Fertigation. Injectors AirJection Injectors Suction and Bypass Kits Parts & Accessories FERTIGATION FERTIGATION
|
|
- Rosalind Marsh
- 5 years ago
- Views:
Transcription
1 Fertigation Injectors AirJection Injectors Suction and Bypass Kits Parts & Accessories
2 Injectors Injector Product Range - Models and Kit Assemblies Injector Model Numbers PVDF Black Polypropylene Black Injector Size In/Out Maximum Bars GPH LPH Suction Line Kit Only Bypass & Suction Line Kit 283 X X 1/ K184 K184-A 287 X X 1/ K184 K184-A 384 X X 1/ K184 K184-A 384X X X 1/ K184 K184-A 484 X X 1/ K184 K184-A 584C X X 1/ K184 K184-A 484A X X 3/ K184 K184-B 484X X 3/ K184 K184-B 584 X X 3/ K184 K184-B 684 X 3/ K184 K184-B X X K183/ KR183 K181-A X-02 X X K183/ KR183 K181-A X X K183/ KR183 K181-A A X X 1 1/ K183/ KR183 K183-A 1585X X X 1 1/ K183/ KR183 K183-A 1587 X X 1 1/ K183/ KR183 K183-A 2081A X X K282/ KR282 K282-A 2083X X X K282/ KR282 K282-A 3090 X N/A N/A 4091 X N/A N/A Note: The 1 with Model # ending in 02 have a check valve design that is the same as the 1 1/2. Mazzei Injectors - PVDF * 1/2 283-PVDF /2 287-PVDF /2 384-PVDF / MTO 384X-PVDF / MTO 484-PVDF / MTO 584C-PVDF / MTO Mazzei Injectors - PVDF * 3/4 484A-PVDF / MTO 484X-PVDF / PVDF / PVDF / Mazzei Injectors - PVDF * PVDF X-02-PVDF PVDF Mazzei Injectors - PVDF * 1 1/2 1583A-PVDF / X-PVDF / MTO Mazzei Injectors - Polypropylene Qty Wt (lbs) 283-PP / PP / PP / X-PP / PP / C-PP /2 484A-PP / PP / PP X-02-PP PP A-PP / X-PP / PP / MTO 2081A-PP X-PP PVDF / MTO Mazzei Injectors - PVDF * A-PVDF X-PVDF MTO Mazzei Injectors - PVDF * 3 and PVDF MTO 4091-PVDF MTO Note: Mazzei is a trademark of Mazzei Injector Company, LLC. * PVDF models are used with Chlorine, Sulfuric and Nitric Acid applications
3 AirJection Injectors Suction and Bypass Kits Bag Individual (A-Series) AirJection Injectors - PVDF Suction Kits A /2 Red MTO K Suction line kit for 1/2 and 3/4 Includes: MV-25, S-84, 10 clear vinyl 1/4 ID tubing, A /2 Beige MTO K Suction line kit for 1 and 1 1/2 Includes: MV-50, TA-550,. 10 clear vinyl 1/2 ID tubing, A /2 Orange MTO KR Economy Suction line kit for 1 and 1 1/2. Includes: ball valve, TA-550, S-84, 6 clear vinyl 1/2 ID tubing, MTO A /2 Yellow MTO K Suction line kit for 2. Includes: C-86,S-87, 1 ball valve and connector, 10 clear vinyl 1 ID tubing, A /2 Lime Green MTO KR Economy Suction line kit for 2 Includes: C75R, S-87, 1 ball valve & connector, 6 clear vinyl 1 ID tubing, MTO A /2 Dark Green MTO Bypass Kits A /2 Blue MTO K184-A Bypass and suction line kit for 1/2 Includes: K184 Suction Kit, 1/2 ID 250 PSI tubing, 1/2 hose connectors, and hose A /2 Purple MTO K184-B Bypass and suction line kit for 3/4 Includes: K184 Suction Kit, 3/4 ID 250 PSI tubing, 3/4 hose connectors, and hose A /2 Gray MTO K181-A Bypass and suction line kit for 1 Includes: K183 Suction Kit, 1 ID 250 PSI tubing, 1 hose connectors, and hose A /4 Light Brown MTO A /4 Dark Brown MTO K183-A Bypass and suction line kit for 1 1/2 Includes: K183 Suction Kit, 1 1/2 ID 250 PSI tubing, 1 1/2 hose connectors, and hose K282-A Bypass and suction line kit for 2 Includes: K282 Suction Kit, 2 ID 250 PSI tubing, 2 hose connectors, and hose MTO Manifold (MAI-Series) AirJection Units MAI Unit w/ Model 2081A-PVDF Mazzei Injector MTO MAI Unit w/ Model 3090-PVDF Mazzei Injector MTO
4 Parts & Accessories Liquid Flowmeters 1/2 Connections Check Valves F44250L , GPH/GPM MTO C83-PP /2 Check valve for old-style 1 - polypropylene F44330L , GPH/GPM MTO C83-PVDF /2 Check valve for old-style 1 - PVDF F44375L GPH/GPM MTO C75-CVA /4 Check valve for 2 - PVC (1 1/4 FNPT x 1 hose barb connections) F44376L , GPH/GPM MTO C75R /4 Check valve for 2 - PVC (replacement valve for KR282 Kit) F44500L , GPH/GPM MTO C /4 Check valve for 2 - PVC (replacement valve for K282 Kit) Suction Port Caps - Polypropylene Metering Valves CAP-PP Suction port cap for models 283 & MTO CAP-PP CAP-PP Suction Port Caps - PVDF Suction port cap for 1/2 & 3/4 (excluding 283 & 287) Suction port cap for new-style (-02) 1 & 1 1/ MV MV MV-5-PVDF * Male thread. 