NOTES: MADE IN THE U.S.A. U.S. PATENT No. 5,863,128. U.S. No. 3,852,076 AND INTERNATIONAL REGISTERED TRADEMARKS

Transcription

1 NOTES: 1. MADE IN THE U.S.A. 2. U.S. PATENT No. 5,863, U.S. No. 3,852,76 AND INTERNATIONAL REGISTERED TRADEMARKS 4. MATERIAL: GLASS FILLED POLYPROPYLENE (PP) OR POLYVINYLIDENE FLUORIDE (PVDF) OR NATURAL POLYVINYLIDENE FLUORIDE (N-PVDF) OR ETHYLENE CHLOROTRIFLUOROETHYLENE (ECTFE) / CONNECTION: 2" MNPT OR BSPT SUCTION PORT CONNECTION: 1-1/4" MNPT OR BSPT 1-1/4" MNPT OR BSPT 7. FOR INSTALLATION RECOMMENDATIONS REFER TO MAZZEI TECHNICAL BULLETINS No. 4, No. 5, No. 6, No. 1 AND No. 11, WHICH CAN BE FOUND AT 8. MAZZEI INJECTOR CO., LLC. 5 ROOSTER DR. BAKERSFIELD, CA 9337 TEL: WEB: 2" MNPT OR BSPT (TYPICAL) INJECTOR BODY MAZZEI PART NO.'S 281-A PP 281-A PVDF 281-A N-PVDF 281-A ECTFE ISO 281A PVDF ISO 281A GRPP UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TITLE: 2" INJECTOR; MODEL 281-A DRAWN: G. NOVINS DATE: 7/23/214 SIZE: APPROVED: T. JOHNS A DRAWING NO.: 281-A WEIGHT: SCALE: REV.: SHEET: N/A 1:3 B 1 OF 2

2 (ISOMETRIC VIEW) (FOR REFERENCE ONLY) 13mm 5.1in 292mm 11.5in SUCTION PORT 67mm 2.66in 64mm 2.5in 93mm 3.65in MODEL NO. LOCATION (OPPOSITE) FLOW 58mm 2.3in (ACROSS FLATS) UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TITLE: 2" INJECTOR; MODEL 281-A DRAWN: G. NOVINS DATE: 7/23/214 SIZE: APPROVED: T. JOHNS A DRAWING NO.: 281-A WEIGHT: SCALE: REV.: SHEET: N/A 1:3 B 2 OF 2

3 NOTES: MADE IN THE U.S.A. U.S. PATENT No. 5,863,128 U.S. No. 3,852,76 AND INTERNATIONAL REGISTERED TRADEMARKS MATERIAL: NATURAL POLYVINYLIDENE FLUORIDE (N- PVDF). / CONNECTION: 2" DIA, TRI-CLAMP SUCTION PORT CONNECTION: 1-1/4" MNPT FOR INSTALLATION RECOMMENDATIONS REFER TO MAZZEI TECHNICAL BULLETINS No. 4, No. 5, No. 6, No. 1 AND No. 11, WHICH CAN BE FOUND AT MAZZEI INJECTOR CO., LLC. 5 ROOSTER DR. BAKERSFIELD, CA 9337 TEL: WEB: 1-1/4'' MNPT 2'' DIA, TRI-CLAMP (TYPICAL) INJECTOR BODY MAZZEI PART NO'S 281-TC N-PVDF UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TITLE: 2'' INJECTOR; MODEL 281-TC DRAWN: J. PEREZ DATE: 9/25/214 SIZE: APPROVED: T. JOHNS A DRAWING NO.: 281-TC WEIGHT: SCALE: REV.: SHEET: N/A 1:3 A 1 OF 2

