KIT CR-4 3/4" MALE STRAIGHT THREAD NOTES: MADE IN THE U.S.A. U.S. PATENT No. 5,863,128. U.S. No. 3,852,076 AND INTERNATIONAL REGISTERED TRADEMARKS
|
|
|
- Ferdinand Harvey
- 6 years ago
- Views:
Transcription
1 NOTES: 1. MADE IN THE U.S.A. 2. U.S. PATENT No. 5,863, U.S. No. 3,852,76 AND INTERNATIONAL REGISTERED TRADEMARKS MATERIAL: GLASS FILLED POLYPROPYLENE (PP) OR POLYVINYLIDENE FLUORIDE (PVDF) OR NATURAL POLYVINYLIDENE FLUORIDE (N-PVDF)OR ETHYLENE CHLOROTRIFLUOROETHYLENE (ECTFE). INLET/OUTLET CONNECTION: 1-1/2" MNPT OR BSPT SUCTION PORT CONNECTION: DEFAULT - 1/2" I.D. TUBING BARB WITH INTEGRATED CHECK VALVE ALTERNATE - 1/2" MNPT - SEE ALTERNATE CAP MODIFICATION DETAIL FOR INSTALLATION RECOMMENDATIONS REFER TO MAZZEI TECHNICAL BULLETINS No. 4, No. 5, No. 6, No. 1 AND No. 11, WHICH CAN BE FOUND AT SEAL RING (KIT CR4) BALL (KIT CR4) SPRING (KIT CR4) 3/4" MALE STRAIGHT THREAD KIT CR-4 1/2" TUBING BARBS (DEFAULT CONNECTION) 1/2" MNPT (ALTERNATE CONNECTION) INJECTOR CAP 8. MAZZEI INJECTOR CO., LLC. 5 ROOSTER DR. BAKERSFIELD, CA 9337 TEL: WEB: REMOVE HOSE BARBS FROM CAP AND DISCARD 3mm.13in MAXIMUM STICKOUT 1-1/2" MNPT OR BSPT (TYPICAL) INJECTOR BODY MAZZEI PART NO.'s 1583-A PP 1583-A PVDF 1583-A N-PVDF 1583-A ECTFE ISO 1583A GRPP ISO 1583A PVDF ISO 1583 ECTFE KIT CR-4 TITLE MATERIAL BALL TEFLON (PTFE) SEAL RING KEL-F (PCTFE) SPRING HASTELLOY C-22 "CAP MODIFICATION DETAIL" (ALTERNATE) UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES DRAWN: G. NOVINS DATE: 7/23/214 SIZE: APPROVED: T. JOHNS A TITLE: 1-1/2" INJECTOR; MODEL 1583-A DRAWING NO.: 1583-A WEIGHT: SCALE: REV.: SHEET: N/A 1:3 B 1 OF 2
2 (ISOMETRIC VIEW) (FOR REFERENCE ONLY) 279mm 11.in 48mm 1.9in 14mm 5.5in SUCTION PORT 86mm 3.39in 11mm 4.35in INLET MODEL NO. LOCATION (OPPPOSITE SIDE) FLOW OUTLET 48mm 1.9in (ACROSS FLATS) UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TITLE: 1-1/2" INJECTOR; MODEL 1583-A DRAWN: G. NOVINS DATE: 7/23/214 SIZE: APPROVED: T. JOHNS A DRAWING NO.: 1583-A WEIGHT: SCALE: REV.: SHEET: N/A 1:3 B 2 OF 2
3 NOTES: 1. MADE IN THE U.S.A. 2. U.S. PATENT No. 5,863, U.S. No. 3,852,76 AND INTERNATIONAL REGISTERED TRADEMARKS MATERIAL: ETHYLENE CHLOROTRIFLUOROETHYLENE (ECTFE). INLET/OUTLET CONNECTION: 1-1/2" SANITARY FERRULE SUCTION PORT CONNECTION: DEFAULT - 1/2" I.D. TUBING BARB WITH INTEGRATED CHECK VALVE ALTERNATE - 1/2" MNPT - SEE ALTERNATE CAP MODIFICATION DETAIL FOR INSTALLATION RECOMMENDATIONS REFER TO MAZZEI TECHNICAL BULLETINS No. 4, No. 5, No. 6, No. 1 AND No. 11, WHICH CAN BE FOUND AT SEAL RING (KIT CR4) BALL (KIT CR4) SPRING (KIT CR4) 3/4" MALE STRAIGHT THREAD KIT CR-4 1/2" TUBING BARBS (DEFAULT CONNECTION) 1/2" MNPT (ALTERNATE CONNECTION) INJECTOR CAP 8. MAZZEI INJECTOR CO., LLC. 5 ROOSTER DR. BAKERSFIELD, CA 9337 TEL: WEB: REMOVE HOSE BARBS FROM CAP AND DISCARD 1-1/2 SANITARY FERRULE (TYPICAL) INJECTOR BODY MAZZEI PART NO.'s 1583-TC ECTFE KIT CR-4 TITLE MATERIAL BALL TEFLON (PTFE) SEAL RING KEL-F (PCTFE) SPRING HASTELLOY C-22 3mm.13in MAXIMUM STICKOUT "CAP MODIFICATION DETAIL" (ALTERNATE) UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES DRAWN: G. NOVINS DATE: 7/23/214 SIZE: APPROVED: T. JOHNS A TITLE: 1-1/2" INJECTOR; MODEL 1583-TC DRAWING NO.: 1583-TC WEIGHT: SCALE: REV.: SHEET: N/A 1:3 B 1 OF 2
4 (ISOMETRIC VIEW) (FOR REFERENCE ONLY) 279mm 11.in 51mm 2.2in 14mm 5.5in SUCTION PORT 86mm 3.38in 111mm 4.39in INLET MODEL NO. LOCATION (OPPOSITE SIDE) FLOW OUTLET UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TITLE: 1-1/2" INJECTOR; MODEL 1583-TC DRAWN: G. NOVINS DATE: 7/23/214 SIZE: APPROVED: T. JOHNS A DRAWING NO.: 1583-TC WEIGHT: SCALE: REV.: SHEET: N/A 1:3 B 2 OF 2
5
6
7
8
