrink Chucks Shrink Chuck ISO (JIS B6339) Narrow design,, coolant supply as per ISO , Form JD/JF ISO Form JD/JF 2.5 BT Dimensions sw Weight l 1 l 2 l 3 l M Z M Z M Z M Z M Z M8x Z M10x Z M10x Z M12x Z M12x Z M16x Z Basic form JD. Please indicate form JF (prev. B) in your order. Custom designs and version with face connection on request.
15 STANDARD PRORAMME Shrink Chucks 181 Shrink Chuck ISO (JIS B6339) Long narrow design,, coolant supply as per ISO , Form JD/JF d2 ISO Form JD/JF 2.5 BT Dimensions sw Weight l 1 l 2 l 3 l Z/ Z/ Z/ Z/ Z/ Z/ Z/ Z/ Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M Z/ M8x Z/ M8x Z/ M8x Z/ M10x Z/ M10x Z/ M10x Z/ M10x Z/ M10x Z/ M10x Z/ M12x Z/ M12x Z/ M12x Z/ M12x Z/ M12x Z M12x Z/ M16x Z/ M16x Z/ M16x Z/ Shrink Chucks Basic form JD. Please indicate form JF (prev. B) in your order. Custom designs and version with face connection on request.
16 STANDARD PRORAMME Shrink Chucks 193 Shrink Extension As flexible adaptation, length adjustment screw (from ø 6mm) Tool length as per customer request possible 4.5 Dimensions sw Weight l 1 l 2 l 3 l Z Z Z M Z Shrink Chucks Z Z Z M Z M Z Z Z Z M Z M Z M8x Z M10x Z
17 194 STANDARD PRORAMME Shrink Chucks Shrink Extension As flexible adaptation, length adjustment screw (from ø 6mm) Tool length as per customer request possible 4.5 Dimensions sw Weight l 1 l 2 l 3 l Z Z Z M Z M Z M8x Z M10x Z M10x Z M10x Z M Z M Z M8x Z M10x Z M10x Z M10x Z M10x Z M10x Z
18 STANDARD PRORAMME Shrink Chucks 195 Coolant Transfer Pipe For DIN A/E HSK Weight Stop Screw direct clamping For axial length adjustment Shrink Chucks l SW SW sw l Weight M M M M M8x M10x M12x M16x M16x
19 196 STANDARD PRORAMME Shrink Chucks Hexagonal T-key For axial length adjustment sw l Weight ISO Protective loves Weight
20 STANDARD PRORAMME Shrink Chucks 197 Length Presetter for Shrink Chucks The WTE Length Presetter is used for easy length presetting of the tools before the shrink process. The stop screw must have a hexagon socket on two sides for length presetting with the appropriate careful and precise work method even with shrinkage accuracies of ± 0.02 mm are achieved. sw l Dimensions sw For Weight l 1 l WTE Shrink Chucks WTE Shrink Chucks WTE Shrink Chucks WTE Shrink Chucks WTE Shrink Chucks WTE Shrink Chucks WTE Shrink Chucks WTE Shrink Chucks WTE Shrink Chucks WTE Shrink Chucks HSK 50; HSK 80;100/SK/BT WTE Shrink Chucks HSK HSK 80;100/SK/BT HSK HSK 80;100/SK/BT Shrink Chucks
31 avenue des lacs SCIONZIER Tel : Fax :
84 STANDARD PRORAMME High Performance Holder 31 avenue des lacs 74950 SCIONZIER Tel : 04 50 18 030 27 Fax : 04 50 18 30 28 md@mecadiffusion.net www.mecadiffusion.com STANDARD PRORAMME High Performance
More informationSTANDARD PROGRAMME Hydraulic Chucks
20 STANDARD PRORAMME STANDARD PRORAMME 23 Hydraulic Chuck ISO 7388-1, Form AD (prev. DIN 69871-AD), extra short design d 1 d 2 d 3 l3 ISO 7388-1 Form AD 3 µm h6 2.5 25000 min Nominal size SK/ISO Dimensions
More informationStandard Programme Clamping Technology. The tool specialists for the trade.