4 (ISOMETRIC VIEW) (FOR REFERENCE ONLY) 297mm 11.7in 64mm 2.51in 13mm 5.1in SUCTION PORT 64mm 2.5in 95mm 3.76in MODEL NO. LOCATION (OPPOSITE) FLOW UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TITLE: 2'' INJECTOR; MODEL 281-TC DRAWN: J. PEREZ DATE: 9/25/214 SIZE: APPROVED: T. JOHNS A DRAWING NO.: 281-TC WEIGHT: SCALE: REV.: SHEET: N/A 1:3 A 2 OF 2

5 NOTES: MADE IN THE U.S.A. U.S. PATENT No. 5,863,128 U.S. No. 3,852,76 AND INTERNATIONAL REGISTERED TRADEMARKS MATERIAL: MATERIAL: NATURAL POLYVINYLIDENE FLUORIDE (N-PVDF) / CONNECTION: 2'' DIA, TRI CLAMP SUCTION PORT CONNECTION: 1-1/2'' DIA, TRI CLAMP FOR INSTALLATION RECOMMENDATIONS REFER TO MAZZEI TECHNICAL BULLETINS No. 4, No. 5, No. 6, No. 1 AND No. 11, WHICH CAN BE FOUND AT MAZZEI INJECTOR CO., LLC. 5 ROOSTER DR. BAKERSFIELD, CA 9337 TEL: WEB: 1-1/2'' DIA., TRI-CLAMP 2'' DIA., TRI CLAMP (TYPICAL) INJECTOR BODY MAZZEI PART NO. 281-TC3 N-PVDF UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TITLE: 2" INJECTOR; MODEL 281-TC3 DRAWN: J. PEREZ DATE: 9/23/214 SIZE: APPROVED: T. JOHNS A DRAWING NO.: 281-TC3 WEIGHT: SCALE: REV.: SHEET: N/A 1:3 B 1 OF 2

6 (ISOMETRIC VIEW) (FOR REFERENCE ONLY) 297mm 11.7in 65mm 2.54in 13mm 5.1in SUCTION PORT 64mm 2.5in 96mm 3.77in MODEL NO. LOCATION (OPPOSITE) FLOW UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TITLE: 2" INJECTOR; MODEL 281-TC3 DRAWN: J. PEREZ DATE: 9/23/214 SIZE: APPROVED: T. JOHNS A DRAWING NO.: 281-TC3 WEIGHT: SCALE: REV.: SHEET: N/A 1:3 B 2 OF 2