9 Operating Pressure PSIG INLET OUTLET WATER SUCTION Motive Flow GPM Water Suction GPH *(37.5) *(41.9) 4.4 Copyright 214 REV 214 Mazzei Company, LLC 5 Rooster Drive, Bakersfield, CA USA TELFAX Operating Pressure PSIG INLET OUTLET WATER SUCTION Motive Flow GPM Water Suction GPH *(4.4) *(49.4) *(8.6) *(13.) *(56.7) *(17.9) *(22.1) *(7.1) *(26.) *(29.4) *(73.1) *(33.4) *(81.3) *NUMBERS IN PARENTHESIS indicate the injector outlet pressure when suction stops (Zero Suction Point). Water Suction Capacity Performance Table Model 1583
10 Operating Pressure WATER SUCTION Operating Pressure kg/cm 2 kg/cm 2 Inlet Outlet Motive Flow l/min Water Suction l/hr *(2.64) *(2.95) 153 Copyright 214 REV 214 Mazzei Company, LLC 5 Rooster Drive, Bakersfield, CA USA TELFAX Inlet Outlet WATER SUCTION Motive Flow l/min Water Suction l/hr *(.31) *(3.47) *(.61) *(.91) *(3.99) *(1.26) *(1.55) *(4.92) *(1.83) *(2.7) *(5.14) *(2.35) *(5.72) *NUMBERS IN PARENTHESIS indicate the injector outlet pressure when suction stops (Zero Suction Point). Water Suction Capacity - METRIC Performance Table Model 1583
11 Operating Pressure PSIG AIR SUCTION Operating Pressure PSIG AIR SUCTION Motive Air Motive Air Flow Suction Flow Suction INLET OUTLET INLET OUTLET GPM SCFH GPM SCFH *(4.4) *(49.4) *(8.6) *(13.) *(56.7) *(17.9) *(22.1) *(7.1) *(26.) *(29.4) *(73.1) *(33.4) *(81.3) *(37.5) *(41.9) Copyright 214 REV *(98.4) Mazzei Company, LLC 5 Rooster Drive, Bakersfield, CA USA TELFAX *NUMBERS IN PARENTHESIS indicate the injector outlet pressure when suction stops (Zero Suction Point). Air Suction Capacity Performance Table Model 1583
12 Operating Pressure Operating Pressure AIR SUCTION kg/cm 2 kg/cm 2 AIR SUCTION Motive Air Motive Air Flow Suction Flow Suction INLET OUTLET INLET OUTLET l/min l/min l/min l/min *(.31) *(3.47) *(.61) *(.91) *(3.99) *(1.26) *(1.55) *(4.92) *(1.83) *(2.7) *(5.14) *(2.35) *(5.72) *(2.64) *(2.95) Copyright 214 REV *(6.92) Mazzei Company, LLC 5 Rooster Drive, Bakersfield, CA USA TELFAX *NUMBERS IN PARENTHESIS indicate the injector outlet pressure when suction stops (Zero Suction Point). Air Suction Capacity - METRIC Performance Table Model 1583
KIT CR-4. 3mm.13in UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES NOTES: MADE IN THE U.S.A. U.S. PATENT No. 5,863,128
NOTES: 1. MADE IN THE U.S.A. 2. U.S. PATENT No. 5,863,128 3. 4. 5. 6. U.S. No. 3,852,76 AND INTERNATIONAL REGISTERED TRADEMARKS MATERIAL: GLASS FILLED POLYPROPYLENE (PP) OR POLYVINYLIDENE FLUORIDE (PVDF)
SEAL RING (KIT CR4) BALL (KIT CR4) SPRING (KIT CR4) 3/4" MALE STRAIGHT THREAD
NOTES: 1. MADE IN THE U.S.A. 1/2" TUBING BARBS (DEFAULT CONNECTION) 2. 3. 4. 5. 6. U.S. PATENT No. 5,863,128 U.S. No. 3,852,076 AND INTERNATIONAL REGISTERED TRADEMARKS MATERIAL: GLASS FILLED POLYPROPYLENE
NOTES: MADE IN THE U.S.A. U.S. PATENT No. 5,863,128. U.S. No. 3,852,076 AND INTERNATIONAL REGISTERED TRADEMARKS
NOTES: 1. MADE IN THE U.S.A. 2. U.S. PATENT No. 5,863,128 3. U.S. No. 3,852,76 AND INTERNATIONAL REGISTERED TRADEMARKS 4. MATERIAL: GLASS FILLED POLYPROPYLENE (PP) OR POLYVINYLIDENE FLUORIDE (PVDF) OR
Fertigation. Injectors AirJection Injectors Suction and Bypass Kits Parts & Accessories FERTIGATION FERTIGATION
Fertigation Injectors...207 AirJection Injectors...209 Suction and Bypass Kits...210 Parts & Accessories...211 205 206 Injectors Injector Product Range - Models and Kit Assemblies Injector Model Numbers
PRODUCT CATALOG Agriculture
PRODUCT CATALOG Agriculture World Leader in Mixing and Contacting Technologies Differential Pressure Injectors for Fertilization and Other Chemical Applications Product Warranty PERIOD OF WARRANTY. Subject
USE OF MAZZEI INJECTORS IN PRESSURIZED SPRINKLER APPLICATIONS