Standard Programme Clamping Technology The tool specialists for the trade. Direction Leipzig 4 Direction Dresden Direction Erfurt Chemnitz 72 95 The tool specialists for the trade. WTE Präzisionstechnik
More informationGUHROSync Synchro tapping chucks. the Best of. Guhring - your world-wide partner
the Best of BOTH SYSTEMS The advantages of Hydraulic chucks & in one tool holder Now also available with ISO taper, MAS/BT and straight shank GUHROSync Guhring - your world-wide partner GUHROSync THE EASY
More informationStandard Programme Common Price List 2016 CLAMPING TECHNOLOGY. The tool specialists for the trade.
Standard Programme Common Price List 2016 CLAMPING TECHNOLOGY The tool specialists for the trade. 2 STANDARD PROGRAMME Introduction HIGH PRECISION MADE IN GERMANY WITH COURAGE TO INNOVATE! WTE Präzisionstechnik
More informationModules for fine machining. Guhring modules 6x6 and 4x4. NEW: Module 6x6
NEW: Module 6x6 simple, quick and highly accurate setting of 6-fluted tools minimal tension thanks to 6 setting elements perfect balancing with 6 balancing screws Modules for fine machining Guhring modules
More informationAccessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
More information/1505-I-20 TOO L HO L DERS 2015 GM 300
TO O L H O L D ERS A N D C L A M PI N G D E V I C ES 114 996/1505-I-20 ED I T I O N 2015 TOO L HO L DERS 2015 GM 300 high camping ce PERFECT CONCENTRICITY MAXIMUM OPERATIONAL SAFETY OPTIMAL COOLANT DELIVERY
More informationGood reasons to use Albrecht drill chucks
3 * Good reasons to use Albrecht drill chucks Quality 2-phase quality control e.g. 100% run-out accuracy test (similar to DIN 10888) parts made to fit each other exactly working parts are case-hardened
More informationShrinkage method clamps a cutting tool firmly by heating and cooling the chuck. High precision and strong Clamping force.
SRS Shrinkage method clamps a cutting tool firmly by heating and cooling the. High precision and strong Clamping force. (Slim Type) Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit
More informationFMH. Metric Sizes. Face Mill Arbor (For Cutters With Oil Hole) Type1. Type3. Type2. Type5. Type4
FMH Face Mill Arbor (For Cutters With Oil Hole) Coolant flows from the end face of centering location to cutter with oil hole. Type2 Type1 Type3 Type4 Type5 Code Model Type D1 L1 C1 C2 H1 B1 K1 C3 H2 Clamp
More informationGTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
More informationWINNER! ALBRECHT. Precision Chucks
WINNER! ALBRECHT Precision Chucks At present, the Albrecht APC is the best performing chuck world wide. In the area of speed, tool life and safety. 3 4 You can expect: A clearly higher chip removal rate
More informationenduring. Drill Chucks NC-Tooling 2013/2014
enduring. Drill Chucks NC-Tooling 2013/2014 www.roehm.biz DRILL CHUCKS - NC-TOOLING Keyless drill chucks EXTRA 1004 EXTRA-RV 1005 SUPRA 1006 SUPRA-SK 1008 SUPRA-SK E 1008 SPIRO - SPIRO-SK 1009 Key-type
More informationRotary inlets for pressurised oil, compressed air
Rotary inlets for pressurised oil, compressed air Product data sheets Rotary inlets for pressure oil, single channel 0086-010-size-160 9.03.00 Rotary inlets for pressure oil, two- channel 0088-226/326-size-010040
More informationClamping Tools
Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves
More informationSHRINK FIT CHUCKS CAT BT HSK CAPTO.
SHRINK FIT CHUCKS CAT BT HSK CAPTO www.haimer.com HAIMER SHRINK FIT TECHNOLOGY Features Benefits 360 Clamping, Multiple planes Precision bore, no wear components No mechanical moving parts Induction shrink
More informationDriven Toolholders for MAZAK Machines
Driven Toolholders for MAZAK Machines We do Specials! Manufacturer of Precision Tools since 1974 Table of Contents Type Page Driven Toolholders QTNX 100 + SQT 10 8-15 QTNX 200 / 250 + SQT 15 + SQ 200 /
More informationDATA PD SV13.., SV14.. Levelling Valves. Product. Function. Technical Features. Range Overview
Commercial Vehicle Systems Product DATA Doc. No. Y075 (EN - Rev. 00) PD-500-000 Function On vehicles fitted with air suspension, the Levelling Valve ensures that the axle suspension air bags maintain a
More informationBILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & ccessories Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD CNC Toolholders C O N T E N T S Introduction 3 CT40 CT40
More informationSlow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
More informationOrder No light grey. Order No black
DPP- Plastic dome plug Body: Polyamide (V2 acc. to UL94) Sealing: Neopren Dynamic: -20 ~+80, short term:100 _ Easy and quick assembly Color: RAL7001 silver grey RAL7035 light grey RAL9005 black Blue, Red
More informationMINIMAT Screwdrivers. Handheld Screwdriver pneumatic
Screwdriving Technology Automation Air Motors Air Tools MINIMAT Screwdrivers The basic solution for almost all screwdriving tasks angle head design torque from 0.3-65 Nm / 3 to 575 in.lbs robust highest
More informationAlberti TURBODRILL/TURBOFLEX Ø25 Ø80 ER40 3/30
350 5 TURBODRILL/TURBOFLEX 139 79 53 11 184 0 10 Ø25 Ø80 86 ER40 3/30 131 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com TURBODRILL &
More informationModular Spindle Technology. Productivity Solutions.