7

8

9 NOTES: 1. MATERIAL OF CONSTRUCTION: CD3MN/225 DUPLEX STAINLESS STEEL REVISIONS REV. DESCRIPTION DATE APPROVED NC RELEASED FOR SUBMITTAL. 11/9/212 P. BANKOWSKI MTR/HEAT NUMBERS ARE PROVIDED "AS BUILT" AND SHALL MEET APPLICABLE MATERIAL SPECIFICATIONS. FLANGE BOLTS HOLES TO STRADDLE COMMON CENTERLINES, UNLESS OTHERWISE NOTED. / CONNECTION: 2" DIA., ANSI B16.5, CLASS 15, SCHED. 4, RAISED FACE - WELD NECK FLANGE. SUCTION PORT CONNECTION: 1.25" DIA., ANSI B16.5, CLASS 15, SCHED. 4, RAISED FACE - WELD NECK FLANGE. WELDING JOINTS TO BE COMPLETE JOINT PENETRATION, WHERE POSSIBLE. DYE PENETRANT TESTING IN ACCORDANCE WITH ASME B31.3 NORMAL SERVICE RECOMMENDATIONS WILL BE PERFORMED ON A MINIMUM OF 2% OF LINEAR LENGTH OF WELDS; OR HYDROSTATIC TESTING WILL BE PERFORMED AS PART OF MAZZEI'S NON- DESTRUCTIVE TESTING PROCEDURE. CLEANED FOR PASSIVATION PER ASTM A38 GUIDELINES. PASSIVATED PER ASTM A967 SPECIFICATION. WELD MAP, NON DESTRUCTIVE TESTING (NDT), CLEANING AND INSPECTION REPORTS TO BE PROVIDED BY MAZZEI. MAZZEI RECOMMENDS INSTALLING THE INJECTOR IN A HORIZONTAL POSITION OR IN A VERTICAL POSITION WITH THE LIQUID FLOW UP. MAZZEI DOESN'T HAVE ANY PREFERENCE FOR THE POSITION OF THE GAS CONNECTION, IT CAN POINT IN ANY DIRECTION, TOP, BOTTOM OR ON THE SIDE. (ISOMETRIC VIEW) (FOR REFERENCE ONLY) SUBMITTAL DRAWING SUBMITTAL NOTICE ANY RECOMMENDATIONS FOR PRODUCT AND/OR SYSTEM DESIGN, WHETHER CONTAINED IN A DOCUMENT, WITHIN THIS DRAWING, COMMUNICATED BY ELECTRONIC MEANS OR GIVEN VERBALLY, ARE INTENDED SOLELY AS GUIDELINES TO ACTUAL SYSTEM DESIGN. SAID RECOMMENDATIONS ARE BASED UPON INFORMATION SUPPLIED BY OTHERS, THE ACCURACY OF WHICH IS BEYOND VERIFICATION BY MAZZEI INJECTOR CO. LLC. THEREFOR MAZZEI CANNOT AND DOES NOT WARRANT THE SUITABILITY OF ITS PRODUCTS FOR A PARTICULAR SERVICE NOR THE PERFORMANCE OF ANY SYSTEM CONTAINING COMPONENTS MADE OR SOLD BY MAZZEI. CONFIDENTIALITY NOTICE THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MAZZEI INJECTOR COMPANY LLC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF MAZZEI IS STRICTLY PROHIBITED. DRAWING MAY NOT BE PRINTED FULL SIZE DO NOT SCALE UNLESS OTHERWISE SPECIFIED DIM ARE IN INCHES TOL ON ANGLE.1/2 1 PL PL.6 3 PL.3 INTERPRET DIM AND TOL PER ASME Y14.5M-1994 THIRD ANGLE PROJECTION APPROVALS DRAWN: CHECKED: T. JOHNS J. BENNETT APPROVED: P. BANKOWSKI QA: CUSTOMER: - CUSTOMER APPROVAL: - NA DATE 11/9/212 11/9/212 11/9/212 TITLE: MAZZEI INJECTOR CO., LLC 5 ROOSTER DRIVE BAKERSFIELD, CA 9337 PHONE: (661) FAX: (661) INJECTOR; MODEL SSC281-M SIZE: JOB NO.: DRAWING NUMBER: REV: B NA SSC281MAA-SUB NC NONE 21 LBS 1 OF 2 SCALE: WEIGHT: SHEET:

10 (TOP VIEW) (OVERALL) SUCTION PORT (OVERALL) FLOW (SIDE VIEW) (END VIEW) TITLE: MAZZEI INJECTOR CO., LLC 5 ROOSTER DRIVE BAKERSFIELD, CA 9337 PHONE: (661) FAX: (661) INJECTOR; MODEL SSC281-M SIZE: JOB NO.: DRAWING NUMBER: REV: B NA SSC281MAA-SUB NC 1:4 21 LBS 2 OF 2 SCALE: WEIGHT: SHEET:

11 NOTES: 1. MATERIAL OF CONSTRUCTION: CD3MN STAINLESS STEEL 2. MTR/HEAT NUMBERS ARE PROVIDED "AS BUILT" AND SHALL MEET APPLICABLE MATERIAL SPECIFICATIONS. REVISIONS REV. DESCRIPTION DATE APPROVED NC RELEASED FOR SUBMITTAL. 4/12/213 P. BANKOWSKI / CONNECTION: 2" DIA., SANITARY TRI-CLAMP FITTING MATERIAL: CD3MN SPECIFICATION: ASME BPE-29 SUCTION PORT CONNECTION: 1.5" DIA., SANITARY TRI-CLAMP FITTING MATERIAL: CD3MN SPECIFICATION: ASME BPE-29 WELDING JOINTS TO BE COMPLETE JOINT PENETRATION, WHERE POSSIBLE. DYE PENETRANT TESTING IN ACCORDANCE WITH ASME B31.3 NORMAL SERVICE RECOMMENDATIONS WILL BE PERFORMED ON A MINIMUM OF 2% OF LINEAR LENGTH OF WELDS; OR HYDROSTATIC TESTING WILL BE PERFORMED AS PART OF MAZZEI'S NON- DESTRUCTIVE TESTING PROCEDURE. CLEANED FOR PASSIVATION PER ASTM A38 GUIDELINES. PASSIVATED PER ASTM A967 SPECIFICATION. WELD MAP, NON DESTRUCTIVE TESTING (NDT), CLEANING AND INSPECTION REPORTS TO BE PROVIDED BY MAZZEI. 1. MAZZEI RECOMMENDS INSTALLING THE INJECTOR IN A HORIZONTAL POSITION. INJECTORS MAY BE INSTALLED IN A VERTICAL POSITION WITH THE LIQUID FLOW UPWARDS. HOWEVER, IN CERTAIN APPLICATIONS THIS MAY AFFECT PERFORMANCE. PLEASE REFER TO MAZZEI TECHNICAL BULLETIN No. 11; "MAZZEI INJECTOR INSTALLATION RECOMMENDATIONS FOR GAS TO LIQUID MIXING APPLICATIONS". (ISOMETRIC VIEW) (FOR REFERENCE ONLY) SUBMITTAL DRAWING SUBMITTAL NOTICE ANY RECOMMENDATIONS FOR PRODUCT AND/OR SYSTEM DESIGN, WHETHER CONTAINED IN A DOCUMENT, WITHIN THIS DRAWING, COMMUNICATED BY ELECTRONIC MEANS OR GIVEN VERBALLY, ARE INTENDED SOLELY AS GUIDELINES TO ACTUAL SYSTEM DESIGN. SAID RECOMMENDATIONS ARE BASED UPON INFORMATION SUPPLIED BY OTHERS, THE ACCURACY OF WHICH IS BEYOND VERIFICATION BY MAZZEI INJECTOR CO. LLC. THEREFOR MAZZEI CANNOT AND DOES NOT WARRANT THE SUITABILITY OF ITS PRODUCTS FOR A PARTICULAR SERVICE NOR THE PERFORMANCE OF ANY SYSTEM CONTAINING COMPONENTS MADE OR SOLD BY MAZZEI. CONFIDENTIALITY NOTICE THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MAZZEI INJECTOR COMPANY LLC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF MAZZEI IS STRICTLY PROHIBITED. DRAWING MAY NOT BE PRINTED FULL SIZE DO NOT SCALE APPROVALS DATE UNLESS OTHERWISE SPECIFIED DIM ARE IN INCHES DRAWN: 5 ROOSTER DRIVE BAKERSFIELD, CA 9337 TOL ON ANGLE.1/2 T. JOHNS 4/12/213 PHONE: (661) FAX: (661) PL PL.6 3 PL.3 CHECKED: INTERPRET DIM AND TOL PER J. MILLAN 4/12/213 TITLE: ASME Y14.5M-1994 APPROVED: THIRD ANGLE PROJECTION P. BANKOWSKI QA: CUSTOMER: - CUSTOMER APPROVAL: - NA 4/12/213 SIZE: JOB NO.: DRAWING NUMBER: REV: SCALE: MAZZEI INJECTOR CO., LLC INJECTOR; MODEL SSC281-M B NA SSC281MBB-SUB NC WEIGHT: SHEET: NONE 6 LBS 1 OF 2