USE OF MAZZEI INJECTORS IN PRESSURIZED SPRINKLER APPLICATIONS The selection, installation and use of Mazzei Injectors in pressurized sprinkler systems are simple and straightforward. There are several
Models: D-03, G-03, G-13 and M-03
Parts Manual D03-991-2402C Models: D-03, G-03, G-13 and M-03 Kel-Cell and Standard Versions IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date
D 40 ALUMINIUM (CLAMPED)
www.tablapump.com A COMPLETE RANGE OF AIR DIAPHRAGM PUMPS CONGRATULATIONS ON PURCHASING YOUR NEW TABLA PUMP! IMPORTANT: Please read all the installation and safety information carefully before you start
D 25 POLYPROPYLENE (BOLTED)
www.tablapump.com A COMPLETE RANGE OF AIR DIAPHRAGM PUMPS CONGRATULATIONS ON PURCHASING YOUR NEW TABLA PUMP! IMPORTANT: Please read all the installation and safety information carefully before you start
ProMinent delta Solenoid Diaphragm Metering Pumps
Overview: delta Ideal for applications requiring metering pump accuracy with minimal pulsation (see page 127 for spare parts and page 134 for control cables) Continuous or pulsating dosing Configurable
F20 Series. Maximum Flow Rate: 1.0 gpm (3.8 l/min) Maximum Pressure: 1500 psi (103 bar) for Metallic Pump Heads
F2 Series Maximum Flow Rate: 1. gpm (3.8 l/min) Maximum Pressure: 15 psi (13 bar) for Metallic Pump Heads F2 Series Performance Capacities Max. Max. Flow Input @ 1 psi (69 bar) Model rpm gpm l/min F2-E
Air Inlet/ Discharge Port
Metering Pumps The ProMinent is a pneumatically-actuated metering pump with a capacity in the 0.1 to 3.9 gph (0.24 to 14.8 l/h) range at maximum backpressures of 21 to 232 psig (0.9 to 16 bar). The consists
Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm
Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm Features or bspt is externally serviceable Typical Applications Husky 3275 Aluminum DK3XXX Typical Fluids Handled 50 PROCESS EQUIPMENT CATALOG Husky
PTFE PRESSURE REGULATOR
PTFE PRESSURE REGULATOR Our IPS PTFE Pressure Regulator is designed for use in high purity water and aggressive chemicals applications. Designed with a 100% virgin PTFE wetted flow path, the unit is ideal
Ultra Proline. ECTFE (Halar ) Single Wall Piping System
ECTFE ( ) Single Wall Piping System 222 - Specification Natural Ethylene Chlorotrifluoroethylene (ECTFE) Chemical Piping System REV:IN0512HA Materials: ASTM D3275 Class 2 resin. Raw resins are certified
I n j e c t o r s. Different Models. Applications Fertigation Chlorination and acidification Water additives ph and EC control
Fertilizer & Chemical proportional water driven injectors, with no ( other energy required I n j e c t o r s A step up from Different Models Applications Fertigation Chlorination and acidification Water
GRUNDFOS PRODUCT GUIDE DMH. Dosing pumps
GRUNDFOS PRODUCT GUIDE Dosing pumps Contents Features and benefits 3 Performance range 4 Pump selection options 36 Pumped liquids List of pumped liquids 39 Identification Type key 7 Functions Functional
pump selection guide PONNDORF PX single series PDX single series PD/2 dual series PK series
pump selection guide Pump Pump Max flow rate Dry Lubricated Three Compression Special series m 3 /hr (GPM) running bath roller shoe features Page(s) PX single 12.5 (55) Molded tubing with rib 38-39 and
T Series Pump Guide WEBSTER PUMPS
T Series Pump Guide WEBSTER PUMPS 12 Q U A L I T Y S E R V I C E I N T E G R I T Y T Series Vertical Seal-less Immersible Pump 1/3, 1/2, 3/4, 1, 1-1/2 Hp The new T Series Webster by Hayward thermoplastic
For a quote, call us ADVANTAGES OF SERIESLOCK INCLUDE:
SLDATA-0319 Patents Pending SeriesLock, a new innovative fluid coupler, allows a larger volume of fluid to pass through it at lower line pressures. ADVANTAGES OF SERIESLOCK INCLUDE: Spring-Free Flow Path
INJECTION CHECK VALVE DISCHARGE TUBING SPACER, E.P.U