Modular Spindle Technology Productivity Solutions Kuvam s Phylosophy: We at Kuvam Technologies believe in win~win~win relationship i.e. Win for the customer, Win for the team and Win for the company. WIN
More informationMINIMAT Control Screwdrivers
Screwdriving technology Automation Air motors Air tools Handheld Screwdriver pneumatic MINIMAT Control Screwdrivers The basic solution for almost all screwdriving tasks angle head design torque from 0.3-65
More informationQuick-change adapters, positive drive inch sizes
P Quick-change adapters, positive drive inch sizes For quick change tap chucks T, TIC, NC and SPD QC, with or without internal coolant system. Features and dvantages n equally appropriate for taps with
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are
More informationHSK F80 MAKINO S HRINK FIT C H UCK S
Haimer F80 Makino 4.5 HSK F80 MAKINO S HRINK FIT C H UCK S M6 Thread for balancing screws D1 D2 CERTIFICATE OF QUALITY A 10mm L Adjustable back-up screw with fl ats for coolant drainage from diam. 1/4
More informationHIGH PRECISION HIGH PERFORMANCE
Tool holders www.haimer-usa.com HIGH PRECISION HIGH PERFORMANCE HAIMER Family owned & operated since 1977 Global Headquarters located in Igenhausen Germany North America operation and stocking facility
More informationTradition in Perfection.
Angular Heads Tradition in Perfection. For more than 50 years the name ROMAI has stood for the highest precision and process reliability in machining. The next generation begins today. We have succeeded
More informationHigh Speed Jet Spindle
1/28 High Speed Jet Spindle 2/28 High speed jet spindle TaeguTec has launched a revolutionary new high-speed spindle developed for applications using high RPM for small diameter tools that can be used
More informationA type Ejectors (in line) Dimensions and weights
A type Ejectors (in line) Dimensions and weights Our A type ejectors have the best efficiency and are therefore our most commonly sold type. The motive water is coming from the side and suction is created
More informationPENCIL DESIGN. Hydraulic high precision toolholder Pencil version. Benefits and features
PENCIL DESIGN Benefits and features For drilling to finishing Pencil design enabling machining in deep cavities and complex components Special designs possibility High clamping force 6 Nm is with its extreme
More informationUSE-USU. Steel independent chucks. Steel independent chucks USE-USU
USE-USU The jaws can be centered approximately by adjusting them to the concentric grooves, accurate centering requires the use of a dial indicator. Independent 4-jaw chuck Technical features: - jaws individually
More informationCNC Double Column Machining Center. SDV-H Series SDV Series.
CNC Double Column Machining Center www.sigmacnc.com.tw Special Patent Design Construction Features The Motion of Z-axis is Supported by 2 Linear Guideways The Motion of Z-axis is Supported by 4 Linear
More informationTechnical Notes To DIN 933, ISO 4017.