1/4 Metering valve for 1/2 & 3/4 - polypropylene & Teflon /2 Metering valve for 1 & 1 1/2 - polypropylene & Teflon * /2 Metering valve for 1 & 1 1/2 - PVDF & Teflon * MTO CAP-PVDF Suction port cap for models 283 & MTO Tubing Adapters CAP-PVDF Suction port cap for 1/2 & 3/4 (excluding 283 & 287) MTO TA /4 x 1/4 ( x Tube Size) MTO TA /8 x 1/4 ( x Tube Size) MTO CAP-PVDF Suction port cap for C83-PP & old style MTO TA /2 x 1/4 ( x Tube Size) MTO CAP-PVDF Suction port cap for new-style (-02) 1 & 1 1/ MTO TA /2 x 1/2 ( x Tube Size) MTO Tubing Clamps CAP-PVDF Suction port cap for 3.0 (to close one suction port) CLAMP# Clamp for 1/4 ID tubing MTO CAP-PVDF Suction port cap for 4.0 (to close one suction port) CLAMP# Clamp for 1/2 ID tubing MTO Check Valve Repair Kits Strainers CR for models 283 & MTO CR for 1/2 & 3/4 (excluding 283 & 287) S Strainer for suction lines, less tubing adapter CR for C83-PP, C83-PVDF & old style MTO S-84 1/ Strainer for suction lines for 1/2 & 3/ CR for new-style (-02) 1 & 1 1/ S-84 1/ Strainer for suction lines for new-style (02) 1 & 1 1/ S-84FV Strainer with foot valve, 3/8 hose barb and 1/2 connector S PVC strainer for 1 suction lines used on MTO
5 INDEX PRICE LIST Part # Model # Price Page Part # Model # Price Page PP... $ PP... $ PP... $ PP... $ C-PP... $ A-PP... $ PP... $ PP... $ X-02-PP... $ PP... $ A-PP... $ X-PP... $ PP... $ A-PP... $ X-PP... $ PVDF... $ PVDF... $ PVDF... $ X-PVDF... $ PVDF... $ C-PVDF... $ A-PVDF... $ X-PVDF... $ PVDF... $ PVDF... $ PVDF... $ X-02-PVDF... $ PVDF... $ A-PVDF... $ X-PVDF... $ PVDF... $ A-PVDF... $ X-PVDF... $ PVDF... $1, PVDF... $3, A3... $ A4... $ A5... $ A7... $ A9... $ A10... $ A12... $ A14... $ A16... $ A20... $ A24... $ MAI $1, MAI $3, K $ K $ K $ K184-A... $ K184-B... $ K181-A $ K183-A... $ K282-A... $ F44250L-8... $ F44330L-8... $ F44375L-8... $ F44376L-8... $ F44500L-8... $ CAP-PP... $ CAP-PP $ CAP-PP $ CAP-PVDF... $ CAP-PVDF $ CAP-PVDF $ CAP-PVDF $ CR-1... $ CR-2... $ CR-3... $ CR-4... $ C83-PP... $ C83-PVDF... $ C86... $ MV $ TA $ TA $ TA $ CLAMP#23... $ S $ S-84 1/4... $ S-84 1/2... $ S-84FV... $ S $ X-PP... $ KR $ KR $ CAP-PVDF $ CAP-PVDF $ C75-CVA... $ C75R... $ TA $ MV-5... $ MV-5-PVDF... $
SEAL RING (KIT CR4) BALL (KIT CR4) SPRING (KIT CR4) 3/4" MALE STRAIGHT THREAD
NOTES: 1. MADE IN THE U.S.A. 1/2" TUBING BARBS (DEFAULT CONNECTION) 2. 3. 4. 5. 6. U.S. PATENT No. 5,863,128 U.S. No. 3,852,076 AND INTERNATIONAL REGISTERED TRADEMARKS MATERIAL: GLASS FILLED POLYPROPYLENE
More informationPRODUCT CATALOG Agriculture
PRODUCT CATALOG Agriculture World Leader in Mixing and Contacting Technologies Differential Pressure Injectors for Fertilization and Other Chemical Applications Product Warranty PERIOD OF WARRANTY. Subject
More informationKIT CR-4 3/4" MALE STRAIGHT THREAD NOTES: MADE IN THE U.S.A. U.S. PATENT No. 5,863,128. U.S. No. 3,852,076 AND INTERNATIONAL REGISTERED TRADEMARKS
NOTES: 1. MADE IN THE U.S.A. 2. U.S. PATENT No. 5,863,128 3. 4. 5. 6. 7. U.S. No. 3,852,76 AND INTERNATIONAL REGISTERED TRADEMARKS MATERIAL: GLASS FILLED POLYPROPYLENE (PP) OR POLYVINYLIDENE FLUORIDE (PVDF)
More informationKIT CR-4. 3mm.13in UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES NOTES: MADE IN THE U.S.A. U.S. PATENT No. 5,863,128
NOTES: 1. MADE IN THE U.S.A. 2. U.S. PATENT No. 5,863,128 3. 4. 5. 6. U.S. No. 3,852,76 AND INTERNATIONAL REGISTERED TRADEMARKS MATERIAL: GLASS FILLED POLYPROPYLENE (PP) OR POLYVINYLIDENE FLUORIDE (PVDF)
More informationI n j e c t o r s. Different Models. Applications Fertigation Chlorination and acidification Water additives ph and EC control
Fertilizer & Chemical proportional water driven injectors, with no ( other energy required I n j e c t o r s A step up from Different Models Applications Fertigation Chlorination and acidification Water
More informationAGRICULTURE GREENHOUSE LANDSCAPE
AGRICULTURE GREENHOUSE LANDSCAPE Fertilizer & Chemical proportional water driven injectors, with no ( other energy required I n j e c t o r s A step up from Different Models Applications Fertigation Chlorination
More informationDEMA SPRAY STATION II MODEL 606T-2 INSTALLATION INSTRUCTIONS
The 0T-2 Spray Station II Dispensers are used in any application where a chemical product must be sprayed or foamed without the use of compressed air or a high pressure pump. City water pressure and optional
More informationWATCH GUARD 440 SERIES FLOAT VALVES INSTALLATION INSTRUCTIONS MODELS: T, TX, T, BT,
WATCH GUARD 440 SERIES FLOAT VALVES INSTALLATION INSTRUCTIONS MODELS: 440-22T, 440-22TX, 440-23T, 440-23BT, 440-24 Overview The Watch Guard 440 Series of float valves fills and maintains fluids in reservoirs.