INJECTION CHECK VALVE DISCHARGE TUBING COUPLING NUT 4 FUNCTION VALVE SPACER, E.P.U PUMP HEAD RETURN LINE (PRESSURE RELIEF) METERING PUMP HOUSING SPEED KNOB STROKE KNOB SUCTION FITTING SUCTION TUBING WEIGHT
Model 6330 COSASCO Retractable System Injection/Sampling Tube Assemblies
Model 6330 COSASCO Retractable System Injection/Sampling Tube Assemblies Order Length A Dimension Inches mm 18 24.54 623 24 30.54 775 30 36.54 928 36 42.54 1080 Specifications: Pressure Rating 1500 PSI
ProMinent Hydro Hydraulic Diaphragm Metering Pumps
ProMinent Hydro Hydraulic Diaphragm Metering Pumps ProMinent Hydro Hydraulic Diaphragm Metering Pumps NEW hydraulic motor driven metering pumps provide precise and safe metering for high pressure applications.
G66 Series API bar (250 psi) for Non-metallic Pump Heads. G66 with Ductile Iron pump head. G66 with Polypropylene pump head.
G66 Series Maximum Flow Rate: Maximum Pressure: 248.7 l/min (65.7 gpm) 48 bar (7 psi) for Metallic Pump Heads 17 bar (25 psi) for Non-metallic Pump Heads API 674 ATEX G66 with Ductile Iron pump head www.hydra-cell.eu
103 bar (1500 psi) for Metallic Pump Heads
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 13 bar (15 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Brass pump head G35
AGRICULTURE GREENHOUSE LANDSCAPE
AGRICULTURE GREENHOUSE LANDSCAPE Fertilizer & Chemical proportional water driven injectors, with no ( other energy required I n j e c t o r s A step up from Different Models Applications Fertigation Chlorination
G03 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G03 Shaft-driven with Stainless Steel pump head
G03 Series Maximum Flow Rate: Maximum Pressure: 11.7 l/min (3.1 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G03 Shaft-driven with Stainless Steel pump
CORROSION & CHEMICAL RESISTANT VALVES AND ACTUATORS
CORROSION & CHEMICAL RESISTANT VALVES AND ACTUATORS OFFERING YOU ADVANCED TECHNOLOGY, HIGH STANDARD OF QUALITY AND THE GUARANTEE OF A LEADING MANUFACTURER FOR A CUSTOM DESIGNED SOLUTION TO YOUR CORROSIVE
M03 Series. Maximum Flow Rate: 3.1 gpm (11.7 l/min) Maximum Pressure: 1200 psi (83 bar) for Metallic Pump Heads
M3 eries Maximum Flow Rate: 3.1 gpm (11.7 l/min) Maximum Pressure: 12 psi (83 bar) for Metallic Pump Heads M3 eries Performance Capacities Max. Max. Flow Input @ 1 psi (69 bar) Maximum Inlet Pressure Model
G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G1 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 13 bar (15 psi) for Metallic Pump Heads 24 bar (35 psi) for Non-metallic Pump Heads API 674 ATEX G1 with Cast Iron pump head G1 with
High Pressure Ball Valves
High Pressure Ball Valves 79 Valve Options Reliable, simple, operation for on-off service Fast acting, one quarter turn fully opens or closes the valve Maximum performance, straight through flow for minimum
F-SERIES FDA AIR DIAPHRAGM PUMPS
F-SERIES FDA AIR DIAPHRAGM PUMPS FDA AIR DIAPHRAGM PUMPS DIMENSION FDA PUMPS FDA Grade Elastomers Electropolished and Passivated Stainless Steel Wet End Parts Oversized Tri-Clamp Connection Standard Limited
Materials: Parts of the pump in contact with the liquid are manufactured from the following standard
Plastic Centrifugal Pump For Chemical Process DIN EN 22858 (ISO 2858)Standard DESCRIPTION pumps are manufactured to DIN EN 22858 (ISO 2858) standards in respect of design, performance and dimensions. They
120 SERIES ONE PIECE TYPE
120 SERIES ONE PIECE TYPE SBV 120H Series Features Simple design with one piece body Tight and smooth, low torque and easy operation One-piece ball stem Panel mountable Variety of End Connections Straight,
Type 459. Type 459. Available designs. Cap H2. with bushing 19. Lock nut. Bonnet. Outlet flange 2.4 Outlet adaptor 2.1. spacer.