Hexagon Head Bolts wit tread up to ead, DIN 933, 6101 d l A/F A0013.A6 6101 To DIN 933, ISO 4017. Order No. Tread l A/F Finis A0013.050-020-A6-00 M 5 20 3,5 8 unfinised A0013.050-025-A6-00 M 5 25 3,5 8
More informationReaming and Fine Boring
Reaming and Fine Boring MAPAL Competence Reaming and Fine Boring Tool with guide pads Fixed reamers Competence Reaming and Fine Boring Today reaming and fine boring are the most widely used methods for
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your
More informationBalanced to G RPM s. the nose nut to be tightened to 100% Inspected,
WEER CHUCKS Mae in Why is the Weler Chuck the Best Choice? WHY THE esigne for Milling & rilling WEER CHUCK? The Weler Chuck is the most versatile chuck available in the market place toay! Balance to G2.5
More informationVýhradní zastoupení v České republice: PM-TECH s.r.o Tel: (00420)
HSK DIN 69893 / ISO12164.1 Forms Characteristics.3 Features Benefits.4 Information.6 HSK-A ER.10 HSK-C ER.12 HSK-E HSK-F ER.13 Toolholder for Micromachining.14 HSK-E ER MS.14 Softsynchro Tapping Holders.16
More informationEVOLUTION LINE ANGLE HEADS
EVOLUTION LINE NGLE HEDS by History 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the 1973 Parlec begins producing and distributing the Numertap and utofacer 1977 Parlec expands
More informationDATA PD LS1..., LS2..., LS3... Lift Axle Valves - Pneumatic. P r o d u c t. Function. Technical Features
C o m m e r c i a l V e h i c l e S y s t e m s P r o d u c t DATA PD-503-200 Function Pneumatic Lift Axle Control Valves are used for the semi-automatic or fully automatic control of air suspended lift
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More information10. MOULD CLAMPING. 212 Moulding Supplies Edition 9 // POWER CLAMPS 10.2 STANDARD CLAMPS
10. MOULD CLAMPING 213 214 10.1 POWER CLAMPS 10.2 STANDARD CLAMPS 212 Moulding Supplies Edition 9 // www.mouldpro.com POWER CLAMPS POWER SLIDING CLAMP Part No. Thread Size h-min h-max s e1 d sw L e b c
More informationGRIPPERS & ACCESSORIES CATALOGUE
GRIPPERS & ACCESSORIES CATALOGUE CONTENTS TOOL STANDARDS... 4 MEDIUM TRANSFER... 5 STEEP TAPER 30... 6 STEEP TAPER 40... 8 STEEP TAPER 50... 10 STEEP TAPER 50 REINFORCED... 12 INDIVIDUAL COMPLETE SOLUTIONS
More informationHigh Frequency Spindles
High Frequency Spindles 344 Bloor Street W, Suite 607, Toronto, ON Canada M5S 3A7 www.lprglobal.com www.uskoreahotlink.com Tel.: +1 416-423-5590 E-Mail: info@lprglobal.com Table of Contents Introduction
More informationLow Pressure Series KL
Low Pressure 35 Nom. Type Material Max. static working C v value Cross Page bore pressure at 20 C both sides one side both sides one side section [bar] [psi] self sealing self sealing [mm 2 ] 6 KL-006
More informationArbours for PSC Polygon Shank Tooling
Arbours for Polygon Tooling CAT V-FLANGE to Taper CV 40 Designation L L1 kg SPECIAL CV40ADB--1.57 1.57.827.95 CV40ADB-50-1.97 50 1.97 1.22 1.00-69871 -AD Taper to Designation L L1 kg SPECIAL 40 69871-A40-50-1.18
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Design and Function 7 6 5 9 2 5 6 7 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
More informationIT.TE.DI. Milling. TEDI MILL The Perfect Answer. TEDI MILL PCD Shell Type Face Mill Cutters Integral Face Mill Cutters
IT.TE.DI. Milling 03 TEDI MILL PCD Shell Type Face Mill Cutters Integral Face Mill Cutters TEDI MILL Cartridges 04 08 14 20 TEDI MILL The Perfect Answer TEDI MILL CBN Shell Type Face Mill Cutters Integral
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationIntroduction 3. Motorized Milling, Drilling and Tapping Spindles 5. Motorized Grinding Spindles 6. Motorized Air Bearing Spindles 8
High Spindles 344 Bloor Street W, Suite 607, Toronto, ON Canada M5S 3A7 www.lprglobal.com www.uskoreahotlink.com Tel.: +1 416-423-5590 E-Mail: info@lprglobal.com Contents Introduction 3 Motorized Milling,
More informationDIN SK40 SK45 SK50. COLLET CHUCK HOLDER Standard Length...44 Extended Length...45 Short...46 TAPPING COLLET CHUCK HOLDER...