More informationDEMA SPRAY CLEAN DISPENSERS MODEL 605T INSTALLATION INSTRUCTION
The 605T Spray Clean Dispenser is used in any application where a chemical product must be sprayed or foamed without the use of compressed air or a high pressure pump. City water pressure and optional
More informationDEMA MODELS P203CTC.PI.1,.2,.3 INSTALLATION INSTRUCTIONS
I. PARTS: A. 1 pc. Cyclone Portable Injector B. 1 pc. Foot Strainer & 1/4" I.D. Tubing. C. 1 pc. Ceramic Weight. D. 1 pc. Instruction Sheet D. 2 pc. 3 hose w/ female x female GHT fittings on both ends
More informationSpray Clean 606T-2 Installation Instruction
Spray Clean 606T-2 Installation Instruction Overview The 606T-2 unit is designed to be used as a spray or foam unit where up to two chemicals can be attached to the unit along with a clean water rinse.
More informationThe 606T-2 unit is designed to be used as a spray or foam unit where up to two chemicals can be attached to the unit along with a clean water rinse.
Overview The 606T-2 unit is designed to be used as a spray or foam unit where up to two chemicals can be attached to the unit along with a clean water rinse. The unit features three ball valves for control
More informationDEMA MODEL 606T-WI INSTALLATION INSTRUCTIONS
DEMA MODEL 606T-WI INSTALLATION INSTRUCTIONS I. PARTS: A. Select-O-Spray Assembly B. 2 Pcs. Foot Strainers & 1/4" ID Tubing C. 4 Pcs. Mounting Screws & Anchors D. 1 Pc. 100-15K Metering Tip Kit E. 1 Pc.
More informationDEMA 651AG SINGLE-FEED INSTALLATION INSTRUCTIONS
I. PARTS: A. Dispenser assembly B. 1 pc. 9/16 in. I.D. X 6 ft. vinyl outlet tubing (4 GPM proportioner only). C. 1 pc. 3/8 in. O.D. X 8 ft. vinyl supply tubing, foot valve & ceramic weight. D. 4 pc. #10
More informationTABLE 1. * SPECIFY S Stainless Steel Knob Part No S or Part No ST (for tips) for pressure exceeding 700 PSI.
1. PARTS A. Injector B. Ceramic Weight. C. Plastic tubing 8' long with foot strainer. 2. INSTALLATION The injector may be installed in any position in the water line with the arrow in the direction of
More informationProMinent delta Solenoid Diaphragm Metering Pumps
Overview: delta Ideal for applications requiring metering pump accuracy with minimal pulsation (see page 127 for spare parts and page 134 for control cables) Continuous or pulsating dosing Configurable
More informationGreenhouse and Nursery
Greenhouse and Nursery Misters and Foggers...185 Clik Tif...191 Multi-Outlet Dripper Assemblies...193 Weighted Emitter Assemblies...194 Spray Sticks...199 Chapin Twist Weights...201 183 184 Misters and
More informationMister Mist r Injection Check Valve and Accessories
Mister Mist r Injection Check Valve and Accessories Higher Yields Any Crop 800-446-5328 www.agri-inject.com Mister Mist r Injection Check Valve and Bleeder Valve The ultimate in fluid injection efficiency
More informationDEMA SPRAY CLEAN MODELS: 241CDF & 241CDFT INSTALLATION INSTRUCTIONS
1. PARTS A. Bottle holder and injector assembly. B. Spray gun (Model 40-8B). C. 4 mounting screws in envelope. 2. INSTALLATION Mount the bottle holder on wall using the 4 screws provided through the plates
More informationDEMA MODEL 692T FOAM STATION I INSTALLATION INSTRUCTION
1. PARTS CHECKLIST: ITEM DESCRIPTION QTY. A. Foam Station Assembly 1 B. #10 Screw & Anchor Kit Set (Total: 4 Screws & 4 Anchors) 1 C. Ceramic Weight 1 D. ¼ ID Tubing & Foot Valve Assembly 1 E. Metering
More informationDEMA RAPID FIRE MODELS 6300, , , , 6310, 6300H 6300E, 6300EH, &6310E INSTRUCTION SHEET
I-1002 Pg. 1 of 12 PURPOSE: The RAPID FIRE is a spray system designed with a single knob to control OFF, RINSE and up to two chemicals using a single chemically resistant plastic injector. There is full
More informationDEMA MODELS 606T INSTALLATION INSTRUCTIONS
I. PARTS: A. Select-O-Spray Assembly B. 2 Pcs. Foot Strainers & 1/4" ID Tubing C. 4 Pcs. Mounting Screws & Anchors D. 1 Pc. 100-15K Metering Tip Kit TABLE 1 Hose I.D. 3/8" 1/2" 5/8" Max. Length 15 ft.