Available designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring plate 14 Split ring 60 Gasket 8 Guide 57 Pin 61 Ball 7 Disc 2 Outlet body
DIGIFLO ELECTRONIC FLOWMETER
DIGIFLO ELECTRONIC FLOWMETER PIPE FITTING INSTALLATION MANUAL SADDLE MACHINED IN-LINE BODY MOLDED IN-LINE BODY MOLDED TEE Blue-White R Industries, Ltd. F-2000 Page 2 1.0 Temperature vs. Pressure Temperature
450FB and 460FB Flow Back Manifolds
450FB and 460FB Flow Back Manifolds The 450FB and 460FB flow back valves allow pressure from the boom lines to be relieved back to the tank when the valve is switched to the off position. Available with
MODELS: G-20, G-21, G-22
PARTS MANUAL G20-991-2402A IMPORTANT Record your pump model number and serial number here for easy reference: Model No. MODELS: G-20, G-21, G-22 Serial No. Date of Purchase When ordering parts or making
D/G-04 Series. Up to 3.0 gpm (11.3 l/min)
D/G-4 Series Up to 3. gpm (11.3 l/min) 42 United States Instant Information: United Kingdom D/G-4 Series Performance flow max max flow input model gpm l/min rpm D/G-4-X 2.9 11. 175 D/G-4-E 2.1 7.8 175
Models: D-12, G-12. Parts Manual D D WANNER ENGINEERING, INC.
Parts Manual D12-991-2402D Models: D-12, G-12 IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering parts or making inquiries
Models: D-03, G-03, G-13, M-03 and M-23 Mono-Block Kel-Cell Versions
Parts Manual D03-991-2406 Models: D-03, G-03, G-13, M-03 and M-23 Mono-Block Kel-Cell Versions IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date
G35 Series API bar (1500 psi) for Metallic Pump Heads. G35 with Stainless Steel pump head and SAE flanges. G35 with Brass pump head
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 103 bar (1500 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Cast Iron pump head
Type 437. Type 437. Available designs. Cap H2 Adjusting screw with bushing. Axial needle 69 beering. Lock nut. Spring plate. Spring plate. Pin.
Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut Axial needle 69 beering 16 Spring plate 12 Spindle 54 Spring 2 Outlet body 17 Spring plate 57 Pin 61 Ball 7 Disc 1 Body Threaded
D/G-12 Series. Up to 8 gpm (30.3 l/min)
D/G-12 Series Up to 8 gpm (3.3 l/min) D/G-12 Vertical Applications The D/G-12 is specifically designed for vertical pumping installations such as machine tool cooling applications. D/G-12 shown with Hydra-Cell
ProMinent Beta Solenoid Diaphragm Metering Pumps
Overview: Beta Ideal for basic chemical feed applications (see page 127 for spare parts, page 138 for accessory kits and page 138 for control cables) ProMinent pk_1_004_1 Capacity range 0.2-8.4 gph, 232-29
Series C1 Electronic Metering Pump. Specification Sheet and Assembly Details Manual No : 1619, 1829 Rev. : G, D Rev. Date : 6/09, 10/2015
INJECTION CHECK VALVE COUPLING NUT DISCHARGE TUBING 4 FUNCTION VALVE PUMP HEAD SPACER, E.P.U. METERING PUMP HOUSING RETURN LINE (PRESSURE RELIEF) SPEED KNOB STROKE KNOB SUCTION FITTING SUCTION TUBING WEIGHT
Single, oversized roller compresses a low friction hose through a full 360-degrees of rotation
Graco EP Series Peristaltic Hose Pump Technology Single, oversized roller compresses a low friction hose through a full 360-degrees of rotation More flow per revolution than conventional designs Inexpensive
Inline Adapters are Electro Polished to 10 Ra Max. 2 Valves supplied with Metal to Metal Face Seal connections have
CRYOGENIC RELIEF VALVE (STAINLESS) 1/4" and 1/2" NPT -4 and -8 Metal To Metal Face Seal 1/4" and 1/2" Bi-Lok Dual Ferrule Tube 10-750 Psig (0.69-51.7 Bar) STAINLESSCRV Description The Generant Series Stainless
G25 Series API bar (350 psi) for Non-metallic Pump Heads. G25 with Cast Iron pump head
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
5100 Series Inline Relief Valve 10 to 2,400 PSIG
Fred C. Gilbert Co. 106 Norris Road Bakersfield, Ca. 93308 661-399-9569 fax 661-393-9654 5100 Series Inline Relief Valve 10 to 2,400 PSIG Features Zero Leakage to 95% of Cracking Pressure Positive Reseal
Low Pressure Series - Accessories. High Pressure Series - Accessories
Low Pressure Series - Accessories STCO 50 Low Pressure Variable Spray Gun - Bronze Max. Pressure: 0Bar(50PSI) Inlet: /2 FBSP Max. Flow: 6GPM(23Lt/Min) 60 C(40 F) STCO 50-SS Low Pressure Variable Spray
Item Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L
Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection
Fluid Dispensing Systems