IN 69871 SK40 SK45 SK50 COET CHUCK HOER Standard ength...44 Extended ength...45 Short...46 TAPPING COET CHUCK HOER........ 47 SHRINK FIT HOER...48 SIE OCK HOER Short & Standard ength...49 FACE MI ARBORS...50
More informationFor applications with high axial play. For applications with reduced mounting space
Fig. Example of use Use : Pitch circle diameter Suitable for encoders Page high axial play 8.000.4K00.0000 cylindrical pin Long spring element 0 mm A020, A02H 9080, 908 262 reduced mounting space 8.000.4J00.0000
More informationDATA PD BS7... Spring Brakes (Disc), diaphragm/diaphragm. Product. Function. Technical Features
Commercial Vehicle Systems Product DATA PD-415-200 Function This range of Spring Brakes is used on axles fitted with air disc brakes and provides the service and parking brake functions. The internal wind
More informationA global range. Extra hard for extra performance: the extra hard Bosch bits. Equipped for any application
Screwdriving 146 Screwdriving Overview Bosch Accessories 11/12 A global range Bosch shows how it s done. With a universal and comprehensive screwdriver bit range which has a bit to suit every application
More informationAir vane motors for special applications
Screwdriving technology Automation Air motors Air tools Air vane motors for special applications drilling motors 80-600 W milling motor 400 W grinding motors 150-1000 W robust and precise bearing high
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet Design and Function 7 6 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b
More informationGN 23. Stainless Steel-Levelling feet
GN 23 Stainless Steel-Levelling feet technical informations Specification Type (Base plate) - Type D0: fine turned, without rubber underlay - Type D1: fine turned, with rubber underlay, inlaid, black Version
More informationCAPTIS. The modular and flexible system for internal and external clamping
NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
More informationIT.TE.DI. Milling. TEDI MILL The Perfect Answer. TEDI MILL PCD Shell Type Face Mill Cutters Integral Face Mill Cutters
IT.TE.DI. Milling 03 TEDI MILL PCD Shell Type Face Mill Cutters Integral Face Mill Cutters TEDI MILL Cartridges 04 08 14 20 TEDI MILL The Perfect Answer TEDI MILL CBN Shell Type Face Mill Cutters Integral
More informationAlberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12
Alberti LIVE TOOLS 77 40 117 184 55 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 67 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com Alberti
More informationHPI - PIONEER Premium Tool Holding & Work Holding SG - Second Generation Tool Holding System
HPI - PIONEER Premium Holding & Work Holding SG - Second Generation Holding System The Pioneer Group We have been in the metal cutting industry for over three decades and contributed to the progress of
More informationIndustrial Drill Chucks & Live Centers
Since 1957 Industrial Drill Chucks & Live Centers 2 From our headquarters in the province of Barcelona, Spain, Llambrich Precision, S.L. has been designing and manufacturing drill chucks and machine tool
More informationKTA SPINDLE TOOLINGS
Price INR R 2013 KTA SPINDLE TOOLINGS SILVER SERIES PRECISION TOOL HOLDERS FOR CNC MACHINES HSK DIN 69893-1 FORM A Features : Special Material with Tensile NEW 2 strength inthe Core Min 950 N/mm. Case
More information124
124 www.danahermotion.com Linear Units Linear Rod Units VarioLine, Movotrak Linear units with rod Perfect for hydraulics and pneumatics replacement Load up to 40 000 N High accuracy ball screw drive High
More informationUX series. Value model UX300. Offer max. value for small parts up to Ø400 x 300 mm / 100 kg. Motor SIEMENS = S HEIDENHAIN = H.