More informationACCESSORIES NETAFIM PRESET PRESSURE REGULATORS I BERMAD ADJUSTABLE REGULATORS NETAFIM PRESET PRESSURE REGULATORS BERMAD ADJUSTABLE REGULATORS
NETAFIM PRESET PRESSURE REGULATORS I BERMAD ADJUSTABLE REGULATORS NETAFIM PRESET PRESSURE REGULATORS Sealed regulating units which are field replaceable Zero leakage Built in pressure indicator signs when
More informationDEMA MODEL 604T-WI INSTALLATION INSTRUCTIONS
DEMA MODEL 604T-WI I. PARTS: A. Select-O-Matic Assembly B. 2 Pcs. Foot Strainers & 1/4" ID Tubing C. 4 Pcs. Mounting Screws & Anchors D. 1 Pc. 100-15K Metering Tip Kit (604T Only) E.1 Pc. Backflow Preventer
More informationDEMA SPRAY CLEAN MODELS: 244CDF & 244CDFT INSTALLATION INSTRUCTIONS
I. PARTS: A. Injector. B. Spray gun. C. Mounting screws and washers. D. Vinyl supply tubing, foot strainer & ceramic weight. E. Metering tip (specified size, model 244CDFT only). II. INSTALLATION: (See
More informationDEMA MODEL 603T-WI INSTALLATION INSTRUCTIONS
DEMA MODEL 603T-WI I. PARTS: A. Select-O-Matic Assembly B. 2 Pcs. Foot Strainers & 1/4" ID Tubing C. 4 Pcs. Mounting Screws & Anchors D. 1 Pc. 100-15K Metering Tip Kit (603T Only) E. 1 Pc. Backflow Preventer
More informationSpray & Foam Dispenser Item #
Spray & Foam Dispenser Item #92364-00 Spray & Foam Dispenser Item #92364 Table of Contents Section Page 1. Spray & Foam Dispenser Description... 3 2. Spray & Foam Dispenser Installation... 4 3. Chemical
More informationDEMA 652 DUO-FEED INSTALLATION INSTRUCTIONS
I. PARTS: A. Dispenser assembly B. 1 pc. ½ in I.D. X 6 ft. vinyl outlet tubing C. 1 pc. 9/16 in. I.D. X 6 ft. vinyl outlet tubing. D. 2 pc. 3/8 in. O.D. X 8 ft. vinyl supply tubing, foot valve & ceramic
More informationHYPRO. ProFlo. Nozzle Bodies with Superior Durability and High Flow Rates
HYPRO ProFlo Nozzle Bodies with Superior Durability and High Flow Rates WWW.HYPROSPRAYTIPS.COM HYPRO ProFlo Wet boom clamp sizes: 1 2, 3 4, 1, 20mm, 22mm, 25mm Turret-indexing design for improved consistency
More informationDEMA BLEND CENTER MODELS: 633GAP INSTALLATION INSTRUCTIONS
The 633GAP Series Blend Center modular design lets you easily couple together any number of stations to create a system that meets your specific needs. Mix and match both high and low flow units for filling
More informationDEMA MODEL 693T FOAM STATION II INSTALLATION INSTRUCTION
1. PARTS CHECKLIST: 2. INSTALLATION: DEMA MODEL 93T FOAM STATION II ITEM DESCRIPTION QTY. A. Foam Station Assembly 1 B. ¼ ID Tubing & Foot Strainer 1 C. 3/ ID Tubing & Foot Strainer 1 D. Ceramic Weight
More informationCHEMICALS ONE-WASH ( ) fax (662) HYDROMINDERS HYDROMINDER TIP SELECTOR HYDROMINDERS
16 HYDROMINDERS HY511 HY572 HY564 HYDROMINDERS VOLUME MOUNTING BRACKET SIPHON HY506 Low Y N HY507 Low N N HY511 Low Y Y () HY5111* Low Y Y 4-5.6 HY525 Medium Y N HY530 Medium Y Y HY561 Medium Y N HY562
More informationDEMA Model 294D Spray Foam INSTALLATION INSTRUCTIONS
1. PARTS A. Foamer Assembly B. Plastic chemical supply tubing w/ foot valve and ceramic weight C. Metering tip kit D. Outlet hose 25 long (optional accessory) E. Shut-off valve (optional accessory) 2.
More informationRoll Length (Feet) 6300 Polyethylene Pipe
IRRIGATION Item # Description Tube Length Unit 6291 24" Per Aqua Turret Complete 6293 30" Per Set (comes with pre-cut 6295 36" Per tubing, brass insert & 6297 48" Per aqua turret) 6299 60" Per 6274 Aqua
More informationTABLE 1-1 GPM FLOW RATE PROPORTIONER, 1/4 I.D. TUBING Injection Rates For Viscosities Shown Metering Tip Color
Blend Safe II Dispensing System is a modular, locking dispensing system that allows user to dispense chemicals safely, control dispenser inventory and has the flexibility in the field to meet changing
More informationDEMA BLEND CENTER MODEL 681GAP-3 INSTALLATION INSTRUCTIONS
1. PARTS CHECKLIST: A. Blend Center Assembly B. Vinyl Supply Tubing with Foot Valve Assembly C. Ceramic Weight D. Vinyl Outlet Tubing E. Screw and Anchor Kit F. Label Card G. Metering Tip Kit 2. INSTALLATION:
More informationValve Accessories NEW! Wanner Engineering Inc
Valve Accessories NEW! Wanner Engineering Inc Back Pressure Valves Diaphragm Back Pressure Valves enhance the performance of precision metering systems by applying a continuous back pressure to the EPM
More informationPeroxiDraw Dispenser
The PeroxiDraw Dispensing System is a locking dispensing system that allows the user to dispense Green Earth Peroxide Cleaner for up to six different dilutions and applications safely and effectively.
More informationChem-Feed Installation Instructions
Chem-Feed Installation Instructions Model C-800, Noir Jr. Positive Displacement Injector Pump PT SARANA PRIMA ENGUNA Jl.Gunung Sahari Raya 84 C Jakarta Phn. 021 4200045 Fax. 021 4200483 www.spe.co.id 80000-211
More informationDEMA SINGLE-FEED MODEL: 651GAP& 651GAP-1 INSTALLATION INSTRUCTIONS
The Model 65GAP is designed to dispense one product into a kitchen sink with the turn of a ball valve. I. PARTS: ITEM DESCRIPTION QTY. A Dispenser Assembly B ½ ID X 6 Long Vinyl Outlet Tubing (For 4 GPM
More informationPounds Per Square Inch (PSI)
Nozzle Size Selection Chart Determine the nozzle size by the pressure washer s GPM @ PSI (gallons per minute @ a specific pounds per square inch). If the nozzle size is too small, your equipment can be
More informationRocket High Performance Injector. Single Barb. Dual Barb. B Series Injectors. C Series Injectors. Adjustable Water Flow
Rocket High Performance Injector The Rocket injector was designed to be the most versatile venture injector in the marketplace. A superior design that can handle any task you throw at it. Designed to be
More informationINSTALLATION INSTRUCTIONS DEMA BLEND CENTER MODEL B-GAP, T-GAP
1. PARTS: ITEM DESCRIPTION QTY. A. Blend Center Assembly 1 B. ¼ ID X 8 Long Vinyl Supply Tubing & Foot Valve Assembly 1 C. Ceramic Weight 1 D. ½ ID X 6 Long Vinyl Outlet Tubing (For 4 GPM Station Only)
More informationImproved Stainless Steel T-Bolt Clamps
Improved Stainless Steel T-Bolt Clamps Loop designed for rugged & reliable service Heavy-duty channel bridge with sides (saddle) welded to clamp for precise alignment when tensioned, creating a 360 seal
More informationINJECTION CHECK VALVE DISCHARGE TUBING SPACER, E.P.U
INJECTION CHECK VALVE DISCHARGE TUBING COUPLING NUT 4 FUNCTION VALVE SPACER, E.P.U PUMP HEAD RETURN LINE (PRESSURE RELIEF) METERING PUMP HOUSING SPEED KNOB STROKE KNOB SUCTION FITTING SUCTION TUBING WEIGHT
More informationDEMA SPRAY CLEAN MODELS: 244BC, 244BCE, 244BCP & 244BCT INSTALLATION INSTRUCTIONS
I. PARTS: A. Injector. B. Spray gun. C. Mounting screws and washers. D. Vinyl supply tubing, foot strainer & ceramic weight. E. Metering tip (specified size, model 244BCT only). II. INSTALLATION: (See
More informationNOTES: MADE IN THE U.S.A. U.S. PATENT No. 5,863,128. U.S. No. 3,852,076 AND INTERNATIONAL REGISTERED TRADEMARKS
NOTES: 1. MADE IN THE U.S.A. 2. U.S. PATENT No. 5,863,128 3. U.S. No. 3,852,76 AND INTERNATIONAL REGISTERED TRADEMARKS 4. MATERIAL: GLASS FILLED POLYPROPYLENE (PP) OR POLYVINYLIDENE FLUORIDE (PVDF) OR
More informationDistributed by: M&M Control Service, Inc
Metering Diaphragm Pumps by Blue-White Industries TM Series Built -In DFD Diaphragm Failure Detection (see page 7) Series F and V Variable Speed Positive Displacement Diaphragm Metering Pump ProSeries
More informationDEMA BLEND CENTER MODELS: 637GAP-1 and 637GAP-4 INSTALLATION INSTRUCTIONS
1. PARTS CHECKLIST: ITEM DESCRIPTION QTY. A. Blend Center Assembly 1 B. ¼ ID X 8 Long Vinyl Supply Tubing & Foot Valve Assembly 4 C. Ceramic Weight 1 D. ½ ID X 6 Long Vinyl Outlet Tubing (For 1 GPM Station
More informationInformation Sheet Polyethylene Tank Assemblies
Information Sheet Polyethylene Tank Assemblies No. 27421 10 Gallon Tank Assembly Ultraviolet resistant, yellow polyethylene tank. Molded recesses for mounting of any LMI Series A, J, or P pump. Convenient
More informationR10 & R10 Turbo. The R10 and R10 Turbo are part of the Nelson Rotator family of sprinklers. R10-11 U.S. & METRIC
R10 & R10 Turbo R10-11 U.S. & METRIC R5 R10 R10 Turbo R2000 R2000LP/WF 9-29 GPH 0.3-0.7 GPM 0.6-2.1 GPM 0.7-3.5 GPM 0.9-5.7 GPM 34-110 LPH 61-164 LPH 140-469 LPH 150-792 LPH 191-1295 LPH The R10 and R10
More informationPolymeric Fittings Low Pressure
INDEX PPS Nuts for Flat Bottom Fitting Details 59 PEEK Flangeless Nuts 62 Polyacetal Color Coded Flangeless Nuts 63 Polypropylene Flanged Fingertight Nuts 64 Unions 65 Bulkhead Unions 67 PEEK Tees, Crosses
More informationSeries PZ and PZi Pulse Metering Pumps
BULLETIN PZ-3 Series PZ and PZi Pulse Metering Pumps CHEMICAL PUMP CO., INC. US Patent #6,283,717 The Age of Intelligent Pumps Finally Arrives! TYPE PZ (manual) TYPE PZi4 (automatic) TYPE PZi8 Intelligent
More informationSINGLE-STAGE INJECTOR MODELS 200-3C, 200C, 201C, 202C, 203C, 204C, 206C, 208C
D E M A SINGLE-STAGE MODELS SINGLE-STAGE MODELS 1. PARTS A. Injector B. Backup washer (Models 204C & smaller). C. Ceramic Weight. D. Tubing 8 long w/ foot strainer. E. Three brass nozzle bushings Metering
More informationCALL GRIFFCO CHEMICAL PUMP ACCESSORIES
Griffco Valve Inc. 6010 N. Bailey Ave., Suite 1B Amherst, NY 14226 USA PH: +1 716 835-0891 FAX: +1 716 835-0893 CHEMICAL PUMP ACCESSORIES CALL 1-800 - GRIFFCO BACK PRESSURE VALVES Griffco M & G-Series
More informationPARTS LIST FOR WLP-40-0M10 WATER RECYCLING TREATMENT SYSTEM
PARTS LIST FOR WLP-40-0M10 WATER RECYCLING TREATMENT SYSTEM Copyright 2006, Mi-T-M Corporation 1 Congratulations on the purchase of your new Mi-T-M water treatment system! This parts listing has been complied
More informationPounds Per Square Inch (PSI)
Nozzle Size Selection Chart Determine the nozzle size by the pressure washer s GPM @ PSI (gallons per minute @ a specific pounds per square inch). If the nozzle size is too small, your equipment can be
More informationUSER MANUAL. 2.5 and 5 Gallon Chemical Transport Jug. English
USER MANUAL 2.5 and 5 Gallon Chemical Transport Jug English WARNING Read this manual completely and understand the unit before operating or servicing it. Always wear appropriate personal protective equipment
More informationAQUA-LAB AX, BX, TX. CHEMICAL DISPENSING SYSTEM User Manual REV A reva0717
AQUA-LAB AX, BX, TX CHEMICAL DISPENSING SYSTEM User Manual REV A 4000133 reva0717 Hydra-Flex, Hydra-Flex, Inc. 2017 Inc. 2017 TABLE OF CONTENTS Overview 1 Features 1 Specifications 1 Installation Instructions
More informationPool Miscellaneous & Accessories / Timers and Volleyball Pole Holders
Pool Miscellaneous & Accessories / Timers and Volleyball Pole Holders Timers and Kits for Above Ground Installations Part No. Description List (US $) PA060 Pump Timer with Stand - NEMA Cord (retail packaging)
More informationNDP-25 Specifications
NDP-25 Specifications Port Dimensions (46.2 GPM Max.) Intake & discharge connection: Polypropylene (PPG) Kynar (PVDF) Aluminum (ADC-12) Stainless Steel (316) Cast Iron Air inlet (incl. ball valve): Air
More informationPTFE PRESSURE REGULATOR
PTFE PRESSURE REGULATOR Our IPS PTFE Pressure Regulator is designed for use in high purity water and aggressive chemicals applications. Designed with a 100% virgin PTFE wetted flow path, the unit is ideal
More informationSeries PZ / PZi / PZiG
BULLETIN PZ- 8 Series PZ / PZi / Pulse Metering Pumps US Patent #6,283,717 The Power of Intelligent Pumps Expands! TYPE PZ (manual) TYPE PZi4 (automatic) TYPE PZi8 (programmable) Features MANUAL EXTERNAL
More informationAGRICULTURE HORTICULTURE GREENHOUSE
AGRICULTURE HORTICULTURE GREENHOUSE Fertilizer & Chemical injectors are water driven only, with no ( other energy required I n j e c t o r s A step up from Different Models Application Fertigation Water
More informationSeries C1 Electronic Metering Pump. Specification Sheet and Assembly Details Manual No : 1619, 1829 Rev. : G, D Rev. Date : 6/09, 10/2015
INJECTION CHECK VALVE COUPLING NUT DISCHARGE TUBING 4 FUNCTION VALVE PUMP HEAD SPACER, E.P.U. METERING PUMP HOUSING RETURN LINE (PRESSURE RELIEF) SPEED KNOB STROKE KNOB SUCTION FITTING SUCTION TUBING WEIGHT
More informationTHANK YOU FOR CHOOSING BATHERBOX GETTING STARTED WHAT S IN THE BOX? N. Northview Ave Sioux Falls, SD 57107
INSTRUCTION MANUAL THANK YOU FOR CHOOSING BATHERBOX You are on your way to creating an unmatched bathing experience both for you and the lucky animal. The BatherBox is designed to save you hours of time
More informationCHEMICAL PUMP ACCESSORIES
Griffco Valve Inc. 6010 N. Bailey Ave., Suite 1B Amherst, NY 14226 USA Phone: 1 716 835-0891 Fax: 1 716 835-0893 CHEMICAL PUMP ACCESSORIES CALL: 1 800 GRIFFCO BACK PRESSURE VALVES Griffco T & G-Series
More informationCM-2800-OMVC & CM-2804/3304-OMHC PARTS LIST
8650 Enterprise Drive, Peosta IA 52068 319-556-7484 / Fax 319-556-1235 CM-2800-OMVC & CM-2804/3304-OMHC PARTS LIST Vanguard Engine Oil Grade: Vanguard Engine Oil Capacity: Honda Engine Oil Grade: Honda
More informationDEMA Pro-Fill I Sink Dispenser
DEMA Pro-Fill I Sink Dispenser MODELS PF651GAP, PF651AG, PF651GAP-1M, & PF651AG-1M Overview The PRO-FILL I Sink Dispenser mixes water with a cleaning chemical and dispenses the solution into holding containers
More informationintroduction RV Series Sediment Strainers Product Data Sheet
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D4101-86 ASTM D2466 ASTM D2467 ASTM F439 ASTM D2464 ASTM F1498 ASTM F437 IPEX RV Sediment Strainers protect critical pipeline components by
More informationCentro-Matic Automated Lubrication Systems Grease Injectors
SL-33 For dispensing petroleum-based lubricants with a viscosity up to NLGI No. 2 (refer to Design Guide). May be combined in a circuit of Injectors SL-32, SL-V, SL-V XL, SL-1 and/or SL-11. Available in
More informationPIPES PRODUCT CATALOG 2018 V1.6
PIPES PRODUCT CATALOG 2018 V1.6 Products appearing in this catalogue may be covered by one or more of the following US Patent Nos. US7886775, US8220838 and other U.S. patents pending or corresponding issued
More informationGLYCOL FEED SYSTEMS OPERATION & MAINTENANCE MANUAL
GLYCOL FEED SYSTEMS OPERATION & MAINTENANCE MANUAL PLEASE RECORD THE FOLLOWING DATA (Information is located on the product label or packing slip) Model Number: Date Code: Installation Date: Installation
More informationCorrosion Resistant and Ultra-Pure Rotameters for Accurate Measurement of Liquids and Gases
Corrosion Resistant and Ultra-Pure Rotameters for Accurate Measurement of Liquids and Gases Rotameters Markets/Applications George Fischer rotameters are ideally suited for a multitude of corrosive and
More informationCHEM-FEED. Engineered Skid Systems. ProSeries. by Blue-White Ind.
CHEM-FEED Engineered Skid Systems R Single pump model number CFS-1AA-AAAAAA Shown with Chem-Pro C2 pump, sold separately Dual pump model number CFS-2AA-AAAAAA Shown with Flex-Pro A3 pump, sold separately
More informationPROMAX INSTRUCTION MANUAL
PROMAX INSTRUCTION MANUAL One Hand Activation Single Product [1 gpm (4l/m) models only] One Hand Activation 4 Product [1 gpm (4l/m) models only] Button Activation Single Product [1, 4, 8 gpm (4, 16, 30
More informationProMax QuickJet Spray Nozzles. For trouble-free performance and fast maintenance. Experts in Spray Technology. Spray Nozzles.
Experts in Technology Nozzles Control Analysis Fabrication ProMax QuickJet Nozzles For trouble-free performance and fast maintenance Overview Quick-change spray technology ensures trouble-free performance
More informationLow Pressure Series - Accessories. High Pressure Series - Accessories
Low Pressure Series - Accessories STCO 50 Low Pressure Variable Spray Gun - Bronze Max. Pressure: 0Bar(50PSI) Inlet: /2 FBSP Max. Flow: 6GPM(23Lt/Min) 60 C(40 F) STCO 50-SS Low Pressure Variable Spray
More informationMur-lok. Mur-lok Polypropylene Quick-Connect Fittings & Valves. Check Valves. Fixed NPTF 90 Elbows. Check Valve Elbow. Swivel NPTF 90 Elbows
Polypropylene Quick-Connect Fittings & Valves Polypropylene Quick-Connect Fittings & Valves G.A. Murdock offers the largest selection of polypropylene quick-connect fittings and valves on the market. These
More information463 Arag High Pressure Controls OM
Owner's Manual 463 Arag High Pressure Controls OM PBZ LLC 295 Wood Corner Rd Lititz PA 17543 www.cropcareequipment.com (717) 738-7365 A Paul B Zimmerman Inc. Company Form: 463AragHPCOM Rev. Date 03/14
More informationDEMA Pro-Fill II Sink Dispenser
DEMA Pro-Fill II Sink Dispenser MODELS PF652GAP, PF652AG, PF652GAP-2M, & PF652AG-2M Overview The PRO-FILL II Sink Dispenser mixes water with cleaning chemicals and dispenses these solutions. This unit
More informationAir Powered Double Diaphragm Pumps. Polypropylene Pumps. Made In Japan
Air Powered Double Diaphragm Pumps 2016 Polypropylene Pumps Made In Japan Presenting YTS Double Diaphragm Pumps Made In Japan Non-Lubricated Design High Flow Rates Efficient Air Consumption Easy & Fast
More informationEXCEL EXCEL XR DATA SHEET. Metering Pump. Manual, Enhanced, and Communications Models. Applications. Performance Specifications. Features and Benefits
EXCEL XR Metering Pump EXCEL XR Manual, Enhanced, and Communications Models The EXCEL XR metering pump is a mechanically actuated diaphragm pump driven by advanced variable speed technology to provide
More informationSeries C9 Electronic Metering Pump. Specification Sheet and Assembly Details Manual No : 1619, 1795 Rev. : G, E Rev. Date : 6/09, 10/2015
INJECTION CHECK VALVE COUPLING NUT DISCHARGE TUBING 4 FUNCTION VALVE PUMP HEAD SPACER, E.P.U. METERING PUMP HOUSING RETURN LINE (PRESSURE RELIEF) SPEED KNOB STROKE KNOB SUCTION FITTING SUCTION TUBING WEIGHT
More informationProMinent. ProMinent D4a Metering Pumps with built-in proportional controllers
D4a Metering Pumps with built-in proportional controllers A series of solenoid-driven metering pumps with built-in ph controller, oxidation-reduction potential (Redox) controller or chlorine controller.