Fluid Dispensing Systems Automotive Commercial Industrial Diesel Exhaust Fluid (DEF) Open Systems Drum and Tote Packages Lever Pump System EPDM seals for maximum chemical compatibility. Includes 1300-028
instrumentation ball valves
7G Series 2 and 3-way Ball Valves Multi-directional Flow HOKE Inc. 405 Centura Court PO Box 4866 (29305) Spartanburg, SC 29303 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com sales@hoke.com instrumentation
BULLETIN 340B. Sethco FLOWS TO 275 GPM. Seal-less, End Suction Magnetic Drive Centrifugal Pumps. For Corrosive Liquid and Chemical Transfer
BULLETIN 340B FLOWS TO 275 GPM Sethco Seal-less, End Suction Magnetic Drive Centrifugal Pumps For Corrosive Liquid and Chemical Transfer SETHCO END SUCTION CORROSION RESISTANT MAGNETIC DRIVE, SEAL-LESS
Identity code: Meta MTMa Diaphragm Metering Pumps Series: Meta diaphragm-type metering pump Version a
Identity code: Meta MTMa Diaphragm Metering Pumps MTMa Series: Meta diaphragm-type metering pump Version a H A Main drive Add-on drive Pump version: New Cross Reference Conversion Table from former version
G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
1350 Valves. 1 of 14. Jun Illustrated Parts Breakdown Agilent 6890 Gas Chromatograph Service Manual
This section contains illustrated parts breakdowns for the following 6890 GC valves and related components: Valve Box Assembly Valve Driver Assembly Valve Actuator Assembly Valco W-series Minivalve Nickel
Pulsation Dampeners (Chargeable-Adjustable)
ACCU-PULSE (Chargeable-Adjustable) Canadian 2018 List 01/18 Rev. 6 TABLE OF CONTENTS Page Page 2 Dampener Sizing Guide 7 ACCU-PULSE Series III (370cu in) 3 ACCU-PULSE Series I (10cu in) 8 ACCU-PULSE Series
ANDERSON GREENWOOD. Hand Valves and Accessories INSTRUMENTATION PRODUCTS. Soft Seated Valves Hard Seated Valves Mini Valves
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Hand Valves and Accessories Soft Seated Valves Hard Seated Valves Mini Valves Anderson Greenwood is the industry leader in instrument valve technology and the
ANDERSON GREENWOOD H7/H71 HAND VALVES
3 /16 (4.8 mm) orifice hard-seated hand valves for pressures to 6000 and 10000 psig (414 and 689 barg) FEATURES H7 GENERAL APPLICATION H7 series valves are designed for safe, repetitive bubble-tight closure,
ProMinent EXtronic Solenoid Diaphragm Metering Pumps
Overview: EXtronic Ideal for explosion-proof applications (see page 126 for spare parts) The ProMinent EXtronic series represents a proven technology for metering liquid media in hazardous areas classified
NDP-25 Specifications
NDP-25 Specifications Port Dimensions (46.2 GPM Max.) Intake & discharge connection: Polypropylene (PPG) Kynar (PVDF) Aluminum (ADC-12) Stainless Steel (316) Cast Iron Air inlet (incl. ball valve): Air
Series C9 Electronic Metering Pump. Specification Sheet and Assembly Details Manual No : 1619, 1795 Rev. : G, E Rev. Date : 6/09, 10/2015
INJECTION CHECK VALVE COUPLING NUT DISCHARGE TUBING 4 FUNCTION VALVE PUMP HEAD SPACER, E.P.U. METERING PUMP HOUSING RETURN LINE (PRESSURE RELIEF) SPEED KNOB STROKE KNOB SUCTION FITTING SUCTION TUBING WEIGHT
DATA SHEET 4DX10ER, 4DX15ER, 4DX20ER, 4DX27ER, 4DX30ER DIRECT DRIVE PLUNGER PUMPS. Brass Electric Models: SPECIFICATIONS U.S. Measure Metric Measure
DATA SHEET DIRECT DRIVE PLUNGER PUMPS Brass Electric Models: 4DX10ER, 4DX15ER, 4DX20ER, 4DX27ER, 4DX30ER See page 8 for complete pump model number selection. FEATURES Fits standard 56C face motors. Stacked
Accessories Guide ph/orp/conductivity Sensors
Jet Cleaners and Scrubber Accessories Isolation Ball Valves Assemblies Compression Fittings and Sheath Sets High Pressure (2500 PSIG) Sensor Housings In-line Flow Cells Nut Lock Union Style Adapters Sensor
115 Series, Needle Valves, Single Block, Male x Male
115 Series, Needle Valves, Single Block, Male x Male Conformance Standards NACE MR0175 / ISO 15156, NACE MR0103 / ISO 17495 CRN (Canadian Registration Number) Approved/Registered ASTM B31.3 Process Piping,
S E LV Ball Valves VA
VALVES Ball Valves VNE 18 2 - WAY BALL VALVE SPECIFICATIONS BALL VALVES BALL VALVES... Ball Valves are used in a wide variety of high pressure applications. Two factors make them popular. First, a full
ProMinent EXtronic Solenoid Diaphragm Metering Pumps
Overview: EXtronic Ideal for explosion-proof applications (see page 128 for spare parts) The ProMinent EXtronic series represents a proven technology for metering liquid media in hazardous areas classified
Signet DryLoc ph/orp Electrodes
Signet 2774-2777 DryLoc ph/orp Electrodes Features Patented DryLoc connector with gold plated contacts* Special design allows for installation at any angle, even inverted or horizontal Quick temperature
Model descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.
Conductivity Sensors. Model 140, 141, 142. Product Data Sheet series/rev.b February 2011
Product Data Sheet 71-140 series/rev.b February 2011 Model 140, 141, 142 Conductivity Sensors RUGGED CONSTRUCTION withstands high temperature and pressure TWO MOUNTING CONFIGURATIONS: screw-in and retractable
Type. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 462 Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 461.16-E Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring
Air Powered Double Diaphragm Pumps
Air Powered Double Diaphragm Pumps Notes. TC-X 030 Series Standard Diaphragm Pumps with 1/4" Connections Liquid Flow Rate: Maximum Air Inlet Pressure: Wetted Body Material Options; 1 to 8 L/min. (2.14
G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
D/G-35 Series. Up to 37gpm (140 l/min) D/g-35 hydra-cell diaphragm pump. D/G-35 Specialized Designs
D/g-35 hydra-cell diaphragm pump D/G-35 Series Up to 37gpm (14 l/min) D/G-35 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
BULLETIN 340B. Sethco FLOWS TO 275 GPM. Seal-less, End Suction Magnetic Drive Centrifugal Pumps. For Corrosive Liquid and Chemical Transfer
BULLETIN 34B FLOWS TO 275 GPM Sethco Seal-less, End Suction Magnetic Drive Centrifugal Pumps For Corrosive Liquid and Chemical Transfer SETHCO END SUCTION CORROSION RESISTANT MAGNETIC DRIVE, SEAL-LESS
Single, oversized roller compresses a low friction hose through a full 360-degrees of rotation
Graco EP Series Peristaltic Hose Pump Technology Single, oversized roller compresses a low friction hose through a full 360-degrees of rotation More flow per revolution than conventional designs Inexpensive
Multi-Port Gauge Valves M5 and M51
Multi-Port Gauge Valves M5 and M51 M5 Product Overview The M5 and M51 are multi-port gauge valves allowing the versatile positioning of gauges or pressure switches without requiring additional penetration
INSTALLATION AND SERVICE MANUAL FOR TURBO-CARB HIGH CAPACITY CARBONATOR
Please refer to the Lancer web site (www.lancercorp.com) for information relating to Lancer Installation and Service Manuals, Instruction Sheets, Technical Bulletins, Service Bulletins, etc. INSTALLATION
Versatile, Reliable Pumps for a Wide Range of Applications D10 Series
Versatile, Reliable Pumps for a Wide Range of Applications D10 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
3/8-inch [9.5 mm] (optional 5/8-inch [16 mm]) bore, 6000 psig [414 barg], API Firesafe 607 rated
![3/8-inch [9.5 mm] (optional 5/8-inch [16 mm]) bore, 6000 psig [414 barg], API Firesafe 607 rated](/thumbs/85/92772568.jpg "3/8-inch [9.5 mm] (optional 5/8-inch [16 mm]) bore, 6000 psig [414 barg], API Firesafe 607 rated")
M50 and H70 ANDERSON GREENWOOD 3/8-inch [9.5 mm] (optional 5/8-inch [16 mm]) bore, 6000 psig [414 barg], API Firesafe 607 rated Features and Benefits Cost savings are realized as the root valves are in-line
Hydra-Cell Metering Accessories and Options
Hydra-Cell Metering Accessories and Options P Series System Illustration PULSATION DAMPENER (OPTIONAL) BACK PRESSURE VALVE RELIEF VALVE (To process) PRESSURE GAUGE CALIBRATION CYLINDER CONTROLLERS & MOTORS
EXCEL EXCEL XR DATA SHEET. Metering Pump. Manual, Enhanced, and Communications Models. Applications. Performance Specifications. Features and Benefits
EXCEL XR Metering Pump EXCEL XR Manual, Enhanced, and Communications Models The EXCEL XR metering pump is a mechanically actuated diaphragm pump driven by advanced variable speed technology to provide
Selection Guide for P Series Pump Accessories & Options
Selection Guide for P Series Pump Accessories & Options Contents Page Calibration Cylinders...2 Back Pressure & Pressure Relief Valves...3 Pulsation Dampeners...6 Motors & Controllers...9 Calibration Cylinders
ANDERSON GREENWOOD SERIES M9 BLOCK AND BLEED GAUGE VALVES
A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation FEATURES GENERAL APPLICATION
OPERATION MANUAL. ALUMINUM Models. 316 S.S. Models NTG25 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS. A JDA Global Company. 1/14 rev.
OPERATION MANUAL NTG25 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS ALUMINUM Models 316 S.S. Models A JDA Global Company 1/14 rev. 3 CAUTION SAFETY POINTS TEMPERATURE LIMITS: Neoprene -17.8 C to
G20 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G20 Close-coupled with Brass pump head ATEX. G20 Version 5 10/16
G20 Series Maximum Flow Rate: Maximum Pressure: 3.8 l/min (1.0 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G20 Close-coupled with Brass pump head G21
G03 Mono-Block Series
G03 Mono-Block Series Maximum Flow Rate: 11.7 l/min (3.1 gpm) Maximum Pressure: 103 bar (1500 psi) for Metallic Pump Heads ATEX Mono-Block (G03) Shaft-driven with Stainless Steel pump head Mono-Block (G03)
Valve Accessories NEW! Wanner Engineering Inc
Valve Accessories NEW! Wanner Engineering Inc Back Pressure Valves Diaphragm Back Pressure Valves enhance the performance of precision metering systems by applying a continuous back pressure to the EPM
BULLETIN 350A. Sethco FLOWS TO 225 GPM. Seal-less, Self Priming, Magnetic Drive Centrifugal Pumps. For Corrosive Liquid and Chemical Transfer
BULLETIN 350A FLOWS TO 225 GPM Sethco Seal-less, Self Priming, Magnetic Drive Centrifugal Pumps For Corrosive Liquid and Chemical Transfer SETHCO CORROSION RESISTANT SELF PRIMING MAGNETIC-DRIVE, SEAL-LESS
Type. 437 Safety Relief Valves spring loaded
Type Packed knob H4 437 Safety Relief Valves spring loaded Packed knob H4 Flanged connection Cap H2 Contents Chapter/Page Materials Available designs 01/02 Available designs materials 01/03 How to order
C Series Valves C24 1-1/4 NPT/BSPT C23 1 NPT/BSPT C22 3/4 NPT/BSPT. C22/C23/C24 Series (See page 88)
C Series Valves Accurate, repeatable Minimal pressure surge Smooth, chatter-free bypass Adjustable Easy to service No external springs or moving parts Various seal material Stainless steel or brass bodies
Type 459. Type. 459 Safety Relief Valves spring loaded
Type Plain lever H3 459 Safety Relief Valves spring loaded Contents Chapter/Page Cap H2 Materials Available designs 05/02 Available designs materials 05/03 How to order Numbering system 05/04 Article numbers
D/G-10 Series. Up to 8 gpm (30.3 l/min) D/g-10 hydra-cell diaphragm pump. D/G-10 Specialized Designs
D/g-1 hydra-cell diaphragm pump D/G-1 Series Up to 8 gpm (3.3 l/min) D/G-1 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete
Versatile, Reliable Pumps for a Wide Range of Applications D66 Series
Versatile, Reliable Pumps for a Wide Range of Applications D66 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
Liquid Conductivity Two & Four Electrode Sensors
Industrial Process Control & Monitoring Rugged Two Electrode Conductivity Sensors Unique Four Electrode Conductivity Sensors Versatile Installation Options (Threaded, Quick Change, Retractable) Specialized
SCHMITT. product information. Kreiselpumpen. U Pump Series. normal priming, centrifugal pumps with a single mechanical seal.
SCHMITT Kreiselpumpen chemical resistant pumps for corrosive and highly pure media product information U Pump Series normal priming, centrifugal pumps with a single mechanical seal materials: PVDF Description
Anderson Greenwood Series M9 Block and Bleed Gauge Valves
A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation Features General application