UX SERIES UX series Value model UX300 Offer max. value for small parts up to Ø400 x 300 mm / 100 kg SIEMENS = S HEIDENHAIN = H Motor UX300 9B 12B 15C 24A X / Y / Z (kw) H 5.1 / 5.4 / 5.4 S A / C (kw) H
More informationCoA. Constant Face Drivers. Constant Face Drivers CoA
CoA Constant Face Drivers CoA - hydraulic pressure compensation provides a uniform clamping force also on uneven faces of workpieces - approx. value for an axially admitted total load of the 3 supporting
More informationSpare part list 2015 MAB 825 Motor Drawing
MAB 825 Motor Drawing MAB 825 Motor Pos. No. Article no. Description pc 1.1.1 5013911 Armature 110V 1 1.1.2 5050061 Armature 230 V 1 1.2.1 5012551 Field coil 110 V 1 1.2.2 5011611 Field coil 230V 1 1.3.1
More informationBORING SYSTEMS INFO. 3 nd edition
BORING SYSTEMS INFO 3 nd edition April 25 TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY TECHNOOGY FOR HIGH PRECISION Ingersoll
More informationMQL SHRINKFIT HOLDERS
MQL SHRINKFIT HOLDERS Safety first Safety is our top priority Emergency Exit Emergency Number Protective Equipment Assembly Point Alarm 2 What is MQL? MQL: Minimum Quantity Lubrication Mix of air and oil
More informationLIFTKET wire rope winch with wall bracket or foot support
Issue August 2014 Spare part list LIFTKET wire rope winch LSF 175/1-19 LSF 200/1-15 LIFTKET wire rope winch with wall bracket or foot support SP-Code Description Description of spare part section Page
More informationAxial Piston Variable Pump A2VK
Axial Piston Variable Pump A2VK RE 94001/06.10 1/12 Replaces: 07.04 Data sheet Size 12 to 107 Series 1 and 4 Nominal pressure 250 bar Maximum pressure 315 bar Version for pumping plastic components Contents
More informationSpare part list 2014 MAB 1300 Motor Drawing
MAB 1300 Motor Drawing MAB 1300 Motor Article no. Description pc 1.1.1 5013931 Armature 110V 1 1.1.2 5013921 Armature 230V 1 1.2 5011301 Ball bearing 6000 2Z 1 1.3 5013941 Seal ring 10x14x1 1 1.4 5013951
More information1.5. 7,250 psi Stainless steel V2A. 7,250 psi Stainless steel V2A. PUR cable type 3 IP 68 Embeddable 600 Hz Table 6 Diagram
43 1 1 14,9 47 1 9 9 7 Max. operating pressure Sensing face HIGH-PRESSURE-RESISTANT P12 see page 7 see page 14 9 Compatible connectors DW-AD-01-P12-39 DW-AD-03-P12-39 DW-AD-01-P12-2 DW-AD-01-P12-27 DW-AS-01-P12-24
More informationDriven Toolholders for HAAS Machines
riven Toolholders for HAAS Machines Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INIVIUALITY QUALITY SERVICE Tale of Contents Type Page riven Toolholders SL 20 / SL 30 8-11 Modular Tool
More informationSERIES DL SERIES. High Performance Double Column Machining Center YIH CHUAN MACHINERY INDUSTRY CO., LTD. Double Column Milling
DL SERIES Double Column Milling EXCELLENT TRUSTWORTHY ON AND ON YIH CHUAN MACHINERY INDUSTRY CO., LTD 40755 8, 9 th Rd., Taichung Industrial Park, Taichung, Taiwan TEL : +886-4-2359-3351 FAX : +886-4-2359-0012
More informationSpare part list 2015 MAB 845 Motor Drawing
MAB 845 Motor Drawing MAB 845 Motor Article no. Description pc 1.1.1 5013911 Armature 110V 1 1.1.2 5050061 Armature 230V 1 1.2.1 5012551 Field coil 110V 1 1.2.2 5011611 Field coil 230V 1 1.3.1 5050051
More informationVane Air Motors - P1V-B
Vane Air Motors - P1V-B These large motors are designed for use in the most arduous applications, requiring considerable power, torque, robustness and reliability Operating information Working pressure:
More informationHydraulic Clamping Systems
Hydraulic Clamping Systems Hydraulic screw-in cylinder, single action Operating pressure max. 350 bar / min 100 bar These hydraulic crew-in cylinder are single acting and with spring retraction. They can
More informationStandard Parts for Mould Making
Standard Parts for Mould Making Index Your Production Partner 4-5 Guide Elements Locating units, round 8 Locating units, flat 8 Compensation Discs 9 Adjusting washers 9 Ejector rods 10 Centering sleeves
More informationHES810 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE
ispeed E0 E0 E00 E000 ø0." ø0.9" ø0." ø0.9" HES0 -p0 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE Specifications Speed... 0,000-0,000 min - (rpm) Ideal Operating Speed... 0,000-0,000 min - (rpm) Max. Output
More informationCollet chucks KSZ-MB KSZ-NZ KSZ-AZL NEW NEW SMW-AUTOBLOK 147. Группа компаний "Штрай" Москва, ул. Островитянова, 13