More informationVEHICLE WASH CATALOG VOLUME
VEHICLE WASH CATALOG VOLUME 3 www.hydraflexinc.com 952-808-3640 952-808-3640 www.hydraflexinc.com 53 INDEX ABOUT US CHEMICAL DISPENSING SYSTEMS Aqua-Lab System Benefits Next Generation Features Aqua-Lab
More informationQuick Reference Performance Guide
Quick Reference Performance Guide Micro-Quick Sprays LFX Low Flow Sprinklers LF Series Sprinklers Irrigation products needed for each stage of a field s development. With a legacy rooted in agriculture,
More informationSpreader and Vehicle Battery Kits
May 5, 20 Lit. No. 922, Rev. 04 and Vehicle Battery Kits Hopper s Parts List and Installation Instructions CAUTION Read this document before installing the and Vehicle Battery Kit. CAUTION Use standard
More informationGRUNDFOS PRODUCT GUIDE DMH. Dosing pumps
GRUNDFOS PRODUCT GUIDE Dosing pumps Contents Features and benefits 3 Performance range 4 Pump selection options 36 Pumped liquids List of pumped liquids 39 Identification Type key 7 Functions Functional
More informationCentro-Matic Automated Lubrication Systems Grease Injectors
Series SL-33 For dispensing petroleum-based lubricants with a viscosity up to NLGI No. 2 (refer to Design Guide). May be combined in a circuit of Injectors SL-32, SL-V, SL-V XL, SL-1 and/or SL-11. Available
More informationProMinent EXtronic Solenoid Diaphragm Metering Pumps
Overview: EXtronic Ideal for explosion-proof applications (see page 126 for spare parts) The ProMinent EXtronic series represents a proven technology for metering liquid media in hazardous areas classified
More informationSeries PZ and PZi Pulse Metering Pumps
BULLETIN PZ-03 Series PZ and PZi Pulse Metering Pumps CHEMICAL PUMP CO., INC. US Patent #6,283,717 The Age of Intelligent Pumps Finally Arrives! TYPE PZ (manual) TYPE PZi4 (automatic) TYPE PZi8 Intelligent
More informationSupply Tubing TUBING TUBING
Supply Tubing Micro Distribution Tubing...25 Bubbler & Nursery Tubing...27 IPS Flex Risers and Irrigation Hose...28 Black Steel Tubing...29 Polyethylene Supply Tubing...30 Oval and Layflat Hose...32 23
More informationPneumatic Metering Pump II 3 12 l/h
Works without electrical current Mechanical stroke adjustment Space-saving design Separate air bleeding High reliability due to teflon compound diaphragm Optional with integrated solenoid valve Pneumatic
More informationProMinent Beta Solenoid Diaphragm Metering Pumps
Overview: Beta Ideal for basic chemical feed applications (see page 127 for spare parts, page 138 for accessory kits and page 138 for control cables) ProMinent pk_1_004_1 Capacity range 0.2-8.4 gph, 232-29
More informationDIGIFLO ELECTRONIC FLOWMETER
DIGIFLO ELECTRONIC FLOWMETER PIPE FITTING INSTALLATION MANUAL SADDLE MACHINED IN-LINE BODY MOLDED IN-LINE BODY MOLDED TEE Blue-White R Industries, Ltd. F-2000 Page 2 1.0 Temperature vs. Pressure Temperature
More informationHusky 3275 Aluminum Pumps Air-Operated Double-Diaphragm
Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm Features or bspt is externally serviceable Typical Applications Husky 3275 Aluminum DK3XXX Typical Fluids Handled 50 PROCESS EQUIPMENT CATALOG Husky
More informationVALVES std $ fp $ fp $
std = standard port POLY BOLTED STAINLESS STEEL BOLTS, NUTS & WASHERS fp = full port Code No. Part No. Size Price 5143361 60540 1/2 fp $ 29.29 5143362 60541 3/4 fp $ 29.29 5143363 60542 1 std $ 29.29 5143364
More informationParts Guide PRODUCT NAME. Ecolab Cleaning Caddy Water System 2. Ecolab Cleaning Caddy. Ecolab Cleaning Caddy Electrical 4
Ecolab Cleaning Caddy Parts Guide Ecolab Cleaning Caddy Water System 2 Ecolab Cleaning Caddy Ecolab Cleaning Caddy Electrical 4 PRODUCT NAME PART # PRICE Ecolab Cleaning Caddy Miscellaneous 5 Cleaning
More informationIndustrial Electrical Solutions
A. Electrical Spiral Wrap Steel Harness multiple cables into a single manageable bundle Allows breakouts of single/multiple cables Provides abrasion protection for wire, cables, hoses, and tubing Reverse
More information