12 12.41 (OVERALL) 3.93 SUCTION PORT (OVERALL) FLOW (SIDE VIEW) (END VIEW) TITLE: MAZZEI INJECTOR CO., LLC 5 ROOSTER DRIVE BAKERSFIELD, CA 9337 PHONE: (661) FAX: (661) INJECTOR; MODEL SSC281-M SIZE: JOB NO.: DRAWING NUMBER: REV: B NA SSC281MBB-SUB 1:2 6 LBS SCALE: WEIGHT: SHEET: NC 2 OF 2

13

14

15 Copyright 216 REV Mazzei Company, LLC 5 Rooster Drive, Bakersfield, CA USA Operating Pressure PSIG TEL FAX WATER SUCTION Motive Flow GPM Water Suction GPH 629 Operating Pressure PSIG WATER SUCTION Motive Flow GPM Water Suction GPH *(4.5) *(5.) *(9.) *(13.3) *(58.5) *(17.5) *(22.3) *(66.5) *(26.) *(3.5) *(75.5) *(33.5) *(83.) *(38.) *(41.5) *(1.9) *NUMBERS IN PARENTHESIS indicate the injector outlet pressure when suction stops (Zero Suction Point). Water Suction Capacity Performance Table Model 281

16 Copyright 216 REV Mazzei Company, LLC 5 Rooster Drive, Bakersfield, CA USA TEL FAX Operating Pressure WATER SUCTION Operating Pressure kg/cm 2 kg/cm 2 Inlet Outlet Motive Flow l/min Water Suction l/hr 2,384 Inlet Outlet WATER SUCTION Motive Flow l/min Water Suction l/hr 2, , , , , ,387 *(.32) ,387 2, , , , , , *(3.52) *(.63) 113 2,387 2, , , , , , , *(.94) ,387 2, ,2.35 2, , , , , *(4.11) *(1.23) 574 2,387 2, , , , , , , , *(1.57) ,387 2, , , , , , , *(4.68) ,292 2, *(1.83) ,387 2, , , , , , , , , , *(2.14) , *(5.31) , , , , *(2.36) ,387 2, , , , , , , , , *(5.84) ,921 2, , , *(2.67) ,387 2, , , , , , , , , , , , , , , , *(2.92) *(7.9) *NUMBERS IN PARENTHESIS indicate the injector outlet pressure when suction stops (Zero Suction Point). Water Suction Capacity - METRIC Performance Table Model 281

17 Copyright 216 REV Mazzei Company, LLC 5 Rooster Drive, Bakersfield, CA USA Operating Pressure PSIG TEL FAX AIR SUCTION Motive Flow GPM Air Suction SCFM Operating Pressure PSIG AIR SUCTION Motive Flow GPM Air Suction SCFM *(4.1) *(5.).78 8 *(9.) *(13.3) *(58.5) *(17.5) *(22.3) *(66.5) *(26.) *(3.5) *(75.8) *(33.5) *(82.) *(38.) *(41.5) 1 *(1.4).72 *NUMBERS IN PARENTHESIS indicate the injector outlet pressure when suction stops (Zero Suction Point). Air Suction Capacity Performance Table Model 281

18 Copyright 216 REV Mazzei Company, LLC 5 Rooster Drive, Bakersfield, CA USA TEL FAX Operating Pressure Operating Pressure AIR SUCTION kg/cm 2 kg/cm Motive Flow l/min Air Suction l/min AIR SUCTION Motive Flow l/min Air Suction l/min *(.29) *(3.52) *(.63) *(.94) *(4.11) *(1.23) *(1.57) *(4.68) *(1.83) *(2.14) *(5.33) *(2.36) *(5.77) *(2.67) *(2.92) 7.3 *(7.6) 2.3 *NUMBERS IN PARENTHESIS indicate the injector outlet pressure when suction stops (Zero Suction Point). Air Suction Capacity - METRIC Performance Table Model 281