Collet chucks KSZ-MB Collet chuck Power operated collet chucks for bar machining quick collet change Page 148 KSZ-DZ Draw collet chuck for bars KSZ-AZ Draw collet chuck with workstop Page 152 Page 155
More informationcompact magnetic cylinders
CATALOGUE > Release 8.7 > Series 32 cylinders Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»»
More informationIPVS High-pressure Internal Gear Pumps Technical Data Sheet
IPVS High-pressure Internal Gear Pumps Technical Data Sheet Functional Drawing 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing segment 5 Axial
More informationACTUATING Standard programme TOOLTRONIC and facing heads
84 ACTUATING Standard programme TOOLTRONIC and facing heads ACTUATING Standard programme TOOLTRONIC and facing heads 85 85 Standard programme TOOLTRONIC / facing heads FACING HEADS Facing heads are used
More informationTooling for Swiss Automatics
Tooling for Swiss Automatics MANUFACTURED IN SWITZERLAND Swiss Precision Tools I S O 9 0 0 1 CERTIFIED SWISS PRECISION SWISS QUALITY Providing tolerances unmatched in the industry TIR (in) REGO-FIX Cylindrical
More informationCooling Systems FLKS - 3S/1.0/W... FLKS - 3L/1.0/W DESCRIPTION
Cooling Systems FLKS - S/1.0/W... FLKS - L/1.0/W... 1. DESCRIPTION 1.1. APPLICATIONS Cooling circuits: Cooling of AC main drives Cooling of motor spindles on machining centres Cooling of transmission and
More informationProduct overview. Joints. Circlips for ball seats DIN K0714. Quick plug couplings with radial offset compensation K0709. Page 837.
Joints 825 Product overview Joints Quick plug couplings with radial offset compensation K0709 Quick plug couplings with radial offset compensation and screw-on flange K0710 Quick plug couplings with angular
More informationTorque Tools. Torque Tools. Series Series Torque-indicators 300. Series Series Series Insert Tools 309
290 07 Torque Tools Series 7400 294 Series Torque-indicators 300 Torque Tools Series 7100 304 Series 7000 306 Series Insert Tools 309 291 Have you ever over or under tightened screws? Wera torque tools
More informationBMT 65 TOOLING BENZTOOLING.COM
BMT 65 TOOLING BENZTOOLING.COM Table of Contents Output Spindle Options Page 2 BENZ LinA Broach Page 4 & 11 Quick Change Options Page 3 & 14 Axial Live s Page 5 Offset Axial Live s Page 6 Radial Live s
More informationSteel / Cast iron body Independent chucks
Independent chucks Steel / Cast iron body Independent chucks Independent 4-jaw chucks - Jaws individually adjustable through threaded adjusting spindle. RÖHM-Independent chucks in steel or cast iron design
More informationWe set the standard for the highest precision and most advanced technology in the machine tool accessory market
ANGLE HEADS heimatec GmbH-Renchen, Germany Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility, on 7.5 acres, is home to over 100
More informationStandard with cone bushing. Backlash-free Safety Clutch
EAS -Compact ratchetting clutch/synchronous clutch The Backlash-free Safety Clutch for Standard with cone bushing Packaging Machinery Machine Tools Paper Machinery Indexing Drives Servo Motors EAS -NC
More informationStainless Steel Cylinders, ISO 6432, Bore 10-25mm - P1S
This range of stainless steel cylinders has been specially designed for use in difficult environments. Hygienic design, external seals of flourianted rubber and prelubrication with our food-industry-approved
More informationLive and Dead Centres
s w i t z e r l a n d Live and Dead Centres 1. Live-Centres 1.1 Main-Line ROTOR Main-Line, the approved top of the range for lathes and grinding machines. Very precise and robust construction. Made for
More informationQUICK-ACTING JAW CHANGE SYSTEM
QUICK-ACTING JAW CHANGE SYSTEM The RÖHM key bar chucks with quick-acting jaw change system convince in two ways. On the one hand the jaws can be quickly and easily turned, changed or offset over the entire
More informationZG-ZS. Geared scroll chucks. Geared scroll chucks ZG-ZS
The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high runout accuracy and very high repeatability are required. For use on
More informationZGU-ZSU heavy design. Geared scroll chucks. Geared scroll chucks. ZGU-ZSU heavy
ZGU-ZSU heavy design Type 303 3-jaw-chuck cylindrical centre mount The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high